Dimming expertise LED UNIVERSAL ROTARY DIMMER

Size: px

Start display at page:

Download "Dimming expertise LED UNIVERSAL ROTARY DIMMER"

Moses Nicholson
6 years ago
Views:

1 Dimming expertise

Whether rotating or pressing LED UNIVERSAL TOUCH DIMMER

the elegant LED universal rotary dimmers and touch dimmers.

And visually elegant thanks to the diverse JUNG design.

2 Whether rotating or pressing LED UNIVERSAL TOUCH DIMMER Future-proof, energy-saving dimming can be so simple with the elegant LED universal rotary dimmers and touch dimmers. Intuitive and convenient to operate. With storable settings. And visually elegant thanks to the diverse JUNG design. In short: two all-round highlights for the perfect feel-good lighting.

The right dimming principle Well-thought-out operation The LED universal dimmers work according to the leading edge phase control or trailing edge phase.

shaft (rotary dimmer) or the dimmer mode key (touch dimmer). A coloured LED displays the chosen operation mode.

DIMMING WITH S With the LED universal rotary dimmer, a connected satellite unit (push-button or 2-wire satellite unit) can also be used for dimming.

ROTATION AND PRESSING With the LED universal rotary dimmer, the operation and storing of settings use the well-known principle of rotation or pressing or

THE LED LIGHTS UP GREEN THE LED LIGHTS UP RED THE LED LIGHTS UP BLUE Automatic calibration to the load Trailing edge phase control for light bulbs, HV

phase control for dimmable inductive or dimmable LED lamps LED leading edge phase control for dimmable HV LED or The dimmer is working with the trailing

Trailing edge phase control for dimmable electronic or LED lamps The dimmer is working with the leading edge phase Setting for incandescent lamps, HV

universal rotary dimmer offers the possibility to save a fixed brightness when switching on so that the lamp switches on with the same brightness each

3 The right dimming principle Well-thought-out operation The LED universal dimmers work according to the leading edge phase control or trailing edge phase. Setting the device to the dimming principle that matches the respective consumer is done automatically, or manually on the device using the potentiometer shaft (rotary dimmer) or the dimmer mode key (touch dimmer). A coloured LED displays the chosen operation mode. The setting of the minimum brightness is also carried out with the potentiometer shaft or the dimmer mode key. DIMMING WITH S With the LED universal rotary dimmer, a connected satellite unit (push-button or 2-wire satellite unit) can also be used for dimming. The same applies to the LED universal touch dimmer. ROTATION AND PRESSING With the LED universal rotary dimmer, the operation and storing of settings use the well-known principle of rotation or pressing or rotation and pressing. THE LED LIGHTS UP GREEN THE LED LIGHTS UP RED THE LED LIGHTS UP BLUE Automatic calibration to the load Trailing edge phase control for light bulbs, HV halogen lamps, dimmable HV LED, or compact fluorescent lamps as well as dimmable electronic transformers with LV halogen or LV LED lamps Leading edge phase control for dimmable inductive or dimmable LED lamps LED leading edge phase control for dimmable HV LED or The dimmer is working with the trailing edge phase control principle Setting for incandescent lamps, HV halogen lamps, dimmable HV LED or that can be dimmed using the trailing edge phase Trailing edge phase control for dimmable electronic or LED lamps The dimmer is working with the leading edge phase Setting for incandescent lamps, HV halogen lamps, dimmable HV LED or that can be dimmed with the leading edge phase Leading edge phase control for dimmable electronic or LED lamps The LED universal rotary dimmer offers the possibility to save a fixed brightness when switching on so that the lamp switches on with the same brightness each time. Alternatively, the Switch on with the brightness last set function can be selected. The LED universal touch dimmer also offers the possibility of saving a fixed brightness when switching on. Alternatively, the minimum brightness is triggered with a long press on the lower cover. The light source is switched on in all cases with a soft start that is gentle on the lamp. If no neutral conductor (2-wire) is available at the installation location, both dimmers can also be operated with - out neutral.

Modular system The LED universal touch dimmer can be combined with numerous light management covers. Technical information Overview of performance features of both universal dimmers.

10 m standard automatic switch hallways and stairways 2.20 m automatic switch hallways and stairways. 2.20 m installation heigh

4 Modular system The LED universal touch dimmer can be combined with numerous light management covers. Technical information Overview of performance features of both universal dimmers. Ceiling automatic switch For automatic switching of lighting, depending on the heat of moving objects and ambient brightness. Primary application: hallways, sanitary environments etc m standard automatic switch hallways and stairways 2.20 m automatic switch hallways and stairways m installation height (e.g. above doors for directly sensing persons entering the hallway and the like) enet radio centre plate For wirelessly switching or dimming lighting; intended for incorporation into the enet bidirectional wireless system REF-NO. 224 LED UDD LED UNIVERSAL TOUCH DIMMER REF-NO LED UDE PROPER USE Presence detectors For automatic switching of lighting, depending on the heat of moving objects and ambient brightness. Primary application: desk workplaces, offices etc m universal automatic switch hallways and staircases. Brightness values may be stored for desired brightness/ energy efficiency Standard centre plate Operated by pressing the upper or lower half or the entire key surface: switching, dimming, and saving the current dimming value Universal centre plate Operated by pressing the upper or lower half or the entire key surface: switching, dimming, and saving the current dimming value. Moreover, different functions (time-dependent dimming, dawn sensor, memory switch, random switch) may be assigned Switching and dimming of incandescent bulbs, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps PRODUCT CHARACTERISTICS Installation in socket in accordance with DIN Operation with suitable cover MAIN UNIT LED universal touch dimmer 3-wire satellite units The device uses the leading edge phase control or trailing edge phase control principle Automatic or manual setting of the dimming principle applicable for the load Display of the operating mode set using LED Device can be operated without a neutral conductor Switching on uses a soft start that is gentle on the lamp Switching on with the last set brightness (only for rotary dimmers) or with the saved switch-on brightness Switch-on brightness can be permanently stored Minimum brightness can be permanently stored Satellites can also be connected Electronic short-circuit protection with permanent shut-off within 7 seconds Electronic overtemperature protection Capacity expansion possible using capacity amplifier. Where capacity amplifier are used, do not connect LED or compact fluorescent lamps. LED light sources up to 200 watt connected load with trailing edge phase control Standard centre plate 2-wire satellite units Push-button Rocker for push-button designed for main unit use designed for satellite unit use

5 ALBRECHT JUNG GMBH & CO. KG P.O. Box Schalksmühle Germany Phone Fax For sales contacts in your country see: JUNG.DE P-GB-LEDUDE0417

DIMAX DIMAX D GB F I E NL. Installation and operating instructions Universal dimmer DIMAX 532. Minimum DIMAX 532.

DIMAX DIMAX D GB F I E NL. Installation and operating instructions Universal dimmer DIMAX 532. Minimum DIMAX 532. 309 449 GB DIMAX DIMAX 532 532 0 000 A1 A2 Installation and operating instructions Universal dimmer DIMAX 532 D GB F I E NL Minimum 2 1 perm ON N L L DIMAX 532 Contents Basic safety instructions 3 Designated