Priceguide August 2013

Transcription

1 Priceguide August 2013 RADIANT CONTROL LTD

2 Contents Water Temperature Controls Boiler Controls, Weather Compensators and Sensors...3 tn4 Building Management Controls and tn4 Room Controllers...4 tn4 Ancillaries...5 Mixing Valves and Actuators...6 Underfloor Heating Wiring Centres and Thermal Actuators / Adaptors...7 Air Temperature Controls 24v Thermostats v Thermostat Sensors v Dial Thermostats v Display and Programmable Thermostats and Sensors...11 Wireless Thermostat System...12 Wireless 2-Way System and Wireless Standalone...13 Time Switches & Zone Control Time Switches...14 Motorised Valves...14 Thermostatic Radiator Valves...14 Control Packs...15 Pump Injection Zone Pack...15 Switches & Switch Gear...15 Modvlvs Pipework Solutions 70Kw DN25 Zone Packs and Safety Group Set Kw DN25 Zone Packs - Overview Kw DN32 Zone Packs and Safety Group Set Kw DN32 Zone Packs - Overview...19 Flow Meters and Regulation...20 Ball Valves...21 Solar Thermal Controllers, Pump Stations and Ancillaries Solar Controllers...22 Solar Pump Stations and Accessories...23 Renewable Energy Buffer Tanks and Heat Interface Units...24 Modvlvs Headers & Plate Heat Exhanger Packs...25 Compact Constant Temperature Controllers...26 Anti Condensing Thermstatic Valves...26 Compact Anti Condense Pump Packs...26 Plate Heat Exchangers...26 Compact Energy Meters All prices included in this price list exclude VAT which is charged at the current rate. All products and services are sold in accordance with Radiant Control terms and conditions, a full copy of which is available on request. E and OE. 2 Full technical information can be found on our website :

3 Water Temperature Controls Boiler Controls Boiler Controller 260e The Single Boiler Controller 260e replaces existing wiring centres in twin zone and mid position plans to improve the operation of the system, gain efficiency and increase overall comfort. The 260e is easy to retrofit and boasts a number of energy saving features and benefits. Code : Price Each : Boiler Controller 264e The Controller 264e is a four Boiler sequence unit, with lead-lag rotation, weather compensator and Domestic Hot Water (DHW) control. Unit supplied complete with outdoor and boiler flow and return sensors. Code : Price Each : Weather Compensation Mixing Controllers Weather Compensation 355x Controller The 355x Controller is a weather compensation unit with a single variable temperature system, it is supplied complete with outdoor and mixed flow sensors. The mixing method utilises valves with either a floating action or 0-10 Vdc. Code : Price Each : Weather Compensation 360e Controller The 360e Controller is a Weather compensation unit with a single variable temperature system. It is supplied complete with outdoor, boiler flow and mixed flow sensors. The mixing method utilises valves with a floating action. Code : Price Each : Weather Compensation 374e Controller The 374e Controller is a Weather compensation unit for three variable water temperature applications and Domestic Hot Water (DHW) control. It is supplied complete with outdoor, boiler flow & mix flow sensors. Code : Price Each : Water Temperature Control Sensors 070e Outdoor Sensor Provides accurate measure of outdoor temperature and includes 10kΩ thermistor. The kanmor Outdoor Sensor 070e includes a 10 kω thermistor which provides an accurate measurement of the outdoor temperature. The 070e sensor is protected by a white U.V. resistant PVC plastic enclosure. Code : Price Each : e Universal Sensor Provides accurate measure of pipe work temperature and includes 10kΩ thermistor. The kanmor Universal Sensor 071e has a zinc sleeve for fast response and a wide operating range. This sensor can be used in a multitude of applications. The 071e is supplied with 12 (300 mm) of two conductor wire C 125 o C temperature range. Code : Price Each : e Indoor Sensor Provides accurate measure of room temperature and includes 10kΩ thermistor. Supplied with wall plate 008e Code : Price Each : e Slab Sensor Provides accurate measure of floor temperature and includes 10kΩ thermistor. The kanmor Slab Sensor 079e has a stainless steel sleeve which is designed for use in concrete or grout. The 079e is supplied with 3m of cable. Code : Price Each : Discreet Indoor Sensor 084e The tekmar Discreet Indoor Sensor 084e includes a 10k thermistor mounted on a white thermoplastic disk to provide an accurate measurement of the indoor temperature. The 084e mounts flush or nearly flush to the wall to give an unobtrusive look to the sensor. Code : Price Each : Full technical information can be found on our website : 3

4 tn4 Integrated Systems tn4 Controls Power Manager 345e The 345e provides power to the controller module and is supplied with an easy to wire enclosure. The Power Manager 345e has an internal transformer that powers a Weather Compensation Module 422e (single) or Weather compensation Module 423e (double). A single tn4 bus input is available to allow Wiring Centres and in some cases, Mixing Expansion Modules, to be connected. Code : Price Each : Weather Compensation Module 422e Single On/Off or modulating boiler control, weather compensator for two variable temperature systems and Domestic Hot Water control (DHW). The Weather Compensation Module 422e provides outdoor water temperature reset to a hydronic heating system based on the outside air temperature in order to maximise comfort and fuel efficiency. The 422e can operate a single on / off boiler or a single modulating boiler. Code : Price Each : Weather Compensation Module 423e Two On/Off or modulating boiler controls, weather compensator for four variable temperature systems and DHW control. The Weather Compensation Module 423e provides outdoor water temperature reset to a hydronic heating system based on the outside air temperature in order to maximise comfort and fuel efficiency. The 423e can operate two on / off boilers or two modulating boilers. Code : Price Each : x 10 Zone Wiring Centre Ten zone wiring centre complete with two volt free relays. Unit operates with 24Vac components in conjunction with an in built 50VA transformer. Power supply to wiring centre 230Vac. Code : Price Each : tn4 Room Controllers tn4 Room Controller 538e Single stage with four button control, with floor temperature sensing capability. Unit can follow one of two master schedules. The tekmarnet 4 Room Controller 538e operates a single stage of heating with an option for floor sensing. Code : Price Each : tn4 Room Controller 540e Single stage heat, single stage cool and fan, four button control. Unit can follow one of two master schedules. The tekmarnet 4 Room Controller 540e operates a single stage of heating, single stage cooling, and a single fan. Code : Price Each : tn4 Room Controller 542e Single stage with four button control, with remote temperature sensing capability. Unit has a fully programmable schedule. The tekmarnet 4 Room Controller 542e operates one stage of heating equipment. The 542e can operate as a standalone device, or communicate with a group of tekmarnet 4 room controllers. Code : Price Each : tn4 Room Controller 546e Two stage heat, two stage cool and two fan, four button control, with remote temperature sensing capability. Unit has a fully programmable schedule. The tekmarnet 4 room controller 546e operates two stages of heating equipment, two stages of cooling equipment, and two fans. The fan operation includes logic to operate ventilation. The 546e can operate as a standalone device, or communicate with a group of tekmarnet 4 room controllers. Code : Price Each : Full technical information can be found on our website :

5 tn4 Integrated Systems Ancillaries Mixing Expansion Module 441e Adds mixing capabilities to weather compensation module 423e. Compatible with 3 & 4 port mixing valves from 15mm 50mm and is supplied with a mix sensor. The Mixing Expansion Module 441e is designed to operate many common 3-way and 4-way brass mixing valves. The 441e provides 6 N m of torque over a 90 rotation. Code : Price Each : tn4 Setpoint Control 162e One stage heat/cool with program mable schedule. Second relay for hot tub, Domestic How Water (DHW) and pool applications. The Setpoint Control 162e is a single stage heat or cool setpoint control that can operate on an On / Off differential or can operate on Pulse Width Modulation. The control includes a second relay contact to operate a system pump. The control includes special modes for hot tub, indirect domestic hot water tank, radiant floor, and pool applications. Code : Price Each : tn4 User Switch 480e Switch has three inputs for ease of change between configurable scenes. The inputs can be used for scene signals from: remote telephone dial switches, building security systems and web controlled relays. The User Switch 480 has 3 programmable buttons that allow users to easily change the operating scene or allow users to enable / disable tn4 setpoint devices on a tn4 system. Code : Price Each : tn4 User Switch 481e Switch has three outputs for ease of change between configurable scenes. The outputs can be used for alarm signals enabling hot tubs and pools etc or sending scene signals to third party devices. The User Switch 481e has 3 programmable buttons that allow users to easily change the operating scene or allow users to enable / disable tn4 setpoint controls on a tn4 system. Code : Price Each : tn4 Timer 033e Unit can operate with up to 4 system schedules and provides daylight savings time. The tekmarnet 4 Timer 033e can be programmed to operate up to four events each day (Wake, Unoccupied, Occupied, and Sleep). When used in a tekmarnet 4 system it can operate up to four separate schedules for one system. It can also be used as a standalone Timer by utilising the relay contact (either normally closed or normally open). Code : Price Each : tn4 Crestron Internet Gateway 482e The tn4 Crestron Internet Gateway 482e allows the user to monitor and adjust tn4 systems using Crestron home automation software. The tn4 Internet gateway utilises Crestron software (available as a download from the Crestron website) enabling compatibility, viewing and system change of Kanmor components as appropriate. Code : Price Each : 1, tn4 Internet Gateway 483e The tn4 Internet Gateway 483e allows the user to monitor and adjust tn4 systems using any web browser. The tn4 Internet gateway also provides two alert outputs and a single demand input with notification on system status/alert. Unit also has data logging capability. Code : Price Each : 1, Full technical information can be found on our website : 5

6 Water Temperature Controls Mixing Valves and Actuators 3-Port Mixing Valve 4-Port Mixing Valve ESBE Rotary Valves ESBE valves are available as brass bodied units in either 3 or 4 port configuration. The units have a reputation for quality and with recent enhancements boast leakage rate as low as 0.05%. Units utilise adaptors enabling various actuators to be accepted including the associated ESBE actuator in both 230vac and 24vac. Description Capacity Code Price 320/R-4, 20mm 3-Port Mixing Valve (BSP) Capacity up to 12Kw /S-6, 20mm 3-Port Mixing Valve (BSP) Capacity up to 19Kw /S-10, 25mm 3-Port Mixing Valve (BSP) Capacity up to 34Kw /S-16, 32mm 3-Port Mixing Valve (BSP) Capacity up to 50Kw /S-25, 40mm 3-Port Mixing Valve (BSP) Capacity up to 80Kw /S-40, 50mm 3-Port Mixing Valve (BSP) Capacity up to 120Kw /S-2, 15mm 4-Port Mixing Valve (BSP) Capacity up to 8Kw /R-4, 20mm 4-Port Mixing Valve (BSP) Capacity up to 12Kw /S-6, 20mm 4-Port Mixing Valve (BSP) Capacity up to 19Kw /S-10, 25mm 4-Port Mixing Valve (BSP) Capacity up to 34Kw /S-16, 32mm 4-Port Mixing Valve (BSP) Capacity up to 50Kw /S-25, 40mm 4-Port Mixing Valve (BSP) Capacity up to 80Kw /S-40, 50mm 4-Port Mixing Valve (BSP) Capacity up to 120Kw Note: Valve capacities have been based upon a system F & R Δt of 10ºc ESBE Rotary & Linear Actuators The ESBE series ARA600 is a compact actuator designed for operating both 3 and 4 port rotary mixing valves from sizes, 15mm to 50mm. The actuators offer 3 point control in both 230vac and 24vac and operating speeds or 120 seconds. Units are supplied with end switch and easy setting. Rotary Actuators Description Code Price VA v Actuator Floating action to suit 3 & 4 port mixing valves VA230 - PM5 230v Actuator Floating 3 & 4 port mixing valves - no end switch VA230 - PM15 230v Actuator Floating 3 & 4 port mixing valves - no end switch VA24 24v Actuator Floating action to suit 3 & 4 port mixing valves VA24P 24v Actuator Modulating action, 0-10Vdc for 3 & 4 port valves Linear Actuator M0AA volt Thermal Actuator Modulating action, 0-10Vdc for use with MR03 3-port mixing valve. Adapter ring supplied VA IVAR Rotary Valves IVAR valves are available as brass bodied units in either 3 or 4 port configuration. The Units have a reputation for quality and are compact in design. Units utilise adaptors enabling various actuators to be accepted including the associated IVAR actuator in 230vac. 3-Port Mixing Valve 4-Port Mixing Valve MR03 Mixing Valve Description Capacity Code Price 120/R-4, 20mm 3-Port Mixing Valve (BSP) Capacity up to 12Kw /S-6, 20mm 3-Port Mixing Valve (BSP) Capacity up to 19Kw /R-8, 25mm 3-Port Mixing Valve (BSP) Capacity up to 25Kw /S-12, 25mm 3-Port Mixing Valve (BSP) Capacity up to 42Kw /S-18, 32mm 3-Port Mixing Valve (BSP) Capacity up to 63Kw /S-28, 40mm 3-Port Mixing Valve (BSP) Capacity up to 80Kw /S-44, 50mm 3-Port Mixing Valve (BSP) Capacity up to 150Kw /R-4, 20mm 4-Port Mixing Valve (BSP) Capacity up to 12Kw /S-6, 20mm 4-Port Mixing Valve (BSP) Capacity up to 19Kw /R-8, 25mm 4-Port Mixing Valve (BSP) Capacity up to 25Kw /S-12, 25mm 4-Port Mixing Valve (BSP) Capacity up to 42Kw /S-18, 32mm 4-Port Mixing Valve (BSP) Capacity up to 63Kw /S-28, 40mm 4-Port Mixing Valve (BSP) Capacity up to 80Kw /S-44, 50mm 4-Port Mixing Valve (BSP) Capacity up to 150Kw MR03 25mm 3-Port Mixing Valve (BSP) Capacity up to 7Kw Note: Valve capacities have been based upon a system F & R Δt of 10ºc IVAR Rotary Actuators The IVAR Rotary actuator is designed for operating both 3 and 4 port rotary mixing valves from sizes 15mm to 50mm. The actuators offer 3 point control in 230vac and an operating speed of 140 seconds VA230 - HT 230v Actuator Floating 3 & 4 port mixing valves - no end switch Full technical information can be found on our website :

7 Water Temperature Controls Thermal Actuators & Adaptors 24v Wiring Centres 230v Wiring Centres Thermal Actuators The MOAA range of thermal actuators is available in both 230VAC and 24 Vac on/off options, normally closed and powered open. Adaptors are available for a wide range of manifold connection (see below). Units supplied with position indicator for ease of identification with regard to actuator position. M0AA-2004 Thermal Actuator 230Vac. With position indicator M0AA-4004 Thermal Actuator 24Vac. With position indicator Adaptors Description Colour Code Price Each VA10 Adapter ring - M30 x 1.5 Manufacturers: Dumser, Cronatherm, Vescal, KaMo, Emmeti. light grey VA16 Adapter ring - M28 x 1.5 Manufacturers: Herz. red VA26 Adapter ring pushfit - M30 x 1.5 Manufacturers: Giacomini. dusty grey VA32 Adapter ring - M28 x 1.5 Manufacturers: Tour & Andersson. light green VA39 Adapter ring - M30 x 1.0 Manufacturers: Oventrop. pure white VA50 Adapter ring - M30 x 1.5 Manufacturers: Honeywell & Braukmann, Reich, MNG(before 98), Böhnisch(SBK)(H)(from 98), Cazzaniga. dark grey VA80 Adapter ring - M30 x 1.5 Manufacturers: Heimeier, MNG(new 98), Onda, Oventrop,M30x1,5(from 97), Schlösser(from 93), Comap(m30x1,5), TA from 99, Empur, Böhnisch(SBK)(H) (from 98), Thermotechnik TT-i, Landis&Gyr. white grey x 10 Zone Wiring Centre Ten zone wiring centre complete with two volt free relays. Unit operates with 24Vac components in conjunction with an in built 50VA transformer. Power supply to wiring centre 230Vac. Code : Price Each : Modular Four Zone Wiring Centres Four zone wiring centre master complete with two volt free relays. Unit operates with 24Vac components in conjunction with a remote 60VA transformer. Power supply to wiring centre 230Vac. RAD86-WC24 Master Module Code : Price Each : RAD88-WC24 Slave Module Code : Price Each : RAD80-230V/24V Transformer Module Code : Price Each : Microcentre Wiring Centres LED displays indicating Power On and Heat Demand. Unit includes Two volt free relays and connection for external timer for either on/off or night setback control. EZC Vac 8 Zone Wiring Centre Code : Price Each : EZC Vac 4 Zone Wiring Centre Code : Price Each : FH-WC 8 Zone Wiring Centre The FH-WC is an eight zone floor heating wiring centre for use in systems having hard wired room thermostats. Code : Price Each : Modular Four Zone Wiring Centres Four zone wiring centre master complete with two volt free relays. Unit operates with 230Vac components. RAD16-WC230 Master Module Code : Price Each : RAD27-WC230 Slave Module Code : Price Each : Full technical information can be found on our website : 7

8 Air Temperature Controls 24v Thermostats 506x Display Room Thermostat 24Vac electronic display thermostat. Auxiliary sensor input available for air or slab control. Features night setback when used with remote time switch. Code : Price Each : e Programmable Room Thermostat 24Vac electronic programmable thermostat. Two Auxiliary sensor inputs available for air and slab control. Features early start from night setback. Code : Price Each : e Programmable Room Thermostat 24Vac electronic 2 stage heating/cooling thermostat. Two Auxiliary sensor inputs available for air and slab control. Features early start from night setback. Code : Price Each : x Dial Thermostat 24Vac electronic dial thermostat, with lock and limiting facility. Features night set back when used with remote time switch. Setback 4 C fixed. Code : Price Each : RET24 NSB Dial Thermostat 24Vac electronic dial thermostat with LED indication. Unit offers night setback when activated by remote timeswitch. Night setback is fixed at 4 o C. Code : Price Each : Dial Thermostat Dial thermostat utilising a stainless steel sensitive element as the switching mechanism and offers locking and limiting temperature set point. Code : Price Each : RAD-69 Dial Thermostat 24Vac electronic dial thermostat with LED indication. Unit offers night setback when activated by remote timeswitch. Night setback is fixed at 4 o C. Unit will accept remote sensor type RAD-66. Code : Price Each : RAD-73 Tamperproof Room Thermostat 24Vac electronic thermostat. Auxiliary sensor input available for slab control. Features night setback when used with remote time switch. Code : Price Each : RAD-74 Tamperproof Room Thermostat 24Vac basic electronic thermostat without remote sensor capability and night setback Code : Price Each : Full technical information can be found on our website :

9 Air Temperature Controls 24v Thermostat Sensors 070e Outdoor Sensor Provides accurate measure of outdoor temperature and includes 10kΩ thermistor. Code : Price Each : e Universal Sensor Provides accurate measure of pipe work temperature and includes 10kΩ thermistor Code : Price Each : e Indoor Sensor Provides accurate measure of room temperature and includes 10kΩ thermistor. Supplied with wall plate 008e Code : Price Each : e Remote Air Sensor Plate Plate sensor available in a variety of finishes and 10kΩ thermistor. Unit is supplied with 600mm flying lead. Code : Price Each : f Remote Thimble Sensor - Brilliant White Thimble sensor with brilliant white ABS housing and 10kΩ thermistor. Unit supplied with 2m flying lead, screened as standard. Code : Price Each : g Remote Thimble Sensor - Brass Thimble sensor with brass housing and 10kΩ thermistor. Unit supplied with 2m flying lead, screened as standard. Code : Price Each : h Remote Thimble Sensor - Aluminium Thimble sensor with aluminium housing and 10kΩ thermistor. Unit supplied with 2m flying lead, screened as standard. Code : Price Each : e Slab Sensor Provides accurate measure of floor temperature and includes 10kΩ thermistor. Unit supplied with 3m flying lead as standard. Code : Price Each : RAD-66 Floor/Air Sensor Provides accurate measure of floor/air temperature and includes 10kΩ thermistor. Unit supplied with 3m flying lead as standard. Code : Price Each : Discreet Indoor Sensor 084e The tekmar Discreet Indoor Sensor 084 includes a 10kΩ thermistor mounted on a white thermoplastic disk to provide an accurate measurement of the indoor temperature. Code : Price Each : FH-WF Floor Sensor Code : Price Each : Full technical information can be found on our website : 9

10 Air Temperature Controls 230v Dial Thermostats Dial Thermostat Dial thermostat utilising a stainless steel sensitive element as the switching mechanism and offers locking and limiting temperature set point. Code : Price Each : RET 230P Dial Thermostat Dial thermostat with electronic operation offering tamperproof option when used in conjunction with specific tamperproof dial (available on request). Cable connection is three-wire, plus earth. Code : Price Each : RMT-230 Dial Thermostat Dial thermostat utilising a stainless steel sensitive element as the switching mechanism and offers locking and limiting temperature set point. Cable connection is two-wire, plus earth. Code : Price Each : RET-230L Dial Thermostat Dial thermostat with electronic operation, power and switching LED indication, and offering locking and limiting temperature set point. Cable connection is three-wire, plus earth. Code : Price Each : RET-230NSB Dial Thermostat Dial thermostat with electronic operation, power and switching LED indication, and offering locking and limiting temperature set point. 4 o C fixed night set-back facility, when used with an external timeswitch. Cable connection is three-wire, plus earth. Code : Price Each : RET230LSA Dial Thermostat + TS2 Dial thermostat with electronic operation, power and switching LED indication, and offering locking and limiting temperature set point. Unit offers remote sensing option for either floor or air temperature. Cable connection is three-wire, plus earth. Code : Price Each : MTU.1999R Dial Thermostat Dial thermostat with electronic operation and switching LED indication. 5 o C fixed night set-back facility, when used with an external timeswitch. Unit offers remote sensing option for either floor or air temperature. Cable connection is three-wire, plus earth. Code : Price Each : MTU.1999T Tamper Resistant Thermostat Tamper resistant thermostat with electronic operation, with 5 o C fixed night set-back facility, when used with an external timeswitch. Unit offers remote sensing option for either floor or air temperature. Code : Price Each : Tamperproof Room Thermostat Unit uses a bi-metallic sensitive element offering reliability and longevity. Unit is equipped with an accelerator and LED switching indication; unit offers locking and limiting temperature set point Code : Price Each : Full technical information can be found on our website :

11 Air Temperature Controls 230v Display and Programmable Thermostats 230v Thermostat Sensors Display Room Thermostat The digital room thermostat offers ease of installation, Simple 2 button operation with additional menu function button. Unit offers remote floor sensing option. Code : Price Each : Programmable Room Thermostat Semi flush mounted programmable room thermostat offering air or floor temperature control or air temperature control and floor limit control. Programme available for use are 5/2 day, 6/1 day, or 7 day facility. Code : Price Each : TP5000Si Programmable Room Thermostat The TP5000 Si range of programmable room thermostats offers ease of installation and uses 5/2 day facility offer different programmes for weekdays and weekends, with up to 6 time and temperature changes each day. Code : Price Each : Programmable Room Thermostats The OCC2/OCD2 range of programmable room thermostat offers ease of installation and uses 24h/7 day facility offer different programmes for each day if required, with up to 4 time and temperature changes each day. Description Code Price OCC programmable thermostat with integral air sensor OCC programmable thermostat with remote floor sensor OCD programmable thermostat with integral air and floor sensor ETF999 Remote Room Sensor Only suitable for MTU-1999R, MTU-1999T, OCC2-1999, OCC and OCD Code : Price Each : ETF199 Remote Floor Sensor Only suitable for MTU-1999R, MTU-1999T, OCC2-1999, OCC and OCD Code : Price Each : TS2 Remote Room Sensor Only suitable for RET230LSA thermostat and FH-WP thermostat. Code : Price Each : TS3 Remote Floor Sensor Only suitable for RET230LSA thermostat. Code : Price Each : Full technical information can be found on our website : 11

12 Air Temperature Controls Wireless 2-Way System CF-RS Room Thermostat Easy wireless installation, the unit is powered by 2 AA batteries, temperature override facility with a remote controller. Temperature range is 5 35 o C, controlled with a dial. Code : Price Each : CF-RP Public Room Thermostat Tamperproof thermostat with no direct access to settings. Easy wireless installation, the unit is powered by 2 AA batteries, temperature override facility with a remote controller. Temperature range is 5 35 o C, controlled with a dial. Code : Price Each : CF-RD Display Room Thermostat Displays either actual temperature or setting, Temperature, Clock symbol indicating setback/timer function. Electronic limitation of min./max. room temperature via menu on display. Unit incorporates Alarm icons and error codes in display. Temperature range is 5 35 o C, controlled with a dial. Code : Price Each : CF-RF Display Room Thermostat with IR Floor Sensor Unit as per CF-RD but in addition measures the floor surface temperature with an infra-red Floor sensor and regulates temperature according to maximum and minimum settings. Code : Price Each : Repeater Unit CF-RU The Repeater Unit CF-RU extends the transmis sion range between Master Controller, room Thermostats, and other connected components by 2-way wireless communication. The Repeater Unit is particularly useful where distance or physical objects may impede any wireless con nection. If the link test reveals a missing wireless connection to the Master Controller, simply install the Repeater Unit and reactivate the link test. Code : Price Each : Remote Controller CF-RC The optional wireless Remote Controller, CF-RC, offers a wide range of extended functionality and application features. This includes access to: individual settings for each Master Control ler output for floor heating or radiator heating, temperature setback program for zone control, period program for holiday temperature setback, lock and override of temperature settings on local Room Thermostats, system surveillance for error identification and alarm logging etc. Code : Price Each : Master Controller CF-MC The Master Controller features include 2-way wireless transmission, up to 10 short-circuit protected outputs for 24V NC or NO actuators, relays for both pump and boiler control, self diagnosing program, global standby, heating/cooling function, regulation by ON/OFF or pulse width modulation principles (PWM) 5-Way Code : Price Each : Way Code : Price Each : Full technical information can be found on our website :

13 Air Temperature Controls Wireless Thermostat System WLM2-1BA 8 Zone Wiring Centre 8 zone wiring centre. Provides connection point for thermostats and thermal actuators. Code : Price Each : WLM2-1AO 6 Zone Add on Module 6 add on module to be used in conjunction with WLM2-1BA zone wiring centre. Provides additional connection points for thermostats and thermal actuators. Code : Price Each : WLRC2-19 Wireless Receiver Wireless receiver unit to be used in conjunction with WLM2-1BA zone wiring centre. Code : Price Each : WLTP-29 Tamperproof Room Sensor Tamperproof room sensor to be used in conjunction with WLM2-1BA zone wiring centre. Code : Price Each : WLTA-29 Dial Room Sensor Dial room sensor to be used in conjunction with WLM2-1BA zone wiring centre. Code : Price Each : WLTM-29 Dial Room Sensor Dial room sensor with manual override facility (Auto/day/night/off) to be used in conjunction with WLM2-1BA zone wiring centre. Code : Price Each : WLTD-29 Dial Room Sensor Dial room sensor with manual override facility (Auto/day/night/off) to be used in conjunction with WLM2-1BA zone wiring centre. Includes remote floor sensing feature. Code : Price Each : WLCT2-29 Programmable Display Room Sensor Programmable display room sensor with 4 switching events per day. To be used in conjunction with WLM2-1BA zone wiring centre. Includes remote floor sensing feature. Code : Price Each : Wireless Standalone TP5000-RF Si Standard transmitting thermostat which can be used in conjunction with RX1, RX2 and RX3 receiver units. Wireless programmable room thermostat with service interval room function. Code : Price Each : RX1 Single Channel Receiver Single channel receiver for TP5000 Si-RF thermostat. RX2 2 Channel Receiver Two channel receiver for TP5000 Si-RF thermostat. RX3 3 Channel Receiver Three channel receiver for TP5000Si-RF thermostat. Code : Price Each : Code : Price Each : Code : Price Each : Full technical information can be found on our website : 13

14 Time Switches & Zone Control Time Switches H17XL Time Clock 7 Day Single channel (volt free changeover contacts). 6 switching periods per day. Code : Price Each : H27XL Time Clock 7 Day Two channels for Heating and Hot water (volt free changeover contacts). 6 switching periods per day. Code : Price Each : H37VXL Time Clock 7 Day Three channels for Heating and Hot water (volt free on/off contacts). 6 switching periods per day. Code : Price Each : Motorised Valves - 230V Motorised Valves - 24V Thermostatic Radiator Valves H47XL Time Clock 7 Day Four channels for Heating and Hot water (230 Vac on off contacts). 6 switching periods per day. Code : Price Each : mm 2 Port 2 port zone valves and actuators available 22 and 28mm, the spring return actuators have auxiliary switches and 1m of cable. A manual override lever is fitted for operation as required. 222XL 22mm Code : Price Each : XL 28mm Code : Price Each : mm 3 Port 3 port zone valves and actuators available 22 and 28mm, the spring return actuators have auxiliary switches and 1m of cable. A manual override lever is fitted for operation as required. 322XL 22mm Code : Price Each : XL 28mm Code : Price Each : mm 2 Port 2 port zone valves and actuators available 22 and 28mm, the spring return actuators have auxiliary switches and 1m of cable. A manual override lever is fitted for operation as required. HP22 22mm Code : Price Each : HP28 28mm Code : Price Each : ETRV Programmable Thermostatic ETRV Programmable Thermostatic Code : Price Each : Infra-Red Handheld Controller Code : Price Each : RTRV Thermostatic This pack comprises: both TRV valve body and head along with lockshield valves to match. Connections supplied offer 15mm flow and return or alternatively 10mm. This unit is both flexible in application and can be fitted on flow or return to suit. Code : Price Each : Full technical information can be found on our website :

15 Time Switches & Zone Control Control Packs - 230V Single Zone Control Pack Comprising 22mm two port motorised zone valve, 12 way wiring centre and programmable thermostat. Code : Price Each : DHW Zone Pack Comprising 22mm two port motorised zone valve and DHW cylinder thermostat. Code : Price Each : Pump Injection Zone Pack Control Packs Rad Pack1 22mm Radiator Zone Pack comprising two port motorised zone valve and programmable thermostat Code : Price Each : Rad Pack 2 22mm Towel Rail Pack comprising two port motorised zone valve and strap on pipe thermostat. Code : Price Each : Rad Pack 3 22mm High limit protection pack comprising two port motorised zone valve and strap on pipe thermostat. Code : Price Each : CTZ Zone Pack Comprises: injection and mixed pumps for connection between primary and secondary circuits. The pump block utilises Kanmor 361e controller to inject variable amounts of primary water into the secondary mixed circuit. Connections ¾ BSP, dimensions 350mm x 165mm x 170mm. Code : Price Each : Switches & Switch Gear PST Transformer 24Vac Unit is fused and supplied for DIN rail mounting. Capacity 12VA. Dimensions 86mm x 53mm x 58mm. Code : Price Each : ETNK-S Terminal Cover Wall mounting case for use with PST24 transformer. Dimensions 130mm x 85mm x 60mm Code : Price Each : Remote Home Control Telephone Switch Unit comprises three volt free switches for remote telephone activation. LED displays indicating Power On and channel status. Code : Price Each : Full technical information can be found on our website : 15

16 Modvlvs Pipework Solutions Modvlvs 70Kw DN25 Zone Packs The Modvlvs range of DN25 distribution units comprises unmixed constant temperature and mixed variable temperature zone packs. Utilising high quality brass components the distribution units provide a quick and easy installation in heating applications where different zone control requirements exist. CT Zone Pack (Constant Temperature) Comprises: high efficiency pump, isolation ball valves, temperature gauges and non-return valve. Available in 1 BSP connections. Supplied with insulation box cover as photograph above. 1 CT Zone pack with 6 mtr head circulating pump CT Zone pack with 8 mtr head circulating pump VT Zone Pack (Variable Temperature) Comprises: zone pump, isolation ball valves, temperature gauges, non-return valve and 3-port mixing valve (Kv4 or Kv6). Available in1 BSP connections. Supplied with insulation box cover as photograph above. 1 VT Zone pack with 6 mtr head circulating pump VT Zone pack with 8 mtr head circulating pump Hydraulic Header - 3m 3 /hr (70 Kw 20 o C D T ) The Hydraulic Header is connected before the Distribution Header and hydraulically isolates the primary and secondary circuits; this allows the primary flow to be maintained at boiler manufacturer s requirements, and greater volumetric flow in the Distribution Header to all circuits. 14 header suitable for flow up to 3m 3 /h DAOA100 Wall fixing set 100mm offset from wall Hydraulic Header Connections to Distributor Two 3-piece unions sets are required for connection from hydraulic header to distributor SET Hydraulic Switcher to Distributor Union Set (Two required per application) Distribution Header - 3m 3 /hr (70 Kw) The Distribution header is connected after the Hydraulic Header and is available with connections from two flow and return up to six individual flow and return. HV Distributor 70/125 range can be used for applications up to 3m 3 /h (70kW). HV 70/125-2 L: 508mm, 2 F & R conns HV 70/125-3 L: 758mm, 3 F & R conns HV 70/125-4 L: 1008mm, 4 F & R conns HV 70/125-5 L: 1258mm, 5 F & R conns HV 70/125-6 L: 1508mm, 6 F & R conns DAOA-HV Wall Fixing set for HV Distribution Header, providing mm offset from wall /M Isolating valve for Distribution Header Safety Group Set SG50 Safety Group Set Security unit with EPS insulation 20mm with 1 F connection Code: Price Each : The kit includes: Body made in hot forged brass Pressure gauge 63, 4 bar, a Automatic air vent valve, 6 bar, a Safety valve 3 bar, 1 /2 for power up to 50kW 16 Full technical information can be found on our website :

17 Modvlvs Pipework Solutions Modvlvs 70Kw DN25 Zone Packs - Overview 360e Weather Compensation VA230-PM5 Actuator Radiator Circuits UFH Circuits Cylinders A B A G Typical 70 Kw 20 o C D T H C D I E F From Boiler 264e Boiler Controller To Boiler (A) CT Zone Pack 6Mtr Pump Code: Mtr Pump Code: (B) VT Zone Pack 6Mtr Pump Code: Mtr Pump Code: (C) Manifold Distributor 2 F & R Distributor Code: F & R Distributor Code: F & R Distributor Code: F & R Distributor Code: F & R Distributor Code: (D) Distributor Wall Bracket Code: (E) Hydraulic Header Code: (F) Hydraulic Header Wall Bracket Code: (G) 50 Kw Safety Group Code: (H) 1 Isolating Valve Code: (I) Hydraulic Header/Distributor Connector Code: Full technical information can be found on our website : 17

18 Modvlvs Pipework Solutions Modvlvs 165Kw DN32 Zone Packs The Modvlvs range of DN32 distribution units comprises unmixed constant temperature and mixed variable temperature zone packs. Utilising high quality brass components the distribution units provide a quick and easy installation in heating applications where different zone control requirements exist. CT Zone Pack (Constant Temperature) Comprises: high efficiency pump, isolation ball valves, temperature gauges and non-return valve. Available in 14 BSP connections. Supplied with insulation box cover as photograph above. 14 CT Zone pack with 7 mtr head circulating pump CT Zone pack with 8 mtr head circulating pump VT Zone Pack (Variable Temperature) Comprises: zone pump, isolation ball valves, temperature gauges, non-return valve and 3-port mixing valve (Kv12). Available in 14 BSP connections. Supplied with insulation box cover as photograph above. 14 VT Zone pack with 7 mtr head circulating pump VT Zone pack with 8 mtr head circulating pump Hydraulic Header - 7m 3 /hr (165 Kw 20 o C D T ) The Hydraulic Header is connected before the Distribution Header and hydraulically isolates the primary and secondary circuits; this allows the primary flow to be maintained at boiler manufacturer s requirements, and greater volumetric flow in the Distribution Header to all circuits. 2 header suitable for flow up to 7m 3 /h DAOA-HW160 Wall fixing set 160mm offset from wall Hydraulic Header Connector Kit to Distributor One 4-piece union set and bend is required for connection from hydraulic header to distributor SETHW80 Hydraulic Switcher to Distributor Connector Kit Safety Group Set Distribution Header The Distribution header is connected after the Hydraulic Header and is available with connections from single flow and return up to six individual flow and return. HV Distributor 80/125 range can be used for applications up to 7m 3 /h (165kW). HV 80/125-2 L: 508mm, 2 F & R conns HV 80/125-3 L: 758mm, 3 F & R conns HV 80/125-4 L: 1008mm, 4 F & R conns HV 80/125-5 L: 1258mm, 5 F & R conns HV 80/125-6 L: 1508mm, 6 F & R conns DAOA-HV160 Wall Fixing set /AMMS Isolating valve for Distribution Header /AMMS nut and gasket Ref: AYHT07SET SG200 Safety Group Set Security unit with EPS insulation 20mm with 1 F connection Code: Price Each : The kit includes: Body made in hot forged brass Pressure gauge 63, 4 bar, 18 Automatic air vent valve, 6 bar, a Safety valve 3 bar, 1-14 for power up to 50kW 18 Full technical information can be found on our website :

19 Modvlvs Pipework Solutions Modvlvs 165Kw DN32 Zone Packs - Overview 360e Weather Compensation VA230-PM5 Actuator Radiator Circuits UFH Circuits Cylinders A B A Typical 165 Kw 20 o C D T I D G F C From Boiler H To Boiler 264e Boiler Controller E (A) CT Zone Pack 7Mtr Pump Code: Mtr Pump Code: (B) VT Zone Pack 7Mtr Pump Code: Mtr Pump Code: (C) Hydraulic Header Code: (D) 200 Kw Safety Group Code: (E) Hydraulic Header Wall Bracket Code: (F) Manifold Distributor 2 F & R Distributor Code: F & R Distributor Code: F & R Distributor Code: F & R Distributor Code: F & R Distributor Code: (G) Distributor Wall Bracket Code: (H) Hydraulic Header/Distributor Connector Code: (I) DN32-DN25 Distributor Connector Code: (J) Isolation Ball Valve and Nut/Gasket Ball Valve Code: Nut & Gasket Code: Full technical information can be found on our website : 19

20 Modvlvs Pipework Solutions Flow Meters & Regulators Flow Regulator Straight flow regulator and flowmeter, 22mm copper compression, Male Threaded and also male threaded on one end and with swivel nut on the other, from ¾ to 1 2, for solar, heating and hydronic applications. A careful sizing of the flow regulator provides very little headlosses. PN 10. Constant temperature 120 C (short time temperature 160 C for 20 sec). Available external connections: DN15: ¾ and 1 DN20: 14 and 1 1 /2 The available regulating/measuring ranges are the following: DN15: 1-6 l/min, 2-12 l/min, 8-28 l/min and 8-38 l/min DN20: 5-42 l/min and l/min The suffix xx shows the flow: 06 = 1-6 l/min 12 = 2-12 l/min 28 = 8-28 l/min 38 = 8-38 l/min 42 = 5-42 l/min 70 = l/min 22mm Compression - DN15 Bore - Straight Flow Meter & Regulator 22mm Type DN Range 1-6 l/min mm Type DN Range 2-12 l/min mm Type DN Range 8-28 l/min mm Type DN Range 8-38 l/min ¾ Male BSP - DN15 Bore - Straight Flow Meter & Regulator ¾ Type DN Range 1-6 l/min ¾ Type DN Range 2-12 l/min ¾ Type DN Range 8-28 l/min ¾ Type DN Range 8-38 l/min Capillary x BSP DN15 Bore Adaptor 15mm x ¾ Type 654 Adaptor for capillary solder connection to male thread connection mm x 1 Type 654 Adaptor for capillary solder connection to male thread connection Male BSP DN15 Bore - Straight Flow Meter & Regulator 1 Type DN Range 1-6 l/min Type DN Range 2-12 l/min Type DN Range 8-28 l/min Type DN Range 8-38 l/min Male BSP DN20 Bore - Straight Flow Meter & Regulator 1 Type DN Range 5-42 l/min Type DN Range l/min /4 Male BSP DN20 Bore - Straight Flow Meter & Regulator 14 Type DN Range 5-42 l/min Type DN Range l/min /2 Male BSP DN20 Bore - Straight Flow Meter & Regulator 1 1 /2 Type DN Range 5-42 l/min /2 Type DN Range l/min Full technical information can be found on our website :

21 Modvlvs Pipework Solutions Ball Valves Ball Valves With Thermometer The range of Ball Valves with Thermometers are available in sizes from ½ to 14 with thermometer colour coded red and blue to indicate flow and return application. ½ Type 520 Ball Valve & Thermometer - Red ½ Type 520 Ball Valve & Thermometer - Blue ¾ Type 520 Ball Valve & Thermometer - Red ¾ Type 520 Ball Valve & Thermometer - Blue Type 520 Ball Valve & Thermometer - Red Type 520 Ball Valve & Thermometer - Blue Type 520 Ball Valve & Thermometer - Red Type 520 Ball Valve & Thermometer - Blue Filter Ball Valves The range of Filter Ball Valves are available in sizes ½ and 14. Stainless steel filtering mesh 0.5mm. The filter ball facilitates easy access and cleaning of the filter mesh in all applications. ½ Type 514 Filter Ball Valve ¾ Type 514 Filter Ball Valve Type 514 Filter Ball Valve Type 514 Filter Ball Valve Solar Ball Valves The range of Solar Ball Valves are available in sizes ½ to 1 and are suitable for higher temperature solar applications. ½ Type 520 Solar Ball Valve ¾ Type 520 Solar Ball Valve Type 520 Solar Ball Valve A general range of ball valves are available from sizes from 4 up to 4 with various connection options, ie female BSP, male-female BSP and female BSP with coupling nuts. The Checkball series of ball valves are supplied with integrated non-return valves. Full technical information can be found on our website : 21

22 Solar Thermal Sorel Solar Controllers The new range of Sorel Solar Thermal Controllers provide a complete range of control for up to 48 standard applications. With a variety of input and output configurations this intuitive range of Controllers has everything required for simple use and management of the solar application. STDC STDC-1 Solar Thermal Controller with single Relay STDC-2 Solar Thermal Controller with single Relay STDC-3 Solar Thermal Controller with two Relays STDC-4 Solar Thermal Controller with two Relays MTDC MTDC-1 Solar Thermal Controller with two Relays MTDC-2 Solar Thermal Controller with two Relays MTDC-3 Solar Thermal Controller with three Relays MTDC-4 Solar Thermal Controller with three Relays LTDC LTDC-1 Solar Thermal Controller with four Relays LTDC-2 Solar Thermal Controller with four Relays LTDC-3 Solar Thermal Controller with five Relays LTDC-4 Solar Thermal Controller with five Relays XTDC XTDC-1 Solar Thermal Controller with nine Relays XTDC-2 Solar Thermal Controller with nine Relays PT1000 sensor Technical Specifications The controllers exist in different versions depending on the required relay and sensor configurations. Please visit for details on the available variants. MTDC LTDC XTDC SOREL Connect SOREL Connect Description STDC MTDC LTDC XTDC Temperature sensor inputs Relay outputs 230V of which for speed control of standard pumps Outputs 0..10V or PWM signal Number of applications LEDs red/green for display of operating status Simple heat metering Flow based heat metering (VFS sensor) Pressure monitoring (RPS sensor) 0-2 RTC battery-backed Real Time Clock Digital interface / CAN Bus system Data logging on SD-Memory Card (via data logger) Ethernet connection (via data logger) Full technical information can be found on our website :

23 Solar Thermal Solar Pump Stations and Accessories Solar Pump Station The range of solar pump stations comprise single and twin line units, with air separator and vents, flow-meter, fill and drain points, isolation ball valves, temperature gauges and safety valve. Unit stocked in 22mm, other sizes available on request. Solar S1 Single Line Solar Station Comprises: solar pump, air separator and vent, flow meter, fill and drain points, isolation ball valves, temperature gauges and safety valve. Available in connection sizes 22mm and 1 BSP male. Supplied with insulation box cover as photograph above. 22mm Solar Station with 6 mtr head circulating pump litres/min mm Solar Station with 8 mtr head circulating pump litres/min Solar S2 Twin Line Solar Station Comprises: solar pump, air separator and vent, flow meter, fill and drain points, isolation ball valves, temperature gauges and safety valve. Available in connection sizes 22mm and 1 BSP male. Supplied with insulation box cover as photograph above. 22mm Solar Station with 6 mtr head circulating pump liters/min mm Solar Station with 6 mtr head circulating pump litres/min mm Solar Station with 8 mtr head circulating pump liters/min mm Solar Station with 8 mtr head circulating pump litres/min Solar SC Twin Line Solar Station with MTDC Sorel Controller Comprises: solar pump, air separator and vent, flow meter, fill and drain points, isolation ball valves, temperature gauges and safety valve. Available in connection sizes 22mm (other sizes available on request). Supplied with insulation box cover as photograph adjacent. 22mm Solar Station with 6 mtr head circulating pump mm Solar Station with 8 mtr head circulating pump Solar-Plus pressure vessel with fixing bracket and ancillaries Pressure expansion vessel suitable for solar systems according to DIN4757. Inside the vessel there is a special solar membrane that separates the air from the solar liquid. Max. working pressure 10 bars, 2.5 bar precharged Working temperature: from -10 o C to 110 o C. Maximum constant temperature for the membrane: 100 o C The kit includes: Solar Plus Expansion vessel - capacity 8L, 18L or 25L L bracket to fix the expansion vessel to the wall. w M x w F connector provided with a double check valve made of brass to replace the expansion vessel without draining the installation. Wall plugs and packing 8L Capacity L Capacity L Capacity Stainless steel Flexible hoses 500mm x w mm x w Expansion Vessel Bracket and Connector Expansion vessel bracket and connector Full technical information can be found on our website : 23

24 Renewable Energy Buffer Tanks Buffer Tanks Without Coil with 100mm Polyurethane Insulation 800 litre PF00800 Buffer Tank no coil litre PF01000 Buffer Tank no coil , litre PF01250 Buffer Tank no coil , litre PF01500 Buffer Tank no coil , litre PF02000 Buffer Tank no coil , litre PF02500 Buffer Tank no coil , litre PF03000 Buffer Tank no coil , litre PF04000 Buffer Tank no coil , litre PF05000 Buffer Tank no coil , Buffer Tanks Single Coil with 100mm Polyurethane Insulation 800 litre PFS00800 Buffer Tank single coil , litre PFS01000 Buffer Tank single coil , litre PFS01250 Buffer Tank single coil , litre PFS01500 Buffer Tank single coil , litre PFS02000 Buffer Tank single coil , litre PFS02500 Buffer Tank single coil , litre PFS03000 Buffer Tank single coil , litre PFS04000 Buffer Tank single coil , litre PFS05000 Buffer Tank single coil , Buffer Tanks Dual Coil with 100mm Polyurethane Insulation 800 litre PFD00800 Buffer Tank dual coil , litre PFD01000 Buffer Tank dual coil , litre PFD01250 Buffer Tank dual coil , litre PFD01500 Buffer Tank dual coil , litre PFD02000 Buffer Tank dual coil , litre PFD02500 Buffer Tank dual coil , litre PFD03000 Buffer Tank dual coil , litre PFD04000 Buffer Tank dual coil , litre PFD05000 Buffer Tank dual coil , Please note: Carriages will be applicable on all deliveries. This will depend on tank size and configuration and is available on request. Heat Interface Unit X Block The Ultimate Interface for Controlling Heated Spaces when delivering heat from a Central Source for all District Heating applications up to15 kw. The patent pending X-Pump Block combines a variable speed Controller (Setpoint or Weather Compensation), Primary circulating Pump, Secondary circulating Pump, and Heat Exchanger into a single unit. An automatic variable speed Pump on the Primary Side ensures that the correct amount of heated water reaches the Heat Exchanger. A fixed speed Pump on the Secondary Side ensures that the correct flow-rate is maintained throughout the heating system. Sensors, (supplied with the units), can be mounted on the Primary Flow and the Secondary Flow with the option of Weather Compensation and use of an Outdoor Sensor to monitor the external ambient temperature. X Block interface unit and controller X Block power module Full technical information can be found on our website :

25 Renewable Energy Modvlvs Headers M2 Energy-Two Way Mixed and Unmixed Zone Pack The zone packs Modvlvs Energy are utilised to meter energy in centralised heating and cooling installations. M2 Energy - W6-25 pump * M2 Energy - RSG * M2 Energy MIX3 - W * M2 Energy MIX3 - RSG * *please note G21 energy meter is an additional cost, found below. G21 Energy Meter suitable for heating and cooling Compact energy meter, with storage of 18 monthly remote values, and storage of a years data (starting from the reference day). Digital interface for programming and/or reading and connection of an external communication module. MID approved. w x 110mm x 130mm Modvfresh Pump Pack to deliver instantaneous domestic hot water (DHW) Application: on thermal stores or similar, connected to solar thermal installations, wood pellet, biomass boilers etc. It provides instantaneous domestic hot water, avoiding bacterial pollution, such as the legionnaire s disease etc., caused by the stagnation of the hot water. This unit utilises a special electronic controller modulating the speed of the primary circulating pump, from a minimum speed of 12% up to the maximum selected speed, in order to provide a precise temperature of domestic hot water (typically 45 C). The variation of the secondary flow is measured by a sensor that gives the inputs of the flow and the temperature to the electronic controller, modulating the speed of the circulating pump accordingly. Two models with flow capacities of 1 to 20 l/min and 2 to 40 l/min. can be used for domestic and light commercial applications. With the below mentioned features: Delivered water temperature 45 C with a cold water supply temperature of 10 C: consequently the power is about 50Kw on the smaller duty at the maximum flow of 20 l/min and 98 Kw on the larger duty at the maximum flow of 40 l/min. The temperature of the DHW is adjustable up to 55 C The minimum required water inlet temperature to the heat exchanger is 60 C in order to guarantee the specified the maximum flow (with 35 C thermal Δt) Modufresh Unit 1 to 20 l/min , Modufresh Unit 2 to 40 l/min , Modvlvs Plate Heat Exchanger Packs M2 Exchange Heat exchange pump unit for hydraulic installations with insulation box, made of hot forged brass. By the means of this heat exchanger it is possible to separate hydraulically the primary circuit fed by wood pellet boiler etc. from the secondary circuit (for example underfloor heating systems) in installations where it is not advisable to utilise the same fluid in both primary and secondary circuits. Plate heat exchanger made of stainless steel AISI 316. Prepared for the direct connection to the anti-condensing pump unit of the primary circuit and to the mixed pump unit of the secondary circuit by means of the 1 male connections. It is also possible to connect several fittings to the T connectors. A 3 bar security unit with the pressure gauge 63mm (0-4 bar) and a draining valve are already provided in the heating circuit (secondary). EPP insulation box measurements : 250 x 143 x 218mm PN 10. constant temperature 120 o C Centre distance: 125mm External connections: 1 male. 16 plates plates plates Full technical information can be found on our website : 25

26 Renewable Energy Compact Constant Temperature Controllers Compact Constant Temperature Controllers The compact range of Constant Temperature Controllers provide an ideal solution to Setpoint Control applications with PID logic. The Controller is built into the housing of an Actuator and is then mounted directly on to the Mixing/Diverting Valve Body. A Pipe Sensor is supplied with the Controller. Typical applications would include return water temperature protection of Solid Fuel Boilers, Heat Exchanger temperature control, Swimming Pool and many other applications. The Controllers are simple to install and use with settings made by inbuilt keypad resistant to mechanical impact, moisture and dust. ACC10 Constant Temperature Controller ACC20 Constant Temperature Controller With Pump Control Anti Condensing Thermostatic Valves Anti Condensing Thermostatic Valves The Anti Condensing Thermostatic Valve optimises the connection of the Solid Fuel Heat Source to the Heating System or Buffer Tank by automatically adjusting the return water temperature to the Heat Source at the Thermostatic setting value. 1 Type 749 Thermostatic Mixing Valve - Set at 45 o C Type 749 Thermostatic Mixing Valve - Set at 55 o C Type 749 Thermostatic Mixing Valve - Set at 60 o C Type 746 Thermostatic Mixing Valve - Set at 45 o C Type 746 Thermostatic Mixing Valve - Set at 55 o C Type 746 Thermostatic Mixing Valve - Set at 60 o C Compact Anti Condense Pump Packs Compact MCCS Anti Condense Pump Packs The compact Modvlvs MCCS Pump Unit is available for all Biomass Heat Source applications up to 100Kw. The unit is designed to enable the installation to reach the optimal operating temperature whilst maintaining the design return water temperature. The unit is available with standard three speed or high efficiency circulating Pumps and includes a Thermostatic Cartridge, Clapet Valve for natural circulation, Isolating Ball Valves, Thermometers and Insulation Box. All units available with temperature ranges: 45 o C, 55 o C, 60 o C, and 72 o C. 28mm, complete with 3-speed pump - 100kW Max mm, complete with 3-speed pump - 100kW Max , complete with 3-speed pump - 100kW Max mm, complete with high efficiency pump - 80kW Max mm, complete with high efficiency pump - 80kW Max , complete with high efficiency pump - 80kW Max Plate Heat Exchangers Gasketed and Brazed Plate Heat Exchangers A wide range of gasketed plate exchangers are available on request for a variety of applications including, water to water, and steam to water applications. For smaller applications typically solar and similar the more compact brazed heat exchanger solution is available. Example of brazed plate heat exchanger - water to water 30kW capacity primary water 80 o C, secndary water 75 o C kW capacity primary water 80 o C, secndary water 75 o C kW capacity primary water 80 o C, secndary water 75 o C Full technical information can be found on our website :

27 Renewable Energy Mechanical Compact Energy Meter Class 2 ELF Electronic Heat Meter ELF is a fully electronic compact heat meter, with impeller scanning for recording energy and volume data. ELF is equipped with two temperature sensors and features lithium battery.. Options available are pulsed outputs (energy/volume), M-Bus and wireless. 2 heat meter complete with sensors - no output w heat meter complete with sensors - no output heat meter complete with sensors - pulse output w heat meter complete with sensors - pulse output Accessories Brass Bush Brass Tee with isolation valve M-Bus interface card Wireless interface card Ultrasonic Compact Energy Meter Class 2 Ultrasonic Heat Meter Ultrasonic compact energy meter can be used for measuring the energy consumption in heating applications for billing purposes. The measurement principle is static and based on the measurement of the transit time. Ultrasonic technology offers many benefits; no moving parts (avoids wear and tear of the metering components), low pressure loss, large metering dynamics and low start flow rate. A complete range is available from 15mm (1.5 m3/h) to 100mm (60m3/h). Extremely low power consumption feature enabling a long battery lifetime (16 years in standard use), radio options are integrated with M-Bus, Pulse, RS232 as output options. 2 heat meter complete with sensors, inc radio (screwed) w heat meter complete with sensors, inc radio (screwed) heat meter complete with sensors, inc radio (screwed) , heat meter complete with sensors, inc radio (screwed) , heat meter complete with sensors, inc radio (flgd PN25) , heat meter complete with sensors, inc radio (flgd PN25) , heat meter complete with sensors, inc radio (flgd PN25) , heat meter complete with sensors, inc radio (flgd PN25) , heat meter complete with sensors, inc radio (flgd PN25) , Accessories 35mm brass pockets (pair) mm brass pockets (pair) /24v power supply m sensor cable PT m sensor cable PT m sensor cable PT m sensor cable PT Pulse Input Card Pulse output card M-Bus output card RS232 output Full technical information can be found on our website : 27

28 Radiant Control Ltd Unit 6, Cartwright Court, Cartwright Way, Bardon Hill Coalville, Leicestershire, LE67 1UE Tel: Fax: Web: