Common Venting For Rheem Commercial Tankless Natural Gas Water Heaters

Transcription

1 Water Commercial Gas Common Venting Tankless Water Heaters Common Venting For Rheem Commercial Tankless Natural Gas Water Heaters Overview Rheem offers a manufacturer tested and UL/ULC listed common venting system providing longer lengths and fewer wall penetrations than single-unit venting. The system is polypropylene stabilized (PPs) material and Intertek certified for UL - and ULC-S and manufactured by CentroTherm EcoSystems in the USA. Venting pieces are self-locking and sealing and can be pushed together without the use of cement or glue. The common vent system is CSA certified (ANI Z.0., Gas Water Heaters Standards) for use with up to 0 units of the following Rheem high efficiency, natural gas tankless water heaters; RTGH-C9DVLN and RTGH-CM9DVLN. All common venting configurations tested to,00 ft. Common Vent System Characteristics PROPERTY: STANDARD: RESULTS: Materials & Construction Low Temperature Handling UL- Pass at - F (-0 C) U.V. Stability ASTM G- Pass Water Absorption UL-.% Common Vent Diameter CE EN- " (0mm) " (00mm) 0" (0mm) 0" (0mm) " (00mm) CE EN- Min. Thickness:.0" (.mm) Max. Thickness:.99" (.0mm) Thickness " (0mm) CE EN- Min. Thickness:.0" (.mm) Max. Thickness:." (.mm) Deflection Temperature Under Load ASTM D- 0 F (0 C) Flammability UL-9 V-0 Performance Max. Flue Gas Temperature UL- & ULC-S CE EN- 0 F (0 C) F (0 C) Clearance to Combustibles UL- & ULC-S 0" (0mm) at 0 F (0 C) Leakage UL- Pass Pressure UL-. kpa Pull UL- & ULC-S Min. 0 lb. force (.kn) Flame Spread & Smoke UL-, ULC-S0 & ASTM E- </<0 w/ces recommended wrap Fire Rating UL-9, ULC-S & ASTM E- hr Fire Rating w/ces recommended passive fire protection system Maximum Vent Length (air intake and exhaust) each: OF WATER HEATERS " COMMON " COMMON 0" COMMON 0' ( m) 00' (0 m) 00' (0 m) 0' ( m) 00' (0 m) 00' (0 m) 0' ( m) 00' (0 m) 00' (0 m) N/A 00' (0 m) 00' (0 m) N/A ' ( m) 00' (0 m) N/A ' ( m) 00' (0 m) N/A ' ( m) 00' (0 m) 9 N/A N/A 00' (0 m) 0 N/A N/A ' ( m) Equivalent Vent Length: " COMMON " COMMON 0" COMMON Degree Elbow.0' (. m).0' (. m).0' (. m) Degree Elbow.0' (. m).' (0. m).' (0. m) NOTES: Tee Termination has same equivalent vent length as Degree Elbow. The system may be vented horizontally through a wall or vertically through the roof. Header kits have already been counted and do not need to be added. Systems with 9-0 heaters can be vented in-line only. INTEGRATED HOME COMFORT PRINTED IN U.S.A. 0/ WP FORM NO. TK-0RH Rev.

2 BACK TO BACK COMMON ING The following back to back header vent kits can be purchased separately to create Back to Back Common Venting system: Back to Back venting requires additional gas chip, sold separately. Consult Rheem Applications Engineer before purchase. Direct Vent Header Kits - ( cm cm) Min (9cm) Max 0 (.m) Room Air Intake Header Kits - ( cm cm) Max. vent length distance (header kits not counted towards max vent length) 0. ( cm) Degree upward Diagrams illustrate horizontal intake and exhaust, vertical intake and exhaust also available, but not pictured. Max. vent length distance (header kits not counted towards max vent length) 0. ( cm) Degree upward PART SP09A PART SP09A SP09B " SP09C SP09A SP09B SP09C SP09D " SP09E SP09F SP09G SP09A SP09B " SP09C SP09A SP09B SP09C SP09D " SP09E SP09F SP09G SP09A SP09B SP09C SP09D 0" SP09E SP09F SP09G SP09B SP09C SP09D 0" SP09E SP09F SP09G These kits contain only minimum required vent parts to create a common venting trunk line and a connection from the trunk line to water heaters. Vent parts included in these kits DO NOT count for equivalent vent length except a degree elbow for the air intake included in a room air kit. Additional vent parts will be required to complete the common venting system. Refer to Parts List of this installation instructions for additional information.

3 SCALE.000 INLINE COMMON ING The following inline header vent kits can be purchased separately to create Inline Common Venting system: Direct Vent Header Kits - ( cm cm) Min (9cm) Max 0 (.m) Max. vent length distance (header kits not counted towards max vent length) 0. ( cm) Degree upward Diagrams illustrate horizontal intake and exhaust, vertical intake and exhaust also available, but not pictured. PART SP090A SP090B " SP090C SP090A SP090B SP090C SP090D " SP090E SP090F SP090G SP090A SP090B SP090C SP090D SP090E 0" SP090F SP090G SP090H 9 SP090J 0 Room Air Intake Header Kits - ( cm cm) Max. vent length distance (header kits not counted towards max vent length) 0. ( cm) Degree upward These kits contain only minimum required vent parts to create a common venting trunk line and a connection from the trunk line to water heaters. Vent parts included in these kits DO NOT count for equivalent vent length except a degree elbow for the air intake included in a room air kit. Additional vent parts will be required to complete the common venting system. Refer to Parts List of this installation instructions for additional information. PART SP090A SP090B " SP090C SP0909A SP0909B SP0909C SP0909D " SP0909E SP0909F SP0909G SP09A SP09B SP09C SP09D SP09E 0" SP09F SP09G SP09H 9 SP09J 0

4 INLINE COMMON ING Inline Common Vent Kit Components Exhaust Parts & in Direct Vent Header Kits only for and for 0 for and for 0 Air Intake, 0 Included in Direct Vent Kits Only Included in 0 Direct Vent Kit Only, 0 Included in Direct Vent Kits Only Included in 0 Direct Vent Kit Only Included in Room Air Kits Only Included in Room Air Kits Only PART PART DESCRIPTION SP09A " PVC to PP Adaptor SP09J ", Elbow SP09AD SP09L SP09AH SP09K SP09AK " Air Intake Branch Tee " Air Intake Branch Tee " Tee Cap " Tee Cap 0" Tee Cap SP09D Non-Return Valve (NRV) " Straight Pipe, ' SP09G (Direct Vent) " Straight Pipe, ' SP09Z (Room Air) NOTE: All header kit parts available individually for replacement order using part numbers above. NOTE: For " and " trunk diameters, exhaust branches are ", intake branches are " diameter, for 0" diameter trunk, both exhaust and intake branches are " diameter. PART SP09AC SP09E SP09AE SP09AG SP09F SP09AJ PART DESCRIPTION " Exhaust Branch Tee " Exhaust Branch Tee 0" Exhaust and Air Intake Branch Tee " Horizontal Drain Fitting " Horizontal Drain Fitting 0" Horizontal Drain Fitting 9 SP09C Universal Ball Valve Siphon 0 SP09B ", Degree Elbow SP09Y " Connector Ring SP09AL " to " Increaser SP09AB " Bird Screen SP09X " Connector Ring SP09H Centrocerin Lubricant

5 BACK TO BACK COMMON ING Back to Back Common Vent Kit Components PART PART DESCRIPTION SP09A " PVC to PP Adaptor SP09AH " Tee Cap SP09K " Tee Cap SP09AK SP09D 0" Tee Cap Non-Return Valve (NRV) SP09G " Straight Pipe, ' Exhaust SP09AG SP09F " Horizontal Drain Fitting " Horizontal Drain Fitting SP09AJ SP09C 0" Horizontal Drain Fitting Universal Ball Valve Siphon SP09Y " Connector Ring SP09AM SP09AP " Back to Back Exhaust Branch Tee " Back to Back Exhaust Branch Tee SP09AS 0" Back to Back Exhaust Branch Tee 9 9 SP09AN SP09AR " Back to Back Air Intake Branch Tee " Back to Back Air Intake Branch Tee Air Intake SP09AT 0" Back to Back Air Intake Branch Tee 0 SP09AU " Tee Cap 0 Parts, 9 & 0 in Direct Vent Header Kits only SP09AV " Tee Cap SP09BC ", Degree Elbow SP09BD ", Degree Elbow SP09AB " Bird Screen SP09X " Connector Ring SP09H Centrocerin Lubricant NOTE: All header kit parts available individually for replacement order using part numbers above. NOTE: Exhaust branches are ", intake branches are " diameter.

6 Water Commercial Gas Common Venting Tankless Water Heaters For Rheem Commercial Tankless Natural Gas Water Heaters Vent Run Accessories 9 0 IMAGE PART DESCRIPTION " " 0" Air Intake Branch Tee SP09AD SP09L SP09AE Degree Elbow SP09BE SP09M SP09BM Degree Elbow SP09BF SP09N SP09BN Straight Pipe, ' SP09BG SP09P SP09BP Straight Pipe, ' SP09BH SP09R SP09BR Straight Pipe, ' SP09BJ SP09S SP09BS Straight Pipe, ' SP09BK SP09T SP09BT 90 Degree Elbow Vertical Support SP09BL SP09U SP09BU 9 Bird Screen SS SP09AY SP09V SP09AZ 0 Tee Termination SP09BA SP09W SP09BB Support Clamp SP09AW SP09AA SP09AX Centrocerin Lubricant SP09H SP09H SP09H CENTROTHERM PPS PVC CPVC Chemical Resistance Aromatic Hydrocarbons ü X X Sulfuric Acid ü X X Hydrochloric Acid ü X X UL Listed (0 F to 0 F) Listed Not Listed Not Listed Actual Working Temperature F (0 C ) F (0 C) 0 F ( C ) 9 F ( C) 0 F ( C ) 9 F (90 C) Softening Temperatures 0 F (0 C) F (0 C) 00 F (9 C) Environmentally Friendly Production ü X X No Chloride Leaching ü X X Fully Recyclable ü X X NOTE: Temperature values in table represent exhaust flue temperatures. For approximate max. water set point temperatures, subtract 0 degrees F. Specifications The Common Vent System shall be manufactured from polypropylene stabilized (PPs). The Common Vent System shall be UL- & ULC-S rated for use with maximum flue gas temperatures of 0 F (0 C), and be rated to a maximum vent pressure of 0" of water column. Multiple Unit Controls RTGH-CM9DVLN includes manifold control, and does not require other multiple unit controls. RTGH-C9DVLN requires one of the following optional Multiple Unit controls to manifold two or more water heaters together. Without the Multiple Unit Control, water heaters operate independently MULTIPLE UNIT CONTROLS RTGH-C9DVLN RTGH-CM9DVLN MAXIMUM NO. OF WATER HEATERS EZ Link Optional Not Required MIC- Optional Not Required MIC- Optional Not Required MIC- with MICS-0 Optional Not Required 0* Manifold Control N/A Included 0* *Maximum number of water heaters per one common vent system is 0, depending on trunk diameter In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Water Heating Northmeadow Parkway, Suite 00 Roswell, Georgia 00 Rheem Canada Ltd./Ltée Edgeware Road, Unit Brampton, Ontario LY 0P INTEGRATED HOME COMFORT PRINTED IN U.S.A. 0/ WP FORM NO. TK-0RH Rev.