System JABLOTRON 100. Product range. Alarm with revolutionary control

Transcription

1 System JABLOTRON 100 Product range Alarm with revolutionary control

2 ABOUT JABLOTRON We supply our customers with top-of-the-range security and communications systems. Jablotron Alarms, a.s. is a progressive company with a tradition that dates back to We are one of the leading suppliers of alarm systems. Our systems are fitted by thousands of installation partners and are used by hundreds of thousands of satisfied customers all over the world. We provide revolutionary and innovative solutions which provide better protection of the property, health and security of our customers, are easy to install, and increase the day-to-day user friendliness of our products. We place special emphasis on developing our own products and technology, using the very latest techniques and processes and collaborating with leading designers. Thanks to this, our systems regularly win the top awards at specialised international trade fairs. Our steadfast intention is to make dreams come true, dreams of mutual value and benefit. We transform good ideas into attractive products and services for our customers and partners. We provide our installation partners with a highly-developed certification training system, first-rate technical support and a premium guarantee, which is becoming a key competitive advantage. Quality management certification is a matter of course for us. We hold an ISO 9001:2009 quality management system certificate, issued for the development, manufacture and sale of electronic security systems and an ISO13485:2012 quality management certificate for the development, manufacture and sale of active nonimplantable medical devices. For cloud services we have been awarded a certificate confirming that we have an established ISO27001:2014 information security management system. We would be honoured if you chose us as your supplier or partner.

3 TABLE OF CONTENTS CONTROL PANELS AND COMMUNICATORS 4 JA-101 family 4 Comparing control panels and communicators JA-101 family 5 JA-106 family 6 Comparing control panels and communicators JA-106 family 7 BUS HARDWIRED DEVICES 8 Access modules 8 Detectors 11 BUS PIR movement detectors 11 BUS perimeter protection detectors 14 BUS environmental detectors 15 Detectors accessories 17 Sirens 19 PG output and indicator modules 19 Accessories 22 RADIO DEVICES 26 Wireless access modules 28 Wireless detectors 29 Wireless PIR movement and combined detectors 29 Wireless outdoor detectors 33 Wireless perimeter protection detectors 35 Wireless environmental detectors 38 Wireless sirens 42 Remote controls 44 Output modules 48 SOFTWARE 50

4 CONTROL PANELS AND COMMUNICATORS JA-101 family Control panel with a built-in GSM/GPRS communicator The JA-101K control panel is the basic element of the JABLOTRON 100 security system. It enables flexible system setting and the easy protection of small commercial premises, cottages, offices in a BUS design as well as medium-sized premises, family houses or companies in a wireless or combined design. The required adjustments and sizing of the system are carried out via F-Link software. JA-101K The JA-101K control panel offers: up to 50 wireless or BUS zones up to 50 user codes up to 8 sections up to 16 programmable PG outputs 20 independent schedules SMS and voice reports from the system to up to 8 users Remote control via SMS, voice menu and the MyJablotron portal 4 adjustable ARCs 5 selectable ARC profiles The control panel has built-in GSM/GPRS communicators that enable voice, SMS and GPRS communication with end users and ARCs. It is equipped with a memory card for saving the data of events, voice messages, saving photos etc. The control panel has: 1 terminal for BUS connection 1 internal connector dedicated to the radio module (JA-110R) 1 USB connector for control panel setting and transferring photos 1 connector for connecting another communicator or module (e.g. PSTN) Power supply: 230 V, 50 Hz Power supply unit: A (EN ) Back-up battery: 12 V, 2.9 Ah (2.2 to 7Ah) not included! Maximum battery charging time: 72 hours Max. continuous BUS load: 400 ma Max. continuous current output for 12 hour backup: 125 ma with a 2.6 Ah battery Max. number of enrolled devices: 50 Battery: A type (EN ) QUAD-BAND GSM communicator: 850/900/1 800/1 900MHz Operating frequency (with the JA-110R module): MHz ISM band Invalid code-entries exceeded: After 10 incorrect code entries Event memory: approx. 1 million latest events including date and time Security rating: 2 according to EN , EN , EN Environment according to EN : II., general indoor Radio transmission conformity: ETSI EN (R module), ETSI EN , EN EMC conformity: EN , EN 55022, ETSI EN Security conformity: EN Can be operated according to: ERC REC CLIP protocol (caller ID + SMS): ETSI EN

5 Control panel with built-in GSM/GPRS communicators and radio module The parameters are the same as those of the JA-101K and additionally it contains: a radio module JA-101KR Control panel with built-in GSM/GPRS/LAN communicators and radio module The parameters are the same as those of the JA-101K and additionally it contains: a JA-110R radio module a LAN communicator JA-101KR-LAN Control panel with built-in 3G/LAN communicator and radio module The 101KR-LAN3G is additionally equipped with a GSM 3G module, whose main benefit is an increase in the data transmission rate (especially photos) to the MyJABLOTRON application or to ARCs The parameters are the same as those of the JA-101K except for the following differences: JA-101KR- LAN3G The control panel does contain additionally a JA-110R radio module a LAN communicator a 3G GSM communicator Comparing control panels and communicators JA-101 family JA-101KR-LAN3G JA-101KR-LAN JA-101KR JA-101K LAN communicator 2G GSM communicators 3G GSM communicators Radio module JA-110R 5

6 JA-106 family Control panel with built-in GSM/GPRS and LAN communicators JA-106K The JA-106K is the all-inclusive version of the control panel of the JABLOTRON 100 security system. It enables flexible system setting and the smart protection of larger family houses, offices and companies. It also offers flexible solutions to the protection of residential estates, administrative buildings and companies that need a system with many sections. The installation can be implemented in a bus, wireless, or a combined design. The required adjustments and sizing of the system are programmed through F-Link software. The JA-106K control panel offers: up to 120 wireless or BUS zones up to 300 user codes up to 15 sections up to 32 programmable PG outputs 20 independent schedules SMS and voice reports from the system to up to 25 users Remote control via SMS, voice menu and the MyJablotron portal 4 adjustable ARCs 5 selectable ARC protocols The control panel has built-in GSM/GPRS and LAN communicators that enable voice, SMS, GPRS and LAN communication with end users and ARCs. It is equipped with a memory card for saving the data of events, voice messages, saving photos etc. The control panel has: 2 independent separate terminal boards for BUS connection 1 internal connector dedicated to the radio module (JA-110R) 1 LAN connector 1 USB connector for control panel setting and downloading photos 1 connector for connecting another communicator or module (e.g. PSTN) Power supply: 230 V, 50 Hz Power supply unit: A (EN ) Back-up battery: 12 V up to 18 Ah Maximum battery charging time: 72 hours Data BUS power supply: max. load 1.2 A Max. short-term output current (5 min.): 2 A Backup BUS supply: for the 18 Ah battery for 12 hours at a max. consumption of 1.2 A Event memory:approx. 1 mil. events containing date and time Alarm verification function by another detector or repeated response from the same one Detector with a selectable delay (10 s 2 min) Security level: grade 2 according to EN , EN , EN , EN , EN , EN Environment according to EN : II., general indoor Dimensions: mm The control panel can be purchased in a version with a JA-110R radio module (JA-106KR) Operating frequency of JA-110R: bidirectional Jablotron protocol at MHz 6

7 Control panel with built-in GSM/GPRS/LAN communicators and radio module The parameters are the same as those of the JA-106K and additionally it contains a JA-110R radio module JA-106KR Control panel with built-in 3G/LAN communicator The parameters are the same as those of the JA-106K and additionally it contains a 3G GSM communicator JA-106K-3G Control panel with built-in 3G/LAN communicator and radio module JA-106KR-3G PSTN communication module The JA-106KR-3G control panel is additionally equipped with a 3G GSM module, whose main benefit is an increase in the data transmission rate (especially photos) to the MyJABLOTRON application or to ARCs. The parameters are the same as those of the JA-106K except for the following differences: The control panel does contain additionally 2G/3G GSM communicators A radio module The JA-190X is a PSTN communicator module for the JA-106K control panel family and JA-101K control panel family. It offers CID ARC communication and voice messages. JA-190X 2 PSTN line terminals IN/OUT ARC protocols: CID DTMF, SIA DC-05 or SIA FSK by DC-03 standard CLIP detection Line failure detection Standards: EN Voice messages Comparing control panels and communicators JA-106 family JA-106KR-3G JA-106K-3G JA-106KR JA-106K LAN communicator 2G GSM communicators 3G GSM communicators Radio module JA-110R 7

8 BUS HARDWIRED DEVICES Access modules BUS access module with RFID JA-112E JA-113E The JA-112E is an RFID access module designed for controling an alarm system. It includes one control segment and if needed it can be equipped with maximum 20 JA-192E control segments. It allows control of an alarm system by using segments. It communicates by BUS and it is powered from the BUS. Implemented power consumption saving function during AC outage. It occupies one position in the alarm system. Power: via the control panel BUS, 12 V (9 15 V) Current consumption: lost AC 10 ma Standby: max. 15 ma RFID: EM 125 khz Dimensions: mm Environment according to EN : II., internal Security level: grade 2 according to EN , BUS access module with RFID and keypad The JA-113E is a the access module with controlling touch keys and an RFID reader designed for controling an alarm system. It includes one control segment and if needed it can be equipped with maximum 20 JA-192E control segments. It allows control of an alarm system by using segments. It communicates by BUS and it is powered from the BUS. Implemented power consumption saving function during AC outage. It occupies one position in the alarm system. Power: via the control panel BUS, 12 V (9 15 V) Current consumption: lost AC 10 ma Standby: max. 20 ma RFID: EM 125 khz Dimensions: mm Environment according to EN : II., internal Security level: grade 2 according to EN , BUS access module with LCD, keypad and RFID The JA-114E is an access module with an LCD, keys and an RFID reader designed for controling an alarm system. It includes one control segment and if needed it can be equipped with maximum 20 JA-192E control segments. It allows control of an alarm system by using segments. It communicates by the BUS and it is powered from the BUS. Implemented power consumption saving function during AC outage. It occupies one position in the alarm system. Menu options allow the convenient control of sections, zones, PG outputs and event reports. JA-114E Power: via the control panel BUS, 12 V (9 15 V) Current consumption: lost AC 15 ma Standby: max. 50 ma RFID: EM 125 khz Dimensions: mm Environment according to EN : II., internal Security level: grade 2 according to EN ,

9 Control segment for access modules JA-192E The JA-192E is a control segment for access modules JA-112E, JA-113E, JA-114E, JA-152E, JA-153E, and JA-154E. It allows the user to easily control functions in the alarm system: common segment partition control (SET, PARTIAL SET, UNSET) PG output control (PG ON and PG OFF) call up events (panic, medical alert and others) status indication BUS outdoor RFID reader JA-122E JA-123E Power: via the access module Standby consumption: 0.5 ma Dimensions: mm Environment according to EN : II., internal The JA-122E RFID chip reader can be used to activate a PG output. Can be used for example to control access (opening a door lock). Features a reading face and optical status signalling. Power: via the control panel BUS 12 V (9 15 V) Standby current: 15 ma RFID: EM 125 khz Dimensions: mm Operating temperature range: 25 C to +60 C Environment according to EN : IV., general outdoor, IP 65 Security level: grade 2 according to EN , EN Complies with standards: ETSI EN , EN , EN 55022, EN BUS outdoor keypad with RFID reader This keyboard with a contactless RFID chip reader can be used to activate a PG output (e.g. to manage access by door lock control) or to control security system sections. The keyboard has one operating segment, a reading face and optical status signalling. Signalling displays the status of the function assigned to the segment. The red LED indicates a set section/ activated PG, the green LED indicates an unset section/unactivated PG. Power: via the control panel BUS 12 V (9 15 V) Standby current: 15 ma RFID: EM 125 khz Dimensions: mm Operating temperature range: 25 C to +60 C Environment according to EN : IV., general outdoor, IP 65 Security level: grade 2 according to EN , EN Complies with standards: ETSI EN , EN , EN 55022, EN BUS emergency/control wall-mounted button The JA-112J BUS wall-mounted button is designed to release an emergency alarm or to control PG outputs. It is equipped with two buttons and a signal LED that can indicate pressing of a button on activation or switching a PG output on or off (with red/green light). It also has the function of the delayed activation of an emergency alarm (when the activation can be cancelled with repeated pressing). A delayed alarm is indicated by flashing of the red LED. The button is addressable and it occupies one position in the system. JA-112J Power supply: from the control panel BUS, 12 V (9 15 V) Consumption in idle state: 5 ma Dimensions: mm Environment according to EN : II., general indoor Operation temperature range: 10 C to +40 C Security level: grade 2 according to EN , EN , EN Complies with standards: EN , EN

10 BUS module for system control JA-111-AD TRB RS-485 BUS interface The JA-111H-AD TRB is designed for the connection of any control device (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply from the control panel bus. This built-in module can be directly integrated into the control device. One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed Unset signal. The module can be used to control programmable PG outputs. It allows you to set a minimum activation time for the controller (0.1 s 300 s). The detector features impulse activation for dual-conductor control as well as status control for single-conductor control. The module is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system. Compatible with: F-Link or higher Power: via the control panel bus 12 V (9 15 V) Backup (idle) mode consumption: 5 ma + consumption of the control device Current consumption for cable selection: 12 ma + consumption of the control device Maximum acceptable load by the connected controller: 50 ma Dimensions: mm Security level: 2/environment class II. In accordance with: EN , EN (ACE type B) Complies with standards: EN , EN JA-121T The JA-121T module is a universal adapter to RS-485 for other systems. It enables connection of the JABLOTRON 100 system BUS to an RS-485 serial line and vice versa. An application can be e.g. for the connection of a Smart Home system. It contains galvanically separated circuits for 4 kv. Data are sent in the case of a status change or on request. In the passive mode all data are only sent on request. The module is addressable and it occupies one position in the system. Power supply: via the control panel BUS 12 V (9 15 V) Module consumption in idle state: 10 ma RS-485 output part: 5 V (4.75 to 5.25 V) Galvanic isolation: 4 kv BUS RS-485 Max. cable length of the TMP terminal: 3 m Operation modes based on internal settings: ASCII interface bd Altonica communicator Dimensions: mm Environment according to EN : II., general indoor Operation temperature range: 10 C to +40 C Complies with standards: EN , EN

11 Detectors BUS PIR movement detectors BUS PIR motion detector It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90 / 12 m. The product is the result of very high quality and designer targets and with its aesthetic shape it even suits luxurious interiors in any installation variant. Besides standard positioning in a corner of a room it can be installed on a wall surface using an aesthetic JA-193PL frame when the detector is partly recessed and blends in with the wall in an elegant way. For special applications as e.g. ceiling mounting or an inclined detection angle the JA-191PL articulated holder can be used. JA-111P-WW The detector has impulse activation. The detector can be used to control programmable PG outputs. The resistance to false alarms is adjustable on two levels. The detector is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system. BUS PIR motion detector Compatible with: F-Link or higher Power: via the control panel bus 12 V (9 15 V) Backup (idle) mode consumption: 2 ma Current consumption for cable selection: 10 ma Recommended installation height: 2.5 m above the floor level Detection angle/detection coverage: 90 /12m Dimensions: mm Classification: security level 2/environment class II. In accordance with: EN , EN Environment according to EN : II., indoor, general It also meets the requirements of: EN , EN The parameters are the same as those of the JA-111P-WW except for the following differences: JA-11P-WG is the version with a grey lens its resistence to white light significantly exceeds the values prescribed by the standard, which helps to reduce false alarms caused e.g. by car lights shining through windows, lightning or reflective items. JA-111P-WG Note: For the JA-111P-WW and JA-111P-WG, accessories such as the JA-191PL, a jointed bracket for JA-1x1P PIR detectors, the JA-193PL-BOX-S wall mounting box for JA-1x1P PIR motion detectors, the JA-193PL-F-S-G frame for a PIR wall mounting box small grey and the JA-193PL-F-S-W frame for a PIR wall mounting box small white are available. For more information see the Accessories chapter. 11

12 BUS PIR motion detector JA-110P BUS motion and glass-break detector JA-120PB The JA-110P is a BUS PIR motion detector designed for interior protection. It detects movement with a human body temperature. The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALL WAY, JS-7906 PET or JS-7901 CURTAIN. The immunity level is selectable to two levels. The Alarm memory function is an optional setting allowing the easy indication and location of an alarm. It occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of a triggered detector. SMI is cleared through the keypad. Power: via the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Mounting height: 2.5 m above the floor Detection range: 110 /12 m (with standard lense) Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., internal Complies with standards: EN , EN The JA-120PB detector is designed to detect human movement inside buildings and the breaking of glass panes. It contains two independent detectors (occupies two positions in the alarm system). It uses a PIR sensor to detect human movement. Glass breaking is detected by the GBS glass-break sound detector. Detection is based on dual technology (detection of air pressure changes accompanied by the characteristic sound of breaking glass). Features adjustable sensitivity. Power: via the control panel BUS 12 V (9 15 V) Standby current: 5 ma Mounting height: 2.5 m above the floor PIR detection angle/range: 110 /12 m (with standard lens) GBS detection distance: 9 m (glass pane min m) Dimensions: mm Security level: grade 2 according to EN , EN , CLC/TS Environment according to EN : II., general indoor Complies with standards: EN , EN BUS combined PIR and MW motion detector JA-120PW The JA-120PW detector is designed to detect human body movement inside buildings. The detector is highly resistant to false alarms due to the combination of PIR motion and microwave detection. The detector guards as a standard PIR detector and as soon as it detects movement in the protected area it activates the microwave detector which confirms the earlier PIR activation. The alarm is sent to the system s control panel only after the movement is confirmed by the MW detector. The MW is only activated when the PIR sensor has detected movement. MW unit is switched off when alarm is unset. PIR detection characteristics can be optimized by using interchangeable lenses. The detector occupies one position in the alarm system. Power: via the control panel BUS 12 V (9 15 V) Standby current: 5 ma Mounting height: 2.5 m above the floor Detection angle/range: 110 /12 m (with standard lens) Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., general indoor Operational temperature range: 10 C to +40 C Complies with standards: EN , EN

13 Bus PIR motion detector with 90 photo-verification camera JA-120PC (90) The detector serves for the detection of human movement in building interiors and visual alarm confirmation. The camera takes colour photos by detecting human movement while the system is set. Every picture is taken as a double exposure: the first with low resolution (LQ = pixel), the second with high resolution (HQ = pixel). The camera is equipped with a visible flash for taking photos in the dark. The images are saved in the internal memory (micro SD card on the detector PCB) of the detector and then they are forwarded to the control panel (lower resolution). The images can be sent to an ARC and a user. The user can receive imagines automatically by SMS or . They are also available on the MyJABLOTRON Web Self Service (WSS) application which you can have on your smartphone, tablet or computer where you can browse through the images. For fast reporting the pictures are sent and displayed in LQ, however if needed, then by single click in the WSS it is possible to request HQ image too. The detector can also take a photo on command if it is required (e.g. for fire alarm confirmation) by PG output reaction or by a request sent from the WSS. The detector offers the option to send pre-alarm images. When this parameter is enabled the detector will send photos from a set section if an alarm has not been triggered yet (for example during the entrance delay). The PIR immunity level is selectable to two levels. The standard level combines a basic immunity level with a rapid reaction. The increased level provides a higher immunity but the detector reaction is slower. Power: via the control panel bus +12 V ( V) Detection angle/detection coverage: 90 /12m (with standard lens) Flash range: max. 3 metres Resolution of photos: LQ ; HQ pixel Classification: security level 2 / environment class II Operating temperature range: -10 to +40 C Dimensions: 110 x 60 x 55 mm In accordance with: EN , EN It also meets the requirements of: EN , EN BUS PIR motion detector with camera The detector serves for the detection of human movement in building interiors and visual alarm confirmation. This is a variant of the JA-120PC (90) detector with a narrow viewing angle (43 ). JA-120PC Power: from the control panel BUS 12 V (9 15 V) Viewing angle/detection range: 43 /12 m (with standard lens) Flash range: max. 3 metres Resolution of photos: LQ ; HQ pixel Classification: security level 2 / environment class II Operating temperature range: -10 to +40 C Dimensions: 110 x 60 x 55 mm In accordance with: EN , EN It also meets the requirements of: EN , EN

14 BUS perimeter protection detectors BUS module for magnetic detectors 2 inputs JA-110M The JA-110M connects to a magnetic door opening detector and has two independent programmable inputs NC, NO or EOL resistor. It filters triggering time (0.5 s, 1 s, 2 s or 5 s). Communicates and is powered by the control panel BUS. The alarm memory function allows the easy indication and location of an alarm. It is addressable and occupies two positions. Smart memory indication (SMI) provides visual LED triggering verification. SMI is cleared through the keypad. BUS magnetic opening detector Power: via the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Connection wire length between module and magnetic contacts: up to 3 meters Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., internal The device detects door or window opening. Communication with the control panel runs via the BUS. The detector is equipped with a sabotage protection cover activated after cover opening. The sensor is activated after the permanent magnet moves away from the sensor. The device occupies a single position in the security system. JA-111M Power: from the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Detector size: mm Magnet size: mm Security level: grade 2 according to EN , EN Operation temperature range: 10 C to +40 C Complies with standards: EN , EN JA-111MB BUS acoustic glassbreak detector The JA-110B BUS glass break detector detects the breaking of glass windows. Dual technology detection (air pressure and sound analysis) is used. The sensitivity is adjustable. The detector communicates on the control panel BUS and it is powered by the BUS. The alarm memory function is an optional setting allowing the easy indication and location of an alarm. The detector occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of a triggered detector. SMI is cleared through the keypad. JA-110B Power: via the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Mounting height: 2.5 m above the floor Detection range: up to 9 m Minimum glass dimensions: meters Initialization: maximum 60 seconds Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., internal 14

15 BUS shock or tilt detector JA-111SH The JA-111SH BUS detector features two modes of operation. Jolt (vibration) detection mode sensed on doors, windows, light partitions etc.; may indicate an attempt to break through using force. Tilt detection mode may indicate unwanted tampering with a valuable object to which the detector is firmly connected (e.g. safes, artwork, etc.). The detector uses a semiconductor three-axis accelerometer with a digital output. Digital signal processing provides high immunity to false alarms. The system occupies one position in the system. Power: via the control panel BUS 12 V (9 15 V) Standby current: 5 ma Dimensions: mm Security level: grade 2 according to EN , CLC/TS Environment according to EN : II., general indoor Complies with standards: EN , EN BUS connection module for magnetic detectors JA-118M The JA-118M BUS module provides 8 inputs designed especially for connecting magnetic detectors. Reaction of each input can be independently programmed as single balanced, NC or special windows shutters input which is triggered by repeated activation pulses. Line length is max. 100 m for one loop. The module can be installed into the JA-190PL universal box or KU-68 wall-mounted box. It is addressable and occupies 8 positions. Power: via the control panel BUS 12 V (9 15 V) Standby current: 5 ma Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., general indoor Complies with standards: EN , EN BUS environmental detectors BUS combined smoke and heat fire detector The JA-110ST detects fire inside residential or commercial premises. It allows: smoke and heat, smoke or heat, smoke only, heat only. The alarm memory function lights the LED after the alarm state. The detector occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED triggering verification. SMI is cleared through the keypad. JA-110ST Power: via the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Fire detection: optical and heat Fire detection sensitivity: m = db/m EN 54-7 Temperature detection: class A2 of EN 54-5 Alarm temperature: +60 C to +70 C Dimensions: diameter 126 mm, height 50 mm Operating temperature range: 10 C to +70 C 15

16 BUS combined smoke and temperature detector JA-111ST BUS temperature detector JA-111TH BUS flood detector The JA-111ST is unique BUS fire detector certified according to EN 14604, EN 54-5 and EN 54-7 standards. It contains two separate detectors an optical smoke detector and a temperature detector detecting fire or increased temperature in residential and commercial buildings. The detector allows you to set various detection options: smoke and elevated temperature, smoke or elevated temperature, only smoke or only elevated temperature. The detector indicates a dangerous situation optically with an integrated lamp and with an acoustic signal. It occupies one position in the security system. Power: via the control panel BUS 9 15 V DC/3.5 ma (150 ma in the case of an alarm) 3 alkaline batteries AA 1.5 V Typical service life of the batteries: about 3 years Smoke detection: optical diffusion of light Smoke detector sensitivity: m = db/m in accordance with EN 14604, EN 54-7 Temperature detection: class A1 in accordance with EN 54-5 Alarm temperature: +60 C to +65 C Operating temperature range: 10 C to +70 C Dimensions: diameter 126 mm, height 52 mm The JA-111TH is a BUS temperature detector for measuring the current temperature. The measured data is forwarded via the control panel to the MyJABLOTRON application. MyJABLOTRON can control the heating via a programmable (PG) output of control panel based on measured temperature. The MyJABLOTRON app can send SMS or reports about undershooting / overshooting the set temperature and can chart the change in temperature for the selected time period. Power via the control panel bus 12 V (9 15 V) Backup (idle) mode current consumption: 5 ma Current consumption for cable selection: 5 ma Dimensions: 55 x 27 x 16 mm Range of measured temperatures: -20 C to +60 C Operating temperature range: -20 C to +60 C Measurement accuracy in the range of operating temperatures: ± 0.1 C It also meets the requirements of: EN , EN The detector indicates space (cellar, bathroom etc.) flooding. This information is transmitted to the control panel via the BUS. When the electrodes are flooded the detector sends an activation signal. When electrode flooding retreats a standby signal is sent. The detector has no tamper and occupies a single position in the system. JA-110F Power: from the control panel BUS 12 V (9 15 V) Detector: Reacts to electrode flooding with water Dimensions: mm Operational temperature range: 10 C to +40 C Complies with standards: EN , EN JA-110G-CO BUS module for connection of an Ei208W(D) CO detector This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its BUS connection to the JABLOTRON 100 system. It transmits information about an alarm, detector activation and detector battery status to the system. It occupies one position in the system. JA-110G-CO Power supply: via the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Dimensions: mm Environment according to EN : II., general indoor In conformity with: EN , EN 55022, EN

17 Bus indoor thermostat Designed to measure and control the indoor temperature. The thermostat expands the application range of the JABLOTRON 100 system in the domain of home automation with simple zone control. For switching the heating, standard control panel programmable outputs are used. JA-110TP Power: via the control panel bus +12 V ( V) Backup (idle) mode consumption: 1,5 ma Current consumption for cable selection: 1,5 ma Recommended installation height: 1.5 m above floor level Dimensions 66 x 90 x 22 mm Operating temperature range: -10 to +70 C Measurement accuracy in the range of operating temperatures: 0.1 C It also meets the requirements of EN , EN Detector accessories Bus module interface for wire detector The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply. This built-in module can be directly integrated into the detector. JA-111H TRB One input of the module has a fixed Tamper signal, the second input reports an alarm signal and the third input is used to report a fault of a connected device or to report a special Masking signal (for detectors with an Anti-masking function). The module can also be used for the connection of a CT-01 roller blind detector. The module can be used to control programmable PG outputs. It supports setting of a minimum activation time for alarm triggering (0.1 s 300 s). The detector features status as well as impulse activation. The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system. Compatible with: F-Link or higher Power: via the control panel bus 12 V (9 15 V) Backup (idle) mode consumption: 5 ma + consumption of the control device Current consumption for cable selection: 12 ma + consumption of the control device Maximum acceptable load by the connected control: 50 ma Dimensions: mm Classification: security level 2/environment class II. In accordance with: EN , EN (ACE type B) It also meets the requirements of: EN , EN

18 BUS four-input and four-output module JA-114HN A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse. Besides the EOL resistor type, the values of resistors can also be set for the inputs. The outputs are designed as galvanically separated ones (two have a common C terminal in each case). The module occupies four positions in the control panel and it is equipped with a front and rear tamper sensor. BUS expander 16 inputs It is mainly suitable for the refurbishment of wired alarms, where old detectors are kept. They are also very frequently used to control multiple appliances through the PG outputs. The auxiliary power supply makes it possible to supply current to boost relays connected to the signal output. Compatible with: F-Link or higher Power: via the control panel bus: 12 V (9 15 V) Backup mode consumption: 25 ma + consumption of connected devices Current consumption (maximum) for cable selection: 25 ma + consumption of connected devices Maximum current from an output +U (electronic fuse): 200 ma Maximum current/voltage switched by each output: 500 ma/38 V Max. measured resistance at an input: 20 kω Max. length of supply lines of the inputs: 100m Dimensions: mm Classification: security level 2, ACE type B in accordance with: EN , EN Environment according to EN : II., general indoor It also meets the requirements of: EN , EN JA-116H The JA-116H BUS expander provides option for powering and connecting of up to 16 conventional hardwired detectors with contact outputs to the JABLOTRON 100 system. Reaction of each input can be independently programmed as single balanced, double balanced, NC or NO contact. For balanced inputs it is possible to select one common value of connected resistors. Supported resistances are 1k; 2k2; 3k3; 4k7; 5k6 and 10k. The module can be installed directly into the JA-106K control panel or other installation boxes protected by a tamper contact. It is addressable and occupies 16 positions. Power: via the control panel BUS 12 V (9 15 V) Standby current: 5 ma Load of connected devices: max ma Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., general indoor Complies with standards: EN , EN

19 Sirens BUS internal siren JA-110A Outdoor BUS siren The JA-110A BUS internal siren is designed to sound alarms, exit and entrance delays, chirps and PG output activations in the alarm system. The siren is equipped with a button with programmable function. Implemented alarm verification feature. The siren communicates and is powered by the control panel BUS. It occupies one position in the alarm system. Power: via the control panel BUS 12 V (9 15 V) Avg. standby consumption: 5 ma; alarm consumption 30 ma Siren: piezo electric, 90 db/m Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : II., internal The JA-111A RB BUS siren is designed for the acoustic indication of alarms and the activation and deactivation of PG outputs in a security system. The siren communicates via the BUS of the control panel and is powered by it. It has an implemented energy saving function in the case of a power supply failure as well as an integrated spirit level for accurate and precise setup. It occupies one position in the alarm system. Alternative covers are available for the siren in a stainless-steel or plastic design in white or grey. Covers are offered in designs with a red or blue signal. It is addressable and it occupies one position in the alarm system. JA-111A BASE-RB Power: via the control panel BUS 12 V (9 15 V) Consumption: 5 ma in the case of an AC failure Consumption during battery charging: 50 ma Backup battery: NiCad pack 4.8 V/1 800 mah Battery service life: 3 years Siren: piezoelectric, min 100 db/m Dimensions: mm Security level: grade 2 according to EN , EN Environment according to EN : IV., general outdoor, IP 45 Operating temperature range: 25 C to +60 C Ingress protection class: IP 45 JA-1X1A-C-WH JA-1X1A-C-WH-B JA-1X1A-C-GR JA-1X1A-C-GR-B JA-1X1A-C-ST JA-1X1A-C-ST-B PG output and indicator modules BUS power output module PG JA-110N The JA-110N BUS power output module PG is designed to offer one switchable output relay (220 V/16 A) with a NO or NC setting. An appropriate PG output is programmed by DIP switches (operates one of PG outputs 1 32). The module communicates by the BUS and it is powered from the control panel BUS. It can be installed in a JA-190PL housing. It is not addressable. Power: via the control panel BUS 12 V (9 15 V) Switched off consumption: 5 ma Switched on consumption: 45 ma Maximum output relay load: max. 16 A/250 V Reactive load: max. 8 A/250 V Minimum switching current: 100 ma at 12 V DC or 0.5 W Environment according to EN : II., internal 19

20 BUS signal output module PG JA-111N The JA-111N BUS signal output module PG is designed to offer one switchable relay (1 A) with a NO or NC setting. An appropriate PG output is programmed by DIP switches (operates one of PG outputs 1 32). The module communicates by the BUS and it is powered from the control panel BUS. It can be installed in a JA-190PL housing. It is not addressable. Eight-Channel BUS output module JA-118N Power: via the control panel BUS 12 V (9 15 V) Switched off consumption: 5 ma Switched on consumption: 25 ma Maximum output relay load: max. 2 A/60 V DC Minimum switching current: 10 ma Environment according to EN : II., internal The eight-channel output module provides outputs for the signalling of the security status of up to 8 sections, the signalling of IW/EW alarms in the 8 sections or the conditions of up to 8 PG outputs. It is designed for installation in a JA-190PL multipurpose box or on a DIN board. Its outputs are isolated from the BUS. Setting is done by a DIP switch. The module occupies no position in the system. BUS PG-DIN power output module Power: from the control panel BUS 12 V (9 15 V) Setting: By DIP switch Outputs: Providing +U voltage Output load capacity: 100 ma The JA-110N-DIN power output module is DIN-rail mounted. It provides a PG output power relay switch. It has been designed for mounting on a DIN rail and for switching mainspowered output devices (up to 230 V/16 A). It is connected to a system BUS through which it is also powered. It has to be enrolled into the system and occupies one position. JA-110N-DIN Power: via the control panel BUS 12 V (9 15 V) Standby current: 5 ma/45 ma Relay contact rating: max. 16 A/250 V (inductive load max. 8 A/250 V) Minimum DC switching power: 0.5 W Dimensions: mm Environment: general indoor 20

21 BUS module for control of an electric lock JA-120N The JA-120N module is designed for the power supply and control of electric locks and release systems from the system BUS. It is fitted with batteries that ensure the initial current impulse required to open el. locks. The JA-120N can be conveniently installed in all places where an external power supply for electric lock control would be difficult to install. To module responds to a PG output of the control panel or it can be activated with a button connected to the IN input (it can be optionally locked by section control). The module is addressable and it occupies one position in the system. Power supply: via the control panel BUS 12 V (9 15 V) Back-up battery: V NiMh Eneloop AA HR-3UTGA mah Module consumption in idle state: 10m A/60 ma (without/with battery recharging) DOOR output load: impulse (1 s) 600 ma, permanent 300 ma Recommended locks: manufacturer Bera s.r.o type: Befo or Befo (requiring external power supply) Dimensions: mm Environment according to EN : II., general indoor Operation temperature range: 0 C to +40 C (for NiMh Eneloop) 10 C to +40 C (for NiCd) Security level: grade 2 according to EN , EN Complies with standards: EN , EN 55022, EN UR-01 Versatile DIN-rail mounted relay The UR-01 features switching contacts with galvanic and safety isolation for the switching of 230 V AC/16 A power loads, which can be used in one of eight selectable modes. The relay is designed for installation on a DIN rail and its characteristics are set with the use of switches under a cover. UR-01 It offers 8 functions: Switching relay standard NO/NC relay Bistable relay e.g. for lighting control by button from multiple locations Bistable relay with time limitation e.g. for light control from multiple places (but the light will not remain on longer than the set time) Delayed disconnection e.g. for the rundown of a fan Delayed switch on startup of an electric motor in star delta mode. Impulse by leading edge activation of an appliance for a specified time Impulse by trailing edge e.g. to switch on a fan after turning the lights off Regular impulses at a set interval it will activate a device for 10 min e.g. for the regular heating of a heating ladder in a bathroom Power supply: 230 V AC/50 Hz, protection class II. Power consumption: 0.3 W/max. 0.8 W Input A: 230 V AC Loading capacity of the power relay contacts: (galvanically isolated from the control terminals) protection class II. Max. switched voltage: 250 V AC/24 V DC Resistive load (cosφ=1): max. 16 A Inductive, capacitive load (cosφ=0.4): max. 8 A Halogen lighting: max W Direct current (DC): 384 W Minimum switched DC power 0.5 W Wire cross section: max mm 2 ; max mm 2 Dimensions: mm, 1 DIN module Ingress protection class: IP 20, IP 40 for the front panel (EN 60529) In conformity with: EN , EN , EN

22 BUS section/output PG activation indicator JA-110I Universal LED indicator RGB The JA-110I indicates activations (SET) of a section or PG output (1 32) by RED LED. It is connected by BUS to the control panel. It does not occupy any position in the alarm system. LED ON consumption: 5 ma LED OFF consumption: 2 ma Environment according to EN : II., internal Dimensions: mm The JA-111I indicates activations of a section (SET) or PG output activations (1 32) by multicolour LED (red, green, blue and yellow). JA-111I LED ON consumption: max. 4 ma LED OFF consumption: 0 ma Dimensions: mm Accessories BUS short circuit isolator module JA-110T The JA-110T BUS isolator is designed to separate and protect unsecured parts of BUS wiring. It is powered from the control panel BUS. It can be installed in a JA-190PL housing box. It does not occupy any position in the alarm system. Power: via the control panel BUS 12 V (9 15 V) Standby consumption: 5 ma Maximum terminal load: 250 ma Switch off current 300 ma Security level: grade 2 according to EN , EN Jointed bracket for JA-1x1P PIR detectors It is used to attach PIR motion detectors of the JA-1x1P series to a ceiling or to a wall if positioning that is different from a standard mounting is required. The holder is a certified accessory of the detectors of the JA-1x1P series and it is delivered including a tamper contact that can be connected to a connector in the detector. JA-191PL Wall mounting box for JA-1x1P PIR motion detectors Frame for a PIR wall mounting box small gray Frame for a PIR wall mounting box small white JA-193PL-BOX-S JA-193PL-F-S-G JA-193PL-F-S-W The holder has been designed for the installation of a PIR detector of the JA-1x1P series onto a plasterboard or brick wall. Thanks to this way of installation the detector in partly flush-mounted and fits the wall in a very elegant way. The wall holder is available in two colour versions white and grey. Mounting holes for an S size frame (JA-111P): mm 22

23 Multipurpose installation box JA-190PL The JA-190PL multipurpose installation box for various modules of the JABLOTRON 100 system mm IP 40 Resistant up to 250 V ABS material Multipurpose installation box medium size A design installation box for Jablotron modules, fitted with a front and rear tamper switch. Suitable for input and output modules, hubs etc. Besides standard wall mounting it can also be installed directly onto a sub-plaster box of the KU-68 type. Supported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110Z, JA-110N, JA-111N, JA-150N, JA-151N, JA-118N,... JA-194PL Dimensions: mm Multipurpose outdoor installation box JA-192PL-A multi-purpose outdoor installation box for individual modules of the JABLOTRON 100 system. JA-192PL-A External antenna Ingress protection class: IP 65 Dimensions: internal mm external mm The AN-868 and AN-868-2PIN external antennas are designed to extend the communication range of wireless devices of the Jablotron security system using a frequency of MHz. The special design of the PIFA type provides the antenna with not only very good transmitting properties on different bases, but also tamper detection in the case of interruption or short-circuiting of the power supply (this functionality must be supported by the connected device). The antenna is suitable for both indoor and outdoor environments. AN-868 AN-868-2PIN The AN-868-2PIN version is connected using a 2-pin connector that is used in devices of older systems and the present components of the JABLOTRON 100 system. The AN-868 version is connected using a 3-pin connector that is used in newly developed devices of the JABLOTRON 100 system. Communication frequency: MHz Antenna gain: max. 3 dbi Impedance: 50 Ω Cable length: 2 m Environmental class according to EN : IV. Operation temperature range: 20 C to +60 C Classification according to EN : security grade 2 (only for AN-868 version) 23

24 Rod antenna An outdoor rod antenna with a magnetic base for signal improvement for devices using 2G and 3G GSM networks. For the products: JA-6xGSM, JA-8xY, JA-101Kxx, JA-106Kxx, GD-0x, CA-18xx AN-05 2G/3G Dimensions: mm Operating temperature range: 40 C to +60 C Bands: MHz Antenna gain: 4 dbi Conductor length: 3 m Connector: SMA JA-110Z Addressable BUS terminal module JA-110Z The product is designed for branching the BUS of the JABLOTRON 100 system. It is protected from being attacked by a pair of tamper contacts. It is supplied in a suitable JA-190PL mounting box. In addition, the terminal module contains 2 4 terminal boards connected in parallel to provide the possibility of interconnecting independent branches. It occupies one position in the system. Bus back-up booster unit for JA-100 Power supply: via the control panel BUS 12 V (9 15 V) Current consumption in backup mode (idle): 5 ma + connected devices Current consumption for cable selection: 5 ma + connected devicess Dimensions: mm Classification according to: EN , EN class 2 Environment according to EN : II., general indoor Operating temperature range: 10 C to +40 C In conformity with: EN , EN Designed for current boosting of the bus, extension of the line length and galvanic isolation of the bus. Output current max. 2A 2 independent bus output terminal boards - each providing 500 m of bus length JA-120Z Mains supply (83PWR power supply): V Power input: 50 VA Input part Power via the control panel bus: 12 V DC (9 15 V) Current consumption: Nominal for backup calculation: 10 ma Maximum for cable selection: 10 ma Output part Output supply voltage: typically 13.7 V DC Maximum total current load 2 A Galvanically isolated: (test voltage 4 kv) General Rechargeable battery 12V: 7 18 Ah Battery type: lead, gel type Dimensions of the electronic unit: 102 x 66 x 14 mm Dimensions of the power supply unit: 170 x 80 x 65 mm Dimensions of the PLV-CP-L plastic housing: 357 x 297 x 105 mm The PLV-CP-L plastic housing is not included in the delivery! Classification: security level 2/environment class II 24

25 BUS terminal module The JA-110Z-B and C modules are designed to allow you to join BUS lines in the JABLOTRON 100 system. It can be installed in a JA-190PL. JA-110Z-B Maximum voltage: AC 42 V Maximum voltage: DC 60 V Maximum current: 2 A JA-110Z-C Installation wire for the JABLOTRON 100 system Quality wire designed for installation. Wire colours are identical to terminal colours. It is packed in a box and for easy navigation it is marked with black ink once per metre. CC-01 CC-02 CC-03 CC-11 Label printer CC-01 (300m in box): AWG (0.5 mm 2 ) AWG (0.2 mm 2 ) CC-02 (300m in box): AWG (0.2 mm 2 ) CC-03 (250m in box): AWG (0.5 mm 2 ) AWG (0.2 mm 2 ) CC-11 (200m in box): AWG (0.5 mm 2 ) AWG (0.2 mm 2 ) Flammability class B2CA - s1, d0, a1 PT-P700 The label printer enables the printing of labels for the control segments of access modules (keyboards) right at the place of installation. Labels can be printed directly from F-Link program version or higher from the internal settings of the access modules (printer drivers must be installed for this function). The printer can also be used to print labels using the P-Touch Editor Lite program, which is installed directly in the printer without any necessity to install drivers. Power supply: AD-E001 EU mains adapter (included in the delivery) or 6 AA alkaline batteries (LR6)/1.5 V (not included in the delivery) USB port: USB mini B (included in the delivery) Cartridge with a tape for other printing: w 24 mm/l 3 m (included in the delivery) Laminated tape for PT-2430PC and PT-P700 printer PT-TAPE02-BW 25

26 RADIO DEVICES BUS interface for JA-100 wireless devices The JA-111R radio bus module is used to connect all wireless devices of the JABLOTRON 100 system. To perfectly cover the supervised premises, up to 3 JA-111R modules can be installed in a system. JA-111R The electronic unit is installed in the front part of the cover and it is fitted with a slide-in terminal board, which enables convenient connection of cables. In the rear part, there are break-off holes for cables. The module communicates with the bus of the control panel and is powered by it. The module is designed for installation outside the control panel and it is used as the second or third one in the system. If you need to have a radio module in the control panel, we recommend you to buy a control panel with a radio module the JA-10xKR-xx unit. Compatible with: F-Link or higher Power: via the control panel bus: 12 V (9 15 V) Backup (idle) mode consumption: 35 ma Current consumption (maximum) for cable selection: 80 ma Communication frequency: MHz Dimensions: mm Classification: security level 2, ACE type B in accordance with EN , EN , EN Environment according to EN : II., general indoor It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC

27 BUS interface for JA-80 one-way wireless devices A radio module designed for communication of the JABLOTRON 100 system with one-way wireless devices of the JABLOTRON 80 Oasis system. It supports the modernization of a wireless Oasis system to a JABLOTRON 100 system with some of the original devices (e.g. detectors) kept. The JA-110R 80 radio module can be combined in the system with JA-11xR modules that communicate with JABLOTRON 100 components (e.g. keypads, sirens, camera PIR detectors etc.). JA-110R 80 Devices supported by the JA-110R 80 module: JA-8x detectors RC-8x remote controls Non-supported devices: JA-8xF keypads JA-84P camera PIR detectors JA-80Z repeater JA-80x sirens TP-xx thermostats AC-8x and UC-82 output modules JA-8xK control panels Compatible with: F-Link and higher Power: via the control panel bus: 12 V (9 15 V) Backup (idle) mode consumption: 25 ma Current consumption (maximum) for cable selection: 25 ma Communication frequency: MHz Dimensions: mm Classification: security level 2, in accordance with: EN , EN , EN Environment according to EN : II., general indoor It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC One-way signal repeater for JA-100 wireless devices Designed to extend the communication distance and to increase transmission reliability in large installations. It repeats the signal of all one-way devices from JABLOTRON 100 It also supports non-addressable PG modules, one-way key fobs and JA-15xJ MS key fobs JA-150R Power supply: V AC / Hz, device of protective class I. Internal consumption, typical / maximum approx.: 0.5 W / 1 W (at 230 V AC) Backup battery NiCD 4.8V (BAT-4V8-N900): 900 mah Battery service life: about 4 years Radio communication: MHz Communication range approx. 300 m (free terrain) Antenna: internal with the possibility to connect an external antenna, typ AN-868 Dimensions: 132 x 182 x 45 mm Classification: security level 2, type B in accordance with: EN , EN , EN Environment according to EN : II., general indoor Operating temperature range: -10 C to +40 C It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC

28 Wireless access modules Wireless access module with RFID JA-152E The JA-152E is 2-way wireless RFID access module designed for controling an alarm system. It includes one control segment and if needed it can be equipped with maximum 20 JA-192E control segments. It allows control of an alarm system by using segments. Implemented Smart Radio Wake-up (SRW) entrance function allowing automatic ending of sleep mode in set systems during the entrance delay time. It is battery powered by alkaline batteries. It occupies one position in the alarm system. Power: 2 alkaline batteries AA 1.5 V Typical lifetime: 1 year Communicating protocol: Jablotron 2 way MHz RFID: EM 125 khz Radio coverage: up to 200 meters (in an open area) Dimensions: mm Security level: grade 2 according to EN , EN , EN , EN Environment according to EN : II., internal Wireless access module with RFID and keypad JA-153E The JA-153E is 2-way wireless keypad with an RFID access module designed for controling an alarm system. It includes one control segment and if needed it can be equipped with maximum 20 JA-192E control segments. It allows control of an alarm system by using segments. Implemented Smart Radio Wake-up (SRW) entrance function allowing automatic ending of sleep mode in set systems during the entrance delay time. It is battery powered by alkaline batteries. It occupies one position in the alarm system. Power: 2 alkaline batteries AA 1.5 V Typical lifetime: 1 year Communicating protocol: Jablotron 2 way MHz, RFID: EM 125 khz Radio coverage: up to 200 meters (in an open area) Dimensions: mm Security level: grade 2 according to EN , EN , EN , EN Environment according to EN : II., internal Wireless access module with display, keypad and RFID The JA-154E is a two-way wireless access module with an LCD display, a keypad and an RFID reader for security system control. The module includes one control segment and can be equipped with up to 20 JA-192E control segments. The segments are used for security system control. The implemented function of smart radio activation by the Smart Radio Wake-up input (SRW) allows for the automatic interruption of sleep mode in a set systém during the entrance delay. The module is powered by alkaline batteries. The module is addressable and occupies a single position in the security system. JA-154E Power: 4 AA 1.5 V alkaline batteries Typical battery life: 1 year Operational frequency: two-way Jablotron MHz protocol, RFID: EM 125 khz Communication range: up to 200 metres (in an open area) Size: mm Security level: grade 2 according to EN , EN , EN , EN Environment according to EN : II., general indoor Operation temperature range: 10 C to +40 C 28

29 Control segment for access modules JA-192E The JA-192E is a control segment for access modules JA-112E, JA-113E, JA-114E, JA-152E, JA-153E, and JA-154E. It allows the user to easily control functions in the alarm system: common segment partition control (SET, PARTIAL SET, UNSET) PG output control (PG ON and PG OFF) call up events (panic, medical alert and others) status indication Mains adaptor 12 V/0.5 A Power: via the access module Standby consumption: 0.5 ma Dimensions: mm Environment according to EN : II., internal Power adaptor with a 1.1 m flexible cable terminated by a plug is intended for powering Jablotron devices like wireless keyboards, GSM communicators or UC receivers etc. The compact dimensions of the case allow installation into a standard electro-installation junction box for hidden installation beneath Jablotron wall-boxmounted products such as the above-mentioned items. The screw holes for M3 screws are also useful for installation in typical junction boxes where fixing is required. DE06-12 Power: 100 ~ 240 V/50 Hz Output voltage: 12 V DC (±2%) Output current: 500 ma (max ma for less than 5 min.) Short circuit and temperature overloading protection: Yes Size: mm Environment according to EN : II., general indoor Operational temperature range: 10 C to +40 C Complies with standards: EN , EN , EN , 3-3, 6-1, 6-3, EN 5502 Wireless detectors Wireless PIR movement and combined detectors Wireless motion PIR detector JA-150P The JA-150P is a PIR motion detector designed for interior protection. It detects of human movement in building interiors. The detection characteristic may be optimised by using the alternative lenses JS-7904 LONG HALLWAY, JS-7906 PET or JS-7901 CURTAIN. The immunity level is selectable to two levels. It is powered by two alkaline batteries. SMARTWATCH is a default setting intended for the permanent monitoring of movement in the guarded area. If permanent movement is detected, three reports are sent every 20 s. Then next report is then sent after 2 minutes. If the detector does not detect any movement for 10 minutes, the mode with three reports every 20 s is used again. The other available detector mode is one minute interval. It occupies one position in the alarm system. Power: 2 alkaline batteries AA 1.5 V Typical lifetime: about 2 years (the longest lifetime is achieved in SMARTWATCH mode) Communicating protocol: MHz Radio coverage: up to 300 meters (in an open area) Mounting height: 2.5 m above floor Detection range 110 /12 m (with standard lense) Dimensions: mm Security level: grade 2 according to EN , EN , EN Environment according to EN : II., internal 29

30 Wireless PIR motion detector It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90 /12 m. It has an implemented SMART WATCH function for the acknowledgment of alarms and the subsequent extension of battery service life. The product is the result of very high quality and designer targets and with its aesthetic shape it even suits luxurious interiors in any installation variant. Besides standard positioning in a corner of the room it can be installed on a wall surface using an aesthetic JA-193PL frame when the detector is partly recessed and blends in with the wall in a very elegant way. For special applications such as e.g. ceiling mounting or an inclined detection angle the JA-191PL articulated holder can be used. JA-151P-WW The detector has impulse activation. The detector can be used to control programmable PG outputs. The resistance to false alarms is adjustable on two levels. The detector is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system. Wireless PIR motion detector Compatible with: F-Link or higher Power supply: 2 AA alkaline batteries (LR6) 1.5 V mah (Warning: Batteries are not included in the product package) Typical battery life: approx. 2 years (longest in SMART WATCH mode) Communication band: MHz, JABLOTRON protocol Communication range: approx. 300 m (free terrain) Recommended installation height: 2.5 m above the floor level Detection angle/detection coverage: 90 /12m Dimensions: mm Classification: security level 2/environment class II. In accordance with: EN , EN , EN Environment according to EN : II., general indoor It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC The parameters are the same as those of the JA-151P-WW except for the following differences: JA-151PWG is the version with a grey lens its resistence to white light significantly exceeds the values prescribed by the standard, which helps to reduce false alarms caused e.g. by car lights shining through windows, lightning or reflective items. JA-151P-WG Note: For the JA-151P-WW and JA-151P-WG, accessories such as the JA-191PL jointed bracket for JA-1x1P PIR detectors, the JA-193PL-BOX-S wall mounting box for JA-1x1P PIR motion detectors, the JA-193PL-F-S-G frame for a PIR wall mounting box small gray and the JA-193PL-F-S-W frame for a PIR wall mounting box small white are available. For more information see the Accessories chapter. 30

31 Wireless PIR motion detector with 90 photo-verification camera The detector serves for the detection of human movement in building interiors and visual alarm confirmation. The camera takes colour photos by detecting human movement while the system is set. Every picture is taken as a double exposure: the first with low resolution (LQ = pixel), the second with high resolution (HQ = pixel). JA-160PC (90) The camera is equipped with a visible flash for taking photos in the dark. The images are saved in the internal memory (micro SD card on the detector PCB) of the detector and then they are forwarded to the control panel (lower resolution). The images can be sent to an ARC and a user. The user can receive imagines automatically by SMS or . They are also available on the MyJABLOTRON Web Self Service (WSS) application which you can have on your smartphone, tablet or computer where you can browse through the images. For fast reporting the pictures are sent and displayed in LQ, however if needed, then by single click in the WSS it is possible to request HQ image too. The detector can also take a photo on command if it is required (e.g. for fire alarm confirmation) by PG output reaction or by a request sent from the WSS. The detector offers the option to send pre-alarm images. When this parameter is enabled the detector will send photos from a set section if an alarm has not been triggered yet (for example during the entrance delay). The PIR immunity level is selectable to two levels. The standard level combines a basic immunity level with a rapid reaction. The increased level provides a higher immunity but the detector reaction is slower. It occupies one position in the alarm system. Power: 2 AA 1.5 V alkaline batteries (LR6) Typical battery life: 2 years (1 activation takes 1 series of photos a day) Operational frequency: MHz Radio coverage: approx. 300 m (in an open area) Detection angle/shot range: 90 /12 m (with standard lens) Flash range: max. 3 metres Resolution of photos: LQ ; HQ pixel Classification: security level 2 / environment class II Operating temperature range: -10 to +40 C Dimensions: 110 x 60 x 55 mm In accordance with: EN , EN , EN It also meets the requirements of: ETSI EN , EN , EN 55022, EN Wireless PIR motion detector with camera The detector serves for the detection of human movement in building interiors and visual alarm confirmation. This is a variant of the JA-160PC (90) detector with a narrow viewing angle (43 ). JA-160PC Power: 2 AA 1.5 V alkaline batteries (LR6) Typical battery life: 2 years (1 activation takes 1 series of photos a day) Operational frequency: MHz Radio coverage: approx. 300 m (in an open area) Viewing angle/detection range: 43 /12 m (with standard lens) Flash range: max. 3 metres Resolution of photos: LQ ; HQ pixel Classification: security level 2 / environment class II Operating temperature range: -10 to +40 C Dimensions: 110 x 60 x 55 mm In accordance with: EN , EN , EN It also meets the requirements of: ETSI EN , EN , EN 55022, EN

32 Wireless PIR and glass break combined detector JA-180PB Wireless ceiling PIR detector JA-185P The JA-180PB combines the JA-180P PIR motion sensor with a glass-break sensor in one housing. Each sensor is enrolled to the control panel separately. The dual technology glass-break sensor reacts to air pressure changes followed by sound analysis to ensure a high immunity to false alarms. The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN. It occupies two positions in the alarm system. Power: 1 lithium battery AA 3.6 V PIR and 1 lithium battery 1/2 AA 3.6 V GBS Typical lifetime: approx 3 years Communicating protocol: MHz Radio coverage: approx. 300 m (open area) Detection range: 120 /12 m (with standard lense), 9 m GBS Dimensions: mm Security level: grade 2 according to EN , EN , EN , EN Environment according to EN : II., internal Optional lenses: corridor, curtain, pet The JA-185P is a small-size wireless PIR sensor suitable for protecting small rooms or car interiors. It is designed for wall or ceiling installations. It uses digital signal processing to avoid false alarms. It occupies one position in the alarm system. Wireless dual PIR indoor detector Power: 1 lithium battery AA 3.6 V Typical lifetime: approx 3 years Communicating protocol: MHz Radio coverage: approx. 100 m (open area) Detection range: 360 /5 m Dimensions: mm Security level: grade 2 according to EN , EN , EN Environment according to EN : II., internal Designed to detect human body movement inside buildings. Detection in two zones gives high immunity to moving pets. The battery-powered detector communicates via Jablotron radio protocol. The normal installation height is 120 cm above the floor. The detector has two detection zones each of which covers an angle of 110 and a distance of 12 m. The imaginary dividing line between both zones is determined by the detector installation height. It occupies one position in the alarm system. JA-186P Power: 1 lithium battery AA 3.6 V Typical lifetime: approx 3 years Communicating protocol: MHz Radio coverage: approx. 300 m (open area) Detection range: 110 /12 m (basic lens) Dimensions: mm Compies with standards: EN , EN , EN 55022, EN Environment according to EN : II., internal 32

33 Wireless PIR and MW combined detector The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms. When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, the detector sends an alarm report to the control panel. The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN. It occupies one position in the alarm system. JA-180W Power: 1 lithium battery AA 3.6 V Typical lifetime: approx 3 years Communicating protocol: MHz Radio coverage: approx. 300 m (open area) Detection range: 120 /12 m (basic lens) Dimensions: mm Optional lenses: corridor, curtain, pet MW detection range/mw frequency: 0.5 to 20 m/9.35 GHz Environment according to EN : II., internal Security level: grade 2 according to EN , EN , EN Wireless outdoor detectors Wireless outdoor two-zone PIR detector narrow lenses JA-157P The JA-157P wireless PIR detector with narrow angle lenses is designed for the indication of intruders in an outdoor area. It is detector by the company Optex with a detection zone width of only 5, which is very suitable for monitoring areas such as balconies, French windows, terraces etc. It is complemented by a transmitter compatible with the JABLOTRON 100 system. The detector is highly resistant to false alarms and the detection of small animals. The detector has an anti-masking function protection from blinding the optical system of the detector. It is equipped with three protective contacts (tamper), one in the detection and two in the transmission part, which immediately report opening the detector or breaking away from the fitting. It occupies one position in the system. Power supply: 1 lithium battery, type CR123A (3 V/1 500 mah) Average service life of the battery: approx. 3 years (economy mode 120 s) Operating frequency: MHz Communication range: up to 300 m (in an open area) Detection range/detection angle: Adjustable 2 or 5 m/5 Installation height: m Object movement speed: m/s Operating temperature: 20 C to +60 C Dimensions: power supply unit with transmitter mm detector mm 33

34 Wireless outdoor motion detector JA-158P The JA-158P wireless PIR detector is designed for the detection of intruders in an outdoor area. It is a detector by the company Optex, complemented by a transmitter compatible with the JABLOTRON 100 system. The optical part of the detector contains two PIR sensors with non-overlapping 94-zone optics and distinguishes itself by a high resistance to false alarms and the detection of small animals. The detector features an anti-masking function protection from view blocking and it is further equipped with two tamper contacts (front and back), which immediately report opening of the detector or breaking away from its fitting. The detector regularly performs its auto-test and reports its status through check transmissions to the system. It occupies one position in the system. Wireless outdoor motion detector Power supply: 2 (3 ) lithium battery, type CR123A (3 V/1 500 mah) Typical service life of the batteries: 2 3 V/3 3 V, approx. 3 years/4 years (120 s) Operating frequency: MHz Communication range: up to 300 mm (in an open area) Detection range/detection angle: 12 m/85 Installation height: m Object movement speed: ms -1 Environment according to EN : IV. Operating temperature range: 20 C to +60 C JA-159P The JA-159P wireless PIR detector is designed for indication of intruders in an outdoor area. It is a two-zone detector by the company Optex, complemented by a transmitter compatible with the JABLOTRON 100 system. The optical part of the detector contains two PIR sensors. It features two-zone detection with a high resistance to false alarms and small animals. The detector has an anti-masking function protection from view blocking. It is equipped with two tamper contacts (front and back), which immediately report opening of the detector or breaking away from its fitting. The detector regularly performs its auto-test and reports its status through check transmissions to the system. It occupies one position in the system. Wireless optical barrier Power supply: 2 (3 ) lithium battery, type CR123A (3 V/1 500 mah) Typical service life of the batteries: 2 3 V/3 3 V, approx. 3 years/4 years (120 s mode) Operating frequency: MHz Communication range: up to 300 mm (in an open area) Detection range/detection angle: 12 m/90 Installation height: m Operating temperature range: 20 C to +60 C Dimensions: mm JA-150IR The JA-150IR wireless IR optical barrier is designed for the indication of space intrusion by crossing the optical connecting line between the transmitter and receiver. It is a product of the company Optex, complemented by transmitters compatible with the JABLOTRON 100 system. It can be used indoor or outdoor. The detector is fitted with two-ray optics with a high resistance to false alarms. The IR barrier occupies two positions in the system. Both parts of the screen indicate tampering. The radio transmitters regularly perform their auto-test and report by check transmissions to the system. Power supply: 4 (LSH20) lithium battery, type LSH20 (3.6 V, 13 Ah) Average service life of the batteries: approx. 3 years (economy mode 120 s) Operating frequency: MHz Communication range: up to 300 m (in an open area) Distance between the units: max. 60 m Installation height: 0.7 to 1.0 m Operating temperature range: 20 C to +60 C 34

35 Wireless 4-ray optical barrier JA-151IR The optical barrier is designed for the indication of intrusion into an up to 100m corridor by the movement of a person by crossing 4 infra-red rays. They make the JA-151IR barrier highly resistant to false alarms caused by the movement of small animals, falling leaves, etc. The IR barrier is protected for outdoor installation and it is functional even under adverse climatic conditions such as rain or snowfall. Due to its very accurate optical system it requires the most careful installation by a specialized company for its reliable functioning. It is a detector of the company Optex equipped with a radio module in the receiving and transmitting part compatible with the JABLOTRON 100 system. It occupies two positions in the system. Power supply: 4 lithium battery LSH20 (3.6 V, 13 Ah) Typical service life of the batteries: approx. 3 years (with the activated 120 s economy mode) Operating frequency: MHz Communication range: about 300 m (in an open area) Detection distance: max. 100 m in an indoor environment Installation height: m Detected movement speed: adjustable Detector protection: environment class IV., in accordance with EN , outdoor environment Operating temperature range: 20 C to +60 C Wireless perimeter protection detectors Mini wireless magnetic detector The JA-151M(B) is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations. It is powered with a lithium battery type CR2032. It occupies one position in the alarm system. JA-151M JA-151MB Power: lithium battery CR2032 (3 V, 220 mah) Typical lifetime: approx. 2 years for maximum 100 activations per day Communicating protocol: MHz Radio coverage: up to 100 m (in an open area) Detector dimensions: mm Magnet dimensions: mm Security level: grade 2 according to EN , EN , EN Environment according to EN : II., internal 35

36 Wireless magnetic detector The JA-150M(B) detector is designed to detect the opening of a window or door. It allows two basic behaviour responses: status or pulse responses to opening. It also includes two input terminals IN1 and IN2. Alternative wired opening detectors, a flood detector or a shutter sensor can be connected to these input terminals. It occupies two positions in the alarm system. JA-150M Power: 1 alkaline battery (1.5 V) Typical lifetime: 2 years Operating frequency: MHz Communication range: about 300 meters (open area) Security level: grade 2 according to EN , EN , EN Environment according to EN : II., general indoor Dimensions: mm JA-150MB Wireless magnetic detector smaller design JA-183M JA-183MB The JA-183M(B) offers a conveniently small size and great door detector features. It is designed to detect doors or windows opening. The door opening detector reacts to the removal of its magnet unit. It can trigger an instant or delayed intruder alarm. It is addressable and occupies one position in the alarm. Wireless invisible magnetic detector Power: Lithium battery type CR-123A (3.0 V 1.5 Ah) Please note: Battery is not included Typical battery life: about 3 years (max. 20 activations per day) Communication band: MHz, Jablotron protocol Communication range: 300m (open area) Dimensions: transmitter part mm magnet A mm magnet B 10 4 mm Environment according to EN : II., general indoor Classification: grade 2 according to EN , EN , EN Complies with: ETSI EN , EN , EN 55022, EN Can be operated to: ERC REC The JA-182M is designed for the detection of windows or doors opening. An invisible magnetic sensor is installed into plastic or wooden window frames and is therefore totally discreet. The detector is suitable for use with the majority of manufactured windows. Some types of metal work are already prepared for the installation of this detector. It occupies one position in the alarm system. JA-182M Power: 2 lithium battery type CR2354 (3 V) Typical lifetime: approx. 3 years Communicating protocol: MHz Radio coverage: approx. 200 m (open area) Dimensions: mm Security level: grade 2 according to EN , EN , EN

37 Wireless shock or tilt detector JA-182SH The detector s operation is controlled by two modes. The shock (vibration) detection mode monitors doors, windows, light partitions etc. indicating attempts at their overcoming by rough force. The tilt detection mode on the other hand detects the unauthorised handling of a valuable object. The detector uses a triple-axis semiconductor accelerometer with a digital output. Digital signal processing guarantees a high resistance to false alarms. The detector is powered by a battery and occupies a single position in the security system. Power: lithium battery type CR-123A, 3 V, mah Detected tilt (depending on setting): Typical battery life: circa 2 years (for max. 20 activations a day in the power save mode) Operating frequency: MHz Communication range: circa 300 m (direct visibility) Dimensions: mm Environment according to EN : II., general indoor Operational temperature range: 10 C to +40 C Security level: grade 2 according to EN , EN , EN Complies with standards: ETSI EN , EN , EN 55022, EN Wireless handle lock with magnetic detector A wireless module for PG outputs integrated into a mechanical lock that can be used to lock a door or window handle when the premises alarm is set. An integrated magnetic sensor allows you to monitor the closing status of a window or door. The lock offers a selectable function for automatic unlocking if a fire alarm is triggered. JA-152NM The magnetic sensor in this module only provides information about the status of the window or door; it does not detect intrusion into the building (The product is not certified as a fully electronic security detector). Before the installation of the module, suitability for particular mounting should be verified with regard to the window frame or the handle. To ensure proper functioning of the handle lock the handle must be capable of being fully turned to the closed position. A window or door handle cannot be locked in the micro ventilation or full ventilation position. The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system. Compatible with: F-Link and higher Power supply: 2 AA alkaline batteries (LR6) 1.5 V mah Warning: Batteries are not included in the product package. Typical battery service life: approx. 2 years (1 locking/unlocking a day) Communication band: MHz, JABLOTRON protocol Communication range: approx. 300 m (free terrain) Dimensions: mm Environment according to EN : II., general indoor Operating temperature range: 20 C to +60 C It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC U14K Window handle for JA-152NM mounting - white The LONDON window handle in a basic white design is an accessory of the JA-152NM product. The shape of its base exactly fits the hole in the handle s window lock. Square adapter 7/8 1 20mm and 1 30mm included in the package of the JA-152NM. 37

38 Wireless glass-break detector JA-180B Designed to detect window breaking for residential and commercial interior installations. The glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass-breaking. It uses digital signal processing to avoid false alarms. It occupies one position in the alarm system. Power: 1 lithium battery AA 3.6 V Typical lifetime: approx 2 years Communicating protocol: MHz Radio coverage: approx. 100 m (open area) Detection range: 9 m Dimensions: mm Security level: grade 2 according to EN , EN , EN Wireless ceiling glass-break detector A small-size glass-break sensor that detects window breaking. It is designed for building interior installations. It uses the analysis of air pressure variations combined with the characteristic sound of glass-breaking. It uses digital signal processing to avoid false alarms. It is addressable and occupies one position in the alarm. JA-185B Power: Lithium battery type LS (T) (3.6 AA/2.4 Ah) Please note: Battery is not included Typical battery life: about 3 years Communication band: MHz, Jablotron protocol Communication range: 100m (open area) Detection range: to 9 m Environment according to: EN : II., general indoor Security: grade 2 according to EN , CLC/TS , EN Dimensions, weight: mm, 60 g Complies with: ETSI EN , EN , EN55022, EN Can be operated to: ERC REC Wireless environmental detectors Wireless fire and temperature detector The JA-150ST optical wireless smoke and temperature detector detects fire inside residential or commercial premises. It allows these settings: smoke and heat, smoke or heat, smoke only, heat only. It has an alarm memory function where the LED still lights after the alarm state is over. It is battery powered by alkaline batteries. It occupies one position in the alarm system. JA-150ST Power: 3 alkaline batteries AA 1.5 V Typical lifetime: 3 years Communication protocol: MHz Communication range: approx. 300 m (in an open area) Fire detection: optical and heat Fire detection sensitivity: m = db/m by EN 54-7 Temperature detection: class A2 EN-54-5 Alarm temperature: +60 C to +70 C Dimensions: diameter 126 mm, height 50 mm Operating temperature range: 10 C to +80 C 38

39 Wireless combined smoke and temperature detector JA-151ST Test spray Smoke Sabre The JA-151ST is unique wireless fire detector certified according to EN 14604, EN 54-5, EN 54-7 and EN standards. It contains two separate detectors an optical smoke detector and a temperature detector detecting fire or increased temperature in residential and commercial buildings. The detector allows you to set various detection options: smoke and elevated temperature, smoke or elevated temperature, only smoke or only elevated temperature. The detector indicates a dangerous situation optically with an integrated lamp and with an acoustic signal. It occupies one position in the security system. Power supply: 3 alkaline batteries AA 1.5 V Typical service life of the batteries: approx. 3 years Smoke detection: optical diffusion of light Smoke detector sensitivity: m = db/m in accordance with EN 14604, EN 54-7 Temperature detection: class A1 in accordance with EN 54-5 Alarm temperature: +60 C to +65 C Operating frequency: MHz Communication range: approx. 300 mm (in an open area) Dimensions: diameter 126 mm, height 50 mm Operating temperature range: 10 C to +70 C Complies with standards: EN 54-2 Smoke Sabre Test Spray is designed to test the functionality of Jablotron s optical smoke detectors. Contains 150 ml of testing aerosol. SD-TESTER Wireless temperature sensor JA-151TH The JA-151TH is a wireless temperature detector for measuring the current temperature. The measured data is forwarded via the control panel to the MyJABLOTRON application. MyJABLOTRON can control the heating via a programmable (PG) output of control panel based on measured temperature. The MyJABLOTRON app can send SMS or reports about undershooting / overshooting the set temperature and can chart the change in temperature for the selected time period. Power: 1 CR2032 lithium battery (3 V, 220 mah) Typical battery life: 2 years at 20 C Operating frequency: MHz Dimensions: 55 x 27 x 16 mm Range of measured temperatures: -20 C to +60 C Operating temperature range: -20 C to +60 C Measurement accuracy in the range of operating temperatures: ± 0.1 C It also meets the requirements of: EN , EN

40 Wireless gas-leak detector JA-180G The JA-180G gas-leak detector serves to indicate the leaking of explosive gases (Natural gas, Methane, Propane, Butane). When activated the detector sets off the fire alarm and sounds a built-in siren. Its relay output can be used for example to shut down the gas inlet by means of a suitable electric gas valve. The detector performs regular self-testing. It occupies one position in the alarm system. Power: 230 V, 50 Hz, 2 W Communication protocol: MHz Radio coverage: approx. 200 m (open area) Gas detection: hot platinum filament Coverage area: 50 m 3 Sensitivity: optional 10 or 20 % LEL Relay output: dry relay switchover contact max. 5 A/230 V AC Acoustic power of the built-in siren: 94 db/0.3 m Dimensions: mm Complies with standards: EN , ETSI EN , EN 60950, EN , EN Stand-alone CO gas detector, stand-alone CO gas detector with a display Used for the detection of CO gas (carbon monoxide) giving a timely warning of harmful effects to human health. The detector is certified for installation in the interiors of buildings, caravans and boats. The detectors indicate dangerous concentrations of carbon monoxide (CO) acoustically and optically with a signal lamp and in the case of the EI208DW type by displaying the concentration on screen as well. The detector is powered by an integrated lithium battery that powers it throughout its service life. EI208W EI208DW Service life of the detector: 7 years (expiration is indicated on the label) Power supply: integrated non-replaceable lithium battery Typical battery life: throughout the detector s service life Humidity: 15 to 95 % (without condensation) Dimensions: mm Weight: 170 g Complies with standards: EN , EN , EN JA-150G-CO Wireless module for connection of an Ei208W(D) CO detector This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its wireless connection to the JABLOTRON 100 system. It transmits information about an alarm, detector activation and detector battery status to the system. It occupies one position in the system. JA-150G-CO Power supply: EI 208W(D) battery Communication band: MHz Communication range: approx. 300 m (in an open area) Dimensions: mm Environment according to EN : II., general indoor In conformity with: ETSI EN , EN , EN 55022, EN , EN

41 Test spray for CO detectors Designed for testing the functionality of EI208W and EI208DW CO detectors. Supplied in a kit with application sleeves that prevent undesired dispersion of the test aerosol outside the detector space. The content of the spray can is sufficient for approx. 50 test doses. SOLO C3 Wireless indoor thermostat Designed to measure and control the indoor temperature. The thermostat expands the application range of the JABLOTRON 100 system in the domain of home automation with simple zone control. For switching the heating, standard control panel programmable outputs are used. JA-150TP Power supply: 2 AA alkaline batteries (LR6) 1.5 V 2400 mah Warning: Batteries are not included in the product package. Typical service life: 2 years Communication band: MHz, JABLOTRON protocol Communication range: approx. 300 m (free terrain) Recommended installation height: 1.5 m above floor level Operating temperature range: -10 to +70 C Measurement accuracy in the range of operating temperatures: 0.1 C It also meets the requirements of: EN , EN Dimensions: 66 x 90 x 22 mm Wireless module for the impulse output of an electric meter JA-150EM-DIN The module for DIN-rail installation is designed to display electric meter readings, which is available for customers via the MyJablotron Web Self-Service. The module contains a radio transmitter designed for the wireless transfer of information from the electric meter via the control panel to the MyJablotron portal. The impulse converter is directly supplied from the mains and it contains galvanically separated circuits for 4 kv. The converter is designed for connection to a standard impulse output of an SO electric meter. It can distinguish two rates (it can be connected to the rate control line of the load management system). It also has an independent input that can be used e.g. to monitor opening of the switchboard cover. Power supply: 230 V/50 Hz, device of protection class II. Internal power consumption: approx. 0.1 W Operating frequency: MHz Communication range: approx. 300 m (line of sight) IN input: low-voltage, galvanically separated from the mains operating voltage 5 V max. external voltage surge 30 V DC max. connection conductor length 3 m PU input: low-voltage, galvanically separated from the mains operating voltage 5 V max. external voltage surge 30 V DC max. connection conductor length 3 m it is compatible with the impulse output of SO electric meters of class B in accordance with EN TA input: input for the connection of load management control conductor, max. 230 V AC Dimensions: mm, 1 DIN module Working environment: outdoor, protected, 20 C to +60 C Ingress protection class: front panel IP 40 to EN Complies with standards: ETSI EN , EN , EN and EN

42 Wireless sirens Two way wireless internal siren JA-150A The JA-150A wireless internal siren is designed to sound alarms, exit and entrance delays or to indicate other activations in the alarm system. The siren is equipped with a button with programmable reactions. It occupies one position in the alarm system. Power: 230 V, 50 Hz Communication protocol: 2 way Jablotron wireless protocol MHz Backup-battery: 3.6 V NiCD up to 170 mah for 24 hours Maximum recharge time: 72 hours, 10 ma Maximum standby consumption: 0.3 W at 230 V AC Communication range: approx. 300 m (in an open area) Security level: grade 2 according to EN , EN , EN Environment according to EN : II., internal Dimensions: mm Indoor wireless siren for electrical sockets The JA-162A siren is designed to indicate alarms inside a building It can also be used for other acoustic indications such as the activation of PG outputs, entry/exit delays or as a door bell. By pressing of the siren button an alarm can be silenced or an emergency alarm can be released (optional function). The siren is equipped with a backup battery in case of a power supply failure. The siren is equipped with a tamper sensor for the detection of unplugging. The siren is addressable and it occupies one position in the system. JA-162A Power supply: 230 V/50 Hz, 1 W, protection class II. Battery/service life: 3.6 V; 170 mah/3 years Operating frequency: MHz Communication range: approx. 100 m (line of sight) Sounds (melodies): 8 selectable for PG indication Alarm siren sound: 90 db/1 m Dimensions: mm Ingress protection class: IP 40 in accordance with EN Environment according to EN : II., general indoor Operational temperature range: 10 C to +40 C Security level: grade 2 according to EN , EN , EN Complies with standards: ETSI EN , EN , EN 55022, EN

43 Wireless outdoor siren The JA-111A RB BUS siren is designed for the acoustic indication of alarms and the activation and deactivation of PG outputs in a security system. The siren communicates via the BUS of the control panel and is powered by it. It has an implemented energy saving function in the case of a power supply failure as well as an integrated spirit level for accurate and precise setup. It occupies one position in the alarm system. Alternative covers are available for the siren in a stainless-steel or plastic design in white or grey. Covers are offered in designs with a red or blue signal. It is addressable and it occupies one position in the alarm system. JA-151A BASE-RB Voltage: 12 V DC adapter Operating frequency: bidirectional Jablotron MHz protocol Backup battery: 4.8 V NiCaD up to mah, for 24 hours Battery recharging time: max. 72 hours Maximum standby consumption: 50 ma from a DC adapter Communication range: approx. 300 m (in an open area) Security level: grade 2 according to EN , EN , EN Environment according to EN : IV., outdoor, IP 34D Operating temperature range: 52 C to +60 C Dimensions: mm JA-1X1A-C-WH JA-1X1A-C-WH-B JA-1X1A-C-GR JA-1X1A-C-GR-B JA-1X1A-C-ST JA-1X1A-C-ST-B Wireless outdoor battery powered siren The JA-163A RB siren is a component of the JABLOTRON 100 system. It is used to indicate alarms outdoors and for supplementary acoustic indication. The siren is powered by a lithium battery, completely without the need of any external power supply. The siren consists of a JA-163A-BASE-RB base with the electronic components, a BAT-100A lithium battery and a top enclosure of the JA-1X1A-C-xx series. The enclosures are supplied in several colour designs. It occupies one position in the system. The components of the JA-163A RB product (base, top enclosure and battery) are supplied separately. The reason is free selection from a number of top enclosures and the transport conditions of the battery. JA-163A RB JA-163A-BASE-RB bottom part with electronics JA-1X1A-C-ST stainless steel cover JA-1X1A-C-ST-B stainless steel cover JA-1X1A-C-WH plastic cover white JA-1X1A-C-WH-B plastic cover white JA-1X1A-C-GR plastic cover gray JA-1X1A-C-GR-B plastic cover gray Power supply: Lithium battery 3.6 V/13 Ah Type BAT-100A (up to 2 pieces can be fitted) Typical battery life: approx. 5 years (with default settings) Operating frequency: MHz Communication range: approx. 300 m (in an open area) Antenna: internal (an AN-868 external antenna can be connected) Piezoelectric siren: 110 db/m (value with a new battery) Dimensions: mm (with enclosure) Classification according to: EN , EN , class 2 Environment according to EN : IV., general outdoor Operating temperature range: 25 C to +60 C Ingress protection class: IP 44 In conformity with: ETSI EN , EN , EN 55022, EN JA-1X1A-C-WH JA-1X1A-C-WH-B JA-1X1A-C-GR JA-1X1A-C-GR-B JA-1X1A-C-ST JA-1X1A-C-ST-B 43

44 Remote controls Bi-directional two-button keyfob/four-button keyfob It enables the remote control of the security system, plus various electric appliances, or triggering an emergency alarm. Confirmation of the execution of a command through optical and acoustic feedback. All this also with multiple JABLOTRON 100 systems (e.g. at home and in the office). The remote control can also be enrolled to a multi-functional relay of the AC-16x type to control the relay in accordance with the selected mode. JA-152J MS JA-154J MS The control is equipped with both the optical and acoustic indication of the execution of a command. The control can be enrolled to multiple systems or multi-functional relays. It checks the status of its battery and indicates its being empty. If a key is pressed and held continuously, an activation is sent every second. This function can be used e.g. to extend the impulse of a PG output (e.g. the gradual closing of roller blinds). The sound of the keys can be switched off. Key lock function. Extended settings for double pressing the keys. The control is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system. Compatible with: FW of the LJ(MD)60416 control panel; F-Link Power supply: Lithium battery type CR 2032 (3.0 V/0.2 A), C type power supply in accordance with EN Typical service life of the battery: approx. 2 years (10 activations/day) Communication frequency: MHz Communication range: about 300 meters (line of sight) Dimensions: JA-152J MS mm JA-154J MS mm Classification: security level 2, ACE type B, in accordance with EN , EN , T031 Environment according to EN : II., general indoor It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC

45 One-way two-button keyfob/four-button keyfob In enables the remote control of the security system, plus various electric appliances, or the triggering of an emergency alarm (without optical and acoustic feedback of the execution of a command). The remote control can also be enrolled to multiple systems and to a multi-functional relay of the AC-16x type to control the relay in accordance with the selected mode. JA-162J JA-164J The remote control is equipped with both optical and acoustic indication of pressing a key. It is possible to enroll it to multiple systems or multifunctional relays. It checks the status of its battery and indicates its being empty. If a key is pressed and held continuously, an activation is sent every second. This function can be used e.g. to extend the impulse of a PG output (e.g. the gradual closing of roller blinds) The sound of the keys can be switched off. Key lock function. Extended settings for double pressing the keys. The remote control is a device of the JABLOTRON 100 system, is addressable and occupies one position. Wireless control Compatible with: FW of the LJ(MD)60416 control panel; F-Link Power supply: Lithium battery type CR 2032 (3.0 V/0.2 A), C type power supply in accordance with EN Typical service life of the battery: approx. 2 years (10 activations/day) Communication frequency: MHz Communication range: about 300 meters (line of sight) Dimensions: JA-162J mm JA-164J mm Classification: security level 2, ACE type B, in accordance with: EN , EN Environment according to EN : II., general indoor It also meets the requirements of: ETSI EN , EN , EN 55022, EN Operation conditions: ERC REC JA-182J Remote control for car The JA-182J remote control serves for the remote setting/unsetting of the system, the activation of panic alarms and the control of other devices. The key fob is equipped with a practical inbuilt function of a child lock preventing the unauthorised activation of a command. If the function is on, to activate the device it is necessary to press the button twice within 1 second. A double push activates a panic alarm. It occupies one position in the alarm system. Power: lithium battery CR2032 (3 V, 220 mah) Typical lifetime: approx 2 years Operating frequency: MHz Communication range: about 30 m (open area) Dimensions: mm Complies with standards: ETSI EN , EN 55022, EN , EN , EN Security level: grade 2 according to EN , EN This module is designed for car installation and to control devices (for example garage doors, parking entrance gates). It is powered by 12 V or 24 V from the car. It can also be used for panic alarm transmission from a car to a home security system. It occupies one position in the alarm system. JA-185J Power: V DC ± 30 % Communicating protocol: MHz Radio coverage: 50 m (open area) Consumption: 0/20 ma (only during activation) Dimensions: mm 45

46 Wireless wrist button JA-187J Wireless panic button JA-188J Wireless door bell button The JA-187J panic button can remotely activate an emergency alarm or operate different devices. It is used mainly for the personal calling for help. The button can be worn like a wrist watch or around the neck on a cord. It is powered by battery. It occupies one position in the alarm system. Power: lithium battery type CR 2032 (3 V) Typical lifetime: approx 3 years Communicating protocol: MHz Radio coverage: approx. 50 m (open area) Environment: saved outside Enclosure protection: IP 44 Operating temperature range: 25 C to +50 C The JA-188J is mainly used as a wireless panic or emergency button. It is designed to be a remote control for setting/unsetting an alarm system or remotely controlling other appliances. It provides tamper contacts and monitors the voltage of its battery. The systém reaction to button activation is optional. The basic reaction is a panic alarm or setting/ unsetting the system (selectable). Other reactions can be chosen in control panel service mode. It occupies one position in the alarm system. Power: lithium battery type LS14250 (3,6 V) Typical lifetime: approx 3 years Communicating protocol: MHz Radio coverage: approx. 300 m (open area) Dimensions: mm Security level: grade 2 according to EN , EN JA-189J The JA-189J works mainly as a doorbell button. The JA-189J can also be enrolled to the control panel as a hidden panic button or to operate PG outputs. It occupies one position in the alarm system. Power: alkaline battery type L1016 (6 V) Typical lifetime: approx 2 years Communicating protocol: MHz Radio coverage: approx. 50 m (open area) Environment external, protected Enclosure protection IP 41 Dimensions: mm Complies with standards: ETSI EN , EN 55022, EN , EN , EN Operating temperature range: 25 C to +50 C 46

47 RFID entry key tag An access tag to the JABLOTRON 100 system. JA-194J-RE Communication standard: EM 125 khz Addressed directly to the JABLOTRON 100 system JA-194J-BK JA-195J JA-192J RFID access card for JABLOTRON 100 JA-190J RFID access card for the JABLOTRON 100 system. 125 khz Addressed directly to the JABLOTRON 100 system RFID card and key tag reader for PC (connected by USB) RFID card and tag readers designed to easily enroll the JA-190J and JA-191J to the JA-100 system by using F-Link SW. JA-190T USB RFID reader for JA-190J and JA-191J 47

48 Output modules Wireless signal output module PG JA-150N The JA-150N is a wireless PG power output module (16 A/230 V AC). It copies the state of a selected PG output in the JABLOTRON 100 system (PG1 to PG 32). A particular PG output is addressed on the PCB board by using 5 DIP switches. This module does not occupy any postion in the system. Wireless signal output module PG JA-151N Power: 230 V/50 Hz; 1.5 W PG output: output terminals (C, NO, NC) Output relay load: max. 16 A /250 V Environment according to EN : II., internal The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100 system (PG 1 to PG 32). A particular PG output is addressed on the PCB board by using 5 DIP switches. This module does not occupy any postion in the JABLOTRON 100 system. Power: 12 V DC Output relay load: max. 2 A/60 V (min. 10 ma) PG output: terminals C, NC, NO Environment according to EN : II., internal Wireless multifunctional relay for DIN-rail installation AC-160-DIN The wireless multifunctional relay is a component of the JABLOTRON 100 system, but it can be equally installed as a stand-alone device without a link to a control panel. It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system. Power supply: ~ 230 V/50 Hz, protective class II. Internal power consumption: 0.4 W/max. 1.5 W Loading capacity of the power relay contacts: (galvanically isolated from the control terminals) protection class II. Max. switched voltage: 250 V AC/24 V DC Resistance load (cosφ=1): max. 16 A Inductive, capacitive loads (cosφ=0.4): max. 8 A Halogen lighting: max W Minimum switched DC power: 0.5 W Wire cross section: max mm 2 ; max mm 2 Dimensions: mm, 1 DIN module Environment according to EN : II., general indoor Ingress protection class: IP 20, IP 40 for the front panel (EN 60529) In conformity with: ETSI EN , EN , EN , EN

49 Mounting-box-fitted wireless multifunctional power relay AC-160-C The wireless multifunctional power relay is a component of the JABLOTRON 100 system. Enrolled to the control panel, the relay copies selected PG outputs. The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic safety separation for switching 230 V/16 A power loads. In the system it occupies one position. Rated supply voltage: V, Hz Internal power consumption: at 230 V AC (min/max): 0.2 W/0.7 W Operating frequency: MHz Antenna: internal Max. switched voltage: 250 V AC Resistance load (cosφ=1): max. 16 A Contact load capacity: protection class II. Inductive, capacitive load (cosφ=0.4): max. 8 A Halogen lighting: max W Minimum switched DC power: 0.5 W Diameter of connected conductors: max mm 2 ; max mm 2 Ingress protection class: IP 20 Dimensions: mm, RH 75 % non-condensing In conformity with: ETSI EN , EN , EN 55022, EN

50 SOFTWARE F-Link F-Link SW is designed for the professional programing of the JABLOTRON 100 system. It offers step-by-step installation and programing procedures. It allows you to follow all the needed steps for PROGRAMMING the JABLOTRON 100 system properly as follows: setting of sections zone mapping to sections zone and code management internal setting of devices programming of PG outputs calendar programming ARC management report settings F-Link SW also allows FW UPGRADES for BUS and two-way wireless devices. For installers there are the DIAGNOSTIC tools. Diagnostics offers a quick overview of the installation. This helps the installer to better analyze current situations occurring in the alarm system (e.g. the voltage of BUS devices, the current battery capacity of wireless devices, radio signal levels and more) By using F-Link SW the installer is able to VIEW the HISTORY of all events recorded on the SD card. This function is also supported by advanced filtering to easily find any needed event in the history. It is connected to the control panel by a standard USB-B cable or remotely via the Internet. J-Link J-Link SW is designed for the end user of the JABLOTRON 100 system. It allows management of the system for the user using the options: View history Management of user codes and RFID tags Calendar event programing System diagnostics It is connected to the control panel by a standard USB-B cable or remotely via the Internet. 50

51 MyJABLOTRON A unique application that allows online remote operation of a Jablotron system. Available for free to end users and installation partners. MyJABLOTRON The MyJABLOTRON application is designed for end users, who will now be able to control and remotely operate their Jablotron devices in a comfortable and intuitive environment. MyJABLOTRON allows you to: determine the current status of the system set/unset an alarm or some parts of it activate free alerts for sudden or selected events via SMS, or Push notifications remotely control appliances and equipment in a premises (blinds, gates, irrigation, heating, etc.) display the system events memory visually inspect an area and images from motion detector cameras display the current temperature and a history chart, as well as to set the monitoring and alerting of low and high temperature limit crossings monitor electricity consumption and differentiate between low and high tariffs, and to display a graph of historical measurements monitor vehicles, as well as keeping a journey log The application is accessible via smart phones and Web browsers. MyCOMPANY The MyCOMPANY application is part of the MyJABLOTRON application, designed for installation partners, offering them easy access to manage all completed installations. MyCOMPANY allows you: to view the current status and make changes to installation settings to scan in a registration code or serial number (available for mobile version) the rapid creation of a professional offer the simple downloading of marketing and information materials in the appropriate language, such as manuals, presentations, offline webinars and new innovations campaigns (available via web version) to upload complaints with all the details and any photographs The application is available via smart phones and Web browsers. 51