General Specifications

Transcription

1 General Specifications Models AFS0S, AFS0D AFG0S, AFG0D Field Control Unit Duplexed Field Control Unit (for FIO, 19" Rack Mountable Type) R GENERAL This GS covers the hardware specifications of the Field Control Unit (FCU) which is the processor of the Field Control Station (FCS). HARDWARE SPECIFICATIONS For the installation specifications and the environmental conditions common to the systems, refer to System Overview (GS Q01B10-1E). Processor VR542 (1 MHz) Main Memory Capacity AFS0S, AFS0D: 16 Mbyte AFG0S, AFG0D: 2 Mbyte Memory Protection During Power Failure Battery 4 Back-up for Main Memory: Max. 72 hours Battery Recharge Time: Min. 48 hours FCU Status Contact Output 2 terminals (NC, C) Contact Points open during FCU failure Contact Rating: 0 V DC, max. 0. A Communication Interface V net Interface: Dual-redundant ESB bus interface: Dual-redundant or Single No. of Node Units Connectable Local Node units: Max.10/FCU Remote Node units: Max. 9/FCU Max. 8/ER Bus When both Local and Remote Node units used: Max.10/FCU However, when using Remote Node Expanded FCS database type at FCU model AFG0S or AFG0D, No. of Node comes to be shown below. Local Node units: Max.10/FCU Remote Node units: Max.14/FCU Max. 8/ER Bus When both Local and Remote Node units used: Max.15/FCU [19" Rack Mountable Type FCU] F01E.EPS Power Supply (specify with ) Voltage: V AC, Frequency: 50/60 Hz Voltage: V AC, Frequency: 50/60 Hz Voltage: 24 V DC Power Consumption V AC: 250 VA (AFS0S, AFG0S) 400 VA (AFS0D, AFG0D) V AC: 250 VA (AFS0S, AFG0S) 410 VA (AFS0D, AFG0D) 24 V DC: 4.5 A (AFS0S, AFG0S) 8 A (AFS0D, AFG0D) Weight Approx. 20 kg (AFS0S, AFG0S) Approx. 25 kg (AFS0D, AFG0D) Mounting 19" Rack Mounting: Rack mount (M5 8 screws) Insulation bush (accessory) Connection Power Supply: M4 screw terminal connection Grounding: M4 screw terminal connection Contact Output: M4 screw terminal connection Yokogawa Electric Corporation 2-9-2, Nakacho, Musashino-shi, Tokyo, Japan Tel.: Fax.: Copyright Jan th Edition Apr.01,2005

2 ESB Bus CN1 MODEL AIP52 STYLE1 SI YOKOGAWA RCV SND-L SND-R REVISION U H1 H2 ESB Bus CN1 MODEL AIP52 STYLE1 SI YOKOGAWA RCV SND-L SND-R REVISION U H1 H2 <<Contents>> <<Index>> 2 The FCS consists of the FCU and Node Units, and the ESB bus or the ER bus to connect them together. FCU Dual-redundant Vnet Dual-redundant ESB bus Maximum of 10 Nodes Local Node 1 Local Node 2 Local Node 9 Dual-redundant ER bus Remote Node 1 I/O signal connection F02E.EPS Regulatory Compliance For the detailed information of following standards, see Integrated Production Control System CENTUM CS 000 System Overview (GS Q01B10-1E). Safety Standards [CSA] (for V AC power supply) [CE Mark] (for V AC power supply) EMC Conformity Standards [CE Mark] (for V AC and 24 V DC power supply) [C-Tick Mark] (for V AC and 24 V DC power supply) Mar.1,200-00

3 EXTERNAL DIMENSIONS Unit: mm *262 *22 * (7.7) Hole for 19" rack mounting (8 M5 screw holes) 7.7 F0E.EPS The rack mounting bracket can be mounted where marked *. When ordering models AFS0S/AFS0D/AFG0S/AFG0D only, the bracket is shipped mounted in the 168 mm position. Sep.25,

4 4 MODELS AND SUFFIX CODES Field Control Unit (19 Rack Mountable Type) Model AFS0S Field Control Unit (for FIO, for 19" Rack Mountable) -H Standard Type (Main memory 16 Mbyte) 2 Dual-Redundant V net, Single ESB bus 4 Dual-Redundant V net, Dual-Redundant ESB bus V AC power supply (Conforms to Safety Standards CSA C22.2 No ) (*1) V AC power supply (with CE Mark and C-Tick Mark) (*2) LFS100 Basic software license for Control Function for Standard Field Control Station (for FIO, for CP45) (*) *1: AFS0S with this suffix code dose not have CE Mark or C-Tick Mark. *: This suffix code can be used in the software version of R.02 or later. T01E.EPS Duplexed Field Control Unit (19 Rack Mountable Type) Model AFS0D Duplexed Field Control Unit (for FIO, for 19" Rack Mountable) -H Standard Type (Main memory 16 Mbyte) 4 Dual-Redundant Vnet, Dual-Redundant ESB bus E Dual-Redundant Vnet, Dual-Redundant ESB bus with SOE interface (*4, *5) V AC Power Supply (Conforms to Safety Standards CSA C22.2 No ) (*1) V AC Power Supply (with CE Mark and C-Tick Mark) (*2) LFS100 Basic software license for Control Function for Standard Field Control Station (for FIO, for CP45) (*) *1: AFS0D with this suffix code dose not have CE Mark or C-Tick Mark. *: This suffix code can be used in the software version of R.02 or later. *4: Please order one terminator (Model YCB128) required on the IRIG-B branch unit at the FCS that comes at the end of the RS- 422 time synchronization link. *5: This suffix code can be used in the software version of R.04 or later. T02E.EPS Apr.01,

5 5 Field Control Unit (19" Rack Mountable Type) Model AFG0S Field Control Unit (for FIO, for 19" Rack Mountable) -H Standard Type (Main memory 2 Mbyte) 2 Dual-Redundant V net, Single ESB bus 4 Dual-Redundant V net, Dual-Redundant ESB bus V AC power supply (Conforms to Safety Standards CSA C22.2 No ) (*1) V AC power supply (with CE Mark and C-Tick Mark) (*2) LFS10 Basic software license for Control Function for Enhanced Field Control Station (for FIO, for CP45) (*) *1: AFG0S with this suffix code dose not have CE Mark or C-Tick Mark. *: R.02 or later version supports this hardware. T04E.EPS Duplexed Field Control Unit (19" Rack Mountable Type) Model AFG0D Duplexed Field Control Unit (for FIO, for 19" Rack Mountable) -H Standard Type (Main memory 2 Mbyte) 4 Dual-Redundant Vnet, Dual-Redundant ESB bus E Dual-Redundant Vnet, Dual-Redundant ESB bus with SOE interface (*4, *5) V AC Power Supply (Conforms to Safety Standards CSA C22.2 No ) (*1) V AC Power Supply (with CE Mark and C-Tick Mark) (*2) LFS10 Basic software license for Control Function for Enhanced Field Control Station (for FIO, for CP45) (*) *1: AFG0D with this suffix code dose not have CE Mark or C-Tick Mark. *: R.02 or later version supports this hardware. *4: Please order one terminator (Model YCB128) required on the IRIG-B branch unit at the FCS that comes at the end of the RS- 422 time synchronization link. *5: This suffix code can be used in the software version of R.04 or later. T05E.EPS Apr.01,

6 6 SOFTWARE REQUIREMENT For AFS0S and AFS0D, LFS100 Control Function for Standard Field Control Station (for FIO) is required, and for AFG0S and AFG0D, LFS10 Control Function for Enhanced Field Control Station (for FIO) is required. Specify these control functions with suffix code. For the specifications of LFS100 and LFS10, refer to GS Q0K0-1E and GS Q0K1-1E, respectively. ACCESSORIES AND SPARE PARTS The spare parts listed below are provided with the FCU. Parts Names Parts Numbers Quantity Remarks Insulating bush S9049PM - 8 Accessory Fuse S9528VK 1.6 A 125 V Fast blow (F) 1 Spare Filter T9070CK - 1 Spare Clamp filter A119MN - 1 Accessory ORDERING INSTRUCTIONS Specify model and suffix code. TRADEMARK CENTUM is a registered trademark of Yokogawa Electric Corporation. T0E.EPS Subject to change without notice. Sep.25,