IEC PROJETOS EM VOTAÇÃO. IEC Ed.4: Railway applications - Traction transformers and inductors on board rolling stock

Transcription

1 IEC PROJETOS EM VOTAÇÃO IEC/TC 9 - Electrical equipment and systems for railways Até 11 de Abril de 2014 IEC Ed.4: Railway applications - Traction transformers and inductors on board rolling stock Questionnaire on IEC Ed.1, Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line IEC Ed.4: Railway applications - Traction transformers and inductors on board rolling stock IEC Ed.3: Railway Applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service IEC/TC 17 - Switchgear and controlgear Até 25 de Abril de IEC/IEEE Ed.1: High-voltage switchgear and controlgear - Part : Alternating current generator circuit-breakers IEC/TC 18 - Electrical installations of ships and of mobile and fixed offshore units Até 14 de Março de IEC : Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications IEC/TC 21 - Secondary cells and batteries Até 14 de Março de IEC : Safety requirements for secondary batteries and battery installations - Part 4: Valve regulated lead acid batteries for use in portable appliances IEC : Safety requirements for secondary batteries and battery installations - Part 1: general safety information IEC/TC 23 - Electrical accessories

2 Até 07 de março de IEC Ed.1: In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) IEC Ed.2: Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation IEC/TC 59 - Performance of household and similar electrical appliances IEC Ed.2: Vacuum cleaners for household use - Part 2: Wet carpet cleaning appliances - Methods for measuring the performance IEC/TC 61 - Safety of household and similar electrical appliances IEC A1/Ed3: Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use IEC /Ed3: Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans IEC A2/Ed3: Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances IEC /A2/Ed3: Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines IEC /A2/Ed2: Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines IEC /A2/Ed2: Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers IEC /A2/Ed7: Household and similar appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers IEC /A1/Ed5: Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors

3 IEC /A2/Ed2: Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor IEC/TC 62 - Electrical equipment in medical practice IEC : Medical devices - Part 1: Application of usability engineering to medical devices Amendment 1 to IEC : Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment Amendment 1 to IEC : Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy IEC : Small bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications IEC/TC 65 - Industrial-process measurement, control and automation Até 14 de Março de 2014 IEC Ed. 2.0: Representation of process control engineering - Request in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools IEC x Field Device Tool (FDT) Interface Specification - Part 30x: Communication Profile Integration - IEC CPF x IEC /Ed.1: Security for industrial automation and control systems - Network and system security - Part 2-4: Requirements for IACS solution suppliers. IEC Ed Field Device Integration (FDI) - Part 1: Overview IEC Ed Field Device Integration (FDI) - Part 2: FDI Client IEC Ed Field Device Integration (FDI) - Profiles - Part 101-1: Foundation Fieldbus H1

4 IEC Ed Field Device Integration (FDI) - Profiles - Part 101-2: Foundation Fieldbus HSE IEC Ed Field Device Integration (FDI) - Profiles - Part 103-1: PROFIBUS IEC Ed Field Device Integration (FDI) - Profiles - Part 103-4: PROFINET IEC Ed Field Device Integration (FDI) - Profiles - Part 109-1: HART and WirelessHART IEC Ed Function blocks (FB) for process control - Part 4: EDD interpretation IEC Ed OPC Unified Architecture - Part 3: Address Space Model IEC Ed OPC Unified Architecture - Part 4: Services IEC Ed OPC Unified Architecture - Part 5: Information Model IEC Ed OPC Unified Architecture - Part 6: Mappings IEC Ed OPC Unified Architecture - Part 7: Profiles IEC Ed OPC Unified Architecture - Part 13: Aggregates IEC Ed OPC Unified Architecture - Part 11: Historical Access IEC Ed OPC Unified Architecture - Part 8: Data Access IEC Ed OPC Unified Architecture - Part 9: Alarms and conditions IEC Ed OPC Unified Architecture - Part 10:Programs IEC/TC 77 - Electromagnetic compatibility IEC : Electromagnetic Compatibility (EMC) - Part 4-30: Testing and measurement techniques -Power quality measurement methods IEC/TC 82 - Solar photovoltaic energy systems Até 11 de Abril de 2014 IEC Ed.3: Photovoltaic devices - Part 2: Requirements for reference solar devices

5 IEC Ed.1: Transportation testing of photovoltaic (PV) modules - Part 1: Transportation and shipping of PV module stacks Até 25 de Abril de IEC Ed.1: Concentrator photovoltaic (CPV) performance testing - Part 2: Energy measurement IEC/TC 86 - Fibre optics IEC /Ed2: Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry IEC /Ed2: Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling IEC /Ed2: Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement Até 25 de Abril de IEC /Ed3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator IEC /Ed1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Gauge pin withdrawal force for rectangular ferrule multi-fibre connectors IEC /Ed1: Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments IEC/TC Audio, video and multimedia systems and equipment IEC /Ed. 1/Amd.1: cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring - Physical (PHY) layer specification IEC/TC Safety of motor-operated electric tools

6 IEC Ed. 1.0: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders