(Notices) EUROPEAN COMMISSION
|
|
- Nathaniel Brooks
- 5 years ago
- Views:
Transcription
1 Official Journal of the European Union C 167/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Text with EEA relevance) (Publication of titles and references of harmonised s under the directive) (2010/C 167/01) Reference and title of the harmonised as a harmonised European EN 1:1998 Flued oil stoves with vaporizing burners EN 1:1998/A1:2007 Note EN 40-4:2005 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns EN 40-4:2005/AC: EN 40-5:2002 Lighting columns - Part 5: Requirements for steel lighting columns EN 40-6:2002 Lighting columns - Part 6: Requirements for aluminium lighting columns EN 40-7:2002 Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns EN 54-2:1997 Fire detection and fire alarm systems - Part 2: Control and indicating equipment EN 54-2:1997/A1:2006 Note EN 54-2:1997/AC: EN 54-3:2001 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders EN 54-3:2001/A1:2002 Note EN 54-3:2001/A2:2006 Note
2 C 167/2 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 54-4:1997 Fire detection and fire alarm systems - Part 4: Power supply equipment EN 54-4:1997/A1:2002 Note EN 54-4:1997/A2:2006 Note EN 54-4:1997/AC: EN 54-5:2000 Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors EN 54-5:2000/A1:2002 Note EN 54-7:2000 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization EN 54-7:2000/A1:2002 Note EN 54-7:2000/A2:2006 Note EN 54-10:2002 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors EN 54-10:2002/A1:2005 Note EN 54-11:2001 Fire detection and fire alarm systems - Part 11: Manual call points EN 54-11:2001/A1:2005 Note EN 54-12:2002 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam EN 54-16:2008 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment EN 54-17:2005 Fire detection and fire alarm systems - Part 17: Short-circuit isolators EN 54-17:2005/AC: EN 54-18:2005 Fire detection and fire alarm systems - Part 18: Input/output devices EN 54-18:2005/AC: EN 54-20:2006 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors EN 54-20:2006/AC:
3 Official Journal of the European Union C 167/3 Reference and title of the harmonised as a harmonised European EN 54-21:2006 Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment EN 54-23:2010 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices EN 54-24:2008 Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers EN 54-25:2008 Fire detection and fire alarm systems - Part 25: Components using radio links EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods EN 179: EN 197-1:2000 Cement - Part 1: Composition, specifications and conformity criteria for common cements EN 197-1:2000/A1:2004 Note EN 197-1:2000/A3:2007 Note EN 197-4:2004 Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements EN :2005 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements EN 413-1:2004 Masonry cement - Part 1: Composition, specifications and conformity criteria EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for nondomestic use - Part 1: Safety EN 438-7:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes EN 442-1:1995 Radiators and convectors - Part 1: Technical specifications and requirements EN 442-1:1995/A1:2003 Note EN 450-1:2005+A1:2007 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria EN 450-1:
4 C 167/4 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 459-1:2001 Building lime - Part 1: Definitions, specifications and conformity criteria EN 459-1:2001/AC: EN 490:2004 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications EN 490:2004/A1:2006 Note EN 492:2004 Fibre-cement slates and fittings - Product specification and test methods EN 492:2004/A1:2005 Note EN 492:2004/A2:2006 Note EN 494:2004+A3:2007 Fibre-cement profiled sheets and fittings - Product specification and test methods EN 494: EN 516:2006 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps EN 517:2006 Prefabricated accessories for roofing - Roof safety hooks EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods EN 520: EN 523:2003 Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control EN 534:2006+A1:2010 Corrugated bitumen sheets - Product specification and test methods EN 534: EN 544:2005 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/product EN 588-2:2001 Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers
5 Official Journal of the European Union C 167/5 Reference and title of the harmonised as a harmonised European EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods EN 598: EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kw, without a fan to assist transportation of combustion air and/or combustion products EN 671-1:2001 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose EN 671-1:2001/AC: EN 671-2:2001 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose EN 671-2:2001/A1:2004 Note EN 681-1:1996 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber EN 681-1:1996/A1:1998 Note EN 681-1:1996/A2:2002 Note EN 681-1:1996/A3:2005 Note EN 681-2:2000 Elastomeric Seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers EN 681-2:2000/A1:2002 Note EN 681-2:2000/A2:2005 Note EN 681-3:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber EN 681-3:2000/A1:2002 Note EN 681-4:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements EN 681-4:2000/A1:2002 Note EN 682:2002 Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
6 C 167/6 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 771-1:2003 Specification for masonry units - Part 1: Clay masonry units EN 771-1:2003/A1:2005 Note EN 771-2:2003 Specification for masonry units - Part 2: Calcium silicate masonry units EN 771-2: EN 771-2:2003/A1:2005 Note EN 771-3:2003 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) EN 771-3:2003/A1:2005 Note EN 771-4:2003 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units EN 771-4:2003/A1:2005 Note EN 771-5:2003 Specification for masonry units - Part 5: Manufactured stone masonry units EN 771-5:2003/A1:2005 Note EN 771-6:2005 Specification for masonry units - Part 6: Natural stone masonry units EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kw, without a fan to assist transportation of combustion air and/or combustion products EN 845-1:2003+A1:2008 Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets EN 845-1:
7 Official Journal of the European Union C 167/7 Reference and title of the harmonised as a harmonised European EN 845-2:2003 Specification for ancillary components for masonry - Part 2: Lintels EN 845-3:2003+A1:2008 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork EN 845-3: EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control EN 858-1:2002/A1:2004 Note 3 EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance EN 877:1999/A1:2006 Note EN 877:1999/A1:2006/AC: EN 934-2:2009 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling EN 934-2: EN 934-3:2009 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling EN 934-3: EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling EN 934-4: EN 934-5:2007 Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods EN 997:2003 WC pans and WC suites with integral trap EN 997:2003/A1:2006 Note EN 998-1:2003 Specification for mortar for masonry - Part 1: Rendering and plastering mortar EN 998-1:2003/AC:
8 C 167/8 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 998-2:2003 Specification for mortar for masonry - Part 2: Masonry mortar EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kw incorporating a fan to assist transportation of combustion air or combustion products EN :2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product EN :2007 Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/product EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications EN 1057: EN :2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/product EN :1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control EN :1999/A1:2004 Note EN :1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control EN :1999/A1:2004 Note EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods EN 1125: EN 1154:1996 Building hardware - Controlled door closing devices - Requirements and test methods EN 1154:1996/A1:2002 Note EN 1154:1996/A1:2002/AC:
9 Official Journal of the European Union C 167/9 Reference and title of the harmonised as a harmonised European EN 1155:1997 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods EN 1155:1997/A1:2002 Note EN 1155:1997/A1:2002/AC: EN 1158:1997 Building hardware - Door coordinator devices - Requirements and test methods EN 1158:1997/A1:2002 Note EN 1158:1997/A1:2002/AC: EN 1168:2005+A2:2009 Precast concrete products - Hollow core slabs EN 1168:2005+A1: EN :2005+A1:2008 Glass in building - Insulating glass units - Part 5: Evaluation of conformity EN : EN 1304:2005 Clay roofing tiles and fittings - Product definitions and specifications EN :2007+A1:2008 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems EN : EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kw EN :2005 Structural bearings - Part 3: Elastomeric bearings EN :2004 Structural bearings - Part 4: Roller bearings EN :2004/AC: EN :2005 Structural bearings - Part 5: Pot bearings EN :2004 Structural bearings - Part 6: Rocker bearings EN :2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings EN : EN :2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
10 C 167/10 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 1338:2003 Concrete paving blocks - Requirements and test methods EN 1338:2003/AC: EN 1339:2003 Concrete paving flags - Requirements and test methods EN 1339:2003/AC: EN 1340:2003 Concrete kerb units - Requirements and test methods EN 1340:2003/AC: EN 1341:2001 Slabs of natural stone for external paving - Requirements and test methods EN 1342:2001 Setts of natural stone for external paving - Requirements and test methods EN 1343:2001 Kerbs of natural stone for external paving - Requirements and test methods EN 1344:2002 Clay pavers - Requirements and test methods EN 1423:1997 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two EN 1423:1997/A1:2003 Note EN 1433:2002 Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity EN 1433:2002/A1:2005 Note EN 1457:1999 Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods EN 1457:1999/A1:2002 Note EN 1457:1999/AC: EN 1457:1999/A1:2002/AC: EN :2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements EN :
11 Official Journal of the European Union C 167/11 Reference and title of the harmonised as a harmonised European EN 1469:2004 Natural stone products - Slabs for cladding - Requirements EN :2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete EN :2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair EN :2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding EN :2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection EN :2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar EN :2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection EN 1520:2002 Prefabricated reinforced components of lightweight aggregate concrete with open structure EN 1520:2002/AC: EN :2004 Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/product EN :2004 Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/product EN 1806:2006 Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
12 C 167/12 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN :2004 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control EN :2004/AC: EN :2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products EN : EN :2009 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes EN : EN 1857:2003+A1:2008 Chimneys - Components - Concrete flue liners EN 1857: EN 1858:2008 Chimneys - Components - Concrete flue blocks EN 1858: EN :2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/product EN 1873:2005 Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced EN 1916:2002/AC: EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced EN 1917:2002/AC: EN 1935:2002 Building hardware - Single-axis hinges - Requirements and test methods EN 1935:2002/AC: EN :2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions EN :2009 Stainless steels - Part 4: Technical delivery conditions for sheet/ plate and strip of corrosion resisting steels for construction purposes EN :2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
13 Official Journal of the European Union C 167/13 Reference and title of the harmonised as a harmonised European EN :2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions EN :2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions EN 10224:2002/A1:2005 Note EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions EN 10311:2005 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions EN 10312:2002/A1:2005 Note EN 10340:2007 Steel castings for structural uses EN 10340:2007/AC: EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions EN 12004:2007 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation EN 12004: EN :2001 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter EN :2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater EN :2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
14 C 167/14 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN :2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter EN 12057:2004 Natural stone products - Modular tiles - Requirements EN 12058:2004 Natural stone products - Slabs for floors and stairs - Requirements EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices EN :2004 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators EN :2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators EN : EN :2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices EN : EN :2000 Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO 2 systems EN :2000/A1:2005 Note EN :2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
15 Official Journal of the European Union C 167/15 Reference and title of the harmonised as a harmonised European EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices EN :2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices EN :2001 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves EN :2001/AC: EN :2005 Smoke and heat control systems - Part 1: Specification for smoke barriers EN :2005/A1:2006 Note EN :2003 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators EN :2002 Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators EN :2002/AC: EN :2005 Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits EN :2005/AC: EN :2005 Smoke and heat control systems - Part 10: Power supplies EN :2005/AC: EN :2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/product
16 C 167/16 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 12209:2003 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods EN 12209:2003/AC: EN : A1:2001 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers EN : A1:2001/A2:2004 Note EN : A1:2001/A3:2006 Note EN :1999 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies EN :1999/A1:2001 Note EN :1999/A2:2005 Note EN :1999/AC: EN :2000 Fixed firefighting systems - Components for automatic sprinkler and water spray systems - Part 3: Dry alarm valve assemblies EN :2000/A1:2001 Note EN :2000/A2:2005 Note EN :2000 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms EN :2000/A1:2001 Note EN :2002 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors EN 12271:2006 Surface dressing - Requirements EN 12273:2008 Slurry surfacing - Requirements EN :2005 Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
17 Official Journal of the European Union C 167/17 Reference and title of the harmonised as a harmonised European EN :2004 Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification EN :2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/product EN 12352:2006 Traffic control equipment - Warning and safety light devices EN 12368:2006 Traffic control equipment - Signal heads EN 12380:2002 Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity EN 12446:2003 Chimneys - Components - Concrete outer wall elements EN 12467:2004 Fibre-cement flat sheets - Product specification and test methods EN 12467:2004/A1:2005 Note EN 12467:2004/A2:2006 Note EN :2000 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks EN :2000/A1:2003 Note EN :2005+A1:2009 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants EN : EN :2007 Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens EN 12620:2002+A1:2008 Aggregates for concrete EN 12620: EN :2000 Anti-glare systems for roads - Part 1: Performance and characteristics EN :2000/A1:2003 Note
18 C 167/18 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 12737:2004+A1:2007 Precast concrete products - Floor slats for livestock EN 12764:2004+A1:2008 Sanitary appliances - Specification for whirlpool baths EN 12764: EN 12794:2005+A1:2007 Precast concrete products - Foundation piles EN 12794: EN 12794:2005+A1:2007/AC: EN 12809:2001 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kw - Requirements and test methods EN 12809:2001/A1:2004 Note EN 12809:2001/AC: EN 12809:2001/A1:2004/AC: EN 12815:2001 Residential cookers fired by solid fuel - Requirements and test methods EN 12815:2001/A1:2004 Note EN 12815:2001/AC: EN 12815:2001/A1:2004/AC: EN 12839:2001 Precast concrete products - Elements for fences EN 12843:2004 Precast concrete products - Masts and poles EN 12859:2008 Gypsum blocks - Definitions, requirements and test methods EN 12859: EN 12860:2001 Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods EN 12860:2001/AC: EN 12878:2005 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test EN 12878:2005/AC: EN :2007 Fixed, vertical road traffic signs - Part 1: Fixed signs
19 Official Journal of the European Union C 167/19 Reference and title of the harmonised as a harmonised European EN :2007 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) EN :2007 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors EN 12951:2004 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods EN :2005+A1:2009 Road vertical signs - Variable message traffic signs - Part 1: Product EN : EN :2004 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/product EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas EN 13043:2002/AC: EN :2002 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout EN :2002/AC: EN :2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications EN :2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance EN : EN :2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions EN : EN :2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys EN 13069:2005 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
20 C 167/20 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN :2005 Free-standing chimneys - Part 5: Material for brick liners - Product specifications EN :2005/AC: EN :2005 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners EN :2005/AC: EN 13101:2002 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity EN :2006 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete EN :2006/AC: EN :2006 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers EN :2006/AC: EN :2006 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt EN :2006/AC: EN :2006 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt EN :2006/AC: EN :2006 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt EN :2006/AC: EN :2006 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt EN :2006/AC:
21 Official Journal of the European Union C 167/21 Reference and title of the harmonised as a harmonised European EN :2006 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt EN :2006/AC: EN 13139:2002 Aggregates for mortar EN 13139:2002/AC: EN :2003 Leak detection systems - Part 1: General principles EN 13162:2008 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification EN 13162: EN 13163:2008 Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification EN 13163: EN 13164:2008 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification EN 13164: EN 13165:2008 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification EN 13165: EN 13166:2008 Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification EN 13166: EN 13167:2008 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification EN 13167: EN 13168:2008 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification EN 13168: EN 13169:2008 Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification EN 13169: EN 13170:2008 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification EN 13170: EN 13171:2008 Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification EN 13171: EN 13224:2004+A1:2007 Precast concrete products - Ribbed floor elements EN 13224:
22 C 167/22 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN 13225:2004 Precast concrete products - Linear structural elements EN 13225:2004/AC: EN 13229:2001 Inset appliances including open fires fired by solid fuels - Requirements and test methods EN 13229:2001/A1:2003 Note EN 13229:2001/A2:2004 Note EN 13229:2001/AC: EN 13229:2001/A2:2004/AC: EN 13240:2001 Room heaters fired by solid fuel - Requirements and test methods EN 13240:2001/A2:2004 Note EN 13240:2001/AC: EN 13240:2001/A2:2004/AC: EN :2003 Industrial, commercial and garage doors and gates - Product - Part 1: Products without fire resistance or smoke control characteristics EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction EN 13242: EN :2008 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes EN :2008/AC: EN 13249:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) EN 13249:2000/A1:2005 Note
23 Official Journal of the European Union C 167/23 Reference and title of the harmonised as a harmonised European EN 13250:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways EN 13250:2000/A1:2005 Note EN 13251:2000 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures EN 13251:2000/A1:2005 Note EN 13252:2000 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems EN 13252:2000/A1:2005 Note EN 13253:2000 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) EN 13253:2000/A1:2005 Note EN 13254:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams EN 13254:2000/A1:2005 Note EN 13254:2000/AC: EN 13255:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals EN 13255:2000/A1:2005 Note EN 13255:2000/AC: EN 13256:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures EN 13256:2000/A1:2005 Note EN 13256:2000/AC: EN 13257:2000 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals EN 13257:2000/A1:2005 Note EN 13257:2000/AC:
24 C 167/24 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN :2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria EN : EN 13265:2000 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects EN 13265:2000/A1:2005 Note EN 13265:2000/AC: EN :2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements EN : EN 13310:2003 Kitchen sinks - Functional requirements and test methods EN 13341:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods EN 13361:2004 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams EN 13361:2004/A1:2006 Note EN 13362:2005 Geosynthetic Barriers - Characteristics required for use in the construction of canals EN :2002 Armourstone - Part 1: Specification EN :2002/AC: EN 13407:2006 Wall-hung urinals - Functional requirements and test methods EN 13450:2002 Aggregates for railway ballast EN 13450:2002/AC: EN :2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements EN 13479:2004 Welding consumables - General product for filler metals and fluxes for fusion welding of metallic materials
25 Official Journal of the European Union C 167/25 Reference and title of the harmonised as a harmonised European EN 13491:2004 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures EN 13491:2004/A1:2006 Note EN 13492:2004 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment EN 13492:2004/A1:2006 Note EN 13493:2005 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites EN 13502:2002 Chimneys - Requirements and test methods for clay/ceramic flue terminals EN 13561:2004+A1:2008 External blinds - Performance requirements including safety EN 13561: EN :2002 Anti-flooding devices for buildings - Part 1: Requirements EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels EN 13616:2004/AC: EN :2005 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering EN :2005 Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering EN 13659:2004+A1:2008 Shutters - Performance requirements including safety EN 13659: EN 13693:2004+A1:2009 Precast concrete products - Special roof elements EN 13693: EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics EN 13707: EN 13747:2005+A2:2010 Precast concrete products - Floor plates for floor systems EN 13747:2005+A1:
26 C 167/26 Official Journal of the European Union Reference and title of the harmonised as a harmonised European EN :2004 Terrazzo tiles - Part 1: Terrazzo tiles for internal use EN :2004/A1:2005 Note EN :2004/AC: EN :2004 Terrazzo tiles - Part 2: Terrazzo tiles for external use EN 13808:2005 Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements EN 13815:2006 Fibrous gypsum plaster casts - Definitions, requirements and test methods EN 13830:2003 Curtain walling - Product EN :2005+A1:2008 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing EN : EN :2004+A1:2008 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls EN : EN :2004 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods EN 13924:2006 Bitumen and bituminous binders - Specifications for hard paving grade bitumens EN 13924:2006/AC: EN 13950:2005 Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods EN 13956:2005 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics EN 13956:2005/AC:
27 Official Journal of the European Union C 167/27 Reference and title of the harmonised as a harmonised European EN 13963:2005 Jointing materials for gypsum plasterboards - Definitions, requirements and test methods EN 13963:2005/AC: EN 13964:2004 Suspended ceilings - Requirements and test methods EN 13964:2004/A1:2006 Note EN 13967:2004 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics EN 13967:2004/A1:2006 Note EN 13969:2004 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics EN 13969:2004/A1:2006 Note EN 13970:2004 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics EN 13970:2004/A1:2006 Note EN :2005 Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions EN 13984:2004 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics EN 13984:2004/A1:2006 Note EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking EN 13986: EN :2004 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements EN :2003 Ceiling mounted radiant panels supplied with water at temperature below 120 C - Part 1: Technical specifications and requirements
(Text with EEA relevance) (2013/C 186/02) (1) (2) (3) (4) (5) EN 1:1998/A1:2007 Note EN 40-4:2005/AC:
C 186/24 Official Journal of the European Union 28.6.2013 Commission communication in the framework of the implementation of Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws,
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 209/03)
C 209/14 EN Official Journal of the European Union 10.6.2016 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation)
9.3.2018 EN Official Journal of the European Union C 92/139 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 267/04)
C 267/16 EN Official Journal of the European Union 11.8.2017 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation)
C 54/80 EN Official Journal of the European Union 13.2.2015 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 076/05)
C 76/32 EN Official Journal of the European Union 10.3.2017 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council
More information(Information) COMMISSION. (Text with EEA relevance)
14.12.2005 EN Official Journal of the Union C 319/1 I (Information) COMMISSION Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on
More informationSnapshot of the current situation for standards to be cited in the OJ under the CPD
Snapshot of the current situation for standards to be cited in the OJ under the CPD Summary: Concerned Standards: 490 * Approved ENs Available Standards cited in the OJ: 120 ** Available Standards not
More informationNOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
Official Journal of the European Union C 378 English edition Information and Notices Volume 58 13 November 2015 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity certification Rossmore Business Park Ellesmere Port South Wirral Cheshire CH65 3EN Contact:
More informationSchedule of Accreditation
Schedule of Accreditation Organisation Name Trading As INAB Reg No 6023 Contact Name Address BRE Global Assurance (Ireland) Ltd David Gall Contact Phone No +353 1 882 4344 Email Website Accreditation Standard
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office John M. Keynesplein 9 1066 EP Amsterdam The Netherlands Location Certification Scheme John M. Keynesplein 9 1066 EP Amsterdam
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17819-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.08.2014 to 10.08.2019 Holder of certificate: MPA
More informationCONFORMITY ASSESSMENT SERVICES IN SCOPE OF CE MARKING. Full quality assurance Module H (95/16/EC Annex-IX)
CONFORMITY ASSESSMENT SERVICES IN SCOPE OF CE MARKING A. SCOPE UNDER LIFT DIRECTIVE (95/16/EC) Full quality assurance Module H (95/16/EC Annex-IX) Production quality assurance Module D (95/16/EC Annex-XIV)
More informationTECHNICAL AND USER REQUIREMENTS FOR PERSONAL ALERT SAFETY SYSTEMS
Centrum Naukowo Badawcze Ochrony PrzeciwpoŜarowej (Scientific and Research Centre for Fire Protection) Nadwiślańska 213, 05-420 Józefów, Poland Telephone (+48) 22 789 11 11 Fax.: (+48) 22 769 33 45 e-mail:
More informationExamination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them
Ref. Ares(2018)234778-15/01/2018 MetSta Hanna Järvenpää Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them 12.10.2017 Executive
More informationAckrediteringens omfattning RISE Research Institutes of Sweden AB i Borås, Karlskrona ackr 1002, NB 0402
Detta beslut omfattar de uppgifter som det anmälda organet är utsett att göra i respektive ZA-bilaga i de harmoniserade standarderna och tekniska specifikationerna i tabell 2 samt enligt standarder för
More informationTECHNICAL AND USER REQUIREMENTS FOR FIRE-FIGHTING PRESSURE HOSES FOR FIRE-FIGHTING PUMPS
Centrum Naukowo Badawcze Ochrony PrzeciwpoŜarowej (Scientific and Research Centre for Fire Protection) Nadwiślańska 213, 05-420 Józefów, Poland Telephone (+48) 22 789 11 11 Fax.: (+48) 22 769 33 45 e-mail:
More informationDOCUMENT TABLE OF CONTENTS
DOCUMENT 00003 June 16, 2005 TABLE OF CONTENTS DOCUMENT NO. INTRODUCTORY INFORMATION DOCUMENT 00003 TABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS SECTION 01011 SECTION 01025 SSP21.1-1 SECTION 01026
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exova (UK) Limited trading as Warrington Certification Issue No: 033 Issue date: 06 November 2017 to provide product conformity Holmesfield
More informationAPPENDIX F PUBLICATIONS REFERRED TO IN THE SPECIFICATION
APPENDIX F PUBLICATIONS REFERRED TO IN THE SPECIFICATION Contents Section Title Page 1 (05/01) British Standards 2 2 (05/01) British Standard Drafts for Development (DD) Documents 39 3 (05/01) European
More informationNotification of a Body pursuant to article 10 of the Construction Products Directive 89/106/EEC
Notification of a Body pursuant to article 10 of the Construction Products Directive 89/106/EEC From : Ministry of VROM - Cluster Bouwkwaliteit Rijnstraat 8 P.O. Box 30941 2500 GX Den Haag Netherlands
More informationThe Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
More informationThe Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC17065:2012 to provide product conformity certification Bucknalls Lane Garston Watford Hertfordshire WD25 9XX Contact: Mr M Pratt Tel:
More informationAnnex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
More informationJoint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
More informationIntegrating safety in new transport infrastructure construction projects
Integrating safety in new transport infrastructure construction projects Road safety equipment standardization Belgrade 2005-11-17 Amilcar da Costa CEN Management Centre www.cenorm.be 2005 11 17 ADC 1
More informationSTS Directory Accreditation number: STS 0030
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
More informationSKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2016 do 31. 7. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
More informationThe Laboratory is qualified to update standards identifying the test procedures. The Laboratory is qualified to carry out independent sampling.
Testing laboratory locations: 1. Testing Laboratory in Prague (0100) Prosecká 811/76a, 190 00 Praha 9 2. Testing Laboratory in České Budějovice (0200) 3. Testing Laboratory in Plzeň (0300) Zahradní 15,
More informationSITE SYSTEMS: FANNIE MAE EXPECTED USEFUL LIFE TABLES (FMEUL)
SITE SYSTEMS: FANNIE MAE EXPECTED USEFUL LIFE TABLES (FMEUL) Basketball Courts 15 25 Built Improvements Playgrounds, Site Furniture, etc. 20 20 Catch Basin 40 40 Cold Water Lines 40 40 Compactors DHW Supply
More informationDr. Peter Brändlein, Thomas Gahm
Dr. Peter Brändlein, Thomas Gahm SUBJEcT: THE CONSTRUCTION PRODUCTS DIRECTIVE IN THE PRACTICE THE CONSTRUCTION PRODUCTS DIRECTIVE (COUNCIL DIRECTIVE 89/106/CE) Council Directive 89/106/EEC of 21 December
More informationAFFORDABLE CANADIAN HOME INSPECTIONS
AFFORDABLE CANADIAN HOME INSPECTIONS Al Wright Hamilton, Ontario Cell: 905-730-9300 Expectancy of Household Components Appliances Compactors 7-12 Dishwashers 9-16 Disposal, Food Waste 11-16 Dryers 11-16
More informationSECTION GYPSUM PLASTER
SECTION 09210 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation for support of gypsum plaster used as a finish for partitions and ceilings
More informationThe Laboratory is qualified to update standards identifying the test procedures. Test procedure/ method identification
Testing laboratory locations: 1. Testing Laboratory in Prague (0100) Prosecká 811/76a, 190 00 Praha 9 2. Testing Laboratory in České Budějovice (0200) 3. Testing Laboratory in Plzeň (0300) Zahradní 15,
More informationDesign Standards Manual
Design Standards Manual Table of Contents: Part III (Divisions 1-32) Section No. Title Revision DIVISION 1: GENERAL REQUIREMENTS 01524 Construction Waste Management 05/07 01815 HVAC Commissioning Requirements
More informationCEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling. EN 107:1980 Methods of testing windows - Mechanical test 89/106/EEC
C/TC 33 - Doors, windows, shutters, building hardware and curtain walling Standard reference Title Directive 107:1980 Methods of testing windows - Mechanical test 129:1984 130:1984 179:2008 477:1995 478:1995
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More information(Text with EEA relevance) Reference and title of the harmonised standard (and reference document) EN 26:1997/A1:2000 Note 3 Date expired (18.7.
C 349/6 Official Journal of the European Union 22.12.2010 Commission communication in the framework of the implementation of the European Parliament and the Council Directive 2009/142/EC relating to appliances
More informationAPARTMENTS CRIKVENICA DRAMALJ, VUKOVARSKA 105
APARTMENTS CRIKVENICA DRAMALJ, VUKOVARSKA 105 Investor: Franjo i Zdenka Židov, Samobor +385 (0) 91 2220 250 mariozidov@gmail.com Page 1 Investor: Franjo i Zdenka Židov, Samobor +385 (0) 91 2220 250 mariozidov@gmail.com
More information2015 MECHANICAL CODE REQUIREMENTS
2015 MECHANICAL CODE REQUIREMENTS ANTRIM COUNTY BUILDING DEPARTMENT PO BOX 188 205 CAYUGA STREET BELLAIRE, MI 49615 (231) 533-8373 FAX (231) 533-6041 Mechanical requirements for residential buildings per
More informationAggregates Table 1 No. Title Options
Aggregates Table 1 BS EN 932-1 Methods for sampling From stockpiles BS EN 932-2 Methods for reducing laboratory samples BS EN 932-3 BS EN 933-1 BS EN 933-2 Procedure and terminology for simplified petrographic
More informationStandard Name Standard number Adopted standard
5 September 2014 SII-IMQ Agreement Categories and Standards List Audio/video equipment (TRON) Office & Data equipment (OFF) Medical equipment (MED) Measurement equipment (MEAS) Household and similar equipment
More informationESSAY: This will be a written paper of 6 essay questions. Candidates are to answer 5 questions in 2 hours for 60 marks.
260 PLUMBING AND PIPE FITTING Examination Structure The examination for this syllabus will cover three major areas of groupings with 193 Building Engineering and 191 General Metal Work as trade-related
More informationTABLE OF CONTENTS. Part I Administrative
Part I Administrative.......................... 1-1 CHAPTER 1 SCOPE AND ADMINISTRATION. 1-1 R101 General............................. 1-1 R102 Applicability......................... 1-2 R103 (Not adopted)........................
More informationWARM WATER UNDERFLOOR HEATING SYSTEMS. Guidance Notes
WARM WATER UNDERFLOOR HEATING SYSTEMS Guidance Notes 02 WARM WATER UNDERFLOOR HEATING SYSTEMS Introduction Underfloor heating systems consist of a series of pipes which are integrated into the floor structure
More informationStandards Manager Web Standards List ULC-Underwriters Laboratories of Canada
Standards Manager Web Standards List ULC-Underwriters Laboratories of Canada Id Number Title Year Organization Page 1 ANSI.CAN.UL. NULL 2016 ULC 64 1201 2 CAN.ULC- NULL 2016 ULC 176 60839-11-1-2016 3 CAN.ULC-IEC
More informationINTERNAL FRAMING PROFILES
INTERNAL FRAMING PROFILES Ceiling Furring Sections Dry-Wall Partitioning Sections Angle Beads And Accessories About the Hadley Group Hadley Industries is one of Europe s leading manufacturers of cold rollformed
More informationDIVISION 10 SPECIALTIES
DIVISION 10 SPECIALTIES 11/11 SECTION 10 21 13.16 PLASTIC LAMINATE TOILET COMPARTMENTS PART 1 - GENERAL 1.01 SECTION INCLUDES Plastic laminate toilet compartments, urinal screens, head rail braced. 1.02
More informationGeomembranes and Geosynthetic Clay Liners (GCLs)
Geomembranes and Geosynthetic Clay Liners (GCLs) Geosynthetic Materials Association 800 636 5042 www.gmanow.com gmatechline@ifai.com Geomembranes are essentially impermeable polymeric lining materials
More informationIBC Committee Responsibility Matrix January 2017
IBC Committee Responsibility Matrix January 2017 Chapter 1 ADMIN same Chapter 3 High-Hazard Group H 307.1 same IFC same Uses Other Than Group H 307.1.1 same IFC same Hazardoss Materials 307.1.2 307.2 IFC
More information1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications
1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications Product type Application Specification Appliances Bedpan
More information(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur.
First Revision No. 1-NFPA 501-2015 [ Section No. 5.3.1.3 ] 5.3.1.3 The following conditions shall be met when an interior finish material is tested using the test protocol of NFPA 286, Standard Methods
More information1.1 SECTION INCLUDES.1 Materials and installation for aboveground oil storage tanks..2 Section Waste Management and Disposal.
Page 1 of 8 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Materials and installation for aboveground oil storage tanks. 1.2 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management
More informationTABLE OF CONTENTS. Part I Administrative... 1
Part I Administrative............................ 1 CHAPTER 1 Deleted Part II Definitions.............................. 3 CHAPTER 2 DEFINITIONS.................... 3 R201 General..................................
More informationProduct Catalogue WB Engineering Containers. fast inexpensive safe flexible certified
Product Catalogue WB Engineering Containers fast inexpensive safe flexible certified Table of Content Product Catalogue Key data WBEC - Standard & Premium Key data WBEC - Standard model Key data WBEC Premium
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 11/06/2017
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity 20 Park Street Princes Risborough Buckinghamshire HP27 9AH Contact: Ian Woodhouse Tel: +44
More informationTABLE OF CONTENTS Limitations of Authority...6 Table Swimming Pool, Spa, and Hot Tub Permit Fees...7
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION..............1 101.0 General.......................1 101.1 Title..........................1 101.2 Scope........................1 101.3 Purpose......................1
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationModern Exteriors Stylish Kitchens Designer Bathrooms Comtemporary Living Fixtures & Finishes Schedule Inclusions Brochure
Modern Exteriors Stylish Kitchens Designer Bathrooms Comtemporary Living Inclusions Brochure Fixtures & Finishes Schedule WELL APPOINTED Modern Exteriors Brick veneer Powder coated aluminium windows with
More informationPRICE BID. UNIT QTY Rate in Figure Rate in words Amount DESCRIPTION OF ITEM D: FIRE PROTECTION SYSTEM
ANNEXUREIII D: FIRE PROTECTION SYSTEM SECTION ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM Supply, Installation, testing and commissioning of Analogue Addressable Fire Alarm Control panel with battery backup
More informationDARTMOUTH COLLEGE DESIGN March 15, 2003 & CONSTRUCTION GUIDELINES
SECTION 15830 HEATING & COOLING TERMINAL UNITS PART 1 DESIGN DIRECTIVES 1.1 DESIGN CRITERIA A. All fan coil units shall be sized to meet design load while operating at medium speed. In extreme noise sensitive
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 12/12/2018
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationTABLE OF CONTENTS. Site preparation 2 Placement. 2 Chimney and stove pipe connections. 2
TABLE OF CONTENTS SECTION TITLE PAGE 1. SITE PREPARATION AND INSTALLATION Site preparation 2 Placement. 2 Chimney and stove pipe connections. 2 Installation. 3 Water supply and return.. 3 Pressure/relief
More informationFacility Condition Assessment Summary Report. British Columbia Institute of Technology NE6 - Plumbing and Pipefit Building
Facility Condition Assessment Summary Report British Columbia Institute of Technology NE6 - Plumbing and Pipefit Building Submitted by: VFA Canada Corp. Burnaby Centre 4211 Kingsway Burnaby, BC V5H 1Z6
More informationFire Safety Fire Resistant Building Components
Fire Safety Fire Resistant Building Components NBN 713-020 1968 Fire fighting - Fire performance of building materials and products - Fire resistance of building materials NBN 713-020/A1 1982 Protection
More informationSteve Ramsey Home Inspections
Steve Ramsey Home Inspections I. STRUCTURAL SYSTEMS X A. Foundations Type of Foundation(s): Slab Foundation There is evidence of some foundation movement. Excessive caulk around windows, mortar and brick
More informationAccreditation Schedule
JOINT ACCREDITATION SYSTEM OF AUSTRALIA AND NEW ZEALAND HELPING MARKETS WORK BETTER AUSTRALIA FECCA House, 4 Phipps Close, Deakin, ACT 2600 PO Box 304, Deakin West, ACT 2605 P: +61 (0)2 6232 2000 NEW ZEALAND
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Holmesfield Road Warrington Cheshire WA1 2DS Contact: Mr D Brown Tel: +44 (0)1925-655116 Fax: +44 (0)1925-655419 E-Mail: david.brown@exova.com Website:
More informationSTS Directory Accreditation number: STS 0329
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Laboroute SA Laboratoire de recherche et de contrôle des matériaux routiers Route de l Industrie 78 CH-1564 Domdidier
More informationAnnex of the certificate (Page 1/7) Accreditation Scope
Annex of the certificate (Page 1/7) As a Testing Laboratory Address: Organize Sanayi Bölgesi 10. Cadde No: 4 Melikgazi 38070 KAYSERİ/TÜRKİYE Phone : 90 352 321 11 06 Fax : 90 352 321 15 69 E-Mail : kayserilab@tse.org.tr
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK to provide product conformity Stocking Lane High Wycombe Buckinghamshire HP14 4ND Contact: Mr Alan Gower Tel: +44 (0)1494 569700 Fax: +44
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationTABLE OF CONTENTS. Part I Administrative... 1
Part I Administrative............................ 1 CHAPTER 1 ADMINISTRATION............... 1 R101 Title, Scope and Purpose.................... 1 R102 Applicability.............................. 1 R103
More information(Notices) EUROPEAN COMMISSION
14.8.2012 Official Journal of the European Union C 245/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationSECTION OVERHEAD COILING FIRE DOORS
SECTION 08331 OVERHEAD COILING FIRE DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word click on round Windows logo in top left corner,
More informationFIREPRO FIRESTOPPING AND PENETRATION SEALS PRODUCT GUIDE
Superior 4 in 1 insulation (59) Y November 2008 (K22) FIREPRO FIRESTOPPING AND PENETRATION SEALS PRODUCT GUIDE Superior 4 in 1 insulation STRAIGHT FROM THE SOURCE S MOUTH... Introducing the most reliable
More informationAverage Life Span of Homes, Appliances, and Mechanicals
Average Life Span of Homes, Appliances, and Mechanicals The following charts detail the predicted life expectancy of household materials and components. Interior and exterior paints can last for 15 years
More informationLuckdrops. Technical Spec Sheet. Studio+ Modular Home
Luckdrops Technical Spec Sheet Studio+ Modular Home Base Structure Container Type 40 Foot HC ISO Container Upcycled Container made from corten steel with marine grade enamel finish. Square Footage Interior:
More informationETICS & HARMONIZATION The challenges
ETICS & HARMONIZATION The challenges Ralf Pasker Managing Director European Association for ETICS (EAE) European ETICS Forum 2015 ETICS & harmonization The Challenges 12/10/2015 Ralf Pasker 1 Components
More information2. HORIZONTAL DATUM = NAD 83. VERTICAL DATUM = NAVD 88.
1. EXISTING CONDITIONS AND UTILITY INFORMATION SHOWN ON THESE PLANS ARE BASED ON A SET OF PLANS ENTITLED "SCHOOL OF COMMUNICATIONS AND MEDIA BUILDING AND LIFE HALL RENOVATION" DATED MARCH 11, 2015 REVISED
More information1.1 This section applies to air handling units for HVAC Systems.
AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling
More informationNomenclature. 1.4 Sand equivalent dimensions measurement, weight measurement STN EN PP-001 X
Scope of the accreditation Name of the accredited body: Building testing and research institute, n. o. Studená 3, 821 04 Bratislava, Slovakia Testing laboratory ID Number: 31 821 987 Testing workplace
More informationOFFICINE MINUTE VILLORBA - TREVISO
OFFICINE MINUTE VILLORBA - TREVISO A15 A23 A25 A22 A23 A12 A14 A10 A21 A4 A3 A21 A2 A5 A21 A7 A21 A16 A17 A18 A21 A8 A1 A13 A14 A9 A19 A11 A20 A24 A1 - Linear gas burner A2 - Air mixing area A3 - Hot air
More informationTe c h S p e c 3. Edge Restraints for Interlocking Concrete Pavements
Te c h S p e c 3 Edge Restraints for Interlocking Concrete Pavements Introduction Edge restraints are an essential component of interlocking concrete pavements. Restraints hold the pavers tightly together,
More informationZakres notyfikacji UE dla IMQ. IMQ ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ S.P.A. Via Quintiliano, MILANO Country : Italy
http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=notifiedbody.notifiedbody&refe_cd= EPOS_43373&version_no=20&lst_version_no=20,9,8,7,6,5,4,3,2,,0,9,8,7,6,5,4,3,2,&max_ver sion=20&history_flg=y
More informationC O D E S & A M M E N D M E N T S
SEVIER COUNTY UTILITY DISTRICT SEPTEMBER 2, 2014 Sevier County Utility District has adopted the 2009 International Fuel Gas Code for gas inspections. The following pages contain frequently used codes and
More informationEROSION & SEDIMENT CONTROL
EROSION & SEDIMENT CONTROL 1 EROSION & SEDIMENT CONTROL Effective Soil & Water Protection Whether you want to prevent soil erosion caused by rain, water and wind, or protect waterways from inevitable build
More informationtççç= ÜÉ~íáåÖ çéíáçåë
3. tççç= ÜÉ~íáåÖ çéíáçåë There are several different types of wood-heating appliances to choose from. Each type is intended for a particular use, and each has its own set of advantages and disadvantages.
More informationAbove Ground Fuel Tank Requirements
FIRE DEPARTMENT in cooperation with Above Ground Fuel Tank Requirements The purpose of this document is to provide information about general Fire Code requirements for above ground storage within the unincorporated
More informationDIVISION 15 MECHANICAL
DIVISION 15 MECHANICAL A. GENERAL DESIGN CONDITIONS 1. Design occupied spaces to maintain 72 F and a space dew point temperature not to exceed 55 F. 2. Design classroom and office space buildings with
More informationCITY & COUNTY OF DENVER COMMUNITY PLANNING & DEVELOPMENT BUILDING PERMIT POLICY
Number: ADMIN 120A Issued Date: March 21, 2016 Page: 1 of 10 Reference: ADMIN Section 120 LICENSES AND REGISTRATIONS General. There shall be various classes of licenses and an electrical registration,
More informationCHAPTER 7 ALTERATIONS LEVEL
CHAPTER 7 ALTERATIONS LEVEL 2 SECTION 701 GENERAL 701.1 Scope. Level 2 alterations as described in Section 404 shall comply with the requirements of this chapter. Exception: Buildings in which the reconfiguration
More informationCivil engineering Fibertex Geotextiles
C O N S T R U C T I O N 100.06 Civil engineering C O N S T R Constructing with Fibertex offers a full range of nonwoven geotextiles designed for use in many different foundation structures within civil
More informationHeating, Air Conditioning, Ventilation. Отопление-Кондиционеры-Вентиляция. MTM 8-30 kw UNIVERSAL OIL HEATER OPERATING MANUAL
Heating, Air Conditioning, Ventilation Отопление-Кондиционеры-Вентиляция MTM 8-30 kw UNIVERSAL OIL HEATER OPERATING MANUAL 1. Usage MTM 8-30 universal oil heater is designed for heating commercial rooms
More informationNr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
More information