Inspection Records Schedule- Fire Extinguisher

Transcription

1 CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT PHASE 3: Task 1 Inspect & Test Fire Extinguishers Conduct a 6 monthly inspection on at least 4 portable fire extinguishers in the workplace in accordance with AS1851. Provide evidence of your work: a. list the inspection tasks as per AS1851 on the table provided; and b. provide a copy of the AS1851 maintenance log sheet; and c. provide a photo of each of the extinguishers that you have inspected. The photo must also show any signage related to the extinguisher. This assessment task satisfies the knowledge and skills required to demonstrate competence in the following competency unit: CPPFES2020A Conduct routine inspection & testing of fire extinguishers & fire blankets This task may be completed in a simulated environment. a. TASK SCHEDULE Inspection Records Schedule- Fire Extinguisher Item Action required & pass fail requirement Six-monthly Yearly 5-yearly Accessibility Check that the extinguisher is conspicuous, readily accessible & in its assigned location Version: 2015.WP.1 Issued: 01/01/2015 1

2 Inspection Records Schedule- Fire Extinguisher (cont) Item Action required & pass fail requirement Six-monthly Yearly 5-yearly

3 CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT b. MAINTENANCE LOG SHEET QBSA Lic NO. JOB NO. DELTRA AUSTRALIA Record of Service Fire Extinguisher ABN: SITE NO. SITE NAME: Unit no. Unit type Last P/T Make Size Rating Location of Equip LEVEL SERVICE PASS/ FAIL COMMENTS 1 FOAM 2007 W 9.0 6A-80B-E REAR EXIT GRND LEVEL 1 P NO PRESSURE IN GAUGE ANNUAL SITE SURVEY COMPLETED YES NO ALL EQUIPMENT SERVICED TO AS 1851 REQUIREMENTS DATE : TECH NAME (Print): TECH SIGNATURE: SERVICE COMMENTS : Version: 2015.WP.1 Issued: 01/01/2015 3

4 CPP20511 Certificate II in Fire Protection Inspection & Testing Monthly Activity Log & Summary Task: You are required to complete a log of activities that you have completed this month relating to the CPP20511 course. A separate log must be kept for each month. Activities include: Installing fire extinguishers and/or fire blankets* Inspecting and testing fire extinguishers, fire blankets, fire hose reels, fire hydrants and/or emergency and exit lighting* Preparing work method statements, work plans or schedules, risk assessments etc Professional reading/further research on topics covered in the CPP20511 course All activities must be recorded on this template. Add additional log pages as required. You must also complete the monthly activity summary which is to be submitted with your activity log. The instructions for the summary are provided following the activity log. * Reminder: If you are doing this work in Queensland, you must be under personal supervision of an appropriately qualified person. Student Name: (Please print) Student Signature: Month of Activity: To be completed by Assessor Assessment: Activities Acceptable Activities Not Acceptable Assessor Name: Assessor Signature: (Please print)

5 Date Activity Work Tasks Performed Supervised? Initials Yes No

6 Date Activity Work Tasks Performed Supervised? Initials Yes No

7 CPP20511 Monthly Summary Task: You are required to select ONE activity that you have completed this month. This can be any activity from your workplace tasks or your monthly diary. Write a report on all aspects of that activity using the outline provided. Your report can be in dot-point format. Your summary may be hand-written on the template provided or completed in an electronic format using the headings provided and printed. Hand-Written Guidelines: Hand-written summaries must be legible, or the assessment will be returned. It is recommended that you print the pages single-sided. This will allow you to continue writing on the back of each page if you run out of space. Add more pages if you require additional space, but make sure that you record the topic number and title on each additional page (eg. 1. Work Health and Safety ) Workplace Assessment PHASE of 6 (insert phase number) Student Name: Student Signature: Activity Performed: Date Activity Performed: Location of Activity Performed: Was the activity supervised? YES NO Supervisor s Name (if applicable): Was the activity performed in the workplace, or was it simulated? Workplace Simulated * Reminder: If you are doing this activity in Queensland, you must be under personal supervision of an appropriately qualified person.

8 1. Health & Safety Consider: Risk assessment of work area Hazards, risks, controls Work method statements Safety signs, site safety plans Personal protective equipment Communication and procedures for reporting OHS issues Participation in OHS training

9 2. Manual Handling Consider: Assessing hazards and risks of movement paths and safe working loads Interpreting safety signs Dangerous Goods requirements Manual handling techniques Preventing ODS & SGG emissions

10 3. Legislation & Standards Consider: Building Code of Australia Relevant Australian Standards State/Territory legislation Importance of applying legislative requirements Implications of not applying legislative requirements

11 4. Organisational Requirements Consider: Organisational documentation Communication and reporting Organisational policies and procedures

12 5. Client Service and Quality Consider: Customer service Problem-solving Client confidentiality Communication Company client service standards, code of conduct, complaints handling procedures Range of company products and services The relevance of client service, good communication and your own role in delivering effective client service Quality control methods, including completing documentation

13 6. Work Organisation Write a list of each step that you undertook to complete this activity. Include steps such as: Receiving work order Organising resources (equipment, products) Scheduling time, making appointments, planning activity Practical steps undertaken [eg. Selected correct hardware (screws, drill, extinguisher bracket), measured correct installation height, screwed extinguisher bracket to wall, checked height again etc]