!!! NEWS AND UPCOMING PRODUCTS

Transcription

1 !!! NEWS AND UPCOMING PRODUCTS

2

3 ROADMAP 2017/2018

4 4!!! NEWS AND UPCOMING PRODUCTS NEWS Z-THERM2 Heatit Z-Therm2 is an electronic thermostat for floor heating. It has a built-in Z-Wave chip that may be integrated in a variety of smart home systems. Heatit Z-Therm2 is an updated version of the product Heatit Z-Wave. We have included the following new features: S2 security Power metering Relay status Multilevel sensor command class COMING 2018 NEWS Z-WATER Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. It can manage up to 10 heating circuits and it has 4 analog/digital inputs. The 10 x relay outputs are freely controlled through the Z-Wave network, and may be used for various purposes. The regulator can be connected to different temperature sensors (linked devices) through your Z-Wave gateway. Can be used together with Heatit Z-Temp sensor in each zone. Z-ICECONTROL Snow melting automation keeps your outdoor areas dry and free from ice and snow throughout the winter. It helps prevents accidents in slippery conditions, as well as saving work shoveling, sanding, salting etc. Ground sensors should be mounted in places where snow and ice problems normally occur, it provides functional and energysaving control of heating cables. Heatit Z-IceControl may be connected to different types of sensors: ground sensors, air sensors, precipitation sensors and roof/gutter sensors. COMING Z-TEMP The Heatit Z-Temp is an electronic temperature sensor for measuring room temperature. It has also connectors so you can connect an external sensor (floor sensor or external room sensor). The built-in temperature sensor measures the ambient temperature. The product must be installed and documented in accordance with the current version It allows of the installation you to guide. control Installation your is to heating/cooling, be performed by an authorized based electrician on room only. temperature in the room where it is installed.

5 Z-SCENE CONTROLLER Heatit Z-Scene Controller is a Z-Wave module which has been developed to fit the GIRA KNX push sensors. It is equipped with wireless Z-Wave communication that may be used to control other Z-Wave applications such as dimmers, relays e.a. The Heatit Z-Scene Controller can be used as a central scene controller. It has built in a 5A relay. 5 NEWS Z-RADON METER Heatit Z-Radon meter will provide you with detailed information about radon, temperature and humidity levels. View daily, weekly, monthly and yearly measurements. Use the data to take the necessary steps to protect your home and loved ones from the dangers of radon gas. COMING Z-RELAY Heatit Z-Relay multipurpose relay module can be used for many different applications. The IP 55 rated casing makes it useful for any outdoor application. Can pull loads up to 16A/25A. The relay has 3 inputs, 2 x temperature sensors and 1 x leakage sensor. We also offer a firmware with digital inputs. Heatit Z-Relay is a multipurpose product and can be used for: Boiler control Temperature control Leakage control Outdoor applications Z-STOVE GUARD Heatit Z-Stove Guard consists of an intelligent temperature sensor and a 25A relay. It can be used with all electrical stoves. The Stove Guard monitors the temperature on the stove and if a dangerous situation accurs, the stove guard will cut off the power. Mandatory product in all new installations in Norway. Certified according to EN Z-DIM Dimmer for many different types of light sources. The Heatit Z-Dimmer works on low loads without causing the lights to flicker. The dimmer works fine from low loads as 1W and upwards. It dims 230V halogen- and incadescent bulbs, LED from 1-200VA, dimable LED-drivers og electronic transformers. + COMING 2018 COMING NEWS

6 6!!! OTA AND POWER METERING Z-THERM2 PRODUKTINFO Heatit Z-Therm2 FEATURES Floor sensor External room sensor Built-in room sensor Temperature limiter Power regulator LED-diode Can be used in connection with different NTC-sensors Lock mode/child lock Backlight chip, 500 series Calibration Weekly program/setback via 8 associations gateway or pilot wire Power metering Multilevel sensor command class Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class Z-THERM2 White RAL 9003 Z-THERM2 Black RAL 9011 Heatit Z-Therm2 is an electronic thermostat for floor heating in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems like Fibaro, Future Home, Smarthings, Homeseer, Vera, Zipato etc. Heatit Z-Therm2 is equipped with a single pole switch and it fits most System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors. The thermostat has the capacity of up to 8 associations (relays, wall plugs etc.). The thermostat is designed for electrical heating. TECHNICAL DATA Protocol SDK Rated voltage 230V 50/60Hz Max load 2900W (resistive load) 750W self-limiting heating cable Max current 13A Power consumption 2,0W Power regulator Time cycle 0-30 min Min/max installation temp -20 C - 40 C Min/max operating temp 5 C - 40 C Temperature intervals Floor sensor 5 C - 40 C External room sensor 5 C - 40 C Hysteresis 0,3 C - 3,0 C (default 0,5 C) Switch Single-pole switch Included in package Floor sensor, Art. no Compatible with NTC sensors with values 10, 12, 15, 22, 33 and C IP Class IP 21 Color White RAL 9003 Black RAL ,1mm TERMINAL Use 1,5mm² or 2,5mm² according to load. 15,6mm 21,3mm 49,5mm FLOOR SENSOR EXTERNAL SENSOR 86mm 49,5mm Z-Therm2 TF 033 Made in EU ART. NO. WHITE ART. NO. BLACK PRODUCT Z-WAVE Heatit Z-Therm2 thermostat 2900W 13A EU 868,4 MHz Heatit Z-Therm2 thermostat 2900W 13A BR 921,4 MHz HEATING L L N HEATING N PILOT WIRE Heatit Z-Therm2 thermostat 2900W 13A US 908,4 MHz Heatit Z-Therm2 thermostat 2900W 13A RU 869 MHz Heatit Z-Therm2 thermostat 2900W 13A US2 916 MHz Heatit Z-Therm2 thermostat 2900W 13A IND 865,2 MHz

7 7 PRODUKTINFO Heatit Z-Temp FEATURES Built-in room sensor External sensor Weekly program/setback via gateway Multilevel sensor command class Z-TEMP Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class LCD display Can be used in connection with different NTC-sensors Lock mode/child lock Negative display Calibration Associations TECHNICAL DATA Protocol SDK Rated voltage 3 x AAA batteries Min/max installation temp 0 C - 40 C Min/max operating temp 5 C - 40 C 1 x External sensor -20 C C Hysteresis 0,3 C - 3,0 C (default 0,5 C) Compatible with NTC sensors with values 10, 12, 15, 22, 33 and C IP Class IP 21 Color White RAL 9003 Black RAL 9011(Made to order) The Heatit Z-Temp is an electronic temperature sensor for measuring room temperature. It has also connectors so you can connect an external sensor (floor sensor or external room sensor). The built-in temperature sensor measures the ambient temperature. It allows you to control your heating/cooling, based on room temperature in the room where it is installed. The Heatit Z-Temp has a LCD display that shows you the ambient temperature. You are able to make adjustment with the 3 buttons on the unit. The Heatit Z-Temp is the perfect partner to our Heatit Z-Water regulator for hydronic heating systems. ART. NO. WHITE ART. NO. BLACK PRODUCT Z-WAVE Heatit Z-Temp temperature sensor EU 868,4 MHz Heatit Z-Temp temperature sensor BR 921,4 MHz Heatit Z-Temp temperature sensor US 908,4 MHz Heatit Z-Temp temperature sensor RU 869 MHz Heatit Z-Temp temperature sensor US2 916 MHz Heatit Z-Temp temperature sensor IND 865,2 MHz 20 mm 99 mm 99 mm

8 8 Z-RELAY PRODUKTINFO Heatit Z-Relay FEATURES Multipurpose product for many different applications Relay 16A or 25A 2 x External sensors 1 x Leakage sensor Power metering Multilevel sensor command class Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class Analog/digital inputs (different firmware versions) Can be used in connection with different NTC-sensors Calibration Associations Heatit Z-Relay multipurpose relay module can be used for many different applications. The IP 55 rated casing makes it useful for any outdoor application. Can pull loads up to 16A and 25A. The relay has 3 inputs, 2 x temperature sensors and 1 x leakage sensor. We also offer a firmware with digital inputs. Heatit Z-Relay is a multipurpose product and can be used for the following applications: Boiler control Leakage control Temperature control Outdoor applications The relay has 3 x analog/digital inputs (different firmware) and can be used with a lot of different sensors and meters. The relay comes in two different versions, 16A and 25A. They both have firmware updates (OTA), power metering and S2 security. TECHNICAL DATA Protocol SDK Rated voltage 230V 50/60Hz Max load 3600W/5750W (resistive load) 750W self-limiting heating cable Max current 16A or 25A Power consumption 2,0W Min/max installation temp -20 C - 40 C Min/max operating temp -20 C - 40 C 2 x External sensors -20 C C Hysteresis 0,3 C - 3,0 C (default 0,5 C) Compatible with NTC sensors with values 10, 12, 15, 22, 33 and C Range Up to 30 meters (depending on surroundings) IP Class IP 55 Size (LxWxD) 100 x 100 x 46 mm We are able to make special firmware if a customer has a special requirement. ART. NO. PRODUCT Z-WAVE Heatit Z-Relay 16A EU 868,4 MHz Heatit Z-Relay 16A BR 921,4 MHz Heatit Z-Relay 16A US 908,4 MHz Heatit Z-Relay 16A RU 869 MHz Heatit Z-Relay 16A US2 916 MHz Heatit Z-Relay 16A IND 865,2 MHz ART. NO. PRODUCT Z-WAVE Heatit Z-Relay 25A EU 868,4 MHz Heatit Z-Relay 25A BR 921,4 MHz Heatit Z-Relay 25A US 908,4 MHz Heatit Z-Relay 25A RU 869 MHz Heatit Z-Relay 25A US2 916 MHz Heatit Z-Relay 25A IND 865,2 MHz

9 9 APPLICATIONS BOILER CONTROL LEAKAGE CONTROL TEMPERATURE CONTROL OUTDOOR APPLICATIONS LEAKAGE CONTROL LEAKAGE CONTROL WITH SOLENOID We have developed the relay module to work with our leakage sensor. You can control the solenoid so you turn off the water supply when you are away. Automatically close the valve when there is a leak. The relay can be associated with several leakage sensors. BOILER CONTROL We offert two different relay modules 16A or 25A for boiler control. You can control your boiler and we have included power metering so you are able to keep control over the costs. + TEMPERATURE CONTROL HEATING/COOLING We are able to control any electrical heating and cooling with the 2 x sensors. Either comfort temperature or max or min limitations. Can be used in connection with Heatit Z-Temp sensor for optimal control. OUTDOOR APPLICATIONS The relay has a IP 55 casing and can be used for any thinkable application outdoors. Anything from watering in your garden, frost protection or control of any heating device.

10 10 Z-WATER - REGULATOR FOR HYDRONIC HEATING SYSTEMS PRODUCT INFO Heatit Z-Water FEATURES The relay outputs may be used for controlling actuators/valves in a hydronic heating system May be used to control both 24V actuators and 230V actuators Analog/digital inputs (different FW versions) Can be used together with a Heatit Z-Temp sensor in each zone DIN rail mounting Works as a Z-Wave repeater Compatible with Z-Wave and gateways Available firmware versions (analog/digital inputs) Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. Heatit Z-Water is a module that clips right onto a DIN rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/ digital inputs, and a Z-Wave radio for interfacing to the wireless Z-Wave network. The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off control of light, control of valve actuators for an underfloor heating system, or control of other home automation systems. Heatit Z-Water analog/digital inputs (different firmware versions) can be configured to work with different functionality and can be connected to potential free contacts, open-collector outputs, and will be able to control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs can be used as a Scene Controller and send Central Scene notifications to the Z-Wave gateway. It is possible to configure the level and the indication of the status indicator LED in the front of the Heatit Z-Water module. TECHNICAL DATA Protocol SDK Rated voltage 100V-240V 50/60Hz Power consumption 0.6W standby Fuse 3.15A Quick-Acting, UMF 250 Schurter Inc., part no.: V DC output Maximum 1.17A, 28W Relay outputs Rated carry current: 5A Max. switching voltage: 250V AC, 30V DC Max. switching current: 5A Max. switching power: 1,250 VA, 150W Inputs Max. input voltage: 10V DC Input impedance: 10 KΩ Loop output voltage: 5V DC Explorer frame supp. Yes Device type Slave with routing capabilities Generic device class Binary Switch Specific device class Valve Open Close Routing Yes FLiRS No Yes Approvals CE EN : 2009 EN : mm 58mm ART. NO. PRODUCT Z-WAVE Heatit Z-Water - regulator for hydronic heating systems EU 868,4 MHz Heatit Z-Water - regulator for hydronic heating systems BR 921,4 MHz Heatit Z-Water - regulator for hydronic heating systems US 908,4 MHz Heatit Z-Water - regulator for hydronic heating systems RU 869 MHz Heatit Z-Water - regulator for hydronic heating systems US2 916 MHz 86mm Heatit Z-Water - regulator for hydronic heating systems IND 865,2 MHz 52 år yr

11 11 PRODUCT INFO Heatit Z-IceControl FEATURES Controls both electrial and hydronic heating systems Two outputs controlling two independent zones Ground sensor Roof/gutter sensor External air sensor Z-ICECONTROL Precipitation sensor Graphic display with help function MODBUS 485 for SD-installations Compatible with Z-Wave and gateways Power metering Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class TECHNICAL DATA Protocol SDK Rated voltage 230V Power consumption Max 10VA Contacts 2 x 16A, potential free Relay 1 x 10A for direct load IP Class IP 20 Size (LxWxD) 213 x 93 x 50mm ART. NO. PRODUCT Z-WAVE Heatit Z-IceControl - snow melting regulator EU 868,4 MHz Heatit Z-IceControl - snow melting regulator BR 921,4 MHz Heatit Z-IceControl - snow melting regulator US 908,4 MHz Heatit Z-IceControl - snow melting regulator RU 869 MHz Heatit Z-IceControl - snow melting regulator US2 916 MHz Heatit Z-IceControl - snow melting regulator IND 865,2 MHz Heatit roof/gutter sensor Heatit ground sensor Heatit air sensor Snow melting automation keeps your outdoor areas dry and free from ice and snow throughout the winter. It helps prevents accidents in slippery conditions, as well as saving work shoveling, sanding, salting etc. Ground sensors should be mounted in places where snow and ice problems normally occur, it provides functional and energy-saving control of heating cables. The sensors can be installed in concrete or asphalt, or laid under paving stones and tiles. Your problem may be ice and snow on the stairs in front of your entrance or perhaps a slippery driveway. In either case, a thermostat is used to regulate your snow melting system. The Heatit Z-IceControl receives information about the temperature and humidity from a sensor. The regulator can distinguish between rain and snow and predict if there is a chance for ice forming. The Heatit Z-IceControl regulator will keep the access to your mailbox or garage free from snow and ice, based on your desired system settings. A pre-programmed installation procedure guides you through the setup and helps you make choices that fit your needs. Based on your choices the snow melting regulator will suggest the optimal settings for your system Heatit precipitation sensor 213mm 50mm 93mm

12 12 Z-SCENE CONTROLLER Z-WAVE SWITCH PRODUCT INFO Heatit Z-Scene Controller FUNCTIONS Z-Wave Scene Controller is a central scene controller 230V unit, acts as a repeater increasing network stability Up to 6 different channels All six LED-diodes are controlled individually and their functionality is configurered in the gateway May be associated to other Z-Wave units Uses standard Gira push button modules with different designs and colors Low power usage, less than 0,3W in standby mode The firmware contains Multi-Channel Command Class for a better visualisation and more logical control in the Z-Wave gateway Compatible with Z-Wave and gateways The Heatit Z-Wave Scene Controller is a Z-Wave module specifically adapted to Gira KNX touch sensors. The Heatit Z-Wave Scene Controller is a device with built-in wireless Z-Wave communication that may be used to control other Z-Wave devices such as dimmers, relay modules, etc. The scene controller has a built-in relay that can be used to turn on and off a local load, e.g. a lamp, thus replacing a standard 1-pole switch. The Heatit Z-Wave Scene Controller consists of six switches, two switches behind each of the three buttons. Each switch can be used individually or configured to work in pairs. For instance: One side of the button switches the light on, while the other side switches it off. The module also functions as a scene controller by transferring various scene commands when the push buttons are pressed in different ways. All of the 6 buttons can be programmed to have different functionalities. In addition to this, the Heatit Z-Wave Scene Controller acts as a repeater and is able to extend the range of your Z-Wave network. TECHNICAL DATA Protocol Rated voltage 230V 50Hz Max load 1000W 5A (resistive load) or up to 150W inductive load Power consumption 0,8W / 0,3W standby Push buttons Up to 6 Range Up to 40 meters (depending on surroundings) IP Class IP 20 Size (LxWxD) 70 x 70 x 27mm ART. NO. PRODUCT Z-WAVE Heatit Z-Scene Controller - switch EU 868,4 MHz Heatit Z-Scene Controller - switch BR 921,4 MHz Heatit Z-Scene Controller - switch US 908,4 MHz Heatit Z-Scene Controller - switch RU 869 MHz Heatit Z-Scene Controller - switch US2 916 MHz Heatit Z-Scene Controller - switch IND 865,2 MHz 70mm The switch fits into standard Elko, Schneider Exxact and Gira System 55 frame systems. 70mm 80mm 55mm GIRA is a trademark of GIRA Giersiepen GmbH & Co. BODIL, OK PLASSERING OM GIRA?

13 13 PRODUCT INFO Heatit Z-Dim FEATURES Multidimmer Dims: LED 230V halogen Z-DIM FOR VARIOUS LIGHT SOURCES Incandescent lightbulbs Dimable LED-drivers Electronic transformators Starts at 1VA and dims up to 200VA LED Trailing edge, may be changed to leading edge Multiway switching option Electronic thermal cutoff Electronic current cutoff with automatic reset Compatible with Z-Wave and gateways Power metering Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class TECHNICAL DATA Protocol SDK Rated voltage 230V Power 1-200VA Input current 0,9A Controls Push and rotate dimmer Operating temperature -20 C - 40 C Connection Max. 2,5mm² Flush mounting depth 25mm Approvals EN 55015/A2: 2009, EN 61547:2009 EN /A2:2009 EN :2008 EN /A12:2010 EN :A2:2008 IP Class IP 20 Color White RAL 9010 Size (LxWxH) 84 x 84 x 35mm Dimmer for many different types of light sources. The Heatit Z-Dimmer works on low loads without causing the lights to flicker. The dimmer works fine from low loads as 1W and upwards. It dims 230V halogen- and incadescent bulbs, LED from 1-200VA, dimable LED-drivers og electronic transformers. The dimmer is not affected by startup inrush currents. The Heatit Z-Dimmer fits most frames. It is equipped with a multiway switching option. This allows you to light and dim a light source from one dimmer, and later turn it off with another one. Very practical for stairwells, long hallways etc. The Heatit Z-Dimmer switches off if the load exceeds the maximum level. In order for the dimmer to work correctly again, the error must be corrected and the dimmer turned off and on one time. The dimmer fits into standard Elko, Schneider Exxact and Gira System 55 frame systems. 35 mm 84 mm ART. NO. PRODUCT Z-WAVE Heatit Z-Dim 200VA - LED dimmer EU 868,4 MHz Heatit Z-Dim 200VA - LED dimmer BR 921,4 MHz Heatit Z-Dim 200VA - LED dimmer US 908,4 MHz Heatit Z-Dim 200VA - LED dimmer RU 869 MHz 84 mm Heatit Z-Dim 200VA - LED dimmer US2 916 MHz Heatit Z-Dim 200VA - LED dimmer IND 865,2 MHz Fits with the most common frames on the market.

14 14 Z-RADON METER - DETECTS HARMFUL RADON IN YOUR HOME FIRST OF ITS KIND IN THE MARKET DETECTS HARMFUL RADON IN YOUR HOME PRODUCT INFO Heatit Z-Radon meter FEATURES Measures radon levels, temperature og humidity Reports radon levels daily, weekly, monthly and annually Detailed information via your Z-Wave network Compatible with Z-Wave and gateways Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class Heatit Z-Radon meter is a completely new type of radon meter - the first of its kind in the market. The radon meter is integrated into your Z-Wave network, giving you detailed information about the radon level, temperature and humidity where the meter is mounted. The radon meter should be placed in any dry room indoors. Heatit Z-Radon meter is equipped with a light ring that gives you a direct visual indication of the radon level. You can simply wave in front of the meter and it will indicate with green, yellow or red light how high the radion level is. This way you will quickly see if there is a present danger and take action to reduce the radon level. TECHNICAL DATA Protocol ART. NO. WHITE PRODUCT SDK Power 2 x AA Battery 1,5V Measurement accuracy 7 days: Within 20% of actual level 1 month: Within 10% of actual level Min/max temperature 4 C - 40 C Relative humidity <85% Range Up to 40 meters (depending on surroundings) Size (DxH) 120 x 36mm Z-WAVE Heatit Z-Radon meter EU 868,4 MHz Heatit Z-Radon meter BR 921,4 MHz Heatit Z-Radon meter US 908,4 MHz Heatit Z-Radon meter RU 869 MHz Heatit Z-Radon meter US2 916 MHz Heatit Z-Radon meter IND 865,2 MHz WHAT IS RADON? Radon is an invisible and odorless gas that is formed continuously underground. The gas is radioactive and is formed from natural radioactive substances such as uranium in the bedrock and soil. Areas of granite, shale and slate are common contributers to the development of radon gas. 120mm Radon is harmful because people may inhale the gas, causing the lungs to be affected by radioactive radiation. This may lead to lung cancer. According to the World Health Organization (WHO) radon is the main cause of lung cancer development next to active smoking. It is estimated that radon in homes causes between 6% and 15% of the total number of lung cancer deaths in the world.

15 15 PRODUCT INFO Heatit Z-Stove Guard FEATURES Fixed stove guard Double security Time & temperature Built-in location sensor Turns stove off automatically after 2 hours if off relay button is Z-STOVE GUARD not used (expandable) Turns stove off automatically if the sensor detects overheating Memory placement function Tamper protection 25A relay Calibration Associations Compatible with Z-Wave and gateways Power metering Supports encryption mode: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class TECHNICAL DATA STOVE SENSOR Protocol Bluetooth NFC SDK Battery 2 x AA ( lifetime) Size (LxWxH) 83 x 21 x 39mm Stoves are the main source of house fires. By installing a stove guard, you can ensure that the stove switches off automatically if a dangerous situation should arise. Heatit Z-Stove Guard consists of an intelligent temperature sensor and a 25A relay. It can be used with all electrical stoves. The Stove Guard monitors the temperature on the stove and if a dangerous situation accurs, the stove guard will cut the power. Mandatory product in all new installations in Norway. TECHNICAL DATA STOVE SOCKET Rated voltage 230V 50/60Hz Max current 25A On time 2 hours (expandable) Size (LxWxH) 234 x 110 x 58mm Approvals EN The stove guard consists of a sensor and a relay. It is either placed behind the stove or in the fuse box. The sensor monitors the heating elements. If the sensor detects a fire hazard, it triggers an alarm. If no measures are taken within a short time, the sensor sends a power cut command to the relay, turning the stove off. Certified according to EN ART. NO. PRODUCT Z-WAVE Heatit Z-Stove Guard EU 868,4 MHz Heatit Z-Stove Guard BR 921,4 MHz Heatit Z-Stove Guard US 908,4 MHz Heatit Z-Stove Guard RU 869 MHz Heatit Z-Stove Guard US2 916 MHz Heatit Z-Stove Guard IND 865,2 MHz Heatit Z-Stove Guard may be placed on the wall or in the cooker hood with wireless communication to the stove socket. The stove socket replaces a traditional socket. The stove top is connected directly to the stove socket. 234mm 55mm 110mm

16 16 Thermo-Floor AS can not be held liable for typographical errors, other errors or omittances in our information. Product specifications may change without further notice. All electrical installations must be carried out by a licensed electrician. The product must be installed in accordance with national building codes and our installers manual. Thermo-Floor AS l Østre Totenvei 24, NO-2816 Gjøvik, NORWAY l Phone: l post@heatit.com