TECHNICAL PROGRAMME SECTION B: STANDARDS APPROVED

Transcription

1 SANS 47 SABS Coal-tar type disinfectant liquids (black and white) SANS Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 2-1: Partially dedicated system, 16 A 250 V a.c SANS Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 2-2: Fully dedicated system, 16 A 250 V a.c SANS Labelling of small volume (50 ml or less) parenteral drug containers SANS 585 SABS The production of frozen fish, marine molluscs, and products derived therefrom SANS Polypropylene (PP) pipes and pipe fittings for soil, waste and vent applications for aboveground use SANS 791 SABS Unplasticized poly(vinyl chloride) (PVC-U) sewer and drain pipes and pipe fittings SANS 795 SABS Wheelbarrows SANS Photovoltaic systems for use in individual homes, schools and clinics Part 1: Standardized requirements applicable to off-grid individual homes, schools and clinics NRS 052-1: SANS SABS Components of pressure pipe systems Part 1: Unplasticized poly(vinyl chloride) (PVC-U) pressure pipe systems SANS 967 SABS Unplasticized poly(vinyl chloride) (PVC-U) soil, waste and vent pipes and pipe fittings SANS 1083 SABS Aggregates from natural sources - Aggregates for concrete SANS Disposable portable condensed aerosol fire extinguishers B- 1 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

2 SANS 1223 SABS Fibre-cement pressure pipes and couplings SANS 1284 SABS Bow-saw frames and blades SANS SABS Flexible polyurethane foam sleeping mats and mattresses Part 1: Mats and mattresses having unsupported polymeric covers SANS SABS Flexible polyurethane foam sleeping mats and mattresses Part 2: Foam mattresses for domestic and hotel use SANS 1307 SABS Domestic storage solar water heating systems SANS SABS Retro-reflective and fluorescent warning signs for road vehicles Part 5: Retro-reflective chevron decals SANS SABS Hose Part 2: Commercial and sports hose SANS Humane handling and facilities for the protection of livestock at shows, auction sales, vending sites and livestock pounds SANS Humane transportation of livestock by road SANS Electrical connectors in group I and group II hazardous areas Part 3: Bolted type plugs and sockets for group I hazardous areas SANS 1494 SABS Two-wheeled mobile refuse bins SANS SABS Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) Part 4: XLPE Distribution cables SANS Gas measuring equipment primarily for use in mines Part 2: Fixed, transportable, and vehiclemounted flammable gas measuring and warning sensor heads, devices and instruments B- 2 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

3 SANS SABS Electricity payment systems Part 1: Payment meters SANS 1533 SABS Padlocks SANS Safety rules for the construction and installation of lifts Part 6: Rack-and-pinion lifts SANS 1557 SABS Sunscreen products SANS 1578 SABS Durable organic powders for coating of external architectural aluminium SANS Non-automatic self-indicating, semi-selfindicating and non-self-indicating weighing instruments with denominated verification scale intervals SANS 1678 SABS Sterilized milk SANS Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components ISO 6016: SANS 1825 SABS Gas cylinder test stations - General requirements for periodic inspection and testing of transportable refillable gas pressure receptacles SANS South African geospatial data dictionary (SAGDaD) and its application SANS 3001-AS Civil engineering test methods Part AS22: Determination of the binder content of mixtures used in bituminous slurry seals SANS 3001-AS Civil engineering test methods Part AS23: Determination of moisture in asphalt SANS 3001-GR Civil engineering test methods Part GR57: Determination of the initial stabilizer consumption of soils and gravels SANS Statistics - Vocabulary and symbols Part 3: Design of experiments ISO : B- 3 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

4 SANS 5844 SABS SM Particle and relative densities of aggregates SANS Earth-moving machinery - Determination of ground speed ISO 6014: SANS 6122 SABS SM Structural timber - Characteristic values of strength-graded timber - Sampling, full-size testing and evaluation SANS 6172 SABS SM Fire extinguishers - Assessment of fire rating SANS SABS SM Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 1: Tests on XLPE insulation SANS Earth-moving machinery - Symbols for operator controls and other displays Part 2: Specific symbols for machines, equipment and accessories ISO :1993 +AM 1:1997 +AM 2: SANS Control charts Part 4: Cumulative sum charts ISO : SANS Quality management - Customer satisfaction - Guidelines for business-to-consumer electronic commerce transactions ISO 10008: SANS SABS The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines SANS SABS The installation, inspection and maintenance of equipment used in explosive atmospheres Part 3: Repair and overhaul of equipment SANS SABS The classification of hazardous locations and the selection of equipment for use in such locations SANS Rolling bearings - Sleeve type linear ball bearings - Boundary dimensions and tolerances ISO 10285: SANS Transport of dangerous goods - The reprocessing of previously certified packaging SATS Translation projects - General guidance ISO/TS 11669: B- 4 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

5 SANS Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t ISO :2008 +Cor 1: SANS Earth-moving machinery - Operator station and maintenance areas - Bluntness of edges ISO 12508: SANS Environmental management systems - Guidelines for incorporating ecodesign ISO 14006: SANS Environmental management - Ecoefficiency assessment of product systems - Principles, requirements and guidelines ISO 14045: SANS Environmental management - Material flow cost accounting - General framework ISO 14051: SANS Water quality - Determination of fresh water sediment toxicity to Heterocypris incongruens (Crustacea, Ostracoda) ISO 14371: SANS SABS ISO Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet ISO 14788: SANS Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two- dimensional symbols 15415:2011 SANS Information technology - Automatic identification and data capture techniques -EAN/UPC bar code symbology specification 15420:2009 SANS Information technology - Automatic identification and data capture techniques - Bar code master test specifications 15421:2010 SANS Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing 15423: SANS Information technology - Security techniques - Security assurance framework Part 1: Introduction and concepts TR :2012 B- 5 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

6 SANS Information technology - Security techniques - Security assurance framework Part 2: Analysis TR :2012 SANS Information technology - Radio frequency identification for item management - Unique identification for RF tags 15963:2009 SANS Earth-moving machinery - Machine-control systems (MCS) using electronic components - Performance criteria and tests for functional safety ISO 15998: SANS Mobile elevating work platforms - Design calculations, safety requirements and test methods ISO 16368: SANS Geography Information - Data Quality ISO 19157: SANS Information technology - Biometric data interchange formats Part 4: Finger image data :2011 +Cor 1:2012 +AM 1:2013 SANS Information technology - Biometric data interchange formats Part 6: Iris image data :2011 +Cor 1:2012 SANS Information technology - Service management Part 3: Guidance on scope definition and applicability of : SANS Information technology - Service management - Part 4: Process reference model : SANS Industrial trucks - Verification of stability Part 1: General ISO :2008 +Cor 1: SANS Industrial trucks - Verification of stability Part 2: Counterbalanced trucks with mast ISO : SANS Industrial trucks - Verification of stability Part 3: Reach and straddle trucks ISO : SANS Industrial trucks - Verification of stability Part 21: Order-picking trucks with operator position elevating above mm ISO : B- 6 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

7 SANS Information technology - Real-time locating systems (RTLS) Part 2: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol :2012 SANS Information technology - Security techniques - A framework for identity management - Part 1: Terminology and concepts :2011 SANS Information technology - Security techniques - Guidance on the integrated implementation of and : SANS Information technology - Security techniques - Guidelines for identification, collection, acquisition, and preservation of digital evidence 27037:2012 SANS Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) ISO 28801: SANS Information technology - Security techniques - Requirements for partially anonymous, partially unlinkable authentication 29191:2012 SANS Energy audits - Requirements with guidance for use ISO 50002: SANS SABS EN Sanitary appliances - Baths from crosslinked cast acrylic sheets - Requirements and test methods EN 198: SANS Masonry cement Part 1: Composition, specifications and conformity criteria EN 413-1: SANS Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities EN : SANS Test requirements for low voltage aerial bundled cable accessories - Part 2: Tension and suspension clamps for self supporting system EN : SANS Test requirements for low voltage aerial bundled cable accessories - Part 3: Tension and suspension clamps for neutral messenger system EN : B- 7 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

8 SANS Test requirements for low voltage aerial bundled cable accessories - Part 4: Connectors EN : SANS Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test EN : SANS SABS EN Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods EN 545: SANS Glass in building - Basic soda lime silicate glass products Part 6: Wired patterned glass EN 572-6: SANS Glass in building - Basic soda lime silicate glass products Part 7: Wired or unwired channel shaped glass EN 572-7: SANS Glass in building - Basic soda lime silicate glass products Part 8: Supplied and final cut sizes EN 572-8: SANS Glass in building - Basic soda lime silicate glass products Part 9: Evaluation of conformity/product standard EN 572-9: SANS SABS EN Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two EN 1423: SANS Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn EN : SANS Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification EN 13163: SANS Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification EN 13164: SANS Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification EN 13165: B- 8 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

9 SANS Self-supporting double-skin metal-faced insulating panels - Factory-made products - Specifications EN 14509: SANS SABS IEC Rotating electrical machines Part 8: Terminal markings and direction of rotation IEC :2007 +AM 1: SANS SABS IEC Explosive atmospheres Part 14: Electrical installations design, selection and erection IEC :2013 SANS SABS IEC Explosive atmospheres Part 17: Electrical installations inspection and maintenance IEC :2013 SANS Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" IEC :2013 SANS Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index IEC : SANS SABS IEC Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K IEC : SANS SABS IEC Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire IEC : SANS Specifications for particular types of winding wires Part 0-2: General requirements - Enamelled rectangular copper wire IEC : SANS Specifications for particular types of winding wires Part 27: Paper tape covered rectangular copper wire IEC : SANS Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 IEC : SANS SABS IEC Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers IEC : B- 9 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

10 SANS SABS IEC Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machines IEC :2012 +Cor 1:2012 +AM 1: SANS SABS IEC Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors IEC : SANS Switches for household and similar fixed electrical installations Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) IEC : SANS Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers IEC : SANS Hand-held motor-operated electric tools - Safety Part 2-23: Particular requirements for die grinders and small rotary tools IEC : SANS Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements IEC : SANS SABS IEC Arc welding equipment Part 11: Electrode holders IEC : SANS SABS IEC Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) Part 1: General rules IEC :2012 +IS 1:2012 +Cor 1: SANS Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC : SANS Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes IEC :2009 +IS 1: B- 10 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

11 SANS Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems IEC : SANS SABS IEC Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters) IEC :2006 +AM 1: SANS Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) IEC : SATS Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations IEC/TS : SANS Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding V IEC : SANS Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units IEC :2013 +AM 1: SANS Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets IEC 61770: SATR Instrument transformers Part 102: Ferroresonance oscillations in substations with inductive voltage transformers IEC/TR : SANS Application integration at electric utilities - System interfaces for distribution management Part 9: Interfaces for meter reading and control IEC : SANS Electricity metering data exchange - The DLMS/COSEM suite Part 5-3: DLMS/COSEM application layer IEC : B- 11 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

12 SANS Electricity metering data exchange - The DLMS/COSEM suite Part 6-2: COSEM interface classes IEC : SANS Electricity metering data exchange - The DLMS/COSEM suite Part 7-6: The 3-layer, connection-oriented HDLC based communication profile IEC : SANS Electricity metering data exchange - The DLMS/COSEM suite Part 8-3: Communication profile for PLC S-FSK neighbourhood networks IEC : SANS Electricity metering data exchange - The DLMS/COSEM suite Part 9-7: Communication profile for TCP-UDP/IP networks IEC : SANS Resistance welding equipment Part 2: Electromagnetic compatibility (EMC) requirements IEC : SANS High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation IEC : SANS Cable management systems - Cable ties for electrical installations IEC 62275: SANS Fuel cell technologies Part 2: Fuel cell modules IEC : SANS Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety IEC : SANS Fuel cell technologies Part 3-200: Stationary fuel cell power systems - Performance test methods IEC : SATS Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment IEC/TS 62441: B- 12 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

13 SANS Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switchdisconnectors outside the scope of IEC to provide isolation during repair and maintenance work IEC : SANS Medical electrical equipment Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment IEC : SANS Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment IEC : SANS Terminological entries in standards Part 1: General requirements and examples of presentation ISO : SANS Terminological entries in standards Part 2: Adoption of standardized terminological entries ISO : SANS Broadband Radio Access Networks (BRAN); HiperMAN; Physical (PHY) layer ETSI TS : SANS Broadband Radio Access Networks (BRAN); HiperMAN; Data Link Control (DLC) layer ETSI TS : SANS Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech Part 1: Technical characteristics and methods of measurement ETSI EN : SANS Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive ETSI EN : B- 13 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

14 SANS Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or nonconstant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive ETSI EN : SANS Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI) Part 1: Overview ETSI EN : SANS SABS ETSI EN Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 246 GHz ETSI EN : SANS Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT Third-Generation cellular networks Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive ETSI EN : SANS Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive ETSI EN : SANS Fixed Radio Systems; Multipoint Equipment and Antennas Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas ETSI EN : ARP Guidelines for the installation and maintenance of street lighting B- 14 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER

15 ARP Regulatory requirements for explosion-protected apparatus ARP Guidelines for sustainable harvesting of traditional medicinal plants NRS NRS Electricity distribution - Stays and associated components NRS NRS Outdoor distribution cut-outs Part 1: Drop-out fuse-link assemblies or solid-link assemblies - Pole-mounted types - For nominal a.c. voltages up to and including 33 kv NRS NRS Outdoor distribution cut-outs Part 2: Expulsion fuse-links - For nominal a.c. voltages up to and including 33 kv NRS NRS Service distribution boxes - Meter kiosks and distribution kiosks Part 3: Low-voltage steel meter kiosks for use in underground networks NRS NRS Grid interconnection of embedded generation Part 2: Small-scale embedded generation Section 3: Simplified utility connection criteria for LV connected generators NRS NRS Theft deterrent earthing materials B- 15 SABS STANDARDS TECHNICAL PROGRAMME OCTOBER