Universal Input Digital Panel Meter With Bargraph, NA3

Transcription

1 products Panel Panel Meters Digital Universal Input Digital Panel Meter With Bargraph, NA3 Universale input (programmable) Wide voltage, AC/DC control 4 digit, With or without 3/7 colour bargraph

2 Description Programmable meters with multicolour bargraph indicators NA3, NA5 and NA6 type are destined to measure and recording d.c. current or d.c. voltage, temperature, resistance and other non-electrical magnitudes like: level, flow, pressure, humidity, h Meters with bargraph are devices ensuring both a high measurement accuracy and very well visualization of the measuring process courses. Good visualisation of the process is possible using meters in 3 and 7 coloured bargraph built with diodes made in the gallium nitride technology. They can find application in various industrial fields, e.g.food industry, pumping stations and savage-treatment plants, chemical industry, weather stations, brewing industry and many other fields where they are destined for visualisation of the measured value and evaluation of the monitored manufacturing process change trend. They can also find application in automation systems where programmable controllers are applied. input: programmable voltage: mv, V, V current: ma, 0...2A thermocouple, resistance thermometers 0...4/10Ω output: programmable - analog, relay (up to 8 relays in meter NA6 type ), digital RS-485 with MODBUS protocol supply: V a.c./d.c., V a.c./d.c. Kinds of execution: NA3 type horizontal, 1-measuring channel in 3 options: with bargraph, with bargraph and display, only with display NA5 type vertical, 1-measuring channel, with bargraph and display NA6 type vertical, 2-measuring channels, with 2 bargraphs and 2 displays. Next to programmable measuring functions meters have many additional functions: measurement of the input quantity and displaying it on the LED display and on the bargraph evaluation of the input signal into the indication on the base of the individual linear characteristic arithmetical: raising to a power, extraction of roots(additionally in NA6 type, operations in channels: summation, subtraction, multiplication, division) programming of the bargraph colour and resolution signalling of the set alarm value exceeding recording of the measured signal in programmed time intervals memorisation of maximal and minimal values programming of the measurement averaging time programming of the indication resolution lockout of parameter introduction by means of a password servicing of the RS-485 interface in MODBUS protocol, both in ASCII and RTU mode galvanic isolation fixing in the panel External dimensions: 96 x 24 x 125mm (NA3 type)

3 Example of application Technical

4 Kind of input Measuring range Pt C Pt C Pt C J (Fe-CuNi) C K (NiCr-NiAl) C N (NiCrSi-NiSi) C E (NiCr-CuNi) C R (PtRh13-Pt) C S (PtRh10-Pt) C T (Cu-CuNi) C Resistance Ω, Ω mv, Rinp. > 9 MΩ V, Rinp. > 4 MΩ Voltage V, Rinp. > 4 MΩ V, Rinp. > 4 MΩ V, Rinp. > 4 MΩ ma, Rinp. = 4 Ω Current ma, Rinp. = 4 Ω A, Rinp. = 10 mω ± 10% A, Rinp. = 10 mω ± 10% Inputs Outputs Kind of output Features galvanic isolation with resolution 0.025% of range current programmable 0/4...20mA Analogue output load resistance 500Ω or voltage programmable V load resistance 500Ω output response time: 100ms 1 or 2 relays NOC voltageless contacts maximum load carrying capacity: Relay output - voltage: 250 V a.c. 150 V d.c. - current: 5A 30 V d.c., 250 V a.c. - resistance load: 1250 VA, 150 W voltageless of OC type with npn transistor Open collector maximum load: 25 ma (OC type) range of appended voltages: V d.c. interface type: RS-485 transmission protocol: MODBUS ASCII Digital (8N1, 7E1, 701), RTU (8N2, 8E1, 8O1, 8N1) baud rate: 2400, 4800, 9600 bit/s

5 Readout field External Features NA3-F 4 LED displays with 7 segments, digits of 7 mm high, indication range NA3-B multicoloured bargraph as above NA3-D 4 LED displays with 7 segments, digits of 14 mm high, 3 alarm diodes, indication range as above Weight < 0.3 kg Overall dimensions 96 x 24 x 125 mm panel cut-out: 92+0,5 x ,5 mm Protec! on grade (acc. to EN 60529) IP40 from frontal side IP20 from terminal side Rated Operating Conditions Supply voltage V a.c./d.c V a.c./d.c. Power consumption < 8 VA Temperature ambient: C Storage: C Relative humidity < 95% Condensa! on inadmissible Safety and Compatibility Requirements Electromagnetic compatibility Noise immunity acc. to EN Noise emissions acc. to EN Safety requirements acc. to EN Connection diagram

6 Input Bargraph Alarm 1 Alarm 2 Alarm 3 Output Programmable parameters of the NA3 meter Input type typ Mathematical functions Func Kind of compensation Con Measuring averaging time Cnt Displayed characteristic Indi Measured value I_H1 Displayed value d_y1 Measured value I_H2 Displayed value d_y2 Bargraph type typb Bargraph colour colr Lower bargraph threshold brl Upper bargraph threshold brh Lower alarm threshold PrL Upper alarm threshold PrH Alarm type typa Delay of alarm operation dly Support of alarm signalling HOLd Colour of the lower threshold alarm index CurL Colour of the upper threshold alarm index CurH Lower alarm threshold PrL Upper alarm threshold PrH Alarm type typa Delay of alarm operation dly Support of alarm signalling HOLd Colour of the lower threshold alarm index CurL Colour of the upper threshold alarm index CurH Lower alarm threshold PrL Upper alarm threshold PrH Alarm type typa Delay of alarm operation dly Support of alarm signalling HOLd Colour of the lower threshold alarm index CurL Colour of the upper threshold alarm index CurH Output characteristic IndO Displayed value d_h1 Value on the analog output O_Y1 Displayed value d_h2 Value on the analog output O_Y2 RS-485 baud rate baud Kind of RS-485 transmission tryb Device address Adr

7 Ordering code Example of Order: The code: NA3 - F T R U means: NA3 -digital meter with bargraph of NA3 type F -with a bargraph and digital display T -with a 3-colour display R -red display colour U -universal input 0 -lack of analogue output signal 1 -additional output: RS-485 digital output + 1 relay 1 -supply voltage: V.a.c./d.c 0 -socket screw plug 00 -standard version 8 -without extra quality requirements