Auto SPE-06Plus Solid Phase Extraction System. Reeko Instrument USA

Transcription

1 Auto SPE-06Plus Solid Phase Extraction System Reeko Instrument USA

2 Reeko Overview Reeko Instrument focuses on the automatic sampler preparation instruments, R&D and manufacture. The company design and manufacture the lab equipment for Automatic Solid Phase Extraction (SPE) and Automatic Homogenizer (AH-20) which focus in food safety and environmental application, as well as capillary electrophoresis (CE) & integrated ICP-MS interface for the special analysis. Reeko Instrument USA Product Summary AutoSPE-06Plus workstation is an automated solid-phase extraction system that is designed for the extraction and concentration of trace organic compounds in aqueous samples, e.g. drinking water, tap water and source water etc. The system can automatically complete the whole process of solid phase extraction (conditioning cartridges, sample loading, washing, drying, elution) concentration and automatic sensor endpoint.compare with vacuum manifold SPE, AutoSPE-06Plus saves time, solvent, labor ensuring high reproducibility and productivity for analytical laboratories and improves lab safety by minimizing the chance of hazardous samples and chemicals contact to the operator. 1

3 Main Features Fully automatic Condition Loading Rinse Dry Elution Concentration Volumetric Analysis AutoSPE-06Plus Series Automatically complete the above steps Drying methods of SPE column Nitrogen purge, vacuum pumping or both The combination of nitrogen purge and vacuum pumping provide outstanding efficiency for the drying. For example, drying a C18 with nitrogen purge and vacuum pumping save more than 40% time compare with traditional nitrogen blowing way, which not only highly increase the efficiency but also eliminate the risk of losing volatile samples, ensuring high recovery and Parallelism. Time comparison between the two methods Nitrogen purge + vacuum pumping Save 40% Nitrogen purge min Anhydrous sodium sulfate column to remove moisture online To some samples, anhydrous sodium sulfate column is more of an ideal method for drying, especially to those that drying with nitrogen blowing may decrease the recovery. With the installation of anhydrous sodium sulfate columns, the eluent can be dried by going through the column directly and collected to the graduated test tube 2

4 Both disk and cartridge configurations Auto SPE instrument is available in both disk and cartridge configurations to suit the needs of different applications. Sample capacity: 6 channels 6 channels simultaneously for condition, Loading, rinse, dry and elution. Option for serial columns operation Auto-flush function With the auto-flush function, the system is able to wash down the residue on the wall of the bottle after sample loading, preventing the weak polarity compounds from being adhered, which greatly improve the performance of extracting organochlorine and polyester compounds. With visual window Can timely monitor the status on collection or condensation. Built-in concentration module Independent nitrogen blow concentration and heat module. Separate collection of multiple components With two collection racks designed, more than one compound can be collected separately in a batch run, providing flexibility to handle complicate sample or method development. Environmentally-friendly operation Sealed in the collection chamber, the waste lines module Segregates aqueous waste, solvent and chlorinated solvent Conical bottom collection tube Round bottom collection tube Graduated collection tube Infrared sensor endpoint. Optical sensor endpoint detection The endpoint is detected automatically by IR sensors. into different waste tubing. An exhaust fan and a vent pipe are set up to exhaust the volatile solvent.the environmental protection design of AutoSPE-06Plus greatly reduce the chance to contact solvent,making the operation safe and reliable. 3 4

5 Application Auto SPE Series is the ideal solutions for the extraction of pesticides, antibiotics, PAHs, PCBs, semi-volatile organic compounds, microcrystal in aqueous samples. The system uses valveless pump to quantitatively take the samples, and syringe pump to condition and elute. In the case of unattended, Auto SPE Series can automate the whole SPE process for improved analytical precision and productivity. The typical applications: Pesticides, PAHs, veterinary drugs, SVOCs, PCBs, herbicides, dioxins, furans, and explosives reside, and flame retardants. The recovery study. The spiked PAHs in drinking water No. name Abbreviated Recovery(%) RSD(%,n=3) 1 Naphthalene Nap Acenaphthylene Acpy Acenaphthene Acp Fluorene Flu Phenanthrene PhA Anthracene AnT Fluoranthene FluA Is Pyrene -d10 d 10 -Pyr Pyrene Pyr Chrysene Chr Benzo(a)anthracene B(a)A Benzo(b)fluoranthene B(b)F Benzo(k)fluoranthene B(k)F Benzo(a)pyrene B(a)P Indeno(1,2,3 -cd)pyrene InP Dibenzo(a,h)anthracene D(b)A Benzo(g,hi)perylene B(ghi)P The typical applications US EPA525.2 US EPA8270 US EPA8141B Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column GC/Mass Spectrometry Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry Organophosphorus compounds by Gas Chromatography 5

6 AutoSPE-06PLUS Specification Automatically complete the whole process of solid phase extraction (conditioning, sample loading, Rinsing, drying, elution concentration with automatic endpoint detection). Simultaneously process 6 samples. Continuously loading sample with positive pressure Sample volume: 10mL - 20 liter. Flow rate: 0-100mL/min Ability to support up to seven reagents. Utilizes industry standard 1mL, 3 ml, 6mL, 12mL cartridge and 47mm, 50mm disk. Separate collection of multiple components: With two collection racks designed, more than one compound can be collected separately in a batch run Drying methods of SPE column Nitrogen purge, vacuum pumping or both. Segregates aqueous waste, solvent and chlorinated solvent using separate waste lines. Closed system to better protect operator from hazardous chemicals. Operation system software Graphical interface: Preview methods and apparatus of operating conditions in advance. Concentration function Nitrogen blowing: independent nitrogen gas path for nitrogen blowing Heating block: digital controlled hot block Exhaust fan: a vacuum fan to speed up the concentration Closed chamber: prevent the solvents from volatilization. Optical sensor endpoint detection 6

7 For more information or for any parts not listed please contact KRSS Tel: +44 (0) or KRSS recognise and acknowledge all trademarks. E&OE w w w. k r s s l t d. c o m KRSS Ltd. Unit 7 Christleton Court Manor Park Runcorn Cheshire WA7 1ST U.K.