Bulletin 855X Horns, Beacons, and Loudspeakers... Page 11-65

Transcription

1 Signaling Table of Contents Panel Mount Signaling Alarms Bulletin P Sounders... Page - Bulletin PC Sounders with LED... Page - Bulletin PS Strobes... Page - Bulletin PB Selectable Steady or Flashing LED... Page - Bulletin PD Dual Circuit Alarms... Page - Bulletin L Panel Light Bars... Page - Industrial Horns and Beacons Bulletin H General Purpose Electronic Horns... Page - Bulletin H High-Performance Electronic Horns... Page - Bulletin H High-Performance Electronic Horns with Attached Strobe Beacons... Page - Bulletin B Mini-Square Beacons... Page - Bulletin BS mm Round Beacons... Page - Bulletin BM mm Round Beacons... Page - Bulletin BL mm Round Beacons... Page - Signal and Control Tower Lights Bulletin D mm Compact Control Tower Stack Lights... Page - Bulletin F mm Compact Control Tower Stack Lights... Web Bulletin E mm Control Tower Stack Lights... Page - Bulletin T mm Control Tower Stack Lights... Page - Bulletin W Wall Mount Signal Lights... Page - Hazardous Location Devices Bulletin X Horns, Beacons, and Loudspeakers... Page - Information for this product line is available on the Industrial Controls Catalog website: Publication A-CAA-EN-P -

2 Bulletin P, L Panel Mount Signaling Alarms and Light Bars Product Overview Type Bulletin P PC PS PB PD Mounting Hole Size Environmental Rating Voltages Available Panel Mount Sounder. or. mm with hole adapter kit V AC/DC, V AC, V AC Illumination Type Lens Color Available Panel Mount Sounder with LED. or. mm with hole adapter kit V AC/DC, V AC/DC, V AC, V AC LED (selectable flashing or continuous), red, amber, blue, yellow, clear Panel Mount Strobe. or. mm with hole adapter kit UL Type /X/, IP V AC/DC, V AC/DC, V AC, V AC Strobe, red, amber, blue, yellow, clear Panel Mount LED Beacon. or. mm with hole adapter kit V AC/DC, V AC/DC, V AC, V AC LED (selectable flashing or continuous), red, amber, blue, yellow, clear Panel Mount Dual Circuit Alarms. or. mm with hole adapter kit V AC/DC, V AC/DC, V AC, V AC LED (continuous only), red, amber, blue, yellow, clear Operating Temperature - + C - + C - + C - + C - + C Sound Output Sound Type,, or db Continuous, pulsing, or wobble (LE) or db Continuous, pulsing, or wobble (LE) Minimum Sound Level < db < db Steady-State Current ma ma ma ma ma Diameter,, mm, mm,, mm,, mm,, mm Certifications culus Listed, CE Marked culus Listed, CE Marked culus Listed, CE Marked culus Listed, CE Marked culus Listed, CE Marked Product Selection Page - Page - Page - Page - Page - Bulletin L Type Panel Light Bars Operating Temperature - + F (- + C) Storage Temperature - + F (- + C) Wire Size AWG (.. mm) Light Beam Angle ~ LED Color White Light Output lumens Lens Material Polycarbonate (clear) Base Material Polycarbonate (light grey) Weight < lbs ( g) Standards Compliance EN--, EN--, EN-- Certifications CE Marked Product Selection Page - - Publication A-CAA-EN-P

3 Bulletin P Panel Mount Signaling Alarms Product Selection Bulletin P Panel Mount Signaling Alarms Mounts in standard. mm hole Watertight panel alarms in three different sizes Sound output meter UL Type /X/, IP Combination sounder and LED products Panel mount strobe or LED indicator products Plug-in terminal blocks, IPX finger-safe rated Single-circuit functions include: - Sounder with selectable continuous or pulsing tone (also wobble on mm) - Combined sounder with LED beacon - Xenon flashing strobe - LED beacon, selectable steady, or flashing Dual-circuit functions include: - Two-color LED beacon half-lens illumination - Two-color LED beacon full-lens illumination - Combined sounder with LED beacon Table of Contents Product Selection... this page Accessories... - Specifications... - Approximate Dimensions... - Standards Compliance EN/IEC - EN/IEC -- UL CSA C. No. Certifications culus Listed (File No. E, Guides NKCR, NKCR) CE Marked Product Selection Bulletin P Panel Mount Sounder P B ME a b c d B mm Panel Mount Sounder mm Panel Mount Sounder mm Panel Mount Sounder a Housing Color Black b Voltage V AC/DC V AC V AC SE SH ME LE c Size mm, fully-enclosed, smooth front, db mm, high output, db mm mm d Mounting Hole. mm Voltage Cat. No. V AC/DC V AC mm diameter, fully-enclosed, smooth front, db P-BSE mm diameter, high output, db P-BSH mm diameter, db P-BME mm diameter, db P-BLE mm diameter, fully-enclosed, smooth front, db P-BSE mm diameter, high output, db P-BSH mm diameter, db P-BME mm diameter, db P-BLE Publication A-CAA-EN-P -

4 Bulletin P Panel Mount Signaling Alarms Product Selection Bulletin PC Panel Mount Combined Sounder with LED Beacon PC B ME a b c d e mm Panel Mount Combined Sounder with LED Beacon mm Panel Mount Combined Sounder with LED Beacon Housing Color B Black a b Voltage V AC/DC V AC/DC V AC V AC ME LE c Diameter mm mm d Lens Color Clear Yellow e Mounting Hole. mm Voltage Diameter [mm] Lens Color Cat. No. V AC/DC PC-BME PC-BME PC-BLE PC-BLE V AC PC-BME PC-BME PC-BLE PC-BLE - Publication A-CAA-EN-P

5 Bulletin P Panel Mount Signaling Alarms Product Selection Bulletin PS Panel Mount Strobe PS B ME a b c d e B mm Panel Mount Strobe mm Panel Mount Strobe mm Panel Mount Strobe a Housing Color b Black Voltage V AC/DC V AC/DC V AC V AC V AC/DC SE ME LE c Diameter mm mm mm Only available in V AC/DC, V AC/DC, V AC, or V AC. Only available in V AC/DC, V, or V AC. d Lens Color Clear Yellow e Mounting Hole. mm Voltage Diameter [mm] Lens Color Cat. No. V AC/DC V AC/DC V AC mm units are LED type. and mm units are Xenon strobe. PS-BSE PS-BSE PS-BME PS-BME PS-BLE PS-BLE PS-BSE PS-BSE PS-BME PS-BME PS-BLE PS-BLE Publication A-CAA-EN-P -

6 Bulletin P Panel Mount Signaling Alarms Product Selection Bulletin PB Panel Mount Selectable Steady or Flashing LED Beacon PB B ME a b c d e mm Panel Mount LED Beacon mm Panel Mount LED Beacon mm Panel Mount LED Beacon a c d Housing Color Diameter Lens Color B Black SE mm b Voltage V AC/DC V AC/DC V AC V AC ME mm LE mm Clear Yellow. mm Voltage Diameter [mm] Lens Color Cat. No. PB-BSE PB-BSE V AC/DC PB-BME PB-BME PB-BLE PB-BLE PB-BSE PB-BSE V AC PB-BME PB-BME PB-BLE PB-BLE e Mounting Hole - Publication A-CAA-EN-P

7 Bulletin P Panel Mount Signaling Alarms Product Selection Bulletin PD Panel Mount Dual Circuit Alarms PD B ME F a b c d e f g B a Housing Color b Black Voltage V AC/DC V AC/DC V AC V AC SE ME LE Half-Lens Illumination Full-Lens Illumination Combined Sounder with LED Beacon c Diameter mm mm mm F H C d Function -color, full-lens illumination -color, half-lens illumination wtih barrier Combined sounder with LED beacon e LED Color /Sound Sound Clear Yellow f LED Color Clear Yellow g Mounting Hole. mm mm available in V AC/DC only, for -color versions. The sounder with LED is not available in the mm size. Voltage code is only valid for sounder with LED devices. The color combination of Yellow and is not allowed because of their similarity. For two-color devices, the first color code listed in the cat. no. corresponds to the same side as the panel tab found on the housing. For example: Cat. No. PD-BMEH indicates that the color is on the same side as the panel tab and the color is on the opposite side as the panel tab. The products listed in the table below are typically in stock. Additional configurations (voltage, size, color, and sound) are available with extended leadtimes. Contact your local Rockwell Automation sales office or Allen-Bradley distributor for details on availability and pricing. Function Voltage Diameter [mm] Color(s) Cat. No. Sounder with LED Half-lens, Steady LED Beacon Full-lens, Steady LED Beacon V AC/DC V AC V AC/DC V AC V AC/DC V AC PD-BMEC PD-BMEC PD-BLEC PD-BLEC PD-BMEC PD-BMEC PD-BLEC PD-BLEC PD-BSEH & PD-BMEH PD-BLEH PD-BMEH & PD-BLEH PD-BSEF & PD-BMEF PD-BLEF PD-BMEF & PD-BLEF Accessories.. mm Hole adapter kit Cat. No. P-AHA Publication A-CAA-EN-P -

8 Bulletin P Panel Mount Signaling Alarms Specifications Panel Sounder and Single/Dual Circuit Panel Sounder with LED Technical Housing: Base Material Polycarbonate, black Lens Polycarbonate, red, amber, yellow, green, blue, and clear Protection class UL Type /X/, IP Terminals Plug-in terminal block, up to. mm ( AWG), IPX Operation temperature range - + C (- F) Storage temperature range - + C (- F) Mounting Central mounting for bore holes mm or. mm with hole adapter kit (Cat. No. P-AHA) Mounting nut torque. N m ( lb in) Electrical Sounder Sounder with Warning Light mm mm mm mm mm V AC/DC - / Hz +/ % +/ % V AC/DC - / Hz +/ % +/ % Supply voltage range V AC/DC - / Hz V AC/DC V AC/DC V AC/DC V AC - / Hz V AC V AC V AC +/ % +/ % /V AC - / Hz V AC V AC V AC +/ % +/ % V AC/DC - / Hz ma ( ma) ma ( ma) Nominal current V AC/DC - / Hz ma ma ma ma ( ma) ma ( ma) single circuit (dual circuit) V AC - / Hz ma ma ma ma ( ma) ma ( ma) /V AC - / Hz ma ma ma ma ( ma) ma ( ma) Turn-on leakage current ma ma ma ma ma Maximum sound level (average) m m SE: m SH: m m m Minimum sound level < db < db < db < db Sound level adjustment Stepless Stepless Stepless Stepless Sound main frequency Hz Hz Hz Hz Hz Continuous Yes Yes Yes Yes Yes Sound types Pulsing Yes Yes Yes Yes Yes Alternating frequency Yes No No Yes No Sound selection Externally by terminal connection Weight g g g g g Single Circuit only. - Publication A-CAA-EN-P

9 Bulletin P Panel Mount Signaling Alarms Specifications/Approximate Dimensions Panel Strobe and Single/Two Color LED Lights Base Material Housing: Lens Protection class Terminals Operation temperature range Storage temperature range Mounting Mounting nut torque Supply voltage range Nominal current single color (two color w/ full or half illumination) Technical Polycarbonate, black Polycarbonate, red, amber, yellow, green, blue, and clear UL Type /X/, IPX, IP Plug-in terminal block, up to. mm ( AWG), IPX finger-safe - + C (- + F) - + C (- + F) Central mounting for bore holes mm or. mm with hole adapter kit (Cat. No. P-AHA). N m ( ib in) Electrical LED Beacon Steady/Flashing Strobe Light mm mm mm mm mm mm V AC/DC - / Hz +/ % +/ % +/ % +/ % V AC/DC - / Hz +/ % +/ % +/ % +/ % V AC/DC / Hz V AC/DC V AC/DC V AC - / Hz +/ % +/ % +/ % +/ % +/ % +/ % /V AC - / Hz +/ % +/ % +/ % +/ % +/ % +/ % V AC/DC - / Hz ma ma ma ma V AC/DC - / Hz ma (full: ma half: ma) ma (full: ma half: ma) ma (full: ma half: ma) ma V AC/DC / V ma ma V AC/DC / V ma ma V AC - / Hz /V AC - / Hz ma (full: ma half: ma) ma (full: ma half: ma) ma (full: ma half: ma) ma (full: ma half: ma) ma ma ma ma ma ma ma ma Turn-on leakage current ma ma ma ma ma ma Steady/Flashing light Externally by terminal connection Flashing frequency Hz Hz Hz min.. Hz min.. Hz min.. Hz Light source LED Xenon tube LED Flash energy J. J Weight g g g g g g Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. mm Sounder mm Sounder mm Sounder Terminal connector adds mm (. in.) to back of panel depth. Terminal connector adds mm (. in.) to back of panel depth. Publication A-CAA-EN-P -

10 Bulletin P Panel Mount Signaling Alarms Approximate Dimensions mm Combined Sounder with LED Beacon mm Combined Sounder with LED Beacon mm LED mm Strobe mm LED mm Strobe mm LED mm Strobe Terminal connector adds mm (. in.) to back of panel depth. Terminal connector adds mm (. in.) to back of panel depth. - Publication A-CAA-EN-P

11 Bulletin L Panel Light Bars Product Overview/Selection and Specifications Cat. No. L-NX Bulletin L Panel Light Bars Long LED life unlike fluorescent lights Energy savings, minimum impact on power supply size Ideal for environments with high shock and vibration No transformer required Low weight due to absence of heavy ballast No electrical noise unlike fluorescent fixtures Low heat output Solid light without flicker No need to ship separate components once the panel is assembled No glass or hazardous waste Standards Compliance EN-- EN-- EN-- Certifications CE Marked Cat. No. L-NX Product Selection Supply Voltage Cat. No. V AC/DC / Hz L-NX With On/Off switch / /V AC/DC / Hz L-NX V AC/DC / Hz L-NX Without On/Off switch / /V AC/DC / Hz L-NX Specifications L-NX ( V with ON/OFF switch) L-NX ( V - no switch) L-NX ( V with ON/OFF switch) L-NX ( V - no switch) Nominal Input Voltage V AC/DC / Hz V AC/DC / Hz Input Voltage Limits V DC V AC / Hz V DC V AC / Hz Nominal Current ~ V DC/ ~ V DC < V AC/ < V AC Inrush Current ~ V DC, + C ~. V AC/ ~. V AC Leakage Current Immunity > ma DC > ma AC/~ ma DC Ingress Protection L-NX: NEMA, IP L-NX: NEMA, IP L-NX: NEMA, IP L-NX: NEMA, IP Operating Temperature Range - + F (- + C) Storage Temperature Range - + F (- + C) Wire Size AWG (.. mm) Light Beam Angle ~ LED Color White Light Output lumens Lens Material Polycarbonate (clear) Base Material Polycarbonate (light grey) Mounting Orientation No restrictions Mounting Screws X / in. (M/ M) Weight < lb ( g) Standards Compliance EN--, EN--, EN-- Certifications CE Marked LED MTFB hr Not provided. Publication A-CAA-EN-P -

12 Bulletin L Panel Light Bars Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. mm (. in.) mm (. in.) mm (. in.) mm (. in.) - Publication A-CAA-EN-P

13 Bulletin H, B Industrial Horns and Beacons Product Overview Type Voltages Available Bulletin H B BS BM BL General Purpose Horns and High Performance Horns (with or without Beacons) General Purpose Horn (Standard): V AC/DC / Hz, V AC / Hz, V AC / Hz General Purpose Horn (Enhanced): V DC, V AC/DC High Performance Horn: V DC, V AC / Hz, V AC / Hz, V AC / Hz High Performance Horn w/beacon: V DC, V DC, V AC / Hz, V AC / Hz, V AC / Hz Square Beacons V AC/DC, V AC / Hz, V AC / Hz Illumination Type J strobe J strobe Round Beacons mm mm mm V AC/DC, V AC/DC, V AC / Hz, V AC / Hz LED, J strobe, or W halogen J strobe or W halogen Flash Rate Hz Hz strobe and flashing halogen Lens Colors Available Environmental Rating Operating Temp. Range Steady-State Current, green, amber, blue, yellow, clear General Purpose Horn: Semiflush: UL Type /R, IP Surface: UL Type /X//R, IP High Performance Horn: UL Type /R, IP, green, amber, blue, yellow, clear Type, IP - + C - + C General Purpose Horn: ma High Performance Horn: Range A: ma Range B & C: ma Range D: ma Range E: ma V AC/DC (/ ma), V AC ( ma), V AC ( ma) - + C except steady halogen and /V single-color LED are - + C, green, amber, blue, yellow, clear UL Type /X/, IP - + C, except rotating and steady halogen are - + C J strobe or W halogen - + C except rotating and steady halogen are - + C.. A.. A.. A Sound Output db Horn Tones Volume Adjustable Circuits Available Horn Cover, Base, Beacon Housing, and Lens Material Illumination Functions General Purpose Horn: Tones High Performance Horn: Range A: Tones Range B & C: Tones Range D & E: Tones Range A, B, C: db from max. Range D, E: db from max. General Purpose Horn: on GPA units, on GPE units High Performance Horn: Range A: on DC units, on AC units Range B, C, D, E: on all units Polycarbonate (except for ABS: High Performance Horn cover & base) Polycarbonate Polycarbonate LED (single, strobe, multi-color) Strobe, rotating, steady or flashing, halogen Certifications culus Listed, CE culus Listed, CE culus Listed, CE Product Selection Page - Page - Page - Publication A-CAA-EN-P -

14 Bulletin H General Purpose Electronic Horns Product Selection/Accessories Bulletin H General Purpose Electronic Horns db(a) max. (standard version), db(a) max. (enhanced version) Three user-selectable tones to better contrast ambient noise Two stages available in the enhanced version Stepless volume control via potentiometer to adjust to changing ambient noise Lower current consumption at approximately half to one tenth of electromechanical alternative Longer life and maintenance-free due to non-moving parts and highly reliable discrete components No back EMF at switch off Suitable for humid, dirty, and corrosive environments Surface mount version rated UL Type /X//R, IP Semi-flush mount version rated UL Type R/, IP UV-stable plastics ideal for outdoors General Purpose Electronic Horns Single- or dual-circuit, selectable tone horns, with volume control, for use in general signaling applications. H SG GPA a b c Table of Contents Product Selection... this page Accessories... this page Specifications... - Approximate Dimensions... - Standards Compliance UL CSA C. No. EN/IEC - EN/IEC -- EN -- EN -- Certifications culus Listed (File No. S, Guides UCST, UCST) CE Marked FG SG a Mounting Type Semi-flush wall plate, grey housing Surface base with two conduit entrances, grey housing Voltage V AC/DC V AC V AC V DC V AC/DC / Hz Note: Horn type GPE (Table c) not valid with mounting type FG (Table a) or with voltage codes,, and (Table b). Horn type GPA (Table c) not valid with voltage codes and (Table b). Surface base with conduit entrance Semi-flush wall plate b GPA GPE c Horn Type General purpose, db(a) max., single stage/circuit, three tones Enhanced version, db(a) m, two stage, three tones, volume control Mounting Type Function Supply Voltage Cat. No. Standard Enhanced Standard V AC/DC V AC V AC V DC V AC/DC V AC/DC V AC V AC H-SGGPA H-SGGPA H-SGGPA H-SGGPE H-SGGPE H-FGGPA H-FGGPA H-FGGPA Accessories Cat. No. M Hole Plug Replacement Kit For use with mounting type SG only H-AHPK - Publication A-CAA-EN-P

15 Bulletin H General Purpose Electronic Horns Specifications/Approximate Dimensions Specifications General Purpose Electronic Horns Environmental Ratings Ingress Ratings Semi-flush Mount UL Type R/, IP Surface Mount UL Type /X//R, IP Operating Storage Temperature Ranges - + C (- + F) - + C (- + F) Materials Housings including horn cover and base Polycarbonate O-ring NBR Gasket (mounting type FG) EPDM/SBR closed cell foam Performance Ratings Sound Output ± m (standard), ± m (enhanced) Operating Voltages and Currents DC Voltage AC Voltage V DC (+/-%) V AC / Hz (+/-%) V AC / Hz (+/-%) V AC / Hz (+/-%) Input Voltage Ranges Standard (GPA) Enhanced (GPE) V DC V AC/DC Output Nominal Voltage ma ma ma ma Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Semi-flush Mount Surface Mount. [. ]. [. ]. [. ]. [. ]. [. ]. [. ] Publication A-CAA-EN-P -

16 Bulletin H High-Performance Horns Product Selection High-Performance Electronic Horns Bulletin H High-Performance Electronic Horns Available as stand-alone electronic horn or with optional xenon strobe beacon Decibel range... meter, in five sizes to meet broad range of applications Up to three stages/circuits in each horn to reduce initial and installation costs when multi-status indication is required Up to tone sets selectable via dip-switches Automatic tone synchronization when multiple horns are connected Lower current consumption compared to electromechanical alternative Fine volume control via potentiometer to compensate for changing ambient noise Longer life and maintenance-free, due to non-moving parts and highly reliable discrete components UV-stable plastic housing, ideal for outdoors UL Type /R, IP H B D B D a b c d Table of Contents Industrial Horns... this page Horns with Beacons. - Accessories... - Specifications... - Approximate Dimensions... - Standards Compliance UL CSA C. No. EN/IEC - EN/IEC -- EN -- EN -- Certifications culus Listed (File No. S, Guides UCST, UCST) CE Marked B D A A A Range A Industrial Horn Range C Industrial Horn Range E Industrial Horn a Product Type Industrial horn, grey housing b Voltage...V DC V AC / Hz V AC / Hz V AC / Hz A B C D E c Horn Type db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) D d Mount Option Standard base for surface or on-the-wall mounting with conduit openings and hole plugs Sound Output Supply Voltage Cat. No. db max. at m,...v DC H-BDAD circuit DC, circuit AC, selectable tones V AC, / Hz H-BAAD db max. at m, circuit AC or DC, selectable tones db max. at m, circuit AC or DC, selectable tones db max. at m, circuit AC or DC, selectable tones db max. at m, circuit AC or DC, selectable tones...v DC V AC, / Hz...V DC V AC, / Hz...V DC V AC, / Hz...V DC V AC, / Hz H-BDBD H-BABD H-BDCD H-BACD H-BDDD H-BADD H-BDED H-BAED - Publication A-CAA-EN-P

17 Bulletin H High-Performance Horns Product Selection High-Performance Electronic Horns with Attached Strobe Beacons H BC D E D R a b c d e f BC D D A A A Range A Horn with Beacon Range C Horn with Beacon Range E Horn with Beacon a Product Type Electronic horn with Xenon strobe beacon, grey housing b Voltage V DC V DC V AC / Hz V AC / Hz V AC / Hz A B C D E D c Horn Type db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) db, tone, -stage (DC) db, tone, -stage (AC) d Mount Option Standard base for surface or on-the-wall mounting with conduit openings and hole plugs R e Illuminated Function J strobe Lens Color Clear Yellow f Publication A-CAA-EN-P -

18 Bulletin H High-Performance Horns Product Selection/Accessories Sound Output Voltage Beacon Lens Color Cat. No. db max. at m, circuit DC, circuit AC, selectable tones db max. at m, circuit AC or DC, selectable tones db max. at m, circuit AC or DC, selectable tones db max. at m, circuit AC or DC, selectable tones db max. at m, circuit AC or DC, selectable tones V DC V AC, / Hz V DC V AC, / Hz V DC V AC, / Hz V DC V AC, / Hz V DC V AC, / Hz H-BCDADR H-BCDADR H-BCDADR H-BCAADR H-BCAADR H-BCAADR H-BCDBDR H-BCDBDR H-BCDBDR H-BCABDR H-BCABDR H-BCABDR H-BCDCDR H-BCDCDR H-BCDCDR H-BCACDR H-BCACDR H-BCACDR H-BCDDDR H-BCDDDR H-BCDDDR H-BCADDR H-BCADDR H-BCADDR H-BCDEDR H-BCDEDR H-BCDEDR H-BCAEDR H-BCAEDR H-BCAEDR Accessories M Hole Plug Replacement Kit Cat. No. H-AHPK Type Cat. No. Range A, B, and Beacon Light H-AGKBAB Gasket Set Replacement Kit Range C Horn H-AGKC Range D Horn H-AGKD Cat. No. H-AGKBAB Range E Horn H-AGKE Color Cat. No. Replacement Beacon Light Lens Clear Yellow B-ABLR B-ABLG B-ABLA B-ABLB B-ABLC B-ABLY - Publication A-CAA-EN-P

19 Bulletin H High-Performance Horns Specifications Industrial Electronic Horns and Horns with Strobe Beacons Mechanical Ratings Shock and Vibration Listed below are reference guidelines for maximum shock and vibration standards for the H. Shock Vibration Range A Horn G Peak G Peak Range B Horn G Peak G Peak Range C Horn G Peak G Peak Range D Horn G Peak G Peak Range E Horn G Peak G Peak Range A Horn with Strobe Beacon G Peak G Peak Range B Horn with Strobe Beacon G Peak G Peak Range C Horn with Strobe Beacon G Peak G Peak Range D Horn with Strobe Beacon G Peak G Peak Range E Horn with Strobe Beacon G Peak G Peak Environmental Ratings Ingress Ratings Electronic Horns UL Type /R, IP Horn with Beacon UL Type, IP Operating Storage Temperature Ranges Electronic Horns + F ( + C) + F ( + C) Horns with Beacons + F ( + C) + F ( + C) Materials Horn Cover and Base ABS Beacon Housing Polycarbonate Beacon Lens Polycarbonate Gasket (Cover to Base) Nitrile Gasket (Enclosure back to wall) Nitrile Gasket (Horn to Beacon) Nitrile Gasket (Screw Mounting Hole) Fiber Performance Ratings Sound Output Range A Horn db meter Range B Horn db meter Range C Horn db meter Range D Horn db meter Range E Horn db meter Xenon Lamp Rating Strobe Beacon Joule Output All Horns All Horns with Strobe Beacon V DC (+/-%) Operating Voltage DC Voltage...V DC V DC (+/-%) Current Consumption V AC / Hz (+/-%) V AC / Hz (+/-%) AC Voltage V AC / Hz (+/-%) V AC / Hz (+/-%) V AC / Hz (+/-%) V AC / Hz (+/-%) Horns Range A Range B Range C RangeD Range E...V DC ma ma ma ma ma V AC / Hz ma ma ma ma ma V AC / Hz ma ma ma ma ma V AC / Hz ma ma ma ma ma Horns with Strobe Beacon V DC ma ma ma ma ma V DC ma ma ma ma ma V AC ma ma ma ma ma V AC ma ma ma ma ma V AC ma ma ma ma ma Flashing Frequency Strobe Beacon Hz Publication A-CAA-EN-P -

20 Bulletin H High-Performance Horns Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Horns Range A&B Range C Range D Range E Horns with Beacons Range A&B Range C Range D Range E - Publication A-CAA-EN-P

21 Bulletin B Mini Square Beacons Product Selection Bulletin B Mini Square Beacons High-intensity, Joule Xenon strobe beacon UL Type /R, IP Standards Compliance UL UL CSA C. No. EN/IEC - EN/IEC -- EN -- EN -- CAN/ULC-S-M Certifications culus Listed (File No. E, Guides UEES, UEES) CE Marked Table of Contents Product Selection... this page Specifications... - Approximate Dimensions... - Mini square Joule strobe beacons for general signaling applications. Bases accept conduit connections in side and back of enclosure. B G MS R a b c d e G MS a Housing/Color Grey b Beacon Type Mini-square beacon Mini Square Strobe Beacon Voltage V AC/DC V AC / Hz V AC / Hz c d Illumination Type R J strobe e Lens Color Clear Yellow Supply Voltage Lens Color Cat. No. V AC/DC B-GMSR V AC, / Hz B-GMSR V AC/DC B-GMSR V AC, / Hz B-GMSR V AC/DC B-GMSR V AC, / Hz B-GMSR V AC/DC B-GMSR V AC, / Hz B-GMSR V AC/DC B-GMSR Clear V AC, / Hz B-GMSR V AC/DC B-GMSR Yellow V AC, / Hz B-GMSR Publication A-CAA-EN-P -

22 Bulletin B Mini Square Beacons Accessories/Specifications/Approximate Dimensions Accessories Color Cat. No. B-ABLR B-ABLG Replacement Beacon Light Lens B-ABLA B-ABLB Clear B-ABLC Yellow B-ABLY Specifications Mechanical Ratings Listed below are reference guidelines for maximum shock and vibration standards for the Shock and Vibration Bul. B beacon lights. Shock Vibration All Strobe Beacons G Peak G Peak Environmental Ratings Ingress Ratings UL Type /R, IP Operating Temperature Ratings All Strobe Beacons - + F (- + C) Materials Housing and Lens Polycarbonate Gaskets Nitrile All Strobe Beacons All Strobe Beacons Performance Ratings Operating Voltage V AC/DC V (+/-%) Current Consumption Xenon Lamp Rating Joule V AC / Hz (+/-%) V AC / Hz. (+/- %) V AC/DC V AC V AC All Strobe Beacons ma/ ma ma ma Flashing Frequency All Strobe Beacons Hz Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Mini Square Beacon (.) - Publication A-CAA-EN-P

23 Bulletin BS/BM/BL Round Beacons Product Selection Bulletin BS, BM, BL Industrial Round Beacons Six colors available LED illumination functions: - Single-color LED with user-selectable steady burning or flashing function - Three-color LED (red, green, amber) - LED Strobe with user-selectable single or double flash - Halogen functions: steady, flashing, or rotating - Xenon function: strobe Surface, NPT conduit, or tube mounting options UL Type /X/, IP Table of Contents mm Beacons... this page mm Beacons... - mm Beacons... - Accessories... - Specifications... - Approx. Dimensions. - Standards Compliance UL EN/IEC - EN/IEC -- CSA. No. Certifications culus Listed (File No. E, Guides NKCR, NKCR) CE Marked Product Selection Bulletin BS mm Beacons a Base Type S Surface mount N / in. NPT conduit mount T mm tube mount b Voltage V AC/DC V AC/DC V AC V AC /V AC/DC /V AC/DC BS S RH DH FH RH BR SL ML BL a b c d c Function Steady halogen Flashing halogen Rotating halogen Xenon tube strobe LED single color selectable steady/flash LED three color LED strobe selectable single/double flash LED/Lens Color, red, amber d Clear Yellow Surface mount base must be installed with rough wall plate for UL Type /X/ rating, otherwise UL Type only. Not available in V AC/DC. mm tube mount is UL Recognized, other mounting types are UL Listed. SL function uses ( V AC/ V DC) and ( V AC/DC) voltage codes only. ML function uses,, and voltage codes only. BL function uses ( V AC/ V DC),, and voltage codes only.,, color combination is only valid for the three color LED selection (ML). Publication A-CAA-EN-P -

24 Bulletin BS/BM/BL Round Beacons Product Selection mm Beacons Base Type Voltage Function Color Cat. No. Surface Mount / in. NPT Conduit Mount V AC/DC V AC V AC/DC V AC Steady Halogen Rotating Halogen Xenon Strobe Steady Halogen Rotating Halogen Xenon Strobe Steady Halogen Rotating Halogen Xenon Strobe Steady Halogen Rotating Halogen Xenon Strobe BS-SDH BS-SDH BS-SRH BS-SRH BS-SBR BS-SBR BS-SDH BS-SDH BS-SRH BS-SRH BS-SBR BS-SBR BS-NDH BS-NDH BS-NRH BS-NRH BS-NBR BS-NBR BS-NDH BS-NDH BS-NRH BS-NRH BS-NBR BS-NBR mm LED Beacons Base Type Voltage Function Color Cat. No. BS-SSL /V AC/DC BS-SSL Single-Color LED BS-SSL BS-SSL /V AC/DC BS-SSL BS-SSL Surface Mount V AC/DC,, BS-SML Three-Color LED V AC,, BS-SML BS-SBL /V AC/DC BS-SBL Single/Double Strobe LED BS-SBL V AC BS-SBL BS-NSL /V AC/DC BS-NSL Single-Color LED BS-NSL BS-NSL /V AC/DC BS-NSL BS-NSL / in. NPT Conduit Mount V AC/DC,, BS-NML Three-Color LED V AC,, BS-NML BS-NBL /V AC/DC BS-NBL Single/Double Strobe LED BS-NBL V AC BS-NBL When used outdoors, surface mount base must be installed with rough wall plate for NEMA Type /X/ rating, otherwise NEMA Type only. - Publication A-CAA-EN-P

25 Bulletin BS/BM/BL Round Beacons Product Selection Bulletin BM mm Beacons S N T a Base Type Surface mount / in. NPT conduit mount mm tube mount BM S FH b Voltage V AC/DC V AC/DC V AC V AC a b c d DH FH RH BR c Function Steady halogen Flashing halogen Rotating halogen Xenon strobe When used outdoors surface mount base must be installed with rough wall plate for UL Type /X/ rating, otherwise UL Type only. Not available in V AC/DC. d Lens Color Clear Yellow Base Type Voltage Function Color Cat. No. Surface Mount / in. NPT Conduit Mount V AC/DC V AC V AC/DC V AC Steady Halogen Rotating Halogen Strobe Steady Halogen Rotating Halogen Strobe Steady Halogen Rotating Halogen Strobe Steady Halogen Rotating Halogen Strobe Clear Clear Clear Clear When used outdoors surface mount base must be installed with rough wall plate for UL Type /X/ rating, otherwise UL Type only. BM-SDH BM-SDH BM-SDH BM-SRH BM-SRH BM-SRH BM-SBR BM-SBR BM-SBR BM-SBR BM-SDH BM-SDH BM-SDH BM-SRH BM-SRH BM-SRH BM-SBR BM-SBR BM-SBR BM-SBR BM-NDH BM-NDH BM-NDH BM-NRH BM-NRH BM-NRH BM-NBR BM-NBR BM-NBR BM-NBR BM-NDH BM-NDH BM-NDH BM-NRH BM-NRH BM-NRH BM-NBR BM-NBR BM-NBR BM-NBR Publication A-CAA-EN-P -

26 Bulletin BS/BM/BL Round Beacons Product Selection Bulletin BL mm Beacons S N T a Base Type Surface mount in. NPT conduit mount mm tube mount BL N DH b Voltage V AC/DC V AC/DC V AC V AC a b c d DH FH RH BR c Function Steady halogen Flashing halogen Rotating halogen Xenon strobe When used outdoors surface mount base must be installed with rough wall plate for UL Type /X/ rating, otherwise UL Type only. Not available in V AC/DC. d Lens Color Clear Yellow Base Type Voltage Function Color Cat. No. Surface Mount in. NPT Conduit Mount V AC/DC V AC V AC/DC V AC Steady Halogen Rotating Halogen Strobe Steady Halogen Rotating Halogen Strobe Steady Halogen Rotating Halogen Strobe Steady Halogen Rotating Halogen Strobe Clear Clear Clear Clear BL-SDH BL-SDH BL-SDH BL-SRH BL-SRH BL-SRH BL-SBR BL-SBR BL-SBR BL-SBR BL-SDH BL-SDH BL-SDH BL-SRH BL-SRH BL-SRH BL-SBR BL-SBR BL-SBR BL-SBR BL-NDH BL-NDH BL-NDH BL-NRH BL-NRH BL-NRH BL-NBR BL-NBR BL-NBR BL-NBR BL-NDH BL-NDH BL-NDH BL-NRH BL-NRH BL-NRH BL-NBR BL-NBR BL-NBR BL-NBR - Publication A-CAA-EN-P

27 Bulletin BS/BM/BL Round Beacons Accessories Lamps B M LH a b c S M L Lenses a Size mm mm mm b Function LH Halogen B L AFL a b c c Voltage V AC/DC V AC/DC V AC V AC S M L a Size mm mm mm Smooth lens for rotating function only. Fresnel lens not for use with LED beacons. LED lens for mm only. ASL AFL ALL b Function Replacement smooth lens Replacement Fresnel lens Replacement LED lens c Lens Color Clear Yellow Power Module Assemblies S M L a Size mm mm mm B L ARA a b c b Function ARA Replacement rotating power module ADA Replacement steady power module AFA Replacement flashing power module ABA Replacement strobe power module c Voltage V AC/DC V AC/DC V AC V AC Miscellaneous Accessories and Replacement Parts S M L a Size mm mm mm B M LS Required for UL Type /X/ rating when using surface mount base outdoors. When used outdoors surface mount base must be installed with rough wall plate for UL Type /X/ rating, otherwise UL Type only. b a Function ALSG Lens gaskets (bag of ) AMM Magnetic mount ASFG Surface mount gaskets (bag of ) AMTG Metric tube gaskets (bag of ) AWP AVM LS ABS ABN ABT Rough wall plate Vertical bracket b Strobe tube ( mm or mm only) Surface mount base NPT conduit mount base Tube mount base Publication A-CAA-EN-P -

28 Bulletin BS/BM/BL Round Beacons Accessories mm mm mm Replacement Lamps Voltage Cat. No. Cat. No. Cat. No. Xenon strobe tube BM-LS BL-LS Halogen for steady burning, flashing, and rotating illumination functions V AC/DC BS-LH BM-LH BL-LH V AC/DC BS-LH BM-LH BL-LH V AC BS-LH BM-LH BL-LH V AC BS-LH BM-LH BL-LH Replacement Lenses Lens Color Cat. No. Cat. No. Cat. No. BS-ASL BM-ASL BL-ASL BS-ASL BM-ASL BL-ASL BS-ASL BM-ASL BL-ASL Smooth lens for rotating beacon only BS-ASL BM-ASL BL-ASL Clear BS-ASL BM-ASL BL-ASL Yellow BS-ASL BM-ASL BL-ASL Fresnel lens for steady and flashing halogen and xenon strobe functions (not for use in LED beacons) BS-AFL BM-AFL BL-AFL BS-AFL BM-AFL BL-AFL BS-AFL BM-AFL BL-AFL BS-AFL BM-AFL BL-AFL Clear BS-AFL BM-AFL BL-AFL Yellow BS-AFL BM-AFL BL-AFL BS-ALL BS-ALL LED lens for mm beacons only BS-ALL BS-ALL Clear BS-ALL Yellow BS-ALL Power Modules Voltage Cat. No. Cat. No. Cat. No. V AC/DC BS-ARA BM-ARA BL-ARA V AC/DC BS-ARA BM-ARA BL-ARA Rotating power module V AC BS-ARA BM-ARA BL-ARA Steady power module Flashing power module Strobe power module All power modules include a lamp. V AC BS-ARA BM-ARA BL-ARA V AC/DC BS-ADA BM-ADA BL-ADA V AC/DC BS-ADA BM-ADA BL-ADA V AC BS-ADA BM-ADA BL-ADA V AC BS-ADA BM-ADA BL-ADA V AC/DC BS-AFA BM-AFA BL-AFA V AC/DC BS-AFA BM-AFA BL-AFA V AC BS-AFA BM-AFA BL-AFA V AC BS-AFA BM-AFA BL-AFA V AC/DC BS-ABA BM-ABA BL-ABA V AC BS-ABA BM-ABA BL-ABA V AC BS-ABA BM-ABA BL-ABA - Publication A-CAA-EN-P

29 Bulletin BS/BM/BL Round Beacons Accessories mm mm mm Replacement Bases Cat. No. Cat. No. Cat. No. Surface mount base BS-ABS BM-ABS BL-ABS / in. NPT conduit mount base BS-ABN BM-ABN BL-ABN Tube mount base BS-ABT BM-ABT BL-ABT Miscellaneous Accessories and Replacement Parts Cat. No. Cat. No. Cat. No. Lens gasket (must order in multiples of ) BS-ALSG BM-ALSG BL-ALSG Surface mount gaskets (must order in multiples of ) BS-ASFG BM-ASFG BL-ASFG Tube mount gaskets (must order in multiples of ) BM-AMTG BM-AMTG BL-AMTG Magnetic mount BS-AMM BM-AMM BL-AMM Rough wall plate BS-AWP BM-AWP BL-AWP Vertical bracket BS-AVM BM-AVM BL-AVM Screws and washers for rough wall plate and magnetic mount BS-ASCW BM-ASCW Bonding kit (required for bonding between conduit connections) BM-ABK When used outdoors surface mount base must be installed with rough wall plate for UL Type /X/ rating. Required for UL Type /X/ rating when using surface mount base outdoors. Publication A-CAA-EN-P -

30 Bulletin BS/BM/BL Round Beacons Specifications Specifications Base material Lenses (all) Housing Pole mount base Bracket Protection class Terminals ( mm and mm only) Operation temperature range Storage temperature range Mounting Technical Polycarbonate Polycarbonate, red, amber, yellow, green, blue, and clear mm: polycarbonate mm and mm: aluminum die cast, powder-coated Powder-coated steel Type /X/ (surface mount base must be installed with rough wall plate for Type /X/ rating), IP up to. mm ( AWG) - + C (- + F); - + C (- + F), & mm steady halogen, and /V AC single-color LED - + C (- F) Horizontal surfaces: indoor direct to the surface, outdoor with additional metal plate between surface and base part Vertical surfaces: with bracket, for indoor and outdoor Tube or NPT conduit mounting: for indoor and outdoor Electrical and Mechanical Steady Halogen Flashing Halogen Strobe Rotating Light mm mm mm mm mm mm mm mm mm mm mm mm Halogen bulb W W W W W W W W W Bulb socket GY. GY. GY. GY. GY. GY. GY. GY. GY. Strobe energy J J J Xenon strobe tube Helical Helical Helical Strobe tube socket Terminals Terminals Terminals Flashing/Strobe frequency Hz Hz Hz Hz Hz Hz Rotating speed - selectable via jumper wire V AC/DC A. A. A. A A. A. A. A. A V AC/DC. A. A. A. A. A. A. A. A. A. A. A. A Nominal /V AC Current / Hz. A. A. A. A. A. A. A. A. A. A. A. A /V AC Hz. A. A. A. A. A. A. A. A. A. A. A. A Weight (Surface Mount) g g g g g g g g g g g g Weight (Tube Mount) g g g g g g g g g g g g Nominal Current Electrical and Mechanical Single-Color LED Three-Color LED mm Strobe LED V AC/DC ma /V AC / Hz ma ma /V AC Hz ma ma /V AC/DC / Hz /V AC Weight (Surface Mount) Weight (Tube Mount) ma ( V AC/ V DC) ma ( V AC) ma ( V AC/ V DC) g g / rpm / rpm / rpm - Publication A-CAA-EN-P

31 Bulletin BS/BM/BL Round Beacons Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. mm Beacon NPT Conduit Mount mm Beacon Surface Mount mm Beacon Tube Mount (.) (.) (.) (.) (.) (.) Ø (.) Ø (.) Ø Ø (.) / in. NPT Ø (.) Ø. (.) mm Beacon Vertical Bracket mm LED Beacon (.) (.) (.) Ø (.) (.) (.) Ø. (.) (.) (.) Publication A-CAA-EN-P -

32 Bulletin BS/BM/BL Round Beacons Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. mm Beacon NPT Conduit Mount mm Beacon Tube Mount mm Beacon Surface Mount / in. NPT mm Beacon Vertical Bracket - Publication A-CAA-EN-P

33 Bulletin BS/BM/BL Round Beacons Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. mm Beacon NPT Mount mm Beacon Surface Mount mm Beacon Tube Mount in. NPT mm Beacon Vertical Bracket Publication A-CAA-EN-P -

34 Bulletin W, D, F, E, T Signal and Control Tower Lights Product Overview Type Bulletin D E T W Environmental Ratings Ease of Assembly, Base Wiring and Lamp Changes Illumination Types Lens Colors Pole-Mount Base Options Other Base Mounting Options Compact Control Tower Lights mm UL Type /X/, IP Indoor and outdoor use No assembly required - all towers are assembled, wired, and tested at the factory LED, red, amber, blue, yellow, clear Surface, cm metric tube, and cm metric tube Vertical bracket, conduit adapter, and quick-release base Control Tower Lights mm UL Type /X/, IP on all bases, lights and caps sound modules Indoor and outdoor use No-tools assembly and maintenance, Twist-off lenses for easy lamp changes, topmounted terminal block for easy base wiring Incandescent, socket-mount LED, or strobe, red, amber, blue, yellow, clear,,,, and cm bases Surface-mount bases (surfacemount bases also feature / NPT, PG, and M threading options), vertical-mount bases, and quickrelease bases Control Tower Lights mm UL Type /X/, IP on all bases, lights piezo style sound and caps (sound and light with sound combo modules are IP) Indoor and outdoor use No-tools assembly and maintenance, Twist-off lenses for easy lamp changes, topmounted terminal block for easy base wiring Incandescent, socket-mount LED, or strobe, red, amber, blue, yellow, clear,,,, and cm aluminium or stainless steel bases Wall Mount Signal Lights UL Type /X/, IP Indoor and outdoor use No assembly required - all towers are assembled and tested at the factory LED, red, amber, blue, yellow, clear Surface-mount bases (surfacemount bases also feature / NPT, PG, and M threading options) Can be mounted in any orientation vertical-mount bases, and quick-release bases Housing Colors Black or grey base housing Black or grey base housing Black or grey base housing Grey or chrome cover housing Sound Options Piezo-style sound modules in single and two tone Piezo-style sound modules in single and two tone Connectivity Standard connectivity Standard connectivity Voltage Options Pole Connection Box Standards Operating Temperature Material Product Selection Bases available in: V AC/DC, V AC, V AC as standard offerings culus Listed, CE - + C (- + F) Polycarbonate - bases, cap, lens cover, sound module housing, lens, & lamp socket All modules available in: V AC/DC, V AC/DC, V AC, V AC as standard offerings Surface, vertical, and magnetic mount culus Listed and CE on all components - + C (- + F) Polycarbonate (no sound module) - bases, cap, lens cover, lens, & lamp socket Transducer-style or Piezo-style sound modules available in single or two tone (sound modules are UL Type, IP), Piezo styles and modules also available in /X Standard or DeviceNet connectivity All modules available in: V AC/DC, V AC/DC, V AC, V AC as standard offerings Surface, vertical, and magnetic mount culus Listed and CE on all components - + C (- + F) Polycarbonate - bases, cap, lens cover, sound module housing, lens, & lamp socket Piezo-style sound module (continuous or pulsing) Standard connectivity Base plate available in: V AC/DC, V AC, V AC as standard offerings culus Listed, CE - + C (- + F) Polycarbonate - base and lenses ABS - cover Page - Page - Page - Page - - Publication A-CAA-EN-P

35 Bulletin D mm Compact Control Tower Stack Lights Product Selection Bulletin D mm Compact Control Tower Lights UL Type /X/, IP Steady and flashing LED light modules Continuous or pulsing piezo sound modules Mounting options include: surface mount, pole with foot, metric tube, and direct mount Pre-Assembled and Pre-wired Tower Lights, One to Five Modules Table of Contents Product Selection... this page Accessories... - Specifications... - Approximate Dimensions... - Standards Compliance UL CSA C. No. EN/IEC - EN/IEC -- Certifications culus Listed (File No. E, Guides NKCR, NKCR) Level Level Level Level Level Surface Mount cm Pole Mount with Foot Threaded Tube for Direct Mount cm Threaded Tube for Direct Mount Vertical Mount to Cable using D-ABVM Conduit Mount using D-ACMK Vertical Mount to Conduit using D-ABVM D P SC B Y Y Y L P P P P T T T Q Q Blank a b c d e f g f g f g f g f g a Base Type Surface mount cm aluminum pole mount with foot cm aluminum pole mount with foot cm M metric threaded tube for direct mount cm M metric threaded tube for direct mount cm M metric threaded tube for direct mount cm quick release mount pole cm quick release mount pole b Network Option No network option SC Blank B G Sound module types (C, P, Q) must be on the top-most level, they must be configured with Lens Color/Sound, and only one sound module is allowed per assembly. Light module types (Y, L) can only be configured with Lens Color/Sound s,,,,, or. If the dual circuit sound module (Q) is selected, the maximum number of light modules allowed is three (two circuits are required for the dual circuit sound module). The SC cable must be ordered for all bases, except the Q and Q bases. (Level, f+g) (Level, f+g) (Level, f+g) (Level, f+g) (Level, f+g) c Cable Connector and Length Stranded cable, m, yellow jacket No cable (only for Q or Q base types) d Housing Color Black Grey e Voltage V AC/DC V AC V AC Y L C P Q f Module Type Steady LED Flashing LED Piezo sound alarm, continuous tone Piezo sound alarm, pulsing tone Dual-circuit Piezo sound alarm g Lens Color/Sound Sound module Clear Yellow Publication A-CAA-EN-P -

36 Bulletin D mm Compact Control Tower Stack Lights Accessories M Cat. No. Ø. / in. NPT Gaskets Vertical Mount Kit includes the following: L-bracket thread adapter black cable gland (/ in. NPT) plastic washer D-ABVM M Conduit Mount Kit M to / in. NPT thread adapter D-ACMK / in. NPT Direct Mount Kit includes the following: M nut plastic washer metal lock washer D-ARDM Base Foot Gasket (Bag of ) D-APFG Mounting Screw Washer Kit Replacement flat washers are used to provide a seal where the mounting screw meets the pole base. ( kit includes pieces) T-AMSG Field-installable -pin DC Micro style terminal chamber. For additional chamber style terminals see the On-Machine Connectivity Catalog. A-TS-DM Color Cat. No. Locking ring for quick release base Black D-ABQLR Locking ring for quick release base Grey D-AGQLR Gasket for quick release base (order quantity of and receive bag of gaskets) D-AQG Mounting base with gasket D-AQMB - Publication A-CAA-EN-P

37 Specifications Shock and Vibration Standard Bases Ingress Ratings Temperature Ratings All Products Surface Mount Base or / cm Aluminum Pole Base Light Modules Sound Modules Surface, Pole, Vertical, Tube Mount Bases Operating Temperature Storage Temperature Bases, Caps, Lens Covers, Sound Module Housings Rubber Seals and Gaskets Pole (for aluminum pole assembly) Pole Base Footing (for aluminum pole base) Insulation Sleeve (for pole insulation) Mounting Screw Washers Bulletin D mm Compact Control Tower Stack Lights Mechanical Ratings Based on the weight and style of mounting; tower lights are subject to damage from shock and vibration. Listed below are reference guidelines for maximum acceptable conditions. Module Stack Module Stack Module Stack G Shock. G Vibration Environmental Ratings Materials G Shock. G Vibration IP/UL Type /X/ IP/UL Type /X/ IP/UL Type /X/ - + C (- + F) - + C (- + F) Polycarbonate Nitrile Rubber Aluminum Polycarbonate PVC Polyamide Specifications G Shock. G Vibration Estimated Light Output Light Modules Sound Modules LED Modules Sound Modules Performance Ratings Steady, Flashing, mcd Steady, Flashing, mcd Steady, Flashing, mcd Steady, Flashing, Yellow mcd Steady, Flashing, mcd Steady, Flashing, White mcd Operating Voltage V AC/DC V AC V AC V AC/DC (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) Lamp Life Ratings (Design Life) Average Life Under Static, No Vibration, Conditions V AC/DC V AC V AC hrs hrs Light Output values are calculated from the LED datasheet and show typical values of luminous density. These values are not exact because the knurling in the lens affects the light distribution and because the viewing angle of the LED which directly relates to the Cd output value, is not identical for all LEDs. Current Consumption V AC/DC V AC V AC Light Modules Steady or Flashing LED ma ma ma Piezo Style Sound Modules Single and Dual Circuit ma ma ma Flashing LED Modules Piezo Sound Module Flashing Frequency (Light Only Modules) Flashing frequency approximately Hz db Rating (Sound Modules) All db(a) ratings determined at a distance of meter from sound module db(a) (+ db/- db) Leakage Current Impact All light and sound modules are capable of absorbing up to ma of leakage current from solid-state outputs without module activation. Publication A-CAA-EN-P -

38 Bulletin D mm Compact Control Tower Stack Lights Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Pre-assembled Tower Lights (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) Ø (.) Surface Mount Ø (.) Ø (.) - cm Pole Mount with Foot - (. -.) Ø (.) Threaded Tube for Direct Mount (.) Ø - (. -.) - (. -.) (.) Ø - (. -.) - cm Threaded Tube for Direct Mount Vertical Mount to Cable using D-ABVM - (. -.) (.) (.) / inch NPT Conduit Mount using D-ACMK - (. -.) (.) (.) - (. -.) (.) Vertical Mount to / inch NPT Conduit using D-ABVM - Publication A-CAA-EN-P

39 Bulletin E mm Control Tower Stack Lights Product Overview/Product Selection Bulletin E mm Control Tower Lights UL Type /X/, IP Stacking configurations modules high No Tools lens assembly Surface, vertical, quick release, or pole mounting Top-mounted terminal blocks on all bases Standards Compliance UL CSA C. No. EN/IEC - EN/IEC -- Certifications culus Listed (File No. E, Guides NKCR, NKCR) CE Marked Table of Contents Light Modules... this page Sound Modules... - Bases... - Pre-Configured Tower Lights... - Accessories... - Specifications... - Approx. Dimensions. - Light Modules E FN a b c Flashing Incandescent Voltage V AC/DC (no-lamp module ) V AC/DC V AC/DC V AC V AC a XN DN FN TL GL BR b Light Module Type Steady no lamp Steady incandescent Flashing incandescent Steady socket - mount LED Flashing socket - mount LED Strobe c Lens Color Clear Yellow Can only be selected with module type XN, voltage code. Accepts socket mount LED and incandescent lamp types. Voltage Color Illumination Type Cat. No. V No-Lamp Module E-XN Steady Incandescent/LED E-XN Steady Incandescent E-DN Flashing Incandescent E-FN Steady LED E-TL Steady Incandescent E-DN V AC/DC Flashing Incandescent E-FN Strobe E-BR Steady Incandescent E-DN Flashing Incandescent E-FN Steady LED E-TL Steady Incandescent E-DN Flashing Incandescent E-FN Steady LED E-TL Steady Incandescent E-DN V AC Flashing Incandescent E-FN Strobe E-BR Steady Incandescent E-DN Flashing Incandescent E-FN Steady LED E-TL Publication A-CAA-EN-P -

40 Bulletin E mm Control Tower Stack Lights Product Selection Sound Modules Sound modules have continuous and pulsing tones. Maximum sound output is meter. A reduced volume setting is available by changing the position of the volume dipswitch, producing a sound output of meter. E B TA a b c Black Two-Tone Sound Module B G a Housing Color Black Grey b Voltage V AC/DC V AC/DC V AC V AC SA TA c Module Type Single circuit/single tone piezo style (continuous or pulsing tones modified by dip switch) Two circuit/two tone piezo style (continuous or pulsing tones modified by energizing one or two circuits of sound module) Voltage Housing Color Module Type Cat. No. V AC/DC Black Single Circuit/Single Tone E-BSA Two Circuit/Two Tone E-BTA Grey Single Circuit/Single Tone E-GSA Two Circuit/Two Tone E-GTA V AC Black Single Circuit/Single Tone E-BSA Two Circuit/Two Tone E-BTA Grey Single Circuit/Single Tone E-GSA Two Circuit/Two Tone E-GTA - Publication A-CAA-EN-P

41 Bulletin E mm Control Tower Stack Lights Product Selection Standard Stack Light Bases Bases Surface-Mount Base with Cap Vertical-Mount Base with Cap Pole-Mount Bases Quick-Release Base B G a Housing Color Black Grey Quick-release bases always include a cap. E B VM C CB RB SB TM VM PM PM PM PM PM MM MM MM a b c b Base Type Surface mount with / in. NPT threading Surface mount with M metric threading Surface mount with PG threading mm tube mount Vertical mount cm aluminum pole mount base cm aluminum pole mount base cm aluminum pole mount base cm aluminum pole mount base cm aluminum pole mount base cm quick release base cm quick release base cm quick release base Blank C c Cap Option No cap Cap included Housing Color Black With Cap Option Without Cap Option Base Type Cat. No. Cat. No. Surface Mount / NPT Thread E-BCBC E-BCB Surface Mount PG Thread E-BSBC E-BSB Surface Mount M Thread E-BRBC E-BRB Vertical Mount E-BVMC E-BVM mm Diameter Tube Mount E-BTMC E-BTM cm Aluminum Pole Mount E-BPMC E-BPM cm Aluminum Pole Mount E-BPMC E-BPM cm Aluminum Pole Mount E-BPMC E-BPM cm Aluminum Pole Mount E-BPMC E-BPM cm Aluminum Pole Mount E-BPMC E-BPM cm Pole, Quick-Release Base E-BMMC cm Pole, Quick-Release Base E-BMMC cm Pole, Quick-Release Base E-BMMC Publication A-CAA-EN-P -

42 Bulletin E mm Control Tower Stack Lights Product Selection Pre-configured Tower Lights, One to Five Modules Level Level Level Level Level EC ES EV EM EP EE B G Surface Mount Vertical Mount cm Pole Mount cm Pole Mount EC B Y L B F Y a b c d e d e d e d e d e a Base Type Surface mount - / in. NPT threading Surface mount - PG Vertical mount mm tube mount cm pole mount cm pole mount b Base & Cap Color Black Grey (Level ) d+e (Level ) d+e c Voltage V AC/DC V AC/DC V AC V AC D F Y L B P Q d Module Type Steady incandescent Flashing incandescent Steady LED Flashing LED Strobe Single-circuit piezo sound module Two-circuit piezo sound module (Level ) d+e (Level ) d+e (Level ) d+e Lens Color Sound module e Clear Yellow Sound module option can only be selected with Module Type options P or Q in table e. They must be located in the top position of the stack. If the two-circuit sound module (option Q in Table d) is selected, the maximum number of light modules allowed is three. - Publication A-CAA-EN-P

43 Bulletin E mm Control Tower Stack Lights Specifications Shock and Vibration Surface Mount Base or cm Aluminum Pole Base Standard Bases Vertical Base or cm Aluminum Pole Base Recommended Wire Sizes Recommended Terminal Torque Ingress Ratings Temperature Ratings All Products Light Modules with Cap Sound Modules Surface, Vertical, Tube Mount Bases Pole Mount Bases Operating Temperature Storage Temperature Bases, Caps, Lens Covers, Sound Module Housings, Lenses Lamp Socket Rubber Seals and Gaskets Pole (for aluminum pole assembly) Pole Base Footing (for aluminum pole base) Insulation Sleeve (for pole insulation) Mounting Screw Washers Light Output Steady Incandescent Flashing Incandescent Mechanical Ratings Based on the weight and style of mounting; tower lights are subject to damage from shock and vibration. Listed below are reference guidelines for maximum acceptable conditions. Module Stack Module Stack Module Stack G Shock G Vibration G Shock. G Vibration Environmental Ratings Materials G Shock. G Vibration G Shock. G Vibration.. mm ( AWG). N m ( lb in) UL Type /X/, IP UL Type /X/, IP UL Type /X/, IP UL Type /X/, IP - + C (- + F) - + C (- + F) Polycarbonate Polycarbonate Nitrile Rubber Aluminum Polycarbonate Polyolefin Polypropylene G Shock. G Vibration G Shock. G Vibration Performance Ratings V AC/DC V AC/DC V AC V AC Strobe Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED White and Yellow. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens Joule per lamp mcd mcd mcd mcd mcd. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens Operating Voltage V AC/DC V AC/DC V AC V AC Light Modules and Sound Modules V AC/DC (± %) V AC/DC (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) Lamp Life Ratings (Design Life) Average Life Under Static, No Vibration, Conditions V AC/DC V AC/DC V AC V AC Incandescent Modules hrs hrs hrs hrs LED Modules hrs Strobe Modules hrs Sound Modules hrs First failures at about % of average life. Severe vibration may reduce life to % of average life. Flashing applications may reduce life to % of average life. Publication A-CAA-EN-P -

44 Bulletin E mm Control Tower Stack Lights Specifications/Approximate Dimensions Light Only Modules Sound Modules Current Consumption V AC/DC V AC/DC V AC V AC Steady Incandescent ma ma ma ma Flashing Incandescent ma ma ma ma Steady or Flashing LED ma ma ma ma Strobe ma ma ma ma Single-Tone Sound Module Two-Tone Sound Module Flashing Incandescent Modules Flashing LED Modules Strobe Modules Tone Frequency Tone Frequency ma ma ma ma Flashing Frequency (Light Only Modules) V module approximately. Hz V, V, and V modules approximately Hz Time ON/Time OFF = : Flashing frequency approximately. Hz Time On/Time OFF = : Flashing frequency appoxrimately Hz (flash duration /, secound) Flashing and Tone frequency (Light Modules/with Sound Set at Continuous Tone) Tone frequency is preset at Hz Flashing and Tone Pulsing Frequencies (Light Modules/with Sound Set at Pulsing Tone) Tone Frequency is preset at Hz db Rating (Sound Modules) All db(a) ratings determined at a distance of meter from sound module Single Tone Sound Module (SA) Maximum volume ranges from or db(a) (volume adjustable by dipswitch) Two Tone Sound Module (TA) Leakage Current Impact All light modules and sound modules are capable of absorbing up to ma of leakage from solid-state outputs without module activation Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing puroses.. (.) (.) Lens. (.) Cap. (.). (.). (.). (.) Light Modules Vertical Mount Base (.). (.) Sound Module (.) (.) Surface Mount Base. (). () (.) (.). (). () Quick Release Base Pole Mount Bases - Publication A-CAA-EN-P

45 Bulletin T mm Control Tower Stack Lights Product Overview/Product Selection Product Selection Light Modules B G a Housing Color Black Grey b Voltage V AC/DC (Use only with Module XN) V AC/DC V AC/DC V AC V AC Voltage Color Illumination Type V No-Lamp Module V AC/DC V AC Refer to configurator options for additional selections. Bulletin T mm Control Tower Stack Lights Surface, vertical, quick release, or pole mounting options Light modules - UL Type /X/, IP Sound modules - piezo and transducer options DeviceNet bases available Standards Compliance UL CSA C. No. EN/IEC - EN/IEC -- T B FN a b c d XN Use only with Voltage. Accepts LED module or incandescent lamp. Only available with Voltage s or, and Color s,, or. DN FN TL GL RL BR Black Housing Color Cat. No. Grey Housing Color Cat. No. T-BXN T-GXN Steady Incandescent/LED T-BXN T-GXN c Module Type Certifications culus Listed (File No. E, Guides NKCR, NKCR) CE Marked Steady no-lamp Steady incandescent Flashing incandescent Steady LED Flashing LED Rotating LED, simulated with fixed LEDs Strobe Table of Contents Light Modules... this page Combined Light Module with Sounder... - Sound Modules... - Stack Light Bases... - Pre-Assembled Stacks... - Accessories... - Specifications... - Approximate Dimensions... - Flashing Incandescent (Black Housing) Steady Incandescent T-BDN T-GDN Flashing Incandescent T-BFN T-GFN Steady LED T-BTL T-GTL Steady Incandescent T-BDN T-GDN Flashing Incandescent T-BFN T-GFN Strobe T-BBR T-GBR Steady Incandescent T-BDN T-GDN Flashing Incandescent T-BFN T-GFN Steady LED T-BTL T-GTL Steady Incandescent T-BDN T-GDN Flashing Incandescent T-BFN T-GFN Steady LED T-BTL T-GTL Steady Incandescent T-BDN T-GDN Flashing Incandescent T-BFN T-GFN Strobe T-BBR T-GBR Steady Incandescent T-BDN T-GDN Flashing Incandescent T-BFN T-GFN Steady LED T-BTL T-GTL d Light Color Clear Yellow Publication A-CAA-EN-P -

46 Bulletin T mm Control Tower Stack Lights Product Selection Single-Circuit Combined Light Module with Piezo Sounder All modules contain a selected light option with a sound device that operates simultaneously. The Piezo-style sound module can be switched to pulsing or continuous sound with a DIP switch. Additionally, the volume can be adjusted to either low: db(a) or high: db(a), via a DIP switch. UL Type /X/, IP. T B DC a b c d Two-Circuit Combined Light Module with Piezo Sounder All modules contain two circuits enabling separate operation of light or sound. The Piezo style sounder can be switched to pulsing or continuous, with a DIP switch. Additionally, the volume can be adjusted to either low: db(a) or high: db(a), via a DIP switch. UL Type /X/, IP. Combination Module B G a Housing Color Black Grey b Voltage V AC/DC V AC/DC V AC V AC DC DD FC TC GC BC c Combined Module Type Steady incandescent with sound Two-circuit steady incandescent with sound Flashing incandescent with sound Steady LED with sound Flashing LED with sound Strobe with sound Voltage Illumination Type Lamp Color V AC/DC V AC V AC/DC V AC d Lens Color Clear Yellow Black Housing Color Cat. No. Grey Housing Color Cat. No. Steady Incandescent T-BDC T-GDC Steady LED T-BTC T-GTC Steady Incandescent T-BDC T-GDC Strobe T-BBC T-GBC Steady Incandescent T-BDC T-GDC Steady LED T-BTC T-GTC Steady Incandescent T-BDC T-GDC Steady LED T-BTC T-GTC Steady Incandescent T-BDC T-GDC Strobe T-BBC T-GBC Steady Incandescent T-BDC T-GDC Steady LED T-BTC T-GTC Steady Incandescent T-BDD T-GDD T-BDD T-GDD T-BDD T-GDD T-BDD T-GDD T-BDD T-GDD T-BDD T-GDD The single-circuit combined light/with sound module uses one circuit in a stack. It can be used with a maximum of four light modules and must be placed in the top position of a stack. Refer to configurator options for additional selections. The two-circuit combined light/with sound module uses two circuits in a stack. It can be used with a maximum of three light modules and must be placed in the top position of a stack. - Publication A-CAA-EN-P

47 Bulletin T mm Control Tower Stack Lights Product Selection Transducer-Style Sound Modules UL Type, IP Adjustable from meter Up to tones Adjustable frequency and speed tone T B SA a b c Sound Module B G a Housing Color Black Grey b Voltage V AC/DC V AC/DC V AC V AC SA TA c Module Type Single-tone sound module with different tones Dual-tone sound module with sets of dual-tone combinations Voltage Module Type Tone V AC/DC V AC Single Tone Transducer Style Dual Tone Transducer Style Single Tone Transducer Style Dual Tone Transducer Style Preset as Triangle Tone Preset as Triangle Tone/Continuous Tone Preset as Triangle Tone Preset as Triangle Tone/Continuous Tone Black Housing Color Cat. No. T-BSA T-BTA T-BSA T-BTA This module uses one circuit in a stack. It can be used with maximum of any four light modules and must be placed on top of stack. This module uses two circuits in a stack. It can be used with a maximum of any three light modules and must be placed on top of stack. Refer to configurator options for additional selections. Piezo-Style Sound Modules Single or dual circuit versions High/low volume selectable via DIP switch T G TA a b c Grey Housing Color Cat. No. T-GSA T-GTA T-GSA T-GTA Housing Color B Black G Grey a b Voltage V AC/DC V AC/DC V AC V AC SA TA SA TA c Module Type Single-tone/single-circuit piezo-style module with continuous or pulsing tones modified by a DIP switch Type Volume or m Dual-tone/dual-circuit piezo-style module with continuous or pulsing tone modified by energizing one or two circuits of sound modules Type Volume or m Single-circuit piezo-style module with continuous or pulsing tones modified by a DIP switch Type /X/ Volume or m Dual-circuit piezo-style module with continuous or pulsing tone modified by energizing one or two circuits of sound modules Type /X/ Volume or m Publication A-CAA-EN-P -

48 Bulletin T mm Control Tower Stack Lights Product Selection Voltage Module Type Tone Pattern V AC/DC V AC Refer to configurator options for additional selections. Dual Circuit Piezo Sounder (Type /X/, IP) Single Circuit Piezo Sounder (UL Type /X/, IP) Dual Circuit Piezo Sounder (Type /X/, IP) Single Circuit Piezo Sounder (UL Type /X/, IP) Pulsing or Continuous Tone Pulsing or Continuous Tone Black Housing Color Cat. No. T-BTA T-BSA T-BTA T-BSA Grey Housing Color Cat. No. T-GSA T-GSA T-GTA T-GSA Standard and DeviceNet Stack Light Bases Surface-Mount Base with Cap Vertical-Mount Base with Cap cm Aluminum Pole-Mount Base cm Quick Release Base cm Powder-Coated Stainless Steel Pole-Mount Base cm Powder-Coated Stainless Steel Pole-Mount Base with Cap Surface-Mount, Conduit-Mount Base with Stranded Wire Cable cm Pole-Mount Base with Micro-Connect Cable and Cap Vertical-Mount Base with Micro-Connect Cable and Cap - Publication A-CAA-EN-P

49 Bulletin T mm Control Tower Stack Lights Product Selection Blank DM DS DL B G a Network Connection Type No network connection DeviceNet micro-connect with m cable DeviceNet stranded wire connect with m cable DeviceNet mini-connect with m cable b Housing Color Black Grey T DL B PM C CB SB RB VM TM PM PM PM SPM SPM SPM SPM SPM MM MM MM a b c d c Base Type Surface mount / in. NPT conduit mount Surface mount PG conduit mount Surface mount M x. conduit mount Vertical mount mm diameter tube mount cm aluminum pole mount cm aluminum pole mount cm aluminum pole mount cm stainless steel pole mount cm stainless steel pole mount cm stainless steel pole mount cm stainless steel pole mount cm stainless steel pole mount cm quick release base cm quick release base cm quick release base Blank C d Cap Option No cap Cap included DeviceNet bases DL, DM, or DS can only be used with V AC/DC and they are only available with Base Types CB, SB, VM, TM, PM, or PM. Stainless Steel tube is powder-coated in black. Standard Stack Light Bases Housing Color Black Quick release bases always include a cap. Base Type With Cap Option Cat. No. Without Cap Option Cat. No. Surface Mount / in. NPT Conduit Mount T-BCBC T-BCB Surface Mount PG Conduit Mount T-BSBC T-BSB Surface Mount M x. Conduit Mount T-BRBC T-BRB Vertical Mount T-BVMC T-BVM cm Aluminum Pole Mount T-BPMC T-BPM cm Aluminum Pole Mount T-BPMC T-BPM cm Aluminum Pole Mount T-BPMC T-BPM mm Diameter Tube Mount T-BTMC T-BTM cm Stainless Steel Pole Mount T-BSPMC T-BSPM cm Stainless Steel Pole Mount T-BSPMC T-BSPM cm Stainless Steel Pole Mount T-BSPMC T-BSPM cm Stainless Steel Pole Mount T-BSPMC T-BSPM cm Stainless Steel Pole Mount T-BSPMC T-BSPM cm Pole, Quick-Release Base T-BMMC cm Pole, Quick-Release Base T-BMMC cm Pole, Quick-Release Base T-BMMC Publication A-CAA-EN-P -

50 Bulletin T mm Control Tower Stack Lights Product Selection DeviceNet Stack Light Bases Cable Type Base Type Cap Option Micro Connect (approx. m cable length) Stranded Wire (approx. m cable length) Mini Connect (approximately m cable length) Black Housing Color Cat. No. Grey Housing Color Cat. No. Surface Mount / in. NPT Conduit Mount T-DMBCBC T-DMGCBC Surface Mount PG Conduit Mount T-DMBSBC T-DMGSBC Vertical Mount T-DMBVMC T-DMGVMC cm Pole Mount T-DMBPMC T-DMGPMC cm Pole Mount T-DMBPMC T-DMGPMC mm Diameter Tube Mount T-DMBTMC T-DMGTMC Surface Mount / in. NPT Conduit Mount T-DSBCBC T-DSGCBC Surface Mount PG Conduit Mount T-DSBSBC T-DSGSBC Vertical Mount T-DSBVMC T-DSGVMC With Cap cm Pole Mount T-DSBPMC T-DSGPMC cm Pole Mount T-DSBPMC T-DSGPMC mm Diameter Tube Mount T-DSBTMC T-DSGTMC Surface Mount / in. NPT Conduit Mount T-DLBCBC T-DLGCBC Surface Mount PG Conduit Mount T-DLBSBC T-DLGSBC Vertical Mount T-DLBVMC T-DLGVMC cm Pole Mount T-DLBPMC T-DLGPMC cm Pole Mount T-DLBPMC T-DLGPMC mm Diameter Tube Mount T-DLBTMC T-DLGTMC See previous page for all configurator options. All DeviceNet bases can be purchased without cap. Remove the C from the end of the cat. no. Pre-Configured Control Tower Lights, One to Five Modules Level Level Level Level Level Surface Mount Vertical Mount cm Pole Mount cm Pole Mount - Publication A-CAA-EN-P

51 Bulletin T mm Control Tower Stack Lights Product Selection TS DL B Y L B F Y TC TS TV TP TE TM Blank DL DM DS B G a b c d e f e f e f e f e f a Base Type Surface mount / in. NPT conduit Surface mount PG conduit Vertical mount cm pole mount cm pole mount mm diameter tube mount b Network Options Standard DeviceNet mini-connect with m cable DeviceNet micro-connect with m cable DeviceNet stranded wire connect with m cable c Housing Color Black Grey (Level ) e+f d (Level ) e+f Voltage V AC/DC V AC/DC V AC V AC D F Y L B T H J E G Z A W P Q e Module Type Steady incandescent Flashing incandescent Steady LED Flashing LED Strobe Steady incandescent with sound Flashing incandescent with sound Dual-circuit steady incandescent with sound Steady LED with sound Flashing LED with sound Strobe with sound Transducer single-circuit sounder UL Type, IP Transducer dual-circuit sounder UL Type, IP Single-circuit piezo alarm Dual-circuit piezo alarm (Level ) e+f (Level ) e+f Lens Color Sound module Clear Yellow DeviceNet bases DL, DM, or DS can only be used with V AC/DC. Only one sound module or light module/with sound can be assembled per stack. These modules must always be placed in the top position. Sound module from Table f can only be selected with single-tone or two-tone module types from Table e. f (Level ) e+f Publication A-CAA-EN-P -

52 Bulletin T mm Control Tower Stack Lights Accessories Incandescent Lamps V AC/DC V AC/DC Cat. No. T-L T-L V AC T-L (BAd Bayonet) mm socket height V AC T-L LED Lamps for Socket-Mounted Modules Color Cat. No. E-LLR E-LLG V AC/DC E-LLA E-LLB Yellow E-LLY White E-LLW E-LLR E-LLG V AC/DC E-LLA E-LLB Yellow E-LLY White E-LLW E-LLR E-LLG V AC E-LLA E-LLB Yellow E-LLY White E-LLW E-LLR E-LLG V AC E-LLA E-LLB Yellow E-LLY White E-LLW Caps (top of stack) Color Cat. No. The cap is installed to the top of the uppermost light module. No cap is needed if the top module is a sound module, or a light/with sound module. For Use With E Only For Use With T Only Black Grey Black Grey E-ABCAP E-AGCAP T-ABCAP T-AGCAP Module Securing Screws (Bag of ) For Use With E Only E-ASC Gaskets Lens O-Ring Seal Replacement rubber O-rings are to be installed between all bases, light, sound, and light/with sound modules. (Must order multiples of ) For Use With E Only For Use With T Only E-ALSG T-ALSG Surface Mount Gasket Replacement flat gasket is to be placed between the mounting surface and the surface mount base. (Must order multiples of ) For Use With E Only SB, RB, & CB Bases For Use With T Only BSB & BCB Bases E-ASFG T-ASFG White LED lamps are to be used with a lens option of Clear. Pole Foot Gasket Replacement flat gasket is to be placed between the mounting surface and the pole base bottom foot. (Must order multiples of.) To be used with Cat. No. T-BPM, T-BPM, and T- BPM pole bases. T-APFG - Publication A-CAA-EN-P

53 Bulletin T mm Control Tower Stack Lights Accessories Gaskets Vertical Mount Gasket Replacement flat gasket is to be placed between the mounting surface and the vertical mount base. (Must order multiples of ) Tube Mount Gasket Replacement O-ring gasket is to be placed in the tube mount pole opening before the tube is installed (BTM- and GTMtype bases). (Must order multiples of ) Cat. No. T-AVFG T-AVTG Mounting Screw Washer Kit Replacement flat washers are used to provide a seal where the mounting screw meets the pole base. ( kit includes pieces) (Package quantity = ) Pole Connection Boxes Black surface mount with PG threaded side entrance Black surface mount with M threaded side entrance Black surface mount with / in. NPT threaded side entrance Black vertical mount with PG threaded side entrance Black vertical mount with M threaded side entrance Black magnetic mount with PG threaded side entrance Black magnetic mount with M threaded side entrance Black magnetic mount with / in. NPT threaded side entrance Hole Plugs Black PG threaded hole plug Black M threaded hole plug Glands Black PG threaded cable gland Black M threaded cable gland Black / in. NPT sealing connector Mounting Screws (M x screws) for mounting Pole Mount Base to Pole Connection Box (Order quantity of to receive bag of screws) T-AMSG T-BSMP T-BSMR T-BSMN T-BVMP T-BVMR T-BMMP T-BMMR T-BMMN T-ABUP T-ABUR T-ABCP T-ABCR T-ABHN T-AJBS Vertical Mount Kit Kit includes vertical bracket and set of three sealing washers. For use with E surface mount base. E-AVM Vertical Mount Kit Kit includes vertical bracket and set of three sealing washers. For use with T and E pole mount base and for use with T surface mount base. For use with Bul. E and T pole mount bases, except for stainless steel and quick release base types. T-AVM Publication A-CAA-EN-P -

54 Bulletin T mm Control Tower Stack Lights Specifications Shock and Vibration Surface Mount Base or cm Aluminum Pole Base Standard Bases Vertical Base or cm Aluminum Pole Base Surface Mount Base or cm Aluminum Pole Base DeviceNet Bases Vertical Base or cm Aluminum Pole Base Recommended Wire Sizes Recommended Terminal Torque Ingress Ratings Temperature Ratings All Products Light Output Steady Incandescent Flashing Incandescent Performance Ratings V AC/DC V AC/DC V AC V AC Strobe Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED Steady, Flashing Socket Mount LED White and Yellow Mechanical Ratings. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens Joules per lamp mcd mcd mcd mcd mcd. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens. MSCP. Lumens Operating Voltage V AC/DC V AC/DC V AC V AC Light Modules and Sound Modules V AC/DC (± %) V AC/DC (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) Lamp Life Ratings (Design Life) Average Life Under Static, No Vibration, Conditions V AC/DC V AC/DC V AC V AC Incandescent Modules, hrs, hrs, hrs, hrs LED Modules hrs Strobe Modules hrs Sound Modules hrs First failures at about % of average life. Severe vibration may reduce life to % of average life. Flashing applications may reduce life to % of average life. Based on the weight and style of mounting; tower lights are subject to damage from shock and vibration. Listed below are reference guidelines for maximum acceptable conditions. Module Stack Module Stack Module Stack G Shock G Vibration G Shock. G Vibration G Shock G Vibration G Shock. G Vibration Environmental Ratings G Shock. G Vibration G Shock. G Vibration G Shock. G Vibration G Shock. G Vibration.. mm ( AWG). N m ( lb in) Light Modules with Cap and combined Light/Sound Modules IP/UL Type /X/ Sound Modules (SA, SA, TA, TA) IP/UL Type Sound Modules (SA, TA) IP/UL Type /X/ Surface, Vertical, Tube Mount and On- Machine Bases IP/UL Type /X/ Pole Mount Bases (Aluminum) IP/UL Type / Pole Mount Bases (Stainless Steel) IP/UL Type /X/ Operating Temperature Storage Temperature Bases, Caps, Lens Covers, Sound Module Housings, Lenses, Lamp Sockets Rubber Seals and Gaskets Pole (for aluminum pole assembly) Pole Base Footing (for aluminum pole base) Pole (for stainless steel pole assembly) Pole Base Footing (for stainless steel pole base) Insulation Sleeve (for pole insulation) Surface and Vertical Mount Pole Connection Box and Magnetic Mount Housing Mounting Screw Washers DeviceNet Base Grommet DeviceNet Cable Jackets DeviceNet Cable Connectors Materials - + C (- + F) - + C (- + F) Polycarbonate Nitrile Rubber Aluminum Polycarbonate Powder-coated Stainless Steel Zinc Polyolefin Polycarbonate Polypropylene Neoprene CPR Chlorinated Polyethylene Santoprene G Shock. G Vibration G Shock. G Vibration G Shock. G Vibration G Shock. G Vibration - Publication A-CAA-EN-P

55 Bulletin T mm Control Tower Stack Lights Specifications Light Only Modules Light Modules/ with Sound Transducer Style Sound Modules Piezo Style Sound Modules Current Consumption V AC/DC V AC/DC V AC V AC Steady Incandescent ma ma ma ma Steady or Flashing LED ma ma ma ma Strobe ma ma ma ma Steady Incandescent/with Sound ma ma ma ma Flashing Incandescent/with Sound ma ma ma ma Steady or Flashing LED/with Sound (,, Yellow) ma ma. ma ma Flashing Incandescent/with Sound ma ma. ma ma Steady or Flashing LED/with Sound (,, White) ma ma ma ma Single and Two Circuit Modules ma ma V/ Hz V/ Hz ma V/ Hz V/ Hz ma Single and Two Circuit Modules ma ma ma ma DeviceNet Bases ma Flashing Frequency (Light Only Modules) Flashing Incandescent Modules Flashing LED Modules Strobe Modules Tone Frequency V module approximately. Hz V, V, and V modules approximately Hz Time ON/Time OFF = : Flashing frequency approximately. Hz Time ON/Time OFF = : Flashing frequency approximately Hz (flash duration /, second) Flashing and Tone Frequency (Light Modules/with Sound Set at Continuous Tone) Tone frequency is preset at Hz or Hz Flashing Incandescent/with Sound V module approximately. Hz V, V, and V modules approximately. Hz Flashing LED/with Sound Flashing frequency approximately. Hz Strobe/with Sound Flashing frequency approximately. Hz Flashing and Tone Pulsing Frequencies (Light Modules/with Sound Set at Pulsing Tone) Tone Frequency Tone frequency is preset at Hz or Hz Steady Incandescent/with Sound Sound Pulsing Frequency. Hz Flashing Incandescent/with Sound LED Steady/with Sound LED Flashing/with Sound Strobe/with Sound Selectable Tone Sound Module (SA, TA) Piezo Sound Module (SA, TA) Piezo Sound Module (SA, TA) Piezo Light Modules and Light Modules/with Sound (set at continuous or pulsing tone) Flashing and Pulsing Frequency the same for V module approximately. Hz, for V, V, and V modules approximately. Hz Sound Pulsing Frequency. Hz Flashing and Pulsing Frequency the same at. Hz Flashing and Pulsing Frequency the same at. Hz db Rating (Sound Modules) All db(a) ratings determined at a distance of meter from sound module Maximum volume ranges from db(a) (volume adjustable) Based on tone selected for all settings except signal horn which has a maximum of db(a) High db/low db, selectable via DIP switch High db/low db, selectable via DIP switch High db/low db, selectable via DIP switch Leakage Current Impact All light modules, sound modules, and light/sound modules are capable of absorbing up to ma of leakage current from solid-state outputs without module activation. Some light and light modules with sound may not turn off completely when connected to solid-state outputs which emit leakage current. Listed below are modules that were affected by an output module emitting a maximum of ma. A dry contact can be used to eliminate the effect of leakage current. V AC/DC, V AC/DC, V AC, V AC All light/sound combination modules DeviceNet Bases Baud Rate Options K, K, K, Autobaud Publication A-CAA-EN-P -

56 Bulletin T mm Control Tower Stack Lights Specifications Transducer Style Single Circuit Sound Module (SA) DIP Switch Position Tone Speed Upper Frequency Lower Frequency Triangle Tone Hz Hz Hz Continuous Tone Hz Volume db(a) db(a) Interrupted Tone Changing Tone.. Hz.. Hz Hz Hz Hz db(a) db(a) Adjustable Sound Settings Saw Tooth Tone Ascending Saw Tooth Tone Descending.. Hz.. Hz Hz Hz Hz Hz db(a) db(a) Sine Wave Tone DIN-Emergency Signal.. Hz Hz Hz DIN Hz Hz Hz db(a) db(a) Volume Lower Freq. Upper Freq. Speed Siren (Non- Repeating) Signal Horn Continuous Tone s Hz Hz Hz db(a) db(a) Three-Tone Gong s Hz Hz Hz db(a) Two-Tone Gong s Hz Hz db(a) Rotated View of Sound Settings Gong s Hz db(a) Set to maximum (+). - Publication A-CAA-EN-P

57 Bulletin T mm Control Tower Stack Lights Specifications Transducer Style Dual Circuit Sound Module (TA) DIP Switch Position Tone A Tone B Triangle Tone Continuous Tone Continuous Tone Interrupted Tone Continuous Tone Changing Tone Interrupted Tone Three-Tone Gong Interrupted Tone Siren (Non-Repeating) Changing Tone DIN-Emergency Signal DIN Adjustable Sound Settings Saw Tooth Tone Ascending Continuous Tone Saw Tooth Tone Descending Interrupted Tone Sine Wave Tone DIN-Emergency Signal DIN DIN-Emergency Signal DIN Three-Tone Gong Volume Lower Freq. Upper Freq. Speed Siren (Non-Repeating) Signal Horn (Continuous Tone) Triangle Tone Continuous Tone Three-Tone Gong Sine Wave Tone Two-Tone Gong Two-Tone Gong (Non-Repeating) Rotated View of Sound Settings Gong Continuous Tone Publication A-CAA-EN-P -

58 Bulletin T mm Control Tower Stack Lights Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Assembled Control Tower Lights Light Modules Only or Light Modules with Sound Module located on top position Surface Mount Base (SB and CB) Tube Mount Base (TM) Vertical Mount Base (VM) cm Pole Mount Base (PM, SPM) cm Pole Mount Base (PM, SPM) cm Pole Mount Base (PM, SPM) cm Pole Mount Base (SPM) cm Pole Mount Base (SPM) If a combined Light/Sound module is used, add. mm (. in.) to vertical dimensions. - Publication A-CAA-EN-P

59 Bulletin T mm Control Tower Stack Lights Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Component and Accessory Dimensions Light Module Combined Light/Sound Module Transducer Style Sound Module SA Sounder TA Sounder Pole Mount Base Aluminum or Stainless Steel A B D Cap C E Vertical Mount Base Pole Mount Base Size [cm] (aluminum or stainless steel) Dimension A. (.). (.). (.). (.). (.) Dimension B Dimension C Dimension D Dimension E. (.). (.). (.). (.) Surface Mount Base T-BSB or T-BCB PG Conduit or / in. NPT Conduit Thread Publication A-CAA-EN-P -

60 Bulletin T mm Control Tower Stack Lights Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. E-AVM Vertical Mount Bracket Standard Pole Connection Box [. ] [. ] [. ] Ø. [. ] X [. ] Ø [. ] [. ] [. ] [. ] Ø [. ] X [. ] T-AVM Vertical Mount Bracket Magnetic Pole Connection Box [. ] [. ] [. ] Ø. [. ] X Surface Mount Gasket Ø [. ] [. ] [. ] [. ] [. ] Ø [. ] X Pole Mount Gasket Ø. [. ] X FOR POLE FOOT MOUNTING Vertical Mount Gasket - Publication A-CAA-EN-P

61 Bulletin W Wall Mount Signal Light Product Overview/Catalog Number Explanation Bulletin W Wall Mount Signal Light UL Type /X/, IP Configurations from light levels, available with or without sound Steady and flashing LED light modules, V AC/DC, /V AC, and /V AC User-selectable, continuous, or pulsing piezo sound modules Six light colors to choose from Two housing colors (grey, chrome), available to match application needs Can be mounted in any orientation Table of Contents Product Selection... this page Specifications... - Approximate Dimensions... - Pre-Assembled Wall Mount Signal Lights, Two to Five Light Levels Level Level Level Level Level W G Y Y Y Y L P a b c d e d e d e d e d e f (Level, d+e) (Level, d+e) (Level, d+e) (Level, d+e) (Level, d+e) a c e Network Option Voltage Lens Color Blank No network option V AC/DC b Housing Color C Chrome plated G Grey V AC V AC d Module Type Y Steady LED L Flashing LED Clear Yellow Sound Blank No sound P Piezo sounder (continuous/pulsing) f Publication A-CAA-EN-P -

62 Bulletin W Wall Mount Signal Light Product Selection Housing Color Grey Chrome Voltage V AC/DC V AC V AC/DC V AC LED Module Steady Level Level Level Level Level LED Module LED Module LED Module LED Module Piezo Sound Module Color Color Color Color Color Cat. No. Steady W-GYYYP Flashing W-GYYLP W-GYYYP Clear W-GYYYP Steady Flashing W-GYYYLP Steady Yes Steady W-GYYYYP Clear Flashing W-GYYYLP Steady Clear W-GYYYYP W-GYYP Flashing W-GYLP W-GYY W-GYYY Steady No Steady W-GYYY Steady W-GYYYY Flashing W-GYYLP W-GYYYP Steady W-GYYYYP Steady Steady Flashing W-GYYYLP Yes Clear Steady W-GYYYYYP Steady Clear Flashing W-GYYYYLP W-GYYP Flashing W-GYLP W-GYY W-GYYY Steady No Steady W-GYYYY Steady Clear Steady W-GYYYYY Steady W-CYYYP W-CYYLP Flashing W-CYYLP Clear W-CYYLP Flashing W-CYYYLP Steady Steady Yes W-CYYYYP Clear Flashing W-CYYYLP Steady Clear W-CYYYYP Clear Steady Steady W-CYYYYYP Clear Flashing W-CYYYYLP W-CYYP Flashing Yes W-CYLP W-CYYY Steady Steady Steady Clear No W-CYYYY W-CYY Steady W-CYYP Yes Flashing W-CYLP W-CYY Steady No Steady W-CYYY - Publication A-CAA-EN-P

63 Bulletin W Wall Mount Signal Light Specifications/Approximate Dimensions Specifications Environmental Ratings Ingress Ratings Light/Sound IP/UL Type /X/ Temperature Ratings Operating Temperature - + C (- + F) Storage Temperature - + C (- + F) Materials Lenses and Base Polycarbonate (V-) Cover ABS Rubber Seals and Gaskets NBR Electrical Ratings V AC/DC V AC V AC Operating Voltage V AC/DC (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) V AC Hz (± %) Current Consumption Steady or Flashing LED ma per channel, max. ma per channel, max. ma per channel, max. Piezo Sounder ma ma ma Leakage Current Impact ma Mechanical Ratings Design Life Rating Steady or Flashing LED hrs (Average life under static, no vibration conditions) Piezo Sounder > hrs Frequency Flashing LED Hz db Rating Piezo Sounder dba (potentiometer adjustable down to db) All db(a) ratings determined at a distance of meter from sound module Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. D B E A C Number of Levels Dimension A Dimension B Dimension C Dimension D Dimension E. (.) (.). (.) (.) (.) (.) (.). (.) (.). (.) (.) Publication A-CAA-EN-P -

64 Bulletin X Hazardous Location Horns, Beacons, and Loudspeakers Product Overview Bulletin XH XB XC XL Type Alarm Horn Sounders Xenon Strobe Beacons Voltages Available V DC, V DC, V AC / Hz, V AC / Hz V DC, V DC, V DC, V AC / Hz, V AC / Hz Combined Horn Sounder and Strobe Beacon V DC, V DC, V AC / Hz, V AC / Hz Public Address Loudspeakers Illumination Type Strobe or Joule Strobe Joule Flash Rate Hz Lens Colors Available, green, amber, blue, yellow, clear, green, amber, blue, yellow, clear Environmental Rating NEMA Type /X/, IP/ Operating Temp Range - + F (- + C) Sound Output Level db db Horn Tones selectable tones, stages selectable tones, stages Cover, Base, and Beacon Housing Material Certifications PPS glass-filled plastic PPS glass-filled plastic Beacon Lens: Glass PPS glass-filled plastic Beacon Lens: Glass PPS glass-filled plastic culus Listed, CE Marked Product Selection Page - Page - Page - Page - - Publication A-CAA-EN-P

65 Bulletin X Hazardous Location Horns, Beacons, and Loudspeakers Product Selection Alarm Horn Sounders BN a Product Type / in. NPT conduit entrance, black housing Bulletin X Hazardous Location Horns, Beacons, and Loudspeakers NEMA Type /X/, IP Glass Reinforced Plastic (GRP) and impact resistant ABS Easy to install with fully adjustable ( ) mounting bracket at increments / in. NPT conduit entry and pre-wired with flying leads Electronic horns provide extremely low power consumption and long life Functions include: Electronic horn sounder, multi-tone and multi-stage Xenon strobe beacon Combined electronic horn with Xenon strobe Public address loudspeaker Certifications CE Marked culus Listed (File No. E for Beacons and File No. E for Horns and Combination units) for Class I, Division, Groups A, B, C and D; Class II, Division, Groups F & G, and Class III, Division & XH BN D B D D A A a b c b Voltage...V DC V DC...V AC...V AC A B Table of Contents Alarm Horn Sounders... this page Xenon Strobe Beacons... this page Combined Horn Sounder & Strobe Beacon... - Public Address Loudspeakers... - Specifications... - Approximate Dimensions... - Standards Compliance UL UL CSA C. No. CSA C. No. EN/IEC - EN/IEC -- c Horn Type m/ tone/ stage m/ tone/ stage Xenon Strobe Beacons BN a Product Type Supply Voltage Beacon Type Lens Color Cat. No. V DC V AC Supply Voltage Sound Output Cat. No....V DC...V AC / in. NPT conduit entrance, black housing XB BN A B D D D A A b Xenon Strobe - J, Hz Xenon Strobe - J, Hz Xenon Strobe - J, Hz Xenon Strobe - J, Hz m, selectable tones, stages XH-BNDA m, selectable tones, stages XH-BNDB m, selectable tones, stages XH-BNAA m, selectable tones, stages XH-BNAB a b c d Voltage V DC V DC V DC...V AC...V AC The V DC voltage is only configurable with the Xenon, J beacon type. A B c Beacon Type Xenon strobe - J, Hz Xenon strobe - J, Hz d Lens Color Clear Yellow XB-BNDA XB-BNDA XB-BNDB XB-BNDB XB-BNAA XB-BNAA XB-BNAB XB-BNAB Publication A-CAA-EN-P -