NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date

Transcription

1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date 22G/370/CD IEC ED3: Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy 22G/371/CD IEC ED2: Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustables speed d.c. power drive systems 22G/372/CD IEC ED3: Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems 23E/1041/CD IEC /AMD1 ED2: Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation 61/5591/FDIS IEC /AMD1 ED6: Amendment 1: Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers 62A/1230/CD ISO TR ED2: Medical devices -- Guidance on the application of ISO A/1231/CD ISO ED3: Medical devices - Application of risk management to medical devices 64/2240A/CDV IEC /AMD3/FRAG2 ED3: Amendment 3 (f2) - Low-Voltage electrical installations - Part 5-53: Selection and erection of electrical equipments - Isolation, switching and control 64/2248/FDIS IEC ED2: Low-voltage electrical installations - Part 7-711, Requirements for special installations or locations - Exhibitions, shows and stands 72/1112A/FDIS IEC /AMD1 ED4: Amendment 1: Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control 79/601/FDIS IEC ED1: Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) 82/1372/CD IEC TS ED1: Recommendations for renewable energy and hybrid systems for rural electrification - Part 7-4: Generators - Integration of solar with other forms of power generation within hybrid power systems 82/1373/CD IEC TS ED1: Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-7: Selection of inverters 86C/1499/CD IEC ED1: Fibre optic active components and devices Performance standards Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface 86C/1500/CD IEC ED3: Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems 100/3023/CD IEC ED2: Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of colour gamut (Gamut ID) 14/946/CD IEC ED1: Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors 17C/674/CD IEC ED1: High-voltage switchgear and controlgear - Part 213: Voltage detecting and indicating system Page 1 of 6

2 21/953/CD IEC ED1: Lead-acid starter batteries - Part 7: General requirements and methods of test for motorcycle batteries 23E/1042/FDIS IEC ED1: Residual Direct Current Detecting Device (RDC-DD) to be used for Mode 3 charging of Electric Vehicle 23G/393/FDIS IEC ED3: Electrical accessories - Cord sets and interconnection cord sets 23H/389B/CD IEC ED4: Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements 28/255/FDIS IEC ED4: Insulation co-ordination - Part 2: Application guidelines 32B/675/CD IEC ED1: Low-voltage fuses - Part 7: Fuse links for the protection of batteries 34/476/FDIS IEC 62504/AMD1 ED1: Amendment 1 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions 34A/2051/FDIS IEC ED4: Metal halide lamps - Performance specification 35/1386/CD IEC ED13: Primary batteries - Part 1: General 35/1387/CD IEC ED14: Primary batteries - Part 2: Physical and electrical specifications 47/2450/FDIS IEC ED1: Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of wireless power transmission using resonance for automotive vehicles sensors 47A/1035/CDV IEC ED1: Integrated circuits - Three dimensional integrated circuits - Part 1: General conditions and definitions 47A/1036/CDV IEC ED1: Integrated circuits - Three dimensional integrated circuits - Part 2: Alignment of stacked dies having fine pitch interconnect 47A/1039/CD IEC ED1: EMC IC modelling Part 6: Models of integrated circuits for immunity behavioural simulation - Conducted Pulse Immunity (ICIM-CPI) 47D/900/FDIS IEC /FRAG70 ED1: Amendment 20 - Mechanical standardization of semiconductor devices - Part 2: Dimensions 47F/303/CD IEC ED1: Semiconductor devices Micro-electromechanical devices Part 35: Standard test procedure for the anti-failure robustness of flexible or foldable electro-mechanical devices against bending deformation /1267/CD 49/1268/CD 55/1634/FDIS 55/1635/FDIS 57/1936/CDV 57/1947/FDIS IEC TS ED3: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal IEC TS ED3: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices IEC ED1: Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200 IEC ED1: Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 IEC ED1: Framework for energy market communications - Part 503: Market data exchanges guidelines for the IEC profile IEC ED2: Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets Page 2 of 6

3 61/5555/CDV IEC ED8: Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines 61/5556/CDV IEC ED7: Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances 61/5559/CDV IEC ED8: Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers 61/5560/CDV IEC /AMD1 ED6: Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines 61/5561/CDV IEC /AMD2 ED6: Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids 61/5562/CDV IEC /AMD2 ED3: Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances 61/5563/CDV IEC /AMD1 ED6: Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters 61/5564/CDV IEC /AMD1 ED5: Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers 61/5565/CDV IEC /AMD2 ED5: Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors 61/5566/CDV IEC /AMD2 ED4: Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam 61/5567/CDV IEC /AMD2 ED3: Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines 61/5568/CDV IEC /AMD2 ED6: Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances 61/5569/CDV IEC /AMD1 ED6: Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care 61H/362/FDIS IEC /AMD1 ED3: Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning equipment 62B/1072/CDV IEC ED1: Methods for calculating Size Specific Dose Estimate (SSDE) on Computed Tomography 65B/1103/CDV IEC ED2: Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors 69/548/FDIS ISO ED1: Road Vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test 69/549/FDIS ISO ED1: Road vehicles - Vehicles to grid communication interface - Part 5: Physical and data link layer conformance tests 82/1360/CDV IEC ED1: Measurement procedures for materials used in photovoltaic modules Part 1-7: Test procedure for the optical durability of transparent polymeric PV packaging materials 110/936/FDIS IEC ED1: Liquid crystal display devices - Part 40-5: Mechanical testing of display cover glass for mobile devices - Strength against dynamic impact by a sharp object with the specimen rigidly supported 115/177/DTR IEC TR ED1: Reliability and availability evaluation of HVDC systems /193/CDV IEC ED1: Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on a substrate Page 3 of 6

4 120/116/FDIS IEC ED1: Electrical Energy Storage (EES) systems - Part 1: Vocabulary 121A/176/CDV IEC ED2: Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors 20/1780/CD IEC ED1: Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kv (Um = 7,2 kv) up to 60 kv (Um = 72,5 kv) - Test methods and requirements 21/943/CDV IEC ED1: Flow Battery Systems for Stationary applications - Part 1: Terminology 21/944/CDV IEC ED1: Flow Battery Energy System for Stationary applications Part 2-1: Performance general requirements and test methods 21/945/CDV IEC ED1: Flow Battery Systems for Stationary applications - Part 2-2 Safety requirements 21/946/CDV IEC ED8: Lead-acid starter batteries - Part 1: General requirements and methods of test 23G/394/FDIS IEC ED3: Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers 23G/395/FDIS IEC ED2: Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 23G/396/FDIS IEC ED2: Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement 31/1364/CD IEC ED1: Workplace atmospheres Part 2: Gas detectors Selection, installation, use and maintenance of detectors for toxic gases and vapours and oxygen 34/476A/FDIS IEC 62504/AMD1 ED1: Amendment 1 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions 34/478/CD IEC ED1: Measurement of the inrush current of lighting products 34A/2052/FDIS IEC Ed. 2: LED modules for general lighting - Safety specifications 34C/1374/FDIS IEC ED1: Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps 35/1388/CD IEC ED5: Primary batteries-part 4: Safety of lithium batteries 57/1951/FDIS IEC ED2: Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles 59F/341/CD IEC ED1: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for dry cleaning robots for household use 61/5573/CDV IEC ED2: Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating 61/5574/CDV IEC ED7: Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances 61/5575/CDV IEC ED4: Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations 61/5576/CDV IEC ED6: Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation 64/2253/CD IEC /AMD3 ED2: Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment ; Amendment on Clause /2255/CD IEC /AMD1 ED2: Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement Page 4 of 6

5 64/2256/CD IEC TS ED1: Application guide: Residential electrical installation in direct current not intended to be connected to Public Distribution Network 64/2257/CD IEC TS ED1: Electrical installation guide, Part 102: Application guide on Low Voltage direct current electrical installation not intended to be connected to Public Distribution Network 65B/1108/CDV IEC ED1: XML Exchange Formats for Programs according to IEC E/573/CDV IEC ED1: FIELD DEVICE INTEGRATION (FDI) PART 100: Profiles Generic protocols 66/654/CD IEC ED2: Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage 66/655/CD IEC ED4: Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement 89/1380/CD IEC TS ED3: Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot wire ignition test - Apparatus, confirmatory test arrangement and guidance 91/1471/CDV IEC ED1: Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Test methods for base materials for rigid printed boards Moisture Absorption after pressure vessel conditioning 100/3030/CD IEC ED1: Car multimedia systems and equipment - Drive monitor system Part 3 : Measurement methods 112/419/CD IEC TS ED1: Measurement of internal electric field in insulating materials - Pressure wave propagation method 121/29/CD IEC TS ED1: Environmental aspects for Low-Voltage Switchgear and Controlgear and their assemblies. 121A/177/CDV IEC /AMD1 ED5: Low-voltage switchgear and controlgear - Part 2: Circuit-breakers 121A/191/CD IEC TS ED1: PNW 121A-122: Low-voltage switchgear and controlgear - Part 7-5: Ancillary equipment - Terminal blocks for aluminium conductors 121A/193/CD IEC ED1: Low-voltage switchgear and controlgear - Active arc-fault mitigation systems - Part 9-2: Opticalbased internal arc-detection and mitigation devices 121A/194/CD IEC ED3: Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment 2/1886/CDV IEC /AMD1 ED1: Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests 26/646/CD IEC /AMD1 ED5: Arc welding equipment - Part 1: Welding power sources 26/647/CD IEC ED4: Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements 34/466/CDV IEC ED1: Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally Supplied Emergency Operation (device type 19) 47A/1037/CDV IEC ED2: Integrated circuits - Measurement of electromagnetic emissions - Part 1: General conditions and definitions 47A/1040/CD IEC ED1: Integrated circuits - EMC evaluation of transceivers - Part 3: CAN transceivers 59/675/CDV IEC ED3: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values 65E/574/CDV IEC ED1: FIELD DEVICE INTEGRATION (FDI) PART 115-2: Profiles Modbus-RTU Page 5 of 6

6 86B/4109/CDV IEC ED5: Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification 91/1481/CDV IEC ED3: Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies 100/3011/CDV IEC ED3: Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type- CTM Cable and Connector Specification 119/202/CD IEC ED1: Printed electronics - Part 204: Materials - Insulator ink Page 6 of 6