E5CN/E5CN-U (48 x 48 mm)

Transcription

1 Basic-type Digital Temperature Controller /-U (48 x 48 mm) CSM -U_DS_E_3_ New 48 x 48-mm Basic Temperature Controller with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function. Indication Accuracy Thermocouple input: ±.3% of PV (previous models: ±.5%) Pt input: ±.% of PV (previous models: ±.5%) Analog input: ±.% FS (previous models: ±.5%) New -U s (Plug-in s) with analog inputs and current outputs. A PV/SV-status display function can be set to automatically alternate between displaying the status of the Temperature Controller (auto/manual, RUN/STOP, and alarms) and the PV or SV. Preventive maintenance for relays in the Temperature Controller using a Control Output / Counter mm mm -U Refer to Safety Precautions for E5@N/E5@N-H. Main I/O Functions Event Inputs None Two -level Display: PV and SV 4-digit Display Sensor Inputs Universal thermocouple/pt inputs (s with temperature inputs) Analog current/voltage inputs (s with analog inputs) Indication Accuracy Thermocouple input: ±.3% of PV Pt input: ±.% of PV Analog input: ±.% FS Sampling Period 5 ms Control Output None Voltage output (for driving SSR) Control Output ong-life relay output (hybrid) Auxiliary Outputs None One Two Auto/manual switching Temperature Controller status display Simple program function Control output / count alarm PV change rate alarm s also available with communications This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions and other information required for operation before attempting to use the product. /E5AN/E5EN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H6) /E5AN/E5EN Digital Temperature Controllers Manual Basic Type (Cat. No. H8)

2 ineup /-U control output or auxiliary outputs Temperature input control outputs auxiliary outputs Terminal block control output or auxiliary outputs Basic Type Analog input control outputs auxiliary outputs Plug-in Temperature input Analog input control output control output,, or auxiliary outputs,, or auxiliary outputs Note: s with one control output and one or two auxiliary outputs and models with two control outputs can be used for heating/cooling control. Number Structure Number egend Controllers -@@M@@-@ Control Output R: Q: C: Y: ong-life relay output (hybrid) *. Auxiliary Outputs * Blank: None : Two outputs 3. Option M: Option Unit can be mounted. 4. Input Type T: Universal thermocouple/platinum resistance thermometer : Analog current/voltage input 5. Power Supply Voltage Blank: to 4 VAC D: 4 VAC/VDC 6. Case Color Blank: Black W: Silver 7. Terminal Cover -5: With terminal cover Option Units E53-CN@@@ 3 4. Applicable Controller CN: or -H. Function Blank: None Q: Control output (voltage for driving SSR) P: Power supply for sensor 3. Function Blank: None H: Heater burnout/ssr failure/heater overcurrent detection (CT) HH: Heater burnout/ssr failure/heater overcurrent detection (CT) B: Two event inputs 3: communications H3: Heater burnout/ssr failure/heater overcurrent detection (CT) + communications HB: Heater burnout/ssr failure/heater overcurrent detection (CT) + Two event inputs HH3: Heater burnout/ssr failure/heater overcurrent detection (CT) + communications 4. Version N: Applicable only to models released after January 8 Note: Not all combinations of function and function specifications are possible for Option Units (E53-@@@@). *. Always connect an AC load to a long-life relay output. The output will not turn if a DC load is connected because a triac is used for switching the circuit. For details, check the conditions in Ratings. *. Auxiliary outputs are contact outputs that can be used to output alarms or results of logic operations.

3 /-U Ordering Information Controllers with Terminal Blocks Size /6 DIN (W H D) Case color Black Silver Power supply voltage to 4 VAC 4 VAC/VDC to 4 VAC 4 VAC/VDC to 4 VAC Input type Auxiliary outputs Control output Thermocouple or Resistance thermometer Thermocouple or Resistance thermometer Analog (current/voltage) Analog (current/voltage) Thermocouple or Resistance thermometer 4 VAC/VDC Note: s with analog inputs do not have temperature unit indicators. Option Units One of the following Option Units can be mounted to provide the with additional functions. None None None None ong-life relay output (hybrid) ong-life relay output (hybrid) ong-life relay output (hybrid) -RMT-5 -QMT-5 -CMT-5 -RMT-5 -QMT-5 -CMT-5 -YMT-5 -RMTD-5 -QMTD-5 -CMTD-5 -RMTD-5 -QMTD-5 -CMTD-5 -RM-5 -QM-5 -CM-5 -RM-5 -QM-5 -CM-5 -YM-5 -RMD-5 -QMD-5 -CMD-5 -RMT-W-5 -QMT-W-5 -CMT-W-5 -RMT-W-5 -QMT-W-5 -CMT-W-5 -YMT-W-5 -RMTD-W-5 -QMTD-W-5 -CMTD-W-5 3-phase heater burnout/ssr failure/ Heater overcurrent detection Heater burnout/ssr failure/heater overcurrent detection Heater burnout/ssr failure/heater overcurrent detection Heater burnout/ssr failure/heater overcurrent detection Heater burnout/ssr failure/heater overcurrent detection 3-phase heater burnout/ssr failure/ Heater overcurrent detection Functions Event inputs Event inputs Event inputs Control output (Voltage for driving SSR) Control output (Voltage for driving SSR) Control output (Voltage for driving SSR) Control output Event inputs (Voltage for driving SSR) Note: Option Units cannot be used for plug-in models. These Option Units are applicable only to models released after January 8. External power supply for ESB External power supply for ESB External power supply for ESB E53-CNHH3N E53-CNHBN E53-CNQ3N E53-CNPBN E53-CNPHN E53-CNP3N E53-CNH3N E53-CN3N E53-CNBN E53-CNQHN E53-CNQHHN E53-CNQBN 3

4 Number Structure Number egend (Plug-in-type Controllers) /-U 3 4. Output Type R: Q: C:. Number of Alarms Blank: No alarm : One alarm : Two alarms 3. Input Type T: Universal thermocouple/platinum resistance thermometer : Analog Input 4. Plug-in type U: Plug-in type Ordering Information Plug-in-type Controllers Size /6 DIN Black Case color Power supply voltage to 4 VAC 4 VAC/VDC Note: s with analog inputs do not have temperature unit indicators. Input type Auxiliary outputs Control output Thermocouple or resistance thermometer Analog (current/voltage) Thermocouple or resistance thermometer None None -RTU -QTU -CTU -RTU -QTU -CTU -RTU -QTU -CTU -RU -QU -CU -RU -QU -CU -RTDU -QTDU -CTDU -RTDU -QTDU -CTDU -RTDU -QTDU -CTDU 4

5 /-U Accessories (Order Separately) USB-Serial Conversion Cable Adapter Terminal Cover E58-CIFQ Connectable models Terminal block models Y9F-45 Note: Use this Adapter when the panel has been previously prepared for the Connectable models Terminal block models E53-COV7 Note: The Terminal Cover comes with the models. Waterproof Packing Y9S-9 Note: The Waterproof Packing is included with the Controller only for models with terminal blocks. Current Transformers (CTs) Hole diameter 5.8 dia. E54-CT. dia. E54-CT3 Sockets (for Plug-in s) Type Front-connecting Socket Front-connecting Socket with Finger Protection Back-connecting Socket Terminal Cover for Back-connecting socket with Finger Protection Front cover Hard Front Cover Soft Front Cover Type C-Thermo Support Software EST-C-MV4 PCF- PCF--E P3GA- Y9A-48G Y9A-48B Y9A-48D 5

6 Specifications Ratings Power supply voltage Operating voltage range Power consumption Sensor input Input impedance Control method Control outputs Auxiliary outputs -U Voltage output (for driving SSR) No D in model number: to 4 VAC, 5/6 Hz D in model number: 4 VAC, 5/6 Hz; 4 VDC 85% to % of rated supply voltage to 4 VAC: 7.5 VA (max.) (-RT at VAC: 3. VA) 4 VAC/VDC: 5 VA/3 W (max.) (-RTD at 4 VAC:.7 VA) to 4 VAC: 6 VA (max.) 4 VAC/VDC: 3 VA/ W (max.) (models with current output: 4 VA/ W) s with temperature inputs Thermocouple: K, J, T, E,, U, N, R, S, B, W, or P II Platinum resistance thermometer: Pt or JPt Infrared temperature sensor: to 7 C, 6 to C, 5 to 65 C, or 4 to 6 C Voltage input: to 5 mv s with analog inputs Current input: 4 to ma or to ma Voltage input: to 5 V, to 5 V, or to V /-U Current input: Ω max., Voltage input: MΩ min. (Use a : connection when connecting the ES-HB.) / control or -PID control (with auto-tuning) -U -U ST-NO, 5 VAC, 3 A (resistive load), electrical life:, operations, minimum applicable load: 5 V, ma DT, 5 VAC, 3 A (resistive load), electrical life:, operations, minimum applicable load: 5 V, ma Output voltage: VDC ±% (PNP), max. load current: ma, with short-circuit protection circuit 4 to ma DC/ to ma DC, load: 6 Ω max., resolution: approx., ong-life relay output Number of outputs Output specifications ST-NO, 5 VAC, 3 A (resistive load), electrical life:,, operations, load power supply voltage: 75 to 5 VAC (DC loads cannot be connected.), minimum applicable load: 5 V, ma, leakage current: 5 ma max. (5 VAC, 6 Hz) or max. (Depends on the model.) : ST-NO, 5 VAC, 3 A (resistive load), electrical life:, operations, minimum applicable load: 5 V, ma Number of inputs Event External contact Contact input: : kω max., : kω min. inputs input Non-contact input: : Residual voltage:.5 V max., : eakage current:. ma max. specifications Current flow: Approx. 7 ma per contact External power supply for ESB VDC ±%, ma, short-circuit protection circuit provided Setting method Indication method Multi Bank switching Other functions Digital setting using front panel keys -segment digital display and individual indicators (7-segment display also possible) Character height: PV: mm, SV: 6.5 mm Up to four set points ( to 3) can be saved and selected using event inputs, key operations, or serial communications. Not supported Manual output, heating/cooling control, loop burnout alarm, ramp, other alarm functions, heater burnout detection, 4% AT, % AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, control output / counter, extraction of square root, MV change rate limit, logic operations, PV/SV status display, simple program, automatic cooling coefficient adjustment Ambient operating temperature to 55 C (with no condensation or icing), for 3-year warranty: to 5 C Ambient operating humidity 5% to 85% Storage temperature 5 to 65 C (with no condensation or icing) 6

7 /-U Input Ranges Thermocouple/Platinum Resistance Thermometer (Universal Inputs) Temperature range ( C) Input Type Platinum resistance thermometer Shaded settings are the default settings. The applicable standards for the input types are as follows: K, J, T, E, N, R, S, B: JIS C 6-995, IEC 584- : Fe-CuNi, DIN U: Cu-CuNi, DIN W: W5Re/W6Re, ASTM E s with Analog Inputs Thermocouple Name Pt JPt K J T E U N R S B W P II Setting number Input Type Current Voltage Input specification 4 to ma to ma to 5 V to 5 V to V Usable in the following ranges by scaling: Setting range 999 to 9999, 99.9 to 999.9, 9.99 to or.999 to Setting number 3 4 Shaded settings are the default settings. 8 3 Infrared temperature sensor to 7 C 6 to C 5 to 65 C 4 to 6 C Analog input to 5 mv Usable in the following ranges by scaling: 999 to 9999 or 99.9 to JPt: JIS C , JIS C Pt: JIS C , IEC 75 P II: According to Platinel II electromotive force charts from BASF (previously Engelhard) 7

8 /-U Alarm Outputs Each alarm can be independently set to one of the following 3 alarm types. The default is : Upper limit. Auxiliary outputs are allocated for alarms. delays and delays ( to 999 s) can also be specified. Note: For models with heater burnout, SSR failure, and heater overcurrent detection, alarm will be an OR output of the alarm selected from the following alarm types and the alarms for heater burnout, SSR failure, and heater overcurrent. To output only a heater burnout alarm, SSR failure alarm, and heater overcurrent alarm for alarm, set the alarm type to (i.e., no alarm function). Set value * Alarm type Alarm function Upper- and lowerlimit Upper limit 3 ower limit 4 * 5 * Upper- and lowerlimit range Upper- and lowerlimit with standby sequence Upper-limit with standby sequence ower-limit with standby sequence Absolute-value upper-limit Absolute-value lower-limit Absolute-value upper-limit with standby sequence Absolute-value lower-limit with standby sequence BA (for alarm only) PV change rate alarm Alarm output operation When is positive Output * H H H * *3 *4 When is negative *. With set values, 4 and 5, the upper and lower limit values can be set independently for each alarm type, and are expressed as and H. *. Set value:, Upper- and lower-limit alarm Case H H <, > H < Case H H >, < H > *3. Set value: 4, Upper- and lower-limit range Case H H <, > H < Case H H >, < H > Case 3 (Always ) *4. Set value: 5, Upper- and lower-limit with standby sequence For Upper- and ower-imit Alarm Described Above Case and Always when the upper-limit and lower-limit hysteresis overlaps. Case 3: Always *5. Set value: 5, Upper- and lower-limit with standby sequence Always when the upper-limit and lower-limit hysteresis overlaps. H H H Case 3 (Always ) H H H H <, < H <, > H H >, < H H <, < H <, > H H >, < H 8

9 /-U Characteristics Indication accuracy Influence of temperature * Influence of voltage * Input sampling period Hysteresis Thermocouple: * Terminal block models (): (±.3% of indicated value or ± C, whichever is greater) ± digit max. Plug-in models (-U): (±% of indicated value or ± C, whichever is greater) ± digit max. Platinum resistance thermometer input: Terminal block models () and plug-in models (-U): (±.% of indicated value or ±.8 C, whichever is greater) ± digit max. Analog input: Terminal block models () and plug-in models (-U): ±.% FS ± digit max. CT input: Terminal block models (): ±5% FS ± digit max. Thermocouple input (R, S, B, W, P II): Terminal block models (): (±% of PV or ± C, whichever is greater) ± digit max. Plug-in models (-U): (±% of PV or ± C, whichever is greater) ± digit max. Other thermocouple input: *3 Terminal block models (): (±% of PV or ±4 C, whichever is greater) ± digit max. Plug-in models (-U): (±% of PV or ±4 C, whichever is greater) ± digit max. Platinum resistance thermometer input: Terminal block models () and plug-in models (-U): (±% of PV or ± C, whichever is greater) ± digit max. Analog input: Terminal block models () and plug-in models (-U): (±%FS) ± digit max. 5 ms s with thermocouple/platinum resistance thermometer input (universal input):. to EU (in units of. EU) *4 s with analog input:. to 99.99% FS (in units of.% FS) Proportional band (P) s with thermocouple/platinum resistance thermometer input (universal input):. to EU (in units of. EU) *4 s with analog input:. to 999.9% FS (in units of.% FS) Integral time (I) to 3999 s (in units of s) Derivative time (D) to 3999 s (in units of s) *5 Control period.5, to 99 s (in units of s) Manual reset value. to.% (in units of.%) Alarm setting range Affect of signal source resistance Insulation resistance Dielectric strength Vibration Malfunction resistance Destruction Shock Malfunction resistance Destruction Weight Degree of protection Memory protection Setup Tool Setup Tool port Standards -U -U Approved standards *7 Conformed standards 999 to 9999 (decimal point position depends on input type) Thermocouple:. C/Ω max. ( Ω max.) Platinum resistance thermometer:. C/Ω max. ( Ω max.) MΩ min. (at 5 VDC),3 VAC, 5 or 6 Hz for min (between terminals with different charge) to 55 Hz, m/s for min each in, Y, and Z directions to 55 Hz,.75-mm single amplitude for hrs each in, Y, and Z directions m/s, 3 times each in, Y, and Z directions 3 m/s, 3 times each in, Y, and Z directions Controller: Approx. g, Mounting Bracket: Approx. g Controller: Approx. g, Mounting Bracket: Approx. g Front panel: IP66, Rear case: IP, Terminals: IP Front panel: IP5, Rear case: IP, Terminals: IP Non-volatile memory (number of writes:,, times) C-Thermo version 4. or higher Provided on the bottom of the. Use this port to connect a computer to the when using the Setup Tool. An E58-CIFQ USB-Serial Conversion Cable is required to connect the computer to the. *6 U 6-, CSA C. No. - EN 6- (IEC 6-): Pollution level, overcurrent category II EMI: EN 636 Radiated Interference Electromagnetic Field Strength: EN 55 Group, class A Noise Terminal Voltage: EN 55 Group, class A EMS: EN 636 ESD Immunity: EN 6-4- EMC Electromagnetic Field Immunity: EN Burst Noise Immunity: EN Conducted Disturbance Immunity: EN Surge Immunity: EN Power Frequency Magnetic Field Immunity: EN Voltage Dip/Interrupting Immunity: EN 6-4- *. The indication accuracy of K thermocouples in the to 3 C range, T and N thermocouples at a temperature of C max., and U and thermocouples at any temperatures is ± C ± digit max. The indication accuracy of the B thermocouple at a temperature of 4 C max. is not specified. The indication accuracy of B thermocouples in the 4 to 8 C range is ±3 C max. The indication accuracy of the R and S thermocouples at a temperature of C max. is ±3 C ± digit max. The indication accuracy of W thermocouples is ±.3 of PV or ±3 C, whichever is greater, ± digit max. The indication accuracy of P II thermocouples is ±.3 of PV or ± C, whichever is greater, ± digit max. *. Ambient temperature: C to 3 C to 55 C, Voltage range: % to % of rated voltage *3. K thermocouple at C max.: ± max. *4. EU stands for Engineering Unit and is used as the unit after scaling. For a temperature sensor, the EU is C or F. *5. When robust tuning (RT) is, the differential time is. to (in units of. s). *6. External communications () and cable communications for the Setup Tool can be used at the same time. *7. The -U plug-in model is certified for U listing only when used together with the OMR PCF- or PCF--E Socket. The P3GA- is not certified for U listing. 9

10 /-U USB-Serial Conversion Cable Applicable OS Windows, P, or Vista Applicable software C-Thermo version 4. or higher Applicable models E5AN/E5EN//-U/E5AN-H/ E5EN-H/-H USB interface standard Conforms to USB Specification.. DTE speed 384 bps Connector specifications Power supply Power supply voltage Current consumption Ambient operating temperature Ambient operating humidity Computer: USB (type A plug) Temperature Controller: Setup Tool port (on bottom of Controller) Bus power (Supplied from USB host controller.) 5 VDC 7 ma to 55 C (with no condensation or icing) % to 8% Storage temperature to 6 C (with no condensation or icing) Storage humidity % to 8% Altitude, m max. Weight Approx. g Note: A driver must be installed in the personal computer. Refer to installation information in the operation manual for the Conversion Cable. Specifications Transmission line connection method : Multipoint (two-wire, half duplex) Synchronization method Start-stop synchronization Protocol CompoWay/F, SYSWAY, or Modbus Baud rate, 4, 48, 96, 9, 384, or 576 bps Transmission code ASCII Data bit length * 7 or 8 bits Stop bit length * or bits Vertical parity (none, even, odd) Error detection Frame check sequence (FCS) with SYSWAY Block check character (BCC) with CompoWay/F or CRC-6 Modbus Flow control None Interface Retry function None buffer 7 bytes response wait time to 99 ms Default: ms * The baud rate, data bit length, stop bit length, and vertical parity can be individually set using the Setting evel. Current Transformer (Order Separately) Ratings Dielectric strength, VAC for min Vibration resistance 5 Hz, 98 m/s Weight Accessories (E54-CT3 only) E54-CT: Approx..5 g, E54-CT3: Approx. 5 g Armatures () Plugs () Heater Burnout Alarms, SSR Failure Alarms, and Heater Overcurrent Alarms CT input (for heater current detection) Maximum heater current Input current indication accuracy Heater burnout alarm setting range * SSR failure alarm setting range * Heater overcurrent alarm setting range *3 s with detection for single-phase heaters: One input s with detection for single-phase or three-phase heaters: Two inputs 5 A AC ±5% FS ± digit max.. to 49.9 A (in units of. A) Minimum detection time: ms. to 49.9 A (in units of. A) Minimum detection time: ms. to 49.9 A (in units of. A) Minimum detection time: ms *. For heater burnout alarms, the heater current will be measured when the control output is, and the output assigned to the alarm function will turn if the heater current is lower than the set value (i.e., heater burnout detection current value). *. For SSR failure alarms, the heater current will be measured when the control output is, and the output assigned to the alarm function will turn if the heater current is higher than the set value (i.e., SSR failure detection current value). *3. For heater overcurrent alarms, the heater current will be measured when the control output is, and the output assigned to the alarm function will turn if the heater current is higher than the set value (i.e., heater overcurrent detection current value). Electrical ife Expectancy Curve for Relays (Reference Values) ife ( 4 operations) VAC, 3 VDC (resistive load) cosφ = Switching current (A) Note: Do not connect a DC load to a Controller with a ong-life Relay Output.

11 External Connections /-U A voltage output (control output, for driving SSR) is not electrically insulated from the internal circuits. When using a grounding thermocouple, do not connect any of the control output terminals to ground. (If the control output terminals are connected to ground, errors will occur in the measured temperature values as a result of leakage current.) Consult with your OMR representative before using the external power supply for the ESB for any other purpose. Controllers Control output ong-life relay output 5 VAC, 3 A (resistive load) 5 VAC, 3 A (resistive load) VDC, ma to ma DC 4 to ma DC oad: 6 Ω max. The E5@N-@@@T@ is set for a K-type thermocouple (input type = 5) by default. An input error (s.err) will occur if the input type setting does not agree with the temperature sensor. Check the input type. Auxiliary outputs (relay outputs) 5 VAC, 3 A (resistive load) Auxiliary outputs (relay outputs) Control output VDC, ma ma V Analog input Control output A B B TC/Pt universal input Auxiliary output Auxiliary output Input power supply to 4 VAC 4 VAC/VDC (no polarity) A heater burnout alarm, heater short alarm, heater overcurrent alarm, or input alarm is sent to the output to which the alarm function is assigned. Option Units E53-CNHH3N () and CT B(+) A( ) 3 CT CT 4 EV CT E53-CNHBN Event inputs and CT EV 3 4 E53-CNQ3N () and Control Output B(+) A( ) Control output E53-CNPBN Event Inputs and External Power Supply EV 3 EV + External 4 VDC, power supply ma E53-CNPHN External Power Supply and CT External + power supply CT VDC, ma 3 4 E53-CNP3N () and External Power Supply B(+) A( ) 3 + External 4 VDC, power supply ma E53-CNH3N () and CT E53-CN3N () E53-CNBN Event inputs E53-CNQHN Control Output and CT E53-CNQHHN Control Output and CT E53-CNQBN Event Inputs and Control Output B(+) A( ) 3 4 CT B(+) A( ) 3 4 EV EV Control output 3 4 CT + Control output CT CT 3 4 EV 3 EV + 4 Control output -U Control output (three terminals used) DT, 5 VAC, 3 A (resistive load) Voltage output (for driving SSR) VDC, ma 4 to ma DC to ma DC oad: 6 W max. The E5@N-@@@T@ is set for a K-type thermocouple (input type = 5) by default. An input error (s.err) will occur if the input type setting does not agree with the temperature sensor. Check the input type. m A Analog input Control output Note: For the Wiring Socket, purchase the PCF- or PG3A- separately. V A B B TC/Pt universal input Auxiliary output 5 VAC, 3 A (resistive load) (s) Auxiliary output Auxiliary output (Control output (cooling side)) Input power supply to 4 VAC 4 VAC/VDC (no polarity) An input error is sent to the output to which the alarm function is assigned.

12 Nomenclature /-U -U The front panel is the same for the and -U. Temperature unit Operation indicators No. display No. display evel Key Up Key Mode Key Down Key Dimensions (Unit: mm) Terminal s Panel Cutout Mounted Separately Group Mounted (48 number of units.5) min. Group mounting does not allow waterproofing. Waterproof Mounting Adapter Packing (Accessory) (Accessory) Terminal Cover (E53-COV7) (Accessory) Note: The terminal block cannot be removed Recommended panel thickness is to 5 mm. Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers.) To mount the Controller so that it is waterproof, insert the waterproof packing onto the Controller. When two or more Controllers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications. -U Plug-in s (84.7) Panel Cutout Mounted Separately Group Mounted (48 number of units.5) Mounting Adapter (Accessory) 6 min Recommended panel thickness is to 5 mm. Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers.) When two or more Controllers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications. Accessories (Order Separately) USB-Serial Conversion Cable E58-CIFQ (,) 5 ED indicator (SD),765 USB connector (type A plug) ED indicator (RD) Serial connector

13 /-U Terminal Cover E53-COV7 Waterproof Packing Y9S-9 (for DIN 48 48) Note: The E53-COV cannot be used. Order the Waterproof Packing separately if it becomes lost or damaged. The Waterproof Packing can be used to achieve an IP66 degree of protection. (Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in IP66. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. Consider one year a rough standard. OMR shall not be liable for the level of water resistance if the customer does not perform periodic replacement.) The Waterproof Packing does not need to be attached if a waterproof structure is not required. 9. Current Transformers E54-CT dia..5 Two, 3.5 dia E54-CT Thru-current (Io) vs. Output Voltage (Eo) (Reference Values) Maximum continuous heater current: 5 A (5/6 Hz) Number of windings: 4± Winding resistance: 8± Ω Output voltage (Eo) V (r.m.s.) V 5 Hz mv kω Ω Distortion factor % 3% % E54-CT dia. R = Ω dia. 9 µv E54-CT3 Accessory Armature Approx. 3 dia. Plug Two, M3 (depth: 4) 3 Connection Example Armature Plug ead ma, A Thru-current (Io) A (r.m.s.) E54-CT3 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values) Maximum continuous heater current: A (5/6 Hz) (Maximum continuous heater current for the Temperature Controller is 5 A.) Number of windings: 4± Winding resistance: 8±.8 Ω Output voltage (Eo) V (r.m.s.) V 5 Hz mv kω 5 Ω Ω 5 Ω R = Ω Distortion factor % 3% % Approx. 6 dia. () µv ma, A Thru-current (Io) A (r.m.s.) 3

14 /-U Adapter Y9F-45 Note:. Note:. Use this Adapter when the panel has already been prepared for the The Adapter is available only in black to Fixture (Accessory) Mounted to 7 7 Panel ( to 8 mm) (to back of ) -U Wiring Socket Front-connecting Socket PCF- Eleven, M sems screws Terminal ayout/internal Connections (Top View) 7 max Mounting Holes Two, 4.5 dia. mounting holes Two, 4.5-dia. holes 9 3 4±. Note: Can also be mounted to a DIN track. 4 5 max. 3. max. Note: A model with finger protection (PCF--E) is also available. Back-connecting Socket P3GA- 7 dia Terminal ayout/internal Connections (Bottom View) Note:. Using any other sockets will adversely affect accuracy. Use only the specified sockets.. A Protective Cover for finger protection (Y9A-48G) is also available. 4

15 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMR representative if you have any questions or comments. Warranty and imitations of iability WARRANTY OMR's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMR. OMR MAKES NO WARRANTY OR REPRESENTATI, EPRESS OR IMPIED, REGARDING N-INFRINGEMENT, MERCHANTABIITY, OR FITNESS FOR PARTICUAR PURPOSE OF THE PRODUCTS. ANY BUYER OR R ACKNOWEDGES THAT THE BUYER OR R AE HAS DETERMINED THAT THE PRODUCTS WI SUITABY MEET THE REQUIREMENTS OF THEIR INTENDED. OMR DISCAIMS A OTHER WARRANTIES, EPRESS OR IMPIED. IMITATIS OF IABIITY OMR SHA NOT BE RESIBE FOR ECIA, INDIRECT, OR CSEQUENTIA DAMAGES, OSS OF PROFITS OR COMMERCIA OSS IN ANY WAY CNECTED WITH THE PRODUCTS, WHETHER SUCH CAIM IS BASED CTRACT, WARRANTY, NEGIGENCE, OR STRICT IABIITY. In no event shall the responsibility of OMR for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHA OMR BE RESIBE FOR WARRANTY, REPAIR, OR OTHER CAIMS REGARDING THE PRODUCTS UNESS OMR'S ANAYSIS CFIRMS THAT THE PRODUCTS WERE PROPERY HANDED, STORED, INSTAED, AND MAINTAINED AND NOT SUBJECT TO CTAMINATI, AB, MIS, OR INAPPROPRIATE MODIFICATI OR REPAIR. Application Considerations SUITABIITY FOR OMR shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMR will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER THE PRODUCTS FOR AN APPICATI INVOVING SERIOUS RISK TO IFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMR PRODUCTS ARE PROPERY RATED AND INSTAED FOR THE INTENDED WITHIN THE OVERA EQUIPMENT OR SYSTEM. PROGRAMMABE PRODUCTS OMR shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN ECIFICATIS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMR representative at any time to confirm actual specifications of purchased products. DIMENSIS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMR s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMR Warranty and imitations of iability. ERRORS AND OMISSIS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. OMR Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMR Corporation 9 All Right Reserved.