HC8301. Lossnay. Models: LGH-150RVXT-E LGH-200RVXT-E LGH-250RVXT-E. Operating Instructions

Transcription

1 HC8301 Models: LGH-150RVXT-E LGH-200RVXT-E LGH-250RVXT-E Operating Instructions

2 Energy Recovery Ventilator MODELS: LGH-150RVXT-E LGH-200RVXT-E LGH-250RVXT-E Operating Instructions (For the user) English Please read this manual carefully before use for proper and safe use. Do not attempt to install the product by yourself. Safety precautions The following signs indicate that death or serious injury may be caused by failure to heed the precautions described below. WARNING Prohibited Do not disassemble Do not wet Do not touch Prohibited has leaked. released from electric contractor.) Open windows to ventilate. and outlet while the product is operating. (Failure to heed this warning may result in injury.) (It could cause an accident as a result of incomplete combustion.) Do not operate with the BY-PASS when heating (Condensed water may drip from the unit and wet the surface of ceiling.) Do not use at a place where exposed to high are generated. (It could malfunction.) Wet hands prohibited The instructions given must be followed. The instructions given must be followed. Do not operate with wet hands. Make sure the power supply isolator is turned off panel and consult your dealer. (Continuing operation under such conditions could (It could cause injury if parts fall.) (It could cause injury.) Make sure the power supply isolator is turned off a result of deteriorated insulation.) (including children) with reduced physical sensory supervision or instruction concerning use of the do not play with the appliance. supervision or instruction concerning use of the involved. Children shall not play with the appliance. Eng-1

3 Maintenance cover Air supply fan (outside) Air supply fan (inside) Hinge wire Damper plate Hinge wire Damper plate core LGH-150RVXT-E: 2 pieces OA: Outdoor air RA: Return air Operation remote controller (PZ-61DR-E). <Not connected to an external device> Operation Function Remote Controller (Optional parts) (PZ-61DR-E) Run using the remote controller. controller to be used has priority. (Last Command) <Connected to an external device> Power device Remote Controller (Optional parts) (PZ-61DR-E) connected the On/Off it will also control the operation. operate it by the remote controller. The fan speed is on Fan speed 3 or Fan speed 4. The ventilation mode is Auto Ventilation Mode. button button button Function buttons button Eng-2 F1 F2 F3 F4

4 Operation (continued) AUTOMATIC VENTILATION setting The automatic ventilation mode automatically provides the correct ventilation for the conditions in the room. The following shows the effect By-pass ventilation will have under various conditions. 1. Reduces cooling load If the air outside is cooler than the air inside the building during ventilation will draw in the cooler outside air and reduce the cooling load on the system. 2. Night purge By-pass ventilation can be used to release hot air from inside the building that has accumulated in buildings a business district during the hot summer season. cool rooms where the temperature has risen due to the use of English Maintenance intervals in order to prevent a deterioration in the functions. (or when are indicated on the remote controller) Clean the cores once two year. (Clean the cores once a year if possible.) 1) Maintenance cover 3. Open hinge wire. Maintenance cover Model LGH-150RVXT-E 2 4 LGH-200RVXT-E 3 4 LGH-250RVXT-E 3 4 core Hinge wire Cleaning the parts Use a vacuum cleaner to remove light dust. To remove stubborn Vacuum cleaner Main unit 2. Hold the handle and draw the cores out from the main unit. core 2) cores surfaces of the cores. Do NOT wash in water. Vacuum cleaner (with brush attachment) core in water. Eng-3

5 Maintenance (continued) the sequence for their removal in reverse. core core core Note: 290 If 250 Unit: mm Model name Running current (A) Input power (W) Air volume (m3 /h) (Pa) (Pa) Enthalpy Temperature Heating Cooling LGH-150RVXT-E LGH-200RVXT-E LGH-250RVXT-E * The above values apply during ventilation when the fan speed is set to Fan speed 4 at the rating pressure loss and 230 V / 50 Hz. * functions. * length more than 10D (D=duct diameter or equivalent) from the source of turbulence is recommended for correct measurement. On-site buildings AG3/89.3(2001)) (db) Weight - Motor - Printed circuit board - core (Around 10 years with maintenance at stated periods.) After-sales servicing Consult with your dealer about the after-sales services provided for this product. Attentive inspection Inspect your unit of good service! Have you noticed? (Motors are component which requires maintenance.) contact your dealer for Stop prevention of failure or running. hazard. The dealer should appraise the possible cost.

6 Manufactured by: MITSUBISHI ELECTRIC CORPORATION TOKYO BLDG , MARUNOUCHI, CHIYODA-KU, TOKYO, JAPAN Importer in EU: MITSUBISHI ELECTRIC EUROPE B.V. HARMAN HOUSE, 1 GEORGE STREET, UXBRIDGE, MIDDLESEX, UB8 1QQ, U.K.