PRODUCT CATALOG HUGHEYANDPHILLIPS.COM

Transcription

1 Catalog No O b st r u c t i o n L i g h t i n g PRODUCT CATALOG HUGHEYANDPHILLIPS.COM Lighting AT GREAT HEIGHTS For 75 Years. B ro a d c a s t Te l e c o m m u n i c a t i o n s Wi n d Tu r b i n e s Ta l l S t r u c t u re s U t i l i t i e s

2 Hughey & Phillips Obstruction Lighting Shines Brighter. About Hughey & Phillips For more than 75 years, Hughey & Phillips, LLC products have found their place atop some of the world s most monumental architectural achievements. At Hughey & Phillips, we make a complete line of cost-effective obstruction lighting and control solutions that are proven to be highly efficient and reliable with improved maintainability and a longer operational life. Cost-effective obstruction lighting and controls solutions Highly efficient products save energy and reduce maintainability costs Stand-alone fixtures or integrated systems available for low, medium and high intensity lighting products Longer operational life keep structures illuminated and replacements costs low Hughey & Phillips is a global leader in the design and manufacturing of obstruction lighting technology. The company offers complete solutions comprised of power and lighting systems designed and manufactured in the USA. As either stand-alone fixtures or as part of an integrated system, Hughey & Phillips low, medium, and high intensity lighting solutions provide illumination for radio and television transmission towers, communications and microwave antennas, wind turbines, grain elevators, buildings, smokestacks, bridges, and other obstructions to aerial navigation as specified by the FAA, FCC, ICAO, DGAC of Mexico and Transport Canada. Advancements in LED-based obstruction lighting technologies have resulted in lighting fixtures that extend our beacon service life up to 10 times longer than incandescent bulbs with lower power consumption. Additionally, our strobes use unique parabolic reflectors/ linear strobetubes optics and integrated flashhead blocking strips to minimize ground scatter light for more community friendly lighting systems. APPLICATIONS All low intensity lights are available as single or double lights. The low intensity and medium intensity lighting are used to mark air traffic obstructions. Different lights are used for different specific applications, all-round illuminated obstruction lights with a light intensity of 10 cd (Candela) or 32 cd, flashing medium intensity lights in red or white with 2,000 cd or 20,000 cd and even high-intensity lights in white with up to 270,000 cd. In the United States the use of specific lighting is defined in the FAA Advisory Circular 70/ on the marking of obstructions. The ICAO (International Civil Aviation Organization) or Local Aviation Authority governs for national regulations. Versatile Obstruction lighting solutions for any Industry. Hughey & Phillips engineers and designs a complete line of low, medium and high intensity lighting technology solutions that provide illumination for a wide range of industries: Broadcast Telecommunications Wind Turbines Tall Structures Utilities Whether you need to illuminate radio, television or communication towers; wind turbines; buildings; smokestacks; bridges; or other obstructions to aerial navigation, Hughey & Phillips provides innovative lighting technology solutions. We have a full engineering staff providing complete support and design in optical, electrical and mechanical disciplines to customize any of our products to fit your application s unique needs. To learn more, visit Ordering Information Designed for a wide range of obstruction lighting applications, Hughey & Phillips broad line of incandescent, xenon and LED-based lighting fixtures and control solutions provide long-life operation and highly reliable performance. Contact a Hughey & Phillips representative today by visiting or by calling toll-free

3 Lighting Up the World s Towering Achievements. PRODUCT OVERVIEW Hughey & Phillips obstruction lights have a sturdy construction, are built to last and fulfill both national and international specifications. All our lights are completely non-corroding, low-maintenance lights. Our product portfolio includes state-of-the-art LED low and medium intensity obstruction lights as well as lights with a conventional light-source ranging from simple incandescent obstruction lights to highintensity strobe lights for special applications. Our power-saving LED lights guarantee a life span that is several times longer than conventionally equipped lights. This is achieved by a redundant circuit design and reduction of power consumption by over 90% of the normal usage of incandescent lights. Infrared (IR) LED systems are also available. Tower & Obstruction Lighting Guide The Hughey & Phillips tower and obstruction lighting guide provides the latest FAA, FCC, Transport Canada & ICAO tower and obstruction products for lighting buildings, towers, smokestacks, grain elevators or other structures, either temporary or permanent, which might present obstructions to air navigation. References will be made in this guide to FAA, FCC, Transport Canada & ICAO requirements. The specifications and guidelines referred to are the following: FAA Advisory Circular No. 150/ Specification for Obstruction Lighting Equipment FAA Advisory Circular AC 70/7460-1K obstruction Marking and Lighting FCC Rules and Regulations Part 17 construction, Marking and Lighting of Antenna Structure ICAO Aerodromes Annex 14 international Standards and Recommended Practices Transport Canada CAR Certified by the Secretary of Communications & Transport of Mexico Copies of these documents are available from the issuing agency or by contacting Hughey & Phillips. All Hughey & Phillips products where applicable are qualified to FAA specifications AC150/ In order to maintain an FAA listing, Hughey & Phillips must undergo rigid quality review twice yearly by an independent test laboratory. MAKING THE WORLD BRIGHTER. For over 75 years, Hughey & Phillips obstruction lighting has earned a reputation for quality, dependability and innovation the world over. In fact, we ve illuminated some of the globe s highest structures on six continents. low intensity 4 MEDIUM intensity HIGH intensity international 9 22 products 26 cables 34 diagrams 40 accessories lighting systems faa standards 76

4

5 Low intensity

6 LOW INTENSITY FAA Type: L-810 Steady Burn Obstruction Light HORIZON L-810 LED OBSTRUCTION LIGHT APPLICATION The Hughey & Phillips L-810 Obstruction Light provides an LED based solution to the FAA L-810 style of steady burning lights. The L-810 LED is currently available in both single and double configurations operating at 120V, 240V, 277VAC and also in a range of 9-48 VDC. Both configurations are available as original equipment or as a direct replacement to the existing socket/lamp/lens on H&P L-810 Incandescent OB2x Series obstruction lights. FAA Type: L-810 Steady Burn Obstruction Light ICAO Type: Low Intensity Type B Obstacle Light ETL Certified: FAA AC F Compliant to: ICAO Annex 14, CAR , MIL-C-7989 Features: LED based obstruction lights last over 15 times longer than an incandescent light Approximately 94% less power than 116 Watt standard incandescent lamp 4 Watt Power Consumption (AC version) / 3.4 Watts (DC Version) Available in both side and bottom conduit hubs at ¾ and 1 NPT Weather resistant lamp assembly & housing Self-contained wiring compartment on double units eliminates additional boxes Operates as a steady burn or flashing light Resistant to shock and vibration Direct replacement for existing incandescent fixtures 5 Year Warranty Photometric Specifications Beam Spread: 360 Horizontal, 10 Minimum Vertical Effective Intensity: > 32 Candela Mechanical Specifications Base Material: Cast Aluminum with aviation red powder coat Lens: Heat resistant clear glass Single: 8 x 5.5 x 5.5 (H x W x L), 2 lbs. Double: 8 x 5.5 x 11.5 (H x W x L), 6 lbs. Environmental Specifications Temperature: -55 C to +55 C (-67 F to 130 F) Humidity: 95% Relative Humidity Miscellaneous: Will withstand exposure to wind-blown rain from any direction, salt-laden atmosphere and indspeeds of 240 kph (150 mph). Part Number Description L-810 LED VAC SGL BOT HUB 3/ L-810 LED VAC SGL BOT HUB L-810 LED VAC SGL SIDE HUB 3/ L-810 LED VAC SGL SIDE HUB L-810 LED VAC DBL BOT HUB 3/ L-810 LED VAC DBL BOT HUB L-810 LED VAC DBL SIDE HUB 3/ L-810 LED VAC DBL SIDE HUB L-810 LED 9-48VDC SGL BOT HUB 3/ L-810 LED 9-48VDC SGL BOT HUB L-810 LED 9-48VDC SGL SIDE HUB 3/ L-810 LED 9-48VDC SGL SIDE HUB L-810 LED 9-48VDC DBL BOT HUB 3/ L-810 LED 9-48VDC DBL BOT HUB L-810 LED 9-48VDC DBL SIDE HUB 3/ L-810 LED 9-48VDC DBL SIDE HUB 1 Spare Parts Description L-810 LIGHT MODULE VAC L-810 LIGHT MODULE 9-48VDC A6A0008AG NEOPRENE GASKET B6A0008AA LENS HOLDER w/7 CHAIN 6 HUGHEYANDPHILLIPS.COM

7 LOW INTENSITY FAA Type: L-810 Steady Burn Obstruction Light INCANDESCENT OBSTRUCTION LIGHTS APPLICATION The OB20 and OB21 single obstruction lights are equipped with a screw base lamp receptacle. The fixtures are cast aluminum and utilize flange type red fresnel lenses. The fixtures are available with either bottom entrance (OB20) or side entrance (OB21) for 3/4 or 1 conduit fittings. The fixtures are suitable for use with 120 or 230 VAC lamps. Certified to: FAA AC 150/ F Compliant to: Transport Canada CAR ICAO Annex 14 USAF AFMAN Models OB20A31 OB20A41 OB21A31 OB21A41 3/4 bottom conduit entrance 1 bottom conduit entrance 3/4 side conduit entrance 1 side conduit entrance Photometric Specifications Beam Spread: 360 Horizontal, 10 Minimum Vertical Effective Intensity: >32 Candela Mechanical Specifications Base Material: Cast aluminum with aviation red powder coat Lens: Heat resistant glass, red. Single Obstruction Light Dimensions: 230mm H x 140mm W x 140mm L (9 H x 5.5 W x 5.5 L) Weight: 1.8 Kg (4 Pounds) Environmental Specifications Temperature: -55 C to +55 C (-67 F to 130 F) Humidity: 95% Relative Humidity Miscellaneous: Will withstand exposure to wind-blown rain from any direction, salt-laden atmosphere and indspeeds of 240 kph (150 mph). Spare Parts and Accessories LH116120GE Lamp 120 VAC, 116 Watts FL02B02810 Red Fresnel Lens XLCB4S200 Lamp Receptacle A6A0008AG Neoprene Gasket LH DT Lamp 120 VAC, 116 Watts B6A0008AA Lens Holder w/7 Chain Toll Free 7

8 LOW INTENSITY FAA Type: L-810 Steady Burn Obstruction Light DOUBLE INCANDESCENT OBSTRUCTION LIGHTS APPLICATION The OB22 and OB24 double obstruction lights are equipped with two screw base lamp receptacles. The fixtures are cast aluminum and utilize flange type red fresnel lenses. The fixtures are available with either side entrance or bottom entrance for 3/4 or 1 conduit fittings. The fixtures are suitable for use with 120 and 230 VAC lamps. Models OB22A31 OB22A41 OB24A31 OB24A41 3/4 bottom conduit entrance 1 bottom conduit entrance 3/4 side conduit entrance 1 side conduit entrance Double Obstruction Lights With Automatic Transfer Relay In many circumstances it is highly desirable, or required, to employ a lamp transfer relay with a double obstruction light. Upon failure of the first lamp, the relay will transfer power to the second, or standby lamp. The relay is mounted within the fixture base. This relay is of the single pole, single throw, normally closed type. Only one lamp in the double obstruction light is energized when a transfer relay is used. The fixtures are suitable for use with 120 and 230 VAC lamps. Models OB22A41TM1 OB24A41TM1 3/4 or 1 bottom conduit entrance 3/4 or 1 side conduit entrance Photometric Specifications Beam Spread: 360 Horizontal, 3 Minimum Vertical Effective Intensity: > 32 Candela Mechanical Specifications Base Material: Cast aluminum with aviation orange, powdercoat paint finish Lens: Heat resistant glass, red Double Obstruction Light Dimensions: 235mm H x 140mm W x 292mm L (9.25 H x 5.5 W x 11.5 L) Weight: 3.75 Kg (8.25 Pounds) Environmental Specifications Temperature: -55 C to +55 C (-67 F to 130 F) Humidity: 95% Relative Humidity Miscellaneous: Will withstand exposure to wind-blown rain from any direction, salt-laden atmosphere and windspeeds of 240 kph (150 mph) Spare Parts and Accessories LH116120GE Lamp 120 VAC, 116 Watts FL02B02810 Red Fresnel Lens XLCB4S200 Lamp Receptacle A6A0008AG Neoprene Gasket LH DT Lamp 120 VAC, 116 Watts 6A0013SK3 Transfer Relay Assembly B6A0008AA Lens Holder w/7 Chain 8 HUGHEYANDPHILLIPS.COM

9 medium intensity

10 MEDIUM INTENSITY FAA Type: L-864, L-865, and L-866 Medium Intensity Lighting HORIZON Series LED strobe system Description The Horizon Dual Medium Intensity LED Strobe System provides daytime white and nighttime red lights in one unit. Its self-contained power supply, with available GPS sync and day/night sensor, simplifies wiring but also accepts external signals if desired. Advanced features include advanced LED modules, cutting edge optics, individual LED monitoring/ bypass, and active lightning protection (patent pending). The unit also monitors the system and provides a NO or NC alarm contact upon any system failure. Application Medium intensity obstruction lighting systems are typically used on structures between 150 (45m) and 500 (150m) above ground level to provide aviation safety. The use of a medium intensity white strobe during the daytime typically eliminates the need to paint the structure with aviation orange and white stripes. The use of a red flashing beacon at night provides a community friendly light. Hughey & Phillips medium intensity obstruction lights are designed for lighting tall structures such as communication, television and radio towers, wind turbines, smokestacks, cooling towers, tall buildings, catenary river crossings and bridges. FAA Type: L864, L865 or L-864/865 Medium Intensity Lighting ICAO Type: Type A/B Medium Intensity Obstacle Light ETL Certified: FAA Advisory Circular 150/ Compliant for use with: ICAO Annex 14, MIL-C-7989 DGAC of Mexico, CAR Photometric Specifications Day Mode (White): 20,000 candela ± 25% Night Mode (White or Red): 2,000 candela ± 25% Beam Spread: 3 minimum Horizontal Coverage: 360, omni-directional Flash Rate: 40 FPM Day & White Night 24 FPM Night Red Environmental Specifications Temperature: -40 C to +55 C (-40 F to 130 F) Humidity: 95% Relative Humidity Miscellaneous: Will withstand exposure to wind-blown rain from any direction, salt-laden atmosphere and windspeeds of 240 kph (150 mph) Mechanical Weight, Flashhead: 8 kg (17 lbs) Flashhead Lens Material: High Temp/UV Resistant Acrylic Electrical Input Voltages: 120, 230/240, 277, 480 VAC Input Frequencies: 50 or 60 Hz Power Consumption, Day: 25 Watts Power Consumption, Night: 15 Watts 10 HUGHEYANDPHILLIPS.COM

11 MEDIUM INTENSITY FAA Type: L-864, L-865, and L-866 Medium Intensity Lighting HORIZON Series FeatuRES Original Equipment Manufacturer Single Flashhead construction Failsafe Redundancy GPS Synchronization Available IR Capability Available Wiring Compatibility Interchangeable LED Modules Cutting Edge Optics design Lightest Flashhead Universal Input benefits Designed, engineered and manufactured by Hughey & Phillips One source for fixtures and complete lighting systems Compact design for dual (red/white) operation Automatic switching for nighttime redundancy of dual systems Built In GPS SYNC module Viewable with NVG Goggles Existing wiring can be used for retrofit applications Environmentally sealed connector Fewest number of control wiring on the market Single screw access Built-in Safety interlock switch Fully field serviceable unit H&P exclusively designed Eklipse optics package Community friendly lighting system 17 lbs Ease of handling and installation operating voltage of VAC, 50/60Hz These specifications are subject to change. dimensions Part Number Description FAA Type L-864, VAC 50/60Hz FAA Type L-865, VAC 50/60Hz FAA Type L-866, VAC, 50/60Hz FAA Type L-864/865, VAC 50/60Hz Toll Free 11

12 MEDIUM INTENSITY FAA Type: L-864 Medium Intensity Lighting MODEL KG mm Beacon For Airport and Obstruction Lighting Application Model KG mm Beacon is approved as a marker light for obstructions to air navigation such as television, radio, microwave and transmission line towers, bridges, water tanks, stacks and other tall structures as specified by the FAA. Model KG mm Beacon is in full compliance with FAA Beacon requirements for marking of obstructions to air navigation. Meets ICAO Requirements & Transport Canada Features Constructed of heavy aluminum casting, Model KG mm Beacon is completely weatherproof, and features: Concave base: with drain port at lowest point prevents accumulation of moisture from condensation. Hinged center frame: hinged at the center between the upper and lower lens assemblies to provide ready access for inspection and lamp replacement. The hinge rings, neoprene gasket, butterfly locking clamp, maintain a weatherproof center seal. Color filter supports: with flexible fins provide heat insulation and cushioning, thus eliminating color filter breakage from expansion and construction. Equipped with stainless hardware. IR compatible with enhanced flight vision systems that use IR energy emissions for imaging, including NVG goggles. Part No. Description FAA Designation Weight KG 114 F mm Beacon with Red Lens L lbs LH620120GE 620 Watts, 120 V Lamp LH700230HDT 700 Watts, 230 V Lamp 12 HUGHEYANDPHILLIPS.COM

13 MEDIUM INTENSITY FAA Type: L-864 Medium Intensity Lighting MODEL KG mm Beacon For Airport and Obstruction Lighting Descriptive Data Model KG mm Beacon is designed for service under all climatic conditions. Frame and hardware are constructed of non-ferrous materials. All the glassware is heat-resistant meeting FAA and Military Specifications. The Optical System consists of four red, heat-resistant lenses, designed to provide a definite beam through 360 O horizontally. The two lamp receptacles are mounted to properly position the two 620 or 700 watt Mogul Pre-focus Beacon lamps, thus providing correct beam distribution in accordance with FAA and Military specifications. A Three Terminal Connecting Block is mounted in the base allowing each lamp to be independently fed and monitored. Internal wiring is heat-resistant insulated flexible wire, terminates at the connecting block. Unless otherwise ordered, beacons are furnished with five feet of #12-3 Conductor Neoprene Cable, entering the base through a 1 Watertight Connector. Conduit may be used by removing the Watertight Connector and disconnecting the External Cable. Neoprene Gaskets are designed for long life under extreme temperatures. Upper Gasket Retainer, and Lower Gasket Retainer assure Weatherproof protection between lenses Toll Free 13

14 MEDIUM INTENSITY FAA Type: L-865 and L-866 Medium Intensity Lighting FlashGuard 2000 FlashGuard 2000 System Description The FlashGuard 2000 Medium Intensity White Lighting System combines a daytime white strobe light and a nighttime white flashing light into a single flashhead. The system is also available as a red flashhead which can be used at night in place of red incandescent lighting, for much longer light source life. The flashhead is powered and controlled by a power supply that can be mounted remotely at the base of the structure. The power supply constantly monitors the operation of the system, and provides alarm contact closure upon any failure. The system automatically switches between day, twilight, and night intensities by the use of a calibrated photocell. FlashGuard 2000 flashheads incorporate a light blocking strip that minimizes ground scatter light, resulting in a community friendly lighting system. APPLICATION Medium Intensity obstruction lighting systems are typically used on structures between 150 (45M) and 500 (150M) above ground level to provide aviation safety. The use of a medium intensity white strobe during the daytime typically eliminates the need to paint the structure with aviation orange and white stripes. The use of a white flashing strobe at night provides an eye catching light for low flying aviators. Hughey & Phillips medium intensity obstruction lights are designed for lighting tall structures such as communication, television and radio towers, chimneys, cooling towers, tall buildings, catenary river crossings and bridges. This light is compatible with Enhanced Flight Vision Systems that use IR energy emissions for imaging, including NVG goggles. FAA Type: L-864, L-865 & L-866 Medium Intensity Lighting ICAO Type: Medium Intensity Obstacle Light Applicable Specifications: Conforms to: FAA Advisory Circular AC 70/ FAA Advisory Circular AC 150/ E ICAO Annex 14 Transport Canada TP 382E DGAC of Mexico 150/ E Electrical Specifications AC Input Power DC Input Power Power Options Transient Protection System Status Indicators Safety 120 VAC +/- 10%, 60 Hz, 1 phase standard; 195 watts day operation, 60 watts night operation 24 VDC +/- 10%;120 watts day operation, 45 watts night operation 240, 480 VAC +/- 10%; 60 Hz or 240, 480 VAC +/- 10%, 50 Hz Transient protection is provided by: Company proprietary circuits which incorporate series resistors and zener diodes on all signal lines 5 kilovolt rated transformer, primary and secondary line to ground insulation Rectifier diode network protection by varistors Two neon lamps and four LEDs indicate system and subsystem operating status. The flashhead and power supply are both equipped with interlocks so that opening either unit interrupts the capacitor charging circuit and discharges the high voltage energy storage capacitors in the power supply to less than 50 volts within 30 seconds. Environmental Specifications Temperature Humidity Wind Wind Loading Wind Blown Rain Salt Fog -67 F (-55 C) to F (+55 C) per MIL-STD % relative humidity per MIL-STD-810 Wind speeds up to 150 mph (67 m/sec) 72 lbs (32 kg) at 150 mpg (67 m/sec) Surface area is (0.12m2) Exposure to wind blown rain from any direction per MIL-STD-810 Exposure to salt-laden atmosphere per MIL-STD-810 optical performance specifications Beam Spread 1 Peak Flash (degrees) Intensity 2 Flash/Rate Duration 3 Mode Horizontal Vertical (candelas) (flashes/minute) (milliseconds) Day/Twilight min 15,000 min 40-L-865 <10 25,000 max 60-L-866 Night min 1,500 min 40 for L to 250 2,500 max 60 for L-866 Notes: 1. The lower edge of the vertical beam spread lies between 1.5 and -0.5 with respect to the horizon. 2. Flashlamp light out meets the FAA minimum requirements of 15,000 candelas day/twilight and 1,500 candelas night for a period of not less than one year. 3. When the effective flash duration is generated with a group of short flashes, the flash rate is not less than 30 per second. 14 HUGHEYANDPHILLIPS.COM

15 MEDIUM INTENSITY FAA Type: L-865 and L-866 Medium Intensity Lighting FlashGuard 2000 mechanical dimensions ss-175 power supply (470) (411) (394) Clearance (267) 8.63 (219) (438) (412) ss 120 photocontrol w/receptacle 5.00 (127) 5.00 (127) 0.44 (11) mounting hole 4 places Weight: 53 pounds (24 kilograms) 6.00 (152) 3.50 (89) 3/4 cable connector ss-120 photocontrol is removable for indoor installation 3.38 (86) ss-176 flashhead 5.00 (127) clearance 90 O 120 O flashhead globe lifts for access to flashtubes (404) 120 O 90 O 3/4 cable connector focal plane (419) 3.88 (98) 4.80 (122) 90 O mounting slot 0.69 x 0.81 (17 x 21) 6 places on (337) bolt circle (381) weight: 22 pounds (10 kilograms) bottom of flashhead for mounting with 3 or 4 fasteners Dimensions are in inches (millimeters) Toll Free 15

16 MEDIUM INTENSITY FAA Type: L-864, L-865, or L-866 Medium Intensity Lighting FlashGuard 2000B FlashGuard 2000B System Description The FlashGuard 2000B Medium Intensity White Lighting System combines a daytime white strobe light and a nighttime white flashing light into a single flashhead. The system is also available as a red flashhead which can be used at night in place of red incandescent lighting, for much longer light source life. The flashhead is powered and controlled by a power supply that can be mounted remotely at the base of the structure. The power supply constantly monitors the operation of the system, and provides alarm contact closure upon any failure. The system automatically switches between day, twilight, and night intensities by the use of a calibrated photocell. FlashGuard 2000B flashheads incorporate a light blocking strip that minimizes ground scatter light, resulting in a community friendly lighting system. White FG2000B APPLICATION Medium Intensity obstruction lighting systems are typically used on structures between 150 (45M) and 500 (150M) above ground level to provide aviation safety. The use of a medium intensity white strobe during the daytime typically eliminates the need to paint the structure with aviation orange and white stripes. The use of a white flashing strobe at night provides an eye catching light for low flying aviators. Hughey & Phillips medium intensity obstruction lights are designed for lighting tall structures such as communication, television and radio towers, chimneys, cooling towers, tall buildings, catenary river crossings and bridges. This light is compatible with Enhanced Flight Vision Systems that use IR energy emissions for imaging, including NVG goggles. Red FG2009B FAA Type: L-864 (Red) or L-865 (White) Medium Intensity Lighting ICAO Type: Medium Intensity Obstacle Light Applicable Specifications: Conforms to: FAA Advisory Circular AC 70/ FAA Advisory Circular AC 150/ ICAO Annex 14 Transport Canada TP 382E DGAC of Mexico 150/ F Photometric Specifications Day Mode (White): 20,000 candela ± 25% Night Mode (White or Red): 2,000 candela ± 25% Beam Spread: 3 minimum Horizontal Coverage: 360, omni-directional Ground Scatter: <3% Light Output at -10 Vertical Flash Rate: 40 FPM Day & White Night Mechanical Weight, Flashhead: 10 kg (22 lbs) Weight, Power Supply: 24 kg (53 lbs) Power Supply Enclosure: 304 Stainless Steel - standard. 316L Stainless Steel - optional Flashhead Lens Material: High Temp/UV Resistant Acrylic Stainless Steel - optional 316L environmental Temperature: -55 to +55 C (-67 F to +130 F) Will withstand exposure to: 95% relative humidity, wind-blown rain-direction, salt-laden atmosphere, Wind Speed - 240kph (150mph) Electrical Input Voltages: 120, 230/240, 277, 480 VAC Input Frequencies: 50 or 60 Hz Power Consumption, Day: 208 Watts Power Consumption, Night: 133 Watts Power Consumption, Backup: 77 Watts Peak Inrush Current: 120VAC Available Alarm Contacts (form C dry-contact): Power Failure, Mode Status, Strobe Failure, Sidelight #1 Fail, Sidelight #2 Fail 16 HUGHEYANDPHILLIPS.COM

17 MEDIUM INTENSITY FAA Type: L-864, L-865, or L-866 Medium Intensity Lighting FlashGuard 2000B System Features: Single flashhead provides white or red medium intensity operation with no moving parts Precise optics minimize ground scatter light Alarm contacts provided for connection to any monitoring system Rugged design of flashhead and power supply is suitable for outdoor installation in any climate Flashhead Features: Internally triggered Xenon strobe tubes utilized for long-life and maximum efficiency, without creating corrosive ozone Parabolic reflector optics and linear strobe tube optics combination provides very precise optics and blocks ground scatter light in both red or white operation Lens raises and locks in place, providing easy access to strobe tubes Only three components used in flashhead - minimal maintenance required at top of structure Safety interlock switch included No moving parts High temperature, UV resistant acrylic flashhead lens Power Supply Features: Provides power electronics, timing circuitry, and monitoring for lighting system Automatic day/night intensity control Manual intensity override Easily accessible components Plug-in-play circuit cards Control and monitoring for up two sidelight levels with four steady burning obstruction lights Fail-safe monitoring system with up to five remote alarm contacts Stainless steel NEMA 4X enclosure Low power consumption Toll Free 17

18 MEDIUM INTENSITY FAA Type: L-864 and L-865 Medium Intensity Lighting FlashGuard 3000 FlashGuard 3000 System Description The FlashGuard 3000 Medium Intensity Dual Lighting System combines a daytime white strobe light and a nighttime red flashing strobe into a single flashhead, eliminating the need for two separate lighting systems. The flashhead is powered and controlled by a power supply that can be mounted remotely at the base of the structure. The power supply constantly monitors the operation of the system, and provides alarm contact closure upon any failure. The system automatically switches between day and night intensities by the use of a calibrated photocell. FlashGuard 3000 flashheads incorporate a light blocking strip that minimizes ground scatter light, resulting in a community friendly lighting system. APPLICATION Medium intensity obstruction lighting systems are typically used on structures between 150 (45M) and 500 (150M) above ground level to provide aviation safety. The use of a medium intensity white strobe during the daytime typically eliminates the need to paint the structure with aviation orange and white stripes. The use of a red flashing beacon at night provides a community friendly light. Hughey & Phillips medium intensity obstruction lights are designed for lighting tall structures such as communication, television and radio towers, chimneys, cooling towers, tall buildings, catenary river crossings and bridges. This light is compatible with Enhanced Flight Vision Systems that use IR energy emissions for imaging, including NVG goggles. FAA Type: L-864/865 Medium Intensity Lighting ICAO Type: Type A/B Medium Intensity Obstacle Light ETL Certified: FAA Advisory Circular 150/ E Compliant for use with: ICAO Annex 14, MIL-C-7989 DGAC of Mexico, CAR Electrical Specifications AC Input Power DC Input Power Power Options Transient Protection System Status Indicators System Test Controls Safety 120 VAC +/- 10%, 60 Hz, 1 phase standard; 195 watts day operation, 60 watts alternate white night operation 24 VDC +/- 10%;120 watts day and red night operation, 45 watts alternate white night operation 240, 480 VAC +/- 10%; 60 Hz or 240, 480 VAC +/- 10%, 50 Hz Transient protection is provided by: Circuits which incorporate series resistors and zener diodes on all signal lines 5 kilovolt rated transformer, primary and secondary line to ground insulation Rectifier diode network protection by varistors Two neon lamps and four LEDs indicate system and subsystem operating status. Manual override switches for remote day and night operation testing. Push button operation for testing fault circuit operation. The flashhead and power supply are both equipped with interlocks so that opening either unit interrupts the capacitor charging circuit and discharges the high voltage energy storage capacitors in the power supply to less than 50 volts within 30 seconds. Environmental Specifications Temperature Humidity Wind -67 F (-55 C) to F (+55 C) per MIL-STD % relative humidity per MIL-STD-810 Wind speeds up to 150 mph (67 m/sec) Wind Loading 105 lbs (32 kg) at 150 mpg (240 kph). Surface area is 1.98 ft 2 Wind Blown Rain Salt Fog Exposure to wind blown rain from any direction per MIL-STD-810 Exposure to salt-laden atmosphere per MIL-STD-810 optical performance specifications Beam Spread 1 Peak Flash (degrees) Intensity 2 Flash/Rate Duration 3 Mode Horizontal Vertical (candelas) (flashes/minute) (milliseconds) Day/Twilight min 15,000 min 40-L-865 <10 25,000 max Night Red min 1,500 min for L ,500 max White Night min 1,500 min 40 for L to 250 Backup 2,500 max Notes: 1. The lower edge of the vertical beam spread lies between 1.5 and -0.5 with respect to the horizon. 2. Flashlamp light out meets the FAA minimum requirements of 15,000 candelas day/twilight and 1,500 candelas night for a period of not less than one year. 3. When the effective flash duration is generated with a group of short flashes, the flash rate is not less than 30 per second. 18 HUGHEYANDPHILLIPS.COM

19 MEDIUM INTENSITY FAA Type: L-864 and L-865 Medium Intensity Lighting FlashGuard 3000 mechanical dimensions ss-177 power supply (470) (411) (394) Clearance (267) 8.63 (219) (438) (412) ss 120 photocontrol w/receptacle 5.00 (127) 5.00 (127) 0.44 (11) mounting hole 4 places Weight: 53 pounds (24 kilograms) 6.00 (152) 3.50 (89) 3/4 cable connector ss-120 photocontrol is removable for indoor installation 3.38 (86) ss-178 flashhead Toll Free 19

20 MEDIUM INTENSITY FAA Type: L-864 and L-865 Medium Intensity Lighting FlashGuard 3000B FlashGuard 3000B System Description The FlashGuard 3000B Medium Intensity Dual Lighting System combines a daytime white strobe light and a nighttime red flashing strobe into a single flashhead, eliminating the need for two separate lighting systems. The flashhead is powered and controlled by a power supply that can be mounted remotely at the base of the structure. The power supply constantly monitors the operation of the system, and provides alarm contact closure upon any failure. The system automatically switches between day and night intensities by the use of a calibrated photocell. FlashGuard 3000B flashheads incorporate a light blocking strip that minimizes ground scatter light, resulting in a community friendly lighting system. APPLICATION Medium intensity obstruction lighting systems are typically used on structures between 150 (45M) and 500 (150M) above ground level to provide aviation safety. The use of a medium intensity white strobe during the daytime typically eliminates the need to paint the structure with aviation orange and white stripes. The use of a red flashing beacon at night provides a community friendly light. Hughey & Phillips medium intensity obstruction lights are designed for lighting tall structures such as communication, television and radio towers, chimneys, cooling towers, tall buildings, catenary river crossings and bridges. This light is compatible with Enhanced Flight Vision Systems that use IR energy emissions for imaging, including NVG goggles. FAA Type: L-864/865 Medium Intensity Lighting ICAO Type: Type A/B Medium Intensity Obstacle Light ETL Certified: FAA Advisory Circular 150/ F Compliant for use with: ICAO Annex 14, MIL-C-7989 DGAC of Mexico, CAR Photometric Specifications Day Mode (White): 20,000 candela ± 25% Night Mode (White or Red): 2,000 candela ± 25% Beam Spread: 3 minimum Horizontal Coverage: 360, omni-directional Ground Scatter: <3% Light Output at -10 Vertical Flash Rate: 40 FPM Day & White Night, 24 FPM Red Night Environmental Specifications Temperature: -55 C to +55 C (-67 F to 130 F) Humidity: 95% Relative Humidity Miscellaneous: Will withstand exposure to wind-blown rain from any direction, salt-laden atmosphere and indspeeds of 240 kph (150 mph). Mechanical Weight, Flashhead: 16 kg (34 lbs) Weight, Power Supply: 32 kg (70 lbs) Power Supply Enclosure: 304 Stainless Steel - standard. 316L Stainless Steel - optional Flashhead Lens Material: High Temp/UV Resistant Acrylic Electrical Input Voltages: 120, 230/240, 277, 480 VAC, 24VDC Input Frequencies: 50 or 60 Hz Power Consumption, Day: 208 Watts Power Consumption, Night: 133 Watts Power Consumption, Backup: 77 Watts Peak Inrush Current: 120VAC Available Alarm Contacts (form C dry-contact): Power Failure, Mode Status, Strobe Failure, Sidelight #1 Fail, Sidelight #2 Fail 20 HUGHEYANDPHILLIPS.COM

21 MEDIUM INTENSITY FAA Type: L-864 and L-865 Medium Intensity Lighting FlashGuard 3000B System Features: Single flashhead provides white or red medium intensity operation with no moving parts Dual flashtubes and dual trigger transformers provide night time redundancy - no single point of failure in the flashhead Precise optics minimize ground scatter light Alarm contacts provided for connection to any monitoring system Rugged design of flashhead and power supply is suitable for outdoor installation in any climate Flashhead Features: Upper optics provides red flashing beacon lighting Lower optics provides medium intensity white strobe lighting Identical strobe tube for red and white eliminates extra spare parts Internally triggered Xenon strobe tubes utilized for long-life and maximum efficiency, without creating corrosive ozone Parabolic reflector optics and linear strobe tube optics combination provides very precise optics and blocks ground scatter light in both red or white operation Lens raises and locks in place, providing easy access to strobe tubes Only five components used in flashhead - minimal maintenance required at top of structure Dual flashtubes and trigger transformers provide night time redundancy Safety interlock switch included No moving parts High temperature, UV resistant acrylic flashhead lens Power Supply Features: Provides power electronics, timing circuitry, and monitoring for lighting system Automatic day/night intensity control Manual intensity override Easily accessible components Plug-in-play circuit cards Control and monitoring for up two sidelight levels with four steady burning obstruction lights Fail-safe monitoring system with up to five remote alarm contacts Stainless steel NEMA 4X enclosure Low power consumption Toll Free 21

22

23 high intensity

24 HIGH INTENSITY FAA Type: L-865 and L-857 StrobeGuard SS-122/125 SS-125 Obstruction Strobe Light The StrobeGuard SS-125 is a single enclosure obstruction light designed to meet or exceed the requirements of Advisory Circular 150/ The enclosures are fabricated from 304L stainless steel. All plug-in printed circuit boards are protected with a coating which meets the physical and electrical requirements of MIL-I-46058B. The SS-125 is supplied with a lightning arrestor capable of withstanding repeated 10,000 ampere current surges. Operated with the SS-122 Controller, the system is completely self-activating for monitoring and identifying any malfunctioning light and is equipped to initiate a remote alarm. The number of SS-125 obstruction lights used on an installation depends upon the type of obstruction and its height. FAA Type: L-856 High Intensity Lighting ICAO Type: Type A High Intensity Obstacle Light ETL Certified: FAA Advisory Circular AC 150/ Compliant for use with: ICAO Annex 14, Canadian Aviation Regulation ICAO Annex 14, MIL-C-7989, DGAC of Mexico Photometric Specifications Day 270,000 candela ± 25% Twilight 20,000 candela ± 25% Night 2,000 candela ± 25% Beam Spread 3 Vertical minimum Horizontal Coverage 120 coverage Cut off Angle <3% light output at -10 Vertical Flash Rate 40 Flashes per Minute (FPM) Environmental Temperature -55 C to +55 C, -67 F to F Humidity 95% relative humidity Will withstand exposure to: Wind-blown rain from any angle Salt-laden atmosphere, Wind speed of 240kph (150mph) Mechanical Weight, Controller 11kg (24 lbs) Dimensions, Controller 14 H x 12 W x 6 D Weight, Flashhead 37kg (82 lbs) Dimensions, Flashhead 14.4 H x 16.2 W x D Enclosure Rating 304 Stainless Steel, NEMA 4X Electrical Input Voltages 120, 208, 240, 277, 380, 480V Input Frequency 50 or 60 Hz Power Consumption 0.55kVA per flashhead 24 HUGHEYANDPHILLIPS.COM

25 HIGH INTENSITY FAA Type: L-865 and L-857 StrobeGuard SS-122/125 SS-122 Controller: StrobeGuard Controllers contain the flash interval and timing circuits, intensity selection controls, and monitoring receivers with status indicators required to operate the SS-125 strobe light. The controller is of modular construction with solid state circuitry for long life and ease of maintenance. StrobeGuard controllers are designed to operate up to 32 obstruction lights at distances up to 4700 feet. Each controller is equipped with the necessary manually operated controls to test all modes of operation. Digital monitor lamps are provided and illuminate when a flashhead or power supply is not operating as required. Each monitor lamp is operated in a coded mode indicating the location of the flashhead/ power supply which is malfunctioning. SS-124 Ambient Sensor: The SS-124 Light Sensor continuously monitors the ambient lighting conditions and inputs to the StrobeGuard controller the necessary information to automatically control the switching of daytime, twilight and nighttime modes of operation. The SS-124 is easy to install with the built-in mounting holes. StrobeGuard Control StrobeGuard controls contain the flash interval and timing circuits, intensity selection controls and monitoring circuitry with status indicators. The StrobeGuard control system is designed to operate up to 24 flashheads at a distance of up to 2500 feet (760 M), using a noise-resistant communications format. Each control is equipped with the necessary manually operated controls to test all modes of operation. Bi-color green/red LEDs are provided to indicate proper operation or fault of each flashhead. Features: Fail-safe monitoring system Parabolic Optics minimize ground scatter light: <3% of peak intensity at -100 Two-wire cable for sync, mode and monitoring Safety interlocks in each flashhead Long-life internally triggered strobe tubes Automatic three-level intensity control Manual intensity override Easily accessible replaceable components Plug-in-play circuit cards Remote alarm contacts Stainless steel NEMA 4X enclosure Vertical level indicator and adjustment system Low power consumption Minimal wind loading and weight IR Compatible with NVG goggles Toll Free 25

26

27 international

28 INTERNATIONAL PRODUCTS FOR LOW INTENSITY OBSTRUCTION LIGHTS LED LAMP E27 RTO / OTL APPLICATION The LED-lamp was designed to substitute the current 100/116W incandescent lamp in low intensity obstacle lights type RTO and OTL for the 10cd requirement Low Intensity Obstacle Lights Type A, acc. To ICAO Annex 14, table 6-3, issue July In combination with a clear lens the RTO Obstacle light with LED-Lamp E27 RTO meets ICAO Low Intensity Obstacle Light Type B (32 cd) requirement. Regulations ICAO annex 14, table 6-3, issue July 2004 CE regulations Characteristics Compact and robust design Replacement for E27 incandescent lamp Can be substituted into existing obstacle lights Long life expectancy Build-in redundancy by redundant connection of LEDs Power consumption approx. 4W Wide voltage and frequency range Technical Data Structure: LED-Lamp as replacement for incandescent lamp Number of LEDs 6 Color red Chromaticity acc. To ICAO, annex 14, appendix 1, fig. A1-1 Lamp base E27 Voltage 100V 230V AC, 50/60 Hz Power consumption approx. 4 Watt Temperature range -40OC OC Dimensions, weight, packing data LED Lamp E 27 RTO Dimensions: approx x 73.0 mm (h x 0) Weight: approx kg LED Lamp E 27 OTL Dimensions: approx x 73.0 mm (h x 0) Weight: approx kg Packing unit: 4 pieces Box dimensions: approx. 165 x 165 x 110 mm (l x w x h) Ordering information LED Lamp E27 RTO, 32 cd LED Lamp E27 OTL, 10 cd 28 HUGHEYANDPHILLIPS.COM

29 INTERNATIONAL PRODUCTS FOR LOW INTENSITY OBSTRUCTION LIGHTS LED LAMP E27 RTO / OTL Toll Free 29

30 INTERNATIONAL PRODUCTS OBSTACLE LIGHTING FOR WIND TURBINES LED 170W APPLICATION Night marking for wind turbines according to the national regulation for marking obstructions to air traffic Richtlinie zur Kennzeichnung von Luftfahrthindernissen issued by the German Federal Ministry of Transport, Building and Housing. Type W Red Function A pair of the flashing red obstruction lights LED170 are specified for the night marking of wind turbines higher than 100m. The timing of the LED170 flashing identifies the marked obstruction as wind turbine to the pilots of aircrafts. The system automatically switches on by the use of a calibrated photocell. In order to allow synchronization of the flashing of the LED170 lights with those on other wind turbines, the LED170 is optionally synchronized by the use of GPS. The pair of LED170 lights per wind turbine in conjunction with a separate uninterrupted power supply plus control electronics forms the flashing light system designed for an individual wind turbine. The LED170 light is maintenance free. Characteristics Maintenance free obstruction light using high-lumen LEDs High lifetime by optimized heat dissipation and low operating current of the LEDs Constant light output by compensation of temperature changes Rugged housing with self-cleaning transparent cover Mechanical interface identical to that of the FG2000/3000B light family Fault detection National regulation for marking aeronautical obstacles, part A and B Technical Data Power Supply system 690 or 230V, 50Hz Power Consumption system Approx. 400VA at start of charge Mechanical dimensions 381 x 405 mm (L x H) Weight 8.5 kg Flashhead Power Consumption 22 Watts Light Sources High performance LEDs Light Intensity >170cd Horizontal beam spread 360 Vertical beam spread Min 170cd ±5 Min 34cd ±10 Min 3,4cd ±15 Timing of flashing: 1s on - 0.5s off - 1s on - 1.5s off Ordering information LED170W 230V, 50Hz LED170W 690V, 50Hz LED170W 230V, 50Hz, with GPS LED170W 690V, 50Hz, with GPS 30 HUGHEYANDPHILLIPS.COM

31 INTERNATIONAL PRODUCTS OBSTACLE LIGHTING FOR WIND TURBINES LED 170W Toll Free 31

32 INTERNATIONAL PRODUCTS FAA Type: L-864 Medium Intensity Lighting LED 2000 APPLICATION The flashing red omni-directional medium intensity obstacle light LED 2000 is applied to mark obstacles. The LED 2000 is in compliance with ICAO, July Annex 14, Volume 1, Table 6-3, for Medium Intensity Obstacles Lights Type B and C. Steady burning operation at Type C is alternatively possible. FAA Type: L-864, AC150/ F ICAO Type: Annex 14, Tables 6-3, July 2004 NATO: Stanag 3316 CE-Mark LED 2000 characteristics LED-Medium Intensity Obstacle Light 2,000cd Extremely low light emittance downwards Light intensity at -1 O Max. 1,125cd Min. 750cd Effective thermal management Steady burning operation as Type C light, up to max. environmental temperature of +55 O C Very high lifetime Redundant circuitry for LEDs technical data Construction: LED - Obstacle Light Number of LED: 28 Color of light: Red Chromaticity: according to ICAO, Annex 14, Volume 1, Figure A 1-1 Photometry: according to ICAO, Annex 14, Volume 1, Table 6-3 Medium Intensity Obstacle Light 2000cd Type B,C Main voltage: 230 V AC + 10%, -15%, 50/60 Hz Power consumption: 80 Watt in steady burning operation 40 Watt in blinking mode Temperature range: -40 O C O C Dimensions, weight, packing data Dimensions: 335 x 410 mm (H x O) Weight: appr. 9 kg Packing unit: 1 piece Packing size: appr. 600 x 500 x 600 mm (L x W x H) part no LED HUGHEYANDPHILLIPS.COM

33 INTERNATIONAL PRODUCTS FAA Type: L-864 Medium Intensity Lighting LED 2000 Fig 1: LED 2000 horizontal light distribution in beam centre according to ICAO Fig 2: LED 2000 horizontal light distribution at -1 O down (-1 O Cutoff condition according to ICAO) Fig 3: LED 2000 vertical light distribution according to ICAO Toll Free 33

34

35 cables

36 CABLES Cable ALUMINUM BINDER TAPE MYLAR SHIELD 11 JACKET FILLER Ø.600 ASSEMBLY Cabling - Core-minimum filler to keep as flexible as practical Outer Layer - 7 wires, items 4-10 (4 # #16 AWG) Cabled around the core with a 7 left hand lay Binder mylar tape - 25% minimum overlap Tape shield aluminum mylar tape - 25% minimum overlap Drain wire - Item 11 is pulled under the shield Jacket polythlyne - color: black Overall diameter - Ø.600 MAX SPECIFICATIONS Temperature rating 55 C to +80 C Voltage rating 600 VRMS (Conductors 2500 VRMS for electronic use) Insulated conductors UL1015 CSA TRE2 IPCEA S Cable UL2653 CSA TR32 IPCEA S Voltage testing Finished cable tested at 2000 VRMS between every two conductors and between each conductor and the shield. 100% test. CONDUCTORS ITEM NO. WIRE INSULATION NOM. DIA. SIZE STRANDS/AWG MATERIAL COLOR MATERIAL 4 14 AWG 19/25 COPPER BLACK TYPE B P.V.C. 600V Ø AWG 19/25 COPPER WHITE TYPE B P.V.C. 600V Ø AWG 19/25 COPPER RED TYPE B P.V.C. 600V Ø AWG 19/27 COPPER ORANGE TYPE B P.V.C. 600V Ø AWG 19/27 COPPER YELLOW TYPE B P.V.C. 600V Ø AWG 19/27 COPPER GREEN TYPE B P.V.C. 600V Ø AWG 19/29 COPPER VIOLET TYPE B P.V.C. 600V Ø AWG 19/29 TINNED COPPER BARE DRAIN WIRE 36 HUGHEYANDPHILLIPS.COM

37 CABLES FILLER JACKET TAPE SHIELD BINDER TAPE Ø.565 ±.03 ASSEMBLY Cabling - Core- filler, as required to maintain a circular cross section Outer Layer - 6 wires, items 1-6 (2 # # #18 AWG) Cabled around the core with a 7 left hand lay Binder - overall clear polyster. 100% coverage Tape shield - overall aluminum mylar foil 100% coverage - 20% overlap Drain wire - Item 7 is 18 AWG 16 strand tinned copper Jacket - UV inhibiting polyvinyl chloride (PVC) Overall diameter - Ø.565 ±.03 SPECIFICATIONS Temperature rating 43 C to +80 C stationary 55 C to +80 C Voltage rating 600 VRMS (Conductors 2500 VRMS for electronic use) Insulated conductors CSA AWM 1/11 6DOV FTA ICEA S Cable UL. standard Type VNTC. CSA FT4 nec 340. Sunlight resistant jacket 600 V rated Voltage testing Finished cable tested at 2000 VRMS between every two conductors and between each conductor and the shield. 100% test. CONDUCTORS ITEM NO. WIRE INSULATION NOM. DIA. PRIMARY SECONDARY SIZE STRANDS/AWG STRANDS/AWG MATERIAL COLOR MATERIAL 1 10 AWG 37/26 104/30 TINNED COPPER RED (PVC).020 NOM. WALL NYLON.005 NDM WALL Ø AWG 37/26 104/30 TINNED COPPER BROWN (PVC).020 NOM. WALL NYLON.005 NDM WALL Ø AWG 19/25 65/30 TINNED COPPER BLUE (PVC).015 NOM. WALL NYLON.005 NDM WALL Ø AWG 16/30 16/30 TINNED COPPER GRAY (PVC).015 NOM. WALL NYLON.005 NDM WALL Ø AWG 16/30 16/30 TINNED COPPER WHITE (PVC).015 NOM. WALL NYLON.005 NDM WALL Ø AWG 19/25 65/30 TINNED COPPER BLACK (PVC).015 NOM. WALL NYLON.005 NDM WALL Ø AWG 16/30 16/30 TINNED COPPER BARE DRAIN WIRE Toll Free 37

38 CABLES Cable ALUMINUM MYLAR SHIELD BINDER TAPE JACKET FILLER ASSEMBLY Cabling - Core-minimum filler to keep as flexible as practical Outer Layer - 10 wires, items 1-10 (3 # # #16 AWG) Cabled around the core with a 7 left hand lay Binder mylar tape - 25% minimum overlap Tape shield aluminum mylar tape - 25% minimum overlap Drain wire - Item 11 is pulled under the shield Jacket - UV inhibiting polyvinyl chloride (PVC) Black nominal wall Overall diameter - Ø.665 ± 0.3 SPECIFICATIONS Temperature rating 55 C to +80 C Voltage rating 600 VRMS (Conductors 2500 VRMS for electronic use) Insulated conductors UL1015 CSA TRE2 IPCEA S Cable UL2653 CSA TR32 IPCEA S Voltage testing Finished cable tested at 2000 VRMS between every two conductors and between each conductor and the shield. 100% test. CONDUCTORS ITEM NO. WIRE INSULATION NOM. DIA. SIZE STRANDS/AWG MATERIAL COLOR MATERIAL 1 12 AWG 19/25 COPPER BLACK P.V.C. 600V Ø AWG 19/25 COPPER WHITE P.V.C. 600V Ø AWG 19/25 COPPER GREEN P.V.C. 600V Ø AWG 19/27 COPPER BLACK P.V.C. 600V Ø AWG 19/27 COPPER WHITE P.V.C. 600V Ø AWG 19/27 COPPER RED P.V.C. 600V Ø AWG 19/27 COPPER ORANGE P.V.C. 600V Ø AWG 19/29 COPPER YELLOW P.V.C. 600V Ø AWG 19/29 COPPER GREEN P.V.C. 600V Ø AWG 19/29 COPPER VIOLET P.V.C. 600V Ø AWG 16/30 TINNED COPPER bare DRAIN WIRE 38 HUGHEYANDPHILLIPS.COM

39 CABLES WC23012CLOT WC23012DLOT Type TC-Control or Instrumentation Cable PVC/Nylon Insulation with Overall PVC Jacket Cabling Three or more conductors are assembled round with fillers as needed. A nylon rip cord is inserted under the jacket for ease of stripping. Two conductors are assembled flat parallel (round, with fillers as needed, is available upon request). Overall Jacket Gas/vapor-tight Polyvinyl Chloride (black) UL1277 table 10.1 Thickness Specified herein Color Coding ICEA Method 3 Table K-2, except colors and numbers are printed on solid base colors for easy identification. Cable Identification Sizes 18 and 16 AWG Ink print on one side of jacket (size) AWG Type TC 90 C dry 75 C wet Sunlight Resistant 600V A.I.W. Corp. (UL) Direct Burial Indent print on other side of jacket (number of conductors) Sizes 14, 12, and 10 AWG Ink print on one side of jacket (size) AWG Type TC THHN or THWN cdrs. Sunlight Resistant 600V A.I.W. Corp. (UL) Direct Burial Indent print on other side of jacket (number of conductors) Construction Options Consult factory for cable specifications with appropriate shields. Cables made per Dupont Spec. SE-33.4B also available. Scope This specification covers multiconductor cables having VW-1 TFFN or THHN/THWN (PVC/Nylon) conductors with an overall gas/ vapor-tight polyvinyl chloride (PVC) jacket, conforming to Article 318 Cable Trays and Article 340 Power and Control Cable Type TC of the 1996 National Electrical Code, and Standard 1277 of Underwriters Laboratories, Inc. Meets the requirements of ICEA T and T flame tests as well as the 70,000 BTU Cable Tray Propagation Test per IEEE-383 and shows reserve capabilities by also pass the 210,000 BTU flame test. Rated 600 volts, 90 C dry and 75 wet. UL file no. E Also meets FT4/IEEE ,000 BTU test. SPECIFICATIONS UL listed and OSHA acceptable. Recognized for use in Class 1 or 2, Division 2 hazardous locations and for installation in trays, wireways, troughs, channels, ducts and conduit. Specifically approved for direct burial, wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required. Designed for control, power, lighting, telemetering, signals and relay or traffic control. Construction Conductors Bare soft annealed copper per ASTM B-3 Sizes 18 and 16 AWG (TFFN) Bunch stranded. Size 18 (16/.010 ) and Size 16 (19/.0117 ) UL-62 paragraph 10.2 Sizes 14, 12 and 10 AWG (THHN/THWN) Concentric stranded, class B (7 strands) ASTM B-8 and UL-83 table 13.1 Insulation High dieletric polyvinyl chloride UL-1581 table (THWN 75 C) UL-1581 table (THHN 90 C) UL-1581 table Class 12B (TFFN 90 C) Thickness UL-83 table 15.5 for THHN/THWN UL-62 table 6.2 for TFFN Insulation Armor Nylon UL-83 paragraph 25.1 for THHN/THWN UL-62 paragraph 22.1 for TFFN Thickness UL-83 table 15.5 for THHN/THWN UL-62 paragraph 26.4 for TFFN Toll Free 39

40

41 DIAGRAMS

42 DIAGRAMS 9LCA001000AS INCOMING POWER SEE NOTE 1. NEUTRAL GROUND LINE PHOTOCELL RED PHOTOCELL BLACK TOWER NEUTRAL OBSTRUCTION LIGHTS ( W 120V LAMPS) Product # Description PART # AC Alarm Card, 120V, SL B b7c51paa CB1 circuit Breaker, 15A EB152771CMDW F1 Fuse, 7 Amp (some models, replaces CB1) FUFNM70G251 MC Master Card w/photocell B b7c14raa MV1-2 Metal Oxide Varistor, 150V 80 Joules MV150LA20 MV3 Metal Oxide Varistor, 24V 4 Joules MV24ZA4 SW1 Day/Night/Auto Switch SZ AK TB1-E Terminal Block End (1 total) tbe230aa TB1-S Terminal Block Section (4 total) tbs213aa01a TBP Photocell Terminal Block, 2 Position tb02b038a07a 9LCA111L00AS GROUND NEUTRAL LINE TOWER GROUND BEACON (2 620W 120V LAMPS) OBS. LIGHTS ( W 120V LAMPS) LOAD BALANCE RESISTOR TOWER NEUTRAL Product # Description PART # AC Alarm Card, 120V, BCN-SL B b7c21paa CB1-3 Circuit Breaker, 15A EB152771CMDW FBP Flasher By-Pass Card, 120V B b7c31paa K1 Relay, 12V Coil, 20 A, DPDT KA120DV2022C K2-4 Solid State Relay, NO, 40A KR241DV4011R MC Master Card w/photocell B b7c11raa MV1-4 Metal Oxide Varistor, 150V 80 Joules MV150LA20 MV5 Metal Oxide Varistor, 24V 4 Joules MV24ZA4 SW1 Day/Night/Auto Switch SZ AK TB1/2-E Terminal Block End (2 total) tbe230aa TB1/2-S Terminal Block Section (9 total) tbs213aa01a TBP Photocell Terminal Block, 2 Position tb02b038a07a 9LCD111000AS INPUT POWER GROUND NEUTRAL LINE TOWER GOUND STROBE LINE PHOTO LINE TOWER NEUTRAL PHOTOCELL RED BLACK Product # Description PART # AC Alarm Card, 120V, Strobe B b7c26paa CB1 circuit Breaker, 15A EB152771CMDW K1 Solid State Relay, NO, 40A KR241DV4011R MC Master Card w/photocell B b7c12raa MV1-3 Metal Oxide Varistor, 150V 80J MV150LA20 MV4 Metal Oxide Varistor, 24V 4J MV24ZA4 SW1 Day/Night/Auto Switch SZ AK TB1/2-E Terminal Block End (2 total) tbe230aa TB1/2-S Terminal Block Section (8 total) tbs213aa01a TBP Photocell Terminal Block, 2 Position tb02b038a07a K1 42 HUGHEYANDPHILLIPS.COM

43 DIAGRAMS 9LCA233L00AS LINE 1 LINE 2 INCOMING GROUND INCOMING NEUTRAL TOWER NEUTRAL TOWER GROUND BEACON 1 (2 620W 120V LAMPS) BEACON 2 (2 620W 120V LAMPS) BEACON 3 (2 620W 120V LAMPS) LOAD BALANCE RESISTOR 1 LOAD BALANCE RESISTOR 2 LOAD BALANCE RESISTOR 3 OBS LIGHT LEVEL 1 ( W 120V LAMPS) OBS LIGHT LEVEL 2 ( W 120V LAMPS) TOWER GROUND Product # Description PART # AC1 Alarm Card, 120V, BCN-BCN-BCN B b7c24paa AC2 Alarm Card, 120V, SL-SL b7c23paa CB1-8 Circuit Breaker, 15A EB152771CMDW FAN Fan, 120V A6A1010AF2 FBP1-3 Flasher By-Pass Card, 120V B b7c31paa K1-3 Relay, 12V Coil, 20 A, DPDT KA120DV2022C K4-12 Solid State Relay, NO, 40A KR241DV4011R MC Master Card w/photocell B b7c11raa MV1-8 Metal Oxide Varistor, 150V 80 Joules MV150LA20 MV9 Metal Oxide Varistor, 24V 4 Joules MV24ZA4 PHOTOCELL BLACK AND RED SW1 Day/Night/Auto Switch SZ AK TB1/2-E Terminal Block End (2 total) tbe230aa TB1/2-S Terminal Block Section (9 total) tbs213aa01a TB1-NE Terminal Block End White, Large(1 total) TBE830AA TB1-NS Terminal Block Section White, large (2 total) TBS824AA01A TBP Photocell Terminal Block, 2 Position tb02b038a07a 9LCE233L0BAS Product # Description PART # AC1 Alarm Card, 120V, OB-OB B b7c23paa AC2 Alarm Card, 120V, BCN-BCN-BCN B b7c24paa AC3 Alarm Card, 120V, ST-ST-ST B b7c28paa BC backup Card, 120V B b7c41paa CB1-1 Circuit Breaker, 15A EB152771CMDW FAN cooling Fan, 120V A6A1010AF2 FB1-3 Flasher By-Pass Card, 120V B b7c31paa K1-3 Relay, 12V Coil, 20 A, DPDT KA120DV2022C K4-12 Solid State Relay, NO, 40A KR241DV4011R K13 Relay, 120V Coil, DP3T KA121AV0532C MC Master Card w/photocell B b7c13raa MV1-12 Metal Oxide Varistor, 150V 80 Joules MV150LA20 MV13 Metal Oxide Varistor, 24V 4 Joules MV24ZA4 SW1 Day/Night/Auto Switch SZ AK SYNC Strobe Sync Card B b6a1101pcb4b TB1/2-E Terminal Block End (2 total) tbe230aa TB1/2-S Terminal Block Section (18 total) tbs213aa01a TBN-E Large Terminal Block End (2 total) tbe830aa TBN-S Large Terminal Block Section (18 total) tbs824aa01a TBP Photocell Terminal Block, 2 Position tb02b038a07a Toll Free 43

44 DIAGRAMS 9LCE111L0BAS GROUND NEUTRAL LINE TOWER GROUND BEACON (2 620W 120V LAMPS OBS. LIGHTS ( W 120V LAMPS MEDIUM INTENSITY STROBE LOAD BALANCE RESISTOR PHOTO/HEATER LINE TOWER NEUTRAL Product # Description PART # AC Alarm Card, 120V, BCN-OB-ST B b7c25paa BC backup Card, 120V B b7c41paa CB1-4 Circuit Breaker, 15A EB152771CMDW FBP Flasher By-Pass Card, 120V B b7c31paa K1 Relay, 12V Coil, 20 A, DPDT KA120DV2022C K2-4 Solid State Relay, NO, 40A KR241DV4011R K5 Relay, 120V Coil, DPDT KA121AV0522C MC Master Card w/photocell B b7c13raa MV1-5 Metal Oxide Varistor, 150V 80 Joules MV150LA20 MV6 Metal Oxide Varistor, 24V 4 Joules MV24ZA4 SW1 Day/Night/Auto Switch SZ AK TB1/2-E Terminal Block End (2 total) tbe230aa TB1/2-S Terminal Block Section (9 total) tbs213aa01a TBP Photocell Terminal Block, 2 Position tb02b038a07a RED BLACK PHOTOCELL FG2000/2000B Product # Description PART # FH1 Flashhead Complete, FG2000 (white) * E FH1 Flashhead Complete, FG2009 (red) * E FH1 Flashhead Complete, FG2000B (white) * W FH1 Flashhead Complete, FG2009B (red) * R FT1 Flashtube Assembly 12S00602 B1 base Assembly (w/gasket & lens holders) * G1 Lens Gasket, 14 AS568A-383 G2 Lower Cover Gasket, 11.5 AS568A-380 GL1 globe Assembly, FG2000 (white) * GL1 globe Assembly, FG2009 & FG2009B (red) * GL1 globe Assembly, FG2000B (white) * IC1-2 Insulator Cups * FH1-6 Flashtube Holder * S1 interlock Switch * TB1 terminal Block Assembly * T1 trigger Transformer * W FG3000/3000B Product # Description PART # FH1 Flashhead Complete, FG3000 * E FH1 Flashhead Complete, FG3000B * RW FT1-2 Flashtube Assembly 12S00602 B1 base Assembly (w/gasket & globe holders) * G1 Lens Gasket, 14 AS568A-383 G2 Lower Cover Gasket, 11.5 AS568A-380 GL1 globe Assembly, FG3000 * GL1 globe Assembly, FG3000B * ICL insulator Cup, Lower * ICU insulator Cup, Upper * FTH Flashtube Holder * S1 interlock Switch * TB1 terminal Block Assembly * K1 Trigger Transformer relay (FG3000 only) * T1 trigger Transformer, White * W 44 HUGHEYANDPHILLIPS.COM T2 trigger Transformer, Red * R

45 DIAGRAMS FG2000 Product # Description PART # C1 capacitor, Resonating, 4uF * C2 capacitor, Day, 70uF * C3 capacitor, Night, 5uF * DB1 Diode Board * E1 Stainless Steel Enclosure, FG2000/3000 * F1 input Power Fuse, 4Amp *DP-1020 HV high Voltage Board * K1-2 Interlock & Day/Night Relay * MB1 Mother Board * PC Photocell * PC1 Photocell w/socket * PCA PS1 FlashGuard 2000 PS, 120V 60Hz * A PS2 FlashGuard 2000B PS, 230V 50Hz * A R1 Power Resistor, 50ohm, 55Watt * R2-4 Power Resistor, 20ohm, 40Watt * S1 interlock Switch * S2 interlock Switch Assembly * SM1 Sync Monitor Board * T1 Power Transformer, 120/240V 60Hz * T1 Power Transformer, 240/480V 60Hz * T1 Power Transformer, 240/480V 50Hz * C T2 current Sense Transformer TC1 trigger Control Board * TF1 transformer Fuse, 630mA *DP-1019 FG2000B AOL Product # Description PART # C1 capacitor, Resonating, 4uF * C2 capacitor, Day, 70uF * C3 capacitor, Night, 5uF C ca505b661cdg DB1 Diode Board * SW1: AUTO-RESET TEST BUTTON HIGH VOLTAGE INDICATOR DS1 DCC Digital Controller Board E1 Stainless Steel Enclosure F1-F2 Input Power Fuse, 6Amp * HV high Voltage/Trigger Board 34E K1-2 Interlock & Day/Night Relay * MB1 Mother Board * R1 Power Resistor, 50ohm, 55Watt * R2-4 Power Resistor, 20ohm, 40Watt * DS1: LOGIC POWER (RED) DS2: FLASH STATUS (YELLOW) DS3: COMMUNICATION STATUS GREEN R5 Power Resistor, 1.5kohm, 50Watt RW S1 interlock Switch Assembly * T1 Power Transformer, 240/480V 60Hz * T2 current Sense Transformer T3 trigger Line Driver Board * T4 Logic Transformer T tp T5 Power Line Transformer 1A91324H34 TF1 transformer Fuse, 630mA *DP Toll Free 45

46 DIAGRAMS FG3003 Product # Description PART # C1 capacitor, Resonating, 3uF * C2 capacitor, Day, 40uF * C3 capacitor, Night, 7uF * CNV1 DC-DC Converter, 24VDC-1000VDC * DB1 Diode Board * E1 Stainless Steel Enclosure * F1,F3 Input Power/Sidelight Fuse, 12Amp * HV high Voltage Circuit Card * K1-2 Interlock & Day/Night Relay * MB1 Mother Board * PC Photocell w/21 cable 12H00107 PS1 FlashGuard 3000 Power Supply, 24VDC * L R2-4 Power Resistor, 20ohm, 40Watt * S1 interlock Switch * SL1 Photocontroller/Sidelight Monitor Assembly 12H SM1 Sync Monitor Board * SW1 Interlock Switch Assembly * DC T2 current Sense Transformer TB2 terminal Block Assembly * TC1 trigger Control Board * FG2000B Product # Description PART # C1 capacitor, Resonating, 4uF * C2 capacitor, Day, 70uF * C3 capacitor, Night, 5uF C ca505b661cdg DB1 Diode Board * DCC Digital Controller Board E1 Stainless Steel Enclosure F1-F2 Input Power Fuse, 6Amp * HV high Voltage/Trigger Board 34E K1-2 Interlock & Day/Night Relay * MB1 Mother Board * R1 Power Resistor, 50ohm, 55Watt * R2-4 Power Resistor, 20ohm, 40Watt * R5 Power Resistor, 1.5kohm, 50Watt RW S1 interlock Switch Assembly * T1 Power Transformer, 240/480V 60Hz * T2 current Sense Transformer T3 trigger Line Driver Board * T4 Logic Transformer T tp T5 Power Line Transformer 1A91324H34 TF1 transformer Fuse, 630mA *DP HUGHEYANDPHILLIPS.COM

47 DIAGRAMS FG2009 FG2009B Product # Description PART # ALN Alarm Lockout Relay Assembly, Day (not shown) 35E00101 C1 capacitor, Resonating, 3uF * C2 capacitor, Day, 40uF * C3 capacitor, Night, 7uF * DB1 Diode Board * E1 Stainless Steel Enclosure * F1 input Power Fuse, 10Amp * F3 Sidelight Fuse, 4Amp *DP-1020 HV high Voltage Board * K1-2 Interlock & Day/Night Relay * K4 Sidelight Module Sensor * K5 Sidelight Module Power Relay * MB1 Mother Board * MP1 interlock Switch Assembly * PC Photocell, Night * PC1 Photocell, Night w/socket * PCA R1 Power Resistor, 10kohm, 55Watt * R2-4 Power Resistor, 20ohm, 40Watt * S1 interlock Switch * SLM1 Sidelight Control Module (w/terminal block) * SM1 Sync Monitor Board * T1 Power Transformer, 120/240V 60Hz * C T1 Power Transformer, 240/480V 60Hz * C T1 Power Transformer, 240/480V 50Hz * C T2 current Sense Transformer Product # Description PART # C1 capacitor, Resonating, 4uF C ca505b661cdg C3 capacitor, Night, 5uF * DB1 Diode Board * E1 Stainless Steel Enclosure, FG2000B/3000B F1/F3 Input Power Fuse, 6Amp * HV high Voltage Board * K1-2 Interlock & Day/Night Relay * K4 Sidelight Power Relay KA121AV0522C MB1 Mother Board * PC Photocell * PC1 Photocell w/socket * PCA PS1 FlashGuard 2009B Power Supply, 120V 60Hz PS2 FG2009B Power Supply, 120V No Sidelight R1 Power Resistor, 50ohm, 55Watt RW50RB0500GF R2-4 Power Resistor, 20ohm, 40Watt * R5 Power Resistor, 1.5kohm, 50Watt R6-7 Power Resistor, 50kohm, 50Watt RW50RB0502GF S1 interlock Switch * S2 interlock Switch Assembly SLM1 Sidelight Control Module B b7c23paa SM1 Sync Monitor Board * T1 Power Transformer, 120/240V 60Hz * T2 current Sense Transformer TC1 trigger Control Board * TF1 transformer Fuse, 630mA *DP-1019 TB2 terminal Block Assembly * TC1 trigger Control Board * TF1 transformer Fuse, 630mA *DP Toll Free 47

48 DIAGRAMS FG3000 FG3000B Product # Description PART # C1 capacitor, Resonating, 3uF * C2 capacitor, Day, 40uF * C3 capacitor, Night, 7uF * DB1 Diode Board * E1 Stainless Steel Enclosure * F1 input Power Fuse, 10Amp * F3 Sidelight Fuse, 4Amp *DP-1020 HV high Voltage Board * K1-2 Interlock & Day/Night Relay * K4 Sidelight Module Sensor * K5 Sidelight Module Power Relay * MB1 Mother Board * MP1 interlock Switch Assembly * PC Photocell * PC1 Photocell w/socket * PCA R1 Power Resistor, 10kohm, 55Watt * R2-4 Power Resistor, 20ohm, 40Watt * S1 interlock Switch * SLM1 Sidelight Control Module (w/terminal block) * SM1 Sync Monitor Board * T1 Power Transformer, 120/240V 60Hz * C T1 Power Transformer, 240/480V 60Hz * C T1 Power Transformer, 240/480V 50Hz * C T2 current Sense Transformer TB2 terminal Block Assembly * TC1 trigger Control Board * TF1 transformer Fuse, 630mA *DP-1019 Product # Description PART # C1 capacitor, Resonating, 5uF C ca505b661cdg C2 Capacitor, Day, 70uf CA706A441EK C3 capacitor, Night, 4uF * DB1 Diode Board * E1 Stainless Steel Enclosure, FG2000B/3000B F1/F3 Input Power Fuse, 6Amp * HV high Voltage Board * K1-2 Interlock & Day/Night Relay * K3 Trigger Transformer Relay KA025DC10S2N K4 Sidelight Power Relay KA121AV0522C MB1 Mother Board * PC Photocell * PC1 Photocell w/socket * PCA PS1 FlashGuard 3000B Power Supply, 120V 60Hz R1 Power Resistor, 50ohm, 55Watt RW50RB0500GF R2-4 Power Resistor, 20ohm, 40Watt * R5 Power Resistor, 1.5kohm, 50Watt RW R6-7 Power Resistor, 50kohm, 50Watt RW50RB0502GF S1 interlock Switch * S2 Interlock Switch Assembly SLM1 Sidelight Control Module B b7c23paa SLM1 Sidelight Control Module, LED B b7c23laa-001 SM1 Sync Monitor Board * T1 Power Transformer, 120/240V 60Hz * T1 Power Transformer, 240/480V 60Hz * T1 Power Transformer, 240/480V 50Hz * T2 current Sense Transformer TC1 trigger Control Board * TF1 transformer Fuse, 630mA *DP HUGHEYANDPHILLIPS.COM

49 DIAGRAMS SS-125 SS-122 Product # Description PART # A1 high Voltage Supply Board * A2 trigger Control Board * A3 Fault Monitor Board * C1 capacitor, 1uF, 1700V * C2 capacitor, 12.5uF, 2500V * C3 capacitor, 110uF, 2500V * C4 capacitor, 3uF, 2500V * DB1 Diode Block * DS1 interlock Assembly (w/ S1-S3) * E1 Stainless Steel Enclosure, SS-125 * F1 Fuse, SB, 3.2A 480V System * F1 Fuse, SB, 6A 240V System * F1 Fuse, SB, 10A 120V System * F2-F5 Fuse, SB, 1A, 3AG * FT Flashtube Assembly * FTS Flashtube Assembly with sockets * S K1 Interlock Relay * Product # Description PART # MB Mother Board, SS-122 * A1 Sync & Timing Board * A2 Digital Monitor Board, 1-8 Lights * A3 Digital Monitor Board, 9-16 Lights * A4 Digital Monitor Board, Lights * K4-K5 Relay * K1-3, K6-K7 Relay, 3PDT * T1 Logic Transformer * T2 Power Transformer, 240/480V, 50/60Hz * T2 Power Transformer, 120/240V, 50/60Hz * T2 Power Transformer, 208/220V, 50/60Hz * F1 Fuse, SB, 10A * SS-124 Photocell Assembly PCELL Photocell Assembly, SS-124 * PR Photocell Receptacle * PN Photocell, Night * PT Photocell, Twilight * K2-K4 Mode Relays * LA Surge Arrestor * MB Mother Board * R1-R6 Resistor Block Assembly * RA Reflector Assembly * S1 interlock Switch * S2 Remote/Local Switch * S3 Mode Switch (Day, Twilight, Night) * T1 input Transformer, 60Hz * T1 input Transformer, 50Hz * T1-SB T1 Voltage Selector Block, 120V * T1-SB T1 Voltage Selector Block, 240V * T1-SB T1 Voltage Selector Block, 480V * T2 trigger Transformer Assembly * WH Wire Harness Assembly * A Toll Free 49

50 DIAGRAMS KG114F0001 LC-5000 Product # Description PART # DL Dome Lens, red, beacon SFL150 UL upper Lens, red, beacon SFL125 LL Lower Lens, red, beacon (x2) SFL100 EB Eyebolt Assembly 6A0002SAY WS Wire Set Assembly A6A0001WA UR upper Beacon Rods (x3) B b6a0002af2 LR Lower Beacon Rods (x3) A6A0002AG GS gasket Set (9 total) A6A0002AR WT Watertight Connector, 1 WT4A037050TT CB cable Assembly, #12-3C, 12 Feet A6A0001WC12 Product # Description PART # MB-1 Micro-Controller board, A MB-2 Micro-Controller board, A MB-3 Micro-Controller board, A-2/ K1-K4 Solid State Relay, 50A, NC KM121AV50D2D F1 0.1A 250V Slo-Blo Fuse F2-F5 12A 250V Slo-Blo Fuse F6 1A 250V Slo-Blo Fuse * F7, F8 5A 250V Slo-Blo Fuse F9-F11 12A 250V Slo-Blo Fuse PCELL Photocell, 120V, Night * LH Lamp, beacon, 620 Watt, 120VAC LH620120GE LH Lamp, beacon, 700 Watt, 230VAC LH700230HDT SK Socket, lamp, mogol, CSA, 2500W 240V XLFC5S300 SK Socket, lamp, mogol, 2500W 240V XL HUGHEYANDPHILLIPS.COM

51 DIAGRAMS OB20 SERIES MBC2161B45S TO PHOTOCELL SIDELIGHT FAILURE BEACON FAILURE FLASHER FAILURE LIGHTS ON POWER FAILURE COMMON Product # Description PART # CC L-810 Casting Cover, painted, double c6a0008ab2 CL Sidelight Latch Spring A6A0008AJ CS L-810 Casting, painted, single, bottom hub 15H CS L-810 Casting, painted, single, side hub C6A0005AA21 CS L-810 Casting, painted, double, bottom hub C6A0008AA21 CS L-810 Casting, painted, double, side hub C6A0022AA21 GS gasket, neoprene A6A0008AG LH Lens Holder Assembly with 7 chain B6A0008AA LP Lamp, 116W, 120V LH116120GE LP Lamp, 116W, 230V LH116230DT LS Lens, Red, fresnel, L-810 FL02B02810 LS Lens, Clear FL0CB02810 LS Lens, Yellow FL04B02810 LS Lens, Green (when lit) FL08B02810 LS Lens, Blue (when lit) FL06B02861T Product # Description PART # FB Fuse, Beacon, 15A FUKTK FR Fuse, Load Balance Resistor, 7A FUFNM70G251 FS Fuse, Sidelight, 5A FUFNM50G251 K2 Power Relay, Solid State, 30A, 120V KR241AV120NC K5 Flasher By-Pass Relay Assembly A6C0015AG KZ Beacon Flasher Assembly KZ1L1RR30A MB Mother Board D6C0015AB01 PC Photocell Assembly PA446F21BS PI-PECB Photo Control Board B b6p0004ad WH Wire Harness 6C0015AH TB1-E Terminal Block End tbe230aa TB1-S Terminal Block Section tbs213aa01a TB2-E Terminal Block End tbe330aa TB2-F Terminal Block Section tbs213aa01a TB2-S Terminal Block, Fusible tbs352aa01a LT Sidelight Latch A6A0008AD PN Sidelight Spring Pin PS D0 PR 1 to ¾ Pipe reducer PR0304B4R SS Lamp socket, porcelain, 660W, 250V XLCB4S2200 TR Transfer relay assembly with relay &sockets 6A0013SK3 TR-R Transfer Relay, 0.3A Coil 13Amp obrl Toll Free 51

52

53 Accessories

54 ACCESSORIES 9LC CONTROL SYSTEM APPLICATION 9LC series lighting controls combine the finest in digital circuitry with rugged electromechanical hardware to yield the industry s most comprehensive obstruction lighting controls. Standard models are available for all common FAA and ICAO applications. The 9LC s modular design allows for custom controls for almost any combination of flashing red beacons and sidelights. All models include a NEMA 4 outdoor housing and a calibrated photocell for automatic day/night switching. A photocell override switch is standard on all systems, facilitation troubleshooting or maintenance. All controls provide comprehensive status indicators and alarm contacts for easy connection to remote monitoring systems. Features Controls for multiple beacons flash all beacons simultaneously per FAA and ICAO specifications Lightning protection provided by: - Circuit breaker protection to all tower lighting circuits - MOV surge suppressors on all inputs, outputs, and photocell lines - Torroidal current sensors isolate tower lines from monitoring circuitry Load balance resistor capability is available Modular design allows customization for nearly any application Dozens of models already developed for control of up to 14 beacons Standard with NEMA 4 enclosures (NEMA 4X optional upgrade) Alarm Contacts / Control Status Individual alarm contacts and control status is provided for: - Control power failure - Day/night mode status - Each flashing red beacon - Each level of steady burning obstruction lights - Flasher by-pass alarm/status for each beacon Number of lamps being monitored can easily changed by setting dip-switches Bi-color red/green LED status indicators provide instant indication of alarm and control status Normally open and normally closed alarm contacts are both available Primary and auxiliary alarm contacts provided Lighting Structure Input VoltagE Sidelight LBR Model # System Type Height (50/60Hz) Beacons Strobes Levels Capability 9LCA001000AA FAA A-0 Incandescent V 0 1 no 9LCA111L00AA FAA A-1 Incandescent V 1 1 Yes 9LCA233L00AA FAA A-2 Incandescent V 3 2 Yes 9LCA354L10AA FAA A-3 Incandescent V 5 3 Yes 9LCA474L10AA FAA A-4 Incandescent V 7 4 Yes 9LCD111000AA FAA D-1 Strobe V 1 no 9LCD231000AA FAA D-2 Strobe V 3 no 9LCE111L0BAA FAA E-1 inc/strobe V 1 1 Yes 9LCE233L0BAA FAA E-2 inc/strobe V 3 3 Yes 9LCIA06000AA ICAO A-0 Incandescent V 1 no 9LCIB16L00AA ICAO A-1 Incandescent V 1 1 Yes 9LCIB26L00AA ICAO A-2 Incandescent V 2 1 Yes 9LCIC16L00AA ICAO A-1 Incandescent V 1 2 Yes 9LCID16L00AA ICAO A-1 Incandescent V 1 3 Yes 9LCR001000AA FAA A-0 LED V 1 no 9LCR111000AA FAA A-1 LED V 1 1 no 9LCR231000AA FAA A-2 LED V 3 2 no 9LCR354000AA FAA A-3 LED V 5 3 no 54 HUGHEYANDPHILLIPS.COM

55 ACCESSORIES APPLICATION The LC-5000 series lighting controls combine the finest in digital circuitry with rugged microprocessor based hardware to yield the industry s most comprehensive obstruction lighting controller. The LC-5000 design allows for quick installation. The auto-configure design will evaluate the lighting on the tower and configure itself to operate and monitor installed lighting. All models include a NEMA 4 outdoor housing and a calibrated photocell for automatic day/night switching. A photocell override switch is standard on all systems, facilitation troubleshooting or maintenance. All controls provide comprehensive status indicators and alarm contacts for easy connection to remote monitoring systems. LC-5000 Red Lighting Controller Features Controls for multiple beacons flash all beacons simultaneously per FAA and ICAO specifications Lightning protection provided by: Circuit breaker protection to all tower lighting circuits MOV surge suppressors on all inputs, outputs, and photocell lines Torroidal current sensors isolate tower lines from monitoring circuitry Diagnostic LED Tree provides instant verification of beacons and sidelights Modular design allows customization for nearly any application Dozens of models already developed for control of up to 14 beacons Standard with NEMA 4 enclosures (NEMA 4X optional upgrade) Alarm Contacts / Control Status Bi-color red/green LED status indicators provide instant indication of alarm and control status Normally open and normally closed alarm contacts are both available Primary and auxiliary alarm contacts provided dimensional diagrams SIDE VIEW FRONT VIEW Environmental Temperature -55 C to +55 C, -67 F to F Humidity 95% relative humidity Will withstand exposure to: Wind-blown rain from any angle Wind speed of 240kph (150mph) NEMA Rating NEMA 4 Weight 10 lbs. model Numbers system type input voltage LC Incandescent or LED A-O 120V or 240V LC Incandescent or LED A-O or A-1 120V or 240V LC Incandescent or LED A-O or A-1 or A-2 120V or 240V Toll Free 55

56 ACCESSORIES Lightning Surge Protection Device - LSPD-3000B APPLICATION LSPD devices are designed to protect all the FlashGuard TM medium intensity strobe lighting systems. The LSPD provides both a grounding solution and surge suppression for these installations. The LSPD minimizes exposure to lightning damage through tower light wiring, a lightning path that is commonly overlooked at communications sites. Without the use of a LSPD, the interconnecting cable between the strobe s flashhead and the power supply provides a direct path that can allow damaging surges and transients to enter the shelter. Sites with LSPDs installed have proven reliability. Sites with previous lightning problems have recorded hundreds of lightning strikes after LSPD installation, with no damage to the power supply or communication equipment. Installation LSPD units are installed between the flashhead and the power supply, providing protection for both the lighting power supply and the telecommunications equipment installed at the site. The LSPD units are supplied in a fiberglass NEMA 4X outdoor enclosure. The protectors should be mounted on the tower above the ice bridge, before the cable turns to enter the shelter. The first level of protection forces any induced voltage on the cable s shield to tower ground. All lines then pass through a surge suppression device before continuing to the power supply. Detailed installation instructions are included with each unit and should be adhered to for optimum protection. FAA Type: L-864 Medium Intensity Lighting ICAO Type: Medium Intensity Type B (L-864) Compliant to: Canadian Aviation Regulation (CAR) DGAC of Mexico ICAO Annex 14, CAR Specifications: Response Time Current Withstand Circuitry Less than 5 µs. 40 ka per mode; IEEE C x20µs short circuit waveform the LSPD is series wired with parallel protection. Robust MOVs protect all circuits. Large ground plane bonded to a #2 copper ground lug provides a strong electrical/ mechanical discharge point. SERIES 800 PhotoController & Beacon Flasher application The Hughey & Phillips SERIES 800 PhotoController and Beacon Flasher provides a low cost, high reliability solution to your lighting needs. This unalarmed system allows for the user to add an inline system to their conduit run on the tower to controller the installed FAA beacons and sidelights. The systems are factory calibrated and never need adjustment. Each system utilizes surge and transient components and additional input line protection. Normally closed solid state relay configuration assures Lights ON condition even if the circuitry fails. Red LED provides quick visual verification of field operation. And with its modular design, it allows for quick field installation or retrofit to existing system if ever damaged. model Numbers S800PC120 S800PC240 S800BF120 S800BF240 Description Photo Controller, 120VAC Photo Controller, 240VAC Beacon Flasher, 120VAC Beacon Flasher, 240VAC Spare Parts Hughey & Phillips is the OEM for all your needs Flashtubes Cables Wire Harnesses Junction Boxes Lamps Relays Capacitors Lightning Rods Transformers Ice Shields Brackets 56 HUGHEYANDPHILLIPS.COM

57 ACCESSORIES APPLICATION Combining technology with ease-of-use, Hughey & Phillips third-generation GPS unit combines flash synchronization and day-night sensing, and can be installed with just one plug-in cable. This eliminates the need to mount a separate GPS unit, antenna, junction box and wiring. Reliable, glitch-free operation is assured, using a crystal and the 50/60Hz power line as a zero-drift timing reference if the satellite signal is momentarily lost. And two different flash modes are provided: fixed 40FPM or bit-switch selectable 24, 30, 40 or 60 FPM. The unit easily mounts with four screws to any surface, or pole mount using the optional bracket. Installation interconnect cable with quick connect plugs from GPS unit to controller unit. LEDs indicate Power, Sync and GPS Lock status. With rugged metal weatherproof and a battery-free design, Hughey & Phillips GPS unit will provide years of reliable service for your wind farm. GPS SYNC / Photocell Module FAA Advisory Circular AC 150/ F Canadian Aviation Regulation ICAO Annex 14, MIL-C-7989, DGAC of Mexico Specifications Specifications Input Voltage VAC 50/60Hz, 10W max. External Dimensions 6-1/4 x 6-1/4 x 4-1/8 Enclosure NEMA 4 Painted Aluminum Mounting Dimensions 5-1/8 x 6-3/4 Operation Temperature -40 to +55 C (4) #8 Holes Indicators Power (Green) GPS Lock (Yellow) Optional Mounting 1-1/4 to 2-3/4 Pole SYNC (Flashing Red) bracket SYNC Output 15-27VDC, 100mA, 3ms pulse SYNC Adjustments Day: 40FPM night: 24, 30, 40, 60 FPM Backup SYnc internal Crystal Clock or AC Line Part NumbERS Part Numbers gps SYNC Module gps Cable, 100 * Photocell, 120V, ft-cd gps Cable, gps Cable, gps Cable, GPS Cable, Pole Mounting Kit Toll Free 57

58 ACCESSORIES Lightning Rod Assembly Mounting Bracket for Dual Lighting Part # KG 0926M001 MOUNTING RING LIGHTNING ROD JAM NUT BEACON Application The Lightning Rod Assembly, LRB58L7510M, is designed for, and is widely used on antenna towers associated with microwave relay installations, high-definition broadcast towers, and other structures prone to lightning strikes. Consisting of a 7/8 diameter rod and a base mounting ring designed for ready installation under existing medium intensity lighting fixtures with a 13-1/4 bolt hole pattern. The A6A0302AB Lightning Rod extends approximately two feet above a standard 300mm code beacon in order to reduce the probability that lightning will strike the lighting fixture. This will minimize the possibility of damage to the lighting fixture and the wiring from cloud to ground lightning strikes STROBE TOWER DOUBLE BEACON/ STROBE Ease of Installation The base mounting ring is designed for installation underneath the base of a medium intensity lighting fixture with a 13-1/4 bolt hole pattern without requiring additional holes in the tower. It is only necessary to remove two of the four mounting bolts in order to install the ring under the existing fixture. The other two beacon mounting bolts must be loosened sufficiently to enable the installer to slide the lightning rod mounting ring under the fixture. Slotted holes are provided in the base mounting ring in order that the ring may be rotated to avoid interference with the tower bolts or details. The mounting ring should be positioned so that the rod is located at either side of the fixture in order to avoid interference during opening of the fixture for maintenance. General The base mounting ring is an aluminum casting, tapped to accept the threaded rod. The rod is fabricated from 7/8 diameter material threaded at one end for insertion into the mounting ring. The rod is specially treated after fabrication to withstand weathering Part Numbers: BEACON/STROBE MOUNTING BRACKET Mounting bracket will accommodate vertical tower members from 1.5 to 4.5 in diameter. Standard U bolts are used to secure the bracket to the tower. SUPPORT ANGLE TOWER LEG U BOLTS Strobe Mounting Bracket For: 1. Model KG114 - Red Beacon 2. Model KG225 - Strobe 3. Model FG Strobe 4. Model FG Strobe Material: galvanized steel BEACON/STROBE ICE SHIELD ASSEMBLY To mount beacon or strobe to the bracket, use H&P mounting assembly Part Number A6A0001SE EXPANDED METAL PARTIALLY OMMITTED FOR CLARITY OR ILLUSTRATION LRB58L7510M A6A0302A13 A6A0302AA2 NH7510CB2 Lightning Rod Assembly Lightning Rod Mounting Ring Jam Nut SUPPORT ANGLE SECURING BRACKET 58 HUGHEYANDPHILLIPS.COM

59 ACCESSORIES Load Balance Resistor LB V, 1200W Application The proper operation of electrical and electronic devices in general is based on the availability of a relatively steady line voltage. This condition is usually met without special precaution when the several connected loads all consume a steady amount of power. If one or more of the loads are of a varying or pulsating nature, then the degree of steadiness of the line voltage (i.e. line voltage regulation) will be dependent upon several factors such as: The voltage regulation of the power service to the installation (i.e. is the power service a firm-heavy source with adequate capacity or a soft source at the end of a rural line). The size of the conductors between the power service and the connected load. In many cases the size is not adequate for the load, thus causing a large voltage drop. The size and voltage regulation of the standby generator. The relative size of the pulsating load as related to the total connected load at site. Also of prime importance is the relative sensitivity of the electronic or radio equipment to the variations in the line voltage. The rules of the FCC and FAA require the 300mm Beacon to flash ON and OFF at a rate between 20 and 40 flashes per minute. The beacon normally uses two 620 watt lamps, thus a pulsating load of 1240 watts. Assuming a rate of 30 FPM, the 1240 watt load is ON for 1-1/3 seconds and OFF for 2/3 seconds. Due to some inrush current when the lamps are ON, the effect on the line voltage may be slightly more severe than flashing a resistive load of 1240 watts. In some installations, the 1240 watt pulsating load may represent a substantial portion of the total connected load. In these cases the variations in the line voltage may be quite severe and some corrective means must be considered. Fortunately, a relatively simple and quite effective corrective means is available a Load Balance Resistor. This consists of a 1200 watt resistive load which is switched ON as the Beacon load is switched OFF and vice versa. The Hughey and Phillips LB and LB Load Balance Resistors (LBR) are designed for use with flashing Beacons and will minimize fluctuations in the beacon lighting load circuit, when used is conjunction with our 9LC Lighting Controls. Housed in a louvered galvanized steel case, the LBR is suitable for outdoor installations. The mounting brackets are movable in order to provide for mounting against a vertical or horizontal surface. Connection to the LBR is made to a terminal strip mounted in a watertight cast junction box which is tapped for ½ conduit or conduit fitting. The resistive elements are of the strip type to provide uniform heat distribution and are of steel-sheath construction with compressed insulation. SiteGuard WC-60 Wireless Monitoring Hughey & Phillips Digital Cellular Communicators deliver secure, reliable and complementary digital communications via the GSM (Global System for Mobile) network. This groundbreaking communications solution offers full data reporting and uploading/downloading with most Hughey & Phillips control panels. In addition, with onboard zone inputs and optional dialer capture capability, we re compatible with other manufacturers security panels as well. All signals are delivered to the AlarmNet Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery. SiteGuard monitoring services handles all of the time dependent monitoring tasks without requiring your interaction: if a light burns out, Hughey & Phillips s system does the following: Dry contact output is read into the SiteGuard System SiteGuard initiates alarm call over a GSM wireless connection Alarm received at ProtectionNet Network operations center, with operators providing around the clock, 365 days a year service ProtectionNet initiates an FAA Notice to Airmen (NOTAM) for any appropriate lighting failure The client is notified of the failure via telephone, voic , pager, fax or With the NOTAM in place, you can now work at your own schedule to repair the light outage If after 14 days we have not heard from you, we will contact you to determine the status of your tower We will file the NOTAM extension if necessary or we will remove the NOTAM, with no additional work from you Part Numbers: OBMISC215 Digital Cellular Communicator (SiteGuard WC-60) OBMISC236 GSM Antenna, outdoor, GSM-ANT3DB, omni-directional SMISC234 GSM Adapter Cable, WA7626-CA SMA to N Adapter MC GSM Coaxil Cable, 25 Wind Turbine Switch The Hughey & Phillips Wind Turbine Switch (WTS) is designed to operate the required obstruction lighting from either the high voltage generated by the wind turbine within the nacelle or from the commercial power supplied at the base of the tower. Utilizing patent-pending technology, the WTS senses the highest voltage present and powers the obstruction lighting at either 120VAC or 230VAC. The WTS harnesses the power of wind to power your obstruction lighting requirements Toll Free 59

60 ACCESSORIES junction boxes Weathertight Cast Aluminum for Surface Mounting General Information Hughey & Phillips Weathertight Junction Boxes are of cast aluminum. Each box is of adequate size for the number of terminals to enable proper and simplified installation. All boxes are furnished complete with cover, gasket, cover retaining chain and self-retaining type cover screws. Tapping - Hughey & Phillips Weathertight Junction Boxes are available with or without tapped conduit hubs. In ordering, specify size. Terminals - Hughey & Phillips Weathertight Junction Boxes are available with standard screw type terminal blocks, or special blocks with split connectors, or combinations, to customer order. The terminal capacity indicated under each type of box is representative of one type terminal block all terminal strips are insulated. Insulated Cable Supports - Hughey & Phillips Weathertight Junction Boxes are available with built-in cable support (with or without terminals) to meet requirements of the National Electric Code. Insulated Bushing - Hughey & Phillips will install, when specified, plastic insulating bushings inside of tapped conduit hubs. Junction Box No. JB Junction Box No. JC Description Cast aluminum, watertight, complete with cover and screws, gasket, and cover retaining chain. Available with or without terminal block, and/or cable support. Specifications Inside Dim. (Approx.) 5 3/8 Dia. 2 5/8 Depth Capacity 5 Term. (Kulka No ) 7 Term. (Buchanan Type HD) Max. Hub Tap 1 Cond. Size Description Cast aluminum, watertight, complete with cover and screws, gasket, and cover retaining chain. Available with or without terminal block, and/or cable support. Specifications Inside Dim. (Approx.) L 4 7 / 8, W 7, D 4 Capacity 8 Term. (Kulka No ) 10 Term. (Buchanan Type HD) Max. Hub Tap 1 Cond. Size 60 HUGHEYANDPHILLIPS.COM

61 ACCESSORIES junction boxes Weathertight Cast Aluminum for Surface Mounting Junction Box No. JF Junction Box No. JG Description Cast aluminum, watertight, complete with cover, cover screws, gasket, and cover retaining chain. Available with or without terminal blocks, and/or cable support, screw-cap receptacles, etc. Furnished with mounting bars or mounting clamps, if specified on order. Specifications Inside Dim. (Approx.) L 10, W 9, D 5 Capacity 20 Term. (2-Kulka No ) 24 Term. (Buchanan Type HD) **Max. Hub Tap Sides (R, L**) 1 Top & Bottom (T, B**) 2 Cond. Size Description Cast aluminum, watertight, complete with cover, cover screws, gasket, and cover retaining chain. Available with or without terminal blocks, and/or cable support, screw-cap receptacles, etc. Furnished with mounting bars or mounting clamps, if specified on order. Specifications Inside Dim. (Approx.) L 15, W 9, D 5 Capacity 30 Term. (3-Kulka No ) 36 Term. (Buchanan Type HD) **Max. Hub Tap Sides (R, L**) 1 Top & Bottom (T, B**) 2 Cond. Size *Order junction boxes by number, and specify hub tapping**, number & type of terminals, & with or without...cable support, insulating bushings, receptacles, mounting rails, etc. *Maximum hub taps indicated are for standard boxes. Larger hub size and taps available on special order. Method of Specifying Conduit Hub Taps conduit size symbols Conduit Size 1 /2 3 / /4 1 1 /2 2 Ordering Symbol Conduit Hub Tap Location Symbols XX TRBL X 00 XX (Type (Taps) (Cable (# of Term Box) Support Pos B block) optional) Example: Cat. No. JC Type Box to be topped 1 1 /4 top and bottom and 3 /4 left side only. Order As: Junction Box Cat. No JC5053C03B Toll Free 61

62 ACCESSORIES K-Z Series Beacon Flasher Conforms to FAA and FCC specification. Completely calibrated to applicable FAA/FCC specifications by factory technicians. No field adjustment ever necessary. Ultra reliable: surge and transient resistance components. High power: rating 2.0KW maximum continuous tungsten load at up to 131 F (+55 C) ambient air temperature 120 or 240 VAC option per circuit. Flash rate: 30 FPM; 2/3 on, 1/3 off duty cycle. Fail safe operation: normally closed solid state relay configuration assures lights on condition even if control circuitry fails. Visible operation indicator red LED (light emitting diode) provides instant visual verification of field operation. Modular construction: Easy field installation or retrofit for existing applications. Easy replacement if damaged. Specifications Input Voltage: 120 VAC 1 0 / 240 VAC 1 0 Power Rating: 2000 Watts maximum, continuous duty (zero voltage switching) Flash rate: 30 FPM; 2/3 on, 1/3 off duty cycle Peak Current Surge: 320 Amps 100 milliseconds, 650 amps, 1 60 Hz (non repetitive) Operating Temperature: -55 C to +55 C Transient Suppression: 2.5 KV@ 10 milliseconds components to case Reliability: MTBF over 500,000 hrs (SSR) per MIL-217C List of Standard Solid State Beacon Flashers Part Number Description KZ1L10R30A 1-Beacon 120V KZ2L10R30A 1-Beacon 240V KZ1L1RR30A 1-Beacon & Load Balance Resistor 120V KZ2L1RR30A 1-Beacon & Load Balance Resistor 240V KZ1L20E30A 2-Beacon Simultaneous 120V KZ2L20R30A 2-Beacon Simultaneous 240V KZ1L2PR30A 2-Beacon Alternate 120V KZ2L2PR30A 2-Beacon Alternate 240V KZ1L2SR30A 2-Beacon & 2 Load Balance Resistor Simultaneous 120V KZ2L2SR30A 2-Beacon & 2 Load Balance Resistor Simultaneous 240V KZ1L2QR30A 2-Beacon & 2 Load Balance Resistor Alternate 120V KZ2L2QR30A 2-Beacon & 2 Load Balance Resistor Alternate 240V KZ1S3T030BA 3-Beacon Simultaneous 120V KZ3S3T030B 3-Beacon Simultaneous 240V KZ1S3T030A 3-Beacon Sequential 120/208V KZ2L4N03BA 4-Beacon Simultaneous 240V KZ1L4NR30A 4-Beacon Apart 120V KZ1S4N030AA 4-Beacon Sequential 120/208V KZ1S5N030AA 5-Beacon Sequential 120/208V KZ1S5N030A 5-Beacon 4 Position 120/208V (2 Beacon Top) KZ1S6N030AAB 6-Beacon 4 Position 120/208 V (3 Beacon Top) KZ1S7Z030B 7-Beacon 120/208 V (Top & Bottom Flash Together) KZ1S7U030A 7-Beacon 5 Position 3 Beacon Top 120/208V 62 HUGHEYANDPHILLIPS.COM

63 lighting systems

64 LIGHTING SYSTEMS 64 HUGHEYANDPHILLIPS.COM

65 LIGHTING SYSTEMS Toll Free 65

66 LIGHTING SYSTEMS 66 HUGHEYANDPHILLIPS.COM

67 LIGHTING SYSTEMS Toll Free 67

68 LIGHTING SYSTEMS 68 HUGHEYANDPHILLIPS.COM

69 LIGHTING SYSTEMS r e pa i r s e r v i c e s a g lo b a l l e a d e r Hughey & Phillips is a global leader in the design and manufacturing of obstruction lighting technology. We engineer and design a complete line of low, medium and high intensity lighting technology solutions for radio, television, and communication towers; wind turbines; buildings; smokestacks; bridges; and other obstructions to aerial navigation. All products are Hughey & Phillips offers a vast selection repair services for tower lighting controllers, flashheads and beacons. Our repair service department offers customers a fast and economical method to overhaul their fielded equipment for years of operation. manufactured by Hughey & Phillips in the USA. With a full engineering staff providing complete support and design in optical, electrical and mechanical disciplines to customize any of our products to fit our customers unique needs. To learn more, visit Toll Free 69

70 LIGHTING SYSTEMS 70 HUGHEYANDPHILLIPS.COM

71 LIGHTING SYSTEMS Toll Free 71

72 LIGHTING SYSTEMS 72 HUGHEYANDPHILLIPS.COM

73 LIGHTING SYSTEMS Toll Free 73

74 LIGHTING SYSTEMS 74 HUGHEYANDPHILLIPS.COM

75 LIGHTING SYSTEMS Toll Free 75

76

77 faa standards

78 faa standards Red Obstruction Lighting Standards (FAA Style A) Day Protection = Aviation Orange / White Paint Night Protection = 2,000cd Red Beacon and sidelights = L-864 flashing beacon = L-810 obstruction light a-0 a-1 a-2 a-3 a-4 a-5 a-6 Notes: 1. The overall height of the structure including all appurtenances such as rods, antennas, obstruction lights, etc., determines the number of light levels. 2. The red obstruction lighting system is composed of flashing omnidirectional beacons (L-864) and/or steady burning (L-810) lights. When one or more levels is comprised of flashing beacon lighting, the lights should flash simultaneously. 3. The chart above illustrates the requirements for standard lighting of towers and supporting structures in accordance with FAA Advisory Circular 70/7460-1; Chapters 3, 4, 5, and HUGHEYANDPHILLIPS.COM

79 faa standards High Intensity Obstruction Lighting Standards (FAA Style B) Day Protection = 200,000cd White Strobe Twilight Protection = 20,000cd White Strobe Night Protection = 2,000cd White Strobe = L-856 high intensity strobe (3 flashheads required per level for 360 o coverage) B-2 B-3 B-4 B-5 B-6 Notes: 1. The height of the main structure excluding all appurtenances such as rods, antennas, obstruction lights, etc., determines the number of light levels. Note: Any appurtenances over 40 feet (12 meters) requires additional lighting, consisting of a Medium Intensity L-865 White Strobe, see FAA Style C. 2. When high intensity white lights are operated 24 hours a day, other methods of marking and lighting may be omitted. This system should not be recommended on structures 500 feet (153 meters) AGL or less unless an FAA aeronautical study shows otherwise. 3. The chart above illustrates the requirements for standard lighting of towers and supporting structures in accordance with FAA Advisory Circular 70/7460-1; Chapters 3, 4, 7, and Toll Free 79

80 faa standards High Intensity Obstruction Lighting Standards (FAA Style C) Day Protection = 200,000cd White Strobe Twilight Protection = 20,000cd White Strobe Night Protection = 2,000cd White Strobe = L-856 high intensity strobe (3 flashheads required per level for 360 o coverage) = L-865 medium intensity strobe required appurtenances of 40 feet or greater c-2 c-3 c-4 c-5 c-6 Notes: 1. The height of the main structure excluding all appurtenances such as rods, antennas, obstruction lights, etc., determines the number of light levels. Note: Any appurtenances over 40 feet (12 meters) requires additional lighting, consisting of a Medium Intensity L-865 White Strobe. 2. When high intensity white lights are operated 24 hours a day, other methods of marking and lighting may be omitted. This system should not be recommended on structures 500 feet (153 meters) AGL or less unless an FAA aeronautical study shows otherwise. 3. The chart above illustrates the requirements for standard lighting of towers and supporting structures in accordance with FAA Advisory Circular 70/7460-1; Chapters 3, 4, 7, and HUGHEYANDPHILLIPS.COM

81 faa standards Medium Intensity White Obstruction Lighting Standards (FAA Style D) Day/Twilight Protection = 20,000cd White Strobe Night Protection = 2,000cd White Strobe Painting of tower is typically not required = L-865 FLASHING WHITE STROBE 1/2 but not lower than 200 feet (61m) D-1 D-2 Notes: 1. The overall height of the structure including all appurtenances such as rods, antennas, obstruction lights, etc., determines the number of light levels. 2. The medium intensity flashing white light system is normally composed of flashing omnidirectional lights. This system is not normally recommended on structures less than 200 feet AGL. 3. The chart above illustrates the requirements for standard lighting of towers and supporting structures in accordance with FAA Advisory Circular 70/7460-1; Chapters 3, 4, 6, and Toll Free 81

82 faa standards Medium Intensity Dual Obstruction Lighting Standards (FAA Style E) Day/Twilight Protection = 20,000cd White Strobe Night Protection = 2,000cd Red Strobe and Sidelights Painting of tower is typically not required = L-864/L-865 flashing dual (white/red) strobe = L-810 obstruction light 1/2 but not lower than 200 feet (61m) e-1 e-2 Notes: 1. The overall height of the structure including all appurtenances such as rods, antennas, obstruction lights, etc., determines the number of light levels. 2. The dual lighting system includes red lights (L-864) for nighttime and medium intensity flashing white lights (L-865) for daytime and twilight use. This lighting system may be used in lieu of operating a medium intensity flashing white lighting system at night. Some populated areas where the use of white medium intensity at night may cause significant environmental concerns, the use of the dual lighting system should reduce/mitigate those concerns. 3. The chart above illustrates the requirements for standard lighting of towers and supporting structures in accordance with FAA Advisory Circular 70/7460-1; Chapters 3, 4, 8, and HUGHEYANDPHILLIPS.COM

83 faa standards Dual High Intensity Obstruction Lighting Standards (FAA Style F) Day Protection = 200,000cd White Strobe Twilight Protection = 20,000cd White Strobe Night Protection = 2,000cd Red Beacon and Sidelights = L-856 high intensity strobe (3 flashheads required per level for 360 o coverage) = L-864 flashing red beacon = L-810 red obstruction light f-2 F-3 f-4 F-5 F-6 Notes: 1. The height of the main structure excluding all appurtenances such as rods, antennas, obstruction lights, etc., determines the number of light levels. Note: Any appurtenances over 40 feet (12 meters) requires additional lighting, consisting of a Medium Intensity L-865 White Strobe and a L-864 Red Beacon. 2. This dual lighting system includes red light (L-864) for nighttime and high intensity flashing lights (L-856) for daytime and twilight use. This lighting system may be used in lieu of operating a high intensity flashing white lighting system at night. There may be some populated areas where the use of high intensity lighting may cause significant environmental concerns. The use of the dual lighting system should reduce/mitigate those concerns. 3. The chart above illustrates the requirements for standard lighting of towers and supporting structures in accordance with FAA Advisory Circular 70/7460-1; Chapters 3, 4, 9, and Toll Free 83

84 faa standards Bridge and Wind Turbine Lighting L-864 or L-865 or (L-864 / L-865) Front View side View 84 HUGHEYANDPHILLIPS.COM

85 notes Toll Free 85

86 notes 86 HUGHEYANDPHILLIPS.COM

87 notes Toll Free 87

88 Broadcast Telecommunications Wind Turbines Tall Structures Utilities ABOUT OUR COMPANY Hughey & Phillips is a leader in the design and manufacturing of obstruction lighting technology. We produce a complete line of lighting solutions that provide illumination for aerial navigation around the world. And we offer complete power and lighting systems designed and manufactured in the USA. Our cost-effective obstruction lighting technology provides highly efficient and reliable lighting solutions. By offering complete support and design in electrical, optical and mechanical disciplines, Hughey & Phillips can fully customize any product to fit the unique needs of any customer Toll Free Telephone FAX HUGHEYANDPHILLIPS.COM 240 W. Twain Ave Urbana, OH The Evolution of a BranD For more than 75 years Hughey & Phillips has earned a reputation for quality, dependability and innovation in obstruction lighting around the globe s 1970 s 1970 s Present