Medium main line filter

Size: px

Start display at page:

Download "Medium main line filter"

Stella Blake
5 years ago
Views:

1 AF000 (oil free) Components preparation and pressure adjustment / main line unit / air Overview High performance main line with stainless steel housing for clean environments. Perfect for oil-free air lines. Features () Differential pressure gauge mounting port provided A differential pressure gauge (option) mounting port is provided on the top of the. () Easy element replacement A band method has been adopted for tightening the housing. The element can be replaced without tools. () Time manage element replacement Thee replacement time is managed by time (approx. one year). The replacement timing is indicated by a flashing light. () Housing drop prevention mechanism A mechanism prevents the housing from dropping when the hand cover is removed for replacing the element, etc. () Highly reliable drain separator mounted A highly reliable snap drain is provided for the drain separator. Drainage can be discharged without wasteful air loss. CONTENTS Product introduction 7 Safety precautions 7 Medium pre- (AF000P) 78 Medium solid removing (AF000S) 78 Medium oil mist (F000M) 78 Medium deodorizing (AF000X) 78 device recommended configuration 0 nic sensor Pressure 7

Supporting oil-free air lines High-performance main line AF000Series The high-performance main line AF000 Series with stainless steel housing supports clean environments.

0mg/m * Normal pressure loss value is reduced S type element structure * Removes particles μm or larger in size Differential gauge mounting port A mounting port for the differential pressure gauge

2 Supporting oil-free air lines High-performance main line AF000Series The high-performance main line AF000 Series with stainless steel housing supports clean environments. This is perfect for oil-free air lines. M type element structure * Removes particles 0.0μm or larger in size * Outlet oil concentration 0.0mg/m * Normal pressure loss value is reduced S type element structure * Removes particles μm or larger in size Differential gauge mounting port A mounting port for the differential pressure gauge (option) is provided on the top of the. Preventing accidents With residual pressure warning function A band cover is provided as a standard to prevent unintentional removal of the band during operation or when there is a residual pressure. When the band cover s fixing screw is loosened, a small amount of air is leaked to notify the operator. Inner screen Glass fiber paper layer Outer screen Plastic form Inner screen Glass fiber paper layer Outer screen nic sensor Pressure Easy element replacement A band method is used to tighten the housing. There s no need to use tools when replacing the element. Time-controlled element replacement timing The conventional differential pressure method supported the fluid type oil mist for which it was difficult to determine the replacement timing. The replacement timing is now controlled by time (approx. one year). A lamp flashes to alert the operator when the replacement timing arrives. Housing drop-prevention mechanism A mechanism is provided to prevent the housing from dropping when the band cover is removed for maintenance, such as when replacing the element. The housing can be removed and mounted with both hands. Highly reliable drain separator A highly reliable snap drain (DT Series) is mounted on the drain separator. Discharge drain without wasteful air loss.. The waterproof and oil-proof glass fiber paper captures and condenses oil mist and reduced the pressure loss value.. The pleat structure ensures a wide filtration area.. Polyvinyl chloride resin has been eliminated in view of the global environment. AF000 Series Water drop removal Solid particle removal For air dryer pre- * Removes particles μm or larger * Water drop separation rate 99% Oil mist removal Solid particle removal Protect your expensive air compressor * Removes particles μm or larger. The standard glass fiber filtration paper improves the catching performance and water resistance.. The pleat structure ensures a wide filtration area.. A stable catching performance is realized even if there are water drops in the air. High-performance removal of oil mist High-performance removal of solids Suitable for pressure circuits which are susceptible to oil * Removes particles 0.0μm or larger * Secondary oil concentration Removes oil up to 0.0mg/m (at 0 C) Oil vapor removal Odor removal Suitable for pressure circuits which are susceptible to odors * Absorption with active carbon fibers * Secondary oil concentration Remove vaporous oil mist and odors up to 0.00mg/m (at 0 C) nic sensor Pressure PType SType MType XType 7 7

3 nic sensor Pneumatic components (main line ) Safety precautions Always read this section before starting use. Refer to Intro 7 for general precautions. AF000 Series. WARNING The manufacturer cannot be held liable in the following cases: Serious errors in use occur due to the operator. Illegal modifications or repairs using nonstandard parts by user. WARNING Do not use for applications other than compressed air. This product must not be used for medical devices for caisson shields or breathing devices. There is a risk of personal injury. Do not mount and use this device onto transportation equipment such as vehicles or ships. The internal devices could be damaged by vibration, etc. Avoid direct sunlight and rain water. The resin parts, etc., could deteriorate and break. Avoid use in the area containing corrosive gas. Use this product within the range of working temperature. Do not use the product where it could freeze.the accumulated drainage could freeze and damage the product. Do not use in dangerous places (atmosphere with risk of explosions, etc.). Manufacturer's Liability Design & Selection The inlet temperature should be kept as low as possible. The oil removing rate will drop if the temperature is high. Do not use this product in an ozone generating environment. Avoid using this product where vibration and impact are present. Do not use this product in areas containing dust, etc. Pressure CAUTION Do not step onto this product. When piping, remove cutting oil and rust proof oil, etc. Secure enough space for maintenance and inspection. Do not mount directly after a valve which opens/ closes suddenly. Do not install in a where a back flow could occur, or where the product could be subject to impact. Do not install this in a where a reverse flow could occur or where impact could be applied easily. Flash the drain piping before installing to remove any foreign matter from inside. Use an inner diameter ø.7 to.0 pipe within m long for the P, S or M type drain separator piping. Avoid laying the pipe with an upward slope. Drainage is discharged with pressure, so securely fix the piping at the drain port so that drainage does not splatter. Installation & Adjustment When mounting a differential pressure gauge on the P, S or M type, check the high pressure side and low pressure side ports, and mount properly. Mount the bowl vertically facing downward. Failure to do so could cause drainage discharge faults. Ensure that the product s weight can be sufficiently withstood when installing. Fix the inlet and outlet piping to the floor or ceiling with a holder or supporter, etc. When connecting pipes, make sure that the front and back pipes are straight. Do not apply excessive force on the connected pipes. Excessive force could deform or damage the connection port threads or the joint. 7

4 CAUTION The air has reached its life when the pressure drops or it has reached the service life (8000 hours or one year). Change the element when the life span is reached. Replace the element with a new part when it has reached its life. When using an element life indicator, replace the indicator battery with a new one when replacing the element. (Replace the X type when the service life is reached, or when the deodorizing effect is lost.) The M type is equipped with an element life indicator as a standard, so the element s service During Use & Maintenance Chemical resistance of drain separator s plastic bowl. Types of chemicals Category of chemicals Main products of chemicals General usage examples Polycarbonate Nylon Acid Inorganic compound Organic compound Sudden pressurization Alkaline Inorganic salt Aromatic hydrocarbon Chlorinated aliphatic hydrocarbons Chlorinated aromatic hydrocarbons Petroleum components Alcohol Phenol Ether Ketone Reverse Hydrochloric acid, sulfuric acid, fluorine, phosphoric acid, chromic acid, etc. Caustic soda, caustic potash, calcium hydroxide, aqueous ammonia,sodium carbonate, etc. Sodium sulfide, nitric acid potash, potassium bichromate, sodium sulfide, etc. Benzene, toluene, xylene, ethyl benzen, stylene, etc. Methyl chloride, ethylene chloride, methylene chloride, acethlene chloride, chloroform, trichlene, perchlene, carbon tetrachloride Chlorobenzene, dichlorobenzene, benzene hexachloride (B/H/C), etc. Solvent, naphtha, gasoline Methyl alcohol, ethyl alcohol, cyclohexanol, benzyl alcohol Carbolic acid, cresol, naphthol, etc. Methyl ether, methyl ethyl ether, ethyl ether Acetone, methyl ethyl keton, cyclohexanone, acetophenone, etc. life can be seen in a glance. Do not flow air in reverse. Do not pressurize suddenly. Otherwise, original performance may not be attained. Confirm that no pressure is applied before removing the band. The drain separator is a normal open type. The applicable compressor capacity is 0.7kW and over (discharge flow rate 90/min. and over). Close the stop valve and release the air in the drain separator s bowl before servicing the drain separator for a drain fault, etc. Wash the drain unit with water, and then remove all moisture with an air gun. Use a household neutral detergent to wash the bowl, and then rinse with water. The drain separator s bowl is made of polycarbonate. Avoid using the following chemicals or using the product in an atmosphere containing these chemicals. Acid washing of metals, acidic degreasing solution, film treatment liquid, film treatment liquid Alkaline degreasing of metals Contained in paint thinner (benzene, toluene, xylene) Organic solvent-based washing solution for metals (trichlene, perchlene, carbon tetrachloride, etc.) Agricultural chemicals Anti-freeze Liquid disinfectant Brake fluid additive nic sensor Pressure Carboxylic acid Phosphate ester Oxyacid Nitro compound Amine Formic acid, acetic acid, butyl acid, acrylic acid, oxalic acid, phthalic acid, etc. Dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP), dioctyl phthalate (DOP) Glycocholic acid, lactic acid, malic acid, citric acid, tartrate Nitro methane, nitro ethane, nitro ethylene, nitro benzene, etc. Methylamine, diethylamine, ethylamine, aniline, acetoanilide, etc. Dyes; oxalic acid for aluminum processing, phthalic acid for paint base Lubricant, synthetic hydraulic fluid, rust-preventing agent, additive plasticizer for synthetic resin Brake fluid additive Nitrile Acetnitrile, achrylonitrile, benznitrile, acetoylidyne nitrile, etc. Raw material for nitryl rubber : Available x : Not available 77

5 nic sensor Pressure Specifications Descriptions Treating air flow rate m /min. (ANR) Working fluid Working pressure range MPa Ambient temperature range C Withstanding pressure MPa Port size Rc Product weight kg Element life indicator Automatic drain Drain outlet diameter Series name is indicated in *. Descriptions Inlet air pressure MPa Inlet air temperature C processing conditions Inlet air dew point C Inlet oil concentration mg/m Filtration rating μm Secondary side oil concentration mg/m Water separation efficiency % Pressure drop Initial MPa Element Pressure drop MPa replacement time Service life Performance Medium main line stainless steel AF000P/S/M/X Series Suitable for pre-, oil removal and deodorizing applications. Treating air flow rate:.7 to 8.8m /min. (ANR) (0.7MPa) JIS symbol AF00*-.7 P type AF007*-0 AF00*-0. 0 Compressed air 0. to.0 to 0. /..7 Standard only for M type DT000--W (excluding X type) AF0*-0 Inner diameter ø.7 to ø nylon tube direct connection (excluding X type). S type M type X type 0.7 With no water infiltration or generation Pressure dew point 0 C Absorbed with active carbon fibers hours or one year Note : Treating air flow rate is the atmospheric pressure conversion value where inlet pressure is 0.7MPa. Note. ANR shows conditions where 0 C atmospheric pressure and relative humidity %. Note : The secondary side oil concentration is the value when the inlet air temperature is 0 C. Note : The drain separator is a NO type. The drain separator is air purged with the initially generated drainage until the pressure rises to 0.MPa. Note : The P/S/M type element must be replaced when the pressure drops or the service life is reached, whichever is earlier. Note : Replace the X type when the service life is reached or when the deodorizing effect is lost. Note 7: P type is not available in AF00. How to order AF 00 P GA Model no. A Flow rate code B Element type C Port size D Attachment Symbol A B P S M X C 0 0 D GA EL Port size Descriptions.7m /min. (ANR).m /min. (ANR) 0m /min. (ANR) m /min. (ANR) 8.8m /min. (ANR) (S, M or X only) Element type P type (solid, water removing ) S type (solid removing ) M type (oil mist removing ) X type (deodorizing ) Port size Rc Rc / Rc Attachment Differential pressure gauge (GA00-8-PO) enclosed Element life indicator enclosed AF00* Precautions for selection The required performance may not be attained if using at a level less than the selected pressure. Always select the model with the working pressure. Flow rate compensation coefficient Pressure (MPa) Auxiliary coefficient If the inlet pressure is not 0.7Mpa, multiply the coefficient above with the treating air flow rate. 78

6 AF000 Series Internal structure and parts list Internal structure and parts list P, S, M type Parts list No. Part name Material Guard Bowl Band Element Band cover Element life indicator Nipple Ball valve Automatic drain SUS0 SUS0 SUS0 NBR NBR Polyamide SUS0 C77, PTFE, SUS, etc. DT000--W Automatic drain and ball valve are attached. The element life indicator is mounted only on the M type. X type nic sensor Pressure 7 Parts list No. Part name Material Guard Bowl Band Element SUS0 SUS0 SUS0 NBR NBR 7 Band cover Polyamide 8 8 Plug SUS0 79

7 AF000 Series Dimensions AF00P/S/M to AF00S/M AF00X to AF00X -Port size A B () D -Port size A D () B Element life indicator DT000--W C (7) 78 E and over (element change space) () C E and over (element change space) nic Inner diameter ø.7 to ø nylon tube Automatic drain sensor Pressure Model no. Port size A B C D E AF00P/S/M/X- AF007P/S/M/X-0 AF00P/S/M/X-0 Rc Rc / Rc / AF0P/S/M/X-0 AF00S/M/X-0 Rc Rc The element life indicator is mounted only on the M type. E dimensions indicate the maintenance space. Automatic drain and ball valve are attached

8 AF000 Series Repair parts list Repair parts list Repair parts list Repair part kit No. Model AF00*- () Automatic drain () AF007*-0 AF00*-0 AF0*-0 AF00*-0 AF00P-QFL-98 The P/S/M/X series name is indicated with *. The drain separator cannot be mounted on the X type. DT000--W nic Element Repair part kit No. Model AF00*- AF007*-0 AF00*-0 AF0*-0 P type element AF00P-KFL-9 AF007P-KFL-9 AF00P-KFL-9 AF0P-KFL-9 S type element AF00S-KFL-9 AF007S-KFL-9 AF00S-KFL-9 AF0S-KFL-9 M type element AF00M-KFL-97 AF007M-KFL-97 AF00M-KFL-97 AF0M-KFL-97 X type element AF00X-KFL-98 AF007X-KFL-98 AF00X-KFL-98 AF0X-KFL-98 sensor Pressure AF00*-0 AF00S-KFL-9 The P/S/M/X series name is indicated with *. The element kit consists of the () and element (). The (), element () and battery kit applies only for the M type element. AF00M-KFL-97 AF00X-KFL-98 8

Low dew point type. Discrete standard dew point type (SD3015-B) (SD3035-B) (SD3050-B) (SD3075/4050-B) (SD4075-B) (SD4100-B) (SD3015-A)

Low dew point type. Discrete standard dew point type (SD3015-B) (SD3035-B) (SD3050-B) (SD3075/4050-B) (SD4075-B) (SD4100-B) (SD3015-A) Pressure Series variation Series Features Applicable compressor kw 0.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 22 37 55 75 95 120 150 200 250 300 400 480 710 960 1450 With common exhaust port Medium pressure