TEVHR. Heat Recovery Ventilator

Transcription

1 TEVHR Heat Recovery Ventilator

2 Contents Teknogen Who we are, what we do? TEVHR... 1 Unit Specifications... 2 Performance Data... 3 Technical Specification... 5 Components... 6 Dimensions... 7 Duct Connection Configuration... 7 Accessories... 8 TEKNOGEN, a trademark of BY HVAC SYSYEM INC. has been operating since 2011 in selling of products that have been manufactured with superior quality and service mentality. Teknogen product range covers air handling units, fancoil units, hygienic air handling units, swimming pool air handling units, unit heaters, floor convectors, rooftop package units and heat recovery units. National and international standards are considered during manufacturing. Proper and high-end components are used throughout all manufacturing processes to ensure that performance of all units are measurable and standards are met. Therefore we cooperate with leading component manufacturers in order to observe innovations and to introduce these developments to our production. Heating, Ventilating and Air Conditioning (HVAC) sector has been growing significantly in recent years and energy efficiency has become prominent due to the developments in construction technology. As Teknogen, we are manufacturing devices with high energy efficiency and make them available to be used in buildings with low energy consumption. If you are looking for high quality production and a solution partner, we Teknogen are ready.

3 TEVHR Recent studies point out that people in developed countries spend 70% of their lives indoors. For this very reason enhancing indoor air quality is essential for human health. On the other hand, increasing demands on energy efficiency and the fact that world s energy resources are limited necessitate the energy consumption to be more efficient. TEKNOGEN heat recovery units are designed to run trouble-free for years and to satisfy both energy economy and indoor air quality needs. Devices are of 8 different models with capacities ranging between 800 m3/h and 6500 m3/h and they operate by extracting energy from the exhausted dirty air from indoors and passing it to the fresh air from the outside. Components with the latest technology are used in devices and electrical and thermal energy efficiencies are prioritized. Eurovent-certified heat recovery recuperators and highly efficient plug fans consuming less energy and operating in low noise levels are used in the units. Fans are backward bladed with a design of superior aerodynamic efficiency. Remote control with speed adjustment key provided with the units allows the flow rate to be set in infinite levels and to turn the devices on/off. Functions TEVHR units; Supply fresh air for indoors. Extract stale indoor air. Filter supply air. Transfer heat energy from indoor air to the supply air stream. Advantages High thermal efficiency thanks to the Eurovent certified heat recovery recuperators. Backward bladed plug fans with high efficiency and low noise levels. Flexibility in installation due to alternative duct connections. Easy maintenance for all components without the need of disassembly. Non-flammable thermal and sound isolation material. Stepless control panel and on/off function. Why Teknogen Heat Recovery Unit Delivery from stock for all models (models with electric heaters included) Highly efficient backward bladed plug fans of EBM brand for low power consumption. Eurovent-certified aluminum recuperator of Klingenburg brand for high thermal efficiency. Low noise levels. G4 class filter. Optional smart-automation solutions. Stepless speed control. 9 different models with capacities ranging between 800 m 3 /h and 6500 m 3 /h Easy installation for electric heaters. Optional water-heater coil. TSEK and CE certificates. 1

4 Unit Specifications High thermal efficiency with Eurovent-certified heat recovery recuperators All recuperators used in TEVHR units are Eurovent-certified and their performances are inspected and approved by independent test organizations. Recuperators superior plate geometry allows less pressure drop compared to others thereby saving more energy and they reduce heating/cooling needs thanks to their high efficiency. Highly efficient backward bladed plug fans with low noise levels Backward bladed plug fans with superior aerodynamic efficiency are used in TEVHR units. Along with low sound levels, fans have high efficiency on the whole fan operation curve. Flexibility in installation due to alternative duct connections 2 additional duct connections are available in TEVHR units to provide solutions to different duct connection configurations. Connection directions of the unit can be changed by using one or both of these alternative duct connections. Easy maintenance for all components without the need of disassembly All components used in TEVHR units are detachable without needing the unit to be dissembled. The filters, fans and the recuperator of the unit are designed to be detached and maintained easily in ceiling floor with service doors. Non-flammable thermal and sound isolation material Flame retarding polyurethane foam is used in TEVHR units to provide thermal and sound insulation. Thanks to the flame retarding characteristic of the material, flame conductivity is reduced to minimum and the unit has become compatible with international standards. Stepless control panel and on/ off function In TEVHR units remote control with speed adjustment key is standard. By the remote control panel, flow rate can be set in infinite levels and the unit can be turned on or off. Panel has a LED screen that shows the unit s operating condition. 2

5 Performance Data TEVHR 800 / AIR PERFORMANCE TEVHR 1000 / AIR PERFORMANCE 500 % % TEVHR 1500 / AIR PERFORMANCE TEVHR 2000 / AIR PERFORMANCE 500 % %

6 Performance Data TEVHR 2500 / AIR PERFORMANCE TEVHR 3000 / AIR PERFORMANCE 1000 % % TEVHR 4000 / AIR PERFORMANCE TEVHR 5000 / AIR PERFORMANCE 500 % %

7 Performance Data TEVHR 6500 / AIR PERFORMANCE 500 % Technical Specification TEVHR Power Supply 1~230 V 50 Hz 3~380 V 50 Hz Working Range - 12 C ~ 46 C Performance Data Air Flow Rate ( 1 ) m 3 /h Sound Level ( 2 ) db (A) Electrical Data Fan Motor Power W Max. Current (A) 1,0 1,45 2,0 3,0 4,8 4,0 5,1 6,4 3,6 General Data Duct Connection Dimensions mm 200 x x x x x x x x x It is measured when external static pressure is 0 Pa. 2 Sound level data are measured at 250 Hz and 1.5 m away from the unit s bottom. 5

8 Components Heat Recovery Recuperator Long-lasting recuperator with aluminum plates High heat transfer efficiency Low pressure drop Eurovent certificate Easy detachment and maintenance via service cover Washability EA Exhaust Air OA Outdoor Air SA Supply Air RA Return Air Plug Fan Backward blades with high aerodynamic efficiency Flexible connection with monophase structure Low power consumption Low sound level Protection against overheating Easy detachment and maintenance with service door and quick connector Compatibility with international quality and performance standards Filters G4 class according to EN 779 Cleanable Leakproof slide design Unit Casing Steel casing with their corrosion resistance enhanced by RAL 9002 Easy access to all components with service doors Easy service Nonflammable sound and thermal isolation Simplified assembly Speed adjustment key Airflow rate control of supply and exhaust fans Minimum flow rate setting On/off function Compact design Operation indicator light 6

9 Dimensions Model Dimensions D L C A B Weight mm kg TEVHR Duct Connection Configuration Alternative Alternative RIGHT HAND SIDE INSTALLATION (Exhaust Air or Fresh Air) (Exhaust Air or Fresh Air) Air Inlet (Return Air or Outside Air) Air Inlet (Return Air or Outside Air) LEFT HAND SIDE INSTALLATION (Exhaust Air or Fresh Air) Air Inlet (Return Air or Outside Air) Air Inlet (Return Air or Outside Air) (Exhaust Air or Fresh Air) Alternate Alternate 7

10 Accessories Automation Panel Room control panel provided with the unit is put into the door that unit will be conditioning and necessary connections are made according to the assembly guide. It can set flow rates of supply and exhaust air streams separately (L/M/H). The user can alter the fan speeds according to his or her preferences. Winter/summer operation can be chosen on the panel. In summer operation, only the recuperator is enabled whereas in winter operation the electric heater is enabled along the recuperator. According to the temperature set, electric heater automatically turns on and off in winter operation. With the Off button on the remote control, both electric heater and recuperator can be turned off. Unit control panel is located on the unit and makes the device operate according to the set values on remote control. Necessary equipment that is necessary for operation of recuperator and electric heater such as contactor, relay, electric terminal, capacitor etc. are located on the switch box. For electric heater and recuperator to work it is sufficient to make the electrical connection to the box and to pull power cables to the electric heater. There is also a ventilation on demand (VOD) feature available by means of optional CO 2 or Indoor Air Quality sensors designed to work with automation panel. Electric Heater To increase the temperature of the supply air Circular / Rectangular geometry Galvanized / Stainless casing Resistant Model Power Number of Step A B C HxL Power Custom kw mm W x x x x x x x x x B H TEVHR A L C 8

11 Accessories Hot water Coil Teknogen hot water coils are used for after heating purposes with TEVHR units. Coil are designed for 90 C water inlet and 70 C water outlet to the coil. Coils are made of Copper tubes and Aluminum fins. With Teknogen control panel it is possible to control the coil capacity on/off according to the user set temperature in the room control panel. Teknogen hot water coils are designed with rectangular duct connection for low pressure drop eliminating the need for an adaptor. Capacity Nominal Air Flow Dimensions A B C D E kcal/h m 3 /h mm W Capacities are given for air inlet of 18 C and 50 % RH and hot water inlet of 90 C and outlet of 70 C APRIL 2014 BY HVAC SYSTEMS INC. reserves the right to make alterations due to technical developments without prior notice. 9

12 BY HVAC SYSTEMS INC. Atatürk Mah. Dudullu Cad. Şeref sk. No 46 Ataşehir - İstanbul / TR Tel Fax info@teknogenhvac.com