CC150 General Production Hose Crimper
|
|
- Jody Patterson
- 5 years ago
- Views:
Transcription
1 CC0 General Production Hose Crimper The CC0 Series es hose crimper with the Micrometer Style Adjustment t and 0 tons of crimping force has the capability to crimp up to " industrial hose. UNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT Easy to use and read. Ideal for repetitive crimps. Fully adjustable micrometer for a precise crimp. Simple to calibrate and minimum maintenance. Micrometer style adjustment permits crimping a wide variety of hose and fi ttings..7" 0mm Max Head Opening W/O Dies Micrometer Style Adjustment: Provides speed, precision and repeatability. CC0 CRIMPER OPERATORS MANUAL WITH DIAL MICROMETER STYLE ADJUSTMENT Updated 08/07
2 CC0 General Production Hose Crimper SAFETY PRECAUTIONS! SAFETY PRECAUTIONS! READ INSTRUCTIONS AND IDENTIFY ALL COMPONENT PARTS BEFORE USING CRIMPER. CRIMPER CC0 CAN PRODUCE 0 TONS OF CRIMPING FORCE. KEEP BOTH HANDS AWAY FROM PINCH POINTS. CONSULT HOSE AND FITTING MANUFACTURER FOR CORRECT MACHINE SETTINGS AND CRIMP MEASUREMENTS. ALWAYS WEAR EYE PROTECTION.
3 CC0 General Production Hose Crimper TABLE OF CONTENT SAFETY PRECAUTIONS COMPONENT PARTS & TECHNICAL DATA INITIAL SET UP & MAINTENANCE HYDRAULIC DIE INSTALLATION AccuStop TM COUPLING STOP CRIMPING/CALIBRATION TROUBLESHOOTING CC0 CRIMPER REPLACEMENT ACCESSORIES COMPONENT PARTS BREAKDOWN CUSTOMCRIMP NO-NONSENSE WARRANTY STATEMENT CUSTOMCRIMP CONTACT INFORMATION
4 CC0 General Production Hose Crimper COMPONENT PARTS & TECHNICAL DATA Oil Filler Cap Reservoir 8" 0" Metric Micrometer Style Adjustment 9" The HP motor delivers the power needed to get the job done quickly Built-in die storage panel keeps frequently used die sets readily available Power Switch The Foot Switch permits dies to be jogged into position and keeps both hands free Small Footprint for minimum use of space Technical Data 0 Ton Max SP: ", SP: -½", 6SP: -¼" Max Industrial: " L: 0" x W: 9" x H: 8" Weight: 9 lbs Power: HP / 0V / Phase (Standard) HP / 0V / Phase (Optional) HP / 0V / Phase (Optional) HP / VDC (Optional) HP / VDC (Optional) Die series: 8S Adjustability: Metric Opening w/o dies: 0mm /.7" Master die inside diameter: 8mm /." Master die travel: 8mm /." Reservoir capacity: 8 US Gallons Oil type: ISO 6 Hydraulic Oil Adapter dies: N/A
5 CC0 General Production Hose Crimper INITIAL SET UP & MAINTENANCE Do not lift the machine by the crimper head. Lift with a fork lift under the tank. Mount the crimper on a sturdy surface. Check electrical circuit to be certain that it matches the crimper requirements shown on the tag attached to the crimper cord. Electrical Requirements: 0 Volt Phase Current (Standard) 0 Volt Phase Current (Optional) 0 Volt Single Phase (Optional) DO NOT RUN CRIMPER ON AN EXTENSION CORD. Check to be certain that the motor rotates in the direction of the arrow shown on the motor housing. If motor rotation is opposite of the direction of the arrow, reverse any two hot wires in the electrical plug. (NOTE: THIS IS APPLICABLE TO PHASE CIRCUITS ONLY). Damage to the pump can result if the motor does not rotate in the correct direction. Check the oil level in the sight glass on the rear of the crimper. 8 U.S, gallons of ISO 6 hydraulic oil are required to completely refi ll the tank. Oil can be drained from either of the two ports at the bottom of the tank. An additional oil cooler, while not normally required, can be plumbed into the two ports at the rear of the crimper. Front Flange Bolts: Periodically, every 6- months depending upon usage, the front flange bolt torque should be checked. The correct torque is 99NM (7 Ft-Lbs). Lubricate the crimping head after each 00 crimping cycles or at the start of each shift if the crimper is used in a production setting. Bring the master dies to the fully closed position and lubricate the die fi ngers through the 8 lubrication fi ttings in the front fl ange face. Bring the dies to the fully open position and lubricate all 8 fittings again. Use only a high quality moly-disulfi de grease. Failure to do so may result in damage to the wearing surfaces.
6 CC0 General Production Hose Crimper HYDRAULIC DIE INSTALLATION Bring the crimper head to fully opened position as shown in photo A. Install the Hydraulic Dies with the quick change tool as shown in photo B. A Note: The die size stamped on the face of the die should face toward the operator. Align the studs of the Hydraulic Dies with the holes in the Master Dies and SLOWLY close the crimper head on the die set as shown in photo B. B Bring the crimper head to a fully closed position as shown in photo C. Remove the quick change tool as shown in photo D. C Note: The dies may also be inserted manually with the crimper head in the fully open position. Proceed to the Crimping Instructions to set up the crimper for the hose and fi tting being crimped. D For Hydraulic Die removal, bring the crimper head to the fully closed position as shown in photo D. Insert the quick change tool and open the crimper head releasing the Hydraulic Dies form their spring retention holes as shown in photo E. E 6
7 CC0 General Production Hose Crimper AccuStop TM COUPLING STOP The AccuStop TM coupling stop eliminates guesswork allowing the operator to visually observe exactly where the crimp will be positioned on the fi tting without the need for trial and error and product scrap due to poor crimp positioning. With the Coupling Stop retracted, load the appropriate set of dies and set crimp diameters as required. Coupling Stop Coupling Stop Clamp Coupling Stop Guide With the crimper in the MANUAL mode, bring the dies to a fully closed position. Loosen the Coupling Stop Clamp and position the Coupling Stop against the back face of the dies. Slide the Coupling Stop Guide against the Coupling Stop Arm. Hold the fi tting against the Coupling Stop Arm withdraw the Coupling Stop Rod such that the Guide is aligned with the desired crimp position. Lock the Coupling Stop Clamp. Position the fi tting against the Coupling Stop and actuate the crimper in the normal manner. The dimension from the face of the fi tting to the crimp position will now be the dimension established in the previous step. 7
8 CRIMPING/CALIBRATION CC0 General Production Hose Crimper CRIMPING / CALIBRATION CRIMPING Select the correct die for the combination of hose and fi tting being crimped. Consult the hose and fi tting manufacturer s specifi cations for the correct die to use and the fi nal crimp diameter required. The fi nal crimp diameter will be the closed diameter stamped on the face of the die plus the number shown on the micrometer gage. See the micrometer setting example below: Micrometer Setting Example Each 00 on the micrometer dial represents mm above the closed diameter of the die set. For example, with a 7mm die set installed and the micrometer set at 0 as shown in the photo, the fi nal crimp diameter would be 9. mm ( 7mm +.mm) Insert the hose and fi tting in the crimper head to the correct depth and press and hold the foot switch until the crimper shuts off. If the AccuStop TM coupling stop is being used make settings according to instructions. Check the fi nished crimp diameter with calipers to be certain that it is within the hose manufacturer s specifi cations. CALIBRATION Due to physical variations in hose and fi tting combinations, it may be necessary to offset the crimper in either the plus or minus direction by a few mm to get the measured crimp diameter to match the micrometer setting. If the final crimp dimension is consistently off in either direction the micrometer dial can be adjusted to compensate. Make a crimp with the hose and fi tting combination most commonly used, and measure the fi nished crimp diameter. Set Screw (.00 hex wrench) If necessary, loosen the set screw on the adjustment knob with a.00 hex key wrench. Rotate the adjustment knob so that the number on the dial matches the actual diameter of the fi nished crimp. Tighten the set screw and make another crimp to confi rm that the crimper is set correctly. 8
9 CC0 General Production Hose Crimper TROUBLESHOOTING PROBLEM: CRIMPER RUNS BUT IS SLOW OR NON-FUNCTIONAL Check supply voltage to see that it matches the voltage specifi ed on the tag attached to the crimper. If the crimper is connected to a three phase circuit, check all three legs of the circuit to be certain that all legs are hot. Measure the voltage to the crimper when the crimper is under load. Voltage should be a minimum of 90% of line voltage when the crimper is under load. Many performance problems are the result of low voltage or inadequate electrical service. Check motor rotation and be certain that the motor rotates in the direction of the arrow on the motor housing. For three phase units rotation can be reversed by switching any two wires in the plug. The circuit in the crimper is protected by a thermal overload relay. If the relay trips after resetting it from the master power switch, call for technical service. PROBLEM: MOTOR RUNS BUT FOOT SWITCH WILL NOT OPERATE Power to the secondary circuit is supplied from a volt step down transformer. If the motor runs normally but the foot switch will not function check the amp slo blow fuse located in the control box as shown in the photo below. PROBLEM: CRIMPER WILL CLOSE ON FITTING BUT DOES NOT DEVELOP POWER TO COMPLETE THE CRIMP Fitting is to large for selected crimp die. Select a crimp die that is closer to fi nal crimp diameter. Machine has built-in safety bypass to protect internal components from damage due to incorrect die selection. Check oil level. Position dies to the fully open position and check oil sight gage in rear of machine. Be sure the oil level is in the middle of the sight glass. Use ISO or 6 weight hydraulic oil. If problem(s) persist contact Customer Service for additional troubleshooting assistance 9
10 CC0 General Production Hose Crimper CC0 REPLACEMENT ACCESSORIES Dial Micrometer Assembly P/N:09-8 Foot Pedal Assembly (Included) P/N:08 8mm Quick Change Tool P/N:07 Manual Back Stop P/N:MBS-60 Die Rack 9 Station Die Holders P/N:066-8mm Crimper Stand 6 Station Die Holders P/N:07-8 Mini Grease Gun w/ CRIMPX Die Lubricant oz mini grease tube P/N:0889 CRIMPX Die Lubricant oz mini grease tube P/N:0887 CRIMPX Die Lubricant oz large grease tube P/N:0888 Protective Master Die Foam Pad P/N:0 Die Lock Pin For 8S/99S Die Series P/N:08 CustomCrimp Notched Digital Caliper IN/MM P/N:CC-Caliper 0
11 CC0 General Production Hose Crimper COMPONENT PARTS BREAKDOWN 8 ITEM CC0/00/00 Assembly (00) PART NUMBER DESCRIPTION 068-WELD CC Crimper Reservoir 0800 CC-60 Head Assembly 0 CC-0 Head Assembly 09 CC-8 Head Assembly 096 Front Die Panel 0 99MM Die Holder 0 8MM Die Holder 9A /-0 x /8" SHCS 9A7 /-0 x / BHCS 00 Electrical Box Assembly 9A /-0 x / SHFCS 09 Dial Micrometer Assembly 006 Pin Plug/ Foot Cord 008 Foot Switch 00 Full Guard for Foot Switch HP/ Ph/8cc Motor and Pump HP/ Ph/8cc Motor and Pump QTY 0
12 CC0 General Production Hose Crimper COMPONENT PARTS BREAKDOWN 8 7 CC-0/00/00 Electrical Box (00) ITEM PART NUMBER DESCRIPTION STOCK NUMBER QTY 09 Electrical Box Metal Assembly K6 Cable Strain Relief 699K6 699K6 / NPT Cord Grip 699K6 7807K6 Multi-Wire Cord Grip 7807K6 699K /8 NPT Cord Grip 699K Pin Receptical R00A0A0 7 9A7 /-0 x / SHCS 9A7 8.LDIN. Length DIN Rail.LDIN A09 /-0 Nut with Tooth Washer 9067A Manual Starter with Overload - 0V Ph BMRHB Manual Starter with Overload - 0V Ph BMRHB CC-0/00/00 Electrical Box (00) ITEM PART NUMBER DESCRIPTION STOCK NUMBER QTY Manual Starter with Overload - 60V Ph BMRHB LINK.L Starter Switch Linkage BZ0VYRL 009 External Starter Handle and Linkage BZ0VYRL 907A97 #8- x / CS Screw 907A /60-VAC Transformer PT0QG A009 #8- Nut 9080A009 8 MEN Time-Delay Amp Fuse MEN Bridge Rectifier MP0 0 9A /-0 X 7/8" SHCS 9A 9A90 #8- x / BHCS 9A
13 CC0 General Production Hose Crimper COMPONENT PARTS BREAKDOWN ITEM CC Motor and Pump Assembly (07) PART NUMBER DESCRIPTION 0 HP 800 RPM Motor HP 800 RPM Motor HP 800 RPM Motor 09 Motor Mounting Flange 90A0 / Lock Washer 986A7 /- x /" Bolt 0-0 Motor Coupling 0-0 Coupling Spider Insert 07 8cc Gear Pump 0 cc Gear Pump 099 cc Gear Pump 980A /8 Washer 90A0 /8 Lock Washer 986A66 /8-6 x /" Bolt 0-0 /" Shaft Coupling 09-0 Flange Gasket JIC 7 M to SAE Adapter JIC 7 M to 0 SAE Adapter QTY FINAL ASSEMBLY PART NUMBER CREATION: 07-"MOTOR HP"-"PUMP SIZE"-"PHASE (IF REQ'D)" EX. 7. HP MOTOR WITH cc PUMP: EX. HP MOTOR WITH 8cc PUMP, SINGLE PHASE:
14 CC0 General Production Hose Crimper COMPONENT PARTS BREAKDOWN OPTIONAL Crimper Table Assembly (07) Item Part Number Description Qty 0 Die Panel 06 End Panel 9008A00 /6 Flat Washer 6 90A00 /6 Lock Washer 8 986A8 /6-8 X Hex Bolt A00 /6-8 Hex Nut Crimper Table Top MM Die Holder MM Die Holder 6 9 9A /-0 X /8 BHCS 6
15 CC0 General Production Hose Crimper CUSTOMCRIMP NO-NONSENSE WARRANTY STATEMENT CustomCrimp No-Nonsense Warranty Statement All CustomCrimp Products are warranted to be free of defects in workmanship and materials for one year from the date of installation. This warranty ends when the product becomes unusable for reasons other than defects in workmanship or material. Any CustomCrimp Product proven to be defective in workmanship or material will be repaired or replaced at no charge. To obtain benefi ts of this warranty, fi rst, contact Warranty Repair Department at Custom Machining Services at (9) 6-68 and then deliver via prepaid transportation the complete hydraulic product to: ATTN: WARRANTY REPAIR DEPT. Custom Machining Services, Inc. 8 North Co. Rd 00 East Valparaiso IN 68 If any product or part manufactured by CustomCrimp is found to be defective by CustomCrimp, at its option, CustomCrimp will either repair or replace the defective part or product and return via ground transportation, freight prepaid. CustomCrimp will not cover any incoming or outgoing freight charges for machines sold outside The United States. This warranty does not cover any product or part which is worn out, abused, altered, used for a purpose other than for which it was intended, or used in a manner which was inconsistent with any instructions regarding its use. Electric motors are separately warranted by their manufacturer under the conditions stated in their separate warranty.
16 CC0 General Production Hose Crimper CONTACT US CUSTOMCRIMP, YOUR SINGLE SOURCE FOR HOSE ASSEMBLY PRODUCTS. Products and services to support industry wide hose assembly needs. CustomCrimp Custom Machining Services, Inc. 6 N. County Rd. 00 East Valparaiso, IN 68 Ph: (9) 6-68 Fax: (9) CustomCrimp See the complete line of CustomCrimp Crimpers and Accessories at: (9)
CC38 General Production Hose Crimper
The CC38 Series hose crimper with the Patented t ed ACT Controller and 0 tons of crimping force has the capability to crimp up to " industrial hose. UNIQUE USER FRIENDLY PATENTED ACT TM CONTROLLER Fully
More informationCC1000 Production / Industrial Hose Crimper
The CC000 Series hose crimper with the Patented t ed ACT Controller and 485 tons of crimping force has the capability to crimp hoses from ¼" up to 0" in diameter. UNIQUE USER FRIENDLY PATENTED ACT TM CONTROLLER
More informationD165-D160 SERIES HYDRAULIC HOSE CRIMPER OPERATORS MANUAL
Page D65-D60 SERIES HYDRAULIC HOSE CRIMPER OPERATORS MANUAL SAFETY PRECAUTIONS Page MODELS COVERED This manual is applicable to different variations of the D60 Series and D65 Series Crimpers. A Standard,
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 80 ton cylinder has the capacity to crimp hoses up to 1-¼" 4 wire (with standard dies) and up to 1-¼" 6 wire and 2" 4 wire (with larger dies).
More informationD100S-T420 Portable Service Hose Crimpers
The D00S-T420 Portable series hose crimper paired with either a ValPower Hand Pump, Pneumatic Pump or Multi-Electric Pump make the perfect combination for portable crimping requirements. UNIQUE USER FRIENDLY
More informationD165 SERIES Service Hose Crimpers
D65 SERIES Service Hose Crimpers D65 Series hose crimpers with the Micrometer Style Adjustment t and 62 tons of crimping force has the capability to crimp hoses up to " 6SP*. UNIQUE USER FRIENDLY MICROMETER
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 62 tons of crimping force has the capability to crimp hoses up -¼" -2 wire, -¼" 4 wire, and " 6 wire. UNIQUE USER FRIENDLY MICROMETER STYLE
More informationCC650 Production / Industrial Hose Crimper
The CC650 Series es hose crimper with the Patented ted ACT Controller olle ler and 350 tons of crimping force has the capability to crimp hoses from ¼" up to 6" in diameter. UNIQUE USER FRIENDLY PATENTED
More informationKH-80 HYDRAULIC CRIMPER OPERATORS MANUAL
KH-80 HYDRAULIC CRIMPER OPERATORS MANUAL 1 SAFETY PRECAUTIONS READ AND IDENTIFY ALL COMPONENT PARTS BEFORE USING CRIMPER. CRIMPER CAN PRODUCE 80 TONS OF FORCE. KEEP BOTH HANDS AWAY FROM PINCH POINTS. CONSULT
More informationCC25 HYDRAULIC CRIMPER OPERATORS MANUAL
CC25 HYDRAULIC CRIMPER OPERATORS MANUAL Page 2 SAFETY PRECAUTIONS READ INSTRUCTIONS AND IDENTIFY ALL COMPONENT PARTS BEFORE USING CRIMPER CRIMPER CAN PRODUCE 137 TONS OF FORCE. KEEP BOTH HANDS AWAY FROM
More informationD105M COMPONENT IDENTIFICATION
D105M COMPONENT IDENTIFICATION 1 35 TON HYDRAULIC CYLINDER REMOVABLE PUSHER OIL FILL AND VENT PLUG PNEUMATIC START/STOP SWITCH 110 VOLT HYDRAULIC PUMP ADJUSTABLE RAM RETRACTION STOP MICRO-CRIMP ADJUSTER
More informationD100 SERIES HYDRAULIC HOSE CRIMPER OPERATORS MANUAL
D00 SERIES HYDRAULIC HOSE CRIMPER OPERATORS MANUAL Page 2 MODELS COVERED This manual is applicable to different versions of the D_00_ Series Crimpers. A Standard, Metric and DC micrometer is available
More informationSafety & Operating Manual
34012 (Ind.) 428-7291 (Auto.) 3/2005 GC32-XD Safety & Operating Manual The World s Most Trusted Name in Belts, Hose and Hydraulics. GC32-XD OPERATOR S MANUAL Part No.: 78828 Prod. No.: 7480-7001 Crimper
More informationMC2501 OPERATING AND CALIBRATION INSTRUCTIONS
MC2501 OPERATING AND CALIBRATION INSTRUCTIONS CONTENTS 1 - CERTIFICATE OF CONFORMITY... 3 2 DESCRIPTION.... 4 2. 1 - GENERAL... 4 2. 2 - CHARACTERISTICS... 4 2. 3 WORKING PRINCIPLE.... 5 2. 3. 1 Hydraulic
More informationOmniCrimp 21. Safety & Operating Manual
OmniCrimp 21 Safety & Operating Manual WARNING! An incorrect hose assembly can rupture or blow apart in use, resulting in serious injury, death, or property damage. REMEMBER: Others depend on you to make
More informationParts and Service Manual
Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX
More informationMC1000 / MC1001 MANUAL. Operating and Calibration Instructions
MC1000 / MC1001 MANUAL Operating and Calibration Instructions MC1000/MC1001 MANUAL Operating Instructions Contents Certificates.. 3 Circuit Diagram. 5 Gates MC1000/MC1001 Hose Crimping Machine. 6 Operating
More informationASTRO ENVELOPE FEEDER AMC FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-17 FOR HEIDELBERG PRINTMASTER INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and
More informationEasy Dose Chemical Injection and Dispensing System DEMA Engineering Company
Easy Dose Chemical Injection and Dispensing System DEMA Engineering Company Overview The DEMA Easy Dose is a simple and reliable chemical delivery system. Easy Dose features an electronic control system
More informationCROWN SERVICE MANUAL ELECTRIC COUNTERTOP STEAMERS MODELS: PX-3 PX-5
CROWN SERVICE MANUAL ELECTRIC COUNTERTOP STEAMERS MODELS: PX-3 PX-5 CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD, DOWNSVIEW, (TORONTO), ONTARIO, M3N 1V9 TELEPHONE: (416) 746-2358, FAX: (416) 746-8324
More informationENVIRO-PAK. Operation and Maintenance Manual. Manufacturer of
ENVIRO-PAK H Series Single Chamber Compactor Operation and Maintenance Manual Manufacturer of ENVIRO-PAK SAFESUB WINDCHILLER 800-737-5533 WWW.ENVIRO-PAK.NET SALES@ENVIRO-PAK.NET 4308 West Admiral Doyle
More informationMC2000 OPERATING AND CALIBRATION INSTRUCTIONS
MC2000 OPERATING AND CALIBRATION INSTRUCTIONS CONTENTS 1 - CERTIFICATE OF CONFORMITY... 3 2 - PRESENTATION... 4 2. 1 - GENERAL... 4 2. 2 - CHARACTERISTICS... 4 2. 3 - OPERATING PRINCIPLE... 5 2. 3. 1 -
More informationFlood Pumper Plus. Water Transfer Machine. Operator and Parts Manual. Model No.: Rev. 00 (11-99)
Flood Pumper Plus Water Transfer Machine Model No.: 607841 Operator and Parts Manual NOBLES 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE: 1-800-365-6625 FAX: 1 800 678 4240 608468 Rev.
More informationmodel NO. LSS GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
000 model NO. LSS- 00 GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Part number and descriptions can be obtained from the illustrated parts list section of this manual.
More informationPanel Fan Series Operators Manual (Galvanized and Polymer)
Panel Fan Series Operators Manual (Galvanized and Polymer) Galvanized Panel Fan with Three Wing Blade IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble,
More informationSHRIMP CUTTER AND DEVEINER
SHRIMP CUTTER AND DEVEINER 1 Prawnto Shrimp Machine of Texas Co., Inc. CONGRATULATIONS You have just purchased one of the most exciting and serviceable machines you have ever had in you operation. With
More informationB.I.C.A Built-In Coffee Appliance
B.I.C.A Built-In Coffee Appliance Automatic Coffee Brewer Parts & Service Models: 1033510, 1033510S & 1033511 3828 S. Main St. Los Angeles, CA 90037-1491 800-421-6860 310-787-5444 Fax 310-787-5412 e-mail:
More informationDyna-Star HP or HF Pump 35# Pail Kit and Follower Plate
Instructions Dyna-Star HP or HF Pump 35# Pail Kit and Follower Plate 332517B EN For adapting a 60# Dyna-Star Pump for use with a 35# bucket. For professional use only. Part No.: Important Safety Instructions
More informationTECHNICAL MANUAL TRAY DRYER
TECHNICAL MANUAL FOR TRAY DRYER MODEL TD321-3 TRAYDRYER MODEL: TD 321-3 Table of Contents Part 1 - Technical Information * Introduction * Catalogue Cut-sheet and Installation Drawing * Warranty Part 2
More informationWheelbarrow Mixer Operations Manual
Wheelbarrow Mixer Operations Manual Part# MIX3, MIX3-UK EDI# 27275, 27276 104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 Fax 800-477-6341 / 641-753-6341 www.marshalltown.com 1 of 20
More informationIMAGE V. Parts and Service Manual
IMAGE 0V Section II Parts and Service Manual (88B) CLARKE TECHNOLOGY Image Operator's Manual Page AUTHORIZED PERSONNEL MAINTENANCE To Access Pump Motor. Remove brush housing from machine. See "Brush Motor
More informationThe Danger signal indicates an immediately hazardous situation which, if not avoided, will result in death or serious injury.
The Danger signal indicates an immediately hazardous situation which, if not avoided, will result in death or serious injury. The Warning signal alerts you to potential hazards or unsafe practices which,
More informationAmerican Dish Service
American Dish Service INSTALLATION INSTRUCTIONS Model JDS12 (T) or (R) Muffler Booster (T) 12kW, 240v, 3-ph, (R) 12kW, 208v, 3-ph Manufactured by Hubbell Electric Heater Company for use on American Dish
More informationM5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual
M5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual Introduction..3 Safety Precautions 4 Installation Instructions 5 Electrical Connections..7 Operating Instructions..8 Maintenance Procedures...8 Parts
More informationInstallation, Operation and Maintenance Guide AP3900 Series Thermostatic Mixing Valves
Note: Please provide valve serial number (stamped on cover of valve) when ordering parts. Hot Water Tempered Water Outlet Cold Water Tempered Water Outlet Redundant Thermostatic Mixing Valve Hot Water
More informationSingle Phase Simplex SXL21=3, SXL24=3, SXH21=3, and SXH24=3
Single Phase Simplex SXL21=3, SXL24=3, SXH21=3, and SXH24=3 Manufactured by SJE-Rhombus Installation Instructions and Operation/Troubleshooting Manual 7000 Apple Tree Avenue Bergen, New York 14416 Phone:
More informationFM-17DS & FM-20DS FLOOR MACHINES
PARTS & OPERATING MANUAL FM-17DS & FM-20DS FLOOR MACHINES PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before
More informationTechnical Data. Name: ERIKA Automat fully automatic machine to divide and to round dough pieces of the same size
AUTOMAT MANUAL 1 Technical Data Name: ERIKA Automat fully automatic machine to divide and to round dough pieces of the same size Type Divisions Dough Portions (in ounces) Plate Nos. 3 30 1.0 3.5 #35 4/40A
More informationSection - A Vacuum Feed Attachment
Tray Box Former 1.0 Section - A Vacuum Feed Attachment A-1 Table of Contents SECTION NO. PAGE SECTION NO. PAGE A.0 INTRODUCTION PURPOSE... A-3 A.1 SET-UP AND ADJUSTMENTS FIGURE A-1 VACUUM FEED MOUNTING
More informationDISPOSER CONTROL CENTER
DISPOSER CONTROL CENTER Installation Manual Model CC-202D WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a hazardous situation
More informationREMOVE AND INSTALL AIR CLEANER ASSEMBLY
REMOVE AND INSTALL AIR CLEANER ASSEM 50 DISASSEM AND ASSEM- REMOVE AND INSTALL AIR CLEANER ASSEM Cover Connector Air cleaner assembly Place the machine on a level ground, lower the work equipment to the
More informationManual / Handbuch Spare parts list / Ersatzteilliste
Manual / Handbuch Spare parts list / Ersatzteilliste Equipment Imp.-Exp. GmbH Zitterpappelweg 9 D - 22391 Hamburg Tel.: + 49 40 60009468-0 Fax: + 49 40 536 75 01 E - M a i l : i n f o @ w e s c o - n a
More informationService Parts for models UF424 and UN324
Service Parts for models UF and UN This is the illustrated parts list for Scotsman ice maker models UF and UF. They were manufactured as either air or water cooled models, plus the air cooled models were
More information225FPCF Operator s Manual
Floor Polisher 225FPCF Operator s Manual FOR YOUR SAFETY DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Record This Important Information
More informationXPS-ProDry User s Guide Dryer Base
XPS-ProDry User s Guide XPS-ProDry User s Guide Dryer Base For Use with Inkjet Imaging Systems Manual Part#: M-3120 Revision: August 2005 XPS-ProDry User s Guide Written by Frank Mauri & John Brand Published
More informationMK-1605 Electric Concrete Saw EXPLODED VIEW & PARTS LIST
www.mkdiamond.com MK-0 Electric Concrete Saw EXPLODED VIEW & PARTS LIST MK-0B Premium Part# 8099 Revision 0 0.08 Manual Part# 79 Caution: Read all safety and operating instructions before using this equipment.
More information3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL
3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA
More informationBead Roller Operating, Servicing, and Safety Instruction Manual
Bead Roller Operating, Servicing, and Safety Instruction Manual CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. 1-800-67-26 10 Cooperative Way
More informationSwaging Machine Type H50-46ECO
ENDEAVOUR Int. Ltd. Tel +44 (0) 1225 446770 Fax +44 (0) 1225 446775 USER MANUAL Swaging Machine Type H50-46ECO Website: www.hydralok.net CONTENTS WARRANTY CONDITIONS... 3 EC DECLARATION OF CONFORMITY...
More informationModulAir Air Dryer with External Purge Tank - Changeover from Bendix AD-IS for Peterbilt Installation. Air Dryer Mounting Bracket (Item 1)
Instruction Guide L31259 11/10 ModulAir Air Dryer with External Purge Tank - Changeover from Bendix AD-IS for Peterbilt Installation Air Dryer Mounting Bracket (Item 1) Tank Mounting Bracket (Item 19)
More informationInstallation and Maintenance Manual Please retain this manual for future reference.
342 N. Co. Rd. 400 East Valparaiso, IN 46383 219-464-8818 Fax 219-462-7985 www.heatwagon.com Installation and Maintenance Manual Please retain this manual for future reference. Electric Construction Heaters
More informationService Manual. Ice Dispensing Bin Models DB-130H. hoshizakiamerica.com
Service Manual Ice Dispensing Bin Models DB-130H hoshizakiamerica.com Number: 73128 Issued: 5-6-2014 Revised: 2-19-2018 IMPORTANT Only qualified service technicians should attempt to service or maintain
More informationService Manual. Ice Dispensing Bin Models DB-200H. hoshizakiamerica.com
Service Manual Ice Dispensing Bin Models DB-200H hoshizakiamerica.com Number: 73136 Issued: 5-8-2006 Revised: 2-19-2018 IMPORTANT Only qualified service technicians should attempt to service or maintain
More informationSPECIFICATIONS FEATURES
FEATURES Excellent for collecting the large chips which will drop into the garbage can before reaching the impeller. The filter bag filters out the remaining sawdust down to 5 microns. With the cyclone
More informationSEARAY LOW MOISTURE POLISHER/SCRUBBER OPERATING & MAINTENANCE
SEARAY LOW MOISTURE POLISHER/SCRUBBER INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS This operator s book has important information for the use and safe operation of this machine. Read this book carefully
More informationVickers. Service Data. Piston Pumps. PVH57/63 Variable Displacement Piston Pump - 11 Design M-2206-S. Revised 11/01/97
Service Data Vickers Piston Pumps PVH57/63 Variable Displacement Piston Pump - 11 Design Revised 11/01/97 M-2206-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationASSEMBLY INSTRUCTIONS - NXS SERIES. INFRARED RADIANT TUBE HEATER Single and Two Stage Pull Through System (Negative Pressure)
ASSEMBLY INSTRUCTIONS - NXS SERIES OWNER / INSTALLER: For your safety this manual must be carefully and thoroughly read and understood before installing, operating or servicing this heater. INFRARED RADIANT
More informationOUTLET HOT INLET COLD INLET INSTALLATION
Bulletin G-29 December 2007 INSTALLATION ADJUSTMENT SERVICE TYPE TM-28 IMPORTANT! Provide valve serial number (stamped on cover of valve) when ordering parts!! Valve manufactured after July 2007 starting
More informationREPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 12-20(120VAC), PWS 12-20(240VAC), AED-1(120VAC), AED-1(240VAC), APK-1(120VAC) & APK-1(240VAC) PART # 510001 510003 500006 500015 500007 500016
More informationKC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY Unpack pump from carton and check for shipping damage. WARNING: Magnetic field hazard. This pump
More informationREF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3.
4.4 SUPPLY PUMPAK ASSEMBLY NOTE: This section applies only to systems, which include a supply pumpak. Only the H6, XA, and XC series systems contain a supply pumpak. If your system is a single zone, H6
More informationWCAD-Series Vended Washers Troubleshooting And Fault Codes
WCAD-Series Vended Washers Troubleshooting And Fault Codes Part # 8533-066-001 5/11 1 Common Troubleshooting Solutions Symptom Probable Cause Suggested Remedy 2 Machine does not start Machine will not
More information541D19 SERIES. Technical Manual. A Division of Aquion Partners L.P.
541D19 SERIES Technical Manual A Division of Aquion Partners L.P. Table of Contents Introduction... Page 1 Technical Specifications... Page 2 Flow Diagrams... Page 3 Injector & Flow Control Selection Injector...
More informationInstruction Manual. Super 88
Instruction Manual Super 88 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA Part No. 49555 SAFETY PRECAUTIONS DANGER Machine must be properly grounded to prevent electrical shock to personnel. Failure
More informationDRAINMAKER INSTALLATION INSTRUCTIONS PREINSTALLATION CHECKLIST
Manufacturers of... Quality Products since 1866 95 N. Oak St. Kendallville, IN 46755 1-800-345-9422 DRAINMAKER INSTALLATION INSTRUCTIONS PREINSTALLATION CHECKLIST FW0771 0116 Supersedes 0415 MODEL: DATE
More informationEAGLE 2000B EAGLE 2000BE EAGLE 2000EBT MUST READ MANUAL PRIOR TO INSTALLING MACHINE
EAGLE 2000B EAGLE 2000BE EAGLE 2000EBT MUST READ MANUAL PRIOR TO INSTALLING MACHINE Contents 1 Machine Safety Information 3 1.5 Safety Precautions Prior to Operating Machine 6 2 Machine Installation 7
More informationMODEL 625-DR & 625-S
Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 625-DR & 625-S DOUGH DIVIDER / ROUNDERS 0625S20000-CVR MODEL 625 DOUGH DIVIDER - ROUNDERS INDEX DEFINITIONS.. GEN93118
More informationSECAP Conveyor TC72 / Dryer TD72
SECAP Conveyor TC72 / Dryer TD72 4/08 Assembly, Operation & Parts Manual Second Edition TABLE OF CONTENTS SPECIFICATIONS UNPACKING ASSEMBLY 2 SETUP & OPERATION ELECTRICAL SCHEMATIC 8 CONVEYOR PARTS 9 OPTIONAL
More informationInstallation Instructions Part No , Part No Part No
Torsion-Flex Motor mount for PSC motors and Rigid-Mount for ECM motors Replacement Kit Cancels: New Installation Instructions Part No. 327752-401, Part No. 327753-401 Part No. 327754-401 IIK-310A-45-11
More informationFM-17HD & FM-20HD FLOOR MACHINES
PARTS & OPERATING MANUAL FM-17HD & FM-20HD FLOOR MACHINES PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before
More informationBurn Easy Installation Instructions LP or Natural Gas Fired Units. Cremator Setup:
Burn Easy Installation Instructions LP or Natural Gas Fired Units Cremator Setup: 1. Place cremator, outdoor on a solid base consisting of concrete or gravel. Keep this site free of all vegetation. Combustibles
More informationOperator s Manual MODEL 400A Hydra-Lift, 60, Air Power Lift & Manual Tilt. for Morse Hydra-Lift Drum Karrier Model 400A
Contents Page Receiving Procedures................. 1 Warranty............................... 1 Safety Information..................... 1-2 Machine Description................... 3-4 Operating Instructions...................
More informationWARNING USER S MANUAL. Model iq 2000 Series Dust Collector with manual shaker
USER S MANUAL Model iq 2000 Series Dust Collector with manual shaker WARNING Read all the following safety and operating instructions prior to using this unit. Not observing this information can result
More informationTC-720 RECYCLING BALER
OPERATING AND MAINTENANCE INSTRUCTIONS TC-720 RECYCLING BALER READ INSTRUCTIONS THOROUGHLY BEFORE OPERATING Sept. 06, 2013 3451 S. 40th Street Phoenix, AZ 85040 602.437.5020 800.223.4540 www.tsissg.com
More informationDisposal Unit (BKSDU) Burger King Shortening. Operation, Service & Parts Manual BURGER KING BKSDU
BURGER KING BKSDU Burger King Shortening Disposal Unit (BKSDU) Operation, Service & Parts Manual Frymaster, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified
More informationREPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-8(120VAC), PWS 8-8(240VAC), AED-1(120VAC), AED-1(240VAC), APK-1(120VAC) & APK-1(240VAC) PART # 500003 500014 500006 500015 500007 500016
More informationPanel Fan Series Operators Manual (Galvanized and Polymer)
Panel Fan Series Operators Manual (Galvanized and Polymer) 52" Belt Drive, Galvanized Panel Fan with Three Wing Blade IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before
More informationOperator s Manual S-333. Automated Soil Compactor. Version 3.3. Durham Geo Slope Indicator 2175 West Park Court Stone Mountain, GA USA
Automated Soil Compactor S-333 Operator s Manual Version 3.3 Durham Geo Slope Indicator 2175 West Park Court Stone Mountain, GA 30087 USA Phone: 800-837-0864 or +1.770.465.7557 Fax: 770.465.7447 e-mail:
More informationPOLISHERS. MODELS SeaRay 133 OPERATING & MAINTENANCE
POLISHERS MODELS SeaRay 133 INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS This operator s book has important information for the use and safe operation of this machine. Read this book carefully before
More informationINSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 2
INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 2 (PNEUMATIC CONTROL AND HYDRAULIC CONTROL) PUBLICATION No. 01900 Revision 2 Printed in Canada 1.1 INTRODUCTION Thank you
More informationBARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! CUDA26 MODEL# SERIAL#
www.usviper.com BARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# SERIAL# CUDA26 VIPER NORTH AMERICA P.O. BOX 104 HAMILTON,
More informationCAR-MON DUST COLLECTORS SERIES 207, 2410, 3015
INSTALLATION-OPERATION-MAINTENANCE CAR-MON DUST COLLECTORS SERIES 207, 2410, 3015 TEFC 3 phase motor Outlet duct Fan wheel housing Inlet duct connection After filter transition Optional after filter unit
More informationGen II Entree Bath. Maintenance Manual. All Models. Important Safety Instructions Read & Follow All Instructions Thoroughly
Gen II Entree Bath All Models Maintenance Manual Important Safety Instructions Read & Follow All Instructions Thoroughly Note: The serial tag is at the first page of this manual package. The Standards
More informationKC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY Unpack pump from carton and check for shipping damage. WARNING: Magnetic field hazard. This pump
More informationSpeedClave Steam Sterilizers
SpeedClave Steam Sterilizers Model Numbers: M7-020 thru -022 Serial Number Prefixes: V Service and Parts Manual "NO LONGER IN PRODUCTION" Some service parts may not be available for this product. FOR USE
More information7165 Dust Collector Owner s Manual
7165 Dust Collector Owner s Manual Oliver Machinery M-7165 12/2016 Seattle, WA Copyright 2003-2017 info@olivermachinery.net www.olivermachinery.net CONTENTS IMPORTANT SAFETY RULES----------------------------------------------------------------
More informationFloss Machines Instruction Manual Models #3017, #3017SS, 3024, and #3077 For Machines Manufactured after July 2007
Part No. 42131 Floss Machines Instruction Manual For Machines Manufactured after July 2007 Cincinnati, OH 45241-4807 USA Installation Instructions Inspection of Shipment: Unpack all cartons and check
More informationOwners Manual. Model MINI-CLASSIC CT. Pure Water. Water Distiller
FOR THE RECORD The model and serial number are found on the back panel. You should record both the model and serial number from the back of the machine for future reference. Model MINI-CLASSIC CT Date
More informationINSTALLATION SETUP AND OPERATING INSTRUCTIONS THERMOSTATIC WATER MIXING VALVE SYSTEM * TM-500A, TM-550A
C ASSE 1017 BULLETIN G-6B March 2009 INSTALLATION SETUP AND OPERATING INSTRUCTIONS WATER SYSTEM * TM-500A, TM-550A IMPORTANT! Provide valve serial number (located on valve body) when ordering parts!! *ASSE
More informationINSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 1
INSTALLATION AND SERVICE MANUAL FOR THE SERIES 2000 & SERIES 3000 FAN SERIES GEN 1 (PNEUMATIC CONTROL AND HYDRAULIC CONTROL) PUBLICATION No. 01524 Revision 15 Printed in Canada 1.1 INTRODUCTION Thank
More informationDirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE
Dirt Dragon WOOD FLOOR CLEANING MACHINE Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 800-441-1934 Fax: 800-942-2007 Technical Service: 877-856-5954 www.basicoatings.com
More informationWCVD-Series OPL Washers Troubleshooting And Fault Codes. Starting serial number ****** (09/13)
WCVD-Series OPL Washers Troubleshooting And Fault Codes Starting serial number ****** 8533-074-001 (09/13) Common Troubleshooting Solutions Symptom Probable Cause Suggested Remedy Machine does not start
More informationINSTRUCTION AND REPAIR MANUAL
SECTION 6 ITEM 390 DATED JANUARY 2003 SUPERSEDES SECTION 6 ITEM 390 DATED OCTOBER 2000 INSTRUCTION AND REPAIR MANUAL SERIES 390 6 The 390 Series is a superior commercial Multi-Stage Vertical In-Line Centrifugal
More informationNote: Please provide valve serial number (stamped on cover of valve) when ordering parts. Tempered Water Outlet. Hot Water Inlet.
Note: Please provide valve serial number (stamped on cover of valve) when ordering parts. Tempered Water Outlet Angle Checkstop Angle Checkstop Hot Water Inlet G3700LF Cold Water Inlet Installation 1.
More informationAFE400 SERVICE PARTS
This is the parts list for the AFE00. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL TUBE AXIAL FANS BTA, WTA, HTA, DDA The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended
More informationASSEMBLY and INSTALLATION INSTRUCTIONS. Pipe wrench Ratchet 3/8 socket 9/16 socket 11/16 socket 3/16 Allen key 3/32 Allen key 9/64 Allen key
ASSEMBLY and INSTALLATION INSTRUCTIONS Gas Conversion Kit Tube Heaters View these instructions online at www.lbwhite.com Kit Contents: DESCRIPTION QTY. Instructions 1 Burner orifi ce 1 Manifold pipe 1
More informationOWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL:
OWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: SERIAL NUMBER:-------- DATE PURCHASED: PURCHASED FROM:
More informationElectric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99)
1520 Electric Automatic Carpet Extractor Model No.: 607649 Operator and Parts Manual TENNANT COMPANY Commercial Products 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 1 800 678 4240 CUSTOMER SERVICE:
More informationREPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-5(120VAC), PWS 8-5(240VAC), AED-1(120VAC), AED-1(240VAC), APK-2(120VAC) & APK-2(240VAC) PART # 500002 500013 500006 500015 500008 500017
More information