PROCESSING LINES FOR HOT-DIP GALVANIZING
|
|
- Ada Sanders
- 5 years ago
- Views:
Transcription
1 PROCESSING LINES FOR HOT-DIP GALVANIZING
2 Konsorcjum REMIX offers comprehensive service of HDG plants concerning consultation, design and manufacture of equipment contained in hot-dip galvanizing process lines. We offer complete HDG lines based on electrical heated or gas-fired furnaces with steel kettles or ceramic baths for both low temperature and high temperature hot-dip galvanizing. Being experts of longstanding experience, we provide comprehensive solutions suited to individual requirements of our Customers. With the help of our expertise we can provide professional support in design of complete processing lines for hot-dip galvanizing. Our offer comprises: A local inspection at the Customer's facility. Consultations concerning selection of technology and equipment for a HDG plant under construction. Design of complete HDG processing lines. Manufacturing and assembly of equipment incorporated in a given HDG processing line: Hoists for charge moulding and demoulding of charges and stockpoints. Transport systems for HDG plant (rope overhead cranes, rope hoits, industrial truck cars) Complete lines for surface preparation before galvanizing (system of processing tanks with ventilation, utility installations, storage containers, flux regeneration units, waste neutralization systems Electrical heated and gas-fired chamber driers using the heat of exhaust gases leaving the galvanizing furnace HDG furnaces with steel kettles and ceramic baths Steel galvanizing kettles Water tanks Slotted and cabin vapour extraction systems Exhaust gas extracting and pollutants filtering systems Transport, unloading and positioning Service, overhauls and modernization of HDG plants Control, monitoring and process visualization systems for HDG plant Spare parts Draft of a HDG processing line 1. Charge moulding area 2. Charge degreasing tank 3. Rinsing tank 4. Charge etching tank 5. Rinsing tank 6. Etching-out tank 7. Fluxing tank 8. Charge dryer 9. Galvanizing furnace 10. Water tank 11. Charge demoulding area
3 Surface preparation Chemical surface processing lines An etching line (preliminary processing before hot-dip galvanizing) is a key segment of every HDG plant and has a major impact on the operation of the entire galvanizing plant. As experts of longstanding experience, we offer comprehensive solutions to our Customers. For new investments in the area of surface preparation prior to galvanizing we provide: Manufacture and assembly of etching tanks A system of storage tanks for new and used chemicals Transport system for chemicals within the plant Ventilation system with absorption of acid fumes Neutralization of liquid waste and used acids Assembly, start-up, training Etching tank 3D
4 Surface preparation Our etching tanks feature exceptional durability and solidity of construction. Each tank is designed in accordance with PN-EN standards and DVS 2205 parts 1 5 guidelines. Apart from that we can provide testing strength calculations with MES method. A process tank consists of a steel supporting structure (protected with chemo-resistant coating) which holds supports for handling traverses. Etching tanks may be equipped with movable covers, which significantly decreases evaporation of acids. The following can be used to heat up the baths: electric heaters, plastic immersion heaters or external heat exchangers. Air cleaning systems, flux regeneration units and liquid waste neutralization systems In order to be considerate of the environment and to comply with environmental standards, the users of HDG plants are committed to clean the air of noxious substances and provide flux regeneration units as well as liquid waste neutralization systems. Manufactured by IMFITEX absorbers and droplet eliminators, together with ventilators and other elements of the system provide a reliable and efficient air cleaning system to be used at the stage of chemical surface preparation before galvanizing.
5 Dryers Chamber dryers are designed to dry up and heat the charge up to the temperature of 120 C (measured inside the chamber) prior to galvanizing process. To suit our Customer's needs we provide dryers with either electric or gas heating systems. Charges inside a dryer are heated with air which uses the thermal energy from the exhausts leaving the HDG furnace. An additional gas burner may be provided to support the heat exchanger to heat up the drying air. Charge transport inside a dryer may be effected in one of the following ways: Push-through system Chain-driven mobile system Truck system. Photo acknowledgments: MEPROZET, JAMALEX, LEGIPOL, POLIMEX Furnaces with ceramic baths Galvanizing furnaces with ceramic baths are designed for high temperature HDG processes run at the temperature up to 600 C. Most often they are used for galvanizing of small elements. Bath volume up to 100 ton Bath capacity (for galvanizing) up to 4 ton/h Heating system electric or gas
6 Furnaces with steel kettles Galvanizing furnaces with steel kettles are designed for low temperature HDG processes run at the temperature up to 450 C. Most often they are used for galvanizing of large elements. Modular thermal insulation of furnace walls is made of top quality fibrous ceramic materials. Appropriately selected thickness of insulation layer and the type and quality of materials applied in its construction ensure low idle power of the furnace and external temperature of its casing walls not exceeding the ambient temperature by more than 40 C. Depending on the individual needs of our Customer, we can provide furnaces with either electric or gas heating systems, suitable for high temperature operations in industrial conditions. The heating systems ensures such a temperature gradient that prevents rising of hard zinc from the bottom of the galvanizing kettle. Bath volume up to 450 ton Bath capacity (for galvanizing) up to 15 ton/h Heating system electric or gas Exhaust extraction system slot or chamber Photo acknowledgments: MEPROZET, JAMALEX, LEGIPOL, POLIMEX
7 Filtering systems Exhaust extraction and filtering systems In order to be considerate of the environment and to comply with environmental standards, the users of HDG plants are committed to clean the exhausts and waste released in the course of galvanizing. Our exhaust extraction and waste filtering systems are provided by Nederman Polska. Our quotation on exhaust extraction and filtering systems comprises the following: industrial dust extractors industrial fans screw conveyors collection and transport units for filtered waste pipes and pipelines, filtering bags service of dust extraction systems.
8 Additional products for hdg plants Electric screw elevators to operate at charged moulding and demoulding areas. Charged stockpoints (waiting areas). Process transport including: rope cranes, electric rope hoists and rail platforms to carry galvanized workpieces. Cooling and galvanizing baths Tooling (traverses, zinc pumps, hard zinc scoops, etc.) Spare parts Control, monitoring and process visualization systems for HDG plant Stacks (emittors) Spinning machines Cabins and suction for galvanizing fumes All equipment is manufactured in compliance with basic requirements of applicable EU directives and has the CE compliance
For the last 12 years we have been producing Hot Dip Zinc Pretreatment Lines including; -Pre-treatment Lines -Enclosures -Exhausting Systems & Scrubbe
Istanbul / Turkey For the last 12 years we have been producing Hot Dip Zinc Pretreatment Lines including; -Pre-treatment Lines -Enclosures -Exhausting Systems & Scrubbers -Dry Unit -Storage Tanks -Pumping
More informationRemoving the moisture contents of coal using solar drying
Case Study 2 Removing the moisture contents of coal using solar drying Implementing the technology A wall and floor tiles industry uses spray dryers for the formation of granules. The hot gases to the
More informationPRODUCTION SEQUENCES OF PAINT SHOP
SPRAY PAINTING PLANT A chemically resistant, mechanically durable, pleasant in appearance and finish painting is sought for by all quality seekers. Design constraints of product, customer preferences,
More informationWESTECH. Custom-Designed Equipment WESTECH. for the Galvanizing Industry. Click to return to table of contents or to move on to the next page
4404 South Maybelle Avenue Tulsa, Oklahoma 74107 Ph. (918) 712-2406 Fax (918) 712-9850 (Europe) Ltd. Unit 1 No. 38 Thornleigh Trading Estate Blowers Green Road Dudley DY2 8 UB United Kingdom DY14NP England
More informationBlast system for PCB-restoration
Global engineering Trusted solutions Blast system for PCB-restoration Highly proved safety Low maintenance full-system Easy handling Engineered by Clemco Anti PCB-System Efficient construction for safe
More informationEnviro International Corporation. WET SCRUBBER
.. Enviro International Corporation. WET SCRUBBER Enviro International Corporation The packed bed scrubbing equipment includes countercurrent, vertical flow packed beds, and Crossflow horizontal scrubbers.
More informationFS flat bag dust collector
Suitable for larger industrial plants with hot gas applications The functional unit of a FS flat bag dust collector comprises of the hood for dust-laden gas, the filter casing, the dust collection hopper
More informationGeneration 3000 Ironers
Generation 3000 Ironers Save time, energy an ironer designe 2 and labor with d just for you Generation 3000 ironers are designed to meet the specific ironing needs of your laundry operation. Our range
More informationBackground. Totech dry cabinet
Background Moisture and Surface Mount Components do not mix Plastic packaging material very often is permeable to moisture If moisture levels become critical, component damage may occur when heated during
More informationvapic was the first company in the industry to use screw vacuum pumps. We have gained extensive
Konsequent sauber Dry running vacuum pumps are the heart of the patented vapic energy cycle. The compression and condensation energy used is not wasted but intelligently circulated and reused in the process.
More informationCHP-turbine room. CHP can capture almost EXTRACTED STEAM 20 PSI HIGH-PRESSURE STEAM 1250 PSI HEAT EXCHANGER HOT WATER SUPPLY F
5 6 HIGH-PRESSURE STEAM is routed from the wood-chp boiler to the turbine. TURBINE BLADES spin at nearly 00 revolutions per second. Steam acting on the turbine blades creates mechanical energy in the TURBINE.
More informationComplex Solutions For Grain Storage & Нandling
Complex Solutions For Grain Storage & Нandling CONTENTS About Us Complex Solutions 4 6 Our Products: Grain Bins Grain Dryers Conveying Equipment Grain Cleaners Auxiliary Equipment Our Services Our Projects
More information...just the right thing for everyone - individually adapted
...just the right thing for everyone - individually adapted Hellmich has been developing clever solutions for dedusting and flue gas cleaning, for pipelines and apparatus engineering for over 45 years.
More informationCLEACOM Engineered System Solutions. Established 24/7 technology for the separation of dust and fume during compounding processes
CLEACOM Engineered System Solutions Established 24/7 technology for the separation of dust and fume during compounding processes Reduced consumption of resources with dry separation. Wet separation with
More informationEN l Senking Batch Transfer Drying Tumbler DT Senking Batch Transfer Drying Tumbler DT High performance with less energy
EN l Senking Batch Transfer Drying Tumbler DT 60 240 Senking Batch Transfer Drying Tumbler DT 60 240 High performance with less energy Single dryer with loading belt. directly side by side. The dryers
More informationDrying of textiles. Sustainability in commercial laundering processes. Leonardo da Vinci Project. Module 2 Machine technology.
Leonardo da Vinci Project Sustainability in commercial laundering processes Module 2 Machine technology Chapter 5 Drying of textiles Module 2 Machine technology Chapter 5 Drying 1 Content Types of evaporators
More informationSPECIALIST BLASTING SYSTEMS, PAINT SPRAYING SYSTEMS AND CONVEYOR TECHNIQUE. Smart Surface Solutions. Blasting systems. Paint spraying systems
Smart Surface Solutions BLASTING PAINTING CONVEYING SPECIALIST BLASTING SYSTEMS, PAINT SPRAYING SYSTEMS AND CONVEYOR TECHNIQUE Blasting systems Paint spraying systems Conveyor technique Corrosion protection
More informationASPHALT PLANT. atlastechnologiesindia.com
ASPHALT PLANT MOBILE PLANT VARIANT: MDM 25 (20-30 tph) atlastechnologiesindia.com AGGREGATE FEEDING CONVEYOR AGGREGATE FEEDER In our mobile asphalt drum mix plant all the four bins are fitted with individual
More informationSERVICES MORE THAN 80 YEARS CONTRIBUTING TO OUR CUSTOMERS GROWTH.
CLEANING MACHINES SERVICES MORE THAN 80 YEARS CONTRIBUTING TO OUR CUSTOMERS GROWTH. KW Support Our multiservice support system aims at fulfilling our customers every after sale need in Brazil or abroad.
More informationGüntner Info. finoox technology. fin and tube heat exchangers. Tailor-made solutions!
Güntner Info finoox technology fin and tube heat exchangers Tailor-made solutions! Heat exchangers Knowledge-based engineering Special Air Conditioning and Refrigeration applications and the cooling of
More informationFor inspection purposes only.
Attachment F.1 Neutralisation System Process Description The CPG process generates both acid and caustic waste water from the acid/base leaching processes. This waste water will be collected in dedicated
More informationAugust 2016 Volume 23, Number 8. Specifiying WOOD DRYING OVENS. By Mike Grande, Wisconsin Oven. Follow us on:
August 2016 Volume 23, Number 8 Specifiying WOOD DRYING OVENS By Mike Grande, Wisconsin Oven Follow us on: Ovens Specifying WOOD DRYING OVENS Coating and drying the finishes on wood and cement-board siding,
More informationSELECTION GUIDE. Industrial Thermoregulation. Products for panels and enclosures
SELECTION GUIDE Industrial Thermoregulation Products for panels and enclosures 7T Series - Thermo-Hygrostat and Thermostats 7F Series - Filter Fans 7H Series - Panel Heaters Perfect climate inside panels
More informationGRAIN STORAGE TURNKEY CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE
GB GRAIN STORAGE TURNKEY CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE GRAIN STORAGE OPTIMUM GRAIN STORAGE FOR BETTER UTILIZATION OF NATURE S RESOURCES Cimbria is one of the
More informationPLASTER PLASTERBOARD GYPSUM BLOCKS. Gypsum Solutions
PLASTER PLASTERBOARD GYPSUM BLOCKS Gypsum Solutions 2 High tech solutions have a name Grenzebach Grenzebach stands for intelligent handling, processing and automation technology focused on quality & performance.
More informationSurface Preparation For Coatings
Since 1995 Blast Equipment Surface Preparation For Coatings Abrasive Blast Rooms Screw Conveyor And Bucket Elevator Multiple Recovery Floor Designs Rubberized Wall/Power Roll Up Doors Complete Blast Room
More informationTECCON. 2,5 to 10,0 t / H Water evaporation RATE
TECCON BELT DRYER 2,5 to 10,0 t / H Water evaporation RATE Installation of belt dryer 2 TECCON belt dryer Belt dryer 2,5 to 10,0 t / H Water evaporation RATE 1 Zentrales Element im Pelletswerk Norica ist
More informationANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 1 GENERAL
Annex 2, page 2 ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 1 GENERAL Section 1 Application 1 The following new sentence is added to the end of paragraph 1.2:
More informationDRAFT. Electroplating Tip Sheet Drag-Out Reduction. Background
Electroplating Tip Sheet Drag-Out Reduction Electroplating Tip Sheet Series 1. Good Operating Practices 2. Drag-Out Reduction 3. Rinse Water Reduction 4. Recovery and Recycling of Bath Chemicals Background
More informationHeated tools. Semiconductor equipment
Heated tools Semiconductor equipment Ceramic heating elements made of silicon nitride and aluminum nitride can be manufactured as tools in various shapes. The heating function can be integrated in complex
More informationGeneral Industry Safety and Health Checklist Guidelines. Building and Premises. Loss Control Bulletin
The purpose of a monthly self-inspection program is to identify unsafe conditions in the work environment and unsafe employee actions. Management can then correct these safety hazards, reducing the potential
More informationautomatic FiReFighTing SYSTeMS in PainT booths
SPECIAL HAZARDS PROTECTION automatic FiReFighTing SYSTeMS in PainT booths hazard type The risks considered, according to existing regulations, are Class A risk: solids fire. Class B risk: fire of flammable
More informationAXIAL FAN User s manual. Quiet-dMEV 100 DC.
AXIAL FAN User s manual Quiet-dMEV 100 DC www.ventilation-system.com CONTENTS Delivery set... 6 Brief description... 6 Operating guidelines... 6 Designation key... 7 Installation and set-up... 7 Fan options...
More informationAUTOMATIC FIREFIGHTING SYSTEMS IN PAINT BOOTHS
SPECIAL HAZARDS PROTECTION AUTOMATIC FIREFIGHTING SYSTEMS IN PAINT BOOTHS Hazard type The risks considered, according to existing regulations, are Class A risk: solids fire. Class B risk: fire of flammable
More informationPowerDry. High Capacity Dryers P A R T N E R I N L A U N D R Y T E C H N O L O G Y
PowerDry High Capacity Dryers P A R T N E R I N L A U N D R Y T E C H N O L O G Y High Capacity Dryers: PowerDry Universal application Heating unit A universal dryer, which can be used for pre drying,
More informationHeating, Air Conditioning, Ventilation. Отопление-Кондиционеры-Вентиляция. MTM 8-30 kw UNIVERSAL OIL HEATER OPERATING MANUAL
Heating, Air Conditioning, Ventilation Отопление-Кондиционеры-Вентиляция MTM 8-30 kw UNIVERSAL OIL HEATER OPERATING MANUAL 1. Usage MTM 8-30 universal oil heater is designed for heating commercial rooms
More informationAll Cleaning Options for Parts Cleaning
All Cleaning Options for Parts Cleaning Rick Perkins Chemical Engineer / President Chem Logic Austin, Texas www.chemlogic.us 512-426-5728 rperkins@chemlogic.us Our Experience 10 years in M&P working on
More informationASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 ( tph)
ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DM 45 (40-60 tph), DM 50 (60-90 tph), DM 60 (90-120 tph) MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 (90-120 tph)
More informationProposed standards for Chinese national adoption
Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
More informationH O B A R T F T F L I G H T - T Y P E W A R E W A S H E R. Energy efficient. Water efficient. Cleaning efficient. So you re efficient.
H O B A R T F T 9 0 0 F L I G H T - T Y P E W A R E W A S H E R Energy efficient. Water efficient. Cleaning efficient. So you re efficient. 2 H O B A R T F T 9 0 0 F L I G H T - T Y P E W A R E W A S H
More informationFilters & Centrifugal Separators
www.kaeser.com s & Centrifugal Separators Flow rates 0.8 to 8 m³/min Why use compressed air filters? On average, a compressor sucks in up to 90 million particles of dirt, hydrocarbons, viruses and bacteria
More informationAnhydro Spin Flash Drying
Anhydro Spin Flash Drying SPX FLOW Danmark A/S is an international engineering company with a consistent goal to provide our customers with the optimal processing technology and the highest plant performance
More informationkl-direkt WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes Special edition: Wind Power
kl-direkt Special edition: Wind Power WIND POWER Towers Wet paint overspray Large components Zinc spraying processes Power head Fabrication processes Keller Information Keller Lufttechnik is a worldwide
More informationTetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer
Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Here shown with Tetra Pak Volumetric Bottom Filler Highlights Increased efficiency with servo controlled mould table index, extractor functions
More informationSOUND-INSULATED FAN. Iso-K OPERATION MANUAL. Iso-K_v.1(2)-EN.indd :20:59
SOUND-INSULATED FAN OPERATION MANUAL _v.1(2)-en.indd 1 10.08.2015 15:20:59 CONTENT Introduction 3 General 3 Safety rules 3 Transport and storage requirements 3 Manufacturer's warranty 3 Fan design 4 Delivery
More informationINDIVIDUAL DRIVE, CHAIN DRIVE AND U- SEAL MECHANISM IN ROLLER HEARTH NORMALISING FURNACE
INDIVIDUAL DRIVE, CHAIN DRIVE AND U- SEAL MECHANISM IN ROLLER HEARTH NORMALISING FURNACE Akash Kumar Mechanical Engineering Dronacharya College of Engg. Gurgaon, Haryana Abstract:- This project deals with
More informationTetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer
Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Here shown with Tetra Pak Volumetric Bottom Filler Highlights Operating principle Increased efficiency with servo controlled mould table index,
More information+91-8048077425 Green Planet Technologies http://www.gpt-india.com/ We are engaged in designing, manufacturing & exporting Dust Collectors, Paint Booths, Fume Exhaust Systems, Fume Scrubbers, Air cooling
More informationAnhydro Spin Flash Drying
Anhydro Spin Flash Drying SPX FLOW Danmark A/S is an international engineering company with a consistent goal to provide our customers with the optimal processing technology and the highest plant performance
More informationINDUSTRIAL LAUNDRY EQUIPMENT FOR VENDED LAUNDRY APPLICATIONS WASHER-EXTRACTORS I TUMBLE DRYERS SMALL CHASSIS EQUIPMENT
INDUSTRIAL LAUNDRY EQUIPMENT FOR VENDED LAUNDRY APPLICATIONS WASHER-EXTRACTORS I TUMBLE DRYERS SMALL CHASSIS EQUIPMENT IPSO : Built for Commercial Dependability IPSO has been the driving force behind some
More informationEquipment guide for local exhaust ventilation (LEV)
Nederman equipment guide brochure LEV_Layout 1 29/09/2014 13:43 Page 1 Equipment guide for local exhaust ventilation (LEV) Extraction products, systems and solutions available Nederman is one of the world'
More informationMODULAR & T-SERIES DRYERS
TOWER DRYERS MODULAR & T-SERIES DRYERS PROVEN & DEPENDABLE WWW.GRAINSYSTEMS.COM PROVEN & DEPENDABLE The demands of farming are never-ending. The risks are high. And, at harvest, every second counts. The
More informationKMI Pulp Moulding Systems Egg Flats
KMI Pulp Moulding Systems Egg Flats These 54 moulders are designed for egg flats, egg cartons and other low profile products. System #2CE: 1,440 flats per hour, 12,182,400 per year System #6CE: 2,160 flats
More information1 of 9. PLE Laundry Equipment Sdn. Bhd. Union NOVA Machines. Union HLM 800
PLE Laundry Equipment Sdn. Bhd. Union NOVA Machines The Union NOVA machines combine two independent dry-cleaning systems - the first for cleaning dark garments; the second for light coloured and white
More informationAdsorption Chillers Energysmart Green Cooling
Adsorption Chillers Energysmart Green Cooling New Partners in innovation Leaders in Dehumidification... Worldwide Power Partner Inc USA www.bryair.com Recover Low Grade Process Waste Heat For Energy Smart
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationDESICCANT AIR DRYERS. BD + CD + CD series
DESICCANT AIR DRYERS BD + CD + CD series AIR TREATMENT, A CRUCIAL INVESTMENT WHY YOU NEED QUALITY AIR Compressed air contains oil, solid particles and water vapors. Together, they form an abrasive, often
More information3gb53231b.fm5 Page 12 Friday, April 11, :21 PM
3gb53231b.fm5 Page 12 Friday, April 11, 2003 12:21 PM INSTRUCTIONS FOR USE BEFORE USING THE COOKTOP SUGGESTIONS FOR ENVIRONMENT PROTECTION PRECAUTIONS AND GENERAL ADVICE ENERGY SAVING TIPS CARE AND MAINTENANCE
More informationTechnical press. Quick freezing. Gently freezing with cryogenic gases
Technical press Gently freezing with cryogenic gases Quick freezing The main consideration for deep-freezing is the rate at which the temperature of the food is reduced, whether it is meat, vegetables
More informationThe equipment for storage and transportation of grain
The equipment for storage and transportation of grain About Company Grain House Сompany is a manufacturer of grain bins and wide range of material handling equipment in Ukraine. Grain House main partner
More informationINDUSTRIAL CLEANING SYSTEMS & LOGISTICS OFFERING SMART CLEANING SOLUTIONS FOR EVERY CHALLENGE
INDUSTRIAL CLEANING SYSTEMS & LOGISTICS OFFERING SMART CLEANING SOLUTIONS FOR EVERY CHALLENGE Unifortes From ancient Latin, translated Together Strong, Unifortes is founded by two recognized companies
More informationModernizing Wet Process Fiberboard Plants
Modernizing Wet Process Fiberboard Plants THE SIGMA GROUP...stands for Swedish engineering with experience for more than 25 years. Combined with modern material technologies, we produce high quality equipment
More informationCONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
More informationReconciliation table Equipment (Public Safety) Regulations
Reconciliation table Equipment (Public Safety) Regulations July 2016 This reconciliation table provides a comparison between the regulatory provisions current Equipment (Public Safety) Regulations 2007
More informationProcess air cooler series DV
Process air cooler series DV With cooling circuit in air or water-cooled version Customized refrigeration technology Made in Germany 2 Lahntechnik your system partner for customized refrigeration technology
More informationAIR FILTER + REGULATOR + LUBRICATOR AIR FILTER. Series : V050, V100, V200, V250, V300
AIR FILTER + REGULATOR + LUBRICATOR AIR FILTER Series : V00, V00, V00, V0, V00 AIR FILTER FEATURES: High flow Capacity Shatter- Proof polycarbonate bowl with bowl guard Minimum Pressure drop Choice of
More information#7: KMI Pulp Moulding System # KMI
#7: KMI Pulp Moulding System # KMI-540-850 Moulder #M540-850, Process #P540-850, Dryer #- D540-850, stacker and packing table, Estimated Delivery: 9 months from receipt of deposit for machine On site assembly:
More informationOFFICINE MINUTE VILLORBA - TREVISO
OFFICINE MINUTE VILLORBA - TREVISO A15 A23 A25 A22 A23 A12 A14 A10 A21 A4 A3 A21 A2 A5 A21 A7 A21 A16 A17 A18 A21 A8 A1 A13 A14 A9 A19 A11 A20 A24 A1 - Linear gas burner A2 - Air mixing area A3 - Hot air
More informationEnvironmentally safe techniques in the recycling of mercury-containing materials
Energy Production and Management in the 21st Century, Vol. 1 551 Environmentally safe techniques in the recycling of mercury-containing materials I. Maslennikova 1, V. Kovalev 2, O. Eronko 1 & T. Grishchenko
More informationJENSEN-SENKING BATCH TRANSFER DRYING TUMBLER
JENSEN-SENKING BATCH TRANSFER DRYING TUMBLER DT 60, 90, 120, 140, 190, 240 High production capacity, low energy consumption SENKING batch dryers, 60-240 kg capacity Applications For shaking, conditioning
More informationAUTOMATIC FIRE SUPPRESSION SYSTEMS
AUTOMATIC FIRE SUPPRESSION SYSTEMS Effective automatic fire suppression systems are essential for the fire protection of mechanical equipment and special technologies. CONTENTS RSBP FIRE PROTECTION OF
More informationThe plating industry
The plating industry Environmental issues by electroplating Wastewater (from rinsing processes) Waste (liquid waste, sludge) Air pollution (extraction from hot and toxic process baths) Resource consumption
More informationAir handling unit. BlauAir RH USER S MANUAL
Air handling unit EN USER S MANUAL CONTENTS Safety requirements... 2 Purpose... 4 Delivery set... 4 Designation key... 4 Technical data... 5 Unit design and operation logic... 7 Installation and set-up...
More informationSPRAY PAINTING SYSTEMS
Sumko Engg. Sys. B/6, Bush Villa Society, Road No 22, Wagle Estate, THANE - 400 604. Tel: (022) 3251 0543 Telefax: (022) 2582 5964 E-mail: @hathway.com Visit us at www.sys.com SPRAY PAINTING SYSTEMS PRE
More informationSpecialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use.
Specialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use. Thermal processing solutions Ingetecsa supplies thermal processing solutions
More informationcussons Refrigeration Assembly Range TECHNOLOGY REFRIGERATION AND AIR CONDITIONING CUSSONS TECHNOLOGY LABORATORY RECOMMENDATION
REFRIGERATION AND AIR CONDITIONING CUSSONS LABORATORY RECOMMENDATION Cussons Refrigeration laboratories are offered to provide teaching to a range of different skill levels. In all the laboratories teaching
More informationBoiler Basics. Design and operation
Boiler Basics Design and operation A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under
More informationEnergy recovery from exhaust gases using Heat Pipe technology
Energy recovery from exhaust gases using Heat Pipe technology Energy recovery from industrial flue and exhaust gases can provide large amounts of valuable energy savings, together with significant reductions
More informationInnovative Vacuum Solutions
173.15.02 Innovative Vacuum Solutions for heat-treatment furnaces Heat-Treatment: Product / Application Matrix STANDARD DUTY e.g. Tempering, Annealing, Hardening Clean furnace outgassing (Pumps need to
More informationPhoto courtesy of U.S. Navy. ARID-Dry. Restoration and Construction Drying Equipment Mobile Desiccant Dehumidifiers Temporary Humidity Control
Photo courtesy of U.S. Navy ARID-Dry Restoration and Construction Drying Equipment Mobile Desiccant Dehumidifiers Temporary Humidity Control INTRODUCING Controlled Dehumidification IMS Controlled Dehumidification
More informationCENTRIFUGAL CEILING EXTRACT FAN
CENTRIFUGAL CEILING EXTRACT FAN Ceileo 200/250/300 Ceileo 200/250/300 Т/H/IR Ceileo 200/250/300 Light Ceileo 200/250/300 Light Т/H/IR EN USER'S MANUAL CONTENTS Safety requirements... 2 Purpose... 4 Delivery
More informationCARE GUIDANCE. Local Exhaust Ventilation (LEV) Systems for High Temperature Insulation Wool (HTIW) LEVEL 2 RECOMMENDATIONS ON BEST PRACTICE
PUBLICATION: MAY 2012 REVISION: JANUARY 2018 VERSION: 1.2 CARE GUIDANCE RECOMMENDATIONS ON BEST PRACTICE LEVEL 2 Local Exhaust Ventilation (LEV) Systems for High Temperature Insulation Wool (HTIW) 2 LOCAL
More informationEco Angus Wood Pellet Boilers
Eco Angus Wood Pellet Boilers ISO 9001 ISO 14001 1 Contents 3 Our product philosophy 3 Our approach 3 Manufacturing credentials 4 Orligno 400 4 Boiler construction 5 Boiler description 5 Burner 6 Technical
More informationCENTRIFUGAL CEILING EXTRACT FAN
CENTRIFUGAL CEILING EXTRACT FAN 110 Т/H/IR 110 Light Т/H/IR 150 Т/H/IR 150 Light Т/H/IR EN USER'S MANUAL CONTENTS Contents... 2 Safety requirements... 2 Purpose... 4 Delivery Set... 4 Designation key...
More informationMULTI-STAGE COMPONENT CLEANING MACHINES
MULTI-STAGE COMPONENT CLEANING MACHINES For efficient cleaning Multi-stage cleaning machine In automated TEIJO multi-stage cleaning machines, a rotary spray system sprays hot cleaning liquid onto stationary
More informationecodry Figure 1 - Process Diagram ecodry B General Process Description
ecodry The process principal of the ecodry system is centered around the concept of drying in a closed steam loop, with a process-integrated thermal oxidation. The separation of flue gas from the drying
More informationQuality Construction Equipment
Quality Construction Equipment ASPHALT BATCH MIX PLANT ANP Series - 60 to 240 tph ASPHALT BATCH MIX PLANT Apollo has always been proactive in rising to customer demands and expectations by providing quality
More informationVISTA SERIES. Modular Conveyor Wash System. Up to 80 Cars Per Hour. Equipment and Building In One Unit
VISTA SERIES Modular Conveyor Wash System Up to 80 Cars Per Hour Equipment and Building In One Unit VISTA 40 60 CARS PER HOUR 13.5m AND UP SYSTEMS Features Hot dipped galvanized frame, double painted at
More informationPerfection for Professionals: Air Conditioner Service with Bosch ACS 751 and 651
Bosch: bringing you the workshop of the future For over 125 years, Bosch innovations have been keeping vehicles on the road and getting people to and from their destinations while improving safety and
More informationFORCED AIR CONVECTION OVENS
FORCED AIR CONVECTION OVENS SIMPLE APPLIANCES WITH A TRADITION FOR RELIABILITY. FCF OVENS New FCF Ovens: an unbeat ISO 14001 Zanussi has always served the professional catering sector with the utmost commitment
More informationthermal processing of Carbon fiber oxidation, composite curing, solution heat treating
INSPIRED INNOVATION thermal processing of ADVANCED materials Carbon fiber oxidation, composite curing, solution heat treating INSPIRED Innovation Thermal processing of materials is a critical step in manufacturing
More informationDESICCANT AIR DRYERS. BD + CD + CD series
DESICCANT AIR DRYERS BD + CD + CD series AIR TREATMENT, A CRUCIAL INVESTMENT WHY YOU NEED QUALITY AIR Compressed air contains oil, solid particles and water vapors. Together, they form an abrasive, often
More informationBiosolids Processing Report City of Buffalo, Minnesota
April 2017 Biosolids Processing Report City of Buffalo, Minnesota W13.112989 Submitted by: Bolton & Menk, Inc. 2040 Highway 12 East Willmar, MN 56201 P: 320-231-3956 F: 320-231-9710 Certification Biosolids
More informationFUME CUPBOARDS DESIGN FEATURES GENERAL ARRANGEMENT FACE VELOCITIES EXTRACTION SYSTEMS AIRFLOW CHARACTERISTICS
DESIGN FEATURES 1233 1233 mm mm 150 150 335 335 mm mm 150 150 HEIGHT HEIGHT TO TO EXTRACT EXTRACT APERTURE APERTURE FILTER FILTER 315 1000 mm SECTION 590 mm GENERAL ARRANGEMENT 150 FACE VELOCITIES 25 265
More informationThe ultimate in air handling units: directly and indirectly fired
AHU The ultimate in air handling units: directly and indirectly fired Mark has developed a range of air handling units with several options for a wide variety of applications. From a simple air intake
More informationECO-MASTER DRYER DRYING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE
GB ECO-MASTER DRYER DRYING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE THE EFFICIENT AND SUSTAINABLE DRYING SOLUTION LEADING SUPPLIER OF ADVANCED DRYING TECHNOLOGY During
More informationComplete Solution for Painting & Baking
[An ISO 9001:2008 & 14001:2004 Certified Company] Spraybooth is an investment that pays rich dividends by providing superior quality finish, increase in productivity & better working conditions. Complete
More informationSmart Smart IR. Service instruction SALES DATE MANUFACTURED ON (DATE): APPROVAL MARK SOLD. model (check applicable) is recognized as serviceable
Smart Smart IR model (check applicable) is recognized as serviceable Service instruction SALES DATE MANUFACTURED ON (DATE): SOLD APPROVAL MARK SMART-EN-04 BLAUBERG Company is happy to offer your attention
More informationASPHALT PLANT. AtlasTechnologiesIndia.com
ASPHALT PLANT Available as stationary and semi-mobile. VARIANTS: ABP 80 (80 tph), ABP 120 (120 tph), ABP 160 (160 tph) Capacities above 160 tph are tailor made. AtlasTechnologiesIndia.com AGGREGATE FEEDER
More informationTumble dryer PT 5136 PT en - GB. Installation plan
Installation plan Tumble dryer PT 5136 PT 7136 To avoid the risk of accidents or damage to the machine, it is essential to read operating and installation instructions before installation and commissioning
More information