Zurn Fire Protection - Overview. December 2018

Transcription

1 Zurn Fire Protection - Overview December 2018

2 agenda what you ll learn 01 value proposition how it works 04 design & specify 05 summary 06 resources page 02

3 FIRE PROTECTION SOLUTIONS The perfect safety plan requires having the necessary fire protection solutions in place. Our technologically advanced backflow prevention products with USC certified flow curves, automatic control valves, and fire valves continually deliver consistent performance results; exceed all fire sprinkler code requirements; feature easier installation; and simplify repair and maintenance, resulting in lower cost of ownership and priceless peace of mind. Zurn Headquarters Milwaukee, WI fire protection system

4 WE RE SOLVING SMARTER Zurn, a trusted and reliable fire protection leader, is solving smarter with a comprehensive line of fire protection solutions, providing contractors and engineers a single industry expert simplifying your sourcing needs for a fire system. Zurn Fire Protection Solutions include trusted products to help you get your fire sprinkler project done right and ahead of schedule.

5 voice of customer industries contractor I need products that are easy and cost-effective to install, that are assembled and packaged in a manner that streamlines labor. engineer I need products that are durable and cost-effective and provide the lowest life-cycle costs for my clients. distributor I need products that are readily available, meet the project standards and are provided by a trusted, reliable brand. Healthcare Retail Food Service Hospitality Restaurants Institutional/Education Government page 05

6 overview fire protection system types Wet Pipe System is filled with water. During a fire, heat causes the sprinkler head element to burst, discharging water. Each sprinkler head is independent and reacts quickly to heat. Simplest and most common system design used in commercial applications Dry Pipe When wet pipe systems are at risk of freezing, dry pipe systems are recommended. Pipes are filled with pressurized air or nitrogen. When a sprinkler head is activated, air will be released, triggering the opening of a master valve which introduces water to the system Deluge The system is dry. The sprinkler heads do not contain the heat element, and are open. Once the master valve is triggered to open, water is introduced to the system and all the heads discharge water at once. The objective is to completely blanket the area with water Pre-action A dry system that is triggered by a fire or smoke detector. These systems are used in critical applications such as high value inventory or irreplaceable items are protected Foam For buildings that handle highly hazardous components and flammable liquids such as aircraft hangers, a foam blanket consisting of foam and water is discharged to completely envelop and extinguish the fire

7 Zurn fire protection components standpipe systems In North America, a standpipe is a type of rigid water piping which is built into multi-story buildings in a vertical position or bridges in a horizontal position, to which fire hoses can be connected, allowing manual application of water to the fire. Within the context of a building or bridge, a standpipe serves the same purpose as a fire hydrant. Wet standpipe systems (70% of the market) A "wet" standpipe is filled with water and is pressurized at all times. In contrast to dry standpipes, which can be used only by firefighters, wet standpipes can be used by building occupants. Wet standpipes generally already come with hoses so that building occupants may fight fires quickly. This type of standpipe may also be installed horizontally on bridges. Manual wet standpipe Must be supplemented by a fire department pumper truck via the fire department connection to achieve the necessary flow rates and pressure requirements at the most remote standpipe. Automatic wet standpipe Does NOT need a supplemental water supply but can be properly operated with the water supply and equipment it was originally designed, typically with a fire pump to boost the city water supply pressure and achieve the required pressures at the most remote standpipe.

8 Zurn fire protection product categories

9 Zurn fire protection components wet standpipe systems 5. Check Valves (Model F210) Retains water in the sprinkler system so that the Fire Department Connection can be utilized 4. Backflow Prevention (350ASTDABG shown) (DC, DCDA, RP, RPDA multiple options and configurations) Ensure water flows forward only, avoiding cross-contamination to your potable water supply 3. Automatic Control Valves (Model ZW209FP) Ensure steady downstream pressure, controlling inlet pressure, used as a system or floor control valve 2. Shut-Off Valves (Models 48OSY (shown), 48OSYG, 48OSYGXF, F48OS&YF, 48PI, 49, F49, F49BR, F49BRG) Full flow way valve serving as a systems control or floor control 1. Building Risers (Model Wilkins Building Riser - WBR) Deliver water to hose systems and sprinkler systems from the outside water supply line, typically from under the building Disclaimer for illustrative purposes only, not a typical system!

10 Zurn fire protection components wet standpipe systems Butterfly Valve Disclaimer for illustrative purposes only, not a typical system! 13. Fire Valves Pressure Reducing Valves (Z3000, Z3005, Z3004, Z2100, Z2105, ZW4100, ZW4104, ZW4000, ZW4004) Provides floor control (with check feature), used to isolate the sprinkler run so maintenance can be performed 10. Commercial Riser (Model FEZR-TD) Combines water flow detector, test and drain and pressure gauge to monitor systems pressure 12. Fire Valves Hose Valves/ Restricting Hose Valves (Models F100, F105) Standpipe valve listed for use as a fire department outlet connection (or fire hose rack assembly) 11. Test and Drain Valves (Model FTD) Provide for required water flow testing and draining of a sprinkler system with one valve 9. Riser Checks (Model F210R and optional Check Trim Kit) zone water check to prevent system reversal of flow; as required by systems including sprinkler standpipe systems and fire department connections 8. Butterfly Valve (Model F49) Short, light weight valve used as a system shutoff or floor control 7. Fire Department Connections (Model FDC2) Provide a means for firefighters to connect hose lines to a fire sprinkler system to supplement the domestic water supply, if needed 6. Fittings and Couplings (Model F210) Provide structure to the system, connecting pipe, changing pipe direction and reducing pipe sizes

11 high rise fire system component placement ZW4104 Pressure-Tru Pressure Reducing Fire Sprinkler Control Valve regulates pressure under both flow and no-flow conditions with Z3000 Pressure-Tru Pressure Reducing Fire Hose Valve a standpipe valve for individual hose stations to regulate pressure under both flow and non-flow conditions ZW4004 Pressure-Tru Pressure Reducing Fire Sprinkler Control Valve a factory set standpipe valve that regulates pressure under both flow and no-flow conditions Z3000 Pressure-Tru Pressure Reducing Fire Hose Valve a standpipe valve for individual hose station systems to regulate pressure under both flow and no-flow conditions 350AST Double Check Backflow Preventer with stainless steel body provides low hazard protection ZW215FP Fire Pump Suction Control Valve (Automatic Control Valve) controls the suction pressure to a fire pump, preventing cavitation and potential backflow conditions ZW205FP Pressure Relief Valve (Automatic Control Valve) protects fire protection systems by relieving high system pressures ZW209FP Pressure Reducing Valve (Automatic Control Valve) provides steady downstream pressure and allows high flow rates

12 in-building riser Wilkins building riser (WBR) Connects a water supply line from outside the building to the water system inside the building. Transitions horizontal run of pipe to vertical run for fire sprinkler riser, terminating above concrete slab. Eliminates joints under the slab Stainless steel construction Available 72 x 72 and 72 x 102 line extension sizes Lifting rings and thrust block anchor exclusive to Zurn is standard 4, 6, 8 and 10 pipe diameters Push on (C-900 or DIP) by grooved outlet with test cap and coupling (WBR and WBR6X8.5) Push on (C-900 or DIP) by flanged outlet (WBR-F) WBR-F WBR WBR6X8.5 page 015

13 backflow prevention Zurn patented compound check High hazard protection with a corrosion resistant, light weight design key features Provides a mechanical assist for a drip tight seal with low pressure loss Center guided stem designed for longevity and repeatability Serviceable in-line with cost-effective repair kits Lowest lifecycle cost of any manufacturer

14 double check large diameter The Zurn Wilkins Double Check Backflow Preventers (DC) provide low hazard protection for all water applications 350 Sizes 2-1/2 12 NRS (standard), OSY, PI or Butterfly (2-1/2"- 10") (optional) 350A Sizes 2-1/2 10 NRS (standard), OSY, PI or Butterfly (optional) 350AR Sizes 2-1/2 10 NRS (standard), OSY, PI or Butterfly 350ASTR Sizes 2-1/2 10 NRS (standard), OSY, PI or Butterfly 450 Sizes 2-1/2 10 NRS (standard), OSY, PI or Butterfly (4 10 ) optional) 350AST Sizes 2-1/2 10 NRS (standard), OSY, PI or Butterfly (optional) 450STR Sizes 4 10 NRS (standard), OSY, PI or Butterfly 450ST Sizes 4 10 NRS (standard), OSY, PI or Butterfly (optional)

15 backflow prevention 475STDA reduced pressure principle detector assembly detector assemblies (DA) Detects small water usage, either unauthorized use or a leak in the fire suppression system (static condition). Fire lines are generally not metered key features Double Check Detector Assemblies (DCDA) or Reduced Pressure Detector Assemblies (RPDA) options Serves as a water theft deterrent

16 double check detector large diameter The Zurn Wilkins Double Check Detector Backflow Preventers (DCDA) are ideal for low hazard protection, with a metered by-pass to detect leaks and unauthorized water use in unmetered fire sprinkler systems. 350DA Sizes 2-1/2 12 OSY (standard), PI or Butterfly (2-1/2"- 10") (optional) 350ADA Sizes 2-1/2 10 OSY (standard), PI or Butterfly (optional) 350ASTDAR Sizes 2-1/2 110 OSY (standard), PI or Butterfly (optional) 450DA Sizes 4 10 OSY (standard), PI or Butterfly (optional) 350ASTDA Sizes 2-1/2 10 OSY (standard), PI or Butterfly (optional) 450STDAR Sizes 4 10 OSY (standard), PI or Butterfly (optional) 450STDA Sizes 4 10 OSY (standard), PI or Butterfly (optional)

17 double check detector small diameter The Zurn Wilkins Double Check Detector Backflow Preventers (DCDA) are ideal for low hazard protection, with a metered by-pass to detect leaks and unauthorized water use in unmetered fire sprinkler systems. 950XLTDA Sizes 2 950XLTDABF Sizes 2

18 reduced pressure detector The Zurn Wilkins Reduced Pressure Detector Backflow Preventers (RPDA) provide protection where a high hazard exists in an unmetered fire protection system, with a metered by-pass to detect leaks and unauthorized water use 375ADAR 375DA Sizes 2-1/2 10 OSY (standard), PI or Butterfly (optional) 375ADA Sizes 2-1/2 10 OSY (standard), PI or Butterfly (optional) Sizes 2-1/2 10 NRS (standard), OSY, PI or Butterfly 375ASTDAR Sizes 2-1/2 10 OSY (standard), PI or Butterfly (optional) 475STDAR 475DA Sizes 4 10 OSY (standard), PI or Butterfly (optional) 475DAV Sizes 4 10 OSY (standard), PI or Butterfly (optional) Sizes 4 10 OSY (standard), PI or Butterfly (optional) 375ASTDA Sizes 2-1/2 10 OSY (standard), PI or Butterfly (optional) 475STDARV Sizes 4 10 OSY (standard), PI or Butterfly (optional) 475STDA Sizes 4 10 OSY (standard), PI or Butterfly (optional) 475STDAV Sizes 4 10 OSY (standard), PI or Butterfly (optional)

19 fire protection control valves ZW209FP pressure reducing valve fire protection valves Pressure reducing valve for fire protection applications Only manufacturer UL/c-UL Listed up to 10 FM approved No shut off valves in fire protection control valve pilotry connection types 150# flange 300# threaded 300# flange 300# grooved 5:13 Video Function of a ZW209FP page 026

20 automatic control valves (for larger systems) Fire systems can be complex, encompassing multiple control valve functions in order to provide adequate building safety 2:36 Video: Zurn Wilkins Pressure Reducing Valves ZW209FP ZW215FP pump suction control valve Sensing line plumbed to the inlet of the fire pump Pump begins to overdraft from the supply line (supply network). valve will begin to close, preventing a risk of damage to the supply network ZW205FP fire pump relief valve Relief valve, generally plumbed in a branch from the main fireline In the event that the upstream pressure exceeds a preset limit, valve will open, relieving pressure from the main ZW209FP pressure reduction valve Near constant pressure provided downstream regardless of water flow rate 2:36 Video: Zurn Wilkins Automatic Control Valves ZW215FP Fire Pump Suction Control Valve page 027

21 fire valves hose valve Model F100 and F100G Standpipe valve listed for use as fire department outlet connection. The Fire Ground Force will connect a hose, open the valve and manually fight the fire Can be used on a fire hose rack assembly Sizes: 1-1/2 and 2-1/2 Maximum inlet pressure: 300 psi Inlet connection: FNPT or Grooved Outlet connection: NH, FNPT or Special Thread (2-1/2 ) Available rough chrome plated (2-1/2) Standards Compliance: UL Listed C-UL, ULC Listed (2-1/2 only) FM Approved 212-F F100F 112-F100G page 028

22 fire valves restricting hose valve Model F105 Standpipe valve for hose stations Regulates pressure under FLOW conditions only Can be adjusted and set in the field while flow testing the standpipe riser Sizes: 1-1/2 and 2-1/2 Maximum inlet pressure: 175 psi Inlet connection: FNPT Outlet connection: NH, FNPT or Special Thread (2-1/2) Standards Compliance: UL Listed FM Approved 212-F105 page 029

23 check valves & riser checks check valves & riser checks Model F210 and Model F210R Provide zone water checking feature, as required by systems including but not limited to combined sprinkler standpipe piping systems. These valves ensure quick activation of sprinkler systems in the instance of a fire emergency. F210 used in conjunction with a FDC Check Trim Kits are sold separately and installed to complete riser checks F210R Sizes: 2, 2-1/2, 3, 4, 6, 8 Maximum pressure: 200 psi Standards Compliance: UL Listed C-UL, ULC Listed FM Approved 212-F210 4-F210R with trim kit installed 212-F210R page 030

24 commercial fire risers commercial fire risers Model FEZR Vertically mounted assemblies designed to connect a water supply line to a fire sprinkler system Each unit consists of a test and drain valve, a water flow detector switch, and a pressure gauge providing for the required system flow testing, alarm triggering upon activation of a fire sprinkler, draining of the system, and monitoring of the system water pressure Sizes: 2, 2-1/2, 3, 4 and 6 Maximum inlet pressure: 300 psi Inlet connection: Grooved Outlet connection: Grooved Standards Compliance: UL Listed FM Approved Listed by California State Fire Marshall 212-FEZR-TD page 031

25 test and drain valves test and drain valves Model FTP Provide for required water flow testing and draining of a sprinkler system with one valve In the test position this valve simulates flow of a single sprinkler with a 5.6 K-Factor orifice The drain position allows unrestricted flow for rapid draining of the system Clear sight glass plugs facilitates visual inspection of water flow through the valve Sizes: 1, 1-1/4, 1-1/2 and 2-1/2 Maximum inlet pressure: 300 psi Inlet connection: FNPT Outlet connection: FNPT Standards Compliance: UL Listed C-UL FM Approved 114-FTD-K56 page 032

26 shut-off valves fire OS&Y untapped Model F48OS&YF Untapped rising stem resilient wedge gate valve provides a visual indication of valves open/closed position Many jurisdictions require untapped OS&Y s Competitively priced Sizes: 2-1/2, 3, 4, 6, 8, 10 Standards Compliance: AWWA UL Listed C-UL, ULC Listed FM Approved page 033

27 shut-off valves Post indicator (PI) gate valve Provides a visual indication of the valve s open/closed position when coupled with an indicator post Non-rising stem gate valve with attachment plate for indicator post 48 outside stem & yolk (OS&Y) gate valve Provides a visual indication of valve s open/closed position Resilient wedge gate valve Flanged, grooved, or flanged x grooved connections Stand alone or on Zurn Wilkins backflow preventers 49 Butterfly Valve Integral supervisory switch with visual indicator Butterfly valve with grooved x grooved connections, grooved x flange connections and flange x groove connections

28 shut-off valves fire butterfly valves Model F49 Provides a slow opening anti-water hammer operation to control waterflow. An integral supervisory tamper switch provides a fire alarm control signal when the valve is moved from the open position. Sizes: 2-1/2, 3, 4, 6, 8 Maximum pressure: 300 psi Standards Compliance: UL Listed C-UL, ULC Listed FM Approved 4-F49 page 035

29 shut-off valves powerball butterfly valve Model F49BR and F49BRG Provide for system shutoff to facilitate repair and maintenance. Operated with a slow closing ¼ turn anti-water hammer valve. Tamper switches signal movement of the valve from the full open position to an alarm control panel, and to auxiliary equipment such as an indicating light or audible alarm in the area of the valve installation. Sizes: 1, 1-1/4, 1-1/2, 2 and 2-1/2 Grooved connections sizes: 1-1/4, 1-1/2, 2 and 2-1/2 Maximum working water pressure: 300 psi Standards Compliance: UL Listed C-UL FM Approved 112-F49BR 2-F49BRG page 036

30 fire department connections fire department connections Model FDC2 Fire Department Connections provide a means for firefighters to connect hose lines to a fire sprinkler system to supplement the domestic water supply pressure. Standpipe connection: 4 NPT Siamese inlet connections: 2 x 2-1/2 NH Maximum pressure: 300 psi Options: straight or 90 degree body style Standards Compliance: UL Listed C-UL, ULC Listed FM Approved 4x212-FDC2-EX-SC 4x212-FDC2-EX90-SC page 037

31 new products fire protection grooved couplings reducing, rigid, flex Model FP23, FP23R, FP23F Couplings are listed to join grooved pipes together. Rigid Couplings provide sturdy inflexible joints comparable to flanged, welded, or threaded connections. They are designed to prevent angular and axial deflection of connected pipes. Flexible Couplings allow joints to flex at the connection without leakage. They meet flexure requirements for structural settling, interbuilding piping, and seismic motion. 4-FP23R Reducing Couplings provide a flexible style joint between pipes of different sizes. Each reducing coupling makes a connection that would otherwise require two separate couplings and a reducer. Sizes: 1-1/4" 10" (Rigid and Flex), 1-1/2" by 1-1/4" to 8" by 6 (Reducing) Standards Compliance: UL Listed C-UL, ULC Listed FM Approved 4x2-FP23 page 038

32 Zurn fire protection fittings all compliant UL Listed C-UL, ULC Listed FM Approved Elbows (FP52) and Tees (FP53) branch connections for 1 ¼ through 10 pipes and are available tee short radius (S), tee standard radius and reducing branch tree Crosses (FP56) standard grooved fittings to connect runs of pipe in crossing directions Caps (FP3) standard grooved pipe ends Mechanical Tees (FP63) provide fast, convenient mid-pipe branch connections without welding Grooved Flanges (FP8) standard converters for connecting flanges to grooved or threaded pipes Grooved Reducers (FP51) page 039 connect pipes of different sizes. Concentric grooved-grooved, groovedmale, and grooved-female options are available. Grooved-grooved reducers are also available with eccentric (E) configurations

33 Zurn fire protection components couplings wet system

34 pressure control valve pressure control valve Model P4000A Prevents pressure build-up in a fire protection system whenever the pressure exceeds the setting of the spring caused by pumps, elevated piping, and thermal expansion Standard adjustability psi Also available in psi version Cast bronze and stainless steel construction Standards Compliance: UL Listed C-UL FM Approved

35 ancillary products Ball Valve Monitor Switch (BVMS) Mounted on a backflow preventer s ball valve shutoffs in a fire sprinkler system, it will signal if ball valve handle is moved from an open position Fixed Air Gaps Collects water discharge from reduced pressure backflow assemblies, duracoated cast iron body Gate Valve Supervisory Switch (OSY-40) Used to monitor the position of and OS&Y type gate valve. Setters Used with 400 series DI and Stainless backflows, valve setters ease installation time and eliminate the need for concrete thrust blocks.

36 fire valves Pressure-Tru *Field adjustable valves can be ordered as factory set and adjusted in the field Application Use Size Factory Set (set at the factory to criteria furnished by the customer) Field Adjustable* (sized and set in the field by the customer) S t a n d p i p e Automatic Fire Sprinkler System Hose Valve Floor Control Fire Department Hose Rack 2 ½ ZW4004 Z ½ ZW ½ ZW4000 Z ½ ZW4100 Z ½ Z ½ ZW4100 page Z

37 control valves for fire systems Typical High Rise Fire Sprinkler System As the industry leader, with 60-70% market share in smart fire protection solutions, we deliver water safety, and pressure management solutions with backflow prevention assemblies and pressure reducing valves that are easily serviced and provide the lowest life-cycle costs. types Hose Valves On / Off Pressure Restricting Size 2 ½ Range psi Size 1 ½ Range psi Multiple hose thread options Direct Acting Pressure Reducing All sizes Range over 175 psi Sprinkler Floor Control Valves Direct Acting Pressure Reducing All sizes Range over 175 psi Sprinkler Floor Control Valve pressure reducing key features Used when fire sprinkler system pressure exceeds 175 psi to reduce pressure below 175 psi Provide water on/off control Provide check feature for sprinkler applications Inline globe (IL) and angle bodies Threaded and grooved connections; multiple thread options Tapped and plugged for gauges Commonly in risers in stairways Hose Valve

38 sprinkler floor control Pressure-Tru sprinkler valves Serves as a floor control valve, indicating valve, and check valve in automatic sprinkler systems Z3004SS floor control valve 1½ 2½ key features Zurn has more benefits than any competitor Cleanable and repairable while inline Limits static outlet pressure below 175 psi as required by NFPA (National Fire Protection Association) Regulates pressure under both flow and no-flow conditions Supervisory switch (SS option) Inline globe or angle body configurations options Grooved or threaded connections 4:20 Video: Zurn Wilkins Pressure Reducing Valves ZW4004 Fire Sprinkler Control Valve Field Adjustable Factory Set ZW4104 Factory Set 1-1/2" Pressure Reducing Sprinkler System Valves Z3004 Field Adjustable 2-1/2" Pressure Reducing Sprinkler System Valves page 045 ZW4004G Factory Set 2-1/2" Pressure Reducing Sprinkler System Valves

39 hose valves Z3000 hose valve Pressure-Tru Hose Valves Serves as a standpipe valve for individual hose stations for CLASS I, II, and III systems 1½ 2½ key features Cleanable and repairable while inline Regulates pressure under both FLOW / NO-FLOW conditions Limits static outlet pressure below 175 psi as required by NFPA Factory set or field adjustable outlet pressure setting Inline globe or angle body configurations Grooved or threaded inlets; local thread options available Available rough chrome finish 4:34 Video: Zurn Wilkins Pressure Reducing Valves Z3000 Series for Fire Protection Systems Field Adjustable Factory Set Z2100 Field Adjustable 1-1/2" Pressure Reducing Hose Valve ZW4100 Z4100 Factory Set 1-1/2" Pressure Reducing Hose Valve Z3000 Field Adjustable 2-1/2" Pressure Reducing Hose Valve page Z ZW4000G Factory Set 2-1/2" Pressure Reducing Hose Valve

40 Test Your Knowledge What are Zurn fire valves top 3 benefits? A. High durability and reliability B. Cleanable and repairable while inline C. Water conservation D. Diverse set of fire valves

41 how to specify step-by-step 1 2 standpipe application Automatic fire sprinkler system or hose valve use Automatic fire sprinkler system for floor control, hose valve for fire department, or hose valve for hose rack 3 size 2-1/2 or 1-1/2 4 factory set vs. field adjustable Set by the factory according to client specifications or field adjustable by client

42 resources factory set sizing web tool size and set direct acting correctly page 056

43 resources tools Create unlimited configurations Solidify your basis of design Generate your submittal package Edit, share and copy projects Zurn.com tools inspec Manufacturer Cross Reference ARCAT Create configurations, solidify your basis of design, generate your submittal package, edit/share/copy projects Select a manufacturer, then product, type, or competitor product number to find the corresponding Zurn Product Review CAD, BIM, and spec files MasterSpec BIM/Revit Files Cross Reference Guides Product Warranties Review spec files Browse BIM objects Review cross reference guides for individual products Review One Zurn terms and conditions page 057

44 resources sample order forms on zurn.com To ensure customer receives the correct product on time for their project Forms for Hose Valves Z3000 Z2100 ZW4000 / Z4000G Z2105 Z3005 ZW4100 Forms for Floor Control Valves Z3004 / ZW3004SS ZW4004 / ZW4004SS ZW4104 / ZW4104SS

45 summary Zurn overview For more than a century, Zurn Engineered Water Solutions has established itself as an innovator and leading manufacturer of highly engineered water product solutions. Markets We Serve Zurn Engineered Water Solutions is a recognized leader in commercial, municipal, and industrial markets, delivering sustainable building solutions for new construction and retrofit applications. Industry Leading Product Lines The Zurn product offering includes items such as specification drainage products, manual and sensor operated flush valves, radiant heating systems, snow melt systems, trench drain systems, backflow and fire protection systems, and much, much more. Solutions We Provide At Zurn we are committed to providing smart solutions that save time and money. Our goal is serving the customer through innovation, continuous improvement, and assurance behind every installation. One Choice. One Zurn. Choose Zurn for a reliable, recognized manufacturer to supply your entire installation, from behind the wall rough-in, to finished trim product and fixture systems. page 061

46 resources support address phone online 511 Freshwater Way Milwaukee, WI toll-free ONE-ZURN zurn.com Product Pages Tools, Specifications, & Resources Vertical Market Solutions inspec Manufacturer Cross Reference ARCAT MasterSpec SpecBuilder Specifiers BIM/Revit Files zurn.com/resources/product-training Zurn Product - Overview How to Install and Support linkedin/zurn Industries, LLC facebook/zurn Industries, LLC youtube/zurn twitter/zurnind page 062