Modular & linear architectural lighting for residential and commercial environments.
|
|
- Alyson Lindsey
- 6 years ago
- Views:
Transcription
1 THIN Lighting System Modular & linear architectural lighting for residential and commercial environments.
2 2 THIN System Product Guide A PPLICA T I O N S: SUSP E N SI O N Office Lighting Suspended Task Lighting Display Lighting Residential The THIN System includes Suspension, Surface Mount and Task lighting for an integrated, functional, minimal look that fits today s office environments. Hand-finished solid brass feels precise and warm. The combination of a 1/2 diameter profile and fully rotatable Light Segments make this an elegant, low visual impact option for illuminating precious artworks and objects. Beam angle options keep light where it is needed W W W. J U N I PER -DESIGN.COM The rotatable Light Segments allow the fixture to aim light on a countertop or work surface, and the beam angle options and high CRI mean the light is focused and high quality. Available in multiple luxury finishes, the all-brass THIN System feels appropriate next to high-end furniture pieces in a residential setting. INFO@J UNIPER -DESIGN.COM R D S T, U N I T 1 1 B R O O K LY N, N Y
3 FEATURES & BENEFITS: SUSPENSION THIN System Product Guide 3 cutaway showing connectors Magnetic Connectors Slim and elegant, the THIN System Suspension is held by a clever magnetic connector system. This allows for easy installation, long runs, and freely rotatable Light Segments. Direct & Indirect Rotating Segments allow for direct or indirect light from the same fixture. Additional Features: Quality Light 3000K and 90CRI standard with 2700K and 4000K options available 600 lumens per 24 segment 920 lumens per 36 segment Simple Installation Whole-inch spacing, rotatable Light Segments, snap-in magnetic connectors, and 24VDC low-voltage wiring make install easy. Minimal Profile 1/2 [12.7mm] diameter Light Segments allow the fixture to hang lower in the room without obstructing sightlines. This means light where it is needed, creating more intimate, thoughtful spaces. Luxury Finishes & Materials Satin Brass, Satin Nickel, and Black Oxide finishes complement high-end interior construction. Brass and acrylic are sturdy and long-wearing. Configurability Constant-voltage system means multiple Light Segments can be powered from one driver, simplifying system design. Multiple driver options are available to meet most dimming requirements.
4 TECHNICAL THIN Suspension THIN System Product Guide 4 0.5in [1.2cm] segment 0.7in [1.7cm] connector 24in and 36in Light Segments may be combined in the same fixture Standard max length per fixture is (3) 36 Light Segments 110.8in [281.5cm] For longer runs, please contact Juniper Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Local Driver Canopy 6.5in dia x 2.4in Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available 24 Segment 600 lm delivered / 8W 36 Segment 920 lm delivered / 12.3W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
5 THIN System Product Guide 5 BUILD A SPECIFICATION THIN Suspension SERIES FINISH SEGMENTS COLOR TEMP JPR-THES SAMPLE SKU: JPR-THES F-L6A Satin Brass, (3) 36 segments, 3000K, frosted lens, local in-canopy 40W Standard power supply (3 X 9.4W = 28.2W total) SAMPLE SKU: JPR-THES C-R5F Black Oxide, (1) 36 segment, (1) 24 segment, 2700K, clear lens, remote 40W Lutron power supply with 5 canopy LOCAL/REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) L Local Power Supply - pre-installed in canopy R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 8.0W 3 36 inch segment lm delivered / 12.3W note: each digit represents a single segment, e.g is (1) 24 segment and (1) 36 segment Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle CANOPY round canopy (for local power supply) 5 5 x 0.5 round canopy (covers junction box) X no canopy POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase Dims to 5%, 120 VAC B Standard 20W - TRIAC/Forward Phase Dims to 5%, 120 VAC C Standard 12W - TRIAC/Forward Phase Dims to 20%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure E Lutron 40W Local - TRIAC/Forward Phase Dims to 1%, 120 VAC input F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem Dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
6 APPLICATIONS: SURFACE MOUNT THIN System Product Guide 6 Under Cabinet Lighting 45mm Standoffs are perfect for undercabinet applications, unobtrusive and elegant. Retail Display Configurable and extendable low voltage light modules are easily integrated into display settings. High CRI LEDs make products look their best. Picture Light 180mm Standoffs are designed for lighting artwork. Plugin and Low Voltage Direct installation options fit multiple situations. Bathroom Vanity ETL Listed, damp location rated for bathroom vanity use. The Light Segments are infinitely rotatable for perfect light angles.
7 THIN System Product Guide 7 FEATURES & BENEFITS: SURFACE MOUNT cutaway showing connectors Magnetic Connectors The low-voltage magnetic connectors incorporated into the Light Segments are incredibly functional - the lighting direction can be rotated when the fixture is lit, and they make installation easy and intuitive. Multiple Standoff Heights 45mm, 90mm, and 180mm Standoffs allow for a range of applications, from undercabinet and soffit lighting to retail display, library stacks, and general wall-washing. Additional Features: Quality Light 3000K and 90CRI standard with 2700K and 4000K options available 600 lumens per 24 segment 920 lumens per 36 segment Simple Installation Whole-inch spacing, rotatable Light Segments, snap-in magnetic connectors, and 24VDC low-voltage wiring make install easy. Luxury Finishes & Materials Satin Brass, Satin Nickel, and Black Oxide finishes complement high-end interior construction. Brass and acrylic are sturdy and long-wearing. Rotatable Light Segments The magnetic connectors mean that one fixture can be configured to wash light up, down, or back on the wall. A multiple segment fixture can have segments illuminating different things. Configurability Constant-voltage system means multiple Light Segments can be powered from one driver, simplifying system design. Multiple driver options are available to meet most dimming requirements.
8 TECHNICAL THIN Surface Mount THIN System Product Guide 8 Standoff Options 7.1in [180mm] 0.5in [1.2cm] 3.5in [90mm] 1.9in [45mm] 1.2in [3.0cm] 24in and 36in Light Segments may be combined in the same fixture Standard max length per fixture is (3) 36 Light Segments 110.8in [281.5cm] For longer runs, please contact Juniper Plug-in Power Supply with RF Remote Control Dimmer, Holder, and Cord Wrap Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available 24 Segment 600 lm delivered / 8W 36 Segment 920 lm delivered / 12.3W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 120VAC Input Voltage 24VDC Class 2 Constant Voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING Wall brackets mount directly to drywall SYSTEM RUN Limited by driver wattage only 2 X 18AWG in-wall rated cable recommended for remote power supply installation GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
9 THIN System Product Guide 9 BUILD A SPECIFICATION THIN Surface Mount SERIES FINISH SEGMENTS STANDOFFS COLOR TEMP JPR-THEW SAMPLE SKU: JPR-THEW C-RXC Satin Brass, (3) 24 segments, 90mm standoffs, 3000K, clear lens, remote power supply, no cover plate, 20W power supply (3 x 6.1W = 18.3W total) SAMPLE SKU: JPR-THEW F-SXG Black Oxide, (1) 36 segment, (1) 24 segment, 180mm standoffs, 2700K, frosted lens, plug-in pwer supply with remote control POWER LOCATION POWER SUPPLY CODE DEFINITIONS 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 8.0W 3 36 inch segment lm delivered / 12.3W note: each digit represents a single segment, e.g is (1) 24 segment and (1) 36 segment, is (3) 36 segments Contact Juniper for custom segment lengths STANDOFF LENGTH mm Standoffs - for undercabinet mm Standoffs - for general wall-wash and display mm Standoffs - for picture lighting COLOR TEMPERATURE K K K POWER LOCATION R Remote Power Supply Location - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician S Plug-in Power Supply Location - plugs into outlet, includes RF remote control dimmer, and 3 meters of cord - requires X and G below, i.e. -SXG *not available with 045 POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase Dims to 5%, 120 VAC B Standard 20W - TRIAC/Forward Phase Dims to 5%, 120 VAC C Standard 12W - TRIAC/Forward Phase Dims to 20%, 120 VAC note:for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem Dimming drivers available (up to 96W) G 24VDC 36W Plug-in Power Supply X no power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements C Clear - 40 degree beam angle F Frosted - 90 degree beam angle Project Type Notes
10 THIN System Product Guide in (180 mm) Standoff 3.5 in (90 mm) Standoff 1.9 in (45 mm) Standoff Use the following two pages to visualize your desired standoff height. Our drawings are to-scale and easily printable to help envision our three standoff heights. While this page shows a simple 2D to-scale drawing, you can get creative and assemble 3D models from the template shown on the next page.
11 THIN System Product Guide in (180 mm) Standoff 3.5 in (90 mm) Standoff 1.9 in (45 mm) Standoff For 3D models, print out this page, cut along seams, fold into place, and hold together with tape. We recommend keeping top and bottom circles connected to cylinder walls for easier assembly. Dark circles mark where light segments connect to the standoffs.
12 12 THIN System Product Guide A PPLICA T I O N S: P R I M A R I E S Wall-Mounted Lighting The THIN System includes wall-mountable options like the Surface Mount and Primaries for an integrated, minimal look that creates a functional lighting installation. Handfinished solid brass feels precise and warm. Display Lighting The combination of a 1/2 diameter profile and fully rotatable Light Segments make this an elegant, low visual impact option for illuminating precious artworks and objects. Beam angle options keep light where it is needed W W W. J U N I PER -DESIGN.COM Suspended Task Lighting The rotatable Light Segments allow the fixture to aim light on a countertop or work surface, and the beam angle options and high CRI mean the light is focused and high quality. Residential Available in multiple luxury finishes, the all-brass THIN System feels appropriate next to high-end furniture pieces in a residential setting. INFO@J UNIPER -DESIGN.COM R D S T, U N I T 1 1 B R O O K LY N, N Y
13 FEATURES & BENEFITS: PRIMARIES THIN System Product Guide 13 cutaway showing connectors Magnetic Connectors Slim and elegant, the THIN System Suspension is held by a clever magnetic connector system. This allows for easy installation, long runs, and freely rotatable Light Segments. Direct & Indirect Rotating Segments allow for direct or indirect light from the same fixture. Additional Features: Quality Light 3000K and 90CRI standard with 2700K and 4000K options available 920 lumens per lumens per 24 segment Simple Installation Whole-inch spacing, rotatable Light Segments, snap-in magnetic connectors, and 24VDC low-voltage wiring make install easy. Minimal Profile 1/2 [12.7mm] diameter Light Segments allow the fixture to hang lower in the room without obstructing sightlines. This means light where it is needed, creating more intimate, thoughtful spaces. Luxury Finishes & Materials Satin Brass, Satin Nickel, and Black Oxide finishes complement high-end interior construction. Brass and acrylic are sturdy and long-wearing. Configurability Constant-voltage system means multiple Light Segments can be powered from one driver, simplifying system design. Multiple driver options are available to meet most dimming requirements.
14 THIN System Product Guide 14 TECHNICAL THIN Primaries Triangle Suspension 24in nominal in [69.3cm] 36in nominal -40.3in overall [102.4cm] 24 - max. 116in [292.1cm] 36 - max. 115in [294.6cm] Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available lm delivered / 24W lm delivered / 36.9W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING (3) 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
15 THIN System Product Guide 15 BUILD A SPECIFICATION THIN Primaries Triangle Suspension SERIES FINISH CONFIGURATION SEGMENTS COLOR TEMP JPR-THES TRI - X X R 5 SAMPLE SKU: JPR-THES-02-TRI-2-27-C-R5A Black Oxide, 24 segments, 2700K, clear lens, remote 40W Lutron power supply OR 3 REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 2 24 inch lm delivered / 24W 3 36 inch lm delivered / 36.9W Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle 5 5 x 0.5 round paintable white canopy with 3 grippers (covers junction box) POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
16 THIN System Product Guide 16 TECHNICAL THIN Primaries Square Suspension 24in nominal - 27in overall [68.6cm] 36in nominal - 39in overall [99.1cm] 24 - max. 116in [292.1cm] 36 - max. 114in [294.6cm] Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available lm delivered / 32W lm delivered / 49.2W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING (4) 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
17 THIN System Product Guide 17 BUILD A SPECIFICATION THIN Primaries Square Suspension SERIES FINISH CONFIGURATION SEGMENTS COLOR TEMP JPR-THES SQR - X X R 5 SAMPLE SKU: JPR-THES-01-SQR-3-30-F-R5G Satin Brass, 36 segments, 3000K, frosted lens, remote 96W Lutron power supply OR 3 REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 2 24 inch lm delivered / 32W 3 36 inch lm delivered / 49.2W Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle 5 5 x 0.5 round paintable white canopy with 4 grippers (covers junction box) POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase dims to 5%, 120 VAC J Standard 60W - TRIAC/Forward Phase dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input H Lutron 96W Remote - UL Listed, 3-wire/Ecosystem dims to 0.1%, VAC input note: for VAC input, Lutron 3-wire/Ecosystem dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
18 THIN System Product Guide 18 TECHNICAL THIN Primaries Triangle Surface Mount 24in nominal in [69.3cm] 36in nominal -40.3in overall [102.4cm] Standoff Options 7.1in [180mm] 3.5in [90mm] 1.9in [45mm] 1.2in [3.0cm] Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available lm delivered / 24W lm delivered / 36.9W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Remote driver only Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING Wall brackets mount directly to drywall Optional junction box cover plate available 2 X 18AWG in-wall rated cable recommended for remote installation GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
19 THIN System Product Guide 19 BUILD A SPECIFICATION THIN Primaries Triangle Surface Mount SERIES FINISH CONFIGURATION SEGMENT STANDOFF COLOR TEMP JPR-THEW TRI - X X X SAMPLE SKU: JPR-THEW-01-TRI C-RXH Satin Brass, (3) 36 segments, 3000K, 90 mm standoffs, clear lens, remote 96W Lutron power supply 2 OR 3 LOCAL/REMOTE HARDWARE POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply Location - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician P Plug-In Power Supply - fixture connects directly into wall via electrical cord and wall plug. 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 2 24 inch lm delivered / 24W 3 36 inch lm delivered / 36.9W Contact Juniper for custom segment lengths STANDOFF LENGTH mm Standoffs - for undercabinet mm Standoffs - for general wall-wash and display mm Standoffs - for picture lighting COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle HARDWARE X no cover plate (for direct DC) POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase dims to 5%, 120 VAC J Standard 60W - TRIAC/Forward Phase dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input H Lutron 96W Remote - UL Listed, 3-wire/Ecosystem dims to 0.1%, VAC input note: for VAC input, Lutron 3-wire/Ecosystem dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
20 THIN System Product Guide 20 TECHNICAL THIN Primaries Square Surface Mount 24in nominal - 27in overall [68.6cm] 36in nominal - 39in overall [99.1cm] Standoff Options 7.1in [180mm] 3.5in [90mm] 1.9in [45mm] 1.2in [3.0cm] Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available lm delivered / 32W lm delivered / 49.2W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Remote driver required Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING Wall brackets mount directly to drywall Optional junction box cover plate available 2 X 18AWG in-wall rated cable recommended for remote installation GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
21 THIN System Product Guide 21 BUILD A SPECIFICATION THIN Primaries Square Surface Mount SERIES FINISH CONFIGURATION SEGMENTS STANDOFF COLOR TEMP JPR-THEW SQR - X X X SAMPLE SKU: JPR-THEW-01-SQR F-RXH Satin Brass, (4) 24 segments, 3000K, 45mm standoffs, frosted lens, remote 96W Lutron power supply 2 OR 3 LOCAL/REMOTE HARDWARE POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply Location - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician P Plug-In Power Supply - fixture connects directly into wall via electrical cord and wall plug. 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 2 24 inch lm delivered / 32W 3 36 inch lm delivered / 49.2W Contact Juniper for custom segment lengths STANDOFF LENGTH mm Standoffs - for undercabinet mm Standoffs - for general wall-wash and display mm Standoffs - for picture lighting COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle HARDWARE X no cover plate (for direct DC or plug-in) POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase dims to 5%, 120 VAC J Standard 60W - TRIAC/Forward Phase dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input H Lutron 96W Remote - UL Listed, 3-wire/Ecosystem dims to 0.1%, VAC input note: for VAC input, Lutron 3-wire/Ecosystem dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
22 THIN System Product Guide 22 TECHNICAL THIN Multiples Dyad (Vertical) 3.5in [9cm] 0.5in [1.2cm] segment 0.7in [1.7cm] connector 24in and 36in Light Segments may be combined in the same fixture Standard max length per fixture is (3) 36 Light Segments 110.8in [281.5cm] For longer runs, please contact Juniper Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available 24 segment 1200 lm delivered / 16W 36 segment 1840 lm delivered / 24.6W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
23 THIN System Product Guide 23 BUILD A SPECIFICATION THIN Multiples Dyad (Vertical) SERIES FINISH CONFIGURATION SEGMENTS COLOR TEMP JPR-THES M D V R SAMPLE SKU: JPR-THES-01-MDV F-LXA Satin Brass, (3) 36 segments, 3000K, frosted lens, local 40W Standard power supply (3 X 9.4W = 28.2W total) SAMPLE SKU: JPR-THES-02-MDV C-R5F Black Oxide, (1) 24 segment, (1) 36 segment, 2700K, clear lens, remote 40W Lutron power supply with 5 canopy REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 16.0W 3 36 inch segment lm delivered / 24.6W note: each digit represents a single segment, e.g. 323 is (1) 24 segment and (2) 36 segment Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle 5 5 x 0.5 round canopy (covers junction box) X no canopy POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase Dims to 5%, 120 VAC B Standard 20W - TRIAC/Forward Phase Dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem Dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
24 THIN System Product Guide 24 TECHNICAL THIN Multiples Dyad (Horizontal) 0.5in [1.2cm] segment 0.7in [1.7cm] connector 5.5in [9cm] 24in and 36in Light Segments may be combined in the same fixture Standard max length per fixture is (3) 36 Light Segments 110.8in [281.5cm] For longer runs, please contact Juniper Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available 24 segment 1200 lm delivered / 16W 36 segment 1840 lm delivered / 24.6W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
25 THIN System Product Guide 25 BUILD A SPECIFICATION THIN Multiples Dyad (Horizontal) SERIES FINISH CONFIGURATION SEGMENTS COLOR TEMP JPR-THES M D H R SAMPLE SKU: JPR-THES-01-MDH F-LXA Satin Brass, (3) 36 segments, 3000K, frosted lens, local 40W Standard power supply (3 X 9.4W = 28.2W total) SAMPLE SKU: JPR-THES-02-MDH C-R5F Black Oxide, (1) 36 segment, (1) 24 segment, 2700K, clear lens, remote 40W Lutron power supply with 5 canopy REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 16.0W 3 36 inch segment lm delivered / 24.6W note: each digit represents a single segment, e.g. 323 is (1) 24 segment and (2) 36 segment Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle 5 5 x 0.5 round canopy (covers junction box) X no canopy POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase Dims to 5%, 120 VAC B Standard 20W - TRIAC/Forward Phase Dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input note: for VAC input, Lutron 3-wire/Ecosystem Dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements
26 TECHNICAL THIN Multiples Triad THIN System Product Guide in [1.2cm] segment 0.7in [1.7cm] connector 5.5in [9cm] 24in and 36in Light Segments may be combined in the same fixture. Standard max length per fixture is (2) 36 Light Segments 75in [190.5cm] For longer runs, please contact Juniper. Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available 24 segment 1800 lm delivered / 24W 36 segment 2760 lm delivered / 36.9W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
27 THIN System Product Guide 27 BUILD A SPECIFICATION THIN Multiples Triad SERIES FINISH CONFIGURATION SEGMENTS COLOR TEMP JPR-THES M T R R SAMPLE SKU: JPR-THES-01-MTR F-L5A Satin Brass, (2) 36 segments, 3000K, frosted lens, local in-canopy 40W Standard power supply (3 X 9.4W = 28.2W total) SAMPLE SKU: JPR-THES-02-MTR C-RXF Black Oxide, (1) 36 segment, 2700K, clear lens, remote 40W Lutron power supply REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 24W 3 36 inch segment lm delivered / 36.9W note: each digit represents a single segment, e.g. 023 is (1) 24 segment and (1) 36 segment Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle 5 5 x 0.5 round canopy (covers junction box) X no canopy POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase dims to 5%, 120 VAC J Standard 60W - TRIAC/Forward Phase dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input H Lutron 96W Remote - UL Listed, 3-wire/Ecosystem dims to 0.1%, VAC input note: for VAC input, Lutron 3-wire/Ecosystem dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
28 TECHNICAL THIN Multiples Tetrad THIN System Product Guide in [1.2cm] segment 0.7in [1.7cm] connector 4.7in [12cm] 4.7in [12cm] Double configuration only available in 24in segments. Standard max length per fixture is (2) 36 Light Segments 75in [190.5cm] For longer runs, please contact Juniper. Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Ceiling Gripper 0.5in dia Remote Driver Canopy 5in dia x 0.5in ILLUMINATION 3000K and 90CRI standard 2700K and 4000K options available lm delivered / 32W lm delivered / 49.2W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 24VDC output Class 2 constant voltage driver 120VAC input voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated DIMMING TRIAC/Forward Phase/Leading-edge Juniper recommends Lutron DVCL- 253P dimmers See Power Supply section for details Contact Juniper for alternate requirements MOUNTING 9.8ft (3m) 1/16 aircraft cable, field adjustable 16.4ft (5m) Clear-jacketed 22AWG side-by-side silver, field adjustable SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
29 THIN System Product Guide 29 BUILD A SPECIFICATION THIN Multiples Tetrad SERIES FINISH CONFIGURATION SEGMENTS COLOR TEMP JPR-THES M T E R SAMPLE SKU: JPR-THES-01-MTE F-L5A Satin Brass, (1) 36 segment, 3000K, frosted lens, local in-canopy 40W Standard power supply (3 X 9.4W = 28.2W total) REMOTE CANOPY POWER SUPPLY CODE DEFINITIONS LOCAL/REMOTE (POWER SUPPLY LOCATION) R Remote Power Supply - separately located near fixture in accessible location, connected via low-voltage Class 2 wiring supplied by electrician, use 5 5 x 0.5 round canopy CANOPY 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 32W 3 36 inch segment lm delivered / 49.2W (not available in double configuration) note: each digit represents a single segment, e.g. 022 is (2) 24 segments. Contact Juniper for custom segment lengths COLOR TEMPERATURE K K K C Clear - 40 degree beam angle F Frosted - 90 degree beam angle 5 5 x 0.5 round canopy (covers junction box) X no canopy POWER SUPPLY - 24VDC CV OUTPUT A Standard 40W - TRIAC/Forward Phase dims to 5%, 120 VAC J Standard 60W - TRIAC/Forward Phase dims to 5%, 120 VAC note: for best dimming, Standard drivers should be matched to total fixture wattage. Standard drivers are ETL Listed, for remote use enclosure F Lutron 40W Remote - UL Listed, TRIAC/Forward Phase Dims to 1%, 120 VAC input H Lutron 96W Remote - UL Listed, 3-wire/Ecosystem dims to 0.1%, VAC input note: for VAC input, Lutron 3-wire/Ecosystem dimming drivers available (up to 96W) X No power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements Project Type Notes
30 TECHNICAL THIN Shared Task Lamp THIN System Product Guide 30 19in [48.5cm] 1.75in [4.4cm] cutout for fixture 12in max [30.5cm] 2in [5.1cm] cutout for toggle 1.2in [3.0cm] 21in [53.3cm] Light Segments may be combined in the same fixture Standard max length per fixture is (3) 24 Light Segments 75in [190.5cm] For longer runs, please contact Juniper Clear Lens 40 degree beam angle Frosted Lens 90 degree beam angle Plug-in Power Supply with on/off toggle switch (12W and 36W options available) ILLUMINATION 3000K and 90CRI standard 24 Segment 600 lm delivered / 8.0W 78 lm/watt with clear acrylic lens 50,000 hrs LED life L80 POWER 120VAC Input Voltage 12VDC Class 2 Constant Voltage Contact Juniper for alternate inputs Satin Brass, Black Oxide, Satin Nickel MATERIALS Solid brass, PMMA acrylic CERTIFICATIONS cul Damp Location Rated SYSTEM RUN Limited by driver wattage only GENERAL INFORMATION Designed by Peter Bristol & Juniper Assembled in USA
31 THIN System Product Guide 31 BUILD A SPECIFICATION THIN Shared Task Lamp SERIES FINISH SEGMENTS STANDOFFS COLOR TEMP JPR-THET SAMPLE SKU: JPR-THET C-RXC Satin Brass, (1) 24 segment, 90mm standoffs, 3000K, clear lens, remote 12W power supply POWER SUPPLY CODE DEFINITIONS C Clear - 40 degree beam angle F Frosted - 90 degree beam angle POWER SUPPLY G 12VDC 36W Plug-in Power Supply 01 Satin Brass 02 Black Oxide 03 Satin Nickel SEGMENTS 0 no segment 2 24 inch segment lm delivered / 8.0W X no power supply Juniper recommends Lutron DVCL-253P dimmers Contact Juniper for alternate dimming requirements note: each digit represents a single segment, e.g is (2) 24 segments Contact Juniper for custom segment lengths STANDOFF LENGTH mm Standoffs COLOR TEMPERATURE K K K Project Type Notes
32 FREQUENTLY ASKED QUESTIONS THIN System Product Guide 32 Are there more custom options that what is listed in this product guide? Our products have the ability to be highly customized to fit any setting or electrical need. If you have needs outside the product specifications or need to adjust the product for compatibility with your space, please contact us. Do you offer trade discounts? We are proud to support the industry by offering trade discounts to professionals. To join our trade program, and attach your tax ID or resale certificate. Once you are approved, you ll receive our standard trade discount with volume pricing breakdowns too. Do you have a showroom? Yes! Our showroom is located in Brooklyn, New York. We ask that you call to schedule an appointment in advance. One of our sales representatives will guide you through our product line and answer your questions. How do I get my order as quickly as possible? Since we receive machined parts from a third party and assemble all products in our Brooklyn design studio, lead times can vary depending on your order. Here are 3 ways to avoid further delays outside of our provided lead time: 1. Place your order quickly. To ensure that you will receive fixtures within your project s time constraints, we encourage placing your order as soon as possible. 2. Put a 50% deposit down, or pay in full. Our policy to begin prduction starts with a 50% deposit. Fixtures will only be shipped after the remaining balance of your order has been received. 3. Stay in touch with us. Should there be any changes to our production schedule or any early shipments, you will be contacted by Juniper as a standard practice. Make sure our s don t get tucked away in a SPAM folder in case we re trying to reach you, or save our number in your contacts to know when we re calling! How do I contact Juniper? Our hours are 9AM - 5PM EST, Monday - Friday. During these hours, you can either us (info@juniper-design.com) or call us directly ( ). s after hours are usually addressed within 24 hours.
33 CARE & UPKEEP INSTRUCTIONS THIN System Product Guide 33 Like other natural metals, brass will patina over time, with the natural yellow hues intensifying over time. Juniper protects its brass with a mild matte lacquer to delay coloration of the metal, and to protect it from exposure to humidity and natural oils. In order to remove dirt, dust and fingerprints; gently wipe the lamp with a damp cloth. Do not use any chemical cleaning solutions; especially those containing ammonia, as this will damage the surface finish of the brass. Do not drop or apply excessive force on any part or joint of the lamp. Do not attempt to disassemble or modify it in any way except for recycling. Do not use the lamp for any purpose other than its intended use. Use indoors only. Please contact us should the lamp not operate as described, and we will be happy to assist you.
34 rd Street, Unit 11 Brooklyn, NY 11232
Modular & linear architectural lighting for residential and commercial environments.
THIN Lighting System Modular & linear architectural lighting for residential and commercial environments. 2 THIN System Product Guide AP P L I CATI O NS : S U S PE N S IO N Office Lighting Suspended Task
More informationPRELIMINARY 2000K PERFORMANCE. CRI Lumen Maintenance Binning Tolerance Warranty
5005332 CLOSET RATED NITELIGHT CLOSET ROD provides even illumination of clothing in a closet while serving as a sturdy and attractive clothes hanging solution. While all necessary accessories for mounting
More informationLINKABLE UNDERCABINET
Date: LINKABLE NK UNDERCABINET Model: SWWC10 Available in frosted lens SWWC10A (SWWC10 with ON/OFF switch) SWWC10D with Built-in Touch dimmer) Size Cambered Linear LED Light is perfect for installation
More informationLIGHT CHANNEL TRIM 1.6
2.75" (7cm) 0.75" (1.3cm) 12.5" - 120.5" (31.8cm - 306.1cm) 0.75" (1.3cm) 0.63" (1.6cm) 0.2" (0.5cm) 2.6" (6.6cm) Power Feed Junction Box Constraint Clip 2" (5.1cm) DESCRIPTION Light Channel Trim 1.6 provides
More informationWARRANTY LED ECO PANEL.
LED ECO PANEL www.trulygreensolutions.com 8 MODELS AVAILABLE IN 25W TO 72W EXPECTED LIE OVER 50,000 HRS Compatible Emergency Battery Backup Available eatures 5 YEAR Suitable or Damp Location Use IES ILES
More informationBAS SFP22 Edge-lit LED Panel
Project Name Fixture Type Catalog # BAS SFP22 The ultra-thin, edge-lit LED panel (BAS SFP22) series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices,
More informationLIGHT CHANNEL.3 SURFACE MOUNT COMPLETE FIXTURE
0.35" (0.9cm) 0.7" (1.8cm) 0.06" (0.2cm) 12.94" - 120.94" (32.9cm - 307.2cm) 0.06" (0.2cm) 0.37" (0.9cm) 0.7" (1.8cm) 0.7" (1.8cm) 0.56" (1.4cm) 12.94" - 120.94" (32.9cm - 307.2cm) 0.56" (1.4cm) Features
More informationSurface Mount Series Luminaires
Surface Mount Series Luminaires Product Family Overview Surface Mount SURFACER1A/025120T827/14S/WH Specifications UNV Wattage: 16W, 25W Dimensions: 11 Diameter 14 Diameter Lumens: Up to 1600 lm CCT: 2700K,
More informationDHL-LP-LED Low Profile LED Linear High/Low Bay
Job Information Type: Catalog #: Project: Comments: Prepared by: WARRANTY WARRANTY YEAR TEN INCLUDES LABOR ALLOWANCE 2 65W/90W Version 23.81 2 135W Version For 4 dimensions see pg 2 23.81 23.81 23.81 12.6
More informationlight ACL9 ANATOMY PERIMETER FOCUSED INSTALLATION SLEEK & STRONG
ACL9 ACL9 ANATOMY SLEEK & STRONG A stylish rectilinear aluminum extrusion made of 60% recycled material provides ultimate durability and functionality. 3.325 2.25 0.63 PERIMETER FOCUSED INSTALLATION A
More informationLED ROUND MINI PANELS
Our ASD LED Round Mini Panel is a cutting-edge choice for indoor lighting for both residential and commercial applications. This round lit mini panel features low energy consumption, a year warranty and
More informationLIGHT CHANNEL 45 COMPLETE FIXTURE
0.77" (2cm) 0.27" (0.7cm) 0.8" (2cm) 0.5" (1.3cm) 12.85" - 120.85 (32.6cm - 307cm) 0.5" (1.3cm) 0.9" (2.3cm) eatures & Benefits Light Channel 45 Degree is a slim profile channel, made to order as a complete
More information12 inches to 120 inches
micro grazer light channel 7W or 4.4W, 24vdc Commercial (85+, 92+, 95+cri) 12 inches to 120 inches.80" (2cm).79" (2cm).68" (1.7cm) 0.9" (2.3cm) LCMG7 Warm White (4ft) with 10º Clear Lens Distance 12in
More informationZipTwo LED 707. Micro-profile interior direct lighting for open office, wall wash and wall graze applications. Spec Guide
Adaptive architectural lighting systems Type Project Spec Guide ZipTwo LED 707 Micro-profile interior direct lighting for open office, wall wash and wall graze applications. Benefits & Features Ultra low
More informationLED Lights & Parts. World of LED Lights. Product Catalogue 2017 Vol 2. STORE ADDRESS 3695 E 1st Ave, Vancouver, BC V5M 1C2
LED Lights & Parts World of LED Lights Product Catalogue 2017 Vol 2 STORE ADDRESS 3695 E 1st Ave, Vancouver, BC V5M 1C2 WEBSITE https://lightsandparts.com PHONE NUMBER Tel: (4) 559-5000 Toll Free : 1(888)
More informationRunning Magnet 2.0 Suspension Down High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
More informationProduct Specifications MaxLumen MRI LED Diffused Lighting
NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model MXLumen22-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 2x2 light fixture
More informationRunning Magnet 2.0 Suspension Up&Down High-tech LED lighting system for interior architecture
Description RECESSED SURFACE SUSPENSION UP & DOWN Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned
More informationLED RETROFIT CONVERSION KITS
Our LED RetroFit Conversion Kits come with a complete Gear Tray Assembly to convert older 4-foot and 8-foot T8 or T12 strip-type fixtures into energy efficient LED luminaires. High quality components and
More informationProduct Specifications MaxLumen MRI LED Diffused Lighting
NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model NEA-MXLumen14-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 1x4 light fixture
More informationLED ECO PANEL.
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. LED ECO PANEL www.trulygreensolutions.com
More informationFPLHB - Fidelux Premier Linear Highbay
FPLHB - Fidelux Premier Linear Highbay Product Description Fidelux LED Linear High Bays meet the challenging maintenance, safety, and performance requirements of industrial environments through an unbeatable
More informationSURFACE Spec Guide. up to 105 lm/w performance
SURFACE SURFACE Spec Guide up to 105 lm/w performance Performance based on 4 luminaire at 4000K @ 25 o C Calculated L80 at 80,000 hours Lumens per foot are delivered lumens Page 2 of 10 260.599.3590 orders@luxilluminaire.com
More informationCIRRUS CEILING WALL GRAZER WITH REMOTE POWER
0.9" (2.3cm) 0.13" (0.3cm) CIRRUS WALL GRAZER (ACTUAL SIZE) 0.9" (2.3cm) CIRRUS WALL GRAZER LENS (ACTUAL SIZE) DESCRIPTION Cirrus Ceiling Wall Grazer is a linear LED fixture that offers direct light in
More informationTRACK HEAD OR CEILING SUSPENDED, Elegant and fun design Machined Aluminium Trim for MH or MR16, Custom Aluminium Heat Sink for LED Multiple beam
Rolo TRACK HEAD OR CEILING SUSPENDED, Elegant and fun design Machined Aluminium Trim for MH or MR16, Custom Aluminium Heat Sink for LED Multiple beam Angle, rare earth magnet 2 Anatomy 350 180 ROLO MACHINED
More informationNOVA CEILING WALL GRAZER WITH REMOTE POWER
Clear Frosted Lens (Actual Size) Description Nova Ceiling Wall Grazer is a linear LED fixture that offers direct light in a clean, contemporary style. Nova is available in various increments from 12 to
More informationTHE HIGH STRIP FIXTURE SERIES PERFORMANCE KEY FEATURES INCLUDE: LED Fixture Series for General, Direct and Indirect Illumination
THE HIGH PERFORMANCE LED Fixture Series for General, Direct and Indirect Illumination KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade Aluminum
More informationRECESSED Spec Guide. up to 111 lm/w performance
RECESSED up to 111 lm/w performance Performance based on 4 luminaire at 4000K @ 25 o C Calculated L80 at 80,000 hours Lumens per foot are delivered lumens Page 2 of 10 260.599.3590 orders@luxilluminaire.com
More informationIvalo Lumaris LED Linear Lighting
Ivalo Lumaris LED Linear Lighting Luxury LED Linear Lighting by Ivalo Guaranteed Lutron control compatibility Smooth, continuous dimming from 100% to 0.1% with Soft-on Fade-to-Black options Diffused lens
More informationDIMMING 0-10V Continuous
Project Notes Type Date Cat. No. SLB XE Series Slim Linear LED High Bay DESCRIPTION The Aleo SLB XE G3 and SLB XE G3 ECO Series Slim Linear High Bay delivers industryleading performance with an extremely
More informationProduct Specifications MaxLumen MRI LED Diffused Lighting
NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model MXLumen22-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 2x2 light fixture
More informationLED SLIM DISKS PK613LED FIXED 3-LIGHT ROUND
HOUSING RING FOR SURFACE MOUNTING PK H600C (Sold separately) Aluminum Housing for surface mount. Dimensions: 2-7/18 Ø x 13/16 H Finish: SN Satin Nickel SPECIFICATIONS Model PK613LED-38-30 PK613LED-38-40
More informationLED RETROFIT CONVERSION KITS
Engineered Products Company s LED RetroFit Conversion Kits convert older 4-foot and 8-foot T8 or T12 strip-type fixtures into energy efficient LED luminaires. High quality components and attractive design
More informationNOVENTA NV3.5 Suspended, Surface, Wall, Recessed LED
NOVENTA NV3.5 LED Find additional images and information at alwusa.com/nv35 1. BASE MODEL NV3.5S 3.5 suspended L NV3.5D 3.5 suspended diamond NV3.5WD 3.5 wall, direct NV3.5WI 3.5 wall, indirect NV3.5SMB
More informationP Archie. Incandescent NAME: PROJECT: Diameter: 5-3/4 Height: 8-3/4 Overall ht. w/stem: 75
DATE: TYPE: NAME: PROJECT: Incandescent P5173-15 Archie One-light mini-pendant with finely crafted strap and knob details and double prismatic glass. Category: Pendants Finish: Polished Chrome (plated)
More informationIvalo Lumaris LED Linear Lighting
Ivalo Lumaris LED Linear Lighting High-quality, even lines of illumination and guaranteed LED compatibility with 1% Lutron dimming New! Diffused Lens Option Conceals LED hot spots and eliminates glare
More informationIvalo Lumaris. LED Linear Lighting. High quality, even lines of illumination and guaranteed LED compatibility with 1% Lutron dimming IVALO COLLECTION
Ivalo Lumaris LED Linear Lighting High quality, even lines of illumination and guaranteed LED compatibility with 1% Lutron dimming IVALO COLLECTION Overview Why Choose LEDs? LEDs make sense for today s
More informationTROFFER RETROFIT KIT (TRK)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TROFFER RETROFIT KIT (TRK) www.trulygreensolutions.com
More informationHighLINER 2. General Information: FOR YOUR SAFETY. Installation Guide for C1I75, L1C1I75, C2I75, L135C2I75
General Information: is intended for linear lighting in storerooms, walk-in coolers, indoor and outdoor soffits, outdoor canopies, car washes, and a variety of other lighting applications. Do not mount
More informationLED Ceilencio. Specifically designed for
LED Ceilencio by Specifically designed for Ceilencio Ceiling LED Ceilencio JLC-Tech, a pioneer for architecturally integrated LED lighting solutions, has teamed up with Decoustics, a custom ceilings manufacturer,
More informationHBEAM 1.25 PRE-DESIGNED HB1.25 PRE-DESIGNED STRAIGHT SECTIONS (2FT - 8FT)
HBEAM 1.5 PRE-DESIGED HB1.5 PRE-DESIGED STRAIGHT SECTIOS (FT - 8FT) PRE-DESIGED STRAIGHT SECTIOS 1.5" Aperture ft - 8ft straight sections Specify with linear light and/or spotlights LAMPIG LED - Direct
More informationIvalo Lumaris LED Linear Lighting
Ivalo Lumaris LED Linear Lighting High-quality, even lines of illumination and guaranteed LED compatibility with 0.1% Lutron dimming New! Hi-lume Premier 0.1% LED driver Diffused lens option conceals LED
More informationLED Linear Design Highlights
LED Linear Design Highlights Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade Aluminum and 9 (23cm) [min] of perimeter conductive surface. Multiple Color Options Three
More informationLIGHT CHANNEL.6 MILLWORK COMPLETE FIXTURE
0.74" (1.9cm) 0.5" (1.3cm) 0.88" (2.2cm) 0.81" (2.1cm) 1" (2.5cm) 12.73" - 120.73" (32.3cm - 306.7cm) 1" (2.5cm) 0.7" (1.8cm) 0.43" 12.73" - 120.73" (32.3cm - 306.7cm) 0.43" 0.43" 0.04" (0.1cm) 0.61" (1.5cm)
More informationLighting. Showroom Lighting Requirements. Introduction. Technology. Fixture and Performance
Showroom Lighting Requirements Introduction The Chevrolet Showroom Lighting Strategy is designed to assist the Dealer in reducing energy consumption through the use of high performance tested and approved
More informationLED Edge-Lit Flat Panels
ASD LED Edge Lit Flat Panels are modern cutting-edge fixtures with 13-up lm/w models made to DLC Premium specifications. Our Edge-lit panels are very rigid and measure only 1/2 thick making us one of the
More informationClaude Indirect Wall WALL
Overview Aesthetically pleasing design with no visible screws and a sleek cross section for minimal appearance (2 inch) One piece extruded aluminum housing with integral driver Indirect lighting only Continuous
More informationStep Lighting. For indoor and outdoor, stair and pathway applications. Juno Lighting Group Juno Step Lighting 1
Step Lighting For indoor and outdoor, stair and pathway applications Juno Lighting Group Juno Step Lighting 1 Lighting your way Table of Contents Mini LED Step Lights p. 4-9 Performance LED Step Lights
More informationDHL-LP-LED Low Profile LED Linear High/Low Bay
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards please read all warnings and instructions
More informationSuite: Foyer/Hallway/Closet PROJECT: ZIGG CONDOS TYPES ' S1 ' & ' S6 ' Description: Flush Mount lass. Finish: Diameter: " Height: 4" Lamp: x
Suite: Foyer/Hallway/Closet PROJECT: ZIGG CONDOS TYPES ' S1 ' & ' S6 ' Description: Flush Mount lass Finish: Diameter: " Height: 4" Lamp: x 352-(&7 =,** &21'26 7
More informationARCSYSTEM. Fully-dimmable LED lighting for auditoriums, retail and commercial installations
ARCSYSTEM Fully-dimmable LED lighting for auditoriums, retail and commercial installations BEAUTIFUL, DYNAMIC LIGHT Sharpening the Cutting Edge For four years, GDS has seen its installed into some of the
More informationThe only lighting product that is designed, approved, and patented to replace the cross members in a suspended grid ceiling system.
ECO by The only lighting product that is designed, approved, and patented to replace the cross members in a suspended grid ceiling system. JLC-Tech LLC Pembroke, MA - USA 781-826-8162 info@jlc-tech.com
More informationLamp: Average Lamp Life: 50,000 hours. 24VDC Power Supply (sold separately): PSB-4X96W VDC VAC input, 4x96 watt output
Ss2P Soft Strip 2.3W 24vdc high output, premium residential grade (84+cri) Maximum Length Before Refeeding: 40 Ft* LENGTH IN FEET TOTAL WATTAGE 1 3 LENGTH IN FEET TOTAL WATTAGE 21 49 Description: Premium
More informationwww.greenelectricalsupply.com FLATMAX LED FLAT PANEL: PERFORMANCE SERIES USER MANUAL INSTALLATION GUIDE FOR: 1X4: MLFP14DP4535 MLFP14DP4541 MLFP14DP4550 2X2: MLFP22DP4535 MLFP22DP4541 MLFP22DP4550 2X4:
More informationSOLID STATE ILLUMINATED RAIL
SOLID STATE ILLUMINATED RAIL Grand Park, Los Angeles California Lighting Design: The Lighting Design Alliance Installation: Rosendin Electric Manufacturer Representative: Performance Lighting Systems
More informationUSER MANUAL INSTALLATION GUIDE FOR: 2X2: MLFP22DS4035 MLFP22DS4041 MLFP22DS4050
DIRECT LIT LED FLAT PANEL: SAVER SERIES USER MANUAL by INSTALLATION GUIDE FOR: 1X4: MLFP14DS4035 MLFP14DS4041 MLFP14DS4050 2X2: MLFP22DS4035 MLFP22DS4041 MLFP22DS4050 2X4: MLFP24DS4235 MLFP24DS4241 MLFP24DS4250
More informationLamp: K K K K K K
Ss5C Soft Strip 4.4W 24vdc high output, commercial grade (85+ or 92+cri) Description: Commercial-grade 24 volt Soft Strip provides high levels of light with high CRI LEDs, offering superior color rendering
More informationLight. can be. LED Edge-Lit Flat Panel AWESOME
Light can be AWESOME ASD HAS A PERFECT SELECTION FOR INDOOR COMMERCIAL LIGHTING ASD LED Panels ASD LED Edge lit panels are the best choice for all recessed, suspended and surface mount applications. Available
More informationLamp: K K K K K K
Ss2C Soft Strip 2.5W 24vdc high output, commercial grade (85+ or 95+cri) SS2C-24V-_-30K Maximum Length Before Refeeding: 40 Ft* Description: Commercial-grade 24 volt Soft Strip provides high levels of
More information4 LED Recessed Adjustable. Energy efficient, stylish downlighting for residential and commercial applications
4 LED Recessed Adjustable Energy efficient, stylish downlighting for residential and commercial applications The most efficient, stylish, high-performance downlight is now adjustable Juno Generation 4
More informationPremium. Universal LED Vapor Tight T20G. Commercial lighting Industrial lighting Vapor tight light Linear High Bay Canopy
Universal LED Vapor Tight T20G Commercial lighting Industrial lighting Vapor tight light Linear High Bay Canopy E465485 Premium MULTI INSTALLATION WAYS TO SAVE YOUR LABOR COST. The T20G is a tri-proof
More informationThin-line LED Down Lights
Down Lighting Thin-line LED Down Lights Thin-line LED Down Lights are a breakthrough in LED downlight technology. Clever placement of 2835 LEDs around our diffusing glass lens provide brilliant and efficient
More informationHornet HP. Square Glass Downlight
Features The Hornet 3.5" helps define architectural spaces with a decorative, satin opal, etched glass cylinder that breaks the ceiling plane, providing a warm glow ideal for ambient and task lighting.
More informationProject: Comments: Prepared By: Control. Code Fixture & Trim D3 Wall Wash, Round. Platform & Control Wide Gamut, Tunable
Project: Comments: Prepared By: Tunable, fixture produces a wide range of 90+ CRI/R9 whites from 1400K-10,000K, as well as pastels and saturated colors Closed-loop color point maintenance to
More informationSOL CROSS SECTION. PENDANT Spec Guide. Page 2 of Rev. JUNE18-1
SOL PENDANT CROSS SECTION Page 2 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com SPECIFICATION Lux Illuminaire pairs long life name brand LED chips and boards to ensure the highest
More informationPRODUCT DATA SHEET LIGHTING PRODUCTS
EPCO s LED s are available in nineteen (19) configurations that are vapor tight, provide unparalleled performance, improved efficacy, more lumens per watt, and are the reliable, sustainable solid-state
More information3.75 Gyro Shift Multiples Single Head
CATALOG#: PROJECT: FIXTURE TYPE: CONTACT: PHONE: Wattage CCT Delivered Lumens Efficacy 10W 3000K 966lm 97lpw 15W 3000K 1437lm 96lpw 20W 3000K 1739lm 87lpw 25W 3000K 2049lm 82lpw 30W 3000K 2254lm 75lpw
More informationTechnical Application Guide for UP-SHINE LED Panel Light
Technical Application Guide for UP-SHINE LED Panel Light UP-PL66-36W-S3 Introduction Up-shine led panel adopts high lumen SMD LED with CRI >8. Top branded driver comes with triac dim, -1V dim and DALI
More informationFino Healthcare. Asymmetric Wall Mount Indirect LED
Fino Healthcare Asymmetric Wall Mount Indirect LED Features fiture is ideal for applications requiring a wipe down lens with no horizontal "shelf" surfaces. Designed with an integrated acrylic lens to
More information2200TD-3000TD Dim to Warm* 2700T-6500T Tunable White* *Must be ordered with D05 or DS5 Driver options; excludes 2' and 3' lengths
Fixture Type: Project Name: Ordering Guide Feature Code Options Description Program SAE SAE Program Series Mounting CC Concealed Cove Fixture Distribution AI Asymmetric Indirect Row Length (in feet) '
More informationSPECIFICATIONS HYLYTR. with DOUBLE SLOT OPTICS
HYLYTR with DOUBLE SLOT OPTICS (HYWG) Recessed, Perimeter, Mud-In LED MULTI-GRAZER (HYMG) Surface LED SHOWCASER (HYSC) Recessed, Suspended LED HYWGR HYMG HYSCS HYMG HYWGRP Find additional images and information
More informationEarthTronics products. About us. Where efficiency meets innovation. T5 & T8 Linear. Founded in 2007, EarthTronics, Inc. is a Michigan based
LED Product Guide About us EarthTronics products We are dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact for our customers.
More informationHornet HP. Round Glass Downlight
Round Glass Downlight Features The Hornet 3.5" Round Glass Downlight helps define architectural spaces with a decorative, satin opal, etched glass cylinder that breaks the ceiling plane, providing a warm
More informationIBLED SERIES 4' PROJECT: FEATURES AND SPECIFICATIONS LINE DRAWING
PAGE OF 5 MODEL: PROJECT: PREPARED BY: DATE: TYPE The IBLED series LED high bays are ideal for manufacturing, warehousing, commercial and industrial facility lighting applications. The superior design
More informationDimmable LED Retrofit Kit
ASD LED Recessed Retrofit Kit was designed as an energy-efficient lighting solution for remodeling or new construction projects. It is an ideal replacement for an incandescent lamp in the industry s most
More informationFULL BLEED APPLICATION SHOT RENDERING
FULL BLEED APPLICATION SHOT RENDERING ANATOMY SLEEK & STRONG A perfectly square aluminum extrusion made of 60% recycled material provides durable functionality in an elegant compact form. CORE CAPACITY
More informationRecessed LED Wall/Slot SAE 202
5/8" 5 7/16" 6 1/2" 2 5/8" 5/8" 6" 5 7/16" 1 11/16" Fixture Type: Project Name: Ordering Guide Feature Code Options Description Program SAE SAE Program Series Recessed Linear Wall/Slot Ceiling Type DW
More informationRECESSED - WITH StepLens OPTION
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K Flush shielding option Flush StepLens option Regressed NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.7 W/ft 19 lm/w 5 lm/ft 4.6 W/ft 18 lm/w
More informationTechnical Application LED Pendant Light LUZ-PL W-W
Technical Application LED Pendant Light LUZ-PL412-25W-W Introduction Pendant led light acts as a decorative light in most applications. Elegant design creates soft lighting effect, suspended installation
More informationEvolution EXWW RECESSED LINEAR WALL WASH LUMINAIRE
Evolution EXWW Project Name Date Type RECESSED LINEAR WALL WASH LUMINAIRE 3-13/16 (96.8mm) 5-1/8 (130.2mm) Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing Highly reflective,
More informationWho is Iconic LED? Page 2. Phone:(337)
Who is Iconic LED? At Iconic LED our mission is to be an icon in the lighting industry by providing excellent customer service, and quality products through a traditional distribution model focused on
More informationCHINESE NEW YEAR DEADLINE SOLUTIONS
LED MADE-TO-ORDER CHINESE NEW YEAR DEADLINE SOLUTIONS Past the mid-october 17 large project deadline for deliveries required before April, 2018? Have an order between November and March and need it faster?
More informationProject Name. Date. Cat. Number. Type
Linear Series 2.0 LED linear luminaires and retrofit linear kits The Linear Series delivers ultra-long life and high efficacy. Fixtures can be installed independently or joined together for continuous-run
More informationDRD5S & SurfaceFrame Alt/EM 18" Linear Surface Mount LED Area Light
DRD5S & SurfaceFrame Alt/EM 18" Linear Surface Mount LED Area Light Project: Product Code: Type: Date: Spec Sheet V- 04.15.19 Maintains all the standard SurfaceFrame ratings Offers enhanced dimming protocol
More informationSPECIALTY LIGHTING NOTES: A Canadian Manufacturer
SDL SERIES LED SLIM DOWNLIGHT SDL series 4 & 6 Energy Star IC rated dimmable slim downlight. Designed to fit under studs and in narrow plenums, insulated, drop ceilings and soffits. 5, hour L7 rated lifetime.
More informationNATELA 5. Based on 30 PRODUCT SPECIFICATIONS PRODUCT FEATURES PHOTOMETRIC DATA LIGHT DISTANCE CURVE 22W LINEAR WALL WASHER
NATELA 5 22W LINEAR WALL WASHER This 22W linear wall washers reveals superior craftsmanship and a slim design, perfect for highlighting building facades and landscape walls (Also Available in RGB). PRODUCT
More informationThe Urban Farmer Store
& The Urban Farmer Store June 7th, 2018 WAC Landscape Lighting The Technology Advantage Before LEDs From torches to filaments Heavy loads and short lives PG&E and lamp manufacturers were the winners Never
More informationNew Linear Series DISCONTINUED
OVERVIEW / SPECIFICATION EcoSpec Linear INT Warm Cove - is designed with a slim profile and integral brackets with 180 vertical rotation adjustability. Warm Cove Series color temperatures of 2300K and
More informationS = 1120 Long. M = 1400 Long. L = 1680 Long
MATRIX Matrix is part of Luxxbox s acoustically rated pendant series. This rectangular array of cleverly interconnected acoustic panels, adds both visual appeal and function to the space. Available as
More informationMEDLEY A. RoHS COMPLIANT INTERIOR - INTEGRAL POWER SUPPLY WHITE LIGHT & STATIC COLORS SHAPING THE EXPERIENCE OF LIGHT
LINE VOLTAGE LED, INTERIOR LINEAR LIGHTING Ideal for ceiling and wall washes Integral power (line voltage 120V 277V) Wireless DMX capability Field installable accessories LIGHT SOURCE 3.5W/FT, 7W/FT, 11W/FT,
More informationFLEX. Innovative lighting engineered for seamless integration into the DESIGNFlex ceiling system by
by Innovative lighting engineered for seamless integration into the DESIGNFlex ceiling system by JLC-Tech LLC Pembroke, MA - USA 781-826-8162 info@jlc-tech.com www.tbarflex.com The JLC-Tech, a pioneer
More informationGrüv Flare Regressed. Recessed Linear LED
Grüv Flare Regressed Features The Gruv Flare Regressed fixture provides high-performance, visually comfortable, high efficient ambient lighting. Designed with a regressed lens and a flared aperture, the
More informationBIANCO SENSOR FLUSH MOUNT 15W MODEL # GBCL400HFSR
BIANCO SENSOR FLUSH MOUNT 15W MODEL # GBCL400HFSR DESCRIPTI & FEATURES With High Frequency Occupancy On/ Off Sensor ; HF System: 5.8GHz±75MHz, ISM wave band Sensor Power consumption : 0.5W(- standby);
More informationProduct Specifications
//206 00 VLN0 Product Specifications Nastro LED High Bay W Nastro LED High Bay EO-LN- EO-LN-T EO-LN-HV EO-LN-HVT Linear Design System Light Efficacy LPW Easy Installation & Maintenance IP6/ IP30(PIR) Five
More informationMax 4 Flush Lens RECESSED
Overview Flush 4 inch LED linear snap-in lens Sleek, slender contemporary design Easy to install T-Grid, S-Slot Grid, Tech Zone Ready Special - no light leak ends feature Ordering Format PART NUMBER: MX4-F
More informationWARRANTY LED ECO PANEL.
ED ECO PANE www.trulygreensolutions.com ED ECO PANE 7 MODES AVAIABE IN 30W TO 75W EXPECTED IE OVER 50,000 HRS IES IES @ www.trulygreensolutions.com Compatible Emergency Battery Backup Available eatures
More informationipanel LED Panel Light
ipanel LED Panel Light -replacement for fluorescent luminaires, with dimming and emergency A U S T R I A TUV-CE (EMC) TA380130384 TUV-CE (LVD) TA380130310. Ordering ipanel-xxxx-aa-bb-ccc XXXX= size 6060
More informationData Sheet Version 1.0
LED Modules - Dim To Warm Round Power of Luminus in standard and custom LED modules Data Sheet Version 1.0 Lean & Fast. Made Smarter. Design Faster use standard modules to shorten development time Easy
More informationTechnical Application. Guide for LDN-PL W LED Panel Light LDN-PL W-A LDN-PL W-A-D
Technical Application Guide for LDN-PL-5W LED Panel Light LDN-PL-5W-A LDN-PL-5W-A-D Introduction Featuring louver reflectors design technology, PL-A panel light offers the ideal combination of stylish
More informationUnder Cabinet Lighting
Under Cabinet Lighting 2016-2017 2016 SMW 101 6 SELF Electronics Co.,Ltd. (Ningbo, China) SELF Electronics USA Corporation (Atlanta, USA) SELF Electronics Germany GmbH (Cologne, Germany) SELF Electronics
More information