Fan speed controller Type Saginomiya XGE

Transcription

1 Data sheet Fan speed controller Type Saginomiya Fan speed controller stabilizes condensing pressure by changing condenser s fan speed. The controller reduces fan noise and saves energy in low ambient conditions. Widespread usage in refrigeration and air conditioning units. Extensive performance testing under different conditions and strict quality control procedures ensure trouble free operation for many years. Compact size, reduced weight and high degree of protection means that it can be mounted directly on refrigeration lines. Panel mounting also possible. Easy adjusting made by the turn of a screw situated on the top surface. Specially designed heat dissipation radiator ensures no overheating and extended lifetime. version for EC fan motors. Features Wide regulating Compact design Male or female pressure Easy and adjusting Simple and easy electrical Cut off type or Minimum speed type Fitted with an electro-magnetic suppression filter DCS (az) DKRCC.PD.LC0.A2.02

2 Data sheet Fan speed controller Approvals CE in accordance to EMC directives, UL Function 00% 95% 0 Prop. 45% 35% Min. speed 50Hz 60Hz Output (V DC) prop. 6H (bar / psi) Set point 6H (bar / psi) Set point Fan speed controller keeps the condensing pressure at a steady level by regulating the speed of the AC/EC fan motors. When pressure is declining the controller decreases the output voltage changing the speed of AC/EC fan motor. The proportional is a non-adjustable pressure difference between max. and min. pressure where the regulation occurs. For min. pressure the controller can either operates with min. speed or completely cuts off the output voltage, depending on the type of the controller. saves energy and reduces noise by lowering the fan speed or cutting it off. Application example. Fan speed controller 2. Compressor 3. Evaporator 4. Expansion valve 5. Receiver 6. Condenser 6H Fig. Typical refrigeration system using fan speed controller DCS (az) DKRCC.PD.LC0.A2.02 2

3 Data sheet Fan speed controller Technical data Performance (EN 60770) Max. current 3A*) Min. current 0.2A Enclosure Max. working pressure Supply frequency IP65 47 bar / 68 psi 50 / 60 Hz Operating ambient temp C / -4 3 F Fluid temperature C / F Power supply Max. voltage output V AC 7/6-20UNF female (with depressor pin) and male 95% of supply voltage for 50 Hz 45% of supply voltage for 50 Hz Cut off / Min. speed 35% of supply voltage for 60 Hz *) NOTE: can also be used for 4A rated fans provided the ambient temperature does not exceed 40 C / 04 F. Please contact regarding the maximum ambient temperature limits at ratings between 3A and 4A Input voltage 0 V DC Output 0 to 0 V DC Rated current ma Enclosure IP65 Max. working pressure 47 bar / 68 psi Ambient temperature C / -4 3 F Fluid temperature C / F UNF female flare with depressor pin Ordering Mode SI Units Code ) -2C R22, R34a, Cut-off Female 06H344-4C Cut-off Female 06H340-4CB Cut-off male 06H342-6C R40A*) Cut-off Female 06H360-6CB R40A*) Cut-off male 06H362-4M R22, R34a, Min. speed Female 06H3240-4MB Min. speed male 06H3242-6M R40A*) Min. speed Female 06H3260 ) Code s available in Multipack. Please contact for code s available in Industrial pack. Mode US Units Code ) -2C R22, R34a, Cut-off Female 06H344-4C Cut-off Female 06H340-4CB Cut-off male 06H342-6C R40A*) Cut-off Female 06H360-6CB R40A*) Cut-off male 06H362-4M R22, R34a, Min. speed Female 06H3240-4MB Min. speed male 06H3242-6M R40A*) Min. speed Female 06H3260 ) Code s available in Multipack. Please contact for code s available in Industrial pack. DCS (az) DKRCC.PD.LC0.A2.02 3

4 Data sheet Fan speed controller Ordering -2S-E R22, R34a, SI Units Code ) Female 06H3245-4S-E Female 06H3246-6S-E R40A*) Female 06H3247 ) Code s available in Multipack. Please contact for code s available in Industrial pack. R22, R34a, -2S-E US Units Code ) Female 06H3245-4S-E Female 06H3246-6S-E R40A*) Female 06H3247 ) Code s available in Multipack. Please contact for code s available in Industrial pack. 6H E ective voltage (V%) Min. speed Cut o Min. Prop. Max. / Min. set point Max. set point (bar / psi) DCS (az) DKRCC.PD.LC0.A2.02 4

5 Setting The easily accessible adjusting screw is situated on the top surface of. The direction to turn the screw for decrease or increase in the pressure is indicated by arrow markings next to the adjusting screw. Series 360 = turn approx. 0.8bar /.6 psi approx..5 bar / 22 psi approx. 2.5 bar / 36 psi Series 360 = turn -2SE -4SE -6SE approx. 0.8bar /.6 psi approx..5 bar / 22 psi approx. 2.5 bar / 36 psi Every turn of the adjusting screw corresponds to a specified change in the value. A punch hole on the adjusting screw helps keep track of the of turns made. Installation The is designed to be directly mounted onto the refrigeration line making the most of free space in a unit. In cases where space is even more limited, can be fixed onto a simple bracket (supplied as an accessory) and screwed to a panel. Code 06H302 -AE0 Panel mounting bracket Direct mount Panel mount Wiring and electrical Electrical of to the fan motor is simple and easy. With the use of a square quick connect plug, the is possible in 4 different directions, allowing many different machine configurations to accommodate, depending on the position of the fan motor and orientation needed for the electrical cable. For wiring, a simple diagram is embossed onto the surface and also indicated on the plug. Dimensions and weight ø66 mm / 2.59 in. Horizontal space: diameter of 66 mm / 2.59 in. Height: 90 mm / 3.54 in. (2 mm / 4.4 in. with plug fitted) Weight: 80 g / 6.35 oz 2 mm / 4.4 in. DCS (az) DKRCC.PD.LC0.A2.02 5