The right fit for your high-output applications

Transcription

1 The right fit for your high-output applications Philips Advance programmed-start ballasts for T5HO lamps are available for a wide variety of applications No matter what the conditions require, operating at a variety of line voltages between 0V to 80V, whether located in high ambient temperature environments (requiring a 90 C rating) or not, if you desire hi-low switching options for improved energy efficiency (-lamp models only), our family of Philips Advance ballasts for T5HO lamps are ideal for a wide variety of applications. All of these ballasts utilize programmed-start circuitry which provides extended lamp life in frequent switching applications like those associated with the use of occupancy sensors or motion detectors. These ballasts additionally feature IntelliVolt multiple voltage technology, auto-restrike capability, and lamp End-Of-Life (EOL) protection circuitry which safely removes power from the lamp upon failure. compatible with energy saving lamps. For specific lead lengths visit our e-catalog at Programmed Start Potentially extends lamp life in frequent switching applications such as occupancy sensors or daylight harvesting. -0 F Capability (-9 C) models only). High-Low Switching on -Lamp Models with just one ballast. Our ballasts for T5HO lamps are the optimal choice for a broad range of retail, commercial and institutional and industrial applications including; warehouses, manufacturing, schools, offices, and speciality and department stores. For additional energy saving opportunities Philips Advance T5HO ballasts are

2 No. of Lamps Volts FT5/HO (W) Lamp Method allast Family F9T5/HO (9W) Catalog Number Power ANSI (Watts) allast Factor Max. TH % Line Current (Amps) ICN-S ICN-S ICN-S Min. Temp. ( F / C) im. Wiring iag. 0/-8 0/-8 7 0/ /-8 7 F5T5/HO (9W) HCN-S5-90C-WL L HCN-S5-90C-WL L 7 -G HCN-S5-90C-LS-G F5T5/HO (5W) -G HCN-S5-90C-LS-G G 75 G 75A 7-80 HCN-S5-90C-WL L HCN-S5-90C-WL L 7 -G G 7-80 HCN-S5-90C-LS-G F80T5/HO (80W) -G HCN-S5-90C-LS-G A G 75 ICN-S /-8 FTW/G - /7W (PL-LW, F7X/RS, FTL) ICN-S+ ICN-S /-8 7A

3 No. of Lamps Volts Lamp Method allast Family FT6W/G - 6/9W (PL-L6W, F9X/RS, FT6L) Catalog Number ICN-S+ Power ANSI (Watts) 6 6 allast Factor Max. TH % 5 0 Line Current (Amps) Min. Temp. ( F / C) 7-80 HCN-S5-90C-WL L / HCN-S5-90C-WL L -G HCN-S5-90C-LS-G G HCN-S5-90C-LS-G FT50W/G/RS - 50W (PL-L50W, F50X/RS) im. Wiring iag. 7A G 75A G HCN-S5-90C-WL L A 7-80 HCN-S5-90C-WL L -G HCN-S5-90C-LS-G G HCN-S5-90C-LS-G FT55W/G - 55W (PL-L55W, F55X, FT55L) E 75A E HCN-S5-90C-WL L HCN-S5-90C-WL L 7A -G HCN-S5-90C-LS-G G HCN-S5-90C-LS-G /-8 7A G 75A G 75

4 No. of Lamps Volts Lamp Method allast Family FT80W/G - 80W (PL-L80W, FT80L) Catalog Number Power ANSI (Watts) allast Factor Max. TH % Line Current (Amps) Min. Temp. ( F / C) ICN-S /-8 FC9T5 (W Circline) FCT5 (0W Circline) ICN-S+ ICN-S+ ICN-S im. Wiring iag. 0/-8 0/-8 7 0/ /-8 7 () FC9T5 & () FCT5 {() W & () 0W Circline} & /-8 7 FCT5/HO (55W Circline) ICN-S5*+ ICN-S5-90C* / HCN-S5-90C-WL L ICN-S5*+ ICN-S5-90C* / HCN-S5-90C-WL L

5 -lamp ORANGE LAMP For one lamp operation, do not use yellow leads S ON OFF LAM Neutral or (any hot) LAM ON LAM ON LACK WHITE GREY/RE S 50V, ma RE LUE ROWN YELLOW LAMP LAMP iag. * iag. 75* iag. 7* iag. 75A* * For all HCN ballasts hot leads are black with orange with black and white Grey/red wire must be connected to the neutrals or any hot Fig. Fig. L Fig. Fig. G

6 allast Specification Section I - Physical Characteristics. allast shall be physically interchangeable with standard electromagnetic or standard electronic ballasts, where applicable.. allast shall be provided with integral leads color-coded per ANSI C8.. Section II - Performance Requirements. allast shall be Programmed Start.. allast shall contain auto restart circuitry in order to restart lamps without resetting power.. allast shall operate from 50/60 Hz input source of 0V through 77V or 7V through 80V with sustained variations of +/- % (voltage and frequency) with no damage to the ballast.. allast shall be high frequency electronic type and operate lamps at a frequency between khz and 5kHz to avoid interference with infrared devices, eliminate visible flicker and avoid Article Surveillance Systems, such as anti-theft devices..5 allast shall have a Power Factor greater than 0.98 for primary lamp..6 allast shall have a minimum ballast factor of.0 for primary lamps..7 allast shall provide for a Lamp Current Crest Factor of.7 or less in accordance with lamp manufacturer recommendations. of less than % when operated at normal line voltage with full load primary lamps..9 allast shall have a Class A sound rating.. allast shall have a minimum starting temperature of -8 C (0 F) or -9 C (-0 F) for primary lamp.. allast shall provide Lamp EOL Protection.. allast shall tolerate sustained open circuit and short circuit output conditions without damage. Section III - Regulatory Requirements. allast shall not contain any Polychlorinated iphenyl (PC).. allast shall be Underwriters Laboratories (UL) listed, Class P and Type Outdoor; and Canadian Standards Association (CSA) certified where applicable.. allast shall comply with ANSI C6. Category A for Transient protection.. allast shall comply with ANSI C8. where applicable..5 allast shall comply with the requirements of the Federal Communications Commission (FCC) rules and regulations, Title 7 CFR part 8, Non-Consumer (Class A) for EMI/RFI (conducted and radiated)..6 allast shall comply with UL Type CC rating. Section IV - Other. allast shall be manufactured in a factory certified to ISO 900 Quality System Standards.. allast shall carry a limited warranty from date of manufacture against defects in material or workmanship. (Go to our web site for up-to-date warranty information: Manufacturer shall have a twenty-year history of producing electronic ballasts for the North American market. 0 Philips Lighting Electronics N.A. All rights reserved. Form No. EL / Philips Lighting Electronics N.A. 75 W. Higgins Road Rosemont IL 6008 Tel: Fax: Customer Support/Technical Service: OEM Support: