Selfie. Curving flexibility. Smooth and quiet rollers. Exceptionally easy installation.

Transcription

1 Designed to enable easy bending into a curve. Ready to be bent into L-shaped, S-shaped, U-shaped and other shaped curves. Special bender enables bending by hand at the installation site.

2 Curving flexibility. Smooth and quiet rollers. l e Exceptionally easy installation. 2

3 An easy way to stylish window treatment using the New Valance. Corner Support Valance Double racket Hooks New Valance Velcro tape Use Intermediate Stop or Last-in Intermediate Stop for styled curtains. 3

4 asic Installation Curving ethod A ending point R55 R115 L (Total rail length) = (A + + ) (specified size) (ending point) = (specified size) racket End Cap ending point L 1. At the rail bending point, align the 0º point of the bender with the end of the clamp and secure. 2. Hold the bender and the rail and gradually bend the rail to the graduation mark of the desired angle. Connector ender ending point: 0º Window type Attachment type L (Total rail length) (ending point) 90º bay window A Single R115 use R55 use (A + + ) (A + + ) Double Exterior side (R115 use) Interior side (R55 use) (A + + ) (A + + ) 60º bay window A Single Double R115 use R55 use Exterior side (R115 use) Interior side (R55 use) (A + + ) (A + + ) (A + + ) (A + + ) 45º bay window A Single Double R115 use R55 use Exterior side (R115 use) Interior side (R55 use) (A + + ) (A + + ) (A + + ) (A + + ) 4

5 Using a Partial ender This is useful for making partial curves for curtain returns at both ends of a bay window curved rail to prevent light filtering into the room. Curtain return It can also be used as a curve bender (55R). 1. Insert the end of the rail into the bender. 2. Slowly bend the rail on your. Partial ender Note: Do not use this bender with rails other than those specified. aterials and Finishes Parts Plate Roller Wheel Oval ring aterial Aluminum alloy extrusion material Hard polyethylene Acetal resin Stainless steel Finish Alumite, Alumite umber, Alumite, Alumite warm End Cap racket Parts Plate Stop plate Oval ring ody Snap board aterial Hard polyethylene Steel Stainless steel Steel Steel Finish racket Installation Interval and Allowable Curtain Load Within 10 cm (3.9") Within 60 cm (24") Within 10 cm (3.9") For 1 Roller One-way Draw Up to 5 kg (11 lb) Two-way Draw Up to + 5 kg (11 lb) 1 kg (2.2 lb) 5

6 Installation Dimensions Ceiling Attachment Easy Snap Ceiling Single racket racket width = 18 mm (.71") 9 mm (.35") 40 mm (1.6") 13 mm (.51") Ceiling Single racket racket width = 14 mm (.55") 10 mm (.39") 30 mm (1.2") 34 mm (1.3") 40 mm (1.6") 24 mm (.94") 33 mm (1.3") 42 mm (1.7") 32 mm (1.3") Easy Snap Ceiling Double racket racket width = 19 mm (.75") 36 mm 72 mm (2.8") Ceiling Double racket racket width = 18 mm (.71") 72 mm (2.8") Last-in Intermediate Stop 40 mm (1.6") 13 mm (.51") 5 mm 60 mm (2.4") 60 mm (2.4") 76 mm (3.0") Wall Attachment Single racket racket width = 18 mm (.71") Double racket racket width = 18 mm (.71") 6 mm (.24") 43 mm (1.7") 7 mm (.28") 103 mm (4.1") 23 mm (.91") 24 mm (.94") 41 mm (1.6") 27 mm (1.1") 23 mm (.91") 43 mm (1.7") 60 mm (2.4") Extra Double racket racket width = 24 mm (.94") Valance Double racket racket width = 18 mm (.71") 7 mm (.28") 128 mm (5.0") 7 mm (.28") 157 mm (6.2") 34 mm (1.3") 28 mm (1.1") 24 mm (1.0") 45 mm (1.8") 27 mm (1.1") 23 mm (.91") 43 mm (1.7") 45 mm (1.8") 75 mm (3.0") 60 mm (2.4") 60 mm (2.4") 6

7 Dimension for Valance ex. Ceiling double curved R15 R55 or more or more or less or less Room Side 60 mm or more s Size 1.82 m (72") mm (.63") 2.00 m (79") m (107") mm (.35") 3.00 m (118") rail cross section 3.64 m (143") m (157") New Valance s 2.37 m (93") Size mm (.87") 13 mm (.51") 3.37 m (133") rails per box (not including separately manufactured rails) 6.8 mm (.27") New Valance rail cross section with a Velcro (hooks) 7

8 Parts Product Name Product Name Product Name Rollers rackets Roller (8 pieces per strip) G Carrier One-way G Carrier Noiseless Roller Noiseless G Carrier Noiseless One-Way G Carrier Single racket Double racket Extra Double racket rackets End Cap Easy Snap Ceiling Single racket Ceiling Single racket Easy Snap Ceiling Double racket Ceiling Double racket Wall racket Overhead Hanger Corner Support End Cap Last-in Intermediate Stop Other Parts Adjustable Hanger Rod Adjustable Hanger Rod A Curve ender 55R Curve ender 115R Partial ender 400 ( mm/ ") 700 ( mm/ 16 28") A170 ( mm/ ") A250 ( mm/ ") A400 ( mm/ ") A700 ( mm/ 16 28") A1100 (595 1,100 mm/ 23 43") A1600 (845 1,600 mm/ 33 63") Valance Double racket Other Parts Intermediate Stop Joint Pin E