EXTRA WIDE ANGLE ARRAYS EWA 0.3 GI V1 EWA 0.53 GI V1 EWA 1.35 GI V1 ANIMAL ALLEY ARRAYS AA 0.53 GI V1 AA 0.53 GI M1 AA 0.9 GI M1.

Transcription

1 VARIOUS PIR ARRAYS The various Fresnel Technologies lens arrays shown in the accompanying data sheets are intended to be used in passive infrared motion detector devices. They are optimized for dual-element pyroelectric detectors. They are normally used with the grooved side facing the pyroelectric detector, and curved at a radius about the sensitive area of the detector. The detector position should be as shown, and centered left-right (see Figures 1 9). The overall dimensions of the arrays are as shown in the data sheets. Their usual thickness is.15 ±.4 (.38 mm ±.1 mm). Border width is also as shown in the figures. Centering is held to.15 (.38 mm) in both directions, except for the EWA.3 GI V1, where it is held to.5 (.12 mm). Fresnel Technologies, Inc. is the premier manufacturer of Fresnel lens arrays. We have led the industry in the development of new lenses and materials to advance the state of the art of passive infrared motion detection. Our lenses and lens arrays have been incorporated into most passive infrared devices using refractive optics since Our quality standards are the highest in the industry. Surface finish and inclusions are such that no defect is visible at a distance of 3 feet (1 meter) under ordinary light. There are no functional flaws in our products whatsoever. Our POLY IR infrared-transmitting materials are the best available in stiffness and in transmittance in the 8 to 14 µm region. Active lens segments are made from our acclaimed and proprietary LODIFF lens patterns. Patents have been issued or are pending on several of the designs shown. The various lens arrays shown in the data sheets are: WIDE ANGLE ARRAYS WA.9 GI 6 V1 WA.9 GI 6 V2 WA.9 GI T1 WA 1.13 GO 14 V1 EXTRA WIDE ANGLE ARRAYS EWA.3 GI V1 EWA.53 GI V1 EWA 1.35 GI V1 ANIMAL ALLEY ARRAYS AA.53 GI V1 AA.53 GI M1 AA.9 GI M1 The mounting configuration for each array can be derived from a combination of its name and its data sheet. The first portion of the name (e.g. WA) denotes the classification of the array (in the case of WA, wide angle). The second portion denotes the focal length (i.e., the distance from the lens array to the active elements of the pyroelectric detector). GI or GO indicates that the array is designed to be used with its grooves toward or away from the detector, respectively. If there is a number after GI or GO, it indicates the number of degrees of downward tilt. If there is no number in that position, the array is meant to be used with no tilt. The final por tion is the version or type of the particular array within its classification and focal length. Each data sheet indicates the vertical position of the centerline of the pyroelectric detector with respect to the lens array s bor der, and also shows the preferred mounting height and downward tilt. The data sheets of Figures 1 14 illustrate the zone patterns for the arrays. The figures postulate a dual-element detector with 11 coverage both up-down and left-right, amplifier gain of about 5,, a mounting height of 3.3 feet (1 meter) for the animal alley lens array and the EWA.3 GI V1 and 6.8 feet (2.1 meters) for the oth ers, and downward tilts as shown in each array s designation. CM 1. GI T1 is intended to be mounted on the ceiling, facing straight downward, at up to 49 feet (15 meters) from the floor. Other configurations (smooth side toward the detector, curved at other radii, tilted at other angles, etc.) can be used as well, but the zone patterns illus trated in Figures 1 9 will not apply. f PET IMMUNE ARRAY WP 1.13 GI V1 WALL SWITCH ARRAY WS.53 GI V1 CEILING MOUNT ARRAY CM 1. GI T1 NEW! Copyright Fresnel Technologies, Inc

2 WIDE ANGLE ARRAY WA.9 GI 6 V1 1.1mm (.4in) 29.2mm (1.15in) 62.7mm (2.47in) m (6.8ft) 1.4m (5ft) 4.1m (14ft) 1. (34ft) Figure

3 WIDE ANGLE ARRAY WA.9 GI 6 V2 1.1mm (.4in) 29.2mm (1.15in) 62.7mm (2.47in) m (6.8ft) 1.4m (5ft) 4.1m (14ft) 1. (34ft) Figure

4 WIDE ANGLE ARRAY WA.9 GI T1 16.4mm (.65in) 1 (49ft) 42mm (1.65in) 62mm (2.44in) 5.m 14 1 (49ft) 2.1m (6.8ft) (4.5ft) 3.3m (11ft) 7.3m (24ft) 2m (66ft) Figure

5 WIDE ANGLE ARRAY WA 1.13 GO 14 V1 22.4mm (.88in) 1 (49ft) 44.7mm (1.76in) 56.4mm (2.22in) (49ft) 2.1m (6.8ft) 2m (7ft) 5.2m (17ft) 2m (66ft) Figure

6 EXTRA WIDE ANGLE ARRAY EWA.3 GI V1 1." (25.4mm).3" (7.6mm) 4.6 m.34" (8.6mm).925" (23.m) Note: Lensed area is.3" x.885" Maximum die-cut size is.635" x 1.22" m 3 4.6m Figure

7 EXTRA WIDE ANGLE ARRAY EWA.53 GI V1 9m (3ft) 22.4mm (.88in) 52.1mm (2.5in) 11.2mm (.44in) 4. (15ft) 13.m (.53in).7in R (15ft) 9m (3ft) 1m (3.3ft) 1. (5ft) 23 9m (3ft) Figure 6

8 EWA 1.35 GI V1 "Beam" diagram 9 m (3 ft) 6 m (2 ft) 6 m (2 ft) 9 m (3 ft) 3m (1 ft) Note: 2 "beams" shown as if along pattern centerline in side view 3 m (1 ft) 6 m (2 ft) 9 m (3 ft) 12m (4 ft) 15 m (5 ft) 2 Figure 7 Drawn By: Brian Dow

9 EWA 1.35 GI V1 Mounting details Detector Centerline Upper Array (GROOVED SIDE) 13mm 39mm 37.m 36mm 27mm 26mm 22.m 2mm C L TOP 26.m 2mm 1.2m FOLDING LINE x2 1m 16.m 18mm C L 1.m dia. 1.m Lower Array (GROOVED SIDE) LC TOP Detector Centerline m 6.m 8mm C L 19mm 16.3mm 13.8mm 13.8mm 22mm Scale:1 to 1 Figure 8 2 Drawn By: Brian Dow

10 EWA 1.35 GI V1 Detector location Upper Array Upper Array 2 13mm 2m Lower Array Lower Array Upper Array 3mm R 15mm R FTI USA Lower Array Scale:1 to 1 Figure 9 2 Drawn By: Brian Dow

11 ANIMAL ALLEY ARRAY AA.53 GI V1 8m (26ft) 28.m (1.12in) 15.2mm (.6in) 38.3mm (1.51in) 4m (13ft) 11 4m (13ft) 8m (26ft) 1.m (3.3ft) Figure

12 ANIMAL ALLEY ARRAY AA.53 GI M1 12m (4ft) (28.2mm) (1.11in) (1m) (.59in) (48.3mm) (1.9in) 6m (2ft) 13.m (.53in).53in R 125 6m (2ft) 16 12m (4ft) 1m (3.3ft) 23 12m (4ft) Figure 11

13 ANIMAL ALLEY ARRAY AA.9 GI M1 23.9mm (.94 in) 1 (5ft) 45.7mm (1.8 in) 76.2 mm (3 in) 7. (25ft) 22.9mm (.9 in) R 7.5 m (25ft) 1 (5ft) 1m (3.3ft) m (5ft) Figure 12

14 PET IMMUNE ARRAY WP1.13GIV1 17mm (.67 in) 14mm (.55 in) 3m (98ft) 44mm (1.73 in) 2m (66ft) 57mm (2.24 in) 28.7mm (1.13 in) mm R (1.13 in) 2m (66ft) 3m (98ft) 2.1m (6.8ft) 2m (6.6ft) 12m (39ft) 1 (49ft) 3m (98ft) Figure 13 23

15 WALL SWITCH ARRAY WS.53 GI V1 (32ft) 24.6mm (.97in) 9.m (.37in) 42mm (1.65in) 13.m (.53in).53in R 184 (32ft) 2.1m (6.8ft) 2m (14ft) (32ft) (7ft) Figure 14

16 ju m CEILING MOUNT ARRAY CM 1. GI T1 ( FLOOR PATTERN FOR QUAD ELEMENT DETECTOR) 1.3in R 25.4mm (1in) 1 (49ft) m 9m (29.5ft) 5.9m 2.3m 2.3m 5.9m (19ft) (7.5ft) (7.5ft) (19ft) 9m (29.5ft) Figure 15 28