Thermalright. TRUE Spirit 120I

Size: px

Start display at page:

Download "Thermalright. TRUE Spirit 120I"

Maurice Roberts
6 years ago
Views:

1 Thermalright TRUE Spirit 120I

3 TRUE Spirit 120I Assembly Package Chill Factor 2g 1 1 8

4 TRUE Spirit 120I Intel 775/1150/1155/1156/166 Exploded View Important! Before proceeding with installation, please check for the most up-to-date instructions at Heatsink Body Fan Clip 120mm Fan M L6 Screw Anchoring Mount Mounting Plate Screw Nut Intel Washer(small) M L10 Screw 1

5 Component Chill Factor 2g Heatsink Body 1 2 Anchoring Mount 1 Mounting Plate 1 Screw Nut 5 M L10 Screw 5 6 M L6 Screw Intel Washer (small) AMD Washer (big) Thermal Paste mm Fan Fan Clip Anti Vibration Strips The Ultimate Cooling Solutions! 2

6 Installation Instructions: Step 1: 1 2 Step 1 : Install the four screw pillars. Take one ML10 screw and put one washer for Intel around the screw pillar. Snap it through one of holes around CPU socket from bottom towards top. Cap the screw pillar with the screw nut included and then tighten up. Now repeat this installation for the other three screw pillars in a criss-cross pattern. Step 2: 1 2 Step 2 : Place the Anchoring Mount on the Screw Nuts. Use the four ML6 Screws to fix the Anchoring Mount on to the Screw Nuts. Step : Chill Factor 2g Chill Factor 2g Step : Applying Thermal Paste. Apply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly.

7 Step : Step : Fan Clip Installation Pass each end of the Fan Clips through the mounting holes on the cooler body. Then stick one Anti Vibration Strip on each side of the cooler. Step 5: Step 5 : Mounting Plate Installation Place the Heatsink Body on top of the CPU. Make Mounting Plate go through the Heatsink Body. And then use the two ML6 screws to secure the Mounting Plate. Step 6: Step 6 : Fan Installation Place the included 120mm Fan onto the Heatsink Body. And then secure it with the Fan Clips, by pulling the Fan Clips to place the four ends at the four holes on the 120mm Fan. Step 7: Step 7 : Installation Completed Plug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete. The Ultimate Cooling Solutions!

8 TRUE Spirit 120I AM2/AM2+/AM/AM+/FM1/FM2 Exploded View Important! Before proceeding with installation, please check for the most up-to-date instructions at Fan Clip Heatsink Body 120mm Fan M L6 Screw Anchoring Mount Mounting Plate Screw Nut AMD Washer(big) M L10 Screw 5

9 Component Chill Factor 2g Heatsink Body 1 2 Anchoring Mount 1 Mounting Plate 1 Screw Nut 5 M L10 Screw 5 6 M L6 Screw Intel Washer (small) AMD Washer (big) Thermal Paste mm Fan Fan Clip Anti Vibration Strips The Ultimate Cooling Solutions! 6

10 Installation Instructions: Step 1: 1 2 Step 1 : Install the four screw pillars. Take one ML10 screw and put one washer for AMD around the screw pillar. Snap it through one of holes around CPU socket from bottom towards top. Cap the screw pillar with the screw nut included and then tighten up. Now repeat this installation for the other three screw pillars in a criss-cross pattern. Step 2: 1 2 Step 2 : Place the Anchoring Mount on the Screw Nuts. Use the four ML6 Screws to fix the Anchoring Mount on to the Screw Nuts. Step : Chill Factor 2g Chill Factor 2g Step : Applying Thermal Paste. Apply the Thermal Paste to the base of the Heatsink and the surface of the CPU evenly. 7

11 Step 6: Step 6 : Fan Clip Installation Pass each end of the Fan Clips through the mounting holes on the cooler body. Then stick one Anti Vibration Strip on each side of the cooler. Step 7: Step 7 : Mounting Plate Installation Place the Heatsink Body on top of the CPU. Make Mounting Plate go through the Heatsink Body. And then use the two ML6 screws to secure the Mounting Plate. Step 8: Step 8 : Fan Installation Place the included 120mm Fan onto the Heatsink Body. And then secure it with the Fan Clips, by pulling the Fan Clips to place the four ends at the four holes on the 120mm Fan. Step 9: Step 9 : Installation Completed Plug in the fan connector to the CPU PWM Fan socket on the motherboard. Installation complete. The Ultimate Cooling Solutions! 8

12 TRUE Spirit 120I Technical Spec Heatsink Specifications: Dimension: Length 12mm x Width 57.72mm x Height mm Weight: 70g (Heatsink only) Heatpipe: 6mm heatpipe* units Copper Base: C1100 Pure copper nickel plated Fan Specification: Dimension: L120mm x H120mm x W25mm Weight: 15g Fan speed: 600~100RPM (PWM controlled) Fan noise: 25.dBA MAX (Test distance 1.0M) Airflow: 6.19CFM MAX Connector: Pin (PWM Fan connector) 9

13 TRUE Spirit 120I The Ultimate Cooling Solutions! 10

15 The Ultimate Cooling Solutions! TEL: FAX:

Thermalright. Macho 120 Rev.A

Thermalright. Macho 120 Rev.A Thermalright Macho 20 Rev.A Macho 20 Rev.A Assembly package 7 5 Chill Factor 2g 2 8 Macho 20 Rev.A Intel 775/50/55/56/66 Exploded View Important! Before proceeding with installation, please check for