Pages Modified: REPORT RE-ISSUED Illustrations Replaced: Ills. Nos. 1, 2, 3, 4, 5, 6, 8, 9 and 10

Transcription

1 Siemens AG, A&D CD, Betrieb Amberg OFFICE Siemens AG A&D CD CC TS2 REPORT: Edition 1: January 7, 2003 Project Montreal Issued by M. Legault, Eng. Edition 2: June 06, 2003 Project , Siemens Job 03dr008 Issued by Klaus Drutschmann Reviewed by M. Legault, Eng. Pages Modified: REPORT RE-ISSUED Illustrations Replaced: Ills. Nos. 1, 2, 3, 4, 5, 6, 8, 9 and 10 Contents: Pages 1 up to 15 Test Sheets - T1 to T19 Illustrations - Ill. Nos. 1 to 10 Photograph Figures - Fig. Nos. 1 to 15

2 Page: 2 of 16 CSA PRODUCT CLASS CLASS INDUSTRIAL CONTROL EQUIPMENT - Motor Controllers - Miscellaneous SUBJECT Solid-State Motor Controllers, open type soft-starter, Type 3RW3, followed by 4 or 5, followed by 52, 54, 55, 56, 58, 65, 66, 67, 72, 83, 84 or 86, followed by ODC, followed by 2, 3 or 4, followed by 4 or 5. Notes 1 The type designations are completed with numbers and letters indicating electrical and mechanical details. 2 These devices may be used in series with a magnetic motor controller and an overload relay. 3 Certified as component for use only in Certified equipment where the acceptability of the combination is to be determined by CSA International. DECLARATION The product, as described in this report, complies with: CSA Standard C22.2 No. 0-M91 - General Requirements CSA Standard C22.2 No Industrial Control Equipment

3 Page: 3 of 16 MARKINGS Submittor s name or tradename and/or file number LR and/or CSA Master Contract , model designation, electrical ratings and CSA Mark appear on an accepted adhesive label on each unit or ink stamped. The following statement is also marked on the devices: USE 60/75 o C COPPER WIRE ONLY. The instruction sheets provided with the controls specify required line/load lug kits and torques. The following statements are also marked on 3RW3.52 and 3RW3.54 devices: PROTECTED BY RK5 CLASS FUSES. PROTECTED BY SIEMENS CED63B CIRCUIT BREAKER. THAN 65,000 RMS SYMMETRICAL AMPERES; 600 V MAXIMUM WHEN PROTECTED BY SIEMENS CED63A CIRCUIT BREAKER. PROTECTED BY SIEMENS CED63B CIRCUIT BREAKER. PROTECTED BY SIEMENS ED63B CIRCUIT BREAKER. PROTECTED BY SIEMENS ED63A CIRCUIT BREAKER. The following statements are also marked on 3RW3.55, 3RW3.56 and 3RW3.58 devices: PROTECTED BY RK5 CLASS FUSES.

4 Page: 4 of 16 PROTECTED BY SIEMENS CFE63B CIRCUIT BREAKER. THAN 65,000 RMS SYMMETRICAL AMPERES; 600 V MAXIMUM WHEN PROTECTED BY SIEMENS CED63A CIRCUIT BREAKER. PROTECTED BY SIEMENS CFD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS FD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS ED63A CIRCUIT BREAKER. The following statements are also marked on 3RW3.65 and 3RW3.66 devices: PROTECTED BY RK5 CLASS FUSES. THAN 65,000 RMS SYMMETRICAL AMPERES; 600 V MAXIMUM WHEN PROTECTED BY SIEMENS CJD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS JD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS FXD63A CIRCUIT BREAKER. The following statements are also marked on 3RW3.67 devices: PROTECTED BY RK5 CLASS FUSES.

5 Page: 5 of 16 PROTECTED BY SIEMENS JD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS JXD63H CIRCUIT BREAKER. The following statements are also marked on 3RW3.72 devices: PROTECTED BY RK5 CLASS FUSES. PROTECTED BY SIEMENS LD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS LXD63H CIRCUIT BREAKER. PROTECTED BY SIEMENS LD63B CIRCUIT BREAKER. PROTECTED BY SIEMENS LXD63H CIRCUIT BREAKER. The following statements are also marked on 3RW3.83 devices: PROTECTED BY L CLASS FUSES. PROTECTED BY SIEMENS LXD63H CIRCUIT BREAKER. THAN 50,000 RMS SYMMETRICAL AMPERES; 480 V MAXIMUM WHEN PROTECTED BY SIEMENS HND CIRCUIT BREAKER.

6 Page: 6 of 16 PROTECTED BY SIEMENS LXD63H CIRCUIT BREAKER. The following statements are also marked on 3RW3.84 devices: PROTECTED BY L CLASS FUSES. PROTECTED BY SIEMENS HND CIRCUIT BREAKER. PROTECTED BY SIEMENS HND CIRCUIT BREAKER. PROTECTED BY SIEMENS LXD63H CIRCUIT BREAKER. The following statements are also marked on 3RW3.86 devices: PROTECTED BY L CLASS FUSES. PROTECTED BY SIEMENS HDP CIRCUIT BREAKER. PROTECTED BY SIEMENS HDP CIRCUIT BREAKER. ALTERATIONS The markings are as per the above AMarkings@ section. FACTORY TESTS The equipment, at the conclusion of manufacture and before shipment, shall withstand for one minute, without breakdown, the application of twice rated voltage plus 1000V between live parts and metal parts, which may be grounded, on random basis of minimum 3% of the daily production of equipment intended to bear the CSA Monogram. The factory test may be made at existing room temperature. As an alternative, a potential 20 percent higher may be applied for one second.

7 Page: 7 of 16 As an alternative, method based on IEC 410 and in accordance with submittor s ISO 9001 Quality program. Warning: These tests may present a hazard of injury to personnel and/or property and should only be performed by persons knowledgeable of such hazards and under conditions designed to minimize the possibility of injury.

8 Page: 8 of 16 DESCRIPTION General: These devices are open type reduced voltage soft start motor controllers. They may be used in series with a magnetic motor controller and an overload relay. The "case sizes" referred to in this report are provided for ease of reference only, and are not part of the product nomenclature or marking. Nomenclature: Provided as follows: 3RW ODC 2 4 I II III IV V VI I - II - III - IV - V - VI - Basic Control 3RW3 - All devices Number of ramp circuits 4 - Single ramp 5 - Dual ramp Maximum motor rating (at 480V) and case size HP (30kW), case size A HP (55kW), case size A HP (75kW), case size B HP (90kW), case size B HP (132kW), case size B HP (160kW), case size C HP (200kW), case size C HP (250kW), case size C HP (355kW), case size D HP (500kW), case size E HP (710kW), case size E HP (100kW), case size F Product designation ODC - All devices Control Voltage 2-24V dc 3-120V ac 4-240V ac Line Voltage to 400V ac to 575V ac

9 Page: 9 of 16 Ratings: Provided as follows. Letter refers to second position of Nomenclature. Horsepower Size 200/230V 230/460V 460/575V 52 10/10 10/25 25/ /20 20/40 40/ /25 25/50 50/ /30 30/60 60/ /40 40/75 75/ /50 50/ / /75 75/ / / / / / / / / / / / / / / / /1000 Short-Circuit Ratings: Short-circuits ratings with fuse/breaker combinations are provided as follows: Suffix (III) Volts ka Protective device Max. Size (A) Mfg. Type 52, Fuse RK5 52, T.M. 100 Siemens CED63B100 52, T.M. 100 Siemens CED63B100 52, T.M. 100 Siemens ED63B100 52, I.T. 100 Siemens CED63A100 52, I.T. 100 Siemens ED63A100 55, 56, Fuse RK5 55, 56, T.M. 150 Siemens CFE63B150 55, 56, T.M. 150 Siemens CFD63B150 55, 56, T.M. 150 Siemens FD63B150 55, 56, I.T. 125 Siemens CED63A150 55, 56, I.T. 125 Siemens ED63A125 65, Fuse RK5 65, T.M. 300 Siemens CJD63B300 65, T.M. 400 Siemens JD63B400 65, I.T. 250 Siemens FXD63A Fuse RK T.M. 400 Siemens JD63B I.T. 400 Siemens JXD63H Fuse RK T.M. 600 Siemens LD63B T.M. 600 Siemens LD63B I.T. 600 Siemens LXD63H I.T. 600 Siemens LXD63H600

10 Page: 10 of 16 Suffix (III) Volts ka Protective device Max. Size (A) Mfg. Type Fuse L T.M. 800 Siemens HND I.T. 600 Siemens LXD63H I.T. 600 Siemens LXD63H Fuse L T.M Siemens HND T.M Siemens HND I.T. 600 Siemens LXD63H Fuse L T.M Siemens HDP T.M Siemens HDP1600 Mfg. - Manufacturer T.M. - Thermal magnetic breaker I.T. - Instantaneous trip breaker