A. Product Data: Manufacturer s product data sheets for all specified curtain track and curtains.
|
|
|
- Katrina Gibson
- 6 years ago
- Views:
Transcription
1 CS Cubicle Curtains SECTION CUBICLE TRACKS AND CURTAINS PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Ceiling mounted curtain track 2. Track accessories and attachments 3. Cubicle curtains 1.02 SUBMITTALS A. Product Data: Manufacturer s product data sheets for all specified curtain track and curtains. B. Detail Drawings: Mounting details with the appropriate fasteners for specified project substrates. C. Sample for Verification: Provide samples of the following: 1. Samples of cubicle track, 4" (102mm) in length. Complete with (1) carrier as specified and stop. 2. Curtain Fabric: 12-inch square swatch or larger sample as required to show complete pattern repeat, from dye lot used for the work, with specified treatments applied. 3. Mesh Top: Not less than 4 inches square, demonstrating manufacture s standard hemming around mesh perimeter with matching fabric B. Manufacturer s standard installation instructions 1.03 DELIVERY, STORAGE, AND HANDLING A. Deliver materials in unopened factory packaging. B. Inspect material on delivery to verify products are as specified WARRANTY A. Manufacturer s standard warranty against manufacturer defects.
2 PART 2 PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS A. Subject to compliance with the requirements listed, provide cubicle track and carriers from the following manufacturer: 1. CS Cubicle Curtains 3 Werner Way Lebanon, NJ (800) CCInfo@c-sgroup.com 2. Substitutions: Alternative manufacturers will not be accepted 2.02 CUBICLE TRACK SYSTEM A. Cubicle Tracks: CS Cubicle Curtains #6062 surface-mounted tracks of heavy extruded aluminum alloy 6063-T4, 1 3/8" x 3/4", slotted to receive roller carriers, complete with accessories and components required for complete and secure installations including splices, end caps and corner bends. B. Corner Bends: Corner bends up to 36 radius are to be fabricated in one continuous L shape. Radiuses above 36 to be continuous or spliced based on room condition. 1. Finish: <**Note to specifier please choose desired track finish (option 1 or 2) a. Clear anodized aluminum [OR] b. White powder coat finish C. Carriers: <**Note to Specifier** choose desired carrier for project 1, 2, 3, 4, or combination of> 1. CS Cubicle Curtains 1062N, virgin nylon axle with nylon wheels complete with nickelplated brass bead-chain and hook assembly. a. Provide one carrier for each 6" of cubicle curtain width. 2. CS Cubicle Curtains 975, all nylon carriers. Carrier to have virgin nylon hook, axle and nylon wheels. a. Provide one carrier for each 6" of cubicle curtain width. 3. CS Cubicle Curtains SP062, spool carrier with all nylon spool, nickel plated brass bead connector, and aluminum hook.
3 a. Provide one carrier for each 6 of cubicle curtain width. 4. Breakaway Carriers: CS Cubicle Curtains 975P, all nylon breakaway carriers. Carrier to have virgin nylon hook, axle and nylon wheels. Carrier hook is to be designed to break away from axle at 22 pounds of applied pressure. a. Provide one carrier for each 6" of cubicle curtain width 2.03 CUBICLE CURTAINS A. Cubicle Curtain Fabric: Provide 100% polyester curtains. Fabric is to be opaque, washable, flame retardant and closely woven. B. Pattern & Color: <**Note to specifier please insert A. desired fabric pattern and color OR select B. desired C/S standard pattern & color and delete others> 1. Cubicle Curtain Fabric: Designer fabric pattern and color to be the following: a. <insert designer fabric pattern & color> 2. Cubicle Curtain Fabric: Select solid or patterned fabric from manufacturer s standard selection as follows: a. Pattern: RX7004 / Color: <insert color> b. Pattern: Twig / Color: <insert color> c. Pattern: Sugar Lash / Color: <insert color> d. Pattern: Moderate / Color: <insert color> e. Pattern: Flourish / Color: <insert color> f. Pattern: Increment / Color: <insert color> g. Pattern: Wink / Color: <insert color> h. Pattern: Fluent / Color: <insert color> i. Pattern: Flora / Color: <insert color> j. Pattern: Kriya / Color: <insert color> k. Pattern: Sing / Color: <insert color> l. Pattern: River Birch / Color: <insert color> m. Pattern: Lynx / Color: <insert color> n. Pattern: Pickupstix / Color: <insert color> o. Pattern: New Shadow Cube / Color: <insert color> p. Pattern: Xanadu / Color: <insert color> q. Pattern: Windsor / Color: <insert color> r. Pattern: Allegro / Color: <insert color> s. Pattern: Oxford / Color: <insert color> C. Antimicrobial Treatment: <**Note to specifier please delete this section if antimicrobial and/or liquid resistant treatment is not required> 1. Standard antimicrobial treatment applied to the selected cubicle curtain fabric [OR] 2. Nanotex + BioAM spill & stain resistant treatment combined with an antimicrobial agent for protection of fabrics within healthcare settings FABRICATION
4 A. Cubicle Curtain 1. Type of CS Curtain: <**Note to specifier please select type of curtain to be used> a. CS Traditional Curtains b. CS Snap-Lock Curtains with plastic snaps across top of fabric panels 2. Width: Equal to track length from which curtain is hung plus 10 percent, but not less than 12" (300 mm). 3. Length: Equal to floor-to-ceiling height minus 2" from finished ceiling at top and 12 or 15 above finished floor <**Note to specifier please select either 12 or 15 > 4. Mesh Top: Manufacturer s standard ½ holed mesh top, framed around perimeter with matching fabric as specified. Mesh height to be 18, 21, 28, 30 or other <**Note to specifier please select mesh height > 5. Top Hem: Not less than 1" (26 mm) and not more than 1 ½" (40 mm) wide, triple thickness, reinforced with integral web and double stitched. a. Grommets: 2 piece, rolled-edge, rustproof, nickel-plated brass and spaced not more than 6" (150 mm) o.c. 6. Bottom and Side Hems: Not less than 1" (25 mm) wide, reinforced, triple thickness and single stitched. 7. Seams: Not less than ½" (13 mm) wide, double turned and double stitched. 8. Curtain Tieback: At each termination. PART 3 EXECUTION 3.01 EXAMINATION A. Examine areas and conditions in which the cubicle track system will be installed 1. Complete all finishing operations, including painting, before beginning installation of cubicle tracking system materials. 2. Verify that surfaces and above ceiling supports are ready to receive work INSTALLATION
5 A. General: Locate the cubicle track as indicated on the approved detail drawing for the appropriate substrate B. Installation of Cubicle Track System: 3.03 CLEANING 1. Install cubicle track, secure, rigid, and true to ceiling line. 2. Slide carriers onto the track. 3. Install end cap or stop device. 4. Secure or suspend track to ceiling system. Install with mechanical fasteners or T- Grid clips 5. Install curtains on carriers ensuring smooth operation. A. At completion of the installation, remove any debris and clean surfaces in accordance with CS cleaning and maintenance instructions. END OF SECTION
A. Curtains: Provide curtain fabrics with the following characteristics:
CS Cubicle Curtains SECTION 10 21 23 CUBICLE CURTAINS WITH SNAP LOCK SYSTEM PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
16028 September 23, 2016
SECTION 10 21 23 - CUBICLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
BuyLine /CON. csgeneralcubicle. Privacy curtain maintenance made easy.
10 21 23/CON BuyLine 0256 csgeneralcubicle Privacy curtain maintenance made easy. C/S General Cubicle Track and Curtain Systems designed to look and work flawless, every time. General Cubicle has been
Richmond Hill Primary Renovation SECTION STAGE CURTAINS
PART 1 - GENERAL 1.01 RELATED DOCUMENTS SECTION 11 0640 STAGE CURTAINS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections,
CUBICLE CURTAINS / PRIVACY
CUBICLE CURTAINS / PRIVACY Cubicle Curtains / Privacy Revised 06/20/14 Not your run of the mill or and an off the shelf solution. It s Cube Care. We are firm believers that curtains can transform a space.
***************************************************************************************************************
11062 THEATER CURTAINS AND TRACKS SPECIFIER: CSI MasterFormat 2004 number 11 61 43 PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 05500 - Metal Fabrications. 2. 06100 - Carpentry. 3. 11132 - Projection
ARCHITECT'S GUIDE ALL NOISE CONTROL WINDOW HARDWARE
ALL NOISE CONTROL ARCHITECT'S GUIDE WINDOW HARDWARE All Noise Control, the most widely specified window hardware brand, offers a complete selection of window hardware and drapery heading systems suitable
SECTION THEATER CURTAINS AND TRACKS. A. American Society for Testing and Materials (ASTM):
SECTION 11062 THEATER CURTAINS AND TRACKS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 05500 - Metal Fabrications. 2. 06100 - Carpentry. 3. 11132 - Projection Screens. 4. Division 16 - Light Pipes.
Create a private, restful interior with Classic Cubicle Curtains from MIP
Create a private, restful interior with Classic Cubicle Curtains from MIP Unique and stylish texture Wide colour selection Available with or without mesh heading, and with grommets or buttonholes Feel
DRAPERY STYLES ACCORDIAFOLD
DRAPERIES DRAPERY STYLES ACCORDIAFOLD Accordiafold is a trademark name for the accordion style pleating of drapery. Unlike Ripplefold, the spacing of the fabric is a result of its pleats which are sharp
Intro to CCF. Attention to Detail. Product Offerings. Cubicle Curtain Factory, Inc. The quality of our service sets a higher industry standard
Cubicle Curtain Factory Appendix Page 1: Cover Page 2: Intro to CCF Page 3-11: Cubicle Curtain Fabrics Page 12: Simply 66 Snap Curtains Page 13: Curtain Track & Hardware Page 14: Hospitality Design Page
Cubicle Curtain Factory
Appendix Cubicle Curtain Factory Page 1: Cover Page 2: Intro to CCF Page 3-11: 2017-2018 Page 12: Simply 66 Snap Curtains Page 13: Curtain Track & Hardware Page 14: Hospitality Design Page 15: Projects
BuyLine /CON. and Track Systems. General Cubicle and C/S a new era in curtain and track systems
10 21 23/CON BuyLine 0256 and Track Systems General Cubicle and C/S a new era in curtain and track systems C/S Cubicle Curtains Two ways C/S makes changing curtains fast and easy. Track and Curtain Systems
DIVISION FURNISHINGS. WINDOW TREATMENTS Page 63 of WINDOW TREATMENTS WINDOW BLINDS
DIVISION 12 00 00 12 20 00 WINDOW TREATMENTS Page 63 of 190 12 20 00 WINDOW TREATMENTS 12 21 00 WINDOW BLINDS Roller Blinds Design Considerations 1. Provide roller blinds as follows: i. Windows with high
and Track Systems
10 21 23 2016 and Track Systems C/S Cubicle Curtains * Hospital infections kill more Americans each year than AIDS, car accidents and breast cancer, well over 100,000. There is a solution: Changing the
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 12/12/2018
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 11/06/2017
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
CUSTOM DRAPERY + CUSTOM WINDOW HARDWARE PROGRAMS
CUSTOM DRAPERY + CUSTOM WINDOW HARDWARE PROGRAMS GETTING STARTED: From the fabric you select to the hardware you choose, window treatments are an opportunity to define a room s style. This guide outlines
Write Walls Dry Erase Specification Data (Section 09720)
Write Walls Dry Erase Specification Data (Section 09720) Section 1 Part 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry Erase Wallcovering 2. Accessories B. Related Sections / Items 1. Section 09250
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-12 21 00 (August 2017) --------------------------- Preparing Activity: USACE Superseding UFGS-12 21 00 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
SECTION RADIANT HEATING UNITS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Hydronic radiant panel heaters. B. Electric radiant ceiling panel heaters. C. Radiant heating hydronic piping. SECTION 23 8300 RADIANT HEATING UNITS D. Outdoor electric
Product Guide Specification
December 2012 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product
Selfie. Curving flexibility. Smooth and quiet rollers. Exceptionally easy installation.
Designed to enable easy bending into a curve. Ready to be bent into L-shaped, S-shaped, U-shaped and other shaped curves. Special bender enables bending by hand at the installation site. Curving flexibility.
and Track Systems There s a better way to reduce the spread of healthcare associated infections.
10 21 23 and Track Systems 2013 There s a better way to reduce the spread of healthcare associated infections. C/S Cubicle Curtains Hospital infections kill more Americans each year than AIDS, car accidents
SECTION AIR OUTLETS AND INLETS
SECTION 23 37 00 AIR OUTLETS AND INLETS PART 1 - GENERAL 1.1 SUMMARY A. Section includes diffusers, light troffer diffusers, registers/grilles, door grilles, louvers, louvered penthouses, roof hoods, goosenecks.
SECTION FIRE EXTINGUISHER CABINETS
SECTION 104413 FIRE EXTINGUISHER CABINETS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
DIVISION 10 SPECIALTIES
DIVISION 10 SPECIALTIES 11/11 SECTION 10 21 13.16 PLASTIC LAMINATE TOILET COMPARTMENTS PART 1 - GENERAL 1.01 SECTION INCLUDES Plastic laminate toilet compartments, urinal screens, head rail braced. 1.02
Product Guide Specification
Simonton Windows December 2012 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes:
SECTION PRESENTATION DRY ERASE WALLCOVERING
SECTION 09720 PRESENTATION DRY ERASE WALLCOVERING PART 1 - GENERAL 1.1 SUMMARY EDIT ITEMS NOT INCLUDED IN THE PROJECT A. Section Includes: 1. Dry erase wallcovering. 2. Magnetic receptive dry erase wallcovering.
Cl/SfB (76.7) Curtains BRO H 02/12
Cl/SfB (76.7) Curtains BRO H 02/12 Harrier cubicle and shower curtains The Harrier concept: ready made cubicle curtains and shower curtains from stock. A simple idea that removes at a stroke the biggest
Section Plaster Accessories
Section 09209 Plaster Accessories PART 1 - GENERAL 1.1 SUMMARY A. Related work specified elsewhere includes: 1. Rough carpentry. 2. Finish carpentry and millwork. 3. Metal support systems. 4. Furring and
C1/SfB (76.7) CURTAINS BRO 12A
C1/SfB (76.7) CURTAINS BRO 12A Harrier cubicle and shower curtains The Harrier concept: ready made cubicle curtains and shower curtains from stock. A simple idea that removes at a stroke the biggest problem
SecuringHospitals.com presents... SUICIDE RESISTANT PRODUCTS. ...helping you keep your patients and facility safe. SecuringHospitals.
presents... SUICIDE RESISTANT PRODUCTS...helping you keep your patients and facility safe SafeSupport Grab Bar Standard grab bars create a potential threat to patient safety. Many facilities are facing
SECTION AIR DUCT ACCESSORIES
SECTION 23 33 00 AIR DUCT ACCESSORIES PART 1 - GENERAL 1.1 SUMMARY A. Section includes back-draft dampers, combination fire-and-smoke dampers, duct access doors, fire dampers, smoke dampers, volume control
A. Section Common Motor Requirements for HVAC Equipment: Fan motors.
SECTION 233516 - ENGINE EXHAUST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Exhaust fans. B. Ductwork and duct fittings. C. Inlet fittings. D. Accessories. E. Carbon monoxide detectors. 1.2 RELATED
WALLCOVERINGS WALLCOVERINGS
09950 - WALLCOVERINGS 09950-1 PART ONE: GENERAL 1.1 Description WALLCOVERINGS 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance
WWW.ONTHERIGHTTRACK.COM 100% RECYCLABLE DISPOSABLE CUBICLE CURTAINS THE BEST SOLUTION FOR HIGH INFECTION AREAS, AND THE ENVIRONMENT. Because laundering simply isn t practical in high infection areas (such
Perimeos. Ceiling Recess. decor. systems
Ceiling Recess decor systems Ceiling Recess Perimeos is a revolutionary ceiling perimeter solution, for concealing blinds and curtain tracks. A key feature is the SpeedClip mounting channel. This allows
SECTION GAS-FIRED RADIANT HEATERS
SECTION 23 55 23 PART 1 - GENERAL 1.1 DESCRIPTION SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph
1. Vinyl wall covering. 2. Woven glass-fiber wall covering. 3. Textile wall covering. 4. Wallpaper. 5. Heavy-duty, synthetic, textile wall covering.
SECTION 09950 - WALL COVERINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
SECTION PRESENTATION DRY ERASE WALLCOVERING
SECTION 09 72 00 PRESENTATION DRY ERASE WALLCOVERING PART 1 GENERAL 1.1 SUMMARY EDIT ITEMS NOT INCLUDED IN THE PROJECT A. Division Includes: 1. Dry Erase Wallcovering. 2. Magnetic Receptive Dry Erase Wallcovering.
# OF GROOVES PER FOOT OF PANEL AVAILABLE EDGE TREATMENTS T&G BANDED # OF GROOVES AVAILABLE EDGE TREATMENTS PER FOOT OF PANEL T&G BANDED
1' [304.80mm] OR 2' [609.60mm] 8' OR 10' LENGTHS AVAILABLE SKU # PANEL SIZE FACE WIDTH GT-3400S 1' X 8' GROOVE WIDTH 34mm 2mm 8 GT-3400S-CS CUSTOM 34mm 2mm 8 # OF GROOVES PER FOOT OF PANEL AVAILABLE EDGE
GENIE CLIP TYPE RST. Resilient Sound Isolation Clip INSTALLATION INSTRUCTIONS
GENIE CLIP TYPE RST Resilient Sound Isolation Clip INSTALLATION INSTRUCTIONS NOTE If at any time there is a question or concern as to the installation methods please contact Pliteq Inc or your local representative.
Coat Racks / Floor Racks / Hooks / Hangers Hook Panels / Concealed Wardrobes
Coat Racks / Floor Racks / Hooks / Hangers Hook s / Concealed Wardrobes Phone: 913-281-4555 Fax: 913-281-4554 Website: www.emcospi.com Aluminum & Hardwood Coat Racks Whenever large groups gather at convention
A. AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA) 101: Appendix Dissimilar Materials.
B B11.0 DIVISION 08 - OPENINGS SECTION 08 17 00 INTEGRATED DOOR OPENING ASSEMBLIES Specifier Note: Coordinate and edit articles and paragraphs below to suit project requirements. Add section numbers and
DIVISION 8 OPENINGS SECTION OVERHEAD COILING FIRE DOORS. A. Section Metal Fabrications: Support framing and framed opening.
DIVISION 8 OPENINGS SECTION 08 33 23 PART 1 GENERAL 1.1 SECTION INCLUDES A. Overhead coiling counter fire doors. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Support framing and framed opening.
Uniclass L4223 CI/SfB (76.7) Epic D22. Roller Blind System
Uniclass L4223 CI/SfB (76.7) X Epic D22 Roller Blind System Roller Blind Systems KEY BENEFITS ultra smooth operation 4 tube diameter suited to blind size patented end cap locking system 4 ensures blind
SECTION (15820) - AIR DUCT ACCESSORIES
PART 1 GENERAL 1.01 SUMMARY A. Section includes: SECTION 23 33 00 (15820) - AIR DUCT ACCESSORIES 1. Manual-Volume Dampers 2. Fire Dampers 3. Turning Vanes 4. Duct-Mounted Access Doors 5. Flexible Connectors
B L I N D S 2 ALUMINUM HORIZONTALS. Motorization - Cut Sheets - Specifications
B L I N D S 2 ALUMINUM HORIZONTALS Motorization - Cut Sheets - Specifications ALUMINUM HORIZONTAL BLINDS INTRODUCTION Possibly the original Horizontal Blind, Aluminum Blinds have been around for decades.
DETEX ARCHITECTURAL SPECIFICATIONS, June 2012 AO19 SERIES HEAVY DUTY LOW-ENERGY ELECTRIC SWING DOOR OPERATOR
DETEX ARCHITECTURAL SPECIFICATIONS, June 2012 AO19 SERIES HEAVY DUTY LOW-ENERGY ELECTRIC SWING DOOR OPERATOR SECTION 08 71 13 LOW ENERGY AUTOMATIC OPERATORS Specifier Note: Coordinate and edit articles
GUIDE SPECIFICATION ADVANCED RADIANT SYSTEMS DU/DUH DUAL OUTPUT RANGE INFRARED TUBE HEATERS
GUIDE SPECIFICATION ADVANCED RADIANT SYSTEMS DU/DUH DUAL OUTPUT RANGE INFRARED TUBE HEATERS SECTION 15540 FUEL- FIRED HEATERS (Alternate - SECTION 235523 - GAS-FIRED RADIANT HEATERS) This section is based
A. Product Data: Include rated capacities, furnished specialties and accessories.
BASE BID: SECTION 15542 FUEL-FIRED RADIANT HEATERS PART 1 - GENERAL 1.1 SUMMARY A. Furnish and install a Co-Ray-Vac Low Intensity Vented Infrared Radiant Vacuum Gas Heating System. System must be certified
1. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes for detention furniture.
SECTION 125500-WALL BED SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
c. Oko-Tex (European environmental health standard)
SECTION 09720 Wall Covering Texturglas WALL FINISH SYSTEM GENERAL 1.1 SUMMARY A. Section Includes: Texturglas Wall Finish System. B. Related Sections: Section(s) related to this section include: 1. Gypsum
Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 22 63 13 GAS PIPING FOR LABORATORY AND HEALTHCARE FACILITIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
Before you begin the installation process, gather the following tools and keep them handy:
Vertical Blind Installation Instructions ucontact@udoblinds.com 1-855-205-8442 Congratulations on purchasing vertical blinds from Follow these instructions to properly install your blinds. Tools You Need
GUIDE SPECIFICATION ADVANCED RADIANT SYSTEMS KMI GoGas RANGE HIGH EFFICIENCY, HIGH INTENSITY INFRARED HEATERS
GUIDE SPECIFICATION ADVANCED RADIANT SYSTEMS KMI GoGas RANGE HIGH EFFICIENCY, HIGH INTENSITY INFRARED HEATERS SECTION 15540 - FUEL - FIRED HEATERS (Alternate - SECTION 235523 - GAS-FIRED RADIANT HEATERS)
oem OEM 1" Between the Glass Metal Blind Series P2100 Included:
OEM 1" Between the Glass Metal Blind Series P2100 Included: Specifications ^Overview Diagram oem S H D E S INC 700 First Avenue, Ford City, PA 16226 Phone. 724-763-3600 Fax: 724-763-3601 www.oemshades.com
DARTMOUTH COLLEGE DESIGN March 15, 2003 & CONSTRUCTION GUIDELINES
SECTION 15830 HEATING & COOLING TERMINAL UNITS PART 1 DESIGN DIRECTIVES 1.1 DESIGN CRITERIA A. All fan coil units shall be sized to meet design load while operating at medium speed. In extreme noise sensitive
CURTAINS Customer Address
CURTAINS Customer Address Tel Fax Mobile Email Page 1 of 8 Order Form and Product Guide Order Quote Project Name Project Location Date Window ID Window Location Width Drop Pair or Single Pair Single Left
SWFcontract COMMERCIAL WINDOW TREATMENTS CATALOG. Call or
SWFcontract COMMERCIAL WINDOW TREATMENTS CATALOG Call 800-327-9798 or email architectsolutions@ TABLE OF CONTENTS SWFcontract AND SPRINGS WINDOW FASHIONS Company Overview... 3 SOLAR SHADES SWFcontract
A. Product Data: Include rated capacities, operating characteristics, furnished specialties, and accessories.
Page 238219-1 SECTION 238219 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
A. This Section includes the following emergency plumbing fixtures:
Page 224500-1 SECTION 224500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SECTION C. Section Cable Trays for Electrical Systems: Additional identification requirements for cable tray systems.
SECTION 26 0553 PART 1 GENERAL 1.1 SECTION INCLUDES A. Electrical identification requirements. B. Identification nameplates and labels. C. Wire and cable markers. D. Voltage markers. E. Underground warning
SECTION INCLINE WHEELCHAIR LIFTS. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.
SECTION 14 42 13 INCLINE WHEELCHAIR LIFTS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Indoor inclined platform wheelchair lifts.
SECTION PRESENTATION DRY ERASE WALLCOVERING
SECTION 09 72 00 PRESENTATION DRY ERASE WALLCOVERING PART 1 - GENERAL 1.1 SUMMARY EDIT ITEMS NOT INCLUDED IN THE PROJECT A. Division Includes: 1. Dry erase wallcovering. 2. Magnetic receptive dry erase
SECTION Overhead Coiling Doors
SECTION 08 33 00 Overhead Coiling Doors To display hidden notes to specifier, select tools/ options/ view/ hidden text. GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,
1 P a g e w w w. s m o k e c o n t r o l. c o m. a u
PROPRIETARY ITEM: SMOKESHIELD S AUTOMATIC OVERHEAD PERIMETER TYPE FABRIC SMOKE CURTAIN PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Fire alarm or smoke detector-activated, overhead coiling fabric
SAC 100 Automatic Smoke Curtain System. - Specifier Information -
SAC 100 Automatic Smoke Curtain System - Specifier Information - CONTENTS 1. Introduction Page 3 2. Construction and Method of Operation Page 5 3. Performance 3.1. Resistance to Fire/Heat Page 6 3.2. Deflection
Metal Coil Drapery. Technical Data. The content includes: BOEGGER. Spectifications Optional color Typical application.
Metal Coil Drapery Technical Data Boegger Industrial Limited The content includes: Spectifications Optional color Typical application Typical material Attachment system Metal coil drapery - aesthetic appeal
A. General: Refer to paragraph entitled "SUBMITTAL" in Section Include the following data:
SECTION 15860 - FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
Tucked Roman Shade. Roman Shade $ Tucked Roman Shade Copyright of 7 Vol. 7 No. 8
Tucked Roman Shade Copyright 2009 1 of 7 Vol. 7 No. 8 Tucked Roman Shade U For an outside mount add 2" to window width. Fabricate as a flush mount when possible or mount shade to back of board & use valance;
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 28 ELEC. SAFETY & SECURITY SECTION CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY
SECTION 280513 - CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Coaxial cabling. 2. RS-232 cabling. 3. RS-485 cabling. 4. Low-voltage control
A. Section includes wet-pipe sprinkler system, system design, installation, and certification.
SECTION 21 13 13 WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes wet-pipe sprinkler system, system design, installation, and certification. 1.2 REFERENCES A. General: Comply
Signature Roller Shades
Signature Roller Shades Reference Guide Effective 8/1/2015 SignatureWindowCoverings.com Signature Roller Shade Warranty Signature Window Coverings LLC products sold to original purchaser, only for residential
Coat Racks / Floor Racks / Hooks / Hangers Hook Panels / Concealed Wardrobes Coat Racks Floor Racks Hooks Hangers Hook Panels Wardrobes
Coat Racks / Floor Racks / Hooks / Hangers Hook s / Concealed Wardrobes Coat Racks Floor Racks Hooks Hangers Hook s Wardrobes L2 Phone: 913-281-4555 Fax: 913-281-4554 Website: www.emcospi.com Phone: 913-281-4555
CUBICLE CURTAINS. The Textiles. The Disposable. OTRT Rings. Our Track. The Grabber. TWR & On The Right Track Cubicle Curtains
TWR Manufacturing Will Get You TWR & On The Right Track Cubicle Curtains Our Track Works seamlessly with our patented split ring technology and can be installed directly into any ceiling or can be retrofitted
CUSTOM-MADE-BLIND. ~ We Make You different ~ NO. 302 UNIT 1, BUILDINGS 24 NIN, YIWU CITY, ZHEJIANG, CHINA
NO. 302 UNIT 1, BUILDINGS 24 NIN, YIWU CITY, ZHEJIANG, CHINA 322000 TEL: CUSTOM-MADE-BLIND 0579-85178289 FAX: 0579-85978289 www.coloradowin.com ~ We Make You different ~ 1 CUSTOM-MADE-BLIND We are major
SPECIAL SPECIFICATION 2242 LATH, STUCCO AND PLASTER
2004 Specifications CSJ: 0921-02-314 SPECIAL SPECIFICATION 2242 LATH, STUCCO AND PLASTER 1.1 DESCRIPTION A. Section Includes 1. This Item shall govern for the installation of lath, stucco and plaster particularly
1 P a g e w w w. s m o k e c o n t r o l. c o m. a u
PROPRIETARY ITEM: FIBERHSIELD S AUTOMATIC OVERHEAD PERIMETER TYPE FABRIC FIRE CURTAIN This master specification should be read in conjunction with How to specify fire curtains technical guide to be published
ClearSpan Fabric Room Divider Installation Guide
ClearSpan Fabric Room Divider Installation Guide Actual room divider may differ from the example shown above. 2009 ClearSpan All Rights Reserved. Reproduction is prohibited without permission. Revision
Marlux Fast-Fit Track Specification Sheet
Marlux Fast-Fit Track Fast-Fit Cubicle Track Cubicle Curtain Track General Manufacture Reference: Marlux Fast Fit Track System (Formerly Resistoid Cubicle Track) Track type: white powder coated, Fast Fit
LARGE FORMAT STORAGE. Limited Lifetime Warranty Limitation based on normal office usage and normal wear and tear.
22 LARGE FORMAT STORAGE MAYLINE C-Files Self-contained steel files have integrated caps and can be bolted together for stacking. Drawers have front metal plan depressor and rear hood to keep documents
SECTION XPRESS II INCLINED WHEELCHAIR PLATFORM LIFT. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.
SECTION 14 42 13 XPRESS II INCLINED WHEELCHAIR PLATFORM LIFT Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Indoor inclined platform
EXAMPLE SPECIFICATION ONLY
SECTION 097200 WALL COVERINGS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Prime Agreement, including General and Supplementary Conditions, when referenced by the Prime
SECTION BIOLOGICAL SAFETY CABINETS AND LAMINAR AIRFLOW WORK STATIONS
SECTION 11 53 53 BIOLOGICAL SAFETY CABINETS AND LAMINAR AIRFLOW WORK STATIONS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in the section
SPECIFICATIONS HYLYTR. with DOUBLE SLOT OPTICS
HYLYTR with DOUBLE SLOT OPTICS (HYWG) Recessed, Perimeter, Mud-In LED MULTI-GRAZER (HYMG) Surface LED SHOWCASER (HYSC) Recessed, Suspended LED HYWGR HYMG HYSCS HYMG HYWGRP Find additional images and information
SECTION AIR CURTAINS
Document No: LPV2/LPN2-CSI Date: 1014 SECTION 233433 AIR CURTAINS Important Note: This document contains hidden text appearing in purple. The final document should not display the hidden text. To remove
A. Product Data: Include rated capacities, operating characteristics, furnished specialties, and accessories for each type of product indicated.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes 1. Hydronic baseboard radiators. 2. Hydronic finned-tube radiators. 3. Hydronic convectors. 1.2 SUBMITTALS A. Product Data: Include rated capacities,
CEILING SYSTEMS. Between us, ideas become reality. Armstrong Blue Tongue Aluminium Grid and Perimeter/Pelmet Systems
CEILING SYSTEMS Between us, ideas become reality Armstrong Blue Tongue Aluminium Grid and Perimeter/Pelmet Systems Suspension Systems Content Modular Ceiling Systems Pages 4 5 One Way Ceiling Systems Pages
SPECIFICATION DELETED SECTION CENTRIFUGAL HVAC FANS
SECTION 23 34 16 CENTRIFUGAL HVAC FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Drawings and general provisions of the contract, including General and Special Conditions and Division 01 Specification
KINGS COUNTY JAIL EXPANSION PHASE III COUNTY OF KINGS SECTION
SECTION 237433, PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
SECTION AIR DOORS
SECTION 23 34 33 AIR DOORS Berner Series VSA air doors are designed for openings up to 12 ft for environmental separation and up to 10 ft for insect control. Berner Series VSB air doors are designed for
Construction Standards Page
Construction Standards Page 236313-1 SECTION 236313 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
STEP BY STEP INSTALLATION INSTRUCTIONS. Vertical Honeycomb Shades
STEP BY STEP INSTALLATION INSTRUCTIONS Vertical Honeycomb Shades Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience.
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 10 - SPECIALTIES
SECTION 105200 - FIRE-PROTECTION SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
CEILING SYSTEMS. Between us, ideas become reality. Armstrong Blue Tongue Aluminium Grid and Perimeter/Pelmet Systems
CEILING SYSTEMS Between us, ideas become reality Armstrong Blue Tongue Aluminium Grid and Perimeter/Pelmet Systems Suspension Systems Content Modular Ceiling Systems Pages 4 5 One Way Ceiling Systems Pages
ARCHITECTURAL SPECIFICATIONS
1 B9.1 In Ground Page 1 of 6, Aug 12 DIVISION 08 - OPENINGS SECTION 08 71 13 POWER DOOR OPERATORS Specifier Note: Coordinate and edit articles and paragraphs below to suit project requirements. Add section
Ballast Paver Design & Installation Guide
Ballast Paver Design & Installation Guide To Order: Contact Your Local Firestone Building Products Representative. PRODUCT DESCRIPTIONS Size: 1 1 2" x 11 3 4" x 1 1 2" Weight: 12 0.5 lbs./sq. ft. Compressive
SPECIFICATIONS: FIREGUARD CROSS CORRIDOR CC
SPECIFICATIONS: FIREGUARD CROSS CORRIDOR CC SECTION 08 35 13.23 ACCORDION FOLDING FIRE DOORS PART 1 GENERAL 1.01 SUMMARY OF WORK A. Division 0 and 1, as indexed, apply to this section. B. Furnish and install