BORA BORA. BORA gas: the best suns THE MODELS BORA GAS ALL INNOVATION STRENGTHS

Transcription

1 Gas boilers

2 BORA BORA gas: the best suns BORA BORA GAS IS THE NEW GENERATION OF GAS BOILERS. IT REPEATS "THE BEST SUNSHINE" THAT MADE THE BORA FAMILY A SUCCESS: THE SINGLE BLOCK BOILER CONCEPT AND ABOVE ALL ITS ORIGINAL UNIQUE HEMISPHERICAL HEAT EXCHANGER. "EVEN MORE PROGRESS" COMPRISES ESPECIALLY A NEW GENERATION GAS BURNER TO BE FITTED ON ALL NEW BOILERS, COMPACT GRACEFUL DESIGN, VERY EASY INSTALLATION, REMOTE CONTROL AND MANAGEMENT AS AN OPTION. Tried and tested heat exchanger; Safe high performance new generation burner; Fully adaptable: same model with chimney or flue; Totally silent operation; Fully simplified installation; Very user friendly operation; Remote Internet or WAP operation and control as an option. THE MODELS Two choices of power: 16/24 and 19/30 kw. Two models: Heating only (GCI); Heating plus domestic hot water (GBI). All these models can be installed with chimneys or flues. BORA GAS ALL INNOVATION STRENGTHS BORA Gas incorporates the wellknown hemispherical heat exchanger that made the BORA oil model a success, under its very graceful casing with soft rounded shapes, as well as the new safe, very high performance and cost effective air/gas premixing modulating burner, and a 130 litre indirect cylinder for the hot water model. Its especially simple user friendly control panel has the wellknown removable BORA family control unit to be operated and controlled by the Internet and WAP as an option. Its white casing is exceptional for being rigid and solid. With its silent operation and very compact size, it is installed with no problems, even in demanding places or living rooms like the kitchen, as the models are only 1.4 m high for hot water and 0.85 m for heating only. 2

3 hine, even more progress BORA GAS BURNER: EVEN MORE PROGRESS This new generation burner has total air/gas premixing. Fully preset, it groups together all functions in a compact unit perfectly built in the boiler. This burner has a variable speed fan that makes the air/gas mixture before combustion according to the power required. This mixture is continuously controlled by the combined membrane valve set with appropriate power of 65 to 100% as this fork prevents any condensation problems. Reduced speed CLOSED VALVE LOW OUTPUT Accelerated speed OPEN VALVE INCREASED OUTPUT LOW POWER FULL POWER HEAT EXCHANGER: THE BEST SUNSHINE The BORA Gas heat exchanger is the well-known body of unique design fitted on the oil model whose reliability, long life and performance are outstanding. Comprising a single piece with no connections, its hemispherical shape is technically the best as it behaves perfectly under pressure, with forces acting symmetrically on the external face. Irrigation is regular as, there being no compartments, the water temperature is uniform thereby limiting condensation risks. In short, its very large heating surface enables the thermal load to be reduced without increasing the weight of cast iron, guaranteeing very long life. Air/gas ratio modulation Combustion, round a stainless steel burner pipe lined with a sleeve provides perfect heat distribution in the BORA gas combustion chamber. This new burner s advantages are very significant: first significant improvement in performance, constant combustion quality, significant discharge reduction as the NOx rate is much less than an old generation burner s and CO discharge is very low. 3

4 BORA BORA gas: the best suns HIGH PERFORMANCE The burner heat exchanger combination is one of unrivalled efficiency especially as the BORA Gas has been particularly well insulated with complete lack of heat bridges and special ceramic insulation on the combustion chamber door. BORA Gas has performance above 93% and is classed as low temperature according to RT For a boiler of this class the pollution levels are particularly low: practically nonexistent for CO, they are below 35 mg/lkwhr for NOx. As for sound performance they are astonishing since BORA Gas is almost silent. Models Power kw 16/24 19/30 Acoustic pressure dba 43/48 45/50 UNLIMITED HOT WATER The comfortable 130 litre capacity of the built in indirect cylinder (GBI model) allows a special output of 260 litres in 10 minutes. Its enamelled steel tank fitted with generously sized horizontal coils allows reloading time under 10 minutes and guarantees perfect hygiene. Fully protected by a CFC free polyurethane shell losses on shutdown are limited to less than 74 kw. Specifications of BORA boilers according to RT Indirect cylinder performance according to RT Storage capacity l Heating surface m Storage temperature C Required output in 10 minutes* l Required continuous output T = 30 K l/h Reheating time min Cooling constant Wh/l/ C/day Nominal power** kw Room temperature at NP C Max operating pressure (domestic hot water) bar Auxiliary electric power W * According to EN ** Hot water 40 C, cold water 10 C. Specifications of BORA boilers GCI GCI GBI GBI GCVI GCVI GBVI GBVI according to RT Type of generator heating mixed heating mixed Type of boiler Low Temperature LT LT LT LT LT BLT LT LT Venting chimney flue Nominal power kw 16/24 19/30 16/24 19/30 16/24 19/30 16/24 19/30 Heat output kw 17.2/ / / / / / / /33.3 Smoke discharge kg/h Smoke volume l 5,537 6,912 5,537 6, Smoke circuit resistance mbar Required draught mbar % and 70 C load output % 93/90 92/90 93/90 92/90 93/90 92/90 93/90 92/90 30% and 50 C load output % Losses when shut down 30 K W Auxiliary electric power (burner) W Nominal water flow at NP = 15 K m 3 /h Boiler P at nominal flow mbar Water content l Max operating pressure (primary) bar Test report reference /1 Body CETIAT EC référence 0049 BM 3564

5 hine, even more progress BORA Aluminium cover Air inlet Removable integrated control unit Cast iron hemispherical single block SUM heat exchanger User control interface Fully sealed combustion circuit Assembled preset natural gas premixing burner 2 flow and 2 returns 1"1/4 thread Burner fan High power domestic hot water exchanger 130 litres tank Chrome free enamelled steel DHW heater with protective anode Rigid epoxy lacquered steel casing Base with adjustable feet BORA GBI boiler cut away section 5

6 BORA BORA gas: the best suns CONNECTION FITTINGS Horizontal flue 1 Mandatory pack: Horizontal terminal. 35 to 65 cm adjustable. Vertical flue 2 Chimney Mandatory pack: connection Vertical brick terminal (FF 00014) Vertical black terminal. "Horizontal" options Protective grating (FFVF 0009) Ø 365 Sound filter (FFVF 0008) 8 Common options 100 cm extension 50 cm extension Condensate recuperator (FFVF 0007) 7 39 to 64 cm telescopic extension (FFVF 0010) bend (FFVF 0005) Two 45 bends (FFVF 0006) "Vertical" options 15 to 30 tile fillet (FFVF 0011) à 45 tile fillet (FFVF 0012) 12 Slate fillet (FFVF 0014) Vertical layout. Horizontal outlet 1 m ducts 5 Telescopic terminal Maximum allowed length: 4 m in horizontal flue. 8 m in vertical flue. 90 bend Horizontal layout. 5 5 Horizontal layout Left or right side outlet 1 m ducts Telescopic terminal A A D B H A D Requirements A = 0.40 m: Minimum distance from centreline of burnt gas vent to any hole. B = 0.60 m: Minimum distance from centreline of burnt gas vent to any other ventilation hole. C = 1.80 m: Exhaust holes opening directly onto an outside traffic road, public or private road less than 1.80m above the ground, except for condensation equipment, shall include a fixed deflector steering the exhausted gases noticeably parallel to the wall. Exhaust holes and air intakes of sealed circuit equipment opening less than 1.80m above the ground shall be efficiently protected against any outside occurrence capable of harming their normal operation. Recommendations D = 0.30m: Distance between centres of burnt gas vent to the ground or roof overhang or above a balcony. E = 1.50m: Distance between centres of burnt gas vent to a wall at 90, with window ventilation hole. F = 0.80m: Distance between centres of burnt gas vent to a wall at 90, with no opening. G = 2.00m: Distance of burnt gas vent to a hedge or trees H = 0.10m: Distance between centres of burnt gas vent to a gutter or downpipe. D B C E F B G Telescopic terminal. 6

7 hine, even more progress BORA SIMPLE COMPLETE USER FRIENDLY CONTROL PANEL The bead on the BORA gas round edge is for showing in a flash that BORA gas is working correctly: an on indicator, on/off switch and digital display showing boiler temperature and alarm codes. An aluminium cover conceals the removable control unit control box and operating instructions. 1 Remote control box 2 Fuse 3 On indicator 4 On/Off luminous switch 5 Digital display 6 Operating button 7 Operating connector Removable control unit on control panel The control box can be located on a base in a room in the house, the lounge for example. Under these conditions, it controls the ambience and enables all operation settings to be remotely changed or read. If the box rests on the boiler, the controls then work only according to the outside temperature. 7

8 BORA BORA gas: the best suns Removable control unit on control panel The BORA control unit provides optimised boiler control, controlling modulation of the burner and indirect cylinder. It automatically adjusts boiler temperature depending on the outside temperature or ambient temperature Ambience module in setting position The settings and displays may be accessed when the ambience module door is open. Pressing 2 and 3 will scroll the menu. The required setting is displayed clear on the screen. To change the setting, just press 1 and the light comes on. The 2 and 3 keys are used to change the settings. Pressing 1 validates the action and the light goes out. 1 Heating mode selection key. Standby, Programme, Always on, always on at low temperature, DHW only always on. 2 Temporary programme override key 3 Comfort ambient temperature setting 4 Operating and setting parameter display screen. Regulating a direct system with domestic hot water. Accessible user functions Outside temperature Time Day Required comfort ambient temperature Required reduced ambient temperature Required tank temperature Daily programming (3 periods per day) Holiday shutdown programming Access to controls (for heating engineer only) Standard programme Measured temperature in hot water tank Heating engineer settings Language (F, D, GB, FI, E) Bus address Slope Max flow temperature Self-adaptation Ambience effect Ambience calibration Optimisation Fumes venting type choice Legionnaires disease prevention (active, inactive) DHW mode: 24 hours a day As programmed Valve motor (time setting) Heating engineer display Boiler set temperature Boiler temperature Flow set temperature Flow temperature Number of burner stops Number of burner operating hours Software ID Programme standard Regulating a valve controlled heating system with domestic hot water production. Regulating two heating systems, one of which has valve control and domestic hot water (requiring the additional ambience module for the 2 nd system and additional 3 valve control module for the 2 nd system). 2 8 Regulating two valve controlled heating systems with domestic hot water (requiring the additional ambience module for the 2 nd system and additional 3 valve control module for the 2 nd system).

9 hine, even more progress BORA CONTROL UNIT ACCESSORIES BM: outside sensor (supplied). MM1 option: additional 3-way valve control module for 2 nd system. Optional flow sensor. Optional additional room temperature for 2 nd system. Optional MT31: telephone interface. BORA HEATING MODULES The advantages: time saving during installation; can be fitted on boiler left or right side; neat finish; heat insulated pipes and modules. 1. Heating module for system with no mixer valve (ref: ) Intended for: boiler with or without control unit directly controlling burner for a radiator system. Packaging: Delivered in 1 package ref: (module 1). 2. Heating module for system with no mixer valve but with differential valve (ref: ) Intended for: boiler with or without control unit directly controlling burner for a radiator system. The differential valve balances pressure in the event of the thermostat valves on the radiator system closing. Packaging: Delivered in 2 packages (1 module 1 package ref: and 1 differential valve package ref: ). 3. Heating module for circuit with 3-way valve with no motor (ref: ) Intended for: boiler with or without control unit controlling valve and burner for a radiator circuit or underfloor heating. Packaging: Delivered in 1 package ref: (module 3). Module 1. Module 2. Module 3. Boiler Example of connection with differential valve diagram. Boiler Mandatory mixing valve Example of connection layout. 9

10 BORA BORA gas: the best suns 4. Heating module for circuit with 3-way valve with no motor and differential valve (ref: ) Intended for: boiler with or without control unit controlling valve and burner for 1 radiator circuit with thermostat valve or underfloor heating. Packaging: Delivered in 2 packages (1 module 3 package ref: and 1 differential valve package ref: ). 5. Heating module for 2 circuits with one of them on 3-way valve with no motor (ref: ) Intended for: boiler with control unit controlling 2 circuits, first circuit radiator or underfloor heating, second circuit exclusively radiators with differential valve. For one DHW production boiler this module is for making 2 heating circuits. Packaging: Delivered in 4 packages (1 module 1 package ref: , 1 module 3 package ref: , 1 manifold package ref: and 1 differential valve package ref: ). 6. Heating module for 2 circuits on two 3-way valves with no motor (ref: ) Intended for: boiler with control unit controlling 2 circuits, acting on two 3-way valves. Packaging: Delivered in 4 packages (2 module 3 packages ref: , 1 manifold package ref: and 1 differential valve package ref: ). 7. Valve motor with QAD 21 output sensor and VFAS (ref: ) 8. Insulated connection piping (ref: ) Intended for: Connecting above modules, on BORA boilers. These insulated pipes are fitted on the left or right of the boiler. Possibility of connecting the safety module and expansion tank (not supplied). Packaging: delivered in 1 package. 9. Safety module (ref: ) Intended for: This insulated module consists of a safety valve, degasser and pressure gauge. The safety valve is fitted on the insulated connection pipes. It cannot be fitted separately. The connection pipe is delivered separately depending on the boiler. Module 4. Module 5. Modules 6. Module 3 with valve motor as option. BORA pipes. Boiler Examples of radiator or underfloor heating connection layout. Boiler Example of connection layout. Boiler Example of connection layout. 2 output sensors delivered with all our valve motors. Piping mounted operation. Safety module. 10

11 hine, even more progress BORA 10. Electronic low water level pressostat (ref: ) 11. ECO heating module (ref: ) Module for a heating system on mixing valve with motor, fitted on left or right of boiler (option for fitting two modules on left and right). ECO heating module 12. Domestic hot water module (ref: ) This domestic hot water module incorporates all connection, safety and setting functions. ECO heating module and ECO domestic hot water module. INSTALLATION IN A FLASH All BORA Gas models can be installed either on a chimney or flue simplifying the choice. GBI or GBI boilers are delivered in one single package, ready for installation. Connection For heating, BORA has 2 outputs and 2 returns that can be used without constraints: on the right, on the left and even diagonally. Offsetting the branch lines relative to the 125 mm diameter draught diverter makes connections easier. The BORA is fitted with a gas stop valve on its rear face for more safety. The electrical connections are simplified. Connection and gas tap. ECO heating module. They are made on an easily accessible specific terminal strip outside the fascia. 11 Delivery of boiler, burner, indirect cylinder and control unit in a single pack. All BORA boilers, whatever the output or model (CCI, GBI)are delivered in a single pack to the engineer, ready for installation. logistics are simpler, making delivery faster; the indirect cylinder is connected, the pipes are factory fitted and the control device is pre-set: no assembly is required on site; considerable time is saved and nothing is forgotten; for the flue model, flue pack in addition. Easy maintenance All BORA components are directly accessible from the front of the boiler. To access the burner and heat exchanger, it is only necessary to remove the screw which holds the front panel in position. This is the only part that has to be removed for servicing and repairs. Opening the door gives full access to all the heating surfaces and also to the draught diverter. All surfaces can be cleaned from the front using the brush supplied with the boiler. For the flue models, after removing the burner cover, access is identical. The two vertical and horizontal terminals are fitted with movable endpieces for cleaning the pipes.

12 The best sunshine even more progress BORA GCI/GCVI 730 BORA GBI/GBVI 1/2" Ø drain Ø pipe 80/125 flue 1,398 1/2" Ø drain Ø pipe 80/125 flue 852 3/4" Ø DHW flow , /2" Ø male gas inlet 1, /4" Ø cold water inlet 3/4" Ø recirculation 1/2" Ø male gas inlet BORA GBI GCI GBVI GCVI 24/30 24/ Number of elements Single block Combustion chamber depth P mm Drain cock diameter 1/2" 1/2" 1/2" 1/2" DHW heater capacity l Electricity supply 230 V - 50 Hz Packed weight kg Net weight kg Head Office: 157, Avenue Charles-Floquet Le Blanc-Mesnil Cedex - France Telephone: Fax: Limited Company With Euro Capital R.C.S. BOBIGNY B A.P.E 282 D 1"1/4 heating flow 1"1/4 heating retur 1"1/4 heating flow 1"1/4 heating return BORA SUPPLIED Standard o Option GBI GCI GBVI GCVI GENERAL FEATURES Cast iron hemispherical single block heat exchanger (high performance low temperature) White epoxy lacquered steel casing used as sound insulated burner casing Optimized glass wool insulation Control panel with control unit and outside sensor usable remotely as room temperature module: - 1 boiler switch - 1 power on indicator - 1 digital temperature and fault display - 1 boiler safety indicator - 1 fuseholder - 1 maintenance switch - 1 maintenance connector - 1 socket for room temperature and control module Ecological factory fitted and preset in series natural gas burner 1 horizontal indirect cylinder with - chromeless enamelled steel and heat exchanger CFC free injected polyurethane insulation -inspection trap at the front with checkable anode -indirect cylinder pre-connected with pre-wired pump and 1 non return valve 80/125 mm concentric flow separator ACCESSORIES Cleaning brush, burner key Pre-fitted drain cock Base with adjustable feet Two 1"1/4 male flow connectors Two 1"1/4 male return connectors Box with outside sensor, DHW sensor, 2 oil hoses and wall mounting for remote control Delivered in 1 pack on pallet Mandatory flue accessories: Horizontal or vertical flue pack OPTIONS o o o o "Comfort Web" box for remote control o o Control unit accessories, heating module o Correx forced current anode o o Castor kit for pallet Groupe Multimedia Prescriptel RC Paris B Réf. CH EX This document is not legally binding and is not of a contractual nature. Technical specifications are provided for reference purposes only.