July 2014 VRF Multi-split Air Conditioning System SET-FREE FSXN K

Transcription

1 This is an e-waste product and should not be mixed with general household waste at the end of its life. For more details kindly visit our website or contact Hitachi Dial-a-Care. Hitachi Home & Life Solutions (India) Limited. Head Office: Hitachi Complex, Karan Nagar, Kadi, Distt. Mehsana , Gujarat, India. Tel: (027) sales@hitachi-hli.com; Website: July 204 VF Multi-split Air Conditioning System SET-FEE FSXN K

2 Introducing a new addition to Hitachi s SET-FEE range of VF air conditioning units - enhancing efficiency and user experience Hitachi air conditioning successfully meets installer and customer demands - offering greater functionality, control and cost savings Hitachi has over 25 years of experience on VF system There is increasing demand for a holistic approach to air conditioning in modern offices - units that are capable of cooling and heating, adapting to the different seasons and various temperature requirements of rooms. Customers also want to save time, money and space with their air conditioning and have the flexibility to extend or modify their air conditioning set-up to suit changing needs. And of course there is a growing demand for air conditioning to be as environmentally friendly as possible - enabled through an air-conditioning management system that makes it easier for users to have simple, effective control of their air conditioning units to avoid unnecessary energy wastage, including overheating, overcooling and unattended operation. To meet and exceed these important requirements, Hitachi has developed the SET-FEE FSXNK air conditioning system. Needs of End Users Energy efficient Greater user control Flexibility to extend system Needs of Consultants Time saving with equipment layout design Flexible, modular system designs Intelligent controls Fresh air inspired by fresh technology Focus on health, improve interior air quality Needs of Contractor and installer Modular and lightweight for quicker (or phased) installations Increased piping lengths for flexibility SET-FEE FSXN K Compatible with Hitachi s system free indoor units Wide product range -FSXNK 8 to 54HP Energy saving -DC Inverter Driven Flexibility of Installation -Compact and light design and flexible refrigerant piping Comfort and eliability -Capable of impressively low noise levels with noise reduction preference mode (option) Control by Network System Off coil temperature control Sophisticated Antibacterial Technology () Hitachi high performance antibacterial filter adopts double layer antibacterial structure (long acting antibacterial filter and high performance antibacterial filter), adds active enzymes with a strong bactericidal function, which can restrain and kill bacteria and mould attached to the filter surface, as well as inhibit the reproduction of bacteria and mould on the high performance filter material and maintain fresh air in the room. Fresh Air Introduction Hitachi FSXNK series introduces outdoor fresh air into indoor space via the all-fresh air indoor units connected, improves the indoor oxygen content, constantly remains the interior fresh degree and create a healthy environment for people s lives. Optional features with select.

3 Energy Efficient System Configuration Hitachi Advanced Technologies Outdoor Unit Module type (external connection) 2-pipe heat pump operations unit efrigerant Piping Max. length: 65m Total length:,000m Transmission Corresponding to II Max. refrigerant groups Max. 60 indoor units Connectable Indoor Unit New Type DC Inverter Scroll Valve Open Discharge Pressure Space Hole for elease Valve Pressure Control Valve (elease Valve) Optimization scroll spec. Performance optimization by simulator Max. units Capacity range: 50-30% Compression Space Fixed Scroll Optimum oil supply Mini. tradeoff, leak heat-loss Pressure at Compression Space Discharge Pressure More coiled DC brushless motor High flux neodymium magnet Improved Intermediate Pressure Performance The intermediate pressure performance is drastically improved by using a release valve and optimizing orbiting scroll lifting force in the improved new compression mechanism. Therefore, intermediate pressure performance is largely improved for energy-saving. elease valve adoption prevents over compression. Orbiting scroll lifting force optimization has achieved leakage loss reduction. Exclusive Asyetric Scroll Technology The Asyetric scroll structure of Hitachi compressor effectively helps reduce the refrigerant gas leakage loss in the process of suction and compression, enhances operating efficiency and reliability. Asyetric scroll: the time difference between the suction of outside chamber and inside chamber is 800. The pressure of outside chamber and inside chamber are different. The pressure distribution in compressing chambers are asyetric. Syetric scroll: the outside chamber and inside chamber end gas suction at the same time, the pressures of outside chamber and inside chamber are equal. The pressure distribution in compressing chambers are syetric. Inside chamber Pi=Ps achieve suction BMS NETWOK SYSTEM Central Station DX Central Station Centralized ON/OFF Controller 7 Day Timer emote Controller Central Station EZ educe suction loss and leakage loss High efficiency New Type DC Motor Motor Efficiency at Low otation is Improved New type DC motor is increased the number of turns in a Outside chamber Po>Pi during compression Coil Motor Efficiency (%) 95 DC Motor Inside chamber Pi=Ps Outside chamber Po=Ps Achieve suction coil. This achieves to set inductive voltage high and down the current at low rotation. otor Stator 0 PM 4 5

4 The Originated 2-Stage Oil Separating Technique Improves eliability of System The originated 2-stage oil separating technique adopts Hitachi propriety compressor which has high efficient function on oil separating to conduct the final stage of oil separation. There is only a small proportion of refrigeration oil which is circulated together with refrigerant gas to oil separator and then separated as the second stage oil separating. Therefore, much less oil enters refrigerating circulation, accordingly enough oil can be guaranteed for lubricating compressor. The system can operate safely and reliably. Gas Suction Gas Discharge Accumulator Oil Seperator Second Stage Oil Separating efrigerant Gas with a Little Oil efrigerant Gas with Minimum Oil First Stage Oil Separating Optimization of Heat Exchanger Newly designed heat exchanger is increased its layers for sustainable high ambient temperature. Heat exchanger has been optimised by increasing heat transfer area. Increased Heat transfer area is achieved by increasing no. of row of heat exchanger. This has improved the performance of the unit at high ambient temperature. High HXE performance Sufficient heat exchange performance in 48 C can be obtained New Necessary Performance for 48 C efrigerant Gas with Minimum Oil Optimized Inverter Control Achieve the balance between intermediate performance and rated performance, optimize the inverter control for high rotation required area. If set inductive voltage high, result in restriction of rotation frequency at high area. However, this optimized inverter control ensure the operating area by trapezoid the voltage. Applied voltage Low area Max sine wave rise High area trapezoid Lesser voltage shortage Trapezoid-shape voltage by rotation control Artificially applied voltage up Efficiency (index) Current 00 7% up New 07.0 Intermediate performance ratio Low Fin Specification Improvement HP Fin Specification Improvement: Highly effficient super slit aluminium fin design has been opted for improving heat transfer efficiency. Capacity Control by Hz Performance is greatly improved by the high efficiency DC inverter compressor and 00% load compressor, and loss-less energy saving operation is achieved (depending on the building). DIP-IPM Inverter 5~00Hz Hitachi Precise Inverter-driven Figure of Fin Surface Heat-transfer Coefficient (Index) Current % up New Step Fan Speed Control The DC variable-speed motor is adapted in outdoor unit, which Adoption of Super Slit Fins atio of Fin specifications results in efficiency promotion and power input reduction. The outdoor fan speed can be adjusted by 27 steps. Air Streamline Grill Fan otating Speed High Oil eturn Optimization Hitachi SETFEE outdoor unit is modular type and connected to one Oil return circuit Solenoid valve refrigerant cycle. The oil should allocate back from refrigerant cycle to outdoor unit equally therefore each outdoor unit has oil equalizing Oil separator system. The oil equalizing system consist of oil separator, The stability of discharge pressure and suction pressure of compressor is assured. The stability of dynamic flow (capacity) allocation of indoor unit is assured. Low Efficient Axial Fan accumulator and oil return circuit. Hitachi unique technology of accumulator suction the oil by the gas pressure difference and it is able to adjust the oil feeding level depends on refrigerant circulating volume. This is the reason to satisfy both of intermediate Accumulator Quick response of control system is improved, accordingly the system stability, durability and reliability are assured. performance and rated performance. EE & COP Improved by 3.4% 6 7

5 Duy Copy Energy Efficiency atio (EE) is the most Important tool for checking performance of any Air-conditioning system at Given parameters. In absence of widely suitable and acceptable energy efficiency ratios and geographically changing ambient conditions. Significance of EE is more predominant in India then any other ratios. Hitachi offers some of the best EE values for its VF systems. These performances are the resultants of Hitachi s innovative technologies i.e. High efficiency Inverter fitted with brushless DC motor, Innovative High performance Heat exchangers using Super slit fin design and Invocative Oil Optimization technology Up by 20% 4.04 Up by 8% HP COP Cooling Old FSXN New FSXNK 2HP Product Line-up Choose the best suited model from a selection of each base unit used individually or in combinations. All integrating heat pump operation suits the customer requirements. Outdoor Unit Base Unit (6 models) Wide Working ange SET-FEE FSXNK can handle a wide range of outside air conditions, thus extending the flexibility of installation space and climatic environment. This unit is designed for cooling operation under high ambient temperature upto 48 C. -20 C Heating -5 C 5 C Cooling 48 C HP 0HP 2HP 4HP 6HP 8 HP 20HP 22HP 26HP 28HP 24HP 30HP Self-Demand Control A newly developed self-demand function has largely improved energy-saving effects. Since the current is self-detected and demand control is performed automatically, no signal wiring work is required. Conventional demand control using demand signals is also available, and you can select various operations as required. Power Setting Selectable from 00%, 80%, 70% and 40% of the rated power consumption for cooling operation. Power Consumption Morning Excessive power supply consumption exceeding the power setting range is restricted. Maximum efficiency is secured within the power setting range. NEW Daytime Night Operation Hours 32HP <Setting example: Schedule Setting for Each Group by Central Station DX> Group A Group B 34HP 36HP 38HP 40HP 42HP Power Setting Group A Power Setting: 80% Group B Power Setting: 60% 8A.M. 2 P.M. 3 P.M. 6 P.M. Time Various operating methods are available depending on purpose and needs. Central Station DX (PSC-A28WX, PSC-AS2048WXB) The specific outdoor unit and the period of time can be set from Central Station DX. NOTES. The demand current control (%) is indicated by approximate values. The values in this control which is calculated by the current is different precision from the value in the wattmeter. If it is required that the maximum power consumption is managed precisely, a field-supplied demand controller should be used. 2. The range may temporarily be higher than the power setting range (%) depending on the operating control condition such as protection control. 3. When the above self-demand control is set, the performance is restricted because the rotation frequency of compressor is forcibly decreased. 44HP 46HP 48HP 50HP 52HP 54HP 8 9

6 Indoor Unit Flexibility of Installation (HP) Compact and Light Design Transportation and Handling using Elevator The elevator can be used to transport the base unit separately. Premium 4-Way Cassette 4-Way Cassette AS-8 to 0FSXNK AS-2-8FSXNK Compact Cassette 2-Way Cassette,720,720 Even the Largest Basic Unit (8HP Model) Can Be Carried in an Elevator Elevator Door Opening: 800 Depth: 350 In-the-Ceiling (Low-Height) , In-the-Ceiling Type (Low Static Pressure) In-the-Ceiling Type (High Air Quantity) Improvement of Workability The piping connection work is newly available from the refrigerant piping outlet (right bottom side of the front cover) in addition to three directions (front, rear or bottom) from the bottom base. Ceiling Type Newly Added Wall Type 2 Control Cable Outlets Power Source Cable Outlet Wall Type No trap is required. Floor Type Floor Concealed Type Front Cover efrigerant Piping Outlet A new piping outlet is provided on the lower right side of the front cover and so the piping connection kit can be installed at the lower position. This makes an easy and clear installation of the piping from multiple outdoor units possible. 0

7 More Flexible efrigerant Piping Work Improved flexibility of design by increasing the total pipe length to,000 m max Max. piping length Between first branch and indoor unit Height difference between highest and lowest indoor units Height difference between outdoor and indoor units Sales on order Max. length between branch from indoor units Heat Pump System 65 m 90m or less 30m or less 50m 90m or less 40m Flexibility of Facility Design 4 3 Improvement of Piping Installation Height difference between the outdoor units and indoor units and height difference between the indoor units have been changed as shown below. ITEM HEAT PUMP SYSTEM Current Model New Model (FSXN) (FSXNK) Height Difference Outdoor Unit 50m 50m Between Outdoor Units is Heigher & Sales on 70m 90m Orders (2) Height Diffenece between indoor units 5m 30m 5 2 Other Advanced Technologies otational Operation to Distribute Load of Outdoor Units egulating the operation time of each outdoor unit leads to load reduction on compressors. 2 During multiple unit operation, the same rotation frequency of inverter compressor results in an equivalent load on each compressor. Therefore, outdoor unit endurance is improved. Inverter otation Frequency Control (Example) evolution of Inverter One Unit Operation Low Two Units Operation evolution of Operating Load Three Units Operation NOTES : At least 2 outdoor units are required for this function. 2: Comparison between rotation operation function and non-rotation operation function based on the same system. 3 Hi compressor and 2 may evolution of At the time of compressor start-up, or when 2 hours has passed from start of operation. It is operated so that the revolution of the inverter become the same. Backup Operation Function for Emergency The Backup Operation Function prevents the system from coming to a complete stop when outdoor unit failure occurs. Emergency operation starts with the remote control switch after an alarm. 3 Last Time Activation Order This Time Activation Order Next Time Activation Order Connectable to Max. The number of connectable indoor units has been increased to maximum. Thus, the system can be used in buildings where there are many indoor units to be connected. Even if one unit fails, the other can be operated continuously. 2 Press " TEMP. " simultaneously for 3 seconds. Emergency Operation Indication Outdoor units Capacity (HP) Max. Number of Connectable FSXNK Series Connection Capacity: 50 to 30% Failed Outdoor Unit x [EMG] is displayed on the LCD of the remote control switch, and emergency operation starts. Outdoor units Capacity (HP) Max. Number of Connectable FSXNK Series NOTES : At least 2 outdoor units are required for this function. 2: Emergency operation can be performed within 8 hours after unit stoppage. After 8 hours pass from unit stoppage, emergency operation can not be performed. 3: Emergency operation can be performed when the specified alarm code occurs. efer to Alarm Code for Emergency Operation. 2 3

8 Noise eduction Preference Mode (Optional Function) With the new Noise eduction Preference Mode, the sound pressure level for a particular time zone can be set based upon the usage environment. Therefore, the operation/management of air conditioners is facilitated in areas where the noise level at night time is restricted by laws and regulations. You can select from 3 sound pressure levels Optional Noise eduction Function Setting from Outdoor Unit Input and Output Function Sound Pressure Level (db) (Approx. Value) Setting 55 2 Setting Setting 3 45 NOTES : The range of performance and operation is restricted, because the rotation frequency of the compressor and outdoor fan is forcibly decreased. 2 Setting Example Low-Sound Operation during Night Time only by Using Timer Capacity (atio) 00% 60% Sound Pressure Level Daytime Daytime Input Signal Night time Night time 50dB Daytime Daytime Time : Perform the electrical wiring work on site when setting input signal. General Data Combination of Base Unit Power Supply Model AS8FSXNK AS0FSXNK AS2FSXNK AS4FSXNK AS6FSXNK AS8FSXNK AC 3Ph, 400 Nominal Cooling Capacity Nominal Heating Capacity Cabinet Color (Munsell Code) Natural Gray (.0Y 8.5/0.5) Maximum [Overall A Scale] (Night-Shift) db 58 (53) 58 (53) 6 (56) 62 (57) (57) (57) Outer Dimensions Height x Width x Depth,720 x 950 x 765,720 x 950 x 765,720 x,20 x 765,720 x,20 x 765,720 x,20 x 765,720 x,20 x 765 Net Weight kg Gross Weight kg efrigerant (Flow Control) (Scroll) Condenser Fan (Propeller Fan) Main efrigerant Piping Heat Pump System (2 Pipes) efrigerant Charge (before Shipment) 40A(Micro Computer Control Expansion Valve) QTY Motor Output ( Pole ) KW 4.8 (6) 6.0 (6) 7.2 (6) 4.8 (6) (2) 6.0 (6) (2) 6.0 (6) (2) Quantity Air Flow ate m3/min Motor Output (Pole) 0.33 (8) 0.44 (8) 0.66 (8) 0.66 (8) 0.9 (8) 0.9 (8) Liquid Line (in.) φ9.52 (3/8) φ9.52 (3/8) φ2.7 (/2) φ2.7 (/2) φ2.7 (/2) φ5.88 (5/8) Gas Line high / low (in.) φ9.05 (3/4) φ22.2 (7/8) φ25.4 () φ25.4 () φ28.58 (-/8) φ28.58 (-/8) pressure kg Packing Dimensions H X W X D,895 x 990 x 80,895 x 990 x 80,895 x,250 x 80,895 x,250 x 80,895 x,250 x 80,895 x,250 x 80 Approx. Packing Measurement Automatic Simple Judgement System for efrigerant Amount Use this automatic judgement function to check whether or not the refrigerant amount is sufficient in one refrigerant cycle. Factor for Judgement The appropriate refrigerant amount is calculated based upon the following data. NOTES : efrigerant over-charging is not detected. Over-charging can be detected by gradually adding refrigerant from the under-charged state at test run or when refrigerant leakage occurs. : This function does not provide automatic refrigerant charging. : The adjustment (estimate) is changed according to the operation condition (the number of operating units and temperature) efrigerant Cycle Temperature efrigerant Saturation Temperature Outdoor Unit Expansion Valve Data Indoor Unit Data efrigerant Cycle Configuration [Schematic diagram] efrigerant leakage occurs Thermistor Measure Adequate efrigerant Quantity Work Quantity Improvement Overcooler P Pressure Sensor Accumulator Outdoor Heat Exchanger Adjustment Correct Incorrect Model AS20FSXNK AS22FSXNK AS24FSXNK AS26FSXNK AS28FSXNK AS30FSXNK Combination of Base Unit AS8FSXNK AS8FSXNK AS0FSXNK AS2FSXNK AS4FSXNK AS4FSXNK AS2FSXNK AS4FSXNK AS4FSXNK AS4FSXNK AS4FSXNK AS6FSXNK Power Supply AC 3Ph, 400 Nominal Cooling Capacity Nominal Heating Capacity Cabinet Color (Munsell Code) Natural Gray (.0Y 8.5/0.5) Maximum [Overall A Scale] (Night-Shift) db 63 (58) (59) (59) (59) 65 (60) 66 (6) Outer Dimensions Height x Width x Depth,720 x 2,80 x 765,720 x 2,80 x 765,720 x 2,80 x 765,720 x 2,440 x 765,720 x 2,440 x 765,720 x 2,440 x 765 Net Weight kg Gross Weight kg efrigerant (Flow Control) 40A(Micro Computer Control Expansion Valve) QTY (Scroll) Motor Output ( Pole ) KW 4.8 (6) (6) 4.8 (6) (6) (2) 6.0 (6) (6) (2) 7.2 (6) (6) (2) 4.8 (6) (2) (6) (2) 4.8 (6) (2) (6) (2) Quantity Condenser Fan (Propeller Fan) Air Flow ate m3/min Motor Output (Pole) 0.33 (8) (8) 0.33 (8) (8) 0.44 (8) (8) 0.66 (8) (8) 0.66 (8) (8) 0.66 (8) (8) Main efrigerant Piping Heat Pump System (2 Pipes) efrigerant Charge (before Shipment) Liquid Line (in.) φ5.88 (5/8) φ5.88 (5/8) φ5.88 (5/8) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) Gas Line high / low pressure (in.) φ28.58 (-/8) φ28.58 (-/8) φ28.58 (-/8) φ3.75 (-/4) φ3.75 (-/4) φ3.75 (-/4) kg The cooling and heating performances are the values when combined with our specified indoor units Indoor Air Inlet Temperature: 27.0oC DB (80.0oF DB) Indoor Air Inlet Temperature: 20.0oC DB (68.0oF DB) 9.0oC WB (66.2oF WB) Outdoor Air Inlet Temperature: 7.0oC DB (45.0oF DB) Outdoor Air Inlet Temperature: 35.0oC DB (95.0oF DB) 6.0oC WB (43.0oF WB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2 The sound pressure is based on the following conditions. Meter from the unit service cover surface, and.5 Meters from floor level The above data is based on the cooling mode. In case of heating mode, the sound pressure level increases by approximately ~2 db. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. 3 If the specified main refrigerant piping on the table is not available on site, follow the allowable piping size in parentheses. When using the main refrigerant piping indicated in parentheses, prepare an appropriate reducer on site. 4 Except for the specified combination in the table (20~54HP), there is no other combination of the base unit 5 The width of outer dimension, it is the value when each distance between the base outdoor units is specified to

9 General Data Model AS32FSXNK AS34FSXNK AS36FSXNK AS38FSXNK AS40FSXNK AS42FSXNK AS6FSXNK AS0FSXNK AS2FSXNK AS2FSXNK AS2FSXNK AS2FSXNK Combination of Base Unit AS6FSXNK AS2FSXNK AS2FSXNK AS2FSXNK AS2FSXNK AS4FSXNK - AS2FSXNK AS2FSXNK AS4FSXNK AS6FSXNK AS6FSXNK Power Supply AC 3Ph, 400 Nominal Cooling Capacity Nominal Heating Capacity Cabinet Color (Munsell Code) Natural Gray (.0Y 8.5/0.5) Maximum [Overall A Scale] (Night-Shift) db 66 (6) 65 (60) 66 (6) 66 (6) 67 (6) 67 (6) Outer Dimensions Height x Width x Depth,720 x 2,440 x 765,720 x 3,40 x 765,720 x 3,670 x 765,720 x 3,670 x 765,720 x 3,670 x 765,720 x 3,670 x 765 Net Weight kg Gross Weight kg efrigerant (Flow Control) 40A(Micro Computer Control Expansion Valve) QTY (Scroll) Condenser Fan (Propeller Fan) Main efrigerant Piping Heat Pump System (2 Pipes) efrigerant Charge (before Shipment) Motor Output (Pole) KW 6.0 (6) (2) (6) (2) 6.0 (6) (6) (6) 7.2 (6) (6) (6) The cooling and heating performances are the values when combined with our specified indoor units Indoor Air Inlet Temperature: 27.0oC DB (80.0oF DB) Indoor Air Inlet Temperature: 20.0oC DB (68.0oF DB) 9.0oC WB (66.2oF WB) Outdoor Air Inlet Temperature: 7.0oC DB (45.0oF DB) Outdoor Air Inlet Temperature: 35.0oC DB (95.0oF DB) 6.0oC WB (43.0oF WB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2 The sound pressure is based on the following conditions. Meter from the unit service cover surface, and.5 Meters from floor level The above data is based on the cooling mode. In case of heating mode, the sound pressure level increases by approximately ~2 db. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. 3 If the specified main refrigerant piping on the table is not available on site, follow the allowable piping size in parentheses. When using the main refrigerant piping indicated in parentheses, prepare an appropriate reducer on site. 4 Except for the specified combination in the table (20~54HP), there is no other combination of the base unit 5 The width of outer dimension, it is the value when each distance between the base outdoor units is specified to (6) (6) (6) (2) 7.2 (6) (6) (6) (2) 7.2 (6) (6) (2) (6) (2) Quantity Air Flow ate m3/min Motor Output (Pole) 0.9 (8) (8) 0.44 (8) (8) (8) 0.66 (8) (8) (8) 0.66 (8) (8) (8) 0.66 (8) (8) (8) 0.66 (8) (8) (8) Liquid Line (in.) φ9.05 (3/4) φ 9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) Gas Line high / low pressure (in.) φ3.75 (-/4) φ3.75 (-/4) φ38. (-/2) φ38. (-/2) φ38. (-/2) φ38. (-/2) kg Model AS44FSXNK AS46FSXNK AS48FSXNK AS50FSXNK AS52FSXNK AS54FSXNK AS2FSXNK AS4FSXNK AS6FSXNK AS4FSXNK AS6FSXNK AS8FSXNK Combination of Base Unit AS6FSXNK AS6FSXNK AS6FSXNK AS8FSXNK AS8FSXNK AS8FSXNK AS6FSXNK AS6FSXNK AS6FSXNK AS8FSXNK AS8FSXNK AS8FSXNK Power Supply AC 3φ, 400 Nominal Cooling Capacity Nominal Heating Capacity Cabinet Color (Munsell Code) Natural Gray (.0Y 8.5/0.5) Maximum [Overall A Scale] (Night-Shift) db 68 (62) 68 (63) 69 (63) 68 (62) 69 (62) 69 (62) Outer Dimensions Height x Width x Depth,720 x 3,670 x 765,720 x 3,670 x 765,720 x 3,670 x 765,720 x 3,670 x 765,720 x 3,670 x 765,720 x 3,670 x 765 Net Weight kg Gross Weight kg efrigerant (Flow Control) 40A(Micro Computer Control Expansion Valve) QTY (Scroll) Condenser Fan (Propeller Fan) Main efrigerant Piping Heat Pump System (2 Pipes) efrigerant Charge (before Shipment) Motor Output ( Pole ) KW 7.2 (6) (6) (2) (6) (2) 4.8 (6) (2) (6) (2) (6) (2) 6.0 (6) (2) (6) (2) (6) (2) 4.8 (6) (2) (6) (2) (6) (2) 6.0 (6) (2) (6) (2) (6) (2) 6.0 (6) (2) (6) (2) (6) (2) Quantity Air Flow ate m3/min Motor Output (Pole) 0.66 (8) (8) (8) Liquid Line (in.) Gas Line high / low pressure 0.66 (8) (8) (8) 0.9 (8) (8) (8) 0.66 (8) (8) (8) 0.9 (8) (8) (8) 0.9 (8) (8) (8) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) φ9.05 (3/4) φ38. (-/2) φ38. (-/2) φ38. (-/2) φ38. (-/2) φ38. (-/2) φ38. (-/2) (in.) kg Way Cassette Type (Premium) Adopting New Structured Silky Flow Louver The newly-structured silky flow louver is adopted to soften the discomfort by the temperature irregularity and the cold draft. The individual control setting for each louver is available. Specifications Detecting Area Angle Approx. 23 Model Indoor Unit Power Supply Nominal Cooling Capacity ) Nominal Cooling Capacity 2) Nominal Heating Capacity db (Overall A Scale) Hi2/Hi/Me/Lo Dimensions H x W x D Net Weight kg efrigerant Air Flow ate m 3 /min. Hi2/Hi/Me/Lo (cfm) Motor W Connections Liquid / Gas Condensate Drain Approximate Packing Measurement m 3 Adaptable Panel Model Color Dimensions H x W x D Net Weight kg Approximate Packing Measurement Dia. Approx. 7m (.0~3.0FSN3) Dia. Approx. 8.8m (4.0~6.0FSN3) m 3 Example of 4.0HP and 6.0HP 0.8m (From Floor Surface) In the case of the ceiling height is 3.2m. Ceiling Height 3.2m. The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. 3. To be launched soon. 75 New Silky Flow Louver CI-.0FSN3 CI-.5FSN3 CI-2.0FSN3 CI-2.5FSN3 CI-3.0FSN3 AC, V / 50Hz, 220V / 60Hz ,500 3,550 5,000 6,300 7,00 9,900 4,00 9,800 25,000 28, ,400 3,400 4,800 6,00 6,900 9,600 3,600 9,00 24,200 27, ,800 4,00 5,400 7,300 7,700 0,900 6,400 2,500 29,000 30,700 33/30/28/27 Motion Sensor Control (Option) The air conditioning capacity is saved automatically depending on a situation and detecting amount of human activity by adopting the motion sensor on the corner of the air panel. The energy saving can be improved more with the individual operating function. In addition, the operation can be stopped automatically if the absent situation continues for more than 30 minutes. The motion sensor can maintain the comfortable indoor environment and eliminating the unnecessary operation 2. ): The default setting is 30 minutes. However, the setting is changeable. 2): The default setting is unning Operation. However, Automatic Stop can be selected by setting 3): The detecting area becomes smaller if the people stay motion less is few such as stretching on a chair, etc. CI-4.0FSN3 248 x 840 x x 840 x A 5/3//9 (530/459/388/38) 2/7/4/ (74/600/494/388) 2/7/4/ (777/600/494/388) 27/23/8/4 (953/82/635/494) 27/23/8/4 (953/82/635/494) 37/3/24/20 (,306/,094/847/706) P-AP60NA (without Motion Sensor) P-AP60NAE (with Motion Sensor) Natural White 37 x 950 x CI-5.0FSN3 37/33/26/2 (,306/,65/98/74) 27 CI-6.0FSN3 35/3/30/27 37/32/30/27 42/36/32/28 42/36/32/28 48/43/39/33 48/45/40/35 48/46/4/37 57 Flare-Nut Connection (With Flare Nuts) 6.35 / / / 5.88 VP ,000 39, ,600 38, ,700 42, ,500 49, ,000 47, ,800 54, ,200 56, ,800 54, ,500 6,400 37/35/28/22 (,306/,236/988/777) 6 7

10 4-Way Cassette Type SET FEE-CI Technique Features Extremely quite operation By employing a super-high-stream turbo fan (three-dimensional twisted wing large bore and high efficiency), the wind flow of efficiency has been improved with the under damping slit mounted near the center of the revolving shaft, the abnormal noise which is unique to DC motors caused by the number of magnetic poles and revolution speed of the motor, is reduced. With broad range of air supply, is suitable to be used in high ceiling and great space Unified panel sizes Panel size are unified to a 950 square, neat and elegance, and well harmonized with decoration. Compact and thin The height of the unit is just 248(less than 2.5HP), so it can be installed in a small space inside a ceiling. Model CI-.0 FSNQ CI-.5 FSNQ CI-2.0 FSNQ CI-2.5 FSNQ CI-3.0 FSNQ CI-4.0 FSNQ CI-5.0 FSNQ CI-6.0 FSNQ Indoor Unit Power Supply AC Ph, 220~240, 220V/60Hz KW Normal Cooling Capacity KW Normal Cooling Capacity KW Normal Heating Capacity db (Overall A Scale) Hi/ Me /Lo Dimension H X W X D 248 X 840 X X 840 X X 840 X X 840 X X 840 X X 840 X X 840 X X 840 X 840 Net Weight Kg efrigerant 40A Air Flow ate Hi/ Me/ Lo m3/min 3/2/ 5/3.5/2 6/4/2 20/7/5 26/23/20 32/28/24 34/29/25 37/32/27 (cfm) Motor W Connection Liquid φ 6.35 φ 6.35 φ 6.35 φ 9.53 φ 9.53 φ 9.53 φ 9.53 φ 9.53 Gas φ 2.7 φ 2.7 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 5.88 Condensate Drain VP 25 (Outer Diameter) O 32 Approximate Packing Measurement m Adaptable Panel Model P-N23NAQ Color NEUTAL WHITE Dimension H x W x D 37 X 950 X X 950 X X 950 X X 950 X X 950 X X 950 X X 950 X X 950 X 950 Net Weight Kg Approximate Packing Measurement m Way Cassette Compact Type Highly Compact Size Compared with the standard 4-Way Cassette Type indoor unit, the size of the air panel for this product has been reduced by 250 (from 950 to 700) The dashed line shows the size of the standard 4-way cassette type. Easy Installation Easier Height Adjustment The unit height can be adjusted from 4 corner pockets, with the air panel attached to the unit. Height adjustment from the corner pockets is suitable for fine adjustment. To keep the unit level, avoid significant height adjustment. Otherwise, it might cause water leakage from the drain pan. General Specifications Indoor Unit Type Model Indoor Unit Power Supply Nominal Cooling Capacity ) Nominal Cooling Capacity 2) Nominal Heating Capacity [Overall A Scale] Hi/Me/Lo Height Width Outer Dimensions Depth Net Weight efrigerant Indoor Fan Air Flow ate Hi/Me/Lo Motor Connections Liquid Line efrigerant Gas Line Piping Condensate Drain Approximate Packing Measurement db kg m3/min. W m3 700 CIM-.0FSN ,500 9, ,400 9, ,800 0,900 36/34/ /2/ VP Body Air Panel Corner Pocket Installation to Grid Ceiling This product can be installed to a grid ceiling with a 600 x 600 opening without cutting the grid. 4-Way Cassette (Compact) Type CIM-.5FSN3 CIM-2.0FSN3 AC, V / 50Hz, 230 / 50Hz, 220V / 60Hz ,550 5,000 4,00 9, ,400 4,800 3,600 9, ,00 5,400 6,400 2,500 38/35/33 42/39/ A 5/3.5/2 52 Flare-Nut Connection (With Flare Nuts) VP /4/ VP The indoor unit height from the false ceiling surface can be adjusted from the corner pocket with a wrench Grid Ceiling () 8. The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field.. The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. Voltage of the power source for the indoor fan motor is 220V. In case of the power source of 240V, the sound pressure level increases by about db.the above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. 9

11 20 2-Way Cassette Type Downsizing and weight reduction simplify handling for easier renewal The length of the 3.0HP type is shortened from,320 to 860, the height is also shortened, and the volume is reduced by about 50%.The reduced weight of 30 kg also makes handling much easier. Top-class noise control thanks to compact turbo fan The three-dimensional twisted wings of the compact turbo fan greatly reduce noise, and electromagnetic disturbance is minimized by PWM (Pulse Width Modulation) control. Speed-up tap ensures comfortable air conditioning even when installed in the high ceiling Even rooms with a high ceiling can be comfortably air-conditioned by setting the speed-up tap with the remote controll switch. Specifications Model Indoor Unit Power Supply Nominal Cooling Capacity ) Nominal Cooling Capacity 2) Nominal Heating Capacity (Overall A Scale) Hi/Me/Lo Dimensions H x W x D Net Weight efrigerant Air Flow ate Hi/Me/Lo Motor Connections Liquid / Gas Condensate Drain Approximate Packing Measurement Adaptable Panel Model Color Dimensions H x W x D Net Weight Approximate Packing Measurement db kg m 3 /min. (cfm) W m 3 kg m 3 35/32/30 Low-profile design allows installation in a small space inside ceiling A compact turbo fan simplifies the structure and reduces the height to 298, for easy installation.. The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. Voltage of the power source for the indoor fan motor is 220V. In case of the power source of 240V, the sound pressure level increases by about db.the above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. Ceiling 38/34/3 40/36/33 Compact Turbo Fan 298 CD-.0FSN2 CD-.5FSN2 CD-2.0FSN2 CD-2.5FSN2 CD-3.0FSN2 CD-4.0FSN2 CD-5.0FSN2 AC φ, V / 50Hz, 220V / 60Hz ,500 3,550 5,000 6,300 7,00 0,000 2,500 9,900 4,00 9,800 25,000 28,200 39,700 49, ,400 3,400 4,800 6,00 6,900 9,600 2,000 9,600 3,600 9,00 24,200 27,300 38,200 47, ,800 4,00 5,400 7,300 7,700 0,700 3,800 0,900 6,400 2,500 29,000 30,700 42,600 54,600 34/32/30 0/9/8 (353/38/282) 43/40/ x 860 x x,420 x A / 407C / 22 (Nitrogen-Charged for Corrosion-esistance) 3//9 5/3/ 9/6/4 29/24/2 34/29/25 (459/388/38) (530/459/388) (67/565/494) (,024/847/742) (,20/,024/883) x 2 55 x 2 Flare-Nut Connection (With Flare Nuts) φ6.35 /φ2.7 φ6.35 /φ5.88 φ9.52 /φ5.88 φ9.52 /φ5.883) VP P-N23DNA Neutral White P-N46DNA 30 x,00 x x,660 x In-the-ceiling Type (Low-height) SET FEE PIZ Technology Feature Installation Space Saving With a height of 92 may be easily installed inside the low height residential ceiling. Broad ange Of External Static Pressure 0Pa (or 30Pa), flexibility supports a wide range of installation conditions at site e.g. longer ducts and shorter ducts supplied. Satisfies Varied equests On Installation Available air inlet as rear or bottom entry, consumers can choose relevant air inlet mode according to the practical installation space. Normal Cooling Capacity Normal Cooling Capacity 2 Normal Heating Capacity Quite Operation Air flow rate can be adjusted by 3 grades, lower noise in lower grade. Model High Sound Low Sound Pressure (db) Pressure (db) PIZ-.0FSNQ 27 2 PIZ-.5FSNQ 3 26 PIZ-2.0FSNQ PIZ-2.5FSNQ Drain-up Mechanism as Standard Part Drain-up length achieves 900 which enables convenient drain piping and enlarges the flexibility of installation. Model PIZ-.0FSNQ PIZ-.5FSNQ PIZ-2.0FSNQ PIZ-2.5FSNQ Indoor Unit Power Supply (Overall A Scale) Hi/ Me/ Lo AC Ph, 220~240, 220V/60Hz KW KW KW db [ ] [ ] [ ] [ ] Dimension H X W X D 92 X 900 X X 900 X X 70 X X 70 X 447 Net Weight Kg efrigerant 40A Air Flow ate Hi/ Me/ Lo m3/min (cfm) 8/7/6 [7.5/6.5/5.5] 0/8/7 [9.8/8.5/7.5] 4.5/2.5/0.5 [3.5/.9/9.5] 6/4/2 [4.8/3.0/.5] External Pressure Pa 0(30) [20(50)] 0(30) [20(50)] 0(30) [20(50)] 0(30) [20(50)] Motor W Connection Flare-Nut Connection (with Flare Nuts) Liquid φ 6.35 φ 6.35 φ 6.35 φ 9.53 Gas φ 2.7 φ 2.7 φ 5.88 φ 5.88 Condensate Drain VP 25 (outer Diameter O 32 Approximate Packing Measurement m

12 In-the-ceiling Type (Low Static Pressure) SET FEE-PI Technique Features Installation Space Saving Less than 270 in height can be easily fit into the limited space in the false ceiling (0.8HP to 2.5HP) Flexibilty supports a wide range of installation conditions at site In-the-ceiling Type (High Air Quantity) Broader range of external static pressure and higher air volume. Flexibly supports a wide range of installation conditions on site, e.g. longer ducts. Space Saving Design With a height of only 280 (2.0HP to 3.0HP), 385 (4.0HP to 5.0HP) or 440 (8HP and 0HP), this unit can be installed at false ceiling spaces in almost any building. 285 Minimum 5 False Ceiling Adjustable Fan Speed The indoor fan motor has three speeds that can be adjusted to allow for pressure loss in the duct, thus providing a more efficient air flow. Quiet Operation The well balanced centrifugal fan helps in a quiet and efficient operation. Model Indoor Unit Power Supply Normal Cooling Capacity Normal Cooling Capacity 2 Normal Heating Capacity (Overall A Scale) Hi/ Me/ Lo Dimension H X W X D 270 X X 720 NOTE: When bottom air inlet is adopted, sound pressure will increase according to factors such as the installation mode and the room structure. PI-.0FSNQL PI-.5FSNQL PI-2.0FSNQL PI-2.5FSNQL PI-3.0FSNQL PI-4.0FSNQL PI-5.0FSNQL PI-6.0FSNQL PI-8.0FSNQL PI- 0.0FSNQL AC Ph, 220~240V/ 50Hz, 220V/60Hz AC f, 220 AC 3f, 380V~45 KW KW KW db X X X X X X x x x x x x x x x 060 x 20 Net Weight Kg efrigerant 40A Air Flow ate Hi/ Me/ Lo m3/min 8/7/6 3//9 5/3/ 6/4/2 25/2/7 27/23/9 37/3/25 38/35/ (cfm) External Pressure Pa Motor W Connection Flare-Nut Connection (with Flare Nuts) Liquid φ 6.35 φ 6.35 φ 6.35 φ 9.53 φ 9.53 φ 9.53 φ 9.53 φ 9.53 φ 9.53 φ 9.53 Gas φ 2.7 φ 2.7 φ5.88 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 9.05 φ 22.2 Condensate Drain VP 25 (Outer Diameter) O 32 Approximate Packing Measurement m x 250 x 20 Model PI2.0FSNA PI2.5FSNA PI3.0FSNA PI-3.0 FSNQH PI4.0FSNA PI5.0FSNA PI-6.0 FSNQH PI8.0FSNA PI0FSNA Indoor Unit Power Supply AC Ph, 220~240, 220V/60Hz AC Ph, 220 AC Ph, 230 KW Normal Cooling Capacity KW Normal Cooling Capacity KW Normal Heating Capacity (Overall A Scale) Hi/ Me/ Lo db Dimension H X W X D 280 x 30 x x 30 x x 30 x X X x 90 x x 90 x X X x 550 x x 550 x 675 Net Weight Kg efrigerant 40A Air Flow ate Hi/ Me/ Lo m3/min 7/5/3 23/2/9.5 28/26/ /2/7 33/3/28 45/4/ /25/ /77.58/70 96/87.5/80 (cfm) External pressure (90) (90) Motor W Connection Liquid φ 6.35 φ 9.52 φ 9.52 φ 9.53 φ 9.52 φ 9.52 φ 9.53 φ 9.52 φ 9.52 Gas φ 2.7 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 5.88 φ 9.05 φ 22.2 Condensate Drain VP 25 (outer Diameter O 32 Approximate Packing Measurement m The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field

13 NEW 24 Ceiling Type Motion Sensor Control (Option) The air conditioning capacity is saved automatically depending on a situation and the amount of detected human activity by adopting the motion sensor kit. In addition, the operation can be stopped automatically if the absent situation continues for more than 30 minutes. The motion sensor can maintain the comfortable indoor environment and eliminate the unnecessary operation2. ): The default setting is 30 minutes. However, the setting is changeable. 2): The default setting is unning Operation. However, Automatic Stop can be selected by setting from the remote control switch. Detecting Area.8m Specifications Model Indoor Unit Power Supply Nominal Cooling Capacity ) Nominal Cooling Capacity 2) Nominal Heating Capacity (Overall A Scale) Hi2/Hi/Me/Lo Cabinet Color Dimensions H x W x D Net Weight efrigerant Air Flow ate Hi2/Hi/Me/Lo Motor Connections Liquid / Gas Condensate Drain Approximate Packing Measurement Detecting Area 0.8m from Floor Level db kg m 3 /min. (cfm) W m 3 9m 7.2m Depth 7m Ceiling Height 2.7m. The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. High Efficiency and Low Noise by New Fan unner Newly-developed fan runner is adopted. By improving shapes of fin and air outlet, the fan efficiency is improved and the low noise performance is achieved. PC-.5FSN3 PC-2.0FSN3 PC-2.5FSN3 PC-3.0FSN3 PC-4.0FSN3 PC-5.0FSN3 PC-6.0FSN3 4. 3,550 4, ,400 3, ,00 6,400 37/35/3/28 38/35/3/28 38/35/32/29 40/37/33/29 44/42/37/32 48/45/4/35 49/47/42/ x 960 x /3//9 (530/459/388/38) Flare-Nut Connection (With Flare Nuts) φ 6.35 /φ2.7 φ 6.35 /φ 5.88 φ 9.52 /φ 5.88 φ 9.52 /φ 5.88 VP ,000 9, ,800 9, ,400 2,500 AC φ, V / 50Hz, 220V / 60Hz ,300 25, ,00 24, ,300 29,000 9/6.5/4/.5 (67/583/494/406) Neutral White 235 x,270 x A 0.3 Air Outlet Diffuser 7,00 28, ,900 27, ,700 30,700 2/8.5/5.5/2.5 (742/653/547/44) 0,000 39, ,600 38, ,700 42,600 30/26.5/22/7 (,059/936/777/600) Fan Casing 4.5 2,500 49, ,000 47, ,800 54, x,580 x /3/25.5/20 (,236/,095/900/706) 0.38 New L-Shaped Fin 6.5 4,200 56, ,800 54, ,500 6,400 37/32.5/27/2 (,306/,48/953/742) Wall Type User Friendly Easy switching from wireless to wired remote controller by Dip Switch built-in the receiver part. All alarm code is displayed when using wireless remote controller by combining the flashing times of "Timer", "Filter/Defrosting". (All models) Compact and Stylish Design The unit has been designed with a flat front panel and a slim body. The front panel is easy to clean and should remain relatively dust free. For.0HP and.5hp units, their compact design with 830 width, allows for flexible and neat installation in narrow spaces. For 2.0 to 2.5HP units, unit width is,050 Front flat panel protects the unit from dust and facilitates maintenance work. For.0HP to 2.5HP units, you can easily remove the front flat panel and wash it with water. Koukin Filter: This unique anti-bacterial filter prevents bacterial growth in the air conditioner thus increasing the efficiency of the air conditioner. Specifications Model PK.0FSNA PK.5FSNA PK2.0FSNA PK2.5FSNA PK3.0FSNSM3 PK4.0FSNSM3 Indoor unit Power Supply AC Ph, 220~240, 220V/60Hz KW Normal Cooling Capacity KW Normal Cooling Capacity KW Normal Heating Capacity Sound Pressure level (Overall A Scale) Hi 2/ Hi/ Me/ Lo db 45/42/40/38 45/42/40/38 43/40/38/34 45/43/4/37 49/43/40/36 5/49/46/4 Cabinet Color White Dimension H X W X D 290 x 830 x x 830 x x 050 x x 050 x x 500 x 245 Net Weight Kg efrigerant 40A Air Flow ate Hi 2/ Hi/ Me/ Lo m3/min (cfm) /7/4/2 22/9/7/5 Motor W Connection Liquid φ 6.35 φ 6.35 φ 6.35 φ 9.52 φ 9.52 Gas φ 2.7 φ 2.7 φ 2.7 φ 5.88 φ 5.88 Condensate Drain VP 6 Approximate Packing Measurement m Srandard Accessories Wall Mounting Bracket. The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) ) 9.5 C WB (67 F WB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 2) 9.0 C WB (66.2 F WB) 6 C WB (43 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters Beneath the Unit. The above data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. 25

14 Floor Type Floor Concealed Type Compact Design Special emphasis has been placed on compatibility with interior design. The space saving design 630 in height, 220 in depth, fits into the space below bay windows and allows the unit to be freely installed without spoiling the aesthetics of a room. Specifications Model Floor Type Floor Concealed Type PF-.0FSN2E PF-.5FSN2E PFI-.0FSNQ PFI-.5FSNQ PFI-2.0FSNQ PFI-2.5FSNQ Indoor unit Power Supply AC Ph, 220~240 AC Ph, 220~240 KW Normal Cooling Capacity KW Normal Cooling Capacity KW Normal Heating Capacity Sound Pressure level (Overall db A Scale) Hi/ Me/ Lo Cabinate Color Spring White Dimension H X W X D 630X045X X045X X 900 X 202 System Equipment Total Heat Exchanger Specifications Model Indoor Unit Power Supply Air Flow ate 50Hz Hi/Me/Lo 60Hz External Pressure ) 50Hz Hi/Me/Lo 60Hz (Overall A Scale) at.5m from the unit under 2) 3) Hi/Me/Lo Dimensions H x W x D Net Weight Approximate Packing Measurement 50Hz 60Hz m 3 /h m 3 /h Pa Pa db db kg m 3 KPI-252 KPI-502 KPI-802 KPI-002 AC, V / 50Hz, 220V / 60Hz 250/250/65 500/500/ /800/670,000/,000/ /250/50 500/500/ /800/660,000/,000/720 65/40/20 50/60/30 40/00/70 60/00/80 00/50/20 200/60/20 230/20/80 200/0/ /25-26/ /25.5/2 275 x 735 x /30-3/ /28.5/23 37 x,06 x X 900 X /32-33/ /3/ x,004 x, X 70 X X 70 X 202 Net Weight Kg efrigerant 40A Air Flow ate Hi/ Me/ Lo m3/min 8.5/7/6 0/2/09 07/08/06 08/0/07 4.5/2.5/0.5 6/4/2 Motor W Connection Flare-Nut Connection (with Flare Nuts) Liquid φ 6.35 φ 6.35 φ 6.35 φ 6.35 φ 6.35 φ 9.53 Gas φ 2.7 φ 2.7 φ 2.7 φ 2.7 φ 5.88 φ 5.88 Condensate Drain φ 8.5OD φ 8.5OD VP 25 (outer Diameter O 32 Approximate Packing Measurement m /34-35/ /34/ x,23 x, The nominal cooling and heating capacity is the combined capacity of the HITACHI standard split system, and is based on the JIS standard B866. Indoor Air Inlet Temperature: 27 C DB (80 F DB) )9.5 C WB (67 F WB) 2)9.0 C WB (66.2 F WB) Outdoor Air Inlet Temperature: 35 C DB (95 F DB) Indoor Air Inlet Temperature: 20 C DB (68 F DB) Outdoor Air Inlet Temperature: 7 C DB (45 F DB) 6 C WB (43 F WB) Piping Length: 7.5 Meters Piping Lift: 0 Meter 2. The sound pressure level is based on following conditions..5 Meters from the Unit and.5 Meters from Floor Level. The left data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field.. Use it under the following conditions. KPI-802: 29Pa or more, KPI-002: 49Pa or more 2. The sound pressure level is based on following conditions..5 Meter beneath the unit and this data was measured in an anechoic chamber so that reflected sound should be taken into consideration in the field. 3. The sound pressure level is based on the total heat exchange mode. In case of the bypass ventilation mode, the sound pressure level is incrased by approximately db(a). All Fresh Air Indoor Unit Create Comfortable And healthy indoor environment Create a comfortable and healthy indoor environment by introducing fresh outdoor air. By heating or cooling fresh outdoor air to almost the same temperature as the room temperature, fresh ambient air can be adapted and then introduced into indoor room. Besides, after filtered, fresh outdoor air in transition seasons can be drawn to indoor room directly with no need of heating or cooling operation. While the fresh outdoor air is introduced, other indoor units don t bear fresh air load. Advanced Control Can be interfaced with II system, easy electrical wiring design and installation. Flexible line-up to set-free series All fresh air indoor units is applicable to SET-FEE outdoor units. Both SET-FEE indoor units and all fresh air indoor unit can be used in SET-FEE system. Higher external static pressure Better installation flexibility on site, longer ducts can be connected. Model PI-5.0KFNQ PI-8.0KFNQ Indoor unit Power Supply Normal Cooling Capacity Normal Heating capacity Sound Pressure level (overall A scall) Hi2/ Hi/ Me/ Lo AC φ, 220 Diamension H X W X D 370 x 320 x 800 AC φ, 220 PI- 0.0KFNQ AC φ, 220 PI- 2.0KFNQ AC 3φ, 380. The nominal cooling capacity and heating capacity are based on following conditions: Cooling operation conditions : 330c DB,280c WB, piping length: 7.5m, piping lift: 0m Heating operation conditions: 00c DB, -2.90c WB, piping length: 7.5m, piping lift: 0m (Heating capacity is tested when defrosting is not available) 2. The sound pressure level is based on the following conditions:.5 meter beneath the unit The above data was measured in an anechoic chamber so that reflected sound should not be taken into consideration in the field 3. An air filter with duct connector efficiency more than 50% needs to be attached to the duct system of the suction side at site. 4. When the resistance of the field-supplied duct is small, it may cause abnormal stoppage, malfunction, spraying water, etc., due to excessive air flow. And the duct which is to be connected to this unit, shall be insulated for dew protection. 5. All fresh air indoor unit is for processing fresh air load and not for stabilizing the room temperature. For adjusting the air conditioning load of the room, the additional air conditioner is required. 6. Under cooling mode, when outdoor temperature is lower than 200c, the system will automatically shift to ventilation operation; under heating mode, when outdoor temperature is higher than 50c, the system will automatically shift to ventilation operation; in case inlet temperature is below -70c, All fresh air indoor unit will stop PI- 6.0KFNQL AC 3φ, 380 PI- 6.0KFNQH AC 3φ, 380 PI- 20.0KFNQL AC 3φ, 380 PI- 20.0KFNQH AC 3φ, 380 PI- 20.0KFNQLF AC 3φ, 380 PI- 20.0KFNQHF AC 3φ, 380 KW KW db x 270 x x 270 x x 270 x x 950 x x 950 x x 950 x x 950 x x 950 x x 950 x 805 Net Weight Kg efrigerant 40A 40A 40A Air Flow ate H i/ Me / Lo m3/hrs External Pressure Pa Connection Liquid φ 9.53 φ 9.54 φ 9.55 φ 2.7 φ 2.7 φ 2.7 φ 5.88 φ 5.88 φ 5.88 φ 5.88 Gas φ 5.88 φ 9.05 φ 22.2 φ 25.4 φ 25.4 φ 25.4 φ 28.6 φ 28.6 φ 28.6 φ 28.6 Inlet Fresh Air Temperature ange m3 Cooling 20 Deg C to 43 Deg C, Heating -5Deg C to -5 Deg C Cooling 20 Deg C to 43 Deg C, Heating -5Deg C to -5 Deg C Cooling 20 Deg C to 43 Deg C, Heating -5Deg C to -5 Deg C Model PI-2.0KFNQ PI-6.0KFNQL PI-6.0KFNQH PI-20.0KFNQL PI-20.0KFNQH PI-20.0KFNQLF PI-20.0KFNQHF Indoor unit Power Supply AC 3φ, 380 AC 3φ, 380 AC 3φ, 380 AC 3φ, 380 AC 3φ, 380 AC 3φ, 380 AC 3φ, 380 KW Normal Cooling Capacity KW Normal Heating capacity Sound Pressure level (overall A db scall) Hi2/ Hi/ Me/ Lo Diamension H X W X D 486 x 270 x x 950 x x 950 x x 950 x x 950 x x 950 x x 950 x 805 Net Weight Kg efrigerant 40A 40A Air Flow ate H i/ Me / Lo m3/hrs External Pressure Pa Connection Liquid φ 2.7 φ2.7 φ 2.7 φ 5.88 φ 5.88 φ 5.88 φ 5.88 Gas φ 25.4 φ25.4 φ 25.4 φ 28.6 φ 28.6 φ 28.6 φ 28.6 Inlet Fresh Air Temperature ange m3 Cooling 20 Deg C to 43 Deg C, Heating -5Deg C to -5 Deg C 26 27

15 Optional Parts emote Controllers 4-Way Cassette Type HP Fresh Air Intake Kit T-Pipe Connection Kit 2 Duct Adapter 3.0 ~ 6.0 OACI-60K2 TKCI-60K PD-75A ( 75) eceiver Kit for Wireless Control CI CD PC PI PF(I) PK emote Control Switch PC-AF Compatible with the II The newly-adopted LED-backlit LCD provides enhanced legibility. Large, clear character display is realized by Full Dot Matrix LCD. The newly-adopted directional key provides optimized operation. The manual operation is facilitated by reducing number of switch buttons from 3 to 9. Schedule Timer provides the timer operations for un/stop and Temperature Setting. The weekly management is available by using this function. In addition Holiday Setting and Schedule ON/OFF setting are available. 4 type of menus are offered for flexible use as follows: Menu: Contains Schedule, Elevating Grill, etc. for users. Help Menu: Contains information provided by this remote control switch for users such as About Indication, Contact Information, etc. Test un Menu: This menu provides the functions installation of this remote control switch. Check Menu: This menu provides the functions for service and maintain Model PC-ALHN PC-ALHD PC-ALHP PC-ALHZ PC-ALHZF. It is necessary to use the Fresh Air Intake Kit to connect the fresh air intake duct to the unit. 2. Used when two air intakes ( 00 x 2) of the Fresh Air Intake Kit are changed to one air intake ( 50 x ). 3. Used when fresh air intake duct are connected to the indoor unit directly. 4. Used when both of the Fresh Air Intake Kit and Filter Box are used. 5. The electronic expansion valve kit (optional part EV-.5N) should be used with indoor unit wall type without expansion valve together. Piping Connection Kit Outdoor Unit HP Outdoor Unit Model Piping Set Number MC-20SNK MC-30SNK MC-30SNK 2 Multi-kits Multi-kit for 2 Pipe Heat Pump Operation < Line Branch > (First Branch) Strainer Kit Product Name Strainer Kit Model MEF-NP500A emote Control Switch PC-A Compatible with the II Wireless emote Control Switch PC-LH3A PC-LH3B Compatible with the II The PC-A has a design that matches the interior. The new large LCD display permits users to see the operating conditions and settings. The timer can be set at half-hour intervals up to 72 hours. All the functions can be selected by remote control switches. The PC-A monitors the operating conditions in the system and an alarm is issued if a problem occurs. One-touch handy operation, no wiring work required. Two or more units can be operated simultaneously by remote control. eceiver kit is required. A "self-diagnosis function" checks for problems on printed boards in indoor andoutdoor units. Equipped with energy-saving functions such as a preset temperature range limiting function for preventing excessive cooling/heating and a preset temperature automatic reset function, as well as an operation locking mechanism and the capability to prevent users from forgetting to turn off the system. (Function selection setting is required) Outdoor Unit HP Model 8 to0 E- 02SNK 2 to 6 E-62SNK 8 to 24 E-242SNK 26 to 54 E-302SNK NOTE: After the second branch, please refer to the technical manual. Half-size emote Control Switch PC-AH Compatible with the II The main function of this easy-to-use remote control system is temperature setting. Operation modes can be switched over (when function selection setting is made). Suitable for facilities used by various people, such as hotels. "2 remote control" or "group control" (up to 6 max.) can be used. If a problem occurs, an alarm code iediately shows the details of the problem. Control System : Applicable : Not Applicable CI-FSN3 CI- FSNQ CD-FSN2 PIZ- FSNQ PI- FSNQL(H) PI-FSNA PC-FSN3 PK-FSNA PK- FSNSM3 PC-A() PC-AF (5) (5) (5) (5) PC-LH3A PC-LH3B PF- FSN2E PFI- FSNQ KPI CIM- FSN3 7 Day Timer PSC-AT Compatible with the II By using PSC-AT with PSC-5S, PSC-AS or PC-A controllers, the air conditioners controlled by them can be operated according to a schedule. The timer can be set at 7-day intervals, and operation/stop can be set 3 times daily. emote control can be prohibited in accordance with the OFF time (when used with PSC-5S, PSC-AS and PC-A). Two types of weekly schedule (A and B) can be set, and can easily be changed for suer and winter. Settings are all digitally displayed, allowing operations and settings to be checked easily. The power failure backup function prevents the timer from being stopped by a power failure lasting up to 2 weeks. PC-AH(2) PSC-AT(3) PSC-AS(4) (6) (6) (6) (6) PSC-28WX,PSC-AS2048WXB (6) (6) (6) (6) PSC-A6S PSC-5K,0K,5K for PC-A PCC-A THM-2A Central Station PSC-AS Compatible with the II Up to 60 indoor units Up to remote control groups By connecting to the, up to remote control groups and 60 indoor units can be controlled. Up to 8 units can be connected to the. In addition to basic controls such as settings for operation/stop, the operation mode and temperature, the air quantity and auto louver can be set. If a problem occurs, an alarm code iediately shows the details of the problem. An external input terminal is provided as standard. External signals enable thefollowing functions: central operation/stop, demand control, emergency stop, central operation output, and central alarm output. Can be used in combination with the One-touch Controller. Centralized ON/OFF Controller PSC-A6S Compatible with the II Up to 60 indoor units Up to 6 remote control groups Only performs operation/stop control per remote control group. By connecting to the, up to 6 remote control groups and 60 indoor units can be controlled. Up to 8 units can be connected to the. Make sure to use it with a remote control switch. Indoor units cannot be used without a remote control switch. There are restrictions on remote group registration. Please contact our sales staff for more information. An external input terminal is provided as standard. External signals enable the following functions: central operation/stop, emergency stop, central operation output, central alarm output Can be used in combination with the Central Station

16 Network Systems II Hitachi's proprietary high-performance transmission system for connecting control wires between indoor and outdoorunits, and between a centralized control system and indoor/outdoor units, across two or more refrigerant systems. Flexible Wiring outes Absolutely no restrictions on the order of wiring, the wiring route and the number of branches. Simply connect to the adjacent units or the terminal block of a centralized control system. The transmission system for connection between outdoor and indoor units provides an extended system configuration and improved functions without sacrificing workability and the flexibility. egardless of Multi-Split System for Buildings or Packaged System for Coercial Use By providing a coon control function and wiring method, a multi-split air conditioning system for buildings and a packaged air conditioning system for coercial use are simultaneously used in the same system, and so are the EHP air conditioning systems. Just connect all the systems with twin core cables by crossover connection. Adapters or other appliances are not required. Compare with System Item Max. Number of efrigerant Group / System Address Setting ange of / efrigerant Group Max. Number of Indoor Unit / System Total Number of Devices in the same Max. Wiring Length : In case 4 units of PSC-5H are used. Mixture of and II 6 0 to Total,000m (5,000m) II 0 to The models supporting II can be mixed with the models supporting in the same system without any adaptor. Control System Device Outdoor Unit Indoor Unit Outdoor Units (Number of ef. Groups) (One) (II) System Example II II II/ Mixed II II/ Mixed : II Control Wiring Outdoor Unit (Max. efrigerant System) : A maximum 6 refrigerant groups can be connected in one system under the following conditions. Outdoor unit corresponding to Outdoor unit corresponding to II connected with the indoor unit corresponding to More than 7 indoor units can be connected with the outdoor unit depending on the outdoor unit capacity. In that case, 2 ref. groups are required for outdoor unit. Indoor Unit (Max. 60 Units) System Configuration Outdoor Unit SET-FEE FSN() Series SET-FEE FSXN and FSXNH Series II : The above example shows the case that central control device, indoor units and remote control switch are all corresponding to II system. Indoor Unit II or II II or II emote Control Switch II II II II CS-NET Central Station Central Station PSC-5S PSC-AS BMS Centralized ON/OFF 7 Day Timer Controller PSC-AT PSC-A6S HAC70-P HC-ABNP Setting ange of efrigerant Group ) Setting ange of Address ) Automatic eset of Setting Temperature 2) Operation Lock 2) Limitation of Setting Temperature ange 3) ON / OFF Timer Setting (72Hr.) 2) Different Operation Mode Indication 3) Indoor Unit Hot-Start Indication 3) Change of Indoor Unit ef. Group No. and Address 2) Outdoor Unit Comp. Pre-heating Indication / Cancel 2) Emergency Operation from emote Control Switch 4) 0 to 5 0 to 5 0 to 5 0 to 5 0 to 5 0 to 5 0 to 5 0 to 63 ): The range of ref. group setting and address setting is 0 to 5 when corresponding central controller is used. 2): These functions can be set by wired remote control switch (PC-A) only. 3): These functions can be set by wired remote control switch (PC-A) and half size remote control switch (PC-AH) only. 4): This function is not available depending on the outdoor unit type. 30 3

17 Network Systems CS-NET CS-NET is Hitachi's control network system for the SET-FEE FS series, SET-FEE FSNM and UTOPIA ranges. The flexibility of the SET-FEE system allows the internal data to be easily accessed and controlled by the user, with features including temperature, mode and fan speed setting and groupings. Building Management System 4 BACnet LONWOKS 2 HAC70-P or HAC-BX Outdoor Units Open Network Systems SET-FEE FSXNK HC- ABNP II or Central Station DX P.C. (Field supply) LAN (Ethernet) Central Station EZ Management Software PSC-AS2048WXB (CD-OM) PSC-A28WX PSC-AGT II or SET-FEE FSNMA II or Centralized ON/OFF Controller PSC-A6S II or Central Station PSC-AS PSC-5S 3 II or 7 Day Timer PSC-AT II or Interface You can select the air conditioner control interface depending on your needs to create a comfortable space. HC-ABNP (for BACnet ) Connecting the HC-ABNP to an (counication line between machines) allows control of up to indoor units. Up to eight HC-ABNP can be connected to the same. HAC70-P (for LONWOKS ) By using the HAC70-P adapter for LONWOKS to connect air conditioners to the total building control system, air conditioners can be centrally controlled. HAC-BX (for LONWOKS ) Connection Method to Quantity of Connection Control Item at Monitoring Item at Connection Method to Quantity of Connection Control Item at Monitoring Item at HAC-BX E (Standard) Connection Method to Quantity of Connection Control Item at Monitoring Item at HAC-BX E (Option A) Connection Method to Connection by IEEE802.3 Compliance (00BASE-TX/0BASE-T) to BACnet Network Up to per BACnet Adaptor UN/STOP Operation Mode Setting Temperature Setting Fan Speed Setting UN/STOP State Notification Alarm Signal Notification Operation Mode State Notification Fan Speed State Notification Connection by SNVT (Standard Network Variable Type) to LONWOKS Network 8 emote Control Groups (Max. 20 indoor Units) On/Off Order Operation Mode Setting On/Off State & Alarm Operation Mode State On/Off Order Operation Mode Setting On/Off State & Alarm Operation Mode State Available / Not Available for Operation by emote control Switch Filter Sign eset Indoor Suction Temperature Notification Alarm Code Notification Counication Abnormality Notification Filter Sign Temperature Setting All On/Off Order Temperature Setting Individual Thermostat State Connection by SNVT (Standard Network Variable Type) to LONWOKS Network Temperature Setting All On/Off Order Temperature Setting Individual Thermostat State Connection by SNVT (Standard Network Variable Type) to LONWOKS Network A HAC-BX can connect to multiple with transmission terminal to 8 PCB. Quantity of Connection Control Item at On/Off Order Operation Mode Setting Temperature Setting All On/Off Order Fan Speed Setting.C.Sw Permission/Prohibition CI CD emote Controllers PC-AF PI PK PFI PC-A PC PF KPI 3 PC-LH3A PC-LH3B eceiver Kit PC-AH : BACnet is a registered trademark of ASHAE. 2: LONWOKS is a registered trademark of Echelon Corp. 3: Compatible 4: Though connection with II is available, the resulting performance is equivalent to that of the specifications. Points for control and monitor have been increased to meet more points. (Points for control and monitor is 8 times larger than HAC70P-.) You can select the number of controls, monitor, and what to control in the indoor unit from three choices (Standard, Option A and Option B) as needed. Monitoring Item at HAC-BX E (Option B) Connection Method to Quantity of Connection Control Item at Monitoring Item at On/Off State & Alarm Inlet Air Temperature Connection by SNVT (Standard Network Variable Type) to LONWOKS Network 32 On/Off Order Operation Mode Setting Temperature Setting On/Off State & Alarm Operation Mode State Fan Speed Setting Fan Speed Setting.C.Sw Permission /Prohibition Temperature Setting Louver Position Alarm Code All On/Off Order Louver Position Setting Inlet Air Temperature Outlet Air Temperature Outdoor Air Temperature 32 33

18 Network Systems Central Station Central Station EZ PSC-AGT Eazy control with 8.5 inch color touch panel Its down-to-detail control functionalities, such as Weekly Scheduling, Accumulated Work Hours, etc., help you save energy. Up to remote-controlled groups and up to 60 indoor units can be connected to the single air-conditioning system. Functions Monitor Function un/stop/abnormality Operation Mode Setting Temperature Setting Fan Speed Setting Louver CS Operation Prohibited Setting Filter Sign Alarm Code Accumulated Operating Time un/stop Operation Mode Temperature Setting Control Function Fan Speed Louver CS Operation Prohibited Filter Sign eset : All Groups un/stop coand signal exception function for selected groups is available by Exception of un/stop Ope. function. Specification for Management Computer Counication Unit Counication Line Counication Method Synchro System Counication Speed Wiring Length Units of Adopting for II Non-Polar 2-Wire Half-Duplex Counication Asynchronous (start-stop synchronous counication) 9,600bps,000m (Total Length) Outdoor Unit Indoor Unit Central Controller Total Unit Number Connecting II Unit Number : Connecting unit quantity indicates the maximum unit numbers which is possible to connect in the same (Control Wiring). Central Station DX PSC-A28WX + PSC-AS2048WXB Managing maximum 2,048 groups of air-conditioners. Up to 2560 units of indoor units can be controlled and monitored with just one computer. Advanced functions but easy control for huge air-conditioning system. Specification for Management Computer OS CPU Memory Free Space in Hard Disk Drive Display esolution Drive Interface Functions Energy Saving Function Facility Control and Monitor Function (Level Signal Only) Windows XP (English version 32 bit) CPU Intel Core TM 2Duo.8GHz or more 2GB or more Minimum 5GB for each + 0.3GB for each additional EFGN Cycle. (Further additional 6GB or more is required for Check-Unit data collection.),280 x,024 CD-OM Drive (for upon installation only) IEEE (0BASE-T/00BASE-TX) (With wake-on-lan function2) USB S-232C (2) : Use the management computer exclusively to this system. 2: LAN with wake on LAN function or S-232 Interface is required for UPS. 3: Management computer is assumed to be always ON. It is strongly recoended to use computer for server or industrial use and/or to create hard disk mirror. 4: Durable period for management computer may differ from that of air conditioners. Update periodically and discuss updating procedure in advance. un/stop C (emote Control Switch) Operation Prohibition Shifting Set Temperature (For Cool/Dry to Fan and Stop during Heating) Switching Mode (Cool/Dry to Fan and Stop during Heating) Outdoor Unit Capacity Control (Only if supported) (0, 40, 50, 60, 70, 80, 90, 00%) Control Monitor un/stop Operation Mode (Cool/Heat) Emergency Stop (Only for Supporting this function) un/stop Operation Mode (Cool/Heat) Alarm State 34 35