STOP MN/DOT SAFE INTERSECTIONS PROJECT

Transcription

1 -/"0 gauge Telespar posts at 8" spacing on Safe Base Multidirectional Slip Base. CSAH /8/0 :8: PM " " ("x") dynamic blank-out sign, mounted on sign posts, aimed at stopped driver s eye. -/" Conduit from ground line to sign and attached to sign post (for cables). -/c# Armored cable to sign. wood pole (with breakaway provisions) in NE corner of intersection. Sensys Access Point mounted 0 above ground line. Sensys Repeater mounted 0 above ground line (aimed at east repeater). Controller enclosure and Controller equipment mounted on pole. " Conduit from Controller enclosure to HH. Access Point cable to Controller (-CAT cable). -/c# and -/c# (grd) to Controller. ) Wild Rice Electric is electrical service provider for this system. ) Devices installed at distances listed from the intersection Access Pt/Repeater on Wood Pole Wireless Detectors Hand Hole (No. ) " Conduit wood pole (with breakaway provisions), installed from wireless detector. Sensys Repeater mounted 0 above ground line (aimed at Access Point). Direct buried cable Loop detector Sensys Wireless Detectors (instaled per manufacturer specifications). S:\KO\M\Mntmd\9\Final Layouts\As Builts\TH00_CSAH_As-Built.dgn Default mmccurdy CITY NAME 0 0 -lb/ft U-Channel posts at 0" spacing, with lb/ft U-Channel knee brace. " " (8"x8") & " " ("x") signs. " Flashing LED yelow beacon (mounted above and from edge of sign). /" Conduit from groundline to flasher and attached to sign post (for cables). -/c # Armored Cable to flasher. - x PVC Loop detectors, installed 9 feet apart. - x Loop detector, installed 0 from lead detector. PHONE: () VADNAIS CENTER DR. ST. PAUL, MN 0 MNTMD 9 0/8/ 0 0 HH TO HH HH TO HH: 0 -/c# (direct bury) HH TO HH: HH TO HH: 0 " Conduit (directional bore), -/c# Armored cable SOURCE OF POWER () TO HH: " Conduit, -/c#, -/c# (grd) " Conduit, -/c#, -/c# (grd) HH TO Sign : -/c# Armored cable (direct bury) " Conduit (directional bore), -/c#, -/c#, -/c# Armored cables, -/c# (grd) HH TO Sign : -/c# Armored cable (direct bury) CITY NAME HH TO HH: TH 00 HH TO Controller (on wood pole): " Conduit, -/c#, -/c#, -/c# Armored cables, -/c# (ground) HH TO Sign : -/c# Armored cable (direct bury) -/c# (direct bury) HH TO Sign : -/c# Armored cable (direct bury) NOTE: THIS PLAN IS BEING PROVIDED INMATIONAL PURPOSES ONLY. IN-PLACE TH 00 & CSAH ICW SYSTEM, MN

2 /8/0 :00:0 PM lb/ft U-Channel posts at 8" spacing. TAPCO " " ("x") flashing blinkersign, mounted on sign posts, aimed at stopped driver s eye. /" Conduit from sign to nearest handhole and attached to sign post (for cables). -/c # and -/c# (grd) to sign. wood pole (with breakaway provisions) near SOP. Sensys Access Point mounted 0 above ground line. Sensys Repeaters mounted 0 above ground line ( aimed at NB detectors, aimed at east repeater). Controller enclosure mounted on pole. Access Point cable to Controller ( CAT- cable). wood pole (with breakaway provisions), instaled 0 from wireless detector. Sensys Repeater mounted 0 above ground line (aimed at Access Point). -lb/ft U-Channel posts at 0" spacing, with lb/ft U-Channel knee brace. " " (8"x8") & " " ("x") signs, " Flashing LED Yelow Beacon (mounted above and from edge of sign). /" Conduit from flasher to nearest handhole and attached to sign post (for cables). -/c # and -/c# (grd) to flasher. Sensys Puck Detectors ( instaled apart with the lead detector at through/left vehicle stopping location, and instaled at right turn vehicle stoping location, from other lead detector. Sensys Wireless Detector (installed per manufacturer specifications). All detectors installed per manufacturer specifications). S:\KO\M\Mntmd\9\Final Layouts\As Builts\TH0_CSAH_As-Built.dgn Default mmccurdy M.P.H. Pole installed from edge of roadway. 0 ) Otter Tail Power is electrical service provider for this system. ) Devices installed at distances listed from the intersection PHONE: () VADNAIS CENTER DR. ST. PAUL, MN 0 NOTE: THIS PLAN IS BEING PROVIDED INMATIONAL PURPOSES ONLY. MNTMD 9 0/8/ UNDERWOOD DOES NOT CROSS 00 CSAH CROSS DOES NOT 00 Controller TO HH: UNDERWOOD 0 SOURCE OF POWER () TO Controller: " Conduit, -/c#, -/c# (grd) " Conduit, -/c#, -/c# (grd) HH TO HH: " Conduit (directional bore), -/c#, -/c# (grd) HH TO HH: " Conduit (directional bore), -/c#, -/c# (grd) HH TO Signs and : /" Conduit, -/c#, -/c# (grd) HH TO Signs and : /" Conduit, -/c#, -/c# (grd) TH 0 Sign installed from edge of roadway. Consistent with existing stop sign lateral offset. Access Pt/Repeater on Wood Pole Wireless Detectors Hand Hole (No. ) " Conduit (except where noted) IN-PLACE TH 0 & CSAH ICW SYSTEM UNDERWOOD, OTTER TAIL, MN M.P.H.

3 DOUGLAS TH 9 /8/0 ::0 PM Radar -lb/ft U-Channel posts at 0" spacing. W-X8A " " (8"x8") and " " ("x") signs, installed on u-channel sign posts. Solar/Flasher Component. Ver-Mac Controller Enclosure. Ver-Mac Side Fire Doppler Radar. Communication/Power cables. 0 -/"0 gauge Telespar posts at " spacing on Safe Base Multidirectional Slip Base Solar-Battery Power Kit (Installed by Ver-Mac). Ver-Mac Controller Enclosure (Installed By Ver-Mac). Ver-Mac Side-Fire Presence Detector (Installed By Ver-Mac). Ver-Mac Short Range Doppler Radar (Installed By Ver-Mac) Required cables (Installed by Ver-Mac). -/"0 gauge Telespar posts at 8" spacing on Safe Base Multidirectional Slip Base TAPCO " " ("x") blinkersign, mounted on sign posts,. aimed at stopped driver s eye. Required cables (Installed by Ver-Mac). Default mmccurdy Because of steep ditch in this corner, signs are installed from edge of roadway. Offset is consistent with exsting stop sign lateral offset. 9 MINNESOTA 00 DOUGLAS MINNESOTA 9 CSAH ) No underground utilities or electrical service at this intersection. ) Devices installed at distances listed from the intersection. extension of near side street edge of roadway on mainline). S:\KO\M\Mntmd\9\TH9_CSAH_AsBuilt.dgn PHONE: () VADNAIS CENTER DR. ST. PAUL, MN 0 MNTMD 9 0 NOTE: THIS PLAN IS BEING PROVIDED INMATIONAL PURPOSES ONLY. IN-PLACE TH 9 & CSAH ICW SYSTEM MILTONA, DOUGLAS, MN 0/8/

4 CLAY TH /8/0 :: PM Default mmccurdy S:\KO\M\Mntmd\9\Final Layouts\As Builts\TH_CSAH_As-Built.dgn SOURCE OF POWER () TO HH: " Conduit, -/c#, -/c# (grd) HH TO Controller " Conduit, -/c#, Wavetronix cables, -/c#, 9-/c# (grd) HH TO HH: " Conduit, Wavetronix cable, -/c#, -/c# (grd) Sign TO HH and HH: /" Conduit, -/c#, -/c# (grd) HH TO Wavetronix Sensor : " Conduit, Wavetronix cable, -/c# (grd) Sign TO HH and HH: /" Conduit, -/c#, -/c# (grd) HH TO HH: PHONE: () ST. PAUL, MN 0 " Conduit (directional bore), Wavetronix cable, -/c# (grd) HH TO HH: " Conduit (directional bore), Wavetronix cables, -/c#, -/c# (grd) Sensor TO HH and HH: /" Conduit, Wavetronix cable, -/c# (grd) HH TO HH: " Conduit, Wavetronix cable, -/c#, -/c# (grd) HH TO HH: " Conduit (directional bore), Wavetronix cable, -/c#, -/c# (grd) HH TO HH: " Conduit, Wavetronix cable, -/c#, -/c# (grd) HH TO Wavetronix Sensor : " Conduit, Wavetronix cable, -/c# (grd) ) Xcel Energy is electrical service provider for this system. ) Devices installed at distances listed from the intersection VADNAIS CENTER DR. MNTMD 9 0/8/ CROSS DOESNOT 00 9 CLAY CROSS DOES NOT -/" 0 gauge Telespar posts at 8" spacing on Safe Base Multidirectional Slip Base. 00 " " ("x") dynamic blank-out sign, mounted on sign posts, aimed at stopped driver s eye. -/" Conduit from sign to nearest handhole and attached to sign post (for cables). -/c# and -/c# (grd) to sign. " NEMA R P-Cabinet and Controler equipment on concrete foundation. Wavetronix Smart Sensor Matrix, mounted on light pole. Wavetronix sensor cable and -/c# (grd) to sensor. wood pole (with breakaway provisions). " Conduit attached to pole and extended to Sensor (for cable). CSAH -/" 0 gauge Telespar posts at 0" spacing on Safe Base Multidirectional Slip Base. " " (8"x8") dynamic blank-out sign & " " ("x") static sign, " Flashing LED yelow beacon (mounted above and from edge of sign). -/c# and -/c# (grd) to blank-out sign. -/c# to flasher. Wavetronix Advance Sensor, mounted on wood pole. Wavetronix sensor cable and -/c# (grd) to sensor. -/" Conduit from sign to handhole and attached to sign post (for cable). NOTE: THIS PLAN IS BEING PROVIDED INMATIONAL PURPOSES ONLY. Wavetronix Sensor Hand Hole (No. ) " NMC (except where noted) Cabinet Wood Pole IN-PLACE TH & CSAH ICW SYSTEM COMSTOCK, DOUGLAS, MN

5 SIGN R R /8/0 :0: PM SOURCE OF POWER () TO HH: " Conduit, -/c#, -/c# (grd) HH TO Controller " Conduit, -/c#, Wavetronix cables, -/c#, -/c# Armored cables, -/c#, -/c# (grd) HH TO HH: " Conduit, Wavetronix cables, -/c#, -/c# Armored cables, -/c#, -/c# (grd) HH TO HH: " Conduit (directional bore), Wavetronix cable, -/c# -/c# Armored cable, -/c#, -/c# (grd) HH TO HH: -/c# (direct buried) SIGN POLK 0 -/" 0 gauge Telespar posts at 8" spacing on Safe Base Multidirectional Slip Base. " " ("x") dynamic blank-out sign, mounted on sign posts, aimed at stopped driver s eye. -/" Conduit from sign to nearest handhole and attached to sign post (for cables). -/c# and -/c# (grd) to sign. " NEMA R P-Cabinet and Controller equipment on concrete foundation. wood pole (with breakaway provisions). Wavetronix Advance Sensor, mounted 0 above ground line. Wavetronix sensor cable and -/c# (grd). " Conduit attached to pole and extended to sensor (for cable). HH TO HH: " Conduit (under railroad tracks), -/c# Special HH installed west of rail centerline. S:\KO\M\Mntmd\9\Final Layouts\As Builts\TH_CSAH_As-Built.dgn Default mmccurdy HH TO HH9: " Conduit (directional bore), Wavetronix cable, -/c#, -/c# Armored cable, -/c# (grd) HH9 TO HH0: " Conduit, Wavetronix cable, -/c# Armored cables, -/c# (grd) HH0 TO Sign/Flasher: -/c# Armored cable (direct bury) HH TO HH: " Conduit (directional bore), -/c# HH TO HH8: -/c# (direct bury) HH TO HH: " Conduit, Wavetronix cable, -/c# Armored cables, -/c# (grd) HH TO Sign/Flasher: -/c# Armored cable (direct bury) Sign TO HH and HH9: /" Conduit, -/c#, -/c# (grd) 00 -/" 0 gauge Telespar posts at 0" spacing on Safe Base Multidirectional Slip Base. MNTMD 9 PHONE: () VADNAIS CENTER DR. ST. PAUL, MN 0 0/8/ " " (8"x8") dynamic blank-out sign & " " ("x") static sign, " Flashing LED yelow beacon (mounted above and from edge of sign). -/c# Amored Cable to blank-out sign. -/c# Amored Cable to flasher. Sensor TO HH0 and HH: /" Conduit, -/c#, -/c# (grd) /" Conduit from ground line to sign and attached to sign post (for cable). - x PVC Loop detectors, installed 9 apart - x PVC Loop detector, installed 00 from lead detector. NOTE: THIS PLAN IS BEING PROVIDED INMATIONAL PURPOSES ONLY. 0 TH R R of " RSC direct bored. below the base of rail. Transitions to 8 of " NMC on both ends. Special HH installed east of rail centerline POLK SIGN CSAH Wavetronix Sensor Hand Hole (No. ) " Conduit (except where noted) Direct buried cable Loop detector Wood Pole Cabinet ) PKM Electric is electrical service provider for this system. ) Devices installed at distances listed from the intersection IN-PLACE TH & CSAH ICW SYSTEM EUCLID, POLK, MN