WATER, OIL, CONTAMINANTS: SEPARATION AND EVACUATION

Size: px

Start display at page:

Download "WATER, OIL, CONTAMINANTS: SEPARATION AND EVACUATION"

Nathan Fields
5 years ago
Views:

drains SEPARATORS, BLEED VALVES AND PROCESSING UNITS

Condensates collected by filtration or separation along

evacuated to avoid contaminating the circuit and

Separators, bleed valves and processing units provide

the network, the locations to be drained and the

Installation of bleed valves goes hand in hand with

1 drains SEPARATORS, BLEED VALVES AND PROCESSING UNITS WATER, OIL, CONTAMINANTS: SEPARATION AND EVACUATION Condensates collected by filtration or separation along the air network must be quickly and effectively evacuated to avoid contaminating the circuit and damaging pneumatic devices. Separators, bleed valves and processing units provide effective solutions for evacuating and processing effluents. The type of bleed device to use depends on the scale of the network, the locations to be drained and the accessibility of the air line. Installation of bleed valves goes hand in hand with correct filtration of compressed air. A correctly equipped network ensures the efficient operation of pneumatic tools and is a prerequisite for high-quality work. General Catalogue 362

2 MODEL 1 TIMED ELECTRICAL BLEED VALVES LOCATION OPERATION ADVANTAGES Low points, tanks in compressors, dryers, separators, filters. Comprising a timer and solenoid valve, timed electrical bleed valves open at intervals (programmed by the user) to evacuate accumulated contaminants. -D epending on the degree of contamination and humidity in pipes: - choice of bleed valve opening duration - choice of bleed valve opening frequency - Compact assembly. - For integration in all positions, at all locations. Low points, tanks of all types of filter. Condensates are drained automatically through a magnetically-operated valve. When the water reaches a certain level, a float opens a magnetic valve. Once the water has drained, the float falls and closes the valve. - No loss of compressed air. - No electric power supply. - No adjustment. Maintenance by simple cleaning. - High discharge capacity. - Corrosion-resistant aluminium body. - No risks of condensates emulsifying. 2 AGNETIC BLEED M VALVES 3 MECHANICAL FLOAT-TYPE BLEED VALVES Low points, ends of lines. As the water level rises in the bleed bowl, the float lifts up and opens the bowl. Once the condensates have been drained, the float drops and closes the orifice. - Automatic and self-contained bleed system. No loss of compressed air. Evacuation of waterborne emulsions (oil). Sturdy construction. 4 EPARATOR WITH S AUTOMATIC BLEED Compressor outlets, tank outlets, pre-filters for refrigeration dryers or submicron filters. The separator fulfils two purposes: - the air entering the separator is driven into a cyclone system with fins that separate out water, oil and solid particles - condensates are then eliminated by a floattype bleed valve - Double action: separation and evacuation Possibility of high inlet temperatures Sturdy construction Advantages of float-type bleed devices Cost-effective and dependable operation 5 CONDENSATE PROCESSING UNIT Collects all condensates discharged by a facility. Discharges from lubricated compressors are environmentally harmful. By collecting pollutants and treating them directly in a processing unit, even very low quantities of oil can be concentrated and recovered. -C ost-effective solution for effluent treatment and environmental protection - Reduced costs due to simplicity of operation Quick return on investment - Easy to install and use - No specific power supply required General Catalogue 363

AUTOMATIC ELECTRIC DRAIN VALVES Drain cycle 0.5-45 min Drain opening 0.5-10 sec For use with 24-220V 50 Hz ID Passage 4.

kit with : - Programmable timer - 220 V solenoid for evacuating condensates - Drain trap with 1/4 turn shut-off valve - 1,2 m power lead - Ø 8 mm push fitting - 30 cm of polyurethane pipe Ø 8 mm 98

shut-off valve 80 115 43 G 1/2 inlet - G 3/8 outlet TEMP 38220COL Automatic drain valve with timer and solenoid 43 115 G 1/8 inlet / outlet - 220 V TEMP 18220V 43 115 G 1/4 inlet / outlet - 220 V

3 AUTOMATIC ELECTRIC DRAIN VALVES Drain cycle min Drain opening sec For use with V 50 Hz ID Passage 4.5 mm Drain in any position Water, oil, condensates 1 path usually closed 0-16 bar +2 C C Connection ISO 4400 Protection IP 65 Automatic drain valve kit A B C DESCRIPTION REFERENCE Ready to use kit with : - Programmable timer V solenoid for evacuating condensates - Drain trap with 1/4 turn shut-off valve - 1,2 m power lead - Ø 8 mm push fitting - 30 cm of polyurethane pipe Ø 8 mm G 3/8 or G 1/2 inlet - G 3/8 outlet TEMP 38220KIT Complete automatic drain valve kit Includes : - Programmable timer V solenoid for evacuating condensates - Drain trap with 1/4 turn shut-off valve G 1/2 inlet - G 3/8 outlet TEMP 38220COL Automatic drain valve with timer and solenoid G 1/8 inlet / outlet V TEMP 18220V G 1/4 inlet / outlet V TEMP 14220V G 3/8 inlet / outlet V TEMP 38220V G 1/2 Gas inlet / outlet V TEMP 12220V Economy series complete automatic drain valve kit Includes : - Programmable timer V solenoid for evacuating condensates - Drain trap with 1/4 turn shut-off valve G 1/2 inlet - G 3/8 outlet TEMP 38220COLSE Economy series automatic electric drain valve 220 V only Ø 4 mm passage : 0 to 16 bar Thread : G 1/4 TEMP 14220SE G 3/8 TEMP 38220SE 364

AUTOMATIC ELECTRIC DRAIN VALVES Drain cycle 0.5-45 min Drain opening 0.

5 mm Drain in any position Water, oil, condensates 1 path usually closed 0-16 bar +2 C - +65 C Connection ISO

Thread : G 1/8 Opening time : 2 sec Interval : 1 to 120 mn 220 V Manual opening test MICRO'AIR G 1/8 sump adaptor

40 bar pressure Ø 2 mm passage TEMP 14220HP Automatic electric drain valve for food applications Stainless steel

14220INOX Parts 43 115 1.Timer 24 to 240 V AC or DC 41 53 2.

voltage 110 V BOB 110VA 41 53 Standard voltage 220 V BOB 220VA 74 40 3.

4 AUTOMATIC ELECTRIC DRAIN VALVES Drain cycle min Drain opening sec For use with V 50 Hz ID Passage 4.5 mm Drain in any position Water, oil, condensates 1 path usually closed 0-16 bar +2 C C Connection ISO 4400 Protection IP 65 Mini automatic electric drain valve for filter sump A B C DESCRIPTION REFERENCE Thread : G 1/8 Opening time : 2 sec Interval : 1 to 120 mn 220 V Manual opening test MICRO'AIR G 1/8 sump adaptor FAP 18 TEMP MN220V High-pressure automatic electric drain valve : from 0 to 40 bar G 1/4 thread 220 V 0 to 40 bar pressure Ø 2 mm passage TEMP 14220HP Automatic electric drain valve for food applications Stainless steel solenoid G 1/4 thread 220 V 0 to 40 bar pressure 304 stainless steel solenoid valve Ø 4,5 mm passage TEMP 14220INOX Parts Timer 24 to 240 V AC or DC Coil 50 Hz alternative Standard voltage 24 V TEMP BOB 24VA Standard voltage 48 V BOB 48VA Standard voltage 110 V BOB 110VA Standard voltage 220 V BOB 220VA G 1/8 solenoid valve ELV G 1/4 solenoid valve ELV G 3/8 solenoid valve ELV G 1/2 solenoid valve ELV High pressure solenoid 0 to 40 bar G 1/4 ELV 14HP stainless steel solenoid G 1/4 ELV 14INOX Drain trap with shut-off valve G 1/2 male inlet - G 3/8 male outlet COL

5 mm Drain in any position Water, oil, condensates 1 path usually closed 0-16 bar +2 C - +65 C

DESCRIPTION REFERENCE 43 74 Timer TEMP SE 63 35 Solenoid valve with 220 V coil G 1/4 ELV 14SE

condensates Drain outlet 8 mm groove Construction Anodised Aluminium 1 to 16 bar 1 C to 70 C

with float drain A B C D Flow rate Mini in m³/h - DP = 1% Weight Female thread BSP Gas Flow

5 105 2,2 G 3/4 252 SPC 210 344 139 297.5 24.5 160 2.5 G 1 384 SPC 320 548 190 485 24.

5 AUTOMATIC ELECTRIC DRAIN VALVES Drain cycle min Drain opening sec For use with V 50 Hz ID Passage 4.5 mm Drain in any position Water, oil, condensates 1 path usually closed 0-16 bar +2 C C Connection ISO 4400 Protection IP 65 Economy series automatic drain valves part A B C DESCRIPTION REFERENCE Timer TEMP SE Solenoid valve with 220 V coil G 1/4 ELV 14SE G 3/8 solenoid valve ELV 38SE WATER SEPARATOR Less servicing Evacuates Water, oil, condensates Drain outlet 8 mm groove Construction Anodised Aluminium 1 to 16 bar 1 C to 70 C Automatic float drain with float Post filter for compressor outlet Cyclone water separator with float drain A B C D Flow rate Mini in m³/h - DP = 1% Weight Female thread BSP Gas Flow rate Maxi in m³/h - DP = 1% G 1/2 144 SPC ,2 G 3/4 252 SPC G SPC ,7 G 1 1/2 540 SPC G SPC ,7 G SPC 1101 REFERENCE Drain for SPC SPC D1275 Wall bracket for SPC SPC K120 SPC K210 SPC K

MECHANICAL DRAIN VALVES Less servicing Threaded inlet Evacuates Water, oil, condensats Low ends

28 Automatic drain valve with float drain Threaded inlet: G 1/2 Drain outlet: Ø 8 mm Weight: 422 g

temperature: 80 C PAM 21 Parts kit for PAM 21 Float drain for PAM 21 PAM FLO Automatic mechanical

oils containing esters 216 116 Threaded inlet: G 1/2 Drain outlet: G 1/8 Drain flow rate at 7 bar:

6 MECHANICAL DRAIN VALVES Less servicing Threaded inlet Evacuates Water, oil, condensats Low ends Line ends Automatic float drain Automatic mechnical drain valve A B C DESCRIPTION REFERENCE Automatic drain valve with float drain Threaded inlet: G 1/2 Drain outlet: Ø 8 mm Weight: 422 g : 2 bar to 12 bar Max. temperature: 80 C PAM 21 Parts kit for PAM 21 Float drain for PAM 21 PAM FLO Automatic mechanical drain valve for high flow rates Warning : Polycarbonate bowl not compatible with thinners and some oils containing esters Threaded inlet: G 1/2 Drain outlet: G 1/8 Drain flow rate at 7 bar: 560 l/h Drain weight: 1960 g : 10 bar at 20 C : 2 C to 55 C PEA 21 Manual drain Manual drain G 1/8 MA Manual drain G 1/4 MA Manual drain G 3/8 MA

MAGNETIC DRAIN Construction Aluminium body - Viton seal Drain outlet 2 mm 2 C to 50 C Automatic float drain Less servicing Threaded inlet 2 x G 1/2 Low ends 16 bar Magnetic drain condensate draining

7 MAGNETIC DRAIN Construction Aluminium body - Viton seal Drain outlet 2 mm 2 C to 50 C Automatic float drain Less servicing Threaded inlet 2 x G 1/2 Low ends 16 bar Magnetic drain condensate draining A B DESCRIPTION REFERENCE Condensate is automatically drained by a magnetic valve. The valve opens when a float inside reaches a certain level and closes when the float drops back down. Zero air loss. No electricity required Condensates draining : 200 l/hour 2 connections : 1/2 female G inlet 1/8 female G outlet magnetic valve PMA 200 CONDENSATE SEPARATOR Environmentally friendly Quickly pays for itself Construction PE Efficient Oil and water separator Replacement filter cartridge Pre-filter Replacement filter cartridge carbon cartridge Treatment capacity m3/h Degree of separation Inlet Condensate Models 110, 480, 2100 and EXT : - Collect condensate from all types of purge (manual, automatic, electronic) - Separate all effluents, including stable emulsified oils - Separate mineral and synthetic oils 210CAFW 480CAFW 2100CAFW 210CAFB 480CAFB 2100CAFB EXTCAFB 0 to 108 m3/h Water outlet < 10 ppm G 1/2 G 1/ to 480 < 10 ppm 2 x G 1/2 G 1/ to 2100 < 10 ppm 4 x G 1/2 3 x G 1/ to 4200 < 10 ppm EXT REFERENCE 368

CONDENSATE SEPARATOR MAINTENANCE KITS Environmentally friendly Quickly pays for itself Construction PE Efficient Maintenance kit for oil and water separator DESCRIPTION Pre-filter cartridge for 210

8 CONDENSATE SEPARATOR MAINTENANCE KITS Environmentally friendly Quickly pays for itself Construction PE Efficient Maintenance kit for oil and water separator DESCRIPTION Pre-filter cartridge for 210 Activated carbon cartridge for 210 Pre-filtrer cartridge for 480 Activated carbon cartridge for 480 Pre-filter cartridge for 2100 Activated carbon cartridge for 2100 Activated carbon cartridge for EXT REFERENCE 210CAFW 210CAFB 480CAFW 480CAFB 2100CAFW 2100CAFB EXTCAFB 369

ADSORPTION DRYERS. For all applications which require perfectly dry compressed air : Advantages of "ALC" dryers :

ADSORPTION DRYERS. For all applications which require perfectly dry compressed air : Advantages of ALC dryers : ADSORPTION DRYERS For all applications which require perfectly dry compressed air : high quality air for laboratories, food processing, robotics, telecommunications, laser applications electronic instrumentation