Antti grain dryers. the path to profitable farming.

Transcription

1 Antti grain dryers the path to profitable farming. B

2 Dry your grain and increase your profits Agrosec dryer 242CF6 Sweden Why dry grain? Grain has a high moisture content, and moisture means water. Therefore, in any grain container, moisture will inevitably lead to mould. When stored wet, all of your carefully cultivated and harvested crops run the risk of becoming ruined: unusable, inedible and completely unsellable. Storing wet crops while waiting for drying whether in open air cribs or any other method opens up the possibility of insect or rodent infestation, meaning contamination and a lower selling price. 2

3 Antti-Industry is an expert in grain handling. Our flagship product, the Antti grain dryer, has been the sector s technological forerunner for several decades. Technologically advanced, thoroughly researched and developed, created with the farmer in mind. Antti driers give you more, providing dry prime grain and most importantly, higher profits. So why dry grain? The answer is simple. Drying grain is like putting money in the bank. Farmers who dry their own crops can then hold all or part of it until the grain prices become more favourable. This usually happens months after the harvest. This should not be overlooked. The path to more profitable farming is simple. Professional, high-tech Antti grain dryers from Antti-Industry. Engineered for perfection, fault-free and reliable, Antti dryers will provide you with the maximum perfectly dried grain, with minimal loss through excess moisture. The better your grain, the better your selling price and the faster you can sell it. If you prefer to wait for even higher prices, when the harvest season has ended, old-fashioned storage techniques are just not suitable. You need to have the best grain. This is what we mean when we say that drying grain with Antti dryers is like putting money in the bank. Your own grain dryer luxury or necessity? Buying your own grain dryer is by no means a small investment. But it is one that will pay off and handsomely so. For example, think about when you deliver grain for storage, for instance to a grain store or common corn silo. If your grain is sufficiently dry at a safe storage level you can avoid wasting time queuing and waiting. Time you could spend with your family, or developing your production even further. Think about it and consider the benefits. With Antti-Industry you can stop worrying, focus on your work and achieve greater profits with every harvest. Perfectly dried corn for the best selling price. Start making more of your crops. Your investment in Antti dryers will pay for itself sooner than you think. Take your time and choose from our proven dryers featured in our catalogue. You will not be disappointed. And neither will your bank account. Antti-Industry 3

4 We discovered that the ultimate grain drying solution was not available. So we made it. 383DF4 Lithuania You decide when to dry, not the weather. The traditional method of drying cereal crops or maize in a continuous flow dryer is not always the optimal solution. Although it is great for large-scale production, it can only handle materials which are dry enough and is not economical for small-scale production. On the other hand, a circulating batch dryer is highly efficient for extreme moisture levels, well beyond the capacity of traditional dryers. Until now, the choice has been between these two methods. At Antti-Industry we have combined the two, placing both modes of operation at your disposal. With the Antti AgroSec Duoflo you have the best of both worlds. 253DF4 Sweden 4

5 The heart of Duoflo Antti AgroSec Duoflo is like nothing else on the market. Antti AgroSec Duoflo works just how you want it to: as a traditional continuous flow dryer for large-scale production with even quality grain, or as a circulating batch dryer for extremely wet grain or small batches. In the Duoflo the grain is constantly cycled through the plant, dried and then cooled again and again. The advantage is that you can dry wet corn (up to 35 40%) using higher temperatures, achieve shorter drying times and a better production rate. And of course, better prices for your crop. With Antti Agrosec Duoflo you can produce better grade grain at any time because you harvest when you want to. More production, less energy expenditure Whatever you feed into an Antti AgroSec Duoflo, it will dry. All you need to do is place the grain on the elevator and Antti will take care of the rest while you enjoy the benefits and profit. No matter what method and equipment you are used to using, Antti AgroSec Duoflo will outperform it. The Duoflo uses less energy and you still get the same results. Humidity no longer a problem When your grain is too wet, almost any dryer will get clogged up sooner or later. Wet grain also forms a near-solid mass that packs tightly into any space, including your transport trailers. But not with Antti AgroSec Duoflo. When your grain is too wet for continuous flow, the revolutionary circulating operation keeps the grain moving. As the system both dries and cools the grain in stages, the moisture constantly shifts from the grain kernel to the surface, leaving the grain more easily. In this way you achieve greatlyenhanced drying efficiency and avoid cooking, even with the wettest grain. In fact, the circulating batch flow works with very high moisture levels, where other systems would need the grain to be pre-dried. When your grain or maize crop is of an even quality and in a large amount, Antti AgroSec Duoflo operates as a standard, but highly-efficient, continuous mixed flow dryer, and enables you to reach production levels on an industrial scale. Duoflo added benefits and profits All this means that you can dry your crop when you want to, the way you need to. In addition, you can do it using less energy and even with wet grain so you operate more cost-effectively. Start harvesting sooner and accomplish the work in less time than with any other solution. All this adds up to greater profits: real money in your pocket. 5

6 When operating on a smaller scale, you want a powerful, yet flexible grain drying solution which can cope with all humidity levels. Smaller-scale production and demanding, high moisture-content products, such as maize, pose special challenges to grain drying. On the one hand, you want a powerful solution and on the other, you want to be able to choose when to dry your grain. We believe that this choice should be yours to make. At Antti we have been producing dryers for near-impossible crop-growing conditions for decades. This is why we have developed the Mixflo circulating batch dryers, which can cope with extreme humidity and allow you to choose when to dry. 6

7 Flexible production and profitable operation from day one even with high-humidity grain. The Mixflo advantage The ultimate advantage of an Antti Mixflo is its superior flexibility and suitability for to any weather conditions, and also for smaller-scale operations. In an Antti Mixflo circulating batch dryer, the grain, no matter how wet, is constantly circulated through the plant, alternately dried and then cooled, again and again, until you re left with perfectly dried top-grade grain that will command top prices. The choice of when to dry is yours to make. Your Antti dryer will get the job done. Dealing with humidity When your grain is too wet, almost any dryer will get clogged up sooner or later. Wet grain also forms a near-solid mass that packs tightly into any space, including your transport trailers. But not with Antti AgroSec Mixflo. Even with the wettest grain, the revolutionary circulating operation keeps the grain moving. Because the system both dries and cools the grain in stages, the moisture constantly shifts from the grain kernel to the surface, leaving the grain more easily. In this way you achieve greatly-enhanced drying efficiency and avoid cooking, even with the wettest grain. The system works with very high moisture levels, where other systems would need the grain to be pre-dried. In fact, precisely because of this, a batch fed dryer will work better the wetter your grain is while maintaining topnotch energy efficiency. Because your new drying plant is so advanced, you can choose when to dry. Dry your grain when you need, no matter what the weather is doing. No more need for pre-drying in the fields or risking crop loss, mould and quality decay through wet storage in silos, transport vehicles, and so on. How does batch drying work? The heater element and feeding system indeed, the whole plant operates in batches in which the grain is cycled through the plant. The biggest benefit is that you can dry grain which is wetter than any traditional dryer would cope with, and you can also dry your crops faster while avoiding cooking. This means you can harvest when you need to and produce better grade grain, no matter the weather. And as we all know, with better produce come better prices. With an Antti AgroSec Mixflo dryer you can do all this while using less energy and with wetter grain, so you operate more cost-effectively, get the job underway sooner and can be finished quicker more quickly than with any other solution. 7

8 Dryer series Ambient condition: 20 C/75% rh Moisture removal 18% ->14% Wheat Wheat, wet Maize Rape seep drying temp. 90 C Moisture removal 24% ->14% drying temp. 90 C Moisture removal 30% ->15% drying temp. 120 C Moisture removal 13% ->7% drying temp. 75 C MODEL total volume m3 dryer height m Heater Power kw Capacity t/h Heater Power kw Capacity t/h Heater Power kw Capacity t/h Heater Power kw Capacity t/h Antti Agrosec mixflo Circulating batch dryers 22MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF Antti Agrosec duoflo Continuous and circulating batch dryers 242DF DF DF DF DF DF DF DF DF DF DF DF DF DF DF CF CF CF CF CF CF CF CF Circulating batch dryer capacity: filling, cooling and discharge times are not included. Antti heater types and kilowatts Oil (gas, oil+gas), indirect Gas, direct Biofuels, indirect x 700 x x 2000 x x x x 700 x x x x x= choose next available Gas duct burner available to all dryer sizes

9 base type 2, 3, 4 base type 2 base type 3 base type 4 Base type 4,00 Effects for wheat 19% -> 15%; rape seed and sunflower 13% -> 7%, maize 30% ->15% moisture removal, outside conditions 20 C/75% RH. base, m 2 2,00 3,00 4,00 6,24 Drying temperature 90 C/75 C/100 C. cooling section, m 3 drying section, m 3 top section, m 3 3,12 3,12 4,32 4,68 4,68 6,48 6,24 6,24 8,64 8,64 Rights for technical alterations/improvements reserved. Effects depend on local requirements Dryer model key 242DF2 22MF2 242DF2 242DF2 22MF2 242DF2 22MF2 242DF2 22MF2 242DF2 22MF2 explanation number of cooling sections number of drying sections number of top sections type mixflo/duoflo/conflo base type 2/3/4/6(2x3)/8(2x4) and factors, and so the tables should be regarded as indicative only. Base 4 Base 3 Base 2 9 B

10 Antti Vacboost Mobile dryer The best solution for drying small volumes of grain and other seed crops. Antti s leading driers and furnaces represent unrivalled technology, developed for Finland s demanding climate. All our Vacboost driers can dry grain, peas, beans and most other seed crops. Contact Antti for application help. A complete set of modules includes: Roof, pre-cleaner Top sections Drying sections with air channel ends Base, heater and blower on frame Hopper Elevator Top sections Drying sections with air channel ends A mobile drier with quick start-up The Agrosec Vacboost mobile drier is easy to transport. At an economical price, it is a sensible investment: with no heavy foundation or construction work required, the package can be easily and quickly erected, ready for operation. Vacuum technology now in mobile driers Agrosec Vacboost dries maize, grain and small seeds quickly and energy-efficiently. The drying temperature can be set between 60 C C. The vacuum action helps to increase the drying speed and, at the same time, reduces the amount of dust by sucking air through the batch of grain or seeds being dried in the drying sections. Ladders Base, heater and blower on frame Elevator Hopper 10

11 3-way divider pre-cleaner circulation pipes filling sensor Wiring with quick couplings, connected to the dryer unit. Grain pocket. Mobile dryer type C Machinery type Drying volume (m 3 ) Max. filling capacity of dryer (m 3 ) Min. drying batch (m 3 ) Max. drying temperature ( C) Vacboost heater Thermal energy (kw) Oilon 2-flame burner Flue pipe (m) Air volume (m 3 /h) 80 C Suction air adjust. Motos Fan motor (kw) Pre-cleaner (kw) Feeding device (kw) Bottom screw (kw) Dimensions H2 Width, transport/operational (m) Length, transport (m) Height, transport (m) Length, operational (m) Air duct (intake/exhaust) Weight, transport (t) Tire size Equipment Hopper Detachable drawbar Grain spouts, mm Pre-cleaner 0.75 kw Digital therm. display Automation, drying Automation, cooling Filling sensor Extension of exhaust air pipe Pre-cleaner waste spout Pre-cleaner 2.2 kw Air duct shutter plates (delivered in pieces) 205 Vacboost 255 Vacboost 320 Vacboost 365 Vacboost 12MF3 22MF3 23MF3 33MF3 18,4 23,1 29,6 34,3 20,6 25,3 31,8 36,5 11,5 16,2 16,2 20, KP-26H2 KP-26H2 KP-26H2 KP-50H yes yes yes yes / / / / / / / / / / / / yes yes yes yes yes yes yes yes Ø 200 Ø 200 Ø 200 Ø 200 yes yes yes yes yes yes yes yes termost. termost. termost. termost. clock clock clock clock yes yes yes yes yes yes yes yes yes yes yes yes accessory accessory accessory accessory accessory accessory accessory accessory 11

12 Antti heaters durable and economical heater technology. The annual operating time of a dryer heater is not long, but during that short time its reliability will be put to the test. For this reason, only the very best raw materials have been selected for Antti heaters. These materials endure both high temperatures and stress caused by wide temperature fluctuations. The heaters have fireproof stainless steel combustion chambers and heat exchangers. The heat distribution in the cylindrical furnace is even. The heaters feature steplessly-operating double nozzle burners as heat sources, which are controlled by the main automation centre. Corrugated tubes and their smooth stainless easy-to-clean surfaces guarantee high efficiency, even in tough operating conditions. The large quantity of air passing through the blowers enables maximum output to be achieved. Hipress 300 Hipress 400 Hipress 1000 Vacboost Gas A

13 Vacboost 2000 Vacboost 300 Vacboost 400 Vacboost 1000 Technical specifications of the heaters Model Heat exchanger kw Oil flow (kg/h) Liquid gas m 3 /h Natural gas m 3 /h Fan Motor (kw) Air volume m 3 Length mm HIPRESS 200 A, B, C, D HIPRESS 300 A, B, C, D HIPRESS 400 A, B, C, D HIPRESS 500 A, B, C, D HIPRESS 700 AB, CD X 7, HIPRESS 1000 AB, CD X 15, HIPRESS 1200 AB, CD X 15, Height mm Depth mm Air pipe D, mm Model Heat exchanger kw VACBOOST 200 A, B, C, D VACBOOST 300 A, B, C, D VACBOOST 400 A, B, C, D VACBOOST 500 A, B, C, D VACBOOST 700 A, B, C, D X 7, VACBOOST 1000 A, B, C, D X 15, VACBOOST 2000 AB, CD X 15, x1250 Vacboost Gas direct heaters Model Heat exchanger kw Oil flow (kg/h) Oil flow (kg/h) Liquid gas m 3 /h Liquid gas m 3 /h Natural gas m 3 /h Natural gas m 3 /h Fan Motor (kw) Fan Motor (kw) Air volume m 3 Air volume m 3 Length mm Length mm Height mm Depth mm Air pipe D, mm VACBOOST GAS A700 A, B, C, D VACBOOST GAS A1500 A, B, C, D Height mm Depth mm Air pipe D, mm Duct burner series Model Max kw Dryer Length Height DB , 3, DB , 4, 6, DB , Duct burner units for dryers Duct burner is your choice for when powerful drying is needed. Ready-designed modular units for different Agrosec dryer sizes provide efficiency and economy. Duct burners use liquid or natural gas. The air intake is positioned securely at a safe height above the ground. Modules are equipped with service door. 13

14 Antti Bioheaters Economical grain drying with bioenergy Efficiency through bioenergy Antti bioheater systems allow burning of wood chips, peat, pellets, grain, sorting residues etc. Depending on the configuration and biofuel used, the Antti bioheaters power ranges from 300 to 800 kw with an efficiency of up to 89 %. An air to air heat exchanger efficient and durable Antti bioheaters are upright, which means the combustion chamber and the tubes are in a vertical position. The heater is designed for biofuels that induce a large flame. The efficiency of the air to air heat exchanger is excellent and the furnace materials withstand continuous use. Biofuel ash can be removed automatically using a screw conveyor. The Antti bioheater can be placed next to the farm s heating plant. This is a cost-effective solution because the boiler and the dryer heater can utilize the same chip storage and transfer system. Economical, fully equipped biofuel storage. Storage with spring agitator, storage screw and burner head. Automation and safety equipment included. Sizes available: 16 m 3, 22,5 m 3 and 29 m 3. Power kw Mounting Fan motor kw Air volume m 3 /h Length Width Height Air duct diameter Weight configuration mm mm mm mm kg 300 A, B, C, D 7, A, B, C, D A, B, C, D A, B, C, D A, B, C, D 2x7, Wood chip energy Furnace operating principle 14

15 Antti bioheater container affordable heating! The system is suitable for greenhouses, industrial purposes, hot air drying of grain and heating industrial facilities. The movable container is convenient and quick to set up. The burner automation has already been installed and tested in the Antti bioheatercontainer. The movable container is convenient and quick to set up and should be used away from other buildings. It has been built on a transfer base together with the fuel storage and can be easily lifted to another location. The container has also been factory tested and adjusted. Burner automation has already been installed and tested in the Antti bioheater container. All you need is a firm location, for example a concrete slab, electrical and control connections and the installation of air ducts and flues. The equipment includes a flue gas aspirator, a screw conveyor and a frequency converter for the fan. The large doors enable easy maintenance. A heater in a container that uses inexpensive bioenergy. Quick to transfer from one place to another. Container is equipped with lifting hooks and dolly hooks. Bioheater power ranges from 400 to 800 kw. The maximum drying air temperature is 100 C with a maximum increase in heat 80 C. The bioburner has been equipped with a moving grate. Suitable fuels: wood chips, sod peat, briquettes, pellets, grain and waste oduced by the precleaner mixed with wood chips. Container Storage 13 m³ Model Mounting Power Air volume Air duct Length mm Length mm Width Height mm Weigh Storage config. kw m 3 /h diam. Ømm without screw with screw mm without flue kg volume m 3 conveyor conveyor system Antti biocont 400, spring agitator D Antti biocont 500, spring agitator D Antti biocont 650, spring agitator D Antti biocont 800, spring agitator D

16 For Mixflo dyers (batch) Automatic drying is easy using Agrosec Optima Versatile and user friendly Optima control board present new thinking of easiness for grain drying. Examples of standard equipment: Smart dryer automation with touchscreen Adjustable feeder speed control Control for constant heat regulator 10 last batch duration recording Main display In addition to extensive standard equipment Optima can be customized for different customer requirements with wide variety of accessories. Drying times Examples of available accessories: Automatic filling Automatic discharge Elevator load measurement Functions With automatic filling and discharge accessories, it is possible to dry two batches totally automatic including batch change. Also twin dryer version of Optima is available. For Duoflo dryers (batch + continuous) MultiControl Protection class IP54 Filling shutter Pre-cleaner Feeder speed adj. Blower motor 5,5-15 kw Elevator motor 4,0-15 kw Pre-cleaner motor 2,2 or 4 kw Fire detection, electromechanical fire thermostat Dryer full level indication, capacitive switch Electronic elevator rev. guard Model Nom. current [In] Blowers Elevators Heaters 125A 250A 400A 125 A 250 A 400 A

17 Antti elevators the wetter the grain the better they are. Antti elevators are designed to maintain their high transfer capacity even when the grain is exceptionally moist. The spacious tip correctly formed buckets and appropriate belt speed keep the grain moving in all conditions. Their robust components and strong multi textured belts make the elevators outstandingly durable. The wear plates at the ends can be replaced if necessary. Their smooth belt pulleys prevent grain from accumulating in the pulleys and different cereals from intermixing while the adjustable scrapers keep the pulleys clean when lifting moist grain. Bottomless cup series are used in all ANTTI elevators for more transport capacity Motor operated 6-way divider Antti elevators are proven to be extremely good in practice. Only the lowest bucket of each bucket group has a bottom. As the grain column uses the empty spaces between the buckets, there is a steady, continuous flow of grain along the pipe. In addition, bottomless buckets can be completely emptied even when the grain is wet. The E-model features a direct drive with no driving belts and requires very little servicing. Motor output and elevator length Motor (kw) Length of elevator (m) E 40 E60 E80 E100 E120 Special hopper boot for higher intake capacity 3 4 5,3 7,5 9,2 11,0 15,0 11,2-15,7 16,2-20,7 21,2-26,7 27,2-34,7 11,2-14,7 15,2-19,7 20,2-26,7 27,2-32,7 33,2-34,7 11,2-14,7 15,2-19,7 20,2-24,7 25,2-29,7 30,2-34,7 11,2-11,7 12,2-16,7 17,2-19,7 20,2-23,7 24,2-34,7 11,2-13,7 14,2-16,7 17,2-19,7 20,2-26,7 17

18 Round silos for versatile storing needs Round Agrosec Silos are assembled by the customer from elements that are pre-fabricated at the factory. The erection of the silos may be carried out safely with the help of a crane and jacks, normally without any scaffolding. The manhole and the wall joint for the screw conveyor are separate components that offer alternatives for fitting out the silo, and make the erection and operation of the silo easier. The roof is joined with the wall jacket by means of a top rim and centring supports, which ensure a robust structure and that the silo and the roof are symmetric with respect to each other. The silos are available with a diameter of 5.3 or 7.5 metres. On a level foundation, the silos can also be fitted with aerator blowers, and a turning screw that empties the bottom section. If these standard solutions are not sufficient for you, the factory will be happy to advise you about larger options. D5,3m round silos layers volume m 3 height m (flat bottom) , , , , , , ,75 D7,5m round silos layers volume height m 3 m (flat bottom) , , , , ,30 18

19 Cone bottom buffer and storage silos D5.3 and D7.5 The round silos are fitted with a ventilated cone. A bolt-attached bottom cone is placed inside the flat-bottomed silo. Filling is easy and efficient. The silo is equipped with outlet air vents. Also cones without ventilation available for storing dry grain. Cone bottom angle is 28 degrees. Ventilated grain silo D5.3 of 12 layers with ventilated cone. Cone with ventilation Emptying can be done with screw or chain conveyor. Free space under shutter is 625 mm. Standard equipment Filling opening on the roof D 250 Manhole in the wall and roof Foundation slabs with expander bolts Wall ladder with safety guards Optional equipment Roof ladder with or without hand rails layers D5,3 D7,5 layers volume height m³ m volume height m³ m

20 The carefree and reliable Agrosec Conveyor with chain Wherever grain needs to be transferred in large quantities, the Antti C80 chain conveyor is the right choice for the job. This robust and resilient workhorse takes both dry and moist grain wherever it needs to be taken. Whatever the weather conditions, it will never let you down! It s transfer capacity is 80 tonnes per hour. The C80 chain conveyor can also be equipped with a return bottom, which enables the inlet and outlet openings for the grain to be chosen freely. Chain conveyor C80 Capasity 80 t/h Motor Total length (kw) (m) 3 4,4-12,1 4 13,0-18, ,7-27, ,3-37, ,9-44,6 Chain conveyor C80 dimension drawing 976 L Le 398 min min. 479 min L= Total length Le= Functional lenght 20

21 Large storage silos Agrosec Storage Pro silos Pro silos merge well into the surrounding environment, and together with other buildings, they form by appearance wellbalanced unities. There is no need for specific landscaping. The square silos are assembled from horizontally profiled elements. They are quick and straightforward to erect. The silo elements are joined together by screw attachments. Modular dimensioning increases their flexibility. Pro silos are easy to add to provide new storage space quickly. The raw material is usually steel that is surface-coated as desired by the client. Pro silos make an excellent choice for raw material silos within the industry. The end strips of the elements form an enclosed load-bearing structure with a double joint against the rainwater. The elements can be used in the outer walls if sealed with sealing mastic. A B C D E bottom silo/layers m³ m³ ,6 3, ,4 4, ,0 5, ,7 6, ,1 8,3 Pro silos - Volumes and heights Layers silo bottom 3 x 3 volume height (m 3 ) (m) silo bottom 3 x 2,5 volume height (m 3 ) (m) silo bottom 2,5 x 2,5 volume height (m 3 ) (m) silo bottom 2 x 2 volume height (m 3 ) (m) ,40 37,70 46,00 54,30 62,60 70,90 79,20 87,50 95,80 104,10 112,40 120,70 4,08 4,94 5,80 6,66 7,52 8,38 9,24 10,10 10,96 11,82 12,68 13,54 24,40 31,30 38,20 45,10 52,00 58,90 65,80 72,7 79,60 86,50 93,40 100,30 4,08 4,94 5,80 6,66 7,52 8,38 9,24 10,10 10,96 11,82 12,68 13,54 20,00 25,80 31,60 37,40 43,20 49,00 54,80 60,60 66,40 72,20 78,00 83,80 3,88 4,74 5,60 6,46 7,32 8,18 9,04 9,90 10,76 11,62 12,48 13,34 12,70 16,50 20,30 24,10 27,90 31,70 35,50 39,30 43,10 46,90 50,70 54,50 3,58 4,44 5,30 6,16 7,02 7,88 8,74 9,60 10,46 11,32 12,18 13,04 21

22 Element dryers with storage the solution for professionals Even though the most important task of the year takes just moments to complete, it can completely exhaust the person in charge. It does not have to be like this: sharing the job in hand with a reliable assistant who never gives up, helps you achieve more both in the field and beyond. The Antti element dryer with storage lives up to what it promises. It helps dry the crop impeccably, quickly and flexibly, without sacrificing quality. Antti has the stamina to stay awake on your behalf Delivery of the Antti element dryer with storage includes all the essential parts of a ready-to-operate dryer that you expect for yourself and your work. In addition to the dryer machinery, the heater and the silos, it also includes the load-bearing columns for the building, the wall elements, and for example, the stairs and the service platforms. Antti s control and monitoring automation also demonstrates the company s commitment to innovation. The available options range from the Optima control centre to the most modern Agrosec Vision system that can oversee the operation of the dryer to the extent that even batch changes may be executed without the farmer s supervision. Antti takes care of your duties around the clock reliably so that you can sleep without any worries. The 4x5 element dryer with storage viewed from the side The 4x5 element dryer with storage viewed from above 22 Volumes of the Antti element dryers with storage Model of element dryer with storage width x length/element Silo bottom used (m) Volumes of the silo groups with different numbers of element layers (m 3 ) x3 2,0 x 2, x4 2,0 x 2, x5 2,0 x 2, x5 2,0 x 2, x3 2,5 x 2, x4 2,5 x 2, x5 2,5 x 2, Also available in other sizes and heights.

23 A tailor that delivers to your measures The Antti package is really made to measure. It is designed and dimensioned just for your needs and your farm. The package includes expert advice, the buildings, all the equipment, and user training. If you are considering purchasing an Antti element dryer with storage, you only need to tell us what you want Antti will take care of the rest, making full use of its experience of many decades, state-of-the-art technology, and modern know-how and expertise. The Antti element dryer with storage not only represents quality and modern design but also merges well into the surrounding landscape: you can feel proud when operating and showcasing it. We will plan a suitable, and cost-effective solution for your farm together with you. There are as many different models as there are farmers therefore, we deliver modules individually tailored for each farmer and farm. The loading silos are fitted with hopper. Safe and easy-to-use 23

24 ANTTI-INDUSTRY LTD 24 Koskentie 89 FI KANUNKI Finland Tel Fax