Products and prices. CLIMATE TECHNOLOGY feels better, works better.

Transcription

1 Products and prices CLIMATE TECHNOLOGY feels better, works better.

2 Long-term leaders in climate management Get to know the specialist in the Netherlands in the field of air heating, radiant heat systems, air conditioning and ventilation: Mark Klimaattechniek. Mark has a rich history. It was originally a Dutch family company. Mark has been specialising in climate management for large buildings since Over this period Mark has developed into a market leader in the Netherlands and abroad. Mark now offers unmatched quality in climate control to our customers in countries that include Belgium, Ireland, Germany and Poland. Mark takes the lead. History of innovation In 1945, Mark was established by the van der Mark brothers in Veendam. At the time it went under the name of Ingenieursbureau Gebroeders Van der Mark NV. The brothers began with the production and sale of bending pumps and coal-fired air heaters. These were followed by oil-fired heaters and ribbed radiators. At the time, only standard designs of air heating devices were available. From the mid-fifties the two brothers focussed increasingly upon the heating of large buildings. To this end they built suspended gas-fired air heaters. This gave rise to the GS series, a unique system that is to this day the leader in the European heating market. The engineers of Mark continue to innovate. Over the years they have developed many new solutions for hall heating, including innovative high-efficiency gas-fired and water-fed air heating and radiant heat systems. The power-saving Mark Ecofan, the use of sea-water resistant aluminium for external equipment and the black radiant tube heaters with a length of up to 50 metres followed in the eighties and nineties. Mark is still characterised by this innovative power. Complete systems for air treatment and heat pumps are now part of our range. The full range of products in climate technology Since 1983, Mark has been owned by the Bruinsma family. Director G.J.H.A. Bruinsma ( ) expanded the innovative company into an internationally operating organisation. An organisation that is unique in Europe. Not surprising Mark is the market leader in climate technology: it produces the full range of products for temperature management and air conditioning in industrial and utility buildings. This means that our customers can find everything for Mr G.J.H.A. Bruinsma ( ) their entire climate management system from a single supplier. The Mark Holding consists of six companies: six sales and service establishments in the Netherlands, Germany, Belgium, Ireland, Poland and Romania and two production companies: one in the Netherlands and one in Ireland. Despite this international character the Bruinsma family still runs the company as a family company, with the needs of the customer always coming first. In countries where Mark has no establishments of its own we have a network of distributors. We have over 200 professionals at our disposal and can thus serve the entire European market. Furthermore, Mark is one of the few manufacturers to have its own maintenance service and commision enginers. Mark thus builds upon a long tradition of quality and satisfied customers.

3 Products and prices 1 Juli 2011 All prices in this catalogue are gross prices without VAT and valid until The prices shown following are in Euro. For UK customers please convert the Euro prices using the conversion rate available on Prices quoted using the rate on quotation date will remain valid for 30 days. Our Prices are subject to change. Copyright 2014 Mark Climate Technology, Veendam. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without prior written permission of the publisher. 1

4 4

5 Contents Air heaters GS+ Gas-fired high performance air heater with axial fan 7 HR air heater with modulating premix burner for unrestricted outlet into the room. Output from 35 to 150 kw. GC+ Condensing high efficiency air heater with centrifugal fan 13 HR air heater with modulating premix burner including for duct connection. Output from 35 to 150 kw. GSW+ Condensing high efficiency air heater with axial fan 18 High efficiency gas-fired air heater with a modulating premix burner for free discharge in space. Output from 27 to 63 kw. GSD Gas-fired air heater with axial fan 22 Air heater with atmospheric burner and electrical ignition for unrestricted outlet into the room. Output from 21,8 to 91,8 kw. Shop heater Gas-fired air heater with axial fan and compact design 28 Compact air heater with atmospheric burner and electrical ignition for unrestricted outlet into the room. Output from 13,1 to 35,9 kw. GC Gas-fired air heater with centrifugal fan 33 Air heater with atmospheric burner and electrical ignition including for duct connection. Output from 20 to 91,8 kw. Rooftop Gas-fired rooftop heater 38 Rooftop with gas-fired air heater. Output from 20 to 367,2 kw. Föhn Gas and oil-fired heat air heater 42 Vertical or horizontal air heater with burner. Output from 50 to 415 kw. G-Type Gas or oil-fired vertical air heater 47 Vertical or horizontal air heater with burner. Output from 30 to 1050 kw. Calflo Gas-fired make-up air heater 51 Air heater with burner located directly in the air flow. Output from 64 to 896 kw. 3

6 Ventilation and recirculation equipment ECOFAN W Recirculation fan 55 Recirculation fan with thermostatic control. Air displacement 4,000 to 14,000m³/h. ECOFAN P Recirculation fan 58 Air displacement 22,000 m³/h. MDV Roof fan 60 Roof fan with centrifugel fan. Air displacement 1,840 to 15,600 m³/h. Air conditioning Klimat Air handling unit 65 Modular air handling unit, aluminium. Double-walled insulation. AIRSTREAM Heat recovery unit 73 High-efficiency heat recovery unit Air displacement 600 to 16,800 m³/h. Gas-fired radiant heaters INFRA Gas-fired black radiant tube heater with double tube 78 Gas-fired black radiant tube heater with atmospheric burner and electrical ignition. Powers from 10 to 50 kw. INFRA LINE Gas-fired black radiant tube heater 87 Gas-fired black radiant tube heater with atmospheric burner and electrical ignition. Output from 50 to 100 kw. INFRA HT Gas-fired high temperature radiant heater 90 Gas-fired high temperature radiant heater with ceramic burner and electrical ignition. Output from 6.5 to 46.8 kw. Water-supplied radiant heating INFRA AQUA Water-supplied aluminium radiation panel 95 Aluminium radiation panel with a RAL 9010 coating INFRA AQUA ECO Water-supplied steel radiation panel 98 Steel radiation panel, available in 4 or 6 metres as standard INFRA AQUA KP Water-supplied ceiling strips 101 Ball-resistant ceiling strips for heating. 6

7 Water-supplied underfloor heating BLUE 103 Hot water-supplied air heaters TANNER MDA Water-supplied air heater with axial fan 105 Water-supplied air heater with copper/aluminium heat exchanger. Output from 8.3 to 110,6 kw. TANNER MDC Water-supplied air heater with centrifugal fan 115 Water-supplied air heater with copper/aluminium heat exchanger. Output from 8.3 to 110,6 kw. TANNER FBA Water-supplied air heater with axial fan 119 Water-supplied air heater for ceiling installation with RAL9010 coating Output from 18.2 to 44.4 kw. TANNER FBA ULTRA Design water-supplied air heater with axial fan 123 Design water-supplied air heater for ceiling installation with RAL9010 coating, suitable for heating and cooling. Powers from 18.2 to 44.4 kw. TANNER ZDA Water-supplied air heater for system ceiling installation 127 Water-supplied air heater for system ceiling with RAL9010 coating suitable for heating. EASYAIR Water-supplied or electrical air curtain 131 Water-supplied or electrical air curtain for retail or industrial applications Output from 6.5 to 54.8 kw. Hydraulic bending machine BENDER Hydraulic pipe bending machine 138 Hydraulic pipe bending machine for bending thick-walled pipes. Miscellaneous Control equipment 141 Overview of the control options provided by Mark. Supply air systems 158 7

8 8

9 GS+ Environmentally friendly heating with the GS+ Mark manufactures a gas-fired, highperformance air heater with an axial fan. This condensing equipment provides efficiency greater than 106% (lower value). Heat is generated via a modulating (5:1) premix-burner which results in very low gas consumption. The GS+ is operated using an OpenTherm clock thermostat. The GS+ is suitable in many situations due to its extensive capacity range from 35 to 150 kw. The GS+ is designed to heat garages, warehouses, distribution centres and showrooms. Mark provides a 2 year full product warranty as standard and up to 10 years reducing warranty with the stainless steel heat exchanger. Features of the Mark GS+ Efficiency >106% Energy-saving Environmentally-friendly Modulating premix burner Outlet temperature sensor Low temperature rise of the exit air Low thermal stratification of the heated air Stainless steel heat exchanger Condensation/frost sensor Corrosion-resistant aluzinc housing OpenTherm thermostat or 0-10 volt regulation Standard equipment stainless steel combustion chamber & heat exchanger Closed combustion circuit Advanced modulating burner technology Electronic ignition Low NO x Powerful axial fan(s) Downflow hood with horizontal louvres CE-approval PIN 0063BP3341 Eco-label: BP005 (NL) HR-TOP (BE) Carbon trust (UK) 9

10 Dimensions A = Horizontal louvres B = Gas connection C = Combustion air inlet D = Flue gas exhaust E = Electrical connection F = Axial fan G = Condensation connection diam. 40 mm Type a b c d e f g h i j k l m n o p q r s u / / / Technical information Delta T max. 45K G25 = Natural gas G20 = Natural gas G31 = Propane G30 = Butane Type Nominal load (upper value) Nominal load (lower value) Efficiency at 100% full load Efficiency at 30% partial load Efficiency at min. load Burner turndown ratio Gas consumption G20 (15 C) Gas consumption G25 (15 C) Gas consumption G30 (15 C) Gas consumption G31 (15 C) Air displacement (20 C) Delta T ( T) Throw Weight of GS+ Noise level (5 m, side) Electrical power at 230V Consumed current kw 38,8 44,4 66,7 88,8 114,4 166,7 kw 34, % 95,7 94,8 94,2 94,3 94,2 94,8 % 105,7 105,7 105,8 105,8 105,6 104,9 % 107,3 107,3 107,4 106,2 106,3 107,0 +/- 5:1 5:1 5:1 5:1 5:1 5:1 m 3 /h 3,65-0,88 4,18-0,88 6,22-1,34 8,16-2,25 10,67-2,94 15,30-3,37 m 3 /h 4,10-1,02 4,73-1,02 7,03-1,47 9,30-2,57 11,98-3,23 17,05-3,75 kg/h 2,92-0,72 3,46-0,72 5,05-1,11 6,70-1,89 8,48-2,48 12,35-2,72 kg/h 2,68-0,64 3,17-0,64 4,72-1,04 6,22-1,72 8,03-2,29 11,69-2,57 m 3 /h K 20,0 22,8 26,3 22,8 23,5 23,1 m kg db(a) W A 1,4 1,4 1,8 3,0 3,75 7,0 Air heaters - 10

11 Accessories flue gas exhaust Extension set 2 90 elbow 3 45 elbow 4 Single flue set horizontal 5 Single flue set vertical Lead flashing for pitched roof 7 Adhesive plate 8 Flexible lead flashing for cladded roof Accessories additional sections = Horizontal louvers (standard) = Vertical louvres = Downflow hood 45 = Diffuser (2 x 45 ) and horizontal louvres = Vertical louvres for diffuser = Set of wall mounting brackets = Shock absorbers set = Reversible wall bracket Assembly/location suggestions

12 Controls S+/GC+ Isolator switch GS+/GC+ (optional) Room sensor (optional) Room sensor (1 or 4) or or BMS or OpenTherm room thermostat Pintherm Switchbox W9 GS+ Isolator switch Reset button Isolator switch Reset button Isolator switch Reset button max. 8 units Signal amplifier (optional) Room sensor (1 or 4) or BMS Pintherm Project-specific controls available on request. Air heaters - 12

13 Prices Mark GS+ PRODUCT Code nr. Description Price GS+ 35,gas-fired condensating air heater, 35 kw 4641 GS+ 40,gas-fired condensating air heater, 40 kw 4641 GS+ 60,gas-fired condensating air heater, 60 kw 5769 GS+ 80,gas-fired condensating air heater, 80 kw 6950 GS+ 100,gas-fired condensating air heater 103 kw 7922 GS+ 150,gas-fired condensating air heater, 150 kw for other gas types ask our sales department ACCESSORIES - EXHAUST OUTLET Code nr. Description Price GS+ 35 en GS Single flue set vertical GS+ 35/40, stainless steel ø 80 mm Single pipe horizontal GS+ 35/40, stainless steel ø 80 mm Set 2 pipes stainless steel GS+ 35/40, ø 80 mm, length 500 mm Set 2 pipes stainless steel GS+ 35/40, ø 80 mm, length 1000 mm Set smooth elbows stainless steel GS+ 35/40, ø 80 mm, Set smooth elbows stainless steel GS+ 35/40, ø 80 mm, Roof flashing ø 80 mm, GS+ 35/ Dektite 4-7, GS+ 35/ Lead flashing 20 to 35 GS+ 35/40, only in combination with GS+ 60, GS+ 80, GS Single flue set vertical GS+ 60/80/100, stainless steel ø 100 mm Single pipe horizontal GS+ 60/80/100, stainless steel ø 100 mm Set 2 pipes stainless steel GS+ 60/80/100, ø 100 mm, length 500 mm Set 2 pipes stainless steel GS+ 60/80/100, ø 100 mm, length 1000 mm Set smooth elbows stainless steel GS+ 60/80/100, ø 100 mm, Set smooth elbows stainless steel GS+ 60/80/100, ø 100 mm, Reducer kit GS+ 100*, ø mm Roof flashing ø 100 mm, GS+ 60/80/ Dektite 4-7, GS+ 60/80/ Lead flashing 20 to 35 GS+ 60/80/100, only in combination with GS+ 100*, GS Single flue set vertical GS+ 100*/150, stainless steel ø 130 mm Single pipe horizontal GS+ 100*/150, stainless steel ø 130 mm Set 2 pipes stainless steel GS+ 100*/150, ø 130 mm, length 500 mm Set 2 pipes stainless steel GS+ 100*/150, ø 130 mm, length 1000 mm Set smooth elbows stainless steel GS+ 100*/150, ø 130 mm, Set smooth elbows stainless steel GS+ 100*/150, ø 130 mm, Roof flashing ø 100 mm, GS+ 100*/ Lead flashing 20 to 35 GS+ 150, only in combination with ACCESSORIES Code nr. Description Price Vertical louvre GS+ 35/ Vertical louvre GS Vertical louvre GS Vertical louvre GS Vertical louvre GS Diffuser with horizontal louvre GS+ 35/ Diffuser with horizontal louvre GS Diffuser with horizontal louvre GS Diffuser with horizontal louvre GS Diffuser with horizontal louvre GS Bird Mesh 80mm Bird Mesh 100mm 16 13

14 Vertical louvre for diffuser GS+ 35/ Vertical louvre for diffuser GS Vertical louvre for diffuser GS Vertical louvre for diffuser GS Vertical louvre for diffuser GS Downflow hood 45 GS+ 35/ Downflow hood 45 GS Downflow hood 45 GS Downflow hood 45 GS Downflow hood 45 GS ACCESSORIES - CONTROL Code nr. Description Price OpenTherm clock thermostat with reset External room sensor for OpenTherm clock thermostat Pintherm+ programmable room thermostat, 230V (4A) External room sensor for PinTherm Converter module 0-10V from 3 units Isolator switch, separate delivery, 230 Volt (2 poles) Isolator switch, pre-wired, 230 Volt (2 poles) Resetbutton Condensate pump kit (separate delivery) Condensate neutralizing kit (separate delivery) 67 for function explanation see chapter on on control ACCESSORIES - ASSEMBLY Code nr. Description Price Set wall mounting brackets (2 pieces), GS+ 35/40/60/80/ Set wall mounting brackets (2 pieces), GS Set shock absorbers for wall mounting brackets, GS+ 35/40/60/80/ Set shock absorbers for wall mounting brackets, GS REmark CE-approval only in combination with the Mark single pipe vertical or horizontal * For GS+ 100 with long flue gaspipes, use ø mm transition piece. See Technical manual. Air heaters - 14

15 GC+ Custom-made environment friendly heating with standard Mark-equipment In addition to the High Efficiency air heater, the Mark-range also includes a gas-fired, high performance air heater with a centrifugal fan. The GC+ is particularly suited for connection to duct systems, or systems where high pressure is required. This condensing equipment provides efficiency greater than 106% (lower value). Heat is generated via a modulating (5:1) premix burner which results in very low gas consumption. The GC+ is operated using an OpenTherm clock thermostat as standard. Other operating options are also available. An extensive range of additional sections has been developed for the GC+. This ensures the standard GC+ can be simply and affordably adapted to any project specification. The comprehensive capacity range ( kw) also means the area of application for this type of equipment is virtually limitless. The GC+ can additionally be incorporated into an air handling unit. The GC+ is designed to heat garages, warehouses, workshops, schools and sports halls among other applications, with or without a duct system. Mark provides a 2 year full product warranty as standard and up to 10 years reducing warranty with the stainless steel heat exchanger. Features of the Mark GC+ Centrifugal fan with forward curved blades 3-phase electric motor 1400 min -1 V-belt transmission Shock absorbers Low noise level Variable air volume Variable delta T System air pressure up to 300 Pa Fan outlet position: front side Low maintenance Options Centrifugal fan with backward curved blades Insulated fan casing Outdoor version available 15

16 Dimensions U S * N ** H E I B W1 W2 V1 X V3 V2 V4 X 50 X C X X F G C ø P Q ø D R * = Gas connection ** = Condensation connection ø40mm T B C D E F G H I Ø P Q R S U V1 V2 V3 V4 W1 W2 X / / / X X Technical information Type * * 150 Fan twin twin twin twin twin Dimensions max Air displacement m 3 /h minimum Air displacement m 3 /h nominal Air displacement m 3 /h maximum Fan: Pa * Increased air displacement Air heaters - 16

17 Type Nominal load (upper value) Nominal load (lower value) Efficiency at 100% full load Efficiency at 30% partial load Efficiency at min. load Burner turndown ratio Gas consumption G20 (15 C) Gas consumption G25 (15 C) Gas consumption G30 (15 C) Gas consumption G31 (15 C) Minimum air displacement (20 C) Delta T ( T) Nominal air displacement (20 C) Delta T ( T) Maximum air displacement (20 C) Delta T ( T) kw 38,8 44,4 66,7 88,8 114,4 166,7 kw 34, % 95,7 94,8 94,2 94,3 94,2 94,8 % 105,7 105,7 105,8 105,8 105,6 104,9 % 107,3 107,3 107,4 106,2 106,3 107,0 +/- 5:1 5:1 5:1 5:1 5:1 5:1 m 3 /h 3,65-0,88 4,18-0,88 6,22-1,34 8,16-2,25 10,67-2,94 15,30-3,37 m 3 /h 4,10-1,02 4,73-1,02 7,03-1,47 9,30-2,57 11,98-3,23 17,05-3,75 kg/h 2,92-0,72 3,46-0,72 5,05-1,11 6,70-1,89 8,48-2,48 12,35-2,72 kg/h 2,68-0,64 3,17-0,64 4,72-1,04 6,22-1,72 8,03-2,29 11,69-2,57 m 3 /h K 26,6 30,3 30,3 30,3 31,3 30,5 m 3 /h K 20,0 22,8 26,3 22,8 23,5 23,1 m 3 /h K 13,9 15,8 19,8 16,7 18,1 20,5 Delta T max. 45K External pressure Pa, more on request G25 = Natural gas G20 = Natural gas G31 = Propane G30 = Butane Accessories flue gas exhaust Extension set 2 90 elbow 3 45 elbow 4 Single flue set horizontal 5 Single flue set vertical 6 Lead flashing for pitched roof 7 Adhesive plate 8 Flexible lead flashing for cladded roof Assembly/location suggestions 17

18 Accessories additional sections a a 7b = Weather grill > % fresh air intake 2 = Transition piece 3 = Damper 6 = Mixing box, 3 sides 7a = Mixing box, air intake bottom 7b = Mixing box, air intake top 10 = Empty section 8/11 = Filter casing G4 or F5/F7 13 = Fan casing 16 = Horizontal louvres 17 = Vertical louvres 18 = Downflow hood = Diffuser 2 x = Downflow hood = Hood 24 = Transition piece 10 8 Air heaters - 18

19 Controls + Isolator switch (optional) Room sensor (optional) Room sensor (1 or 4) or or BMS or OpenTherm room thermostat Pintherm Remote control panel (project-based) Isolator switch Reset button Isolator switch Reset button Isolator switch Reset button Signal amplifier (optional) Room sensor (1 or 4) or BMS Pintherm Project-specific controls available on request. 19

20 GSW+ Revolutionary high performance gas-fired air heater Mark introduces the first plug and play high-performance condensing air heater based on proven boiler technology. This unprecedented concept will take the upper hand in the near future in the global air heater market. In this air heater, called GSW +, is a high-performance gas-fired boiler, heat exchanger and an axial fan integrated. The combustion efficiency of the GSW + runs at up to 108% (uv)!! Features of the Mark GSW+ Very high efficiency % (uv) Combination of proven techniques in one unit Condenses in each modulation mode, even in full load!! Modulating premix burner (4:1) Easy to install Easy to maintain Copper-aluminium heat exchanger (water tube) Stainless steel heat exchanger with plastic housing (gas tube) Plastic flue material applicable Low unit weight Flue system through wall and/or roof Modulates on the basis of most economical consumption Plug and play Optional Modulating EC axial fan Centrifugal fan for units with a channel connection 20

21 Dimensions Gas connection Type a b c d GSW GSW , GSW GSW Technical information Type GSW+ 30 GSW+ 40 GSW+ 50 GSW+ 70 max. min. max. min. max. min. max. min. Nominal load (uv.) (kw) 30 7, , ,5 Nominal load (lv.) (kw) 27 6, Efficiency (%) Gas consumption G20 (15 C) (20 mbar) (m 3 /h) Gas consumption G25 (15 C) (25 mbar) (m 3 /h) Gas consumption G31 (15 C) (37 mbar) (kg/h) Air displacement (m 3 /h) * * * * Delta T (K) 25,6 8,0 28,5 8,8 27,3 8,5 28,0 8,7 Weight of GSW+ (kg) Combustion air inlet (ø mm) Flue gas exhaust (ø mm) Gas connection (ø) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Condensation connection (ø mm) Current 230/240 V 1F ~50 Hz * In optional modulating EC fan. G25 = Natural gas / G20 = Natural gas / G31 = Propane 21

22 Air heaters - 22 Controls

23 Prices Mark GSW+ Product Code nr. Description Price GSW+ 30, high-efficiency gas-fired air heater, 27 kw GSW+ 40, high-efficiency gas-fired air heater, 36 kw GSW+ 50, high-efficiency gas-fired air heater, 45 kw GSW+ 70, high-efficiency gas-fired air heater, 63 kw 5263 other gas types on request. ACCESSORIES - EXHAUST OUTLET Code nr. Description Price Vertical flue for GSW + Plastic ø 80mm Horizontal flue for GSW + Plastic ø 80mm Set plastic extension pipes for GSW +, ø 80mm, length 500 mm Set plastic extension pipes for GSW +, ø 80mm, length 1000 mm Set of smooth plastic elbows for GSW +, ø 80mm, Set of smooth plastic elbows for GSW +, ø 80mm, Adhesive plate for roof duct ø 80mm, only in combination with roof duct Lead flashing for roof slope, only in combination with roof duct Isolator switch 47 ACCESSORIES - assembly Code nr. Description Price Pivoting wall bracket for wall mounting (GSW +30/ 40/ 50/ 70) 188 ACCESSORIES - control Code nr. Description Price COMTHERM programmable room thermostat Condensate pump kit (separate delivery) Condensate neutralizing kit (separate delivery) 67 23

24 GSD The indestructible bestseller We have manufactured more than GS gas-fired suspended air heaters over the past 65 years. In the light of all the experience gathered over previous years, Mark provides a 2 year product warranty and a 10 year reducing warranty on the standard stainless steel heat exchanger. A 25 year lifespan is no exception for a GSD. The Mark GSD can be used in many areas of application, and the heat exchanger, for example, can be used in garages, warehouses, workshops and other large rooms. The extensive range of 9 different appliances varying from 20 kw to 95 kw means precisely the right appliance can be selected whatever the project. Features of the Mark GSD Efficiency 90% Closed appliance Low noise level Stainless steel AISI 409 heat exchanger Stainless steel AISI 321 burners Aluzinc coating Axial fan Electronic ignition Reliable Long lifespan 2-wire control Control of 1-8 units is possible Zone optimisation control possible temperature gradient control possible 24

25 Dimensions A = Horizontal louvres B = Gas connection ¾ internal C = Combustion air inlet D = Flue gas exhaust E = Electrical connection F = Axial fan ø f g h j k l e A B C D E B M10 [4x] F m x a 196 a b c Type a b c e f g h j k l m 20/ / ,5 30/ / / / Technical information Type Nominal power kw 21, ,7 43,6 54,5 65,3 80,4 87,1 95,8 Nominal load (lower value) kw 24,2 30,2 36,3 48,4 60,5 72,6 89,3 96,8 106,5 Air displacement (15 C) m 3 /h Gas consumption G25 (15 C natural gas) m 3 /h 3 3,6 4,4 5,9 7,1 8,7 10,6 11,6 12,8 Gas consumption G20 (15 C natural gas) m 3 /h 2,6 3,1 3,8 5,1 6,3 7,6 9,3 10,1 11,1 Gas consumption G31 (15 C propane) kg/h Gas consumption G30 (15 C butane) kg/h Delta T ( T) K Weight of GSD kg Throw m Electrical power at 230V W Consumed current A 3,2 3,2 3,2 3,2 3, Sound level at 5 metres db(a)

26 Controls Isolator switch (optional)* Room sensor or or Basetherm (Room thermostat) Optitherm (Clock thermostat) Interface module (link BMS) Isolator switch Isolator switch Isolator switch (optional)* Room sensor (optional)* Room sensor (optional)* Room sensor or or Basetherm (Room thermostat) Optitherm (Clock thermostat) Interface module (link BMS) * Only in combination with Optitherm Air heaters - 26

27 Accessories flue gas exhaust Extension set 2 90 elbow 3 45 elbow 4 Single flue set horizontal 5 Single flue set vertical 6 Lead flashing for pitched roof 7 Adhesive plate 8 Flexible lead flashing for cladded roof Type The maximum length of the intake and flue pipe is 6m incl. 2 sets of 90 elbows. Type 95 ø100 The maximum length of the intake and flue pipe is 1m incl. 1 sets of 90 elbows. Type 95 ø130 The maximum length of the intake and flue pipe is 6m incl. 2 sets of 90 elbows. Different flue plans available on request. Accessories additional sections = Horizontal louvers (standard) = Vertical louvres = Downflow hood 45 = Diffuser (2 x 45 ) and horizontal louvres = Vertical louvres for diffuser = Set of wall mounting brackets = Shock absorbers set = Frame Assembly/location suggestions 27

28 Prices Mark GSD PRODUCT - GAS FITTED AIRHEATER, NATURAL G20 Code nr. Description Price GSD 22, nominal power, 21,8 kw 2169 GSD 27, nominal power, 27,2 kw 2247 GSD 35, nominal power, 32,7 kw 2387 GSD 45, nominal power, 43,6 kw 2648 GSD 56, nominal power, 54,5 kw 2908 GSD 65, nominal power, 65,3 kw 3474 GSD 80, nominal power, 80,4 kw 3813 GSD 90, nominal power, 87,1 kw 4156 GSD 95, nominal power, 91,8 kw 4359 for other gas types ask our sales department ACCESSORIES - EXHAUST OUTLET Code nr. Description Price GSD 22 t/m Single flue set vertical GSD 22-45, ø 80 mm. External diameter 130 mm Single pipe horizontal GSD 22-45, ø 80 mm. External diameter 130 mm Roof flashing GSD only in combination with Lead flashing 20 tot 35 GSD 22-45, only in combination with Dektite 4-7 GSD Set 2 pipes ø 80 mm for GSD 22-45, length 1000 mm Set elbows 90 (3D) GSD 22-45, ø 80 mm (2 pieces) Set elbows 45 (3D) GSD 22-45, ø 80 mm (2 pieces) Reducer kit GSD (2 x ø 80 - ø 100 / 2x ø ø 80) 93 Code nr. Description Price GSD 56 t/m Single flue set vertical GSD 56-95, ø 100mm. External diameter 160 mm Single pipe horizontal GSD 56-95, ø 100mm. External diameter 160 mm Roof flashing GSD only in combination with Lead flashing 20 tot 35 GSD 56-95, only in combination Dektite 4-7 GSD Set 2 pipes ø 100 mm for GSD 56-95, length 1000 mm Ste elbows 90 (3D) GSD 56-95, ø 100 mm (2 pieces) Set elbows 45 (3D) GSD 56-95, ø 100 mm (2 pieces) Reducer kit GSD (2 x ø ø 130 / 2x ø ø 100) Set 2 pipes ø 130 mm, length 1000 mm Set elbows 90 (3D), ø 130 mm (2 pieces) Set elbows 45 (3D), ø 130 mm (2 pieces) 75 ACCESSORIES Note: the gross prices of the GSD have been reduced. Find out about the new discount! Code nr. Description Price Vertical louvre GSD Vertical louvre GSD Vertical louvre GSD Vertical louvre GSD Vertical louvre GSD Vertical louvre GSD Vertical louvre GSD Diffuser with horizontal louvre GSD Diffuser with horizontal louvre GSD Diffuser with horizontal louvre GSD Diffuser with horizontal louvre GSD Diffuser with horizontal louvre GSD Diffuser with horizontal louvre GSD Diffuser with horizontal louvre GSD Air heaters - 28

29 Diffuser with vertical louvre GSD Diffuser with vertical louvre GSD Diffuser with vertical louvre GSD Diffuser with vertical louvre GSD Diffuser with vertical louvre GSD Diffuser with vertical louvre GSD Diffuser with vertical louvre GSD Downflowhood 45 GSD Downflowhood 45 GSD Downflowhood 45 GSD Downflowhood 45 GSD Downflowhood 45 GSD Downflowhood 45 GSD Downflowhood 45 GSD ACCESSORIES - CONTROL Code nr. Description Price Basetherm Optitherm Interface module External temperature sensor Isolator switch, separate delivery, 230V (2 poles) Isolator switch, pre-wired, 230V (2 poles) 130 for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Set wall mounting brackets(2 pieces), GSD Set shock absorbers for wall mounting brackets, GSD ACCESSORIES - COLOURS *** ACCESSORIES Description Price GSD provided with colour 254 Accessories provided with colour 1 tot 3 pieces (by piece) 122 Accessories provided with colour 4 tot 10 pieces (by piece) 107 Accessories provided with colour for more than 10 pieces (by piece) 73 Code nr. Description Price Gas pressure regulator for gas pressures up to 100 mbar, separate delivery 130 REmark CE approval only in combination with the Mark single pipe vertical or horizontal *** These prices are only for the Mark standard RAL-colours: 3002 red, 1028 yellow, 6010 green, 7016 gray, 8014 brown, 9001 beige white, 5009 blue, 2009 orange, 1019 beige 29

30 SHOPHEATER The compact gas-fired air heater In addition to the standard GSD, Mark also offers a compact gas-fired suspended air heater, the Mark SHOPHEATER AR. With its low height, this air heater is excellently suited to heat low-ceiling rooms. The SHOPHEATER is equipped with an axial fan and a tube heat exchanger as standard. Features Compact construction Low weight Aluminium pipes exchanger Simple assembly and operation Painted in colour white RAL Low noise The shopheater AR is also available as a vertical outlet unit. The air heater is designed for use in showrooms, shops, multi-tenant business buildings and warehouses among other applications.

31 Dimensions TYPE AR 1.1 H G H P N øq E E F F 4 x M /2 Gas Gasanschluss supply 1/2 TYPE AR 2.1 H t/m 5.1 H K J 4 x M8 G H P N øq øq L M R Acces door S Gas 1/2 supply 1/ D A B Typ AR 1.1 H AR 2.1 H AR 3.1 H AR 4.1 H AR 5.1 H A B C D E F G H J K L M N P ØQ x80 2x80 2x80 2x100 R S The dimensions for the vertical outlet unit are the same as those for the horizontal outlet unit. 31

32 Technical information Type AR 1.1 H AR 2.1 H AR 3.1 H AR 4.1 H AR 5.1 H Nominal load (lower value) kw 14, Nominal power kw 13,1 18,4 24,8 31,3 35,9 Gas consumption G20 kg/h 1,5 2,12 2,86 3,6 4,13 Gas consumption G25 kg/h 1,76 2,35 3,18 4 4,59 Gas consumption G31 kg/h 1,11 1,56 2,11 2,66 4,23 Efficiency % >91 >91 >91 >91 >91 Air displacement (15 C) m3/h Air displacement (50 C) m3/h Throw m Supply voltage (50Hz) V 1~230 V 1~230 V 1~230 V 1~230 V 1~230 V Electrical power W Weight kg Noise level at 5m db(a) Accessories flue gas exhaust Extension set 2 90 elbow 3 45 elbow 4 Single flue set horizontal 5 Single flue set vertical 6 Lead flashing for slanting roof 7 Adhesive plate 8 Flexible lead flashing for sheetpile wall 9 Concentric boot piece for single pipe system C32 C12 9 Accessories additional sections Air heaters - 32

33 Controls ER Isolator switch Room thermostat Clock thermostat or Isolator switch Isolator switch Isolator switch Room thermostat Clock thermostat or 33

34 Price Mark SHOPHEAter PRODUCT - MARK SHOPHEATER - HORIZONTAL - NATURAL GAS G20 Code nr. Description Price AR 1.1 H_nominal power, 13,1 kw 2034 AR 2.1 H_nominal power, 18,4 kw 2252 AR 3.1 H_nominal power, 24,8 kw 2465 AR 4.1 H_nominal power, 31,3 kw 2778 AR 5.1 H_nominal power, 35,9 kw 2850 PRODUCT - MARK SHOPHEATER - VERTICAL - NATURAL GAS G20 Code nr. Description Price AR 1.1 V_nominal power, 13,1 kw 2269 AR 2.1 V_nominal power, 18,4 kw 2492 AR 3.1 V_nominal power, 24,8 kw 2705 AR 4.1 V_nominal power, 31,3 kw 3017 AR 5.1 V_nominal power, 35,9 kw 3090 ACCESSORIES - EXHAUST OUTLET Code nr. Description Price Single flue set vertical AR 1,1 H - 4,1 H, ø 80 mm. External diameter 130 mm Single pipe horizontal AR 1,1 H - 4,1 H, ø 80 mm. External diameter 130 mm Roof flashing AR 1,1 H - 4,1 H only in combination with Lead flashing 20 tot 35 AR 1,1 H - 4,1 H, only in combination with Dektite 4-7 AR 1,1 H - 4,1 H Set 2 pipes ø 80 mm for AR 1,1 H - 4,1 H, length 1000 mm Set elbows 90 (3D) AR 1,1 H - 4,1 H, ø 80 mm (2 pieces) Set elbows 45 (3D) AR 1,1 H - 4,1 H, ø 80 mm (2 pieces) Reducer kit AR 1,1 H - 5,1 H (2 x ø 80 - ø 100 / 2x ø ø 80) Concentric boot piece for single pipe system ø 80 / 125 _ 2x ø Single flue set vertical AR 5,1, ø 100 mm. External diameter 160 mm Single pipe horizontal AR 5,1, ø 100 mm. External diameter 160 mm Roof flashing AR 5,1 only in combination with Lead flashing 20 tot 35 AR 5,1, only in combination Set 2 pipes ø 100 mm for AR 5,1, length 1000 mm Ste elbows 90 (3D) AR 5,1, ø 100 mm (2 pieces) Set elbows 45 (3D) AR 5,1, ø 100 mm (2 pieces) 39 ACCESSORIES - CONTROL Code nr. Description Price Room thermostat on/off -, I/II- and reset, 230V (4A) Programmable room thermostat, 230V (4A) Isolator switch, separate delivery, 230V (4 poles) Isolator switch, pre-wired, 230V (4 poles) 193 for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Set wall mounting brackets, AR Set wall mounting brackets, AR 2.1 t/m AR ACCESSORIES Code nr. Description Price Conversion kit for propane AR Conversion kit for propane AR Conversion kit for propane AR Conversion kit for propane AR Conversion kit for propane AR Conversion kit for natural gas AR Conversion kit for natural gas AR Conversion kit for natural gas AR Conversion kit for natural gas AR Conversion kit for natural gas AR REmark Air heaters - 34 * Use only by room thermostat without reset

35 GC Reliable and highly versatile Over the past 65 years, this gas-fired air heater with centrifugal fan has proven itself to be a highly reliable and versatile heating appliance. The enormous variety of additional sections provides the option of configuring this appliance relatively easily for any required indoor climate. The Mark GC has various burner controls: on/off, high/low or pulsating. Use of the centrifugal fan renders the air heater ideally suited for connection to a duct system, spanning an external pressure of 300 Pa. The system fan can be set to high/low on a project basis for applications where the noise level is important. It is also possible to take in or recirculate (fresh) outside air. The GC can also be incorporated into a rooftop or air conditioning unit. The GC is designed to heat garages, warehouses, workshops, schools, sports halls and churches, among other applications, with or without a duct system. Features of the Mark GC Stainless steel AISI 409 heat exchanger Stainless steel AISI 321 burners Efficiency 90% low NOx electronic ignition Aluzinc coating Closed appliance Centrifugal fan reliable long lifespan Accessories Isolator switch wide selection of additional sections Air filters from G2 to F7 for higher external pressures, centrifugal fans with backward curved blades are available burner control: on/off, high/low or pulsating suitable for a building management system (GBS with a 0-10 Volt signal) Mark provides the following for this product as standard: 1 year service warranty, 2 years full product warranty and 10 years reducing warranty on the stainless steel heat exchanger. 35

36 Dimensions g h j k l ø f e M10 [4x] m x a 196 a b c n Type a b c e f g h j k l m n , , Air heaters - 36

37 Technical information Type Nominal power kw 20,4 21,8 25, ,2 32,7 40,2 43,6 50,2 54,5 60,3 65,3 80,4 87,1 95,8 Nominal load (lower value) kw 22,7 24,2 27,9 30,2 33,5 36,3 44,7 48,4 55,8 60,5 67,0 72,6 89,3 96,8 106,5 Air displacement (15 C) m3/h Gas consumption G25 (15 C) m3/h 2,7 3,0 3,3 3,6 4,0 4,4 5,4 5,9 6,6 7,1 8,0 8,7 10,6 11,6 12,8 Gas consumption G20 (15 C) m3/h 2,4 2,6 2,9 3,1 3,5 3,8 4,7 5,1 5,8 6,3 7,0 7,6 9,3 10,1 11,1 Gas consumption G31 (15 C) kg/h Gas consumption G30 (15 C) kg/h Delta T ( T) K Supply voltage (50Hz) V / / Weight kg Delta T max. 45K External pressure Pa, more on request G25 = Natural gas / G20 = Natural gas / G31 = Propane / G30 = Butane Accessories flue gas exhaust 1 1 Extension set 2 90 elbow 3 45 elbow 4 Single flue set horizontal 5 Single flue set vertical Lead flashing for pitched roof 7 Adhesive plate 8 Flexible lead flashing for cledded wall CE approved with single flue set vertical (C32) and single flue set horizontal (C12) 37

38 Accessories additional sections r 30 w 576 s 250 v u t x z 11/ 11G 12E 12 11/ 11G / 29G p 31 9V 5 4H / 29G 10/ 10G 29/ 29G E 12 12E 730 x z 8 7A q = 255/ / 11G x z Type p r s t u v w z Position H A 8 9V 10 10G 11 11G 12/12E G Description Horizontal louvres Vertical louvres Flexible connection outlet side Diffuser with horizontal louvres Set of vertical louvres for diffuser 4H Downflow hood 90º with outlet louvres Downflow hood 90º for duct connection Downflow hood 90º for duct connection with flexible connection Flexible connection 7/7A Empty section outlet side Fan casing Fan casing, insulated Damper Damper, insulated Filter section Flexible connection, inlet side Corner profile Mesh Weather grill Support frame Downflow hood 45 Cover plate Cover plate, insulated Aluminium rain cap incl. adhesive plate Empty section outlet side Air heaters - 38

39 Assembly/location suggestions Mounting brackets for wall mounting Shock absorbers set for mounting brackets GSE/GCE Controls Isolator switch Room sensor (optional) or or Room thermostat Pintherm Remote control panel w9 Pulsing / modulating PT100 sensor W9-1 B W9-1 BR W9-1 BRL

40 ROOFTOP Move the boiler room outside the building The Mark ROOFTOP provides the option of moving the boiler room outside the building for optimal use of the floor area released as a result. The ROOFTOP is manufactured as standard with a seawaterresistant outer coating. The ROOFTOP can be fitted with a single or several gas-fired air heaters for a capacity range from 20 to 384 kw coupled with large air volumes. Options with this versalite product include air filtering, recirculation and/or fresh outside air, duct connection or use of an outlet plenum. The ROOFTOP is particularly suitable for roof mounting in, for example: distribution centres, workshops, sports halls and offices. Features of the Mark ROOFTOP seawater-resistant aluminium housing ALMg3 Low weight Wide application Galvanized lower frame.

41 x x 1 y 300 xy 2 x 1 Options y 40 z p z 40 x 3 40 z p x 3 z 40 y z p z 40 y x 3 40 z p x 3 z 40 y 40 z p x 3 z Dimensions MONO RT TWIN RT Type p x1 x2 x3 y z 18/ ,5 24/ ,5 33/ / / / /98/

42 Technical information MONO Type Nominal power Nominal load (lower value) Air displacement (15 C) Gas consumption G25 (15 C) Gas consumption G20 (15 C) Gas consumption G31 (15 C) Gas consumption G30 (15 C) Delta T ( T) Supply voltage (50Hz) * 104 kw 20,4 21,8 25, ,2 32,7 40,2 43,6 50,2 54,5 60,3 65,3 80,4 87,1 91,8 95,8 kw 22,7 24,2 27,9 30,2 33,5 36,3 44,7 48,4 55,8 60,5 67,0 72,6 89,3 96,8 102,0 106,5 m 3 /h m 3 /h 2,7 3,0 3,3 3,6 4,0 4,4 5,4 5,9 6,6 7,1 8,0 8,7 10,6 11,6 12,5 12,8 m 3 /h 2,4 2,6 2,9 3,1 3,5 3,8 4,7 5,1 5,8 6,3 7,0 7,6 9,3 10,1 10,5 11,1 kg/h kg/h K V 1~230 1~230 1~230 1~230 1~230 1~230 1~230 1~230 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N * = Low NOx Delta T max. 45K External pressure Pa, more on request G25 = Natural gas / G20 = Natural gas / G31 = Propane / G30 = Butane TWIN Type Nominal power Nominal load (lower value) Air displacement (15 C) Gas consumption G25 (15 C) Gas consumption G20 (15 C) Gas consumption G31 (15 C) Gas consumption G30 (15 C) Delta T ( T) Supply voltage (50Hz) * 104 kw 120,6 130,6 160,8 174,2 183,6 191,6 kw 134,0 145,2 178,6 193,6 204,0 213,0 m 3 /h m 3 /h 16,0 17,4 21,2 23,2 25,0 25,6 m 3 /h 14,0 15,2 18,6 20,2 21,0 22,2 kg/h 10, , kg/h 10, , K V 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N * = Low NOx Delta T max. 45K External pressure Pa, more on request G25 = Natural gas / G20 = Natural gas / G31 = Propane / G30 = Butane Air heaters - 42

43 Assembly/location suggestions Example of roof pass-through Controls FTOP Isolator switch MPVC controller Room sensor (optional) (1 or 4) BMS or BMS or or Pintherm Remote control panel (by project) 43

44 FÖHN The longest-running product One of the first activities of Mark was to build an oil- or gas-fired vertical air heater, the FÖHN. As a result, Mark has already heated 1,500 churches in the Netherlands alone and may therefore be called the specialist in this field. As well as churches, countless other rooms are heated by the Mark FÖHN. If required, Mark supplies this appliance in loose parts for assembly on site by our own service department. The wide range of capacities from 50 to 415 kw means that this appliance can provide a solution for every heating requirement in any room. The Mark FÖHN is fitted with a centrifugal fan as standard and can therefore be connected to a duct system. Free discharge into a room is just one of the possibilities. Mark provides a 2-year full product warranty as standard for this product, and up to 10 years reducing warranty with the heat exchanger! Mark FÖHN features Combustion chamber and self-finished steel exchangers (stainless steel upon request) supplied with electrical terminal box as standard Aluzinc casing Various burner types possible, Riello or Weishaupt Various suction options Wide selection of filters fresh air suction possible Modulating burner (option) Flue fan (option)

45 F C F F D F C 1 D 1 F A C C 1 B 1 S H G F S N 1 J J Dimensions Vertical Horizontal H A G F D D 1 F P 1 B E* M 1 L E* L Type A B B1 C D E* F G H J L S * 119, * 119, * 119, * 119, * * * Mark gas burner Technical information Type Nominal load (lower value) Nominal power Air displacement with delta T 35K Air displacement with delta T 40K Air displacement with delta T 45K Air displacement with delta T 50K Gas consumption G25 Gas consumption G20 Gas connection Weight Supply voltage (50Hz) Oil consumption kw 57,0 85,4 130,9 182,2 239,2 307,6 381,6 455,4 kw 51,5 77,0 119,0 166,0 218,0 280,0 347,0 415,0 m 3 /h m 3 /h m 3 /h m 3 /h m 3 /h 6,68 10,01 15,35 21,36 28,04 36,06 44,74 53,40 m 3 /h 5,9 8,8 13,5 18,7 24,6 31,6 39,3 46, /4 11/4 11/2 11/2 2 2 kg V 1~230 1~230/ 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N kg/h 4,77 7,15 10,96 15,25 20,02 25,75 31,95 38,10 45

46 Accessories additional sections E D ** P 1 E B N 1 Horizontal A * C 1 Vertical A * N 1 F F D 1 M 1 C Type Position A Position B/C Position D Position E/F Total height including hood M 1 x N 1 P 1 x N 1 C 1 x D 1 50 * 800 x x x 800 H * 800 x x x 800 H * 815 x x x 695 H * 1015 x x x 895 H * 1315 x x x 1195 H * 1615 x x x 1495 H * 1900 x x x 1774 H * 1900 x x x 1774 H * No additional parts possible on side A. ** For Föhn 210, 270, 335 and 400 blast side D always in combination with blast side B or C. Assembly/location suggestions Air heaters - 46

47 Controls Isolator switch. Motor control box. FÖHN on/off FÖHN on/off Room sensor (optional) FÖHN on/off or high/low or or or BMS Room thermostat Pintherm Remote control panel F.. Remote control F1 FÖHN on/off Remote control F2 FÖHN on/off Remote control F4 FÖHN high/low Remote control F6 FÖHN high/low Remote control F7 FÖHN high/low 47

48 Prices Mark FÖHN PRODUCT - AIR HEATER FÖHN GAS-FIRED WITH MARK BURNER - NATURAL GAS G20 Code nr. Description Price FÖHN 75, nominal power, 77,0 kw 8844 FÖHN 115, nominal power, 119,0 kw FÖHN 160, nominal power, 166,0 kw FÖHN 210, nominal power, 218,0 kw FÖHN 270, nominal power, 280,0 kw FÖHN 335, nominal power, 347,0 kw FÖHN 400, nominal power, 415,0 kw PRODUCT - AIR HEATER FÖHN OIL-FIRED WITH RIELLO BURNER - HBO 10F2 Code nr. Description Price FÖHN 75, nominal power, 77,0 kw 7283 FÖHN 115, nominal power, 119,0 kw 8609 FÖHN 160, nominal power, 166,0 kw 9395 FÖHN 210, nominal power, 218,0 kw FÖHN 270, nominal power, 280,0 kw FÖHN 335, nominal power, 347,0 kw FÖHN 400, nominal power, 415,0 kw ACCESSORIES Code nr. Description Price Hood with horizontal louvre for FÖHN Hood with horizontal louvre for FÖHN Hood with horizontal louvre for FÖHN Hood with horizontal louvre for FÖHN Hood with horizontal louvre for FÖHN Hood with horizontal louvre for FÖHN Hood with horizontal louvre for FÖHN for a good selection of specific projects please contact our sales department ACCESSORIES - CONTROL Code nr. Description Price Room thermostat (6A) Pintherm - programmable room thermostat, 230V (4A) External temperature sensor, only in combination with Remote control panel F Remote control panel F Remote control panel F Remote control panel F Remote control panel F for functions explanations see chapter on control For a good selection of specific projects please contact our sales department ACCESSORIES - OTHER Code nr. Description Price Flowcontrol (oil burner) Draught stabilator 6 Föhn Draught stabilator 9 Föhn Draught stabilator 12 Föhn 335/ Draught stabilator Föhn 50/ Draught stabilator Föhn 115/ Draught stabilator Föhn 210/ Draught stabilator Föhn 335/ REMARKS From the FÖHN type 270 the burner will always start in stand low. If the heater is ordered without an hood, the static pressure will be 100 Pa. Air heaters - 48

49 G-TyPE A wide variety of uses The G-TYPE is a vertical or horizontal oil or gas-fired air heater with a capacity of 30kW to 1050kW. The appliance can both flow down freely into the room and can be connected to a conduit system. The Mark G-TYPE can be installed in stoke-rooms. Almost all brands and types of burner can be used in the Mark G-TYPE. The G-TYPE is therefore versatile. Fan A dual blast centrifugal ventilator with bent blades. Vee-belt drive. Housing Pre-painted steel plating. Frame: aluminium profiles. Standard equipment AISI 430 blast chamber AISI 409 heat exchanger Electrical switch box Three-way thermostat Motor cut-out. Accessories/options Various burners Room thermostat Remote control Gas density control Flue gas fan Working hours counter Stainless steel heat exchanger Outside installation Sections enclosed Connection Grid Empty section Filter section with differential pressure switch Servo or manually-operated slatted valves Weather grill Flexible connection Adjustable down flow hood Adjustments: On/off High/low Modulating The Mark G-TYPE can be used in the following rooms: sports halls, churches, offices and shops. 49

50 J Dimensions F G Type G 25 G 35 G 50 G 65 G 80 G100 G125 G150 G175 C2 Ø Dimensions A B C E +/ C Flue position E +/ C1 H ø B 40 I 40 A 40 Air out F G Air intake H Type G600 G750 G900 C I Burner J C Type G200 G250 G300 G375 G425 G500 G600 G750 G900 Dimensions A B C Flue position E +/ ø Air out F G Air intake H I Burner J Technical information Type G 25 G 35 G 50 G 65 G 80 G100 G125 G150 G175 Nominal load (lower value) kw 32,6 45,0 65,1 83,7 104,7 128,6 164,5 192,1 223,1 Nominal power kw 29,7 40,7 59,3 75,6 95,3 116,3 148,9 173,3 203,5 Air displacement with T 45K m 3 /h 18 C Electrical connection (50Hz) V 1~230 1~230 1~230 1~230 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N Gas consumption G20 m 3 /h 3,5 4,8 6,9 8,9 11,1 13,6 17,4 20,3 23,6 Gas consumption G25 m 3 /h 4,0 5,5 8,0 10,3 12,8 15,8 20,2 23,6 27,4 Gas consumption G31 kg/h 2,5 3,4 5,0 6,4 7,9 9,8 12,5 14,6 17,0 Gas consumption G30 kg/h 2,5 3,5 5,1 6,5 8,1 10,0 12,7 14,9 17,3 Oil consumption kg/h 2,7 3,8 5,5 7,1 8,8 10,8 13,9 16,2 18,8 Noise level (4 m) db(a) Weight kg Type G200 G250 G300 G375 G425 G500 G600 G750 G900 Nominal load (lower value) kw 257,8 318,7 387,2 482,3 541,9 632,3 763,4 957,3 1136,0 Nominal power kw 232,6 290,7 348,8 436,0 494,2 569,8 697,7 872,1 1047,0 Air displacement with T 45K m 3 /h 18 C Electrical connection (50Hz) V 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N Gas consumption G20 m 3 /h 27,3 33,8 41,0 51,1 57,4 67,0 80,8 101,4 120,3 Gas consumption G25 m 3 /h 31,7 39,2 47,6 59,3 66,7 77,8 94,0 117,8 140,0 Gas consumption G31 kg/h 19,6 24,3 29,5 36,7 41,3 48,2 58,1 72,9 86,5 Gas consumption G30 kg/h 20,0 24,7 30,0 37,3 41,9 49,0 59,1 74,1 88,0 Oil consumption kg/h 21,7 26,9 32,6 40,7 45,7 53,3 64,4 80,7 95,8 Noise level (4 m) db(a) Weight kg Air Luchtbehandeling heaters

51 Assembly/location suggestions Controls. or or or Roomthermostat Frost thermostat Pintherm week clock

52 Prices Mark G-TYPE PRODUCT - VERTICAL CABINET HEATER G-TYPE, WITHOUT BURNER EXCL. HOOD - NATURAL GAS G20 Code nr. Description Price G 25 Vertical cabinet heater G-TYPE, 30 kw G 35 Vertical cabinet heater G-TYPE, 41 kw G 50 Vertical cabinet heater G-TYPE, 60 kw G 65 Vertical cabinet heater G-TYPE, 76 kw G 80 Vertical cabinet heater G-TYPE, 96 kw G 100 Vertical cabinet heater G-TYPE, 117 kw G 125 Vertical cabinet heater G-TYPE, 150 kw G 150 Vertical cabinet heater G-TYPE, 175 kw G 175 Vertical cabinet heater G-TYPE, 205 kw G 200 Vertical cabinet heater G-TYPE, 235 kw G 250 Vertical cabinet heater G-TYPE, 295 kw G 300 Vertical cabinet heater G-TYPE, 350 kw G 375 Vertical cabinet heater G-TYPE, 440 kw G 425 Vertical cabinet heater G-TYPE, 495 kw G 500 Vertical cabinet heater G-TYPE, 570 kw G 600 Vertical cabinet heater G-TYPE, 700 kw* G 750 Vertical cabinet heater G-TYPE, 875 kw* G 900 Vertical cabinet heater G-TYPE, 1050 kw* PRODUCT - HORIZONTAL CABINET HEATER G-TYPE, WITHOUT BURNER Code nr. Description Price G 25 Horizontal cabinet heater G-TYPE, 30 kw G 35 Horizontal cabinet heater G-TYPE, 41 kw G 50 Horizontal cabinet heater G-TYPE, 60 kw G 65 Horizontal cabinet heater G-TYPE, 76 kw G 80 Horizontal cabinet heater G-TYPE, 96 kw G 100 Horizontal cabinet heater G-TYPE, 117 kw G 125 Horizontal cabinet heater G-TYPE, 150 kw G 150 Horizontal cabinet heater G-TYPE, 175 kw G 175 Horizontal cabinet heater G-TYPE, 205 kw G 200 Horizontal cabinet heater G-TYPE, 235 kw G 250 Horizontal cabinet heater G-TYPE, 295 kw G 300 Horizontal cabinet heater G-TYPE, 350 kw G 375 Horizontal cabinet heater G-TYPE, 440 kw G 425 Horizontal cabinet heater G-TYPE, 495 kw G 500 Horizontal cabinet heater G-TYPE, 570 kw G 600 Horizontal cabinet heater G-TYPE, 700 kw* G 750 Horizontal cabinet heater G-TYPE, 875 kw* G 900 Horizontal cabinet heater G-TYPE, 1050 kw* ACCESSORIES - PLENUM Code nr. Description Price Hood 2X D=245 G 25 / G Hood 2X D=245 G 50 / G Hood 3X D=245 G 80 / G Hood 2X D=450 G 125 / G Hood 3X D=400 G 175 / G Hood 4X D=400 G 250 / G Plenum + Louvres G Plenum + Louvres G 425 / G Plenum + Louvres G Plenum + Louvres G Plenum + Louvres G For a good selection of specific projects please contact our sales department ACCESSORIES - CONTROL Code nr. Description Price Room thermostat (6A) Pintherm 348 For function explanation see chapter on control REmark * Delivered in 2 pieces Air heaters - 52

53 CALFLO Maximum performance with large air quantities The Mark CALFLO is a make up air heating system. This means that the burner (and the flame) is located directly in the air flow to deliver maximum performance. The flue gases are so clean that they may be blown into the building. The CALFLO is suitable for rooms requiring large degrees of ventilation. This apliance is equipped with a modulating stainless steel burner and a seawater-resistant aluminium housing. Possible applications include sand blasting areas, welding areas, and the processing industry. Features Stainless steel line or box burners AlMg3 seawater-resistant aluminium housing (single-skin or double-skin) Low weight Available for both inside and outside installation Large air displacement wide turndown ratio through use of modulating burner Long lifespan Extensive configuration options Reliable HT filters (option) 53

54 H A 180 A C I Dimensions M B D 955 I R x S E F 390 Q 60 I T x U : Indoor version 5&6: external installation Service platform 2 J V x W E N G FF QQ 60 4 P 100 L K Y 50 M R x S 5 Lifting hooks E O G FF K 6 J V x W 30 54

55 Type A B C D E F FF G H I J K L M N O P Q QQ RxS 55CK x820 55CK x CK x CK x820 TxU VxW Y 1025x x x x x x x x CK x x x CK x x x CK x x x CK x x x CK x x x CK x x x CK x x x CK x x x CK CK CK CK x x x x x x x x x x x x CK CK CK CK x x x x x x x x x x x x CK CK CK CK x x x x x x x x x x x x Technical information Type Nominal load (upper value) Nominal load (lower value) Minimum load (lower value) Burner turndown ratio Gas consumption G25 (15 C) Gas consumption G20 (15 C) Gas consumption G31 (15 C) Gas consumption G30 (15 C) Air displacement T35K (15 C) Fan type T35K Air displacement T55K (15 C) Fan type T55K Weight* kw kw kw 3,2 6,4 9,6 12,8 16,0 19,2 22,4 25,6 28,8 32,0 38,4 44,8 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 20:1 m 3 /h 7,9 15,8 23,6 31,5 39,4 47,3 55,1 63,0 70,9 78,8 94,5 110,3 m 3 /h 6,8 13,5 20,3 27,1 33,9 40,6 47,4 54,2 60,9 67,7 81,3 94,8 kg/h 5,0 9,9 14,9 19,9 24,8 29,8 34,8 39,7 44,7 49,7 59,6 69,5 kg/h 5,1 10,1 15,2 20,2 25,3 30,3 35,4 40,4 45,5 50,5 60,6 70,7 m 3 /h m 3 /h kg * Weight of the Calflo unit for external installation, without filter section 55

56 . Assembly/location suggestions Controls Isolator switch Motor control box CALFLO on/off or high/low or BMS Remote control panel C.. Remote control C10 CALFLO on/off Remote control C12 CALFLO on/off with clock Remote control C20 CALFLO high/low Remote control C22 CALFLO high/low with clock Air heaters - 56

57 ECOFAN W42-W82-W142 Easy to use, with energy savings up to 30% on your gas consumption Mark recommends an ECOFAN with every air heater. A combination of these products provides optimum comfort and good heat distribution within the room. It is known that hot air rises which means that an air heater requires more time to heat up a room. A thermostatically-controlled ECOFAN transports the warm blanket under the roof to the occupied area. As a result, the room heats up more quickly, and gas consumption can in some cases be reduced by up to 30%. The ECOFAN can be used in construction halls, workshops, garages and logistics areas. Mark provides a full 2 year product warranty as standard. Features of the Mark ECOFAN Aluzinc housing Integrated thermostat 4-sided downflow hood Low maintenance The ECOFAN recirculating fan is available with various air displacements from to m³/h. The unit comes as standard with a reverse operating room thermostat that switches on the fan when the area under the ceiling becomes hot. 57

58 A Dimensions B Type W42 Type W82 Type W142 A B C D D C Technical information Assembly/location suggestions Type W42 W82 W142 Air displacement Motor rating m 3 /h W A Consumed current A Motor speed min l Protection class of motor Supply voltage (50Hz) lp V 1~230 1~230 1~230 Hmax Noise level db(a) Weight of ECOFAN kg A A-A Maximum mounting height m * m OFAN W / ECOFAN P140 Covered m 2 per fan * with cone Controls Isolator switch Isolator switch Isolator switch 5-step regulator Ventilation and reciculation equipment - 58

59 Prices Mark ECOFAN W42-W82-W142 PRODUCT - ECOFAN W-SERIE RECIRCULATION MODEL Code nr. Description Price ECOFAN W42, Complete with thermostat, air displacement m 3 /h ECOFAN W82, Complete with thermostat, air displacement m 3 /h ECOFAN W142, Complete with thermostat, air displacement m 3 /h ECOFAN W42, Complete with thermostat and isolator switch, air displacement m 3 /h ECOFAN W82, Complete with thermostat and isolator switch, air displacement m 3 /h ECOFAN W142, Complete with thermostat and isolator switch, air displacement m 3 /h 1189 ACCESSORIES Code nr. Description Price Destratification hood for type W ACCESSORIES - CONTROL Code nr. Description Price Control panel, 5-step, 230V - 6,0A * Control panel, 5-step, 230V - 12A * Control panel, 5-step, 230V - 14A * Isolator switch, 2-poles, 230V Junction box for ECOFAN, 12 x W42 of 8 x W for function explanations see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Suspension-set for W42, W82 en W pieces of chain at 550 mm and 8 x carbine hook (5x50mm) Carabine Hooks 5 ACCESSORIES - COLOURS ** Description Price ECOFAN W42 provided with colour Accessories ECOFAN W42 provided with colour 1 tot 3 pieces (by piece) 110 Accessories ECOFAN W42 provided with colour 4 tot 10 pieces (by piece) 94 Accessories ECOFAN W42 provided with colour for more than 10 pieces (by piece) 68 ECOFAN W82 provided with colour Accessories ECOFAN W82 provided with colour 1 tot 3 pieces (by piece) 120 Accessories ECOFAN W82 provided with colour 4 tot 10 pieces (by piece) 105 Accessories ECOFAN W82 provided with colour for more than 10 pieces (by piece) 74 ECOFAN W142 provided with colour Accessories ECOFAN W142 provided with colour 1 tot 3 pieces (by piece) 130 Accessories ECOFAN W142 provided with colour 4 tot 10 pieces (by piece) 115 Accessories ECOFAN W142 provided with colour for more than 10 pieces (by piece) 79 REmark * W42 1.2A, 230V, W A, 230V, W A, 230V ** These prices are only for the Mark standard RAL-colours: 3002 red, 1028 yellow, 6010 green, 7016 gray, 8014 brown, 9001 beige white, 5009 blue, 2009 orange, 1019 beige 59

60 ECOFAN P140 Silent and low maintenance air distributor The ECOFAN P140 is particularly suited to better distributing hot air in a room. Achieving better distribution of air can reduce heating bills. The appliance is supplied with a 5-position control as standard. A reverse operating thermostat can also be supplied as an option so that the unit is switched on automatically if the temperature below the ceiling rises. Possible applications include: factories, schools, churches, shops and offices. Features of the Mark ECOFAN P140 Large air displacement Supplied in RAL 9010 colour as standard. Low noise Efficient Dimensions

61 Technical information Number of fans Number of fans per 1000 m 2 : 12 Covered m 2 per fan: 83 Type Air displacement Motor rating Consumed current Motor speed Diam. of fan Supply voltage (50Hz) Height Weight Suspension height P 140 m 3 /h W 70 A 0.5 min l 290 mm 1360 V 1~230 mm 700 kg 8 m 4-9 Controls Isolator switch Isolator switch Isolator switch 5-step regulator Price ECOFAN P140 PRODUCT - ECOFAN CEILING FAN Code nr. Description Price ECOFAN P140, Included 5-step regulator, Air amount m 3 /h 208 ACCESSORIES - CONTROL Code nr. Description Price Room thermostat (6A) step regulator, 230V-6,0A* step regulator, 230V-12A* step regulator, 230V-14A* 526 Remarks for function explanations see chapter on controls * More than one ventilators connected on the regulator P140, 0.5A, 230V 61

62 MDV Roof fan for the right air balance The Mark MDV roof fan is designed to extract contaminated air from rooms such as working spaces or construction areas. MDV extraction fans can be combined particularly well with one of the supply units from the Mark range, such as the GC/ GC+/Rooftop. The MDV is available with various air displacements varying from 1,840 to 15,000 m³/h. The unit is supplied with a radial fan as standard. The outer casing is made of zinc plating. The MDV can be used in construction halls, workshops and welding areas. Mark provides a full 2 year product warranty as standard. Features of the Mark MDV Sendzimir plating Radial fan with backward curved blades Wide selection of air displacements Low maintenance Good price 62

63 Dimensions A B b H C E F ød z x m b D Type A B C D E F H b z x m ød MDV x M6 9.5 MDV x M MDV x M MDV x M MDV x M MDV x M MDV x M Technical information Type MDV 311 L1 MDV 355 L1 MDV 400 L1 MDV 450 L1 MDV 500 L3 MDV 560 L3 MDV 630 L3 Supply voltage (50Hz) V 1-230V* 1-230V* 1-230V* 1-230V* 3~400V 3~400V 3~400V Electrical power kw 0,17 0,31 0,52 0,74 1,25 1,8 4,1 Consumed current A Speed min Maximum air displacement m 3 /h Maximum air temperature C Fan protection class IP Weight kg 18 28, , Noise level (1m) db(a) * 400 V on request 63

64 Accessories additional sections F E H D M Type D E F G M H kg Roof spacer M D 355/ M / M G 560/ M F E H D M Roof spacer with silencer Type D E F G M H kg M D 355/ M / M G 560/ M Automatic butterfly valve z x ød D1 D2 H H D Type D D1 D2 z x ød H kg x / x / x / x The self-closing connection flange fitted with coupling flanges and is made of galvanised steel. The valve blades are made of aluminium. Type D D1 D2 z x ød H kg x ,5 Coupling flange z x ød 355/ x ,6 450/ x ,7 560/ x D1 D2 D Ventilation and reciculation equipment - 64

65 Assembly/location suggestions Controls Isolator switch Isolator switch Isolator switch Optional Optional 5-step regulator Clock BMS 65

66 Prices Mark MDV PRODUCT - MDV ROOF FAN Code nr. Description Price MDV A 311 L1, Roof fan, 230V MDV A 355 L1, Roof fan, 230V MDV A 400 L1, Roof fan, 230V MDV A 450 L1, Roof fan, 230V MDV A 311 L3, Roof fan, 400V * MDV A 355 L3, Roof fan, 400V * MDV A 450 L3, Roof fan, 400V * MDV A 500 L3, Roof fan, 400V MDV A 560 L3, Roof fan, 400V MDV A 630 L3, Roof fan, 400V 3006 ACCESSORIES Code nr. Description Price Back draught shutter for MDV 311, height 156 mm Back draught shutter for MDV 355 / 400 / 450 / 500, height 220 mm Back draught shutter for MDV 560 / 630, height 225 mm Roof curb MDV 311, isolated, height 300 mm * Roof curb MDV 355 / 400, isolated, height 300 mm * Roof curb MDV 450 / 500, isolated, height 300 mm * Roof curb MDV 560 / 630, isolated, height 300 mm * Roof curb with silencer for MDV 311, isolated, height 500 mm Roof curb with silencer for MDV 355 / 400, isolated, height 650 mm Roof curb with silencer for MDV 450 / 500, isolated, height 650 mm Roof curb with silencer for MDV 560 / 630, isolated, height 700 mm Supply connection MDV 311, height 25 mm * Supply connection MDV 355 / 400 / 450 / 500, height 30 mm * Supply connection MDV 560 / 630, height 30 mm * Noise reduction plate for MDV Noise reduction plate for MDV 355 / Noise reduction plate for MDV 450 / Noise reduction plate for MDV 560 / ACCESSORIES - CONTROL Code nr. Description Price Control box, 5-steps, 400V - 2,0A*** Control box, 5-steps, 400V - 4,0A*** Control box, 5-steps, 400V - 7,0A*** Control box, 5-steps, 230V - 6,0A*** Control box, 5-steps, 230V - 12,0A*** Control box, 5-steps, 230V - 14,0A*** Isolator switch 4 poles 230V, separate delivery Isolator switch 8 poles 400V, separate delivery Isolator switch 4 poles 230V, pre-wired Isolator switch 8 poles 400V, pre-wired 213 for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Mounting set MDV 311** Mounting set MDV 355 t/m 630** 11 REmark * Not supply from stock ** Must be ordered by roof flashing manufacturer *** 311 L1 0,9A, 230V, 355 L1 1,35A, 230V, 400 L1 2,2A, 230V 450 L1 3,2A, 230V, 500 L3 2,3A, 400V, 560 L3 3,4A, 400V 630 L3 6,8A, 400V Ventilation and reciculation equipment - 66

67 KLIMAT The ultimate in air handling units: directly and indirectly fired Mark has developed a range of air handling units with several options for a wide variety of applications. From a simple air intake unit to a fully automatically-controlled air handling unit suitable for both indoor or outdoor use. There is a wide selection of heating systems, such as hot water batteries, gas or oil-fired modules, gas-fired make-up air systems or high performance gas-fired heating systems. Heat recovery and cooling are of course also possible. The air handling units can be for internal and external use. Mark air handling units are made from seawater-resistant aluminium panels with double-walled insulation as standard. This means lower weight and a longer lifespan. The Mark air handling unit is a highly developed, premium quality product that can be adjusted to the customer s requirements. Features Air displacements up to 69,500 m 3 /h Very economical to buy and use Integration of high-efficiency heating modules is possible Modular construction Easy to maintain Long life Flexible and variable Proven design Low weight 67

68 Dimensions Type of air handling unit Air displacement max. Dimensions (Width x Height) AHU m3/h 975 x 975 AHU m3/h 975 x 1280 AHU m3/h 1280 x 1280 AHU m3/h 1530 x 1280 AHU m3/h 1890 x 1280 AHU m3/h 2195 x 1530 AHU m3/h 2195 x 2195 AHU m3/h 2508 x 2195 Construction the air handling unit is of modular construction. The frame construction consists of profiled closed aluminium tube profiles. The individual cabinet modules can be installed in different ways, either in line, next to each other or on top of each other. The tube profiles are attached to each other using plastic angled profides to create a stable frame construction. Modular construction The individual parts of the air handling unit are quick and easy to install due to a well thought out system. In almost every case, the modules are supplied pre-assembled. The individual modules are fixed to each other so that they are airtight. the double-walled aluminium panels are mounted in the frame in an airtight manner. the centering section in the corner of the module ensures correct installation to the next module. Technical detail The access doors are fitted with adjustable, maintenance-free hinges (adjustable both in height and at the sides). The hinges, or panel clips if required, are mounted on the outside of the air handling unit. This prevents dirt from building up on the inside of the unit. The access doors of the air handling unit are fitted with lockable spring locks. The airtight closure of the doors against the housing is guaranteed by a special rubber profile. Air conditioning - 68

69 Sound and thermal insulation Noise reduction is an important point for consideration in the design of an air handling unit. For this reason, we have opted to use a doublewalled seawater-resistant aluminium panel with 30 mm rock wool insulation. This also results in excellent thermal insulation. Sound insulation of a dividing panel (ISO 717-1:1996) A lot of attention is paid to the smooth finishing on the inside of the unit, which makes it easy to clean. See table for sound insulation values. Sound insulation R Frequency Optimal fan power the heart of the air handling unit is the fan. Mark selects the most suitable fan for the application requested. Depending on the application, a fan with forward or backward curved blades or a free-running fan can be used. the fan and the motor are placed on a frame. The frame is set up on shock absorbers in the housing. Delta P air flow monitoring is possible. 69

70 Filter section To guarantee the right air quality, Mark offers a wide selection of filters. All necessary care is taken in the sealing of the filter frames and filters. Filters should be changed from the inside on the dirty side. The filter options are: Panel filter Bag filter short Bag filter long High temperature filter Special filters are available on request. Delta P filter monitoring is possible. B Heating systems A Mark air handling units can be equipped with various heat generators. C E D A Hot water battery B Gas-fired condensing modulating high-efficiency air heater (> 106% efficiency) C Gas-fired air heater module. D Direct gas- or oil-fired air heater. E Direct gas-fired make-up air burner, only applicable if all intake air is expelled in a controlled manner. Benefits: Gas- and oil-fired air heaters No heat intermediary No heat loss during stoppages Large selection of heating capacities High-efficiency Good temperature control the air handling unit can be supplied as plug & play. Air conditioning - 70

71 Hot water batteries Hot water batteries are designed as standard in copper-aluminium. The heat exchanger connections can be fitted internally or externally. Optional: Hot-dip galvanised Anti-corrosion coating Steam, thermal oil Frost protection thermostat Gas-fired condensing pulsating air heater Efficiency >106% Closed design. Electronic ignition of the main burner. Control: modulating. Module suitable for installation in an air handling unit.. Type Nominal load (upper value) Efficiency at 100% load Efficiency at min. load Burner turndown ratio Air volume, min kw 34, % 95,7 94,8 94,2 94,3 94,2 94,8 % 107,3 107,3 107,4 106,3 106,3 107,0 +/- 4:1 5:1 5:1 4:1 4:1 4:1 m 3 /h Air volume, max.* m 3 /h * Larger air volumes using a bypass. Gas-fired air heater module Closed design. Electronic ignition of the main burners by a pilot flame. Control: on/off, high/low or pulsing. Module suitable for installation in an air handling unit. TWIN type Nominal power ) 104 kw 120,6 130,6 160,8 174,2 183,6 191,6 Nominal load (lower value) Air volume, min. Air volume, max.* kw 134,0 145,2 178,6 193,6 204,0 213,0 m 3 /h m 3 /h * Larger air volumes using a by-pass. 1) Low NO x MONO type Nominal power ) 104 kw 20,4 21,8 25,1 27,2 30,2 32,7 40,2 43,6 50,2 54,5 60,3 65,3 80,4 87,1 91,8 95,8 Nominal load (lower value) Air volume, min. Air volume, max.* kw 22,7 24,2 27,9 30,2 33,5 36,3 44,7 48,4 55,8 60,5 67,0 72,6 89,3 96,8 102,0 106,5 m 3 /h m 3 /h * Larger air volumes using a by-pass. 1) Low NO x 71

72 Direct gas- or oil-fired air heater Burner Gas or oil Combustion chamber Stainless steel AISI 321 Chrome steel (AISI 409) for the sizes 335/400 Heat exchanger Stainless steel AISI 304 Type Nominal load (lower value) Nominal power Air volume, min. Air volume, max.* kw 130,9 182,2 239,2 307,6 381,6 455,4 kw 119,0 166,0 218,0 280,0 347,0 415,0 m 3 /h m 3 /h * Larger air volumes using a by-pass. CO 5 ppm NO 1 ppm NO2 1 ppm Number of grams (H 2 O) of water vapour per kg dry air. H2O gr/kg ppm CO gr/kg 740 ppm gr/kg 1295 ppm 2,34 gr/kg gr/kg DE MAX 1850 ppm 2035 ppm K DT T as a function of the added CO 2 in ppm. Direct gas-fired make-up air burner Direct gas-fired air make-up air heaters are integrated into the air handling unit. This type of air heater is suitable only if the heated air is expelled in a controlled manner. Adjustment: modulating 20:1. 1 m 3 air 15 C = 1.20 kg. MONO type Nominal load (upper value) Nominal load (lower value) Minimum load (lower value) Air volume, min kw kw kw 3,2 6,4 9,6 12,8 16,0 19,2 22,4 25,6 28,8 32,0 37,4 44,8 m 3 /h Air volume, max. m 3 /h Air conditioning - 72

73 Heat recovery Operating costs can be reduced and the environment protected by the use of heat recovery. Heat can be recovered using the following systems: Cross-flow plate heat exchanger Twin-coil heat exchanger Benefits: Durable, no mechanical moving parts reliable simple installation Separate air flows Air flow via a by-pass is possible Very economical solution for heat recovery Efficiency > 50% Benefits: fresh air and return air can be separated spatially short installation length suitable for installation in existing units Can also be used at higher temperatures, large selection of heat exchangers, number of tube rows and materials used (Cu/Al or galvanized steel) Efficiency up to approx. 50% Heat wheel Benefits: low pressure drop Compact construction High heat-exchanging power option to re-use latent heat Option to re-use available humidity Efficiency between 60% and 90% can be selected 73

74 Mixing boxes The air handling unit can be equipped with a mixing box. This box is placed between the air extraction section and the air inlet section. The mixing box can be fitted with servomotorcontrolled dampers. Optional: Modulating - or open/closed control 24 V or 230 V. Cooling Direct cooling (air cooling), DX system Indirect cooling (water cooling), Chiller Adiabatic cooling, soft cool (optional) Indirect cooling Direct cooling Water is cooled in the cooling unit. Cold water is pumped into a cold water battery in the air handling unit. This will cool the air flow. The air flow is cooled directly, the humidifier is situated directly in the air flow that needs to be cooled. Benefits: the cooling unit is installed separately from the air handling unit. Low investment costs short installation length low operating costs Good cooling efficiency Excellent air dehumidification. Control sends the quantity of cold water through the air-cooled cold water battery. the cooling unit ensures the water temperature is constant. Highly adjustable Guaranteed cooling capacity. Benefits: Low investment costs Short installation length Low operating costs No water-related problems (risk of freezing, glycol concentrate, corrosion). Good cooling efficiency Excellent air dehumidification. Air conditioning - 74

75 airstream Plug and play heat-recovery unit Increasingly high demands are being placed on the air quality in buildings. Multiple ventilation is often needed in order to comply with these demands. A great deal of energy is lost when standard ventilation equipment is used. To counter the loss of energy, Mark has included a heat-recovery unit, the AIRSTREAM, in its product range. The unit is equipped with a cross-flow exchanger which has an efficiency of 90%. This means that 90% of the energy expelled is supplied to the fresh intake air. This high-efficiency means that in many cases no after-heating is required. The AIRSTREAM heat exchanger unit is available for both internal and external use. Possible applications for the AIRSTREAM include: offices, schools, workshops and changing areas. The end-user of this heat-recovery unit may be eligible for the EIA-scheme. Find out about the possibilities and conditions. Features: Efficiency > 90% Air amounts between m³/h A certified high-efficiency counterflow heat exchanger equipped with bypass 45 mm environmentally friendly foam sandwich panel The outer panelling consists of galvanized plate coated in RAL 9002 (white - grey) the internal panelling consists of extremely corrosion-resistant sendzimir zinc thermal-bridge-free cabinet construction with aluminum profiles seamless connection of the panels to the inside with rubber seal (hygienic) High external pressure possible Removable doors Indoor and outdoor installation Low noise level Plug & Play-version supplied pre-assembled Various construction types possible as standard as well as specials on request Plug Fans equipped with energy-saving EC-motors Certification according to Energieeffizienzklasse A+ mid-2014 Optional: Pre- and re-heating: electric, gas, water, change-over Cooling coil Heat wheel 75

76 Dimensions Indoor version Outdoor version T A1 A2 A3 A4 A5 A6 B C D E F A1 A2 A3 A4 A5 A6 Standard unit Unit with after-heater or cooler Unit with after-heater or cooler Standard unit with external air valve Unit with external air valve, after-heater or cooler Unit with external air valve, after-heater or cooler Technical information Airstream Maximum air volume Maximum external pressure Efficiency Maximum current consumption per unit Weight of unit for L = A1 Weight of unit for L = A2 Weight of unit for L = A3 Weight of unit for L = A4 Weight of unit for L = A5 Weight of unit for L = A6 Supply voltage (50Hz) m 3 /h Pa % A 5, ,4 3,4 5,2 9,2 9,2 13,2 13,2 14,2 26,4 kg kg kg kg kg kg V 1~230 1~230 1~230 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N 3~400+N Air conditioning - 76

77 Accessories additional sections The Airstream can be equipped with the following options: Integrated valves for external air, waste air, recirculated air. Integrated pre- and after-heater (electric or hot water), change-over system, integrated cooler (cold water or DX). Assembly/location suggestions Indoor version Outdoor version Mark Airstream Mark Airstream is constructed with 45 mm prefab insulated panels. The mechanical strengths of the casing have been tested according to NEN-EN Deflection: Class D1 - Air leakage: Class L1 - Thermal transmission: Class T2 - Thermal bridging: Class TB2 The fans in the air handling units are equipped with high-efficiency intelligent centrifugal fans with EC-technology, the advantages of which are: - The highest efficiency in case of speed control - Up to 50% energy saving in case of partial load - Almost completely linearly adjustable - Long lifetime - Low noise level - Integrated electronic thermal protection 77

78 Controls Isolator switch MOD BUS or HUBA Controls Pressure sensor Remote control Filter protection + Pressure log Lon module CO2-sensor Room sensor Mark Airstream control: - Control and display via a handheld computer or building management system - Equipped with web-based software - Control based on CO2, air quality, pressure, humidity, pressure loss and presence in the room is possible 78

79 Radiant heating With normal heating systems, the heated air rises upwards outside the usable range. When you use INFRA heating systems, the heat remains where it is needed. The easy way to heat halls Mark manufactures a variety of radiant heating systems. These systems operate with various heat media. Mark offers a range of gas-fired radiant heaters and water-supplied radiant panels. Principle of radiant heating By using a heat medium such as, for example, warm water or hot air (flue gases), pipework can be heated. The medium is able to heat the pipework to such a degree that the pipe emits its heat in the form of radiant heat. This heat can best be compared with the sun. The radiant heat is completely harmless, and provides a very pleasant atmosphere. If the radiant heat is used, the air in a room does not need to be heated. The room temperature (air) also remains relatively low. An example of this is that when the ambient temperature is just 18 degrees, it feels like 20 degrees. One major benefit is that the energy requirement is reduced by up to 10% and that the system is very fast. Reducing energy requirements and having a much shorter heating time means it is possible to reduce energy consumption by approximately 40% in comparison with conventional heating. The radiant heat ensures that the floor of the hall has a temperature higher than the desired hall temperature. Using radiant heating means that no pockets of heat form under the roof, unlike with conventional heating. No air is blown into the hall, so that people are not affected by air displacement or dust eddies. Think, for example, of the goods on warehouse shelves, which previously always became dusty, or sports halls where the air heaters had to be switched off during games of badminton. Radiant heating is particularly suitable for zone heating so that, for example, only a work space is heated rather than the whole room. This unit is also suitable for poorly insulated buildings. Application Our systems are particularly suitable for sports halls, production facilities, aircraft hangars, showrooms and garages. The benefits of radiant heating include short warm-up time High floor temperature silent No air movement low energy consumption Zone heating is possible Heat only where needed 79

80 infra / INFRA MONO The radiant tube that fires up! Mark INFRA / INFRA MONO black tube radiant heaters heat with long-wave infrared radiation. Radiant heating is based on the principle of heat transfer from a warm body to a body of lower temperature by means of electromagnetic wave energy. This electromagnetic wave, not hindered by air, radiates walls, floor and the present persons in the room. As soon as the infrared radiation gets in contact with the human body, it is converted into heat. This does not cause any change in the air temperature. This method of heat generation is considered as very pleasant. The more intense the radiant heat is, the less, the actual air temperature has to be increased for a comfortable indoor climate. Therefore, heating with the Mark INFRA system is much more economical compared to conventional systems. Possible applications include: sports halls, production facilities, aircraft hangars, showrooms and garages The benefits of radiant heating include No spreading of dust and low noise level during operation Can be used in a focused way to enable a high energy efficiency A radiation efficiency of up to 75% according to EN A uniform heat distribution across the entire length of the radiator is achieved by the use of an overpressure burner with a long stable flame, in combination with built-in turbulators in the radiant tube Available in 6 different capacities from 10 to 50 kw By using a 1-stage, 2-stage or modulating control the output of the radiant heater is adapted to the demanded heat Various sizes, from 3 to 18 m length Highly reflective aluminium reflector hood, optional double air insulated (type +) The radiator with a double air-insulated aluminium reflector can be optimized energetically by using a flue gas cooler (type + +) The highly reflective radiation hood features integrated V-shaped reflectors and end caps Available in natural gas and propane Easy installation and maintenance 80

81 Dimensions single-walled reflector ½ 334 INFRA Ø ½ Ø ½ Ø80 ½ Ø100 ½ Ø100 ½ Ø100 ½ INFRA INFRA 20-6 INFRA 30-6 INFRA 30-9 INFRA 40-9 INFRA Ø100 81

82 Dimensions double-walled reflector ½ 334 INFRA / ½ INFRA / Ø ½ INFRA / Ø ½ INFRA / Ø ½ INFRA / Ø80 ½ INFRA / Ø Ø ½ INFRA / Ø ½ ½ Gas-fired radiant heaters

83 Technical information Type Nominal power Nominal load (lower value) Gas consumption G25 (15 C) Gas consumption G20 (15 C) Gas consumption G31 (15 C) Gas consumption G30 (15 C) Weight of the Infra Electrical power Recommended suspension height, horizontal Recommended suspension height, 30 angle Burner pressure G25 Burner pressure G20 Burner pressure G31 Burner pressure G kw 9,1 12,7 16,3 24,6 27,5 34,4 45,1 kw 10,0 14,0 18,0 27,0 30,0 38,0 49,9 m 3 /h 1,20 1,70 2,20 3,20 3,60 4,60 5,90 m 3 /h 1,10 1,50 1,90 2,90 3,20 3,90 5,30 kg/h 0,79 1,11 1,42 2,12 2,36 2,99 3,92 kg/h 0,81 1,14 1,46 2,19 2,43 3,08 4,04 kg / 87* 89 / 109* 123 / 153* 123 / 153* 148 / 188* W m m mbar 16,0 16,0 16,0 16,0 16,0 16,0 16,0 mbar 11,0 11,5 11,0 11,5 11,5 11,5 12,0 mbar 35,6 35,6 35,6 35,6 35,6 35,6 35,6 mbar 27,7 27,7 27,7 27,7 27,7 27,7 27,7 * Single-/ Double-walled reflector Controls Isolator switch Isolator switch Isolator switch Black bulb sensor or or Room thermostat Pintherm Infra Remote control panel SCR 83

84 Dimensions Infra Mono ½ 352 INFRA MONO INFRA MONO Ø100 ½ Ø100 Technical information e inal power inal load (lower value) consumption G25 (15 C) consumption G20 (15 C) consumption G31 (15 C) consumption G30 (15 C) ight of the Infra trical power ommended suspension ht, horizontal ommended suspension ht, 30 angle ner pressure G25 ner pressure G20 ner pressure G31 ner pressure G Type Mono Mono kw 9,1 12,7 16,3 Nominal 24,6 power 27,5 34,4 kw 45,1 9,1 27,5 45,1 12,7 16,3 kw m 3 /h m 3 /h kg/h kg/h 10,0 1,20 1,10 0,79 0,81 14,0 1,70 1,50 1,11 1,14 18,0 2,20 1,90 1,42 1,46 Nominal 27,0 load (lower 30,0 value) Gas consumption 3,20 G25 3,60 (15 C) Gas consumption 2,90 G20 3,20 (15 C) Gas consumption 2,12 G31 2,36 (15 C) Gas consumption 2,19 G30 2,43 (15 C) 38,0 kw 4,60 m 3 /h 3,90 m 3 /h 2,99 kg/h 3,08 kg/h 49,9 5,90 5,30 3,92 4,04 10,0 30,0 1,20 3,60 1,10 3,20 0,79 2,36 0,81 2,43 49,9 5,90 5,10 3,92 4,04 14,0 1,70 1,50 1,11 1,14 18,0 2,20 1,90 1,42 1,46 kg / 87* Weight of 89 the / 109* Infra 123 / 153* 123 / kg 153* 148 / 188* / 87* W Electrical 80 power W m m Recommended 5 suspension 5 height, horizontal Recommended 4 suspension 4 height, 30 angle 5 5 m m mbar mbar 16,0 11,0 16,0 11,5 16,0 11,0 Burner pressure 16,0 G2516,0 Burner pressure 11,5 G2011,5 16,0 mbar 11,5 mbar 16,0 12,0 16,0 11,0 11,5 16,0 11,5 16,0 11,5 16,0 11,0 mbar 35,6 35,6 35,6 Burner pressure 35,6 G3135,6 35,6 mbar 35,6 35,6 35,6 35,6 35,6 mbar 27,7 27,7 27,7 Burner pressure 27,7 G3027,7 27,7 mbar 27,7 27,7 27,7 27,7 27,7 / (+/++) * (-) / (+/++) Gas-fired radiant heaters - 84

85 Controls Isolator switch Isolator switch Isolator switch Black bulb sensor or or Room thermostat Pintherm Infra Remote control panel SCR 85

86 Prices Mark INFRA / INFRA MONO product - INFRA, on/off burner, single-walled, natural gas G25/G20 Code nr. Description Price INFRA 10-3, nominal power 10,0 kw INFRA 15-5, nominal power 15,0 kw INFRA 20-6, nominal power 18,0 kw INFRA 30-6, nominal power 27,0 kw INFRA 30-9, nominal power 30,0 kw INFRA 40-9 nominal power 38,0 kw INFRA 50-12, nominal power 49,9 kw INFRA MONO 30-12, nominal power 30,0 kw INFRA MONO 50-18, nominal power 49,9 kw 2973 Other gas types available on request. product - INFRA, high/low burner, single-walled, natural gas G25/G20 Code nr. Description Price INFRA 10-3, nominal power 10,0 kw INFRA 15-5, nominal power 15,0 kw INFRA 20-6, nominal power 18,0 kw INFRA 30-6, nominal power 27,0 kw INFRA 30-9, nominal power 30,0 kw INFRA 40-9 nominal power 38,0 kw INFRA 50-12, nominal power 49,9 kw INFRA MONO 30-12, nominal power 30,0 kw INFRA MONO 50-18, nominal power 49,9 kw 2973 Other gas types available on request. product - INFRA, on/off burner, double-walled, natural gas G25/G20 Code nr. Description Price INFRA 10-3, nominal power 10,0 kw INFRA 15-5, nominal power 15,0 kw INFRA 20-6, nominal power 18,0 kw INFRA 30-6, nominal power 27,0 kw INFRA 30-9, nominal power 30,0 kw INFRA 40-9 nominal power 38,0 kw INFRA 50-12, nominal power 49,9 kw 3925 Other gas types available on request. product - INFRA, high/low burner, double-walled, natural gas G25/G20 Code nr. Description Price INFRA 10-3, nominal power 10,0 kw INFRA 15-5, nominal power 15,0 kw INFRA 20-6, nominal power 18,0 kw INFRA 30-6, nominal power 27,0 kw INFRA 30-9, nominal power 30,0 kw INFRA 40-9 nominal power 38,0 kw INFRA 50-12, nominal power 49,9 kw 3997 Export packaging - INFRA Other gas types available on request. Code nr. Description Price INFRA 10/20 (=<12 pieces) INFRA 30/40/50 (=<12 pieces) INFRA 10-3 (64 pieces) INFRA 20-6 (32 pieces) INFRA 30-9/40-9 (15 pieces) INFRA (10 pieces) 660 Delivery contains: 1) a box with burner, mounting brackets, (VLV) fan and mounting materials. 2) radiation tubes and reflector cap (s) packed in selected bulk packaging. 3) a box with end caps and mounting brackets V-reflector. Gas-fired radiant heaters - 86

87 ACCESSOR1ES - flue fan Code nr. Description Price INFRA 10-3 / 15-5 / Single flue set vertical, ø 80mm. External diameter 130mm Single pipe horizontal, ø 80mm. External diameter 130mm Roof flashing, only in combination with Lead flashing 20 to 35, only in combination with Dektite Flue gas cooler D Flexible connection D=80 intake side Set pipes ø 80mm, length 1000 mm Set elbows 90 (3D), ø 80mm (2 pieces) Set elbows 45 (3D), ø 80mm (2 pieces) Reducer kit 2 x from ø 80 to ø 100 / 2x from ø 100 to ø Code nr. Description Price INFRA 30-9 / 30-6 / 40-9 / / MONO / MONO Single flue set vertical, ø 100mm. External diameter 160mm Single pipe horizontal, ø 100mm. External diameter 160mm*** Roof flashing, only in combination with Lead flashing 20 to 35, only in combination with Dektite Flue gas cooler D Flexible connection D=100 intake side Set pipes ø 100mm, length 1000 mm Set elbows 90 (3D), ø 100mm (2 pieces) Set elbows 45 (3D), ø 100mm (2 pieces) Reducer kit 2 x from ø 100 to ø 130 / 2x from ø 130 to ø Set pipes ø 130mm, length 1000 mm Set elbows 90 (3D), ø 130mm (2 pieces) Set elbows 45 (3D), ø 130mm (2 pieces) Box downdraught diverter ø 130mm 74 ACCESSORiES - controls Code nr. Description Price Room thermostat on/off -, I/II- and reset, 230V (4A) Bracket for room thermostat Pintherm infra - programmable room thermostat, 230V (4A) * External black bulb sensor for Isolator switch, separate delivery, 230V (2 poles) Isolator switch, separate delivery, 230V (4 poles)** 55 Control boxes on request For function explanation see chapter on control ACCESSORiES - assembly Code nr. Description Price Set wall mounting brackets INFRA 10-3 / 15-5 / 20-6 / Set wall mounting brackets INFRA 30-9 / 40-9 / Set wall mounting brackets INFRA MONO Set wall mounting brackets INFRA MONO ball guard on demand ACCESSORiES Code nr. Description Price Flexible hose 3/4-1/2 113 remarks * Also order ** Only select when unit is high/low *** Not applicable for INFRA MONO 87

88 88

89 infra-line Heat only where needed The Mark INFRA-LINE offers the option of heating without displacing air. In addition, heat reaches only the location where it is required. The short warming-up period and the lower room temperature can yield good energy savings. Savings can be as high as 40%. The aluminium reflective hood radiates the radiant heat emitted downwards. Optionally, this hood can be insulated to increase radiation efficiency. Mark supplies the INFRA-LINE in 7 different capacities with the length of the unit increasing as the capacity increases. Possible applications include: sports halls, production facilities, aircraft hangars, showrooms and garages The benefits of radiant heating include: Short warm-up time High floor temperature Silent No air movement Low energy consumption Zone heating Heat only where needed Efficiency 93% 89

90 Dimensions L min m L max m x 258 A x ø ø ø Dimensions of burner + straight modules + end piece A x 3000 A = number of straight modules module 2: : Type L min L max Type L min L max min. max. min. max. 100/50 50m 50m /50 50m 50m 90/44 45m 50m 70/30 30m 30m 80/40 40m 50m 50/30 30m 30m 70/36 36m 50m Technical information Type Nominal power Nominal load (lower value) Gas consumption G25 (15 C) Gas consumption G20 (15 C) Gas consumption G31 (15 C) Gas consumption G30 (15 C) Weight Electrical power Recommended suspension height Minimum suspension height Noise level at 5 m 100/50 90/44 80/40 70/36 70/30 50/ /50 kw /70 kw 107,5 97,2 85,6 74,9 74, ,5/74,9 m 3 /h 13,2 11,9 10,5 9,2 9,2 6,8 13,2/9,2 m 3 /h 11,4 10,3 9,1 7,9 7,9 5,8 11,4/7,9 m 3 /h 1,1 1,0 3,5 3,1 3,1 2,3 4,4/3,1 m 3 /h 3,3 3,0 2,7 2,3 2,3 1,6 3,3/2,3 kg kw 0,7 0,7 0,7 0,7 0,7 0,7 0,7 m 7,0 7,0 6,5 6,5 6,0 6,0 7,0 m 5,0 5,0 5,0 4,5 4,5 4,5 5,0 db(a) Gas-fired radiant heaters - 90

91 Accessories flue gas exhaust Assembly/location suggestions Cross bars (not included) Chains (not included) Suspension rail (optional) Controls Isolator switch Black bulb sensor or or Room thermostat Pintherm Infra Remote control panel SLR 91

92 infra ht HT Ideal for heating tall or poorly insulated buildings The INFRA HT offers the option of heating without displacing air. In addition, heat reaches only the location where it is required. The short warming-up period and the lower room temperature can yield good energy savings. Savings can be as high as 40%. The INFRA HT uses an open ceramic burner for heating. This emits a high level of heat over a relatively small surface area. This high concentration of heat enables these units to be located in tall buildings. As this unit uses open combustion, ventilation within the room must be considered. The room may be ventilated with the Mark MDV, for example see page 56. Mark supplies the INFRA HT in 9 different capacities with the length of the unit increasing as the capacity increases. Possible applications include: construction halls, production facilities, aircraft hangars and stadium grandstands or other open spaces. The benefits of radiant heating include: short warm-up time High floor temperature silent No air movement low energy consumption Zone heating Heat only where needed This appliance is not suitable for heating patios. 92

93 Dimensions e 355 e d a c b a b d c 60 Type a b c d e (mm) (mm) (mm) (mm) (inch/zoll) Infra HT4.2eco /2 Infra HT6.2eco /2 Infra HT8.2eco /2 Infra HT10.2eco /2 Infra HT12.2eco /2 Infra HT16.2eco /2 Infra HT eco /2 Infra HT eco /2 Infra HT eco /2 Type a b c d e (mm) (mm) (mm) (mm) (inch/zoll) Infra HT 4, /2 Infra HT 6, /2 Infra HT 8, /2 Infra HT 10, /2 Infra HT 12, /2 Infra HT 16, /2 Infra HT 10+10, /4 Infra HT 12+12, /4 Infra HT 16+16, /4 Technical information Infra HT / Infra HT eco Surface area exposed to radiation m Nominal load G 20 (upper value) Nominal load G20 (lower value) Nominal load G 25 (upper value) Nominal load G25 (lower value) Nominal load G30 (upper value) Nominal load G30 (lower value) Nominal load G31 (upper value) Nominal load G31 (lower value) Gas-regulating unit Gas consumption G20 (15 C) Gas consumption G25 (15 C) Gas consumption G30 (15 C) Gas consumption G31 (15 C) Electrical power kw 7,2 9,6 16,1 18,3 22,2 26,0 36,6 44,4 52,0 kw 6,5 8,6 14,5 16,5 20,0 23,4 33,0 40,0 46,8 kw 7,2 9,6 16,1 18,3 22,2 26,0 36,6 44,4 52,0 kw 6,5 8,6 14,5 16,5 20,0 23,4 33,0 40,0 46,8 kw 7,0 9,3 13,5 17,9 21,7 25,4 35,8 43,4 50,8 kw 6,5 8,6 12,5 16,5 20,0 23,4 33,0 40,0 46,8 kw 7,0 9,3 13,5 17,9 21,7 25,4 35,8 43,4 50,8 kw 6,5 8,6 12,5 16,5 20,0 23,4 33,0 40,0 46,8 n o m 3 /h 0,69 0,91 1,53 1,75 2,12 2,48 3,50 4,24 4,96 m 3 /h 0,80 1,06 1,78 2,03 2,46 2,88 4,06 4,92 5,76 kg/h 0,51 0,68 0,99 1,30 1,58 1,84 2,60 3,16 3,68 kg/h 0,50 0,67 0,97 1,28 1,55 1,82 2,56 3,10 3,64 W Ignition Electrical connection Weight of HT Weight of HT-eco electronic x x x x x x x x x 230 Volt-50Hz x x x x x x x x x kg (HT) kg (HT-eco) The minimum ventilation air volume of the area is 10 m 3 /h per installed kw. 93

94 Assembly/location suggestions H4 H3 G J E F Recommended suspension height for installing high temperature radiators. (ceiling 0 ) Infra HT / Infra HT H4 min-max m 2,5-4,5 3,5-6,0 4,0-6,0 5,0-7,0 6,0-8,0 6,0-10,0 8,0-11,0 9,0-14, G m 4,0 5,0 7,5 8 8,5 9,0 10,0 11,0 12,0 J m 5,5 7,0 8,0 8,5 9,0 10,0 11,0 12,0 13,0 (floor 45 ) Infra HT / Infra HT H3 min - max m 2,5-4,0 2,9-5,5 3,9-6,5 4,5-7,0 4,7-8,5 5,1-10,0 5,1-11,0 5,6-14,0 6,0-15,0 E m 4,0 5,0 7,5 7,8 8,0 8,5 9,0 10,0 12,0 F m 4,5 6,0 8,0 8,5 9,0 10,0 11,0 12,0 14,0 Minimum distances (ceiling 0 ) Typ A B D A HT4.2 1,0 1,0 2 HT6.2 1,0 1,0 2,5 C HT8.2 1,5 1,5 3,0 HT10.2 1,5 1,5 3,5 HT12.2 1,5 2,0 4,0 B D HT16.2 1,5 2,0 4,5 HT ,0 2,5 5,0 HT ,5 2,5 5,5 HT ,0 2,5 6,0 Minimum distances (floor 45 ) Typ A B C D 45-0 (m) (m) (m) (m) HT4.2 1,0 0,5 2,0 2,4-3,0 HT6.2 1,0 0,5 2,0 2,9-3,5 HT8.2 1,5 0,5 2,5 3,9-4,5 HT10.2 1,5 0,5 2,5 4,2-4,8 HT12.2 1,5 0,5 2,5 4,7-5,5 HT16.2 1,5 0,75 3,0 5,1-6,0 HT ,0 0,75 3,0 5,0-6,2 HT ,5 0,75 3,0 5,6-6,5 HT ,0 1,0 3,5 6,0-7,1 Gas-fired radiant heaters - 94

95 Controls Isolator switch Isolator switch Isolator switch Black bulb sensor External extraction Pintherm Infra

96 Prices Mark INFRA Ht PRODUCT - INFRA HT eco Code nr. Description Price INFRA HT 4.2 eco, Nominal power 6,5 kw, On/Off 905 INFRA HT 6.2 eco, Nominal power 8,6 kw, On/Off 1009 INFRA HT 8.2 eco, Nominal power 14,5 kw, On/Off 1092 INFRA HT 10.2 eco, Nominal power 6,5 kw, On/Off 1175 INFRA HT 12.2 eco, Nominal power 20,0 kw, On/Off 1222 INFRA HT 16.2 eco, Nominal power 23,4 kw, On/Off 1441 INFRA HT eco, Nominal power 33,0 kw, On/Off 1935 INFRA HT eco, Nominal power 40,0 kw, On/Off 2066 INFRA HT eco, Nominal power 46,8 kw, On/Off 2549 INFRA HT on demand ACCESSORIES - CONTROL Code nr. Description Price Pintherm Infra - programmable room thermostat, 230V (4A) **** External Black bulb sensor for Isolator switch, separate delivery, 230V (2 poles) Isolator switch, separate delivery, 400V (4 poles) 55 for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Wall bracket for INFRA HT * Suspended bracket for INFRA HT Suspended bracket for INFRA HT , en ACCESSORIES Code nr. Description Price Flexible gas hose 3/4-1/2 110 Conversion kit natural gas to propane gas** 74 REmark * No wall bracket for INFRA HT , en available ** A conversion kit must be ordered for the exact type of unit and consist of. 1 nozzle 1 technical plate 1 technical manual for instructions *** Only select when the unit is high/low **** Also order Gas-fired radiant heaters - 96

97 infra aqua Silent, pleasant heat from a designer product The INFRA AQUA is a water-supplied aluminium radiation panel, fitted with a glass wool insulation blanket as standard. This insulation blanket prevents heat from being radiated upwards. This appliance offers the option of heating without displacing air. In addition, heat reaches only the location where it is required. The short warming-up period and the lower room temperature can yield good energy savings. The INFRA AQUA has a very wide area of application in both utility and industrial buildings. The panel may even be integrated into a system ceiling. As an option, the aluminium radiant panel can be supplied with PUR hard foam insulation. This form of insulation is frequently used if the panel is installed in rooms sensitive to bacteria. Heating with the INFRA AQUA means heating without any draughts or displacement of air or dust. The panel can be supplied in various widths and lengths, and in RAL 9010 white colour as standard. Other RAL-colours are available on request. Features: Aluminium panel, low weight per metre. Aesthetically pleasing and completely flat panel. High heat delivery compared to steel panels Special designs with ventilation are possible. Galvanized distributors and registers possible when used in wet spaces. Approved in accordance with EN ball-resistant in accordance with DIN dl3 Glass wool insulation (PUR operational) 97

98 Dimensions 28 x 1,5 mm Type Width =A B in mm Suspension points (6m) Number of pipes x2 3x2 3x2 3x2 3x2 3x Technical information = Aluminium radiant reflector 2 = Water-carrying tube 3 = Distributor 4 = Connection, water-side 5 = Suspension profile with M8 blind rivnut 6 = Insulating material Type Heat delivery 15ºC (90/70 C) room temperature Water content Weight of panel GLW (filled) Weight of panel PUR (filled) Weight of distributor GLW/PUR (filled) W/m kg/m kg/m kg/m kg/m ,47 1,96 2,45 2,94 3,43 3,92 6,24 8,49 10,55 12,82 14,67 16,73 6,87 9,44 11,74 15,42 16,35 18,66 1,55 2,13 2,70 3,28 3,86 4,44 Water-supplied radiant heating - 98

99 RADIANT PANEL TYPE to Heat delivery table in W/m1 in accordance with EN K DISTRIBUTOR, TYPE to Heat delivery table in W/m1 in accordance with EN per 2 distributors K K = Average water temperature - room temperature. Values for a mass flow of 0.04 litres per second/pipe. Accessories additional sections Relation between minimum mass flow and return temperature Minimum mass flow in kg/h per pipe Return temperature 99

100 infra aqua eco Economic heating and cooling using a lightweight panel The INFRA AQUA ECO is a watersupplied radiation panel, fitted with a glass wool insulation blanket as standard. This insulation blanket prevents heat from being radiated upwards. This appliance offers the option of heating without displacing air. In addition, heat reaches only the location where it is required. The short warming-up period and the lower room temperature can yield good energy savings. The INFRA AQUA ECO has a very wide area of application in both utility and industrial buildings. The panel is supplied in white RAL 9010 as standard. Other RAL colours are available on request. Features simple installation / suspension low weight per metre. High heat emission Galvanized finish for collectors and registers (optional) linking of panels by means of press couplings Measured and approved in accordance with EN Ball-resistant The panels are delivered in standard lengths of 4 or 6 metres. The panels may also be suspended in parallel with standard widths varying between mm. 100

101 Dimensions 180 TYPE a a 306 ø15 TYPE TYPE TYPE INFRA AQUA ECO Type 1 Type 2 Type 3 Type 4 Tube distance (a) mm Outside diameter of tube mm Installation width of basic element mm Number of suspension points per axis Pieces Operating weight with water content and insulation (4 m) kg 12,4 24,8 37,2 50 Operating weight with water content and insulation (6 m) kg 18, ,5 74 Max. operating temperature: 120 C. Max. operating pressure: 8 bar * Suspension points from centre point to centre point. Technical information = Reflector 2 = Water-carrying tube 3 = Distributor 4 = 1 connection, water side 5 = Suspension set 6 = Press couplings 7 = Insulating material (supplied separately)

102 Medium Medium over temp over temp K Type 1 Type 2 Type 3 Type 4 K Type 1 Type 2 Type 3 Type Heat delivery table for panels in W/m in accordance with EN Heat delivery table per 2 distributors in W/unit in accordance with EN Water-supplied radiant heating Minimum mass flow in kg / h per tube Relation between minimum mass flow and return temperature Return temperature in C

103 infra aqua KP Unique! A heating strip ceiling Aesthetically pleasing, robust, sound attenuating, energy and space-saving strip ceiling to heat the room. The whole ceiling has a uniform surface temperature. The low surface temperature ensures that dust does not burn and that air displacement or draughts do not occur anywhere. The floor temperature related to this system is globally 1 C C higher than the ambient temperature of the room. The temperature in the ceiling will depend on the pipe distance and average water temperature. The visible side of the ceiling consists of a 85mm broad steel strip finished in mat RAL 9010, enclosed in an aluminium supporting framework in which the water-carrying register is installed. This register consists of steel tube rods. The register is attached to the roof structure using suspended ceiling brackets. Possible applications include: offices, sports halls, fitness rooms and showrooms. Features steel strip ceiling Constructed from steel pipes, aluminium contact profiles and steel strips as standard Covered with a 40 mm black PE sealed insulating blanket. Variable pipe distances possible RAL 9010 colour as standard. Other RAL colours available on request. 100 mm modular size sound-dampening through a plenum on top of the ceiling Perforated model possible scratch-resistant in accordance with DIN dl3 103

104 Assembly/location suggestions Technical information = Strip 2 = Tooth profile 3 = Contact profile 4 = Water-carrying tube 5 = Suspension point 6 = Sealed insulation blanket 7 = Attachment 8 = Fastening clip a s Frequency Distance to roof 0,44 0,88 0,92 0,94 0,93 0, mm, unperforated strip 0,60 0,87 0,67 0,39 0,23 0, mm, unperforated strip 0,61 0,75 0,72 0,40 0,25 0, mm, perforated strip 0,59 0,85 0,87 0,97 0,98 0, mm, perforated strip k 2k 4k Frequency Water-supplied radiant heating - 104

105 BLUE Invisible and convenient heating! At Mark we feel comfortable in all markets, including the supply and installation of industrial underfloor heating. You have the project, we have the right solution. We also provide free advice. With regard to the vertical temperature level, the Mark underfloor heating systems offer an excellent solution for the efficient and economic heating of industrial buildings. The whole of the building s interior can be fully utilised with underfloor heating. Since a large heated surface area is available, a low boiler temperature can be used. This means high efficiency and low firing costs. The diverse applications of the Mark underfloor heating system include: workplaces, factory halls with light or heavy machines, warehouses, shops, churches and car showrooms. The heat to be supplied can be realized from all available heat sources. Even waste heat from production processes can be reused. Features: Quiet Pleasant Clean No loss of space No pipework No draught No movement of dust No temperature layering No convection Unlimited service life Possibility of cooling 105

106 Technical information Features of distributor: Distributor for underfloor heating, consists of: Stainless steel tube (VA ), internal diameter 51 mm Primary screw connection 2 Secondary connection 2 ; distance from the connection pieces 80mm Flow section with DN 20 ball valves, connection ¾ Return section with preset DN 20 regulating valves with ¾ connection Modular system Features of PE-RT tube PE-RT tube is made of polyethylene with increased temperature resistance. The most important fields of application are underfloor heating with constant temperatures up to 70 C or a maximum uninterrupted working pressure of 6 bar. equipped with an EVOH oxygen connection. Internal and external quality control can be guaranteed by a continuous and reliable quality. Higher temperatures and pressures are permitted for short periods, but affect creep strength. Bending radius: 5d (external diameter) Colour: natural Dimensions 14x2, 16x2, 17x2, 20x2 mm 25x2.3 mm Features of PE-Xc heating tube PE-Xc tube, made of high-density polyethylene. Internal and external quality control can be guaranteed by continuous and reliable quality. The most important fields of application are underfloor heating with constant temperatures up to 70 C and a maximum uninterrupted working pressure of 6 bar. equipped with an EVOH oxygen connection. Higher temperatures and pressures are permitted for short periods, but affect the creep strength. Bending radius: 5d (external diameter) Colour: natural Dimensions 10.5x1.25, 12x2, 14x2, 16x2, 17x2, 20x2, 25x2.3 mm Water-supplied underfloor heating - 106

107 tanner mda The most versatile hot water air heater on the market The TANNER MDA is a water-supplied suspended air heater which can expel air horizontally or vertically. The unit has a powerful axial fan which means it is suitable for many applications. Mark offers a highly extensive range of accessories for the TANNER MDA allowing it to be aligned to all applications. For example, the unit can be made suitable for external air connection in combination with filtering and a mixing box for the destratification of fresh external air. The unit is also available as an ATEX / EEX-model. (400V) - IP 44 (EX II 2 G EEX e II T3 and T4). The TANNER MDA is designed for use in showrooms, changing rooms, corporate hallways and garages. Features: Manufactured with a corrosion-resistant aluzinc housing as standard Copper/aluminium heat exchanger Highly versatile due to extensive configuration options Available as 230V or 400V IP class 54 EEX / ATEX on request Options: EC-motor (excl. controls) - (230V/ 0-10V) 107

108 Dimensions M8 C B ,5 D 35,5 G Male thread A 160 Male thread G G Type A B C D 2R 3R 4R /4 1 1/ /4 1 1/2 1 1/2 Technical information Type designation MDA H Size: 100,200,300,400 Heat exchanger: number of rows: 2,3,4 3: Motor 2-speed: 3~400V / 50Hz 1: Motor 1~230V / 50Hz type: : 1400 min 1 type: : 1000 min 1 H: high, 1400/1000 or 1400 min 1 L: low, 1000/700 or 1000 min 1 Hot water-supplied air heaters - 108

109 MDA low speed - 1 phase 230V Type 90/70 T 15 Water resistance T15 Outlet temperature at the heat exchanger 80/60 T 15 Outlet temperature at the heat exchanger 60/40 T 15 Outlet temperature at the heat exchanger Speed Air displacement Noise at 5 m Weight without accessories Horizontal throw Vertical throw Consumed current kw kpa C kw C kw C rpm m 3 /h db(a) kg m m A 121L 131L 141L 221L 231L 241L 321L 331L 341L 421L 431L 441L 14,5 17,0 19,0 25,1 30,8 33,3 52,7 65,9 72,1 80,0 101,0 110, ,7 49,4 59,2 42,7 53,0 58,8 38,8 48,0 54,0 38,6 48,6 54,1 11,9 14,1 15,9 20,6 25,4 27,8 43,3 54,1 60,2 65,7 83,1 91,6 36,8 43,6 52,0 37,8 46,3 51,6 34,6 42,1 47,6 34,4 42,7 47,7 6,6 8,3 9,6 11,7 14,4 16,7 24,4 30,2 35,8 36,9 47,2 55,1 27,1 31,7 37,3 27,9 32,8 36,9 26,0 30,1 34,4 25,9 30,7 34, ,5 4,8 4,5 4 8,1 6,8 5,9 7,4 6,2 5,5 0,47 0,47 0,47 0,51 0,51 0,51 1,7 1,7 1,7 2,6 2,6 2,6 Nominal electric power kw 0,09 0,09 0,09 0,12 0,12 0,12 0,33 0,33 0,33 0,55 0,55 0,55 MDA high speed - 1 phase 230V Type 90/70 T 15 Water resistance T15 Outlet temperature at the heat exchanger 80/60 T 15 Outlet temperature at the heat exchanger 60/40 T 15 Outlet temperature at the heat exchanger Speed Air displacement Noise at 5 m Weight without accessories Horizontal throw Vertical throw Consumed current kw kpa C kw C kw C rpm m 3 /h db(a) kg m m A 121H 131H 141H 221H 231H 241H 18,0 22,1 25,1 32,4 42,0 46, ,4 43,9 53,4 37,6 46,4 51,6 14,7 18,3 20,9 26,6 34,5 38,7 33,3 38,9 47,1 33,6 40,8 45,5 8,1 10,6 12,5 14,9 19,3 22,9 25,0 28,8 34,2 25,4 29,4 33, ,9 6,8 6,3 7,7 7,6 7,2 0,67 0,67 0,67 1,35 1,35 1,35 Nominal electric power kw 0,15 0,15 0,15 0,28 0,28 0,28 109

110 MDA lowspeed - 3 phase 400V Type 90/70 T 15 Water resistance T15 Outlet temperature at the heat exchanger 80/60 T 15 Outlet temperature at the heat exchanger 60/40 T 15 Outlet temperature at the heat exchanger Speed Air displacement Noise at 5 m Weight without accessories Horizontal throw Vertical throw Consumed current kw kpa C kw C kw C rpm m 3 /h db(a) kg m m A 123L 133L 143L 223L 233L 243L 323L 333L 343L 423L 433L 443L 14,5 17,0 19,0 26,2 32,4 35,1 52,7 65,9 72,1 84,0 107,0 117, ,7 49,4 59,2 41,9 52,0 57,7 38,8 48,0 54,0 37,7 47,3 52,7 11,9 14,1 15,9 21,6 26,7 29,3 43,3 54,1 60,2 68,9 88,1 97,4 36,8 43,6 52,0 37,1 45,4 50,6 34,6 42,1 47,6 33,6 41,6 46,5 6,6 8,3 9,6 12,2 15,1 17,5 24,4 30,2 35,8 38,7 49,9 58,5 27,1 31,7 37,3 27,5 32,2 33,3 26,0 30,1 34,4 25,4 30,1 34, ,5 5,9 4,5 4 8,1 6,8 5,9 8,5 6,9 5,8 0,1 0,1 0,1 0,3 0,3 0,3 0,68 0,68 0,68 1,0 1,0 1,0 Nominal electric power kw 0,05 0,05 0,05 0,12 0,12 0,12 0,28 0,28 0,28 0,51 0,51 0,51 MDA highspeed - 3 phase 400V Type 90/70 T 15 Water resistance T15 Outlet temperature at the heat exchanger 80/60 T 15 Outlet temperature at the heat exchanger 60/40 T 15 Outlet temperature at the heat exchanger Speed Air displacement Noise at 5 m Weight without accessories Horizontal throw Vertical throw Consumed current kw kpa C kw C kw C rpm m 3 /h db(a) kg m m A 123H 133H 143H 223H 233H 243H 18,0 22,1 25,1 32,4 42,0 46, ,4 43,9 53,4 37,6 46,4 51,6 14,7 18,3 20,9 26,6 34,5 38,7 33,3 38,9 47,1 33,6 40,8 45,5 8,1 10,6 12,5 14,9 19,3 22,9 25,0 28,8 34,2 25,4 29,4 33, ,9 6,8 6,3 7,7 7,6 7,2 0,25 0,25 0,25 0,67 0,67 0,67 Nominal electric power kw 0,14 0,14 0,14 0,33 0,33 0,33 Capacity calculation for other water temperatures T1 T X 40 X X X 50 X X X X X 60 X X X X X X X T1= Temperature difference hot water inlet minus outlet T2= Average water temperature minus air inlet temperature Hot water-supplied air heaters - 110

111 Accessories additional sections Position a Description Vertical louvres Downflow hood 4-sided vertical Downflow hood 4-sided horizontal Destratification hood Mixing box (short) incl. dampers Mixing box for dampers Damper Filter box with filter (EU 3) Flexible connection Corner profile Mesh Mesh Weather grill 50% fresh air intake Weather grill > 50%-100% fresh air intake Transition piece for 13 Empty section 120 mm Rain cap incl. adhesive plate (aluminium) Blanking plate Motor protection damper Empty section 240 mm Wall bracket Ceiling bracket, vertical Shock absorber set for 22 Ceiling bracket, horizontal induction damper Type A B C D E F G H Type I K L N R S T U

112 Assembly/location suggestions 100% Tanner MDA maximum assembly height for TYPE 100 TYPE 200 TYPE 300 TYPE 400 Calculation example: Tanner MDA 123L (Type 100) The table indicates that the air displacement with this unit is: L = 1450 m 3 /h If the intake temperature (Ta) is 15 0C, the table shows that the outlet temperature (Tu) will be 42.8 C. The temperature difference is: Dt = Tu - Ta Dt = Dt = 27.8K The table (TYPE 100) indicates that: A or the basic model, without accessories, the max. suspension height is: = 4m B or the combination with a destratification hood, the max. suspension height is: = 7m Hot water-supplied air heaters - 112

113 Controls Isolator switch Room sensor (optional) Water-tight thermostat V Room thermostat Pintherm Construction thermostat Room thermostat Clock thermostat Water-tight thermostat or or 5-step regulator 230/400V 230V or 400V 113

114 Prices Mark TANNER MDA PRODUCT - HOT WATER AIR HEATER TANNER MDA, 230V Code nr. Description Price MDA 121H, Nominal power 18,0 kw MDA 131H, Nominal power 22,1 kw MDA 141H, Nominal power 25,1 kw MDA 221H, Nominal power 32,4 kw MDA 231H, Nominal power 42,0 kw MDA 241H, Nominal power 46,6 kw MDA 121L, Nominal power 14,5 kw MDA 131L, Nominal power 17,0 kw MDA 141L, Nominal power 19,0 kw MDA 221L, Nominal power 25,1 kw MDA 231L, Nominal power 30,8 kw MDA 241L, Nominal power 33,3 kw MDA 321L, Nominal power 52,7 kw MDA 331L, Nominal power 65,9 kw MDA 341L, Nominal power 72,1 kw MDA 421L, Nominal power 80,0 kw MDA 431L, Nominal power 101,0 kw MDA 441L, Nominal power 110,0 kw 1998 PRODUCT - HOT WATER AIR HEATER TANNER MDA, 400V Code nr. Description Price MDA 123H, Nominal power 18,0 kw MDA 133H, Nominal power 22,1 kw MDA 143H, Nominal power 25,1 kw MDA 223H, Nominal power 32,4 kw MDA 233H, Nominal power 42,0 kw MDA 243H, Nominal power 46,6 kw MDA 123L, Nominal power 14,5 kw MDA 133L, Nominal power 17,0 kw MDA 143L, Nominal power 19,0 kw MDA 223L, Nominal power 26,2 kw MDA 233L, Nominal power 32,4 kw MDA 243L, Nominal power 35,1 kw MDA 323L, Nominal power 52,7 kw MDA 333L, Nominal power 65,9 kw MDA 343L, Nominal power 72,1 kw MDA 423L, Nominal power 84,0 kw MDA 433L, Nominal power 107,0 kw MDA 443L, Nominal power 117,0 kw 1909 Hot water-supplied air heaters - 114

115 ACCESSORIES Code nr. Description Price Vertical louvres MDA type Vertical louvres MDA type Vertical louvres MDA type Vertical louvres MDA type Downflow hood 4-side vert. MDA type Downflow hood 4-side vert. MDA type Downflow hood 4-side vert. MDA type Downflow hood 4-side vert. MDA type Downflow hood 4-side hor. MDA type Downflow hood 4-side hor. MDA type Downflow hood 4-side hor. MDA type Downflow hood 4-side hor. MDA type Destrification hood MDA type Destrification hood MDA type Destrification hood MDA type Destrification hood MDA type For an good selection of specific projects please contact our sales department ACCESSORIES - CONTROL Code nr. Description Price Control box 5-steps, 230V, 6,0A Control box 5-steps, 230V, 12,0A Control box 5-steps, 230V, 14,0A Control box 5-steps, 400V, 2A Control box 5-steps, 400V, 4A Control box 5-steps, 400V, 7A High / low / off control, 400V, 7A Isolator switch, separate delivery, 230V (4 poles) Isolator switch, separate delivery, 400V (8 poles) Room thermostat 230V, (6A) Water resistant room thermostat, 230V, IP Contact thermostat (4A) Clock thermostat (1A) Pintherm - programmable room thermostat, 230V (4A) Room sensor only in combination with for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Wall brackets horizontal, MDA type Ceiling brakets horizontal, MDA type Mounting bracket Ceiling brackets vertical for MDA type Ceiling brackets vertical for MDA type Ceiling brackets vertical for MDA type Ceiling brackets vertical for MDA type Shock absorber set for above mentioned brackets MDA type 100 only in combination with Shock absorber set for above mentioned brackets MDA type 200 only in combination with Shock absorber set for above mentioned brackets MDA type 300 only in combination with Shock absorber set for above mentioned brackets MDA type 400 only in combination with

116 ACCESSORIES - COLOURS * REmark Description Price MDA Type 100 Accessories provided with colour 1 tot 3 pieces (by piece) 110 MDA Type 100 Accessories provided with colour 4 tot 10 pieces (by piece) 94 MDA Type 100 Accessories provided with colour for more than 10 pieces (by piece) 68 TANNER MDA 100 provided with colour 57 MDA Type 200 Accessories provided with colour 1 tot 3 pieces (by piece) 120 MDA Type 200 Accessories provided with colour 4 tot 10 pieces (by piece) 105 MDA Type 200 Accessories provided with colour for more than 10 pieces (by piece) 73 TANNER MDA 200 provided with colour 73 MDA Type 300 Accessories provided with colour 1 tot 3 pieces (by piece) 135 MDA Type 300 Accessories provided with colour 4 tot 10 pieces (by piece) 115 MDA Type 300 Accessories provided with colour for more than 10 pieces (by piece) 78 TANNER MDA 300 provided with colour 78 MDA Type 400 Accessories provided with colour 1 tot 3 pieces (by piece) 140 MDA Type 400 Accessories provided with colour 4 tot 10 pieces (by piece) 120 MDA Type 400 Accessories provided with colour for more than 10 pieces (by piece) 84 TANNER MDA 400 provided with colour 94 * These prices are only for the Mark standard RAL-colours: 3002 red, 1028 yellow, 6010 green, 7016 gray, 8014 brown, 9001 beige white, 5009 blue, 2009 orange, 1019 beige Hot water-supplied air heaters - 116

117 tanner mdc Versatile hot water air heater with centrifugal fan The TANNER MDC is a water-supplied suspended air heater which can expel air horizontally or vertically. The unit has a powerful centrifugal fan which means it is suitable for many applications. Mark offers a highly extensive range of accessories for the TANNER MDC allowing it to be aligned to specific client requirements. For example, the unit can be made suitable for external air connection in combination with filtering and a mixing box for the destratification of fresh external air. The MDC is highly suitable for connection to a duct system. The MDC is designed for use in showrooms, changing rooms, corporate hallways and garages. Features: Manufactured with a corrosion-resistant aluzinc housing as standard Copper/aluminium heat exchanger Highly versatile due to extensive configuration options Available as 230V or 400V 117

118 Dimensions T A B C D mm mm mm mm kw A B C D kw kw kw Technical information Type Air displacement m3/h minimum Air displacement m3/h <7.800 <8.800 <9.300 maximum External pressure Pa Noise level (5 m) db(a) Supply voltage (50Hz) V 1~230V 1~230V 1~230V 3~400V+N 3~400V+N 3~400V+N 3~400V+N Motor kw 0,42 0,55 0,75 1,1 1,5 2,2 3 Consumed current A 4,4 6,3 6,8 2,8 3,7 5 6,9 See MDA tables on pages 103/104 for heat delivery. Type designation MDC Size: 100,200,300,400 Heat exchanger: number of rows: 2,3,4 Type 400: 3: Motor 3~400V / 50Hz Type : 1: Motor 1~230V / 50Hz 3-speed type: : 1400 min 1 type: : 1000 min 1 Hot water-supplied air heaters - 118

119 Accessories additional sections Type A B C D E F G H Type I K L N R S T U Position a Description Vertical louvres Downflow hood 4-sided vertical Downflow hood 4-sided horizontal Destratification hood Mixing box incl. dampers Mixing box for dampers Damper Filter box with filter (EU 3) Flexible connection Corner profile Mesh Mesh Weather grill 50% fresh air intake Weather grill > 50%-100% fresh air intake Transition piece for 13 Empty section 120 mm Rain cap incl. adhesive plate (aluminium) Blanking plate Motor protection strip Empty section 240 mm induction damper 119

120 Assembly/location suggestions 100% 50% MDC 230V Isolator switch Controls MDC Type 100/200/300 1~230V Motor control box 3-step switch Room thermostat Construction thermostat Pintherm Room sensor (optional) (1 or 4) Thermostat 3-step switch or or or BMS Isolator switch MDC Type 400 3~400V Motor control box Room thermostat Construction thermostat Pintherm Room sensor (optional) (1 or 4) or or or BMS Hot water-supplied air heaters - 120

121 tanner FBA The luxury hot water air heater The Mark TANNER FBA is an aesthetically attractive water-supplied suspended air heater with an axial fan. The FBA is supplied with a powder coating as standard. The unit is supplied in four different models with varying air inlets and outlets. With its low height, the FBA is suitable to heat rooms with low ceilings. The TANNER FBA is a low maintenance and silent air heater. This unit can be used to heat a showroom in a short period of time. The FBA is designed for use in showrooms, offices, changing rooms and shops. Features: Attractive appearance simple installation low maintenance Powerful fan 121

122 Dimensions V model 14, ,5 a b Type a b g 32 FBA 600 V g a b FBA 700 V FBA 800 V ø9 30,5 H1 model 14,5 c ,5 16 a b a b e x f Type a b c c1 e f FBA 600 H ,5 ø9 FBA 700 H FBA 800 H H2 model 14, ,5 16 a b General data: Strip spacing: 2.1mm Water side connection: 1 external thread Drainage connection: 1/8 Maximum water inlet temperature: 120 C Maximum working pressure: 16 bar Maximum room temperature: ± 40 C e x f 30,5 ø9 a b Technical information Type /60 T 15 kw 17,3 23,0 25,0 31,3 32,5 41,5 Air outlet temperature at the exchanger C /50 T 15 kw 13,7 18,3 19,9 26,6 25,9 33,2 Air outlet temperature at the exchanger C /40 T 15 kw 10,1 13,5 14,8 19,8 19,4 24,9 Air outlet temperature at the exchanger C Speed rpm Air displacement m 3 /h Noise level (3 m) db(a) Weight without accessories (type H/V) kg 23/28 25/30 35/42 18/44 42/50 45/53 Consumed current 400V / 230V A 0,2/1,0 0,2/1,0 0,5/1,9 0,5/1,9 0,8/2,1 0,8/2,1 Hot water-supplied air heaters - 122

123 Type designation FBA Size: 600, 700, 800 Heat exchanger: number of rows: 2,3 1: Motor 2-speed: 3~400V / 50Hz 3: Motor 1~230V / 50Hz type: : 1400 min 1 type: : 1000 min 1 Assembly/location suggestions Type V Type H1 Type H2 Type a (m) Type a (m) b Type a (m) b FBA 600 4,0 FBA 700 4,5 FBA 800 5,0 FBA 600 2,5 4 FBA 700 2,8 4,8 FBA 800 3,4 5 FBA 600 2,5 4 FBA 700 2,8 4,8 FBA 800 3,4 5 Controls Isolator switch or or Room sensor (optional) (1 or 4) 5-step regulator 230/400V Construction thermostat Room thermostat or Clock thermostat or Water-tight thermostat Room thermostat Pintherm Water-tight thermostat V 230V or 400V 123

124 Prices Mark TANNER FBA PRODUCT - WARM WATER AIR HEATER TANNER FBA, 230V - ON STOCK Code nr. Description Price FBA H1 623, nominal power 18,2 kw FBA H1 723, nominal power 26,3 kw FBA H1 823, nominal power 33,9 kw 1498 PRODUCT - WARM WATER AIR HEATER TANNER FBA, 230V - NOT ON STOCK Code nr. Description Price FBA H1 633, nominal power 24,5 kw FBA H1 733, nominal power 35,4 kw FBA H1 833, nominal power 44,4 kw FBA H2 623, nominal power 18,2 kw FBA H2 633, nominal power 24,5 kw FBA H2 723, nominal power 26,3 kw FBA H2 733, nominal power 35,4 kw FBA H2 823, nominal power 33,9 kw FBA H2 833, nominal power 44,4 kw FBA V 623, nominal power 18,2 kw FBA V 633, nominal power 24,5 kw FBA V 723, nominal power 26,3 kw FBA V 733, nominal power 35,4 kw FBA V 823, nominal power 33,9 kw FBA V 833, nominal power 44,4 kw 1998 ACCESSORIES - CONTROL Code nr. Description Price Control box 5-steps, 230V, 6,0A Control box 5-steps, 230V, 12,0A Control box 5-steps, 230V, 14,0A Control box 5-steps, 400V, 2A Control box 5-steps, 400V, 4A Control box 5-steps, 400V, 7A High / low / off control, 400V, 7A Isolator switch, separate delivery, 230V (4 poles) Isolator switch, separate delivery, 400V (8 poles) Isolator switch, pre-wired, 230V (4 poles) Isolator switch, pre-wired, 400V (8 poles) Room thermostat 230V, (6A) Water resistant room thermostat, 230V, IP Contact thermostat (4A) Clock thermostat (1A) Pintherm - programmable room thermostat, 230V (4A) 348 for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Spacers set for H1 version 46 Hot water-supplied air heaters - 124

125 tanner FBA ultra Design hot water air heater and cooler The Mark TANNER FBA ULTRA is a design water-supplied suspended air heater with an axial fan. The FBA ULTRA is supplied with a white powder coating as standard. The unit is supplied in 2 different models with varying air inlets and outlets. With its low height, the FBA ULTRA is suited for location in rooms with a low ceiling. In addition to heating, the FBA ULTRA can also be used for cooling. The TANNER FBA ULTRA is a low maintenance and silent air heater/ cooler. This unit can be used to heat or cool a showroom in a short period of time. The FBA ULTRA is designed for use in showrooms, offices, changing rooms, fitness areas and shops. Features: Attractive appearance Simple installation Low maintenance Powerful fan 125

126 b a Dimensions General data: Strip spacing: 2.1mm Water side connection: 1 external thread Drainage connection: 1/8 Maximum water inlet temperature: 120 C Maximum working pressure: 16 bar Maximum room temperature: ± 40 C 470 c d Type K K K size a size b size c size d Technical information Water-supplied ceiling air heater FBA Ultra Size Type K K K Air displacement m 3 /h Supply voltage (50Hz) V 1~230* 1~230* 3~400+N 1~230* 1~230* 3~400+N 1~230* 1~230* 3~400+N Speed 1/min / / /490 Motor capacity kw 0,22 0,22 0,04/0,03 0,45 0,45 0,11/0,07 0,45 0,45 0,17/0,10 Current consumption A 1,0 1,0 0,11/0,05 1,90 1,90 0,27/0,13 2,10 2,10 0,47/0,21 Heat exchanger 2 RR 3 RR 3 RR 2 RR 3 RR 3 RR 2 RR 3 RR 3 RR Heating capacity kw 21,4 28,3 21,5 30,7 40,8 34,8 33,9 50,8 46,2 Outlet temperature C 39,1 52,4 58,3 37,3 50,3 53,9 35,7 49,5 51,7 Heating capacity kw 9,7 12,9 9,88 14,1 18,9 16,1 18,5 23,6 21,5 Outlet temperature C 31,8 35,8 37,7 31,4 35,3 36, ,2 35,9 Cooling capacity 6/12 T32 rv40 kw - - 8, , ,1 Outlet temperature C , , ,3 Water resistance 90/70 kpa 6,43 4,47 3,6 15,3 10,6 10,4 28,4 18,2 20 Water resistance 50/40 kpa 2,47 1,73-6,03 4,2-11,4 7,3 - Noise level at (3 m) db(a) Weight kg Diameter mm Height mm Height with intake cone mm * 400 V on request Hot water-supplied air heaters - 126

127 Assembly/location suggestions Controls Isolator switch or or Room sensor (optional) step regulator 230/400V Construction thermostat Room thermostat or Clock thermostat or Water-tight thermostat Room thermostat Pintherm Water-tight thermostat V 230V or 400V 127

128 Prices Mark TANNER FBA ULTRA PRODUCT - WARM WATER AIR HEATER TANNER FBA ULTRA, 230V - ON STOCK Code nr. Description Price FBA ultra 623-6H1, nominal power 18,2 kw FBA ultra 723-6H1, nominal power 26,3 kw FBA ultra 823-6H1, nominal power 33,9 kw 2294 PRODUCT - WARM WATER AIR HEATER TANNER FBA ULTRA, 230V - NOT ON STOCK Code nr. Description Price FBA ultra 633-6H1, nominal power 24,5 kw FBA ultra 733-6H1, nominal power 35,4 kw FBA ultra 833-6H1, nominal power 44,4 kw 2377 PRODUCT - TANNER FBA ULTRA - CHILLED WATER, 400V Code nr. Description Price FBA-K Ultra 636-6H1, nominal power 23,5 / 9,0 kw FBA-K Ultra 736-6H1, nominal power 33,4 / 13,61 kw FBA-K Ultra 836-6H1, nominal power 41,7 / 17,8 kw 3136 ACCESSORIES Code nr. Description Price FBA-600 Inlet ring for air inlet from the side FBA-700 Inlet ring for air inlet from the side FBA-800 Inlet ring for air inlet from the side 260 ACCESSORIES Code nr. Description Price Room thermostat 230V, (6A) Contact thermostat (4A) Clock thermostat (1A) Pintherm - programmable room thermostat, 230V (4A) Control box 5-steps, 230V, 6,0A Control box 5-steps, 230V, 12,0A Control box 5-steps, 230V, 14,0A Control box 5-steps, 400V, 2A Control box 5-steps, 400V, 4A Control box 5-steps, 400V, 7A High / low / off control, 400V, 7A Isolator switch, separate delivery, 230V (4 poles) Isolator switch, separate delivery, 400V (8 poles) Isolator switch, pre-wired, 230V (4 poles) Isolator switch, pre-wired, 400V (8 poles) 213 for function explanation see chapter on control ACCESSORIES - ASSEMBLY Code nr. Description Price Spacers set for H1 version 46 Hot water-supplied air heaters - 128

129 tanner ZDA multi System ceiling air heater The Mark TANNER ZDA is a watersupplied air heater designed to be integrated into a system ceiling. The unit is fitted with an axial fan. The unit is supplied as standard with a white powder coating, and is suitable for location in rooms where high demands are placed on the interior architecture. The unit is supplied in several models with varying air inlets and outlets. The TANNER ZDA MULTI is a low maintenance and silent air heater. Several units are linked to one another electrically and operated by the optional thermostat. The ZDA is designed for use in showrooms, offices, changing rooms and shops. Features Attractive appearance Low maintenance cost Powerful fan 129

130 Dimensions RP 3/ Technical information Motor speed Air displacement at intake Temperature air intake Heat with medium water 50/40 C Heat with medium water 60/50 C Heat with medium water 70/50 C Heat with medium water 80/60 C Heat with medium water 90/70 C Motor power Maximum current consumption Consumed current 230V Throw / Side Water content Noise level rpm m 3 /h t intake kw t out C kw t out C kw t out C ,0 14 9,3 15 7,2 20 +/-0 7,5 21 7,0 23 5, ,9 29 4,6 30 3, ,0 32 3,7 32 2, , ,0 21 8,5 26 +/-0 9,3 27 8,7 28 6, ,7 34 6,3 36 4, ,9 37 5,5 38 4, , ,5 23 9,0 28 +/-0 9,8 28 9,2 30 7, ,3 36 6,7 37 5, ,4 38 6,0 40 4, , , ,3 34 +/-0 11, ,9 36 8, ,2 41 8,6 43 6, ,3 44 7,7 46 6, , , ,7 41 +/-0 13, ,6 41 9, , ,3 49 8, ,2 49 9,5 52 7,4 55 W A 1,45 1,3 1,0 A 1,05 0,97 0,79 m 4,5 4,0 2,5 dm db(a) Hot water-supplied air heaters - 130

131 Conversion table for other water temperatures (factor 1.00 = 90 /70 C intake temperature 15 C) , , , , , , DT1= temperature difference of hot water supply / return Calculation example: conversion factor water 60 /40 C and 15 C intake temperature ( ) 15 C = 35 2 conversion factor = 0,47 T1 = = 20 Assembly/location suggestions 131

132 Controls Isolator switch Isolator switch Isolator switch 3-step thermostat TA Prices Mark TANNER ZDA Multi PRODUCT - TANNER ZDA MULTI R, 230V code nr. Description Price ZDA Multi R 2122 ACCESSORIES - CONTROL code nr. Description Price Room thermostat 230V, with a 3-step control, (6A) Isolator switch 4-poles 230V, separate delivery Isolator switch 4-poles 230V, pre-wired. 193 for function explanations see chapter on control Hot water-supplied air heaters - 132

133 easyair Keep cold and contaminated air outside Due to its broad range, the EASYAIR water-supplied or electric air curtain can be used in any sort of open entrance, such as in shops, supermarkets, builder s merchants, offices and hospitals. The air curtain is suitable for an installation height of up to 3.50 metres and is available in widths from 1.0 to 3.0 metres. Suitable for use in shops, offices, hospitals and factories. Features: Extensive range Standard white finish Simple installation Easy to maintain The use of a three-row heat exchanger means that the EASYAIR air curtain is energy efficient. The water-supplied air curtain is supplied as standard for a low water temperature of 60/40ºC. The conversion table may be used for other water temperatures. By using a thermostatic 3-way valve, the air outlet temperature of the air curtain can be kept constant. 133

134 Dimensions Lengths A (mm) TYPE S/M/L Lengths A (mm) TYPE GX/GXX Technical information Conversion table Ta Water C Ta Air Ta Air Ta Air + 15 C +18 C +20 C 100/80 2,77 2,65 2,56 90/70 2,38 2,25 2,17 80/60 1,98 1,86 1,78 70/50 1,58 1,46 1,38 60/40 1,20 1,08 1,00 55/35 1,00 0,89 0,80 Hot water-supplied air heaters - 134

135 Type Length Air Heating Water-side Water Connection Electrical Connec- Nominal Current Sound Weight displace- capacity resistance connection voltage of heating tion power fan pressure ment of water water 60/40 C heating capacity voltage 60/40 C element of fans mm m 3 /h kw kpa Inside V (50 Hz) kw V (50 Hz) kw A db(a)* kg wire Easyair S recommended mounting height (lower side of air curtain) max. 2,10 m S 1000 P ,50 2,50 2 x 3/4 1 ~ 230 0,370 1,66 40/53 45 S 1500 P ,00 10,70 2 x 3/4 1 ~ 230 0,555 2,49 40/54 76 S 2000 P ,10 4,30 2 x 3/4 1 ~ 230 0,740 3,32 40/ S 2500 P ,70 7,30 2 x 3/4 1 ~ 230 0,925 4,15 40/ S 1000 E ~ 400 3/6/9 1 ~ 230 0,370 1,66 40/53 45 S 1500 E ~ 400 4/8/12 1 ~ 230 0,555 2,49 40/54 76 S 2000 E ~ 400 6/12/18 1 ~ 230 0,740 3,32 40/ S 2500 E ~ 400 6/12/18 1 ~ 230 0,925 4,15 40/ Easyair M recommended mounting height (lower side of air curtain) max. 2,4 m M 1000 P ,70 6,30 2 x 3/4 1 ~ 230 0,555 2,49 40/54 47 M 1500 P ,30 7,90 2 x 3/4 1 ~ 230 0,740 3,32 40/55 78 M 2000 P ,80 7,80 2 x 3/4 1 ~ 230 0,925 4,15 40/ M 2500 P ,10 5,80 2 x 3/4 1 ~ 230 1,110 4,98 40/ M 1000 E ~ 400 3/6/9 1 ~ 230 0,555 2,49 40/54 47 M 1500 E ~ 400 4/8/12 1 ~ 230 0,740 3,32 40/55 78 M 2000 E ~ 400 6/12/18 1 ~ 230 0,925 4,15 40/ M 2500 E ~ 400 6/12/18 1 ~ 230 1,110 4,98 40/ Easyair L recommended mounting height (lower side of air curtain) max. 2,7 m L 1000 P ,80 7,80 2 x 3/4 1 ~ 230 0,821 3,57 40/55 50 L 1500 P ,10 14,40 2 x 3/4 1 ~ 230 1,095 4,76 40/56 80 L 2000 P ,10 12,20 2 x 3/4 1 ~ 230 1,642 7,14 40/ L 2500 P ,60 10,30 2 x 3/4 1 ~ 230 1,916 8,33 40/ L 1000 E ~ 400 5/10/15 1 ~ 230 0,821 3,57 40/55 50 L 1500 E ~ 400 7,5/15/22,5 1 ~ 230 1,095 4,76 40/56 80 L 2000 E ~ /20/30 1 ~ 230 1,642 7,14 40/ L 2500 E ~ ,7/21,4/32 1 ~ 230 1,916 8,33 40/ Easyair GX recommended mounting height (lower side of air curtain) max. 3 m Easyair GXX recommended mounting height (lower side of air curtain) max. 3,6 m GX 1000 P ,60 1,55 2 x 1 1 ~ 230 0,880 4,60 40/55 95 GX 1500 P ,10 3,03 2 x 1 1 ~ 230 1,320 6,90 40/ GX 2000 P ,10 3,41 2 x 11/4 1 ~ 230 1,760 9,20 40/ GX 2500 P ,30 4,40 2 x 11/4 1 ~ 230 2,200 10,20 40/ GXX 1000 P ,70 1,97 2 x 1 1 ~ 230 1,140 9,90 40/ GXX 1500 P ,40 3,69 2 x 1 1 ~ 230 1,710 13,35 40/ GXX 2000 P ,60 3,38 2 x 11/4 1 ~ 230 2,280 17,80 40/ GXX 2500 P ,80 5,85 2 x 11/4 1 ~ 230 2,850 23,00 40/ * Measured at 3m. 135

136 Accessories additional sections Type GTM 1 5-position controller for hot water air curtain. Do not switch more than 10 air curtains in parallel on one GTM 1 controller. Type GTM 1E 5-position controller for electrically heated air curtains. Standard controller. The parallel connection of multiple air curtains on one controller is not possible! Dimensions 122 x 70 x 35 mm Dimensions 122 x 70 x 35mm Connecting cable between controller and air curtain Thermostatic three-way valve Room thermostat Door contact Ceiling fixing set Assembly/location suggestions Hot water-supplied air heaters - 136

137 Controls Easyair P (hot water air curtain) Isolator switch (Optional) Frost thermostat Three-way valve Door contact Isolator switch (Optional) Frost thermostat Three-way valve Door contact * * BMS BMS (Optional) (Optional) (Optional) (Optional) (Optional) (Optional) * * Thermostat GTM 1 Thermostat GTM * Only in combination with thermostat GTM 11 Easyair E (electrically heated air curtain) Isolator switch (Optional) (Optional) (Optional) Room BMS thermostat Door contact or (Optional) BMS (Optional) Door contact Thermostat GTM 1E Thermostat GTM 11E * Only in combination with thermostat GTM 11E 137

138 Prices Mark EASYAIr PRODUCT - AIR CURTAIN TYPE S - MAX. MOUNTING HEIGHT 2,2 M Code nr. Description Price Easyair S1000 P, nominal power 6,5 kw Easyair S1500 P, nominal power 10,0 kw Easyair S2000 P, nominal power 14,1 kw Easyair S2500 P, nominal power 18,7 kw Easyair S1000 E, nominal power 3 / 6 / 9 kw Easyair S1500 E, nominal power 4 / 8 / 12 kw Easyair S2000 E, nominal power 6 / 12 / 18 kw Easyair S2500 E, nominal power 6 / 12 / 18 kw 4058 PRODUCT - AIR CURTAIN TYPE M - MAX. MOUNTING HEIGHT 2,5 M Code nr. Description Price Easyair M1000 P, nominal power 9,7 kw Easyair M1500 P, nominal power 13,3 kw Easyair M2000 P, nominal power 20,8 kw Easyair M2500 P, nominal power 24,1 kw Easyair M1000 E, nominal power 3 / 6 / 9 kw Easyair M1500 E, nominal power 4 / 8 / 12 kw Easyair M2000 E, nominal power 6 / 12 / 18 kw Easyair M2500 E, nominal power 6 / 12 / 18 kw 4323 PRODUCT - AIR CURTAIN TYPE L - MAX. MOUNTING HEIGHT 3,0 M Code nr. Description Price Easyair L1000 P, nominal power 10,8 kw Easyair L1500 P, nominal power 18,1 kw Easyair L2000 P, nominal power 26,1 kw Easyair L2500 P, nominal power 32,6 kw Easyair L1000 E, nominal power 5 / 10 / 15 kw Easyair L1500 E, nominal power 7,5 / 15 / 22,5 kw Easyair L2000 E, nominal power 10 / 20 / 30 kw Easyair L2500 E, nominal power 10,7 / 21,4 / 32 kw 4734 PRODUCT - INDUSTRIAL AIR CURTAIN TYPE L - MAX. MOUNTING HEIGHT 3,2 M Code nr. Description Price Easyair GX1000 P, nominal power 16,6 kw Easyair GX1500 P, nominal power 27,1 kw Easyair GX2000 P, nominal power 37,1 kw Easyair GX2500 P, nominal power 47,3 kw 7439 PRODUCT - INDUSTRIAL AIR CURTAIN TYPE L - MAX. MOUNTING HEIGHT 3,6 M Code nr. Description Price Easyair GXX1000 P, nominal power 19,7 kw Easyair GXX1500 P, nominal power 31,4 kw Easyair GXX2000 P, nominal power 42,6 kw Easyair GXX2500 P, nominal power 54,8 kw 7933 ACCESSORIES - CONTROL Code nr. Description Price Room thermostat Frost thermostat separate delivery Frost thermostat assembled Door contact only in combination with or Speed controller tronic P-H-A used by door contact only in combination with Speed controller tronic E-H-A used by door contact (electrical unit) only in combination with Hot water- supplied air heaters - 138

139 Isolation switch 3-poles for type P Isolation switch 6-poles for type E (9-15 kw) Isolation switch 6-poles for type E (18-22 kw) Isolation switch 6-poles for type E (30-32 kw) Data cable 20 m Data cable 50 m Data cable connector 12 for function explanations see chapter on control ACCESSORIES - WATER-SIDE CONTROL Code nr. Description Price way valve DN 20 3/ way valve DN way valve DN / Magnet valve DN 20 3/ Magnet valve DN Magnet valve DN /4 661 ACCESSORIES - ASSEMBLY Code nr. Description Price Mounting set M8-4 for type 1000/1500/ Mounting set M8-6 for type 2500/ Ground frame for vertical positioning * Deflating for vertical positioning * Air curtain painted in RAL color by choice 759 REmark * On applications 139

140 bender WARANTY 10 YEAR The indestructible powerhouse The Mark hydraulic bending machine is an indispensable tool for bending various tube materials with an external diameter from 3/8 to 4. The bending machine is supplied in a wooden box, containing all the materials needed to build it. The machine can therefore be quickly put to work. Features: Robust Long life Supplied in sturdy wooden box Low weight folding frame Open frame for repetitive bending work Manual and motor control Parts and repair kits available Stand available as an option

141 Technical information Type Standard bending jigs, bend 90, external diameter Wall thickness DIN 2440 (150 medium, ISO R65) Wall thickness DIN 2441 (150 heavy, ISO R65) Bending radii Standard equipment 1023/1013 inch 3/8 1/2 3/4 1 11/4 mm mm mm mm bending jigs 2 bending blocks with dowel pins 1 U clamp 2023/2013 3/8 1/2 3/4 1 11/4 11/ bending jigs 2 bending blocks with dowel pins 1 U clamp /8 1/2 3/4 1 11/4 11/2 2 21/ bending jigs 2 bending blocks with dowel pins 1 U clamp Type Standard bending jigs, bend 90, external diameter Wall thickness DIN 2440 (150 medium, ISO R65) Wall thickness DIN 2441 (150 heavy, ISO R65) Bending radii Standard equipment 4013 inch 3/8 1/2 3/4 1 11/4 11/2 2 21/ /8 1/2 3/4 1 11/4 mm mm mm mm bending jigs 4 bending blocks 1 straightener 2 pins for pipe extrusion 4 2 extension rams bending jigs 2 bending blocks with dowel pins 1 U clamp 2323/2313 3/8 1/2 3/4 1 11/4 11/ bending jigs 2 bending blocks with dowel pins 1 straightener 1 U clamp Type Standard bending jigs, bend 90, external diameter Wall thickness DIN 2440 (150 medium, ISO R65) Wall thickness DIN 2441 (150 heavy, ISO R65) Bending radii Standard equipment 3313 inch 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3 mm mm mm mm bending jigs 2 bending blocks with dowel pins 1 straightener, 1 U clamp 1 extension rams /8 1/2 3/4 1 11/4 11/2 2 21/ mm mm mm mm 10 bending jigs 4 bending blocks with dowel pins 1 straightener 2 extension rams 141

142 Prices Mark BENDer PRODUCT - Bending machines, complete with 90 formers for gas and steam pipes (standard supply in portable container) Code nr. Description Price Hand-hydraulic Mark 1013, tip-up wing head 3/8-1 1/ Hand-hydraulic Mark 1023, open wing head 3/8-1 1/ Hand-hydraulic Mark 2013, tip-up wing head 3/ Hand-hydraulic Mark 2023, open wing head 3/ Hand-hydraulic Mark 3013, tip-up wing head 3/ Hand-hydraulic Mark 4013, tip-up wing head 3/ Electro hydraulic Mark 1323, open wing head 3/8-1 1/4, 400V Electro hydraulic Mark 1323, open wing head 3/8-1 1/4, Electro hydraulic Mark 1323, open wing head 3/8-1 1/4, Electro hydraulic Mark 2313, tip-up wing head 3/8-2, 400V Electro hydraulic Mark 2313, tip-up wing head 3/8-2, 230V Electro hydraulic Mark 2313, tip-up wing head 3/8-2, 115V Electro hydraulic Mark 2323, open wing head 3/8-2, 400V Electro hydraulic Mark 2323, open wing head 3/8-2, 230V Electro hydraulic Mark 2323, open wing head 3/8-2, 115V Electro hydraulic Mark 3313, tip-up wing head 3/8-3, 400V Electro hydraulic Mark 3313, tip-up wing head 3/8-3, 230V Electro hydraulic Mark 3313, tip-up wing head 3/8-3, 115V Electro hydraulic Mark 4313, tip-up wing head 3/8-4, 400V Electro hydraulic Mark 4313, tip-up wing head 3/8-4, 230V Electro hydraulic Mark 4313, tip-up wing head 3/8-4, 115V REmark For all accessories ask our sales department. Hydraulic bending machine - 142

143 control equipment Mark takes care of it for you! Devices can be regulated and controlled in various ways. Each individual will have his own ideas and requirements. Mark has thus developed a range of options from standard to projectspecific. Our range includes various types of thermostats, speed controllers, packaged digital controllers and full custom made power and control panels, enabling the user to control a single unit or multiple units. Our range consists of: full range of thermostats and sensors time controls Packaged digital time and temperature controllers Speed controllers including variable speed drives (VSD) Custom-made power and control panels Mark has its own electrical engineering and manufacturing department and is therefore able to offer a solution for any control requirement. Our engineers would be pleased to advise you. Simply contact them to discuss the options within our range of control equipment. 143

144 (Room) thermostats and time switches 230 V room thermostat Order code: A room thermostat for 1 to 1 control of a device based on room temperature. Specifications: Required temperature adjustable from 5 30 C. Switch contact voltage free max. 4A / 230V. 230 V room thermostat with selector, reset button and failure lamp Order code: An extensive room thermostat with summer/ winter switch, failure alert and reset button thermostat for 1 to 1 control of a device based on room temperature. Specifications: Required temperature adjustable from 5 30 C. selector for burner on/off/heat out setting. Selector for heat /ventilate or high/low. Indicator lamp for burner trip reset button to reset a burner trip Clock thermostat Ram 832 Order code: A digital clock thermostat for 1 to 1 control of a device based on room temperature. Specifications: Language can be set to English, German, Dutch, French, Italian or Spanish. Switch contact, voltage free safety low tension max. 6A(1)/250V~ min. 1mA 5V. Temperature measurement range 0 50 C increments of 0.1 C. Temperature setting range 6 30 C in stages from 0.2 C. 3 control programmes, 2 pre-programmed, 1freely programmable with 22 memory points, programmable for Mon-Fri, Sat-Sun, every day or separate days. Automatic switching between summer/winter. Protection class IP20 in accordance with EN x alkaline batteries, 1.5V, type AA. Power back up when battery replaced 10 minutes. Can be used for: föhn on/off model MDA 230V model MDC 230V model FBA 230V model 5-position controller 230V, see page 144 High/low/off controller, see page 145 Can be used for: G C shopheater Infra on/off and high/low model. Infra Mono on/off and high/low model. Can be used for: 5-position controller 230V, see page 144 High/low/off controller, see page 145 Control equipment - 144

145 OpenTherm clock thermostat Mark PinTherm Mark PinTherm Infra Order code: Digital clock thermostat with OpenTherm protocol for modulating, 1 to 1 control of the GS+ or GC+ air heater based on room temperature. Specifications: Language can be set to English, German, Dutch, French, Italian or Spanish. Fixed programme (10 years). 3 control programmes, 2 pre-programmed, 1freely programmable with 32 memory points, for Mon-Fri, Sat-Sun, every day or separate days. Holiday programme, can be set by date and time. Measurement range from 0 50 C per 0.1 C. Adjustment range from 6 30 C per 0.2 C. Automatic switching between summer/winter. option for manual comfort or eco mode can be set for temporary extension or interruption. Corporate failure report on the display. (Burner) failure reset with the OK button. Power reserve clock approx. 20 minutes. option to connect an external room temperature sensor. Order code: Digital room thermostat with internal room temperature sensor for on/off control of a device based on room temperature. With pin code security to change the settings. Specifications: Language can be set to English, German, Dutch, French, Italian or Polish. button to switch heat on/off. Button to switch ventilation on/off. burner failure indicator. reset button to reset a burner trip Overtime timer (1, 2 or 3 hours) time switch with weekly programme Automatic switching between summer/winter time. Day/night temperature monitoring with current room temperature shown on the display. Adjustment range from: 0 39 C per 1 C. Programme set is retained if there is a power failure. Security via a pin code used to amend the switching times, daytime temperature and night-time temperature. Internal room temperature sensor option to connect an external room temperature or black bulb sensor. Order code: Digital room thermostat, with no sensor, to switch an Infra on/off or control high/low based on room temperature. With pin code security to change the settings. Specifications: Language can be set to English, German, Dutch, French, Italian, Polish, Romanian and Latvian. button to switch heat on/off. option to switch the radiant heater manually or automatically 1, 2 or 3K high/low. burner failure indicator. reset button to reset a burner trip Overtime timer (1, 2 or 3 hours) time switch with weekly programme Automatic switching between summer/winter time. Day/night temperature monitoring with current room temperature shown on the display. Adjustment range from: 0 39 C per 1 C. Programme set is retained if there is a power failure. Security via a pin code used to amend the switching times, daytime temperature and night-time temperature. Option to activate external extraction using a contact. Can be used for: GS+ GC+ Can be used for: GC shop heater föhn on/off model Can be used for: Infra on/off and high/low model. Infra Mono on/off and high/low model. Infra HT Infra-line Accessories: external room temperature sensor Order code: Accessories: external room temperature sensor Order code: external black bulb sensor Order code: Accessories: external black bulb sensor Order code:

146 (Room) thermostats and time switches MARK PINTHERM+ OPTITHERM Order code: Order code: Digital room thermostat with internal room temperature sensor for on/off control of a GS+ air heater based on the room temperature. With pin code security to change the settings. The OptiTherm is a digital clock thermostat with internal room sensor with which 1 or more air heaters (type G(N)SD or G(N)CD), up to a maximum of 8, can be controlled on the basis of the room temperature by means of a bus system. Specifications: Language can be set to English, German, French, Dutch, Italian or Polish. Push-button for switching the heating mode on and off. Push-button for switching the ventilation mode on and off. Indicator lamp to indicate a burner malfunction. reset button to release a burner malfunction. Overtime timer push-button (1, 2 or 3 hours). time switch with weekly programme. Automatic summer/winter changeover. Day/night temperature monitoring with current room temperature shown on the display. Temperature setting range from 0 to 39 C per 1 C. set programme is retained if there is a power failure. Security via a pin code used to amend the switching times, daytime temperature and night-time temperature. Internal room temperature sensor with the option of connecting an external room temperature sensor. option of connecting multiple room temperature sensors for average value measurement. Specifications: Push-button for switching the heating mode on and off. Push-button for switching the fan of the air heater(s) on and off. led to indicate a malfunction along with notification on the display in the form of a failure code. reset button to release a burner malfunction. An annual clock with 20 program blocks, clock program Mon-Fri, Tues-Fri, Sat-Son, daily or every day. Exceptional days, 20 program blocks, programmable by date, switching to daytime, eco or night-time temperature. 4 different operating modes (day, eco, night, frost). An overtime timer for switching to a different operating mode outside the switching times. Overtime timer freely adjustable from 15 min to 24 hours switching to daytime, eco or night-time temperature. Pin code protection to protect settings such as temperature, clock program, etc. frost protection which automatically switches on the air heaters if the room temperature falls too far. Digital clock thermostat Connection: bus system (2-wire). switching differential: 1K. Dimensions: 129 x 129 x 20mm (lxwxh) weight: 188 grams. Protection class : IP30. Ambient temperature: 0-40 C. Temperature setting: 0 to 40 C per 0.5 C can be set Time display: 24 hours Summer/winter: adjustable automatic/off Languages can be set to Dutch, English, German or French external sensor: option of measuring the temperature per unit or on the basis of an average value. Can be used for: GS+ G+ Can be used for: G(N)SD G(N)CD Accessories: external room temperature sensor Order code: Accessories: external room sensor to be connected to the air heater. Order code Control equipment - 146

147 BASETHERM Order code: Water-proof room thermostat Order code: V room thermostat with 3-phase switch TA Order code: Digital room thermostat with internal room temperature sensor with which 1 or more air heaters (type G(N)SD or G(N)CD), up to a maximum of 8, can be controlled on the basis of the room temperature by means of a bus system. With the option of heating and ventilating as well as indicating and resetting any malfunctions. Water resistant (IP65) room thermostat with adjustable differential. Measures the temperature using a sensor filled with liquid connected to the thermostat with a capillary. Room thermostat for switching the ZDA based on room temperature or constantly on with a selector to switch the vent in 3 phases. Specifications: Push-button for switching the heating mode on and off. Push-button for switching the ventilation mode on and off. led to indicate a malfunction along with notification on the display in the form of a failure code. reset button to release a malfunction. Connection: bus system (2-wire). Switching differential: 1 C. Dimensions: 129 x 129 x 20mm (lxwxh) weight: 188 grams. Protection class: IP30. Ambient temperature: 0-40 C. Temperature setting: 0 to 39 C per 1 C can be set A maximum of 8 air heaters can be connected. Specifications: Bulb sensor filled with liquid. Adjustment range from C. Differential adjustable from 2 8K. Material protection class and resistant to splashing in accordance with IP65 Switching power 230V~, 15(8)A Specifications: equipped with internal room temperature sensor. Selector for vent setting 1, 2, 3. Device off selector/device on at room temperature/device constantly on. Required temperature adjustable from 5 30 C. Switch differential 0.5K. Switch contact max. 6A 230Vac. Dimensions 144 x 82 x 27mm. Protection class IP30, class II. Can be used for: G(N)SD G(N)CD Can be used for: tanner MDA tanner MDC tanner FBA 5-position controller 230V, see page 144 High/low/off controller, see page 145 Can be used for: ZDA MULTI 147

148 (Room) thermostats and time switches pipe thermostat Frost protection thermostat Digital time clock Order code: Thermostat to start a water-supplied air heater, for example, when the water is at the required temperature. Specifications: Temperature adjustable from C per 5 C. Protection class IP40. voltage free exchange contact. Switching power V~, 16(4)A, min. 150mA at 24V~. Ambient temperature C. Maximum sensor temperature 110 C Dimensions 38 x 48 x 103mm. Process connection using the 220mm metal butterfly clips supplied Order code: Thermostat to protect against the danger of frost. Equipped with a bulb sensor which is active over the entire length. Specifications: Adjustment range from C. switch differential 1K. Protection class IP40. voltage free exchange contact. Switching power V~, 15(8)A, min. 150mA at 24V~. Ambient temperature C. Dimensions 105 x 112 x 55mm. Colour grey (RAL 7035). Copper capillary. Capillary filled with Solkane R134a. Capillary active across the entire length. Capillary length 1.8m. Order code: Digital time switch to switch installations on and off or to control temperature reductions for the night or over the weekend. Specifications: simple to use 8 on/off cycles with 13 different day blocks, programmable by day or block of days. 4 different operating positions: manually on constantly, manually off constantly, adjustable countdown timer, automatic operation in accordance with timer switching programme. Integrated countdown timer. suitable for wall installation or installation on DIN rail. Manual on/off. rapid summer/winter time switching. Power reserve 72 hours. Dimensions 78.8 x 106 x 56mm. Protection degree IP20 in accordance with EN Operating voltage AC 230V %, 50/60Hz, 3.0VA. Relay contact Q AC24 240V, DC 24V, max. 6(3)A. Can be used for: tanner MDA tanner MDC tanner FBA 5-position controller 230V, see page 144 High/low/off controller, see page 145 Can be used for: tanner MDA tanner MDC tanner FBA 5-position controller 230V, see page 144 High/low/off controller, see page 145 Control equipment - 148

149 Controllers/switches MPVC controller Order code: Controller to convert the 0-10Vdc signal from a building management system to a modulating on/ off signal. G+ signal amplifier Order code: To amplify the 0-10Vdc control signal during operation of upwards of 3 GS+ or GC+ modulating air heaters using building management system Temperature regulator black bulb Order code: Electronic on/off temperature regulator for DIN rail installation. Specifications: 230Vac, 50/60Hz power supply. Motor rating c.a. 2.8VA. external sensor type NTC4. Temperature setting range from 0 60 C. Switch differential 0.5 5K adjustable Switch contact exchange contact, voltage free. Closing contact contact load 10(3)A, 250V. Normally closed contact load 5(1.5)A, 250V. equipped with LED indicator when contact switched in (relay). Protection class IP20. Ambient temperature Dimensions 36 x 86 x 62.5mm. Connecting terminals mm². External sensor Measurement range C Protection class IP30. Cables between regulator and sensor maximum 50m Dimensions 74 x 74 x 41.5mm. Can be used for: Rooftop GNC GC Can be used for: GS+ GC+ Can be used for: INFRA Accessories: Black bulb sensor

150 Controllers/switches RC control unit Order code: Remote control for the Airstream so that all parameters can be entered in a simple and userfriendly manner. Specifications: The hand-held terminal operates the unit via graphical displays. All temperatures, setpoints, clock times and alarm messages can be shown on the display. All menus and graphical displays contain only relevant information. Alarm messages that are activated by the system have the highest priority and are indicated by a flashing red LED. Alarm messages are always shown graphically at the top of the display. only authorised users can change the system parameters. Access to the control system can be granted for 3 different levels: User Installer Service Voltage 24 V DC, ±15%, Consumed current 45 ma Modbus RS-485, 115 kbaud Modbus connection 2 x RJ12 6/6 Max. cable length 50 m (in low EMC environment) Display Monochrome, 240 x 128 pixel, backlight Scroll wheel turn-and-push dial 24-steps leds 1 x green / 1 x red Push buttons Membrane keys,1 x ESC / 1 x? Ambient temperature 0 C /+50 C Air humidity 10-95% RV Dimensions 170 x 40 x 82 mm Modbus cable MPFK6S Density class IP20, ABS weight 15 g CO² sensor Order code: (wall installation) CO² sensor to optimise ventilation in the room with the MHR-G. Available for wall installation or integration into a duct. Specifications: Measurement range ppm. Output signal 0 10V. Power supply 24Vac, 50/60Hz; 24Vdc; 1,8W for wall sensor. Reaction time <2 mins. For wall sensor, 3 5 mins. Operating conditions 0 50 C % HR (without condensation) wall sensor. Wall sensor dimensions 130 x 65 x 36,5 mm. Can be used for: Airstream 5-position transformer regulator 230V Order code: 6A A A Regulator to regulate the speed of 1~230V voltage adjustable fan motors. Specifications: Option to connect several fans with the maximum connection current; Protection class IP54. selector to switch the fan to 6 positions, including off; Green operating lamp; option to connect a room and/or construction thermostat; Option to control and air valve for example via a co-switching contact (max 2A); Motor protection via thermo contacts (not for PTC thermister). The regulator switches off automatically in the case of overload. Can be used for: Tanner MDA (230V) Tanner FBA (230V) Extraction fan MDV (230V). Ecofan W42/W82 Ecofan W142 Ecofan P140 Ecofan ZW42/ZW82 Can be used for: Airstream Accessories: Transformer 230/24V IP20 Control equipment - 150

151 5-position transformer regulator 400V High/low/off regulator 400V GTM I Order code: 2A A IP21 7A IP21 Order code: 10A Order code: Supplied with the water-supplied EASYAIR. Regulator to regulate the speed of 3~400V voltage adjustable fan motors. Regulator to manually switch 3~400V fan motors in Y/ to high/low. 5-position regulator to control the hot water air curtain fan on the EASYAIR P model. Specifications: Option to connect several fans with the maximum connection current; Protection class IP54. selector to switch the fan to 6 positions, including off; Green operating lamp; option to connect a room and/or construction thermostat; Option to control an air valve for example via a co-switching contact (max 2A); Motor protection via thermo contacts (not for PTC thermister). The regulator switches off automatically in the case of overload. Specifications: Option to connect several fans with the maximum connection current; Protection class IP54; A selector to switch the fan to high, low and off; A green operating lamp; the option to connect a room and/or construction thermostat; The option to control an air valve for example via a co-switching contact (max 2A); Motor protection via thermo contacts (not for PTC thermister). The regulator switches off automatically in the case of overload. Specifications: Dimensions 120 x 70 x 25mm. Parallel switching of max. 12 air curtains possible. It is possible to connect an external contact for release. 5 position switch. summer/winter switch. It is possible to operate a solenoid valve or circulation pump (max. 2.5A) in the winter setting. settings are retained if the power fails. By using a dip switch, it is possible to leave solenoid valve open when the fans are off. 8-way cable (20 metres) incl. RJ-45 connectors supplied. Can be used for: Tanner MDA (400V) Tanner FBA (400V) Can be used for: Tanner MDA (400V) Tanner FBA (400V) Can be used for: easyair P model 151

152 GTM II GTM IE GTM IIE Order code: position regulator to control the hot water air curtain fan on the EASYAIR P model. Order code: is supplied with electrical EASYAIR Regulator for 5 position fan control and 3 position heating control of the EASYAIR E electric air curtain. Order code: Electronic regulator for 5 position fan control and 3 position heating control of the EASYAIR E electric air curtain. Specifications: Dimensions 120 x 70 x 25mm. Parallel switching of max. 12 air curtains possible. It is possible to connect an external contact for release. room thermostat connection possible Door contact connection possible frost protection indicator. Auto/manual/off switch. 5 position switch. summer/winter switch. It is possible to operate a solenoid valve or circulation pump (max. 2.5A) in the winter setting. settings are retained if the power fails. By using a dip switch, it is possible to leave solenoid valve open when the fans are off. Adjustable fan after-run time to 0, 60, 120, 180 secs. 8-way cable (20 metres) incl. RJ-45 connectors supplied. Specifications: Dimensions 120 x 70 x 25mm. Parallel switching of several air curtains not possible. It is possible to connect an external contact for release. 5 position fan switch. 3 position heater switch. room thermostat connection possible Adjustable fan after-run time to 0, 60, 120, 180 secs. settings are retained if the power fails. By using a dip switch, it is possible to leave solenoid valve open when the fans are off. 8-way cable (20 metres) incl. RJ-45 connectors supplied. Specifications: Dimensions 145 x 89 x 45mm. Parallel switching of several air curtains not possible. It is possible to connect an external contact for release. 5 position fan switch. 3 position heater switch. Manual automatic operating mode room thermostat connection possible Cable break indicator or shut-down sensor operating mode shown on display. Adjustable fan after-run time to 0, 60, 120, 180 secs. settings are retained if the power fails. 8-way cable (20 metres) incl. RJ-45 connectors supplied. external temperature sensor Siemens S867 (1000W / 25 C) sensor type. Current consumption approx. 8mA. Power supply 12Vdc +/ 10%. Can be used for: easyair P model Can be used for: easyair E model Can be used for: easyair E model Control equipment - 152

153 3-position selector MDC 230V W9-1 B W9-1 BR Order code: Order code: Order code: Selector to switch the fan on the MCB 230V to 3 positions. Switchbox for controlling 1 air heater with 100% external air supply on the basis of minimum inlet temperature monitoring. Specifications: Steel plate box with cylinder lock; dimensions of switchbox 300x400x150mm (hxwxd). temperature controller for monitoring the minimum inlet temperature. Selector 1/0/2 heating/off/ventilation. Indicator lamp for indicating filter malfunction. Illuminated reset button to indicate and reset a burner malfunction Control of the 230 V open/close servo motor with limit switch. Potential-free contact to operate the extraction unit (24Vmax). Potential-free contact, third-party supply, for the switching of the air heater by the extraction unit. Supplied separately: PT100 duct sensor. Switchbox for controlling 1 air heater with 100% external air supply on the basis of room temperature and minimum inlet temperature monitoring. Specifications: Steel plate box with cylinder lock; dimensions of switchbox 300x400x150mm (hxwxd). temperature controller for monitoring the room temperature. temperature controller for monitoring the minimum inlet temperature. Selector 1/0/2 heating/off/ventilation. Indicator lamp for indicating filter malfunction. Illuminated reset button to indicate and reset a burner malfunction Control of the 230 V open/close servo motor with limit switch. Potential-free contact to operate the extraction unit (24Vmax). Potential-free contact, third-party supply, for the switching of the air heater by the extraction unit. Supplied separately: PT100 duct sensor and room sensor. Can be used for: MCB 230V model In combination with MDC 230V motor control Order code: , see page 152 Can be used for: G(N)ST/RE G(N)CT/RE Can be used for: G(N)ST/RE G(N)CT/RE 153

154 Distribution boxes W9-1 BRL Order code: Switchbox for controlling 1 air heater with external air/recirculated air connection on the basis of room temperature and minimum inlet temperature monitoring. With the option of setting the external air pro portion by means of a position switch. W9 G+ Order code: Contact our sales department. Switchbox for modulating regulation of 1 or more modulating air heaters based on room temperature. F1 Order code: Switchbox for turning a Föhn on/off based on room temperature. Specifications: steel plate box with cylinder lock, dimensions of switchbox 500x400x200mm (hxwxd). Digital temperature controller for control on the basis of daytime and night-time room temperature and monitoring of the minimum inlet temperature. Digital time switch with weekly programme. Selector 1/0/2 heating/off/ventilation. Holiday switch to allow the air heater to function at the night-time temperature over longer periods. Indicator lamp for indicating filter malfunction. Illuminated reset button to indicate and reset a burner malfunction Control of the 24V modulating servo motor. Position switch to set the external air proportion during daytime operation. Potential-free contact to operate the extraction unit (24Vmax). Supplied separately: NI1000 duct sensor and room sensor. Adjustment: During the night, on/off on the basis of a reduced room temperature with 100% recirculated air. During the day, monitoring on the basis of the room temperature with minimum inlet temperature monitoring. The fan runs continuously with a proportion of external air. Specifications: steel box with cylinder lock One 230V power supply group per device with a switchbox for several devices. Digital time switch with weekly programme. Day and night temperature regulator. Holiday switch to operate devices at the night-time temperature over longer periods. Overtime timer adjustable from midnight to 6.00 a.m. Selector per device for heat / off / ventilate. Illuminated reset button per device to indicate and reset a burner trip A room temperature sensor supplied separately. Specifications: steel box with cylinder lock Digital time switch with weekly programme. regulator for day temperature. regulator for night temperature. Holiday switch to allow the device to operate at the night-time temperature over longer periods. Overtime timer from 0-6 hours. Selector for heat / off / ventilate. A room temperature sensor supplied separately. Can be used for: G(N)ST/RE G(N)CT/RE Can be used for: GS+ GC+ Can be used for: föhn on/off model Control equipment - 154

155 F2 Order code: F4 230V Order code: F6 24V Order code: Switchbox to switch a Föhn on/off based on room temperature, with the option to increase the daytime temperature temporarily using a timer. Switchbox to control a Föhn high/low model based on room temperature, with the option to switch the unit to low temporarily using a timer. Switchbox to control a Föhn high/low model based on room temperature, with the option to switch the unit to low temporarily using a digital timer. Specifications: steel box with cylinder lock Digital time switch with weekly programme. regulator for day temperature. regulator for night temperature. regulator for increased day temperature. Holiday switch to allow devices to operate at the night-time temperature over longer periods. Overtime timer from 0-6 hours. timer for temporarily increasing the day temperature for between 0-6 hours. Selector for heat / off / ventilate. A room temperature sensor supplied separately. Specifications: steel box with cylinder lock Digital time switch with weekly programme; regulator for day and night temperature. Holiday switch to enable devices to operate at the night-time temperature over longer periods. Digital timer to switch to the daytime mode temporarily outside the clock programme.. Digital timer to switch the device to low temporarily. Selector for heat / off / ventilate. Indicators for: high low burner in operation. burner failure. A room temperature sensor supplied separately. Specifications: steel box with cylinder lock Digital time switch with weekly programme. Day and night temperature regulator. Holiday switch to enable devices to operate at the night-time temperature over longer periods. Digital timer to switch to the daytime mode temporarily outside the clock programme.. Digital timer to switch the device to low temporarily. Selector for heat / off / ventilate. Indicators for: high low burner in operation. burner failure. A room temperature sensor supplied separately. Can be used for: föhn on/off model Can be used for: föhn high/low model Can be used for: föhn high/low model 155

156 F7 Order code: Switchbox to control a Föhn high/low model based on room temperature, with an additional control to restrict the temperature gradient. And the option to temporarily switch the device to low using a digital timer. C10 Order code: Switchbox for controlling a calflo with on/off fan based on room temperature with minimum inlet temperature restriction. C12 Order code: Switchbox for controlling a calflo with on/off fan based on room temperature with minimum inlet temperature restriction. The temperature gradient means that the heater starts on maximum, and heats at full power for 30 minutes with heating of 45K. If after 30 minutes the air drawn in is <12 C, the heater continues to heat on maximum. If the temperature of the air drawn in is >12 C, the heater operates on minimum, heating at 30K. Specifications: steel box with cylinder lock Digital time switch with weekly programme. Day and night temperature regulator. A regulator to restrict the temperature gradient. Holiday switch to enable devices to operate at the night-time temperature over longer periods. Digital timer to switch to the daytime mode temporarily outside the clock programme.. Digital timer to switch the device to low temporarily. Selector for heat / off / ventilate. Indicators for: high low burner in operation. burner failure. A room temperature sensor supplied separately. Can be used for: föhn high/low model Specifications: steel box with cylinder lock regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal. Selector for heat/off/ventilate. failure lamps for: burner failure. I ntake air failure b urner fan thermally off Maximum failure Dirty filter operating lamps for: burner on burner in operation release of control reset button to reset a burner failure. voltage free contact to operate extraction (24Vmax). voltage free contact (supply to third parties) to check whether extraction is operating. A room temperature sensor supplied separately. A duct temperature sensor supplied separately for the minimum inlet temperature restiction. Can be used for: Calflo on/off model Specifications: steel box with cylinder lock regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal. Selector for heat / off / ventilate. Digital time switch with weekly programme. Holiday switch to allow devices to operate at the night-time temperature over longer periods. Overtime timer adjustable from midnight to 6.00 a.m. failure lamps for: burner failure I ntake air failure burner fan thermally off Maximum/gas pressure failure; Dirty filter failure; operating lamps for: burner on burner in operation supply fan on release control reset button to reset a burner failure. voltage free contact to operate extraction (24Vmax). voltage free contact (supply to third parties) to check whether extraction is operating. A room temperature sensor supplied separately. A duct temperature sensor supplied separately for the minimum inlet temperature restiction. Can be used for: Calflo on/off model Control equipment - 156

157 C20 Order code: Switchbox for controlling a calflo with high/low fan based on room temperature with minimum inlet temperature restriction. Specifications: steel box with cylinder lock regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal. Selector for heat / off / ventilate. High/low selector supply fan selector. failure lamps for: burner failure I ntake air failure b urner fan thermally off Maximum/gas pressure failure Dirty filter operating lamps for: burner on burner in operation supply fan low supply fan high release control. reset button to reset a burner failure. voltage free contact to start extraction (24V max). voltage free contact to switch extraction to high (24V max). voltage free contact (supply to third parties) to check whether extraction is operating at low. voltage free contact (supply to third parties) to check whether extraction is operating at high. A room temperature sensor supplied separately. A duct temperature sensor supplied separately for the minimum inlet temperature restiction. C22 Order code: Switchbox for controlling a calflo with high/low fan based on room temperature with minimum inlet temperature restriction. With day/night temperature monitoring Specifications: steel box with cylinder lock regulator for the room temperature and minimum inlet temperature restriction using 2-10Vdc control signal. Selector for heat / off / ventilate. High/low selector supply fan selector. Digital time switch with weekly programme; A holiday switch to allow the device to be operated at the night-time temperature over longer periods. A digital timer (0-6 hours) to switch to the daytime mode temporarily outside the clock programme.. failure lamps to indicate: A burner failure; A supply air pressure failure; A burner fan thermally off failure A maximum/gas pressure failure; A dirty filter failure; operating lamps to indicate: burner on burner on supply fan low supply fan high release control. reset button to reset a burner failure. voltage free contact to start extraction (24V max). voltage free contact to switch extraction to high (24V max). voltage free contact (supply to third parties) to check whether extraction is operating at low. voltage free contact (supply to third parties) to check whether extraction is operating at high. A room temperature sensor supplied separately. A duct temperature sensor supplied separately for the minimum inlet temperature restiction. SCR on/off Order code: Switchbox for turning 1 or more Infras on/off based on room temperature, with day/night temperature setting. Specifications: steel box with cylinder lock Digital time switch with weekly programme; Day and night temperature control. Holiday switch to allow the device to operate at the night temperature over longer periods. Overtime timer from 0-6 hours Infra selector per device for on/off. Burner failure indicator per device. reset burner failure by switching the on/off infra selector off and then back on. A black bulb temperature sensor supplied separately. Can be used for: Calflo high/low model Can be used for: Calflo high/low model Can be used for: Infra on/off model 157

158 SCR high/low Order code: SLR on/off Order code: MDC 230V motor control upto 3.0kW Order code: Switchbox for on/off and automatic high/low control of 1 or more Infras based on room temperature, with day/night temperature setting. Specifications: steel box with cylinder lock Digital time switch with weekly programme; Day and night temperature control. A control to automatically switch the infra to high/low based on the temperature; Holiday switch to allow the device to operate at the night-time temperature over longer periods. Overtime timer from 0-6 hours Infra selector per device for on/off. Burner failure indicator per device. reset burner failure by switching the on/off infra selector off and then back on. A black bulb temperature sensor supplied separately. Switchbox for turning 1 or more Infra Lines on/ off based on room temperature, with day/night temperature setting. Specifications: steel box with cylinder lock 230V supply group per device. Digital time switch with weekly programme. Day and night temperature control. Holiday switch to allow devices to operate at the night-time temperature over longer periods. Overtime timer from 0-6 hours Infra line on/off selector per device. Illuminated reset button per device to indicate and reset a burner trip A black bulb temperature sensor supplied separately. To be able to switch the 1~230V fan on the MDC. Plus the option to connect an external room thermostat and a 3-position selector for the fan. Specifications: steel box solenoid switch to control the fan. Connecting terminals for external room thermostat Connecting terminals for external 3-position selector. Can be used for: Infra high/low model Can be used for: Infra-Line on/off model Can be used for: MDC 230V model Control equipment - 158

159 MDC 400V motor control Order code: 1.1kW kW kW kW To control the 3~400V fan on the MDC. Plus the option to connect an external room thermostat. Specifications: Steel box; Solenoid switch to control the fan; Connecting terminals for an external room thermostat; Can be used for: MDC 400V model 159

160 supply air system Supply air systems on request 160

161 Expert advice and supply direct from the factory With our own factories and our own sales and consultancy organisation Mark gives you a double benefit. Our consultants are happy to help you to deal with problem as efficiently as possible. In brief: greater efficiency and lower costs. Temperature and service guarantee Mark s guaranteed system fits together more cleverly than that of all other suppliers. It is precisely tailored to the wishes of the customer. After all, you don t want a climate management system, you want your property to have a certain temperature and air quality. And this is what Mark guarantees. Do you want to get to know us? We can specify the best solution for your climate management needs in a no-obligation consultation. We would be happy to visit your project to do this. The Mark consultants can perform an energy analysis or a calculation of transmission losses to show precisely which system is most applicable to your project. We guarantee that our advice will lead to the desired temperature in your building. This is the certainty that Mark provides. Furthermore, we offer you a product and service guarantee in the Netherlands and Belgium. This means that if one of your systems fails, an engineer will arrive as quickly as possible to solve the problem. We guarantee that your systems will work properly. Wide-ranging advice Our consultants have an in-depth knowledge of our complete product range and the associated technologies, whether for air heating, radiant heat systems, ventilation or air conditioning. They are also familiar with the latest developments in these fields. From climate control equipment installed on the roof to attractively finished strip ceilings that provide heating. And from powerful extractor units to air-conditioning units with heat recovery. The Mark consultants love taking the trouble to search for the best solution. Mark has thus proven itself as a reliable partner for more than half a century. For consultants, installers and end users. In addition to providing free advice, Mark supports the installers with quick delivery. All original components and control equipment are available in the web shop. Most components can be supplied quickly from stock. Mark Eire BV, part of Mark BV based in Veendam, serves, together with branches in Germany, Belgium, Poland and Romania, the whole of Europe.

162 CLIMATE TECHNOLOGY feels better, works better. MARK EIRE BV Coolea Macroom Co. Cork (Ireland) T: E: I: +353 (0) EI