RETAIL PARTS CATALOG Prices are as of and are subject to change based on supplier increases

Size: px

Start display at page:

Download "RETAIL PARTS CATALOG Prices are as of and are subject to change based on supplier increases"

Lambert Montgomery
6 years ago
Views:

1 Nature s Comfort LLC., 3790 N SR 5, Shipshewana, IN Phone: ext RETAIL PARTS CATALOG Prices are as of and are subject to change based on supplier increases The following pages contain a list of items available through Nature's Comfort with the last page to be used for ordering. ALL ORDERS MUST BE ED OR FAXED TO BE PROCESSED TIMELY & ACCURATELY parts@naturescomfortllc.com Fax: Page 1

BP Hanging Heaters Hanging Heaters for Home and Shop Item BTU/Hr Retail Built-in 120v blower BP050 50,000 $420.00 BP100 100,000 $630.00 BP150 150,000 $882.00 BP200 200,000 $1,167.

Item Btu/Hr Retail AH070 70,000 $966.00 AH095 95,000 $1,014.30 AH115 115,000 $1,049.72 AH135 135,000 $1,091.58 AH150 150,000 $1,127.00 AH195 195,000 $1,262.80 AH220 220,000 $1,288.

2 BP Hanging Heaters Hanging Heaters for Home and Shop Item BTU/Hr Retail Built-in 120v blower BP050 50,000 $ BP ,000 $ BP ,000 $ BP ,000 $1, Air Handlers Includes heat exchanger (1" sweat fittings), 4 speed blower (AH070 is 3-speed), filter, filter rack and 24vac controls ***Please call for a shipping quote*** Sidearm Heat Exchangers Item Btu/Hr Retail AH070 70,000 $ AH095 95,000 $1, AH ,000 $1, AH ,000 $1, AH ,000 $1, AH ,000 $1, AH ,000 $1, Item HX Length Description Retail SAS1 25" Sweat ports $ SAT1 25" Threaded ports $ " dia. with (7) 3/8 tubes inside, 3/4" end ports and 1" side ports. Length of shell is 25". These are true tube and shell as opposed to 1 tube within another. 125,000BTU/Hr with the following parameters: DW: 50F EWT at the bottom, BW: 160F EWT at the top-side port = 2.1gpm DW flow, 8.5gpm BW flow. DW leaves sidearm at 130F for 15 minute recovery time on a 50gal water heater. Refer to NC manual for installation. Water to Water Plate Heat Exchangers Item BTU/Hr Retail 20% discount on up to 2 units if PLT " ports $ purchasing w/boiler!!! PLT " x 3/4" ports $ Overall Size: ~ 5" x 12" PLT " ports $ BTU rating is boiler house EWT PLT " ports & both sides at 15 GPM PLT " ports $ ***Min. 20 plate for DHW or boiler loop*** PLT " ports $ PLT " ports $ PLT " ports $ PLT " ports $ L Stainless Steel Tube & Shell Pool Heat Exchangers (not for saltwater pool) Item BTU/Hr (gallons) Ports (Side) (Ends) length/width Retail SSP55 55,000 4, " 1" 14.15/2.36" $ SSP85 85,000 7, " 1" 20.47/2.36 $ SSP ,000 13, " 1" 17.71/2.99" $ SSP ,000 18, " 1.5" 22.44/2.99" $ SSP ,000 25,800 2" 1.5" 30.71/2.99" $ SSP ,000 31,500 2" 1.5" 32.68/3.5" $ SSP ,000 52, " 2" 35.43/4.48" $ SSP1200 1,200, , " 2" 35.43/5.23" $ Page 2

3 Titanium Tube & Shell Pool Heat Exchangers (for use with saltwater pools) Item BTU/Hr (gallons) Ports (Side) (Ends) length/width Retail STP55 55,000 4, " 1" 14.15/2.36" $ STP85 85,000 7, " 1" 20.47/2.36 $ STP ,000 13, " 1" 17.71/2.99" $ STP ,000 18, " 1.5" 22.44/2.99" $ STP ,000 25,800 2" 1.5" 30.71/2.99" $ STP ,000 31,500 2" 1.5" 32.68/3.5" $1, STP ,000 52, " 2" 35.43/4.48" $1, STP1200 1,200, , " 2" 35.43/5.23" $2, Water to Air Heat Exchangers 12 Fins Per Inch, 3 Rows of 3/8" Tubes, Ports are on the side of the first number in the dimension size Manifold Inlet & Outlet 1" Sweat, BTU rating is at 65EAT, 180EWT, 10GPM - (CFM varies) Outside Dimensions Item BTU/CFM (Not including manifold) Retail HX ,892/ /4"x14"x3 1/2" $ % discount on up to 2 units if purchasing w/boiler!!! HX ,837/ /4"x17"x3 1/2" $ HX ,927/ /4"x18"x3 1/2" $ HX ,846/ /4"x20"x3 1/2" $ HX ,114/ /4"x23"x3 1/2" $ HX ,015/ /4"x26"x3 1/2" $ HX ,749/ /4"x16"x3 1/2" $ HX ,927/ /4"x18"x3 1/2" $ HX ,637/ /4"x20"x3 1/2" $ HX ,032/ /4"x17"x3 1/2" $ HX ,150/ /4"x20"x3 1/2" $ HX ,572/ /4"x23"x3 1/2" $ HX ,362/ /4"x26"x3 1/2" $ HX ,465/ /4"x18"x3 1/2" $ HX ,424/ /4"x20"x3 1/2" $ HX ,445/ /4"x22"x3 1/2" $ HX ,465/ /4"x24"x3 1/2" $ HX ,395/ /4"x20"x3 1/2" $ HX ,083/ /4"x22"x3 1/2" $ HX ,761/ /4"x23"x3 1/2" $ HX ,336/ /4"x24"x3 1/2" $ HX ,223/ /4"x26"x3 1/2" $ HX ,690/ /4"x22"x3 1/2" $ HX ,254/ /4"x21"x3 1/2" $ HX ,828/ /4"x22"x3 1/2" $ HX ,124/ /4"x24"x3 1/2" $ HX ,214/ /4"x27"x3 1/2" $ HX ,657/ /4"x23"x3 1/2" $ HX ,668/ /4"x24"x3 1/2" $ HX ,613/ /4"x26"x3 1/2" $ HX ,433/ /4"x27"x3 1/2" $ HX ,900/ /4"x26"x3 1/2" $ HX ,490/ /4"x27"x3 1/2" $ HX ,457/ /4"x32"x3 1/2" $ HX ,973/ /4"x30"x3 1/2" $ HX ,352/ /4"x32"x3 1/2" $ Page 3

Baseboard Heaters Item 3/4 pipe, 590 BTU/ft/hr@4gpm Retail BH2 2' Baseboard heater $28.23 BH3 3' Baseboard heater $39.59 BH4 4' Baseboard heater $46.51 BH5 5' Baseboard heater $82.

44 BHIC Inside corner joint $10.47 BHOC Outside corner joint $14.70 BHEN 5' Enclosure for concealing pipe $47.87 Boiler Treatment One quart treats up to 200 gallons, 1000-1500ppm (500ppm min.

00 Boiler Treatment Test Kits *** NOTE: Boiler treatment test kits have an expiration date*** BTK10 Performs up to 10 Tests $18.

4 Baseboard Heaters Item 3/4 pipe, 590 Retail BH2 2' Baseboard heater $28.23 BH3 3' Baseboard heater $39.59 BH4 4' Baseboard heater $46.51 BH5 5' Baseboard heater $82.08 BH6 6' Baseboard heater $74.01 BH7 7' Baseboard heater $ BH8 8' Baseboard heater $96.14 BHC Joint or wall end cover $4.90 BHR Right side end cover $8.44 BHL Left side end cover $8.44 BHIC Inside corner joint $10.47 BHOC Outside corner joint $14.70 BHEN 5' Enclosure for concealing pipe $47.87 Boiler Treatment One quart treats up to 200 gallons, ppm (500ppm min.) of Nitrite concentration must be maintained at all times. BT1 1-1 Quart Bottle $21.00 BT12 Case of 12 $ Boiler Treatment Test Kits *** NOTE: Boiler treatment test kits have an expiration date*** BTK10 Performs up to 10 Tests $18.20 of nitrite concentration in PPM Draft Blowers DB-NCB 148 CFM Blower for NCB-120 thru 250 $70.00 DB-325G 273 CFM Blower for NCB-325G $84.00 DB-GT220/ /409 CFM 2 Speed Blower for GT's $ DB-GT6000 1/4HP, 2860rpm $ Rubber Flappers FLAP-SML Intake Flapper for NCB-80 thru 250 $2.80 FLAP-LRG Intake Flapper for NCB-325G $4.20 Temperature Gauge Solenoid TG Degrees, plugs in to $ /2" NPT drywell (included) SLD 110VAC Solenoid 7Lb lift $36.00 (for NCB boilers) Page 4

Motion Light LTM Motion Light for NCB Boilers $13.72 LTM-SLR LED Solar Motion Light $24.

00 Thermostats for Hanging Heaters, Zones & More WTS-120V 120v ht or cl wall T-stat, range

5A motor, 22A resistive PTS 120v Plug in T-stat, range -10F to100f, $65.98 6F diff., 13.

80 Fan-Auto/On, Digital Backlit TSD-140L Thermal limit snap disc - opens @ 140F $9.

aquastat) TSD-180L Thermal limit snap disc - opens @ 180F $9.

10 (NC-30 & NC-40 exhaust temp switch) Relays, Power Supply Description ***No bases

PS-24VAC) $17.50 RL-110AC 110vac coil, 2 pole (GT-220 relay) $17.

5 Motion Light LTM Motion Light for NCB Boilers $13.72 LTM-SLR LED Solar Motion Light $24.64 Ash Pan Latch Kit APLK Includes latch & catch w/ holes $14.00 Thermostats for Hanging Heaters, Zones & More WTS-120V 120v ht or cl wall T-stat, range 50-90, $ h/4c diff., 4.5A motor, 22A resistive PTS 120v Plug in T-stat, range -10F to100f, $ F diff., 13.8A motor, 22A resistive WTS-24V 24v ht/off/cl wall T-stat, range 40-90, $37.80 Fan-Auto/On, Digital Backlit TSD-140L Thermal limit snap disc - 140F $9.10 (place on boiler line coming into house and wire in series with an indoor boiler aquastat) TSD-180L Thermal limit snap disc - 180F $9.10 (GT-6000 safety T-stat) TSD-120F Fan Control snap disc - 120F $9.10 (NC-30 & NC-40 exhaust temp switch) Relays, Power Supply Description ***No bases included with relays*** Item 10amp/250v contacts Retail RL24AC 24vac coil, 2 pole (use PS-24VAC) $17.50 RL-110AC 110vac coil, 2 pole (GT-220 relay) $17.50 RLB-8-ROUND 8-pin relay base $9.10 PS-24VAC 24VAC, 50VA power supply for use $35.00 with t-stat & relay to run pumps, zone valves or furnace blowers Float Assemblies FLT-RF CPVC construction w/ $15.00 rubber cap for older NCB boilers FLT-SS 2.5" SS Float w/rod $53.20 (For models 2009 & later) Page 5

Ranco Digital Aqua-Stat Honeywell Aqua-Stat Brass Drywell RDDW 3 degree swing $120.

00 (w/o drywell) BDW 1/2" threads $15.00 (Make sure to purchase caulk for installing) Rope Seal RS100 1" Round Fiberglass $1.

05 Length needed for: Feet GT Smoke Bypass Door 3 GT Lower, Rear Access Cover 4 High Temperature Silicone Caulk SCN 600 degree

5" x 6" x 2" for NCB's $7.00 FBK-SM 9" x 4.5" x 1.25" for GT's or NCB-COAL $2.

6 Ranco Digital Aqua-Stat Honeywell Aqua-Stat Brass Drywell RDDW 3 degree swing $ (w/ drywell) RD 3 degree swing (w/o drywell) $98.00 HWDW 5 degree swing $ (w/ drywell) HW 5 degree swing $84.00 (w/o drywell) BDW 1/2" threads $15.00 (Make sure to purchase caulk for installing) Rope Seal RS100 1" Round Fiberglass $1.65 Length needed for: Feet NCB-120,175,250 & GT's 9 NBC-325G 12 Ash Pan 4 RS050 1/2" Round Fiberglass $1.05 Length needed for: Feet GT Smoke Bypass Door 3 GT Lower, Rear Access Cover 4 High Temperature Silicone Caulk SCN 600 degree silicone $ oz tube (Black) for sealing chimney/float stack & securing rope seal Fire Brick FBK 11.5" x 6" x 2" for NCB's $7.00 FBK-SM 9" x 4.5" x 1.25" for GT's or NCB-COAL $2.80 (17 small bricks needed for lining firebox when installing bumper grates) Cleaning Brushes BRSH-KIT-3" 3 Wire Brush Kit $56.00 (Brush, Handle & Extension) BRSH-3" 3 Wire Brush $21.00 BRSH-EXT 4' Nylon Extension Rod $21.00 BRSH-HNDL Handle $19.60 BRSH-PLT 1/2" - 1" x 36" Pellet Stove Brush $14.00 Page 6

GT Damper Actuator DCDA 12/24VDC 150 in/lbs $67.

50/60Hz $32.20 Out: 24VDC 3A DCPS-12 Charger for 12V 0.

00 GT Cycle Timer Relay GT Light w/light Sensor TMR

00 smoldering out during milder weather (for GT boilers)

40 and fluorescent bulb GT SS Catalytic Converter GTSSCC

10 (GT-220 & 500 Boilers use 6 total) Trouble Shooting

30 includes batteries, spare pins & protective cap IRTG

50 1:9 Ratio, backlit display, includes AAA Ball Valves

48 BVPP050 1/2" Pex x Pex ball valve $6.

7 GT Damper Actuator DCDA 12/24VDC 150 in/lbs $67.20 GT Boiler DC Power Supplies DCPS-24 In: VAC 50/60Hz $32.20 Out: 24VDC 3A DCPS-12 Charger for 12V 0.8aH SLA Battery $21.00 DCBAT 12V 0.8aH SLA Battery $35.00 GT Cycle Timer Relay GT Light w/light Sensor TMR Optional relay if having trouble with fire $70.00 smoldering out during milder weather (for GT boilers) GTLT Light for GT Boilers with light sensor $36.40 and fluorescent bulb GT SS Catalytic Converter GTSSCC (1) 3"x2" SS Catalytic Converter Disc $23.10 (GT-220 & 500 Boilers use 6 total) Trouble Shooting Tools MSMTR Digital Moisture meter, reads 6-44%, $97.30 includes batteries, spare pins & protective cap IRTG Infrared Temperature Thermometer $ :9 Ratio, backlit display, includes AAA Ball Valves BV050 1/2" FPT ball valve $5.39 BV075 3/4" FPT ball valve $7.70 BV100 1" FPT ball valve $11.48 BVPP050 1/2" Pex x Pex ball valve $6.65 BVPP075 3/4" Pex x Pex ball valve $8.40 BVPP100 1" Pex x Pex ball valve $11.55 BVTP050 1/2" MPT x Pex ball valve $7.35 BVTP075 3/4" MPT x Pex ball valve $10.43 BVTP100 1" MPT x Pex ball valve $14.56 BVTF100 1" FPT x Swivel Flange ball valve $18.83 Page 7

8 Fittings PEX /2" Pex 90 $0.84 PEX /4" Pex 90 $1.61 PEX " Pex 90 $2.34 PEX CP-050 1/2" Pex Coupling $0.56 PEX CP-075 3/4" Pex Coupling $2.03 PEX CP-100 1" Pex Coupling $1.68 PEX T-050 1/2" Pex T $1.19 PEX T-075 3/4" Pex T $3.85 PEX T-1X1X50 1" x 1" x 1/2" Pex T $3.15 PEX T-1X1X75 1" x 1" x 3/4" Pex T $3.15 PEX T-100 1" Pex T $3.43 PEX x FPT-050 1/2" Pex x 1/2" Fem NPT $1.89 PEX x FPT-075 3/4" Pex x 3/4" Fem NPT $2.03 PEX x FPT-100 1" Pex x 1" Fem NPT $4.90 PEX x MPT-050 1/2" Pex x 1/2" Male NPT $1.47 PEX x MPT-075 3/4" Pex x 3/4" Male NPT $2.04 PEX x MPT-1X75 1" Pex x 3/4" Male NPT $3.09 PEX x MPT-100 1" Pex x 1" Male NPT $3.15 PEX x FSWT-050 1/2" Pex x 1/2" Fem Sweat $0.85 PEX x FSWT-075 3/4" Pex x 3/4" Fem Sweat $1.29 PEX x FSWT-100 1" Pex x 1" Fem Sweat $3.08 PEX x MSWT-050 1/2" Pex x 1/2" Male Sweat $0.56 PEX x MSWT-075 3/4" Pex x 3/4" Male Sweat $1.89 PEX x MSWT-100 1" Pex x 1" Male Sweat $3.50 PEX CRIMP050 1/2" Black Copper Crimp Ring $0.35 PEX CRIMP-075 3/4" Black Copper Crimp Ring $0.38 PEX CRIMP-100 1" Black Copper Crimp Ring $0.42 PEX CINCH-050 1/2" SS Cinch Clamp $0.42 PEX CINCH-075 3/4" SS Cinch Clamp $0.49 PEX CINCH-100 1" SS Cinch Clamp $0.56 PEX TOOL-SS Pex Tool for all SS Cinch Clamp Sizes $35.00 Mixing Valves MXV075-THD Brass mixing valve, 3/4" ports, $ MXV075-PEX 23 GPM - For DHW or radiant systems, $ MXV075-SWT Threaded, PEX or Sweat Ports $ Closed Loop Radiant System Componenets EXPTNK gal expansion tank, 12x8 $50.40 EXPTNK gal expansion tank, 14x11 $58.80 (both 1/2" npt) PRSRG Pressure regulator, 1/2" NPT, 3-50psi, $ /4" pressure gauge port, for maintaining 15psi on a closed loop system. BKFLP Backflow preventer, dual check, $91.00 vented, 1/2" NPT unions Page 8

PG60 0-60psi pressure gauge, 1/4"npt $91.00 Other radiant floor components TGPG Pressure/temp gauge, 1.6" stem, 1/4"npt $21.00 0-75psi, 60-260F ARSEP Air Separator, 1" Thd ports $21.

00 24vac 2-wire motor, N/O, spring return, has manual operating lever Manifolds & Connectors - We can join multiple sets togther for more loops per zone!

60 drain/fill valve MFLD-100X3 MFLD-100X4 1" Brass Manifold x (3) 3/4" ports with ball valves, automatic air vent, $137.

05 2 or more manifolds together) MFLD-PEX-CNCTR 3/4" Manifold port x 1/2" pex $3.

9 PG psi pressure gauge, 1/4"npt $91.00 Other radiant floor components TGPG Pressure/temp gauge, 1.6" stem, 1/4"npt $ psi, F ARSEP Air Separator, 1" Thd ports $ /8" air port, needs ARBLD (next item) ARVT Automatic Air Vent, 1/8" NPT inlet, $14.00 for use with air separator ZNV-100 1" motorized zone valve, solder ports, $ vac 2-wire motor, N/O, spring return, has manual operating lever Manifolds & Connectors - We can join multiple sets togther for more loops per zone! (Ask for quote) MFLD-100X2 1" Brass Manifold x (2) 3/4" ports with ball valves, automatic air vent, $ drain/fill valve MFLD-100X3 MFLD-100X4 1" Brass Manifold x (3) 3/4" ports with ball valves, automatic air vent, $ drain/fill valve 1" Brass Manifold x (4) 3/4" ports with ball valves, automatic air vent, $ drain/fill valve MFLD-CNCTR 1" Manifold Connector (For joining $ or more manifolds together) MFLD-PEX-CNCTR 3/4" Manifold port x 1/2" pex $3.50 (other sizes available upon request) Armstrong Pump Performance curves are available for all pumps on request Model E9 Armflo Circulator Pump E9.2 Pump High flow - high head $ gpm, ft - Motor: 120V, 1 Phase, 2 Pole, Speed: 3250 rpm, Nominal Power: 1/6 hp (125w), FLA 2.0amps E9.2 Seal Kit E9.2 Replacement seal kit $56.00 Broeder Pumps BN39-20 Med. flow - high head, 3 speed $ US gpm, 0-39ft BN39-20-CRTG Replacement cartridge $65.00 BN39-20-REFURBRefurbished BN39-20 $ (If in stock) BN29-7 Low flow, low head, 1/2" npt unions $ gpm, 0-28ft, manual or flow switch Page 9

Taco Pumps TACO11 High flow - high head $294.00 0-31gpm, 0-31ft TACO2400 High flow - high head $413.

head, 3 speed $147.00 0-17gpm, 0-19ft Pump Flange Kit PF100 1" Thd. Flange Kit $8.

50 (You will need to locally purchase a 3/8" plug or valve for the blow-off port.) YSCR100 Replacement ss screen $17.

00 for tying down boilers and pipe to trailers (Hook is bent enough to fit through trailer side rail) SS304 Chimney Pipe, Caps, Elbows,

80 CP636 6" x 36" Ext. (Single Wall) $70.00 CP648 6" x 48" Ext. (Single Wall) $85.99 CPC6 6" Rain Cap w/ spark arrestor $65.

10 Taco Pumps TACO11 High flow - high head $ gpm, 0-31ft TACO2400 High flow - high head $ gpm, 0-34ft Mechanical Seal Specifically Designed For Wood Boilers Grundfos Pump Model UPS GP1558 Med. flow - med. head, 3 speed $ gpm, 0-19ft Pump Flange Kit PF100 1" Thd. Flange Kit $8.40 (w/ bolts, nuts, and o-rings) Y-strainer YST100 1" Y Strainer, cast iron $24.50 (You will need to locally purchase a 3/8" plug or valve for the blow-off port.) YSCR100 Replacement ss screen $17.50 STRAP-CARGO 2" rachet cargo strap w/ flat hooks $35.00 for tying down boilers and pipe to trailers (Hook is bent enough to fit through trailer side rail) SS304 Chimney Pipe, Caps, Elbows, Etc. Item 6" - All models save NCB-80,120,575 Retail CP612 6" x 12" Ext. (Single Wall) $29.65 CP624 6" x 24" Ext. (Single Wall) $50.80 CP636 6" x 36" Ext. (Single Wall) $70.00 CP648 6" x 48" Ext. (Single Wall) $85.99 CPC6 6" Rain Cap w/ spark arrestor $65.50 CPT6 6" T w/end cap (Single wall) $98.41 CP90-6 6" 90 Elbow $46.88 CP45-6 6" 45 Elbow $38.91 CPB6 6" pipe clamp $ " for NCB-120 Other sizes, fittings, thimbles, flashings and supports are also available! (SS316 as well) CP512 5" x 12" Ext. (Single Wall) $28.13 CP524 5" x 24" Ext. (Single Wall) $48.84 CP536 5" x 36" Ext. (Single Wall) $68.36 CP548 5" x 48" Ext. (Single Wall) $87.66 continued on next page Page 10

CPC5 5" Rain Cap w/ spark arrestor $59.14 CPT5 5" T w/end cap (Single wall) $94.71 CP90-5 5" 90 Elbow $46.85 CP45-5 5" 45 Elbow $41.28 CPB5 5" Pipe clamp $18.62 4" for NCB-80 CP448 4" x 48" Ext.

75 CP612A 6" x 12" Class-A Ext. (Double Wall) $64.14 CP624A 6" x 24" Class-A Ext. (Double Wall) $120.23 CP636A 6" x 36" Class-A Ext. (Double Wall) $160.23 CP648A 6" x 48" Class-A Ext.

(SS316 as well) 3 Wrap Insulated Pex Pipe Shipping is only $65 if delivered with a boiler! Item Length Retail/ft PD3 250ft or 300ft $6.00 Any other length $6.50 ***1.

Item Length Retail/ft PD4 250ft or 300ft $9.00 Any other length $9.50 Each layer is 7mm for a total of 28mm, over 1" thick!

11 CPC5 5" Rain Cap w/ spark arrestor $59.14 CPT5 5" T w/end cap (Single wall) $94.71 CP90-5 5" 90 Elbow $46.85 CP45-5 5" 45 Elbow $41.28 CPB5 5" Pipe clamp $ " for NCB-80 CP448 4" x 48" Ext. (Single Wall) $80.24 CPC4 4" Rain Cap w/ spark arrestor $48.90 Class A Double Wall Insulated CPB6A Galv. Pipe Brace " w/ SS Clamp $98.10 CPAD 6" Single Wall to Class-A adptr (black) $37.75 CP612A 6" x 12" Class-A Ext. (Double Wall) $64.14 CP624A 6" x 24" Class-A Ext. (Double Wall) $ CP636A 6" x 36" Class-A Ext. (Double Wall) $ CP648A 6" x 48" Class-A Ext. (Double Wall) $ CPCA6 6" Class-A Rain Cap w/spark Arrestor $84.90 CPTA6 6" Class-A T w/ end cap $ Other sizes, fittings, thimbles, flashings and supports are also available! (SS316 as well) 3 Wrap Insulated Pex Pipe Shipping is only $65 if delivered with a boiler! Item Length Retail/ft PD3 250ft or 300ft $6.00 Any other length $6.50 ***1.25" size, oxygen barrier &/or additional tubes available upon request*** Platinum 4 Wrap Insulated Pex Pipe Shipping is only $65 if delivered with a boiler! Item Length Retail/ft PD4 250ft or 300ft $9.00 Any other length $9.50 Each layer is 7mm for a total of 28mm, over 1" thick! ***oxygen barrier &/or additional tubes available upon request*** Drain Tile Tape Please or call for a shipping quote on any insulated pex pipe PD Splice Tape Drain Tile Splice/Repair Tape (per ft) $0.00 Rubber Heater Hose HTRHS /4" Heater Hose - 50' Roll $63.00 Highly flexible for easily running a water line where a tight bend is required Fits 1" PEX fittings & clamps Potable Water Pex Pipe (no oxygen barrier) Item Color Diameter Coil Length Retail/ft PNB012-B-(length) PNB012-R-(length) PNB034-B-(length) PNB034-R-(length) PNB100-B-(length) PNB100-R-(length) PNB114-B-0500 PNB114-R-0500 BLUE 1/2" 100, 250 RED BLUE 100, 250, 500 3/4" RED or 1,000 BLUE 100, 250, 500 1" RED or 1,000 BLUE 1-1/4" 500 RED Page 11 $0.20 $0.33 $0.53 $1.16

Oxygen Barrier Pex Pipe Item POB012-B-(length) POB012-R-(length) POB034-B-(length) POB034-R-(length) POB100-B-(length) POB100-R-(length) POB114-B-0500 POB114-R-0500 Color Diameter Coil Length

55 Cast Iron Coal Bumper Grates CGBMPR 1 frame & 2 centers $105.00 For drop-in field installation on NCB-120 & 175 (2 sets needed).

12 Oxygen Barrier Pex Pipe Item POB012-B-(length) POB012-R-(length) POB034-B-(length) POB034-R-(length) POB100-B-(length) POB100-R-(length) POB114-B-0500 POB114-R-0500 Color Diameter Coil Length Retail/ft BLUE 100, 250, 500 1/2" RED or 1,000 BLUE 100, 250, 500 3/4" RED or 1,000 BLUE 100, 250, 500 1" RED or 1,000 $0.28 $0.46 $0.67 BLUE RED 1-1/4" 500 $1.55 Cast Iron Coal Bumper Grates CGBMPR 1 frame & 2 centers $ For drop-in field installation on NCB-120 & 175 (2 sets needed). The NCB-250 & 325G require additional modification and is at your own risk (3 sets needed). All 4 models can be ordered with the bumper grate package pre-installed ($250 & $350). Centers are rocked by bumper arm that must be field installed on ash pan. 1/4" flat stock is needed on either side to center on grate support and to hold back small firebrick needed for lining firebox (Must be purchased separately) ***17 FBK-SML needed*** Pellet Stove Parts NC-40 & 30 Description Retail PS-PD Power Distributor $42.00 PS-HS Hopper Switch $16.80 PS-VS Vacuum Switch $31.50 PS-AM Auger Motor $63.00 PS-AMC Capacitor for Auger Motor $6.99 PS-IG Igniter $16.80 PS-EB Exhaust Blower $44.81 PS-WH wire harness $37.38 PS-SW Sensor wire - specify: high temp (92C), $5.60 vacuum, exhaust temp(52c), lid switch, or room temp(30c) PS-125F 125F Exhaust Blower Temp Sensor $6.99 PS-200F 200F Rear Heat Shield Temp Sensor $7.00 NC-40 PS40-CP Control Panel $63.00 PS40-CV Convection Fan $42.00 PS40-BP Burn Pot $28.00 PS40-DL door latches $4.20 PS40-VBB Back Vermiculite board $21.00 PS40-VBS Side Vermiculite board $14.00 NC-30 PS30-CP Control Panel $63.00 PS30-CV Convection Fan $42.00 PS30-BP Burn Pot $28.00 PS30-VBB Back vermiculite board $21.00 PS30-VBS Side vermiculite board $28.00 Page 12

13 Solar Water Heater Parts SM-DR Black rubber dust ring $1.40 SM-MSR White rubber manifold sealing ring $1.40 SM-ST Glass Solar Tube $21.00 Page 13

ALL ORDERS MUST BE EMAILED OR FAXED IN ***Timely processing and accuracy are not guaranteed for phoned-in orders*** email: parts@naturescomfortllc.

14 ALL ORDERS MUST BE ED OR FAXED IN ***Timely processing and accuracy are not guaranteed for phoned-in orders*** - Fax: Be sure to include description for order accuracy Name: Phone: Send invoice for check or wire transfer Charge CC on file Call for CC payment Ship to: Ship to above address Hold for pickup on (date) Ship with other order on invoice # (Do not write CC info on order) Item Code - Description Price Qty Item Total Orders will be ready for pickup or shipped after full payment is received Notes: (Prices must be from the 6/4/2013 catalog) Grand Total $ Page 14

Nature s Comfort LLC., 0214 Marquis Street, Lagrange, IN Phone: Fall-Winter 2018 RETAIL PARTS CATALOG

Nature s Comfort LLC., 0214 Marquis Street, Lagrange, IN 46761 - Phone: 877-251-7740 www.naturescomfortllc.com Fall-Winter 2018 RETAIL PARTS CATALOG Prices are as of 10/01/2018 and are subject to change