slow-heating soldering irons that were the tools of his trade. The technology he

Transcription

1

2 THE WELLER D V N T G E W eller has come a long way from its humble beginnings back in 1945 when arl Weller, a home radio repairman, wasn t satisfied with the bulky, slow-heating soldering irons that were the tools of his trade. The technology he pioneered, combined with his own design ingenuity, created the first soldering gun, an invention that revolutionized the electronics manufacturing and repair industries. Today, the Weller brand is still synonymous with electronics design innovation, but in a very different way. Weller is now the most respected name in specialized soldering and desoldering products for production, rework, and repair of through hole and SMT boards, products for contact removal of Is and QFPs, non-contact hot air products, and much more. Weller s latest line of products again breaks new ground this time in the fastgrowing arena of lead-free soldering technology. Weller Silver Series stations have the power to handle the extra demands of lead-free soldering and the versatility to tackle a wide array of applications. s always, the famous Weller blue signifies products that help maximize productivity with a combination of innovation and value. See for yourself the time has never been better to get the Weller advantage.

3 O N T E N T S 4 Soldering Stations 21 Desoldering Stations 24 Rework Stations 25 Hot ir Stations 34 Fume Extraction 36 Soldering Irons 41 ordless Soldering Irons 45 Heat Guns 47 ccessories

4 SOLDERING STTIONS WD1002 DIGITL SILVER SERIES SOLDERING STTION THE WELLER DVNTGE: nother Weller breakthrough gives you two pencils in one. This powerful 80-watt pencil allows rapid production when working with lead-free solder, high mass components, and other demanding applications. special silver heating element for low thermal loss and fast recover make this unit ideal for continuous production work. nd the interchangeable barrel gives you the option of working with either a traditional length or shorter tip-to-grip. FETURES ND ENEFITS: The Silver Spool heating element provides low thermal loss and fast recovery n Modern LD technology gives the user critical information at a glance n Three freely programmable temperature preset buttons allow quick and easy temperature changes n Powerful 80-watt pencil allows rapid production when working with lead-free solder, high-mass components, and other demanding applications The following functions are built in to the WD1 power unit: n Setback time: llows programming of the number of minutes (1 99), before temperature sets back to idle mode. n Standby temperature: llows selection of desired setback temperature, down to 200 F. n Temperature lockout: llows supervisor to easily set a temperature that cannot be changed by the operator. n F/ switching: llows the temperature display to read in either F or. n Temperature offset: llows the display temperature to be adjusted +/- 72 F when working with higher mass tips, where the temperature reading can be affected by the mass of the tip. n uto-off Time: llows programming the number of minutes of inactivity (1 99), before the station powers off automatically. Optional longer barrel available Stand has a four position tilt adjustment and antistatic finish to ensure safety against electrostatic discharge. 4 See page 8 for components and specifications See page 5 for LT series soldering tips

5 TIPS LT SERIES TIPS FOR WSP80 SOLDERING PENIL TINNED WITH LED FREE SOLDER SOLDERING STTIONS HISEL at No. IN. MM IN. MM IN. MM LT LT LT LTD LTH LTK LTL LTM ROUND at No. IN. MM IN. MM LT LT1L LT1S LTS LTS LTS ENT HISEL at No. IN. MM IN. MM IN. MM LT4X LTX LTHX SINGLE FLT at No. IN. MM IN. MM LTF ENT ROUND at No. IN. MM IN. MM LT1LX LT1SLX LT1X KNIFE at No. IN. MM IN. MM IN. MM LTKN SMT LDE at No. IN. MM IN. MM IN. MM LTSMT LTSMT LTSMT

6 SOLDERING STTIONS WD1001 DIGITL SILVER SERIES SOLDERING STTION THE WELLER DVNTGE: With a tip-to-grip distance of just 37 mm, accuracy is unsurpassed. nd with the heating element built into the pencil rather than the tip, replacement tips cost substantially less when compared to systems with tip cartridges. Just 37 mm tip-to-grip, so you re close to the work. FETURES ND ENEFITS: n Super-fast heat-up and superior thermal recovery for fast efficient soldering n Tips are secured to the pencil by use of a threaded end, which eliminates the need for a barrel nut n Modern LD technology gives the user critical information at a glance n Three freely programmable temperature preset buttons allow quick and easy temperature changes The following functions are built in to the WD1 power unit: n Setback time: llows programming of the number of minutes (1 99), before temperature sets back to idle mode. n Standby temperature: llows selection of desired setback temperature, down to 200 F. n Temperature lockout: llows supervisor to easily set a temperature that cannot be changed by the operator. n F/ switching: llows the temperature display to read in either F or. n Temperature offset: llows the display temperature to be adjusted +/- 72 F when working with higher mass tips, where the temperature reading can be affected by the mass of the tip. n uto-off Time: llows programming the number of minutes of inactivity (1 99), before the station powers off automatically. Heater is integrated into the handle, so when the tip dies, the heater lives on 6 See page 8 for components and specifications See page 7 for NT series soldering tips

7 TIPS NT SERIES TIPS FOR WMP MIRO SOLDERING PENIL TINNED WITH LED FREE SOLDER SOLDERING STTIONS MIRO at No. IN. MM IN. MM NT NT1S ENT ROUND at No. IN. MM IN. MM IN. MM NT1X ROUND at No. IN. MM IN. MM NT HISEL at No. IN. MM IN. MM IN. MM NT NT NT NT NTD NTH NTK ENT HISEL at No. IN. MM IN. MM IN. MM NTX GULL WING FOR DRG SOLDERING at No. IN. MM IN. MM IN. MM NTGW

8 SOLDERING STTIONS PRODUT LINE FOUR ONFIGURTIONS TO GIVE YOU THE MOST EFFIIENT SOLUTION WD1 Single channel power unit Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 85W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 9 F (± 5 ) Temperature stability ± 10 F (± 6 ) WD2 Dual channel power unit Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 160W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 9 F (± 5 ) Temperature stability ± 10 F (± 6 ) WD1001 WD1 SINGLE channel power unit with WMP 65 Watt soldering pencil and WDH20 soldering pencil stand Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 85W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 9 F (± 5 ) Temperature stability ± 10 F (± 6 ) Stand WDH20 (Order No ) Pencil WMP WD1002 WD1 single channel power unit with WP80 80 Watt soldering pencil and WDH10 soldering pencil stand Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 85W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 9 F (± 5 ) Temperature stability ± 10 F (± 6 ) Stand WDH10 (Order No ) Pencil WP80 (Order No ) arrels Short (Included with the WP80) (Order No ) Long (Optional) (Order No ) 8

9 WD1000M MULTI-FUNTION DIGITL SOLDERING STTION WITH P INTERFE SOLDERING STTIONS THE WELLER DVNTGE: lazingly fast heat-up and ultra-fine, ultra-precise tips make this station the choice for soldering and rework on extremely close-packed boards. Just 45 mm tip-to-grip, so you re close to the work hrome plated aluminum pencil weighs just 75 g Tips have integral cool comfort grips for no-tool tip change FETURES ND ENEFITS: n Fast heat-up, thermal stability, and fine tips make it perfect for production or rework, in standard or lead-free applications n Heating element is built into the soldering tip for super-fast heat-up and recovery n When placed in the stand, pencil has auto-off, or temperature setback capability for extended tip life The following functions are built in to the WD1M power unit: n Setback time: llows programming of the number of minutes (1 99), before temperature sets back to idle mode. n Standby temperature: llows selection of desired setback temperature, down to 200 F. n Temperature lockout: llows supervisor to easily set a temperature that cannot be changed by the operator. n F/ switching: llows the temperature display to read in either F or. n Temperature offset: llows the display temperature to be adjusted +/- 72 F when working with higher mass tips, where the temperature reading can be affected by the mass of the tip. n uto-off Time: llows programming the number of minutes of inactivity (1 99), before the station powers off automatically. Simple P onnection US connector on the rear of the station allows data logging, ISO verification and station control via an external P. Free software is included. See page 12 for components and specifications See page 11 for RT series soldering tips 9

10 SOLDERING STTIONS WD2000M MULTI-FUNTION DIGITL SOLDERING STTION WITH P INTERFE ND TWO 80 WTT OUTPUTS THE WELLER DVNTGE: llows simultaneous use of both the WMRP micro soldering pencil and the new WMRT micro desoldering tweezers. n ideal package for reworking small component circuit boards. Silver buttons on the front panel indicate compatibility with silver soldering pencil (WMRP) and micro rework tweezers (WMRT). 10 FETURES ND ENEFITS: n Fast heat-up, thermal stability, and fine tips make it perfect for production or rework, in standard or lead-free applications n Heating element is built into the soldering tip for super-fast heat-up and recovery n When you place the WMRT tweezers in the WMRTH Stop+Go rest, the unit is switched off to extend tip life. The following functions are built in to the WD2M power unit: n Setback time: llows programming of the number of minutes (1 99), before temperature sets back to idle mode. n Standby temperature: llows selection of desired setback temperature, down to 200 F. n Temperature lockout: llows supervisor to easily set a temperature that cannot be changed by the operator. n F/ switching: llows the temperature display to read in either F or. n Temperature offset: llows the display temperature to be adjusted +/- 72 F when working with higher mass tips, where the temperature reading can be affected by the mass of the tip. n uto-off Time: llows programming the number of minutes of inactivity (1 99), before the station powers off automatically. See page 12 for components and specifiactions See page 11 for RT and RTW series tips oth micro size handpieces have extremely short heat-up time and optimum heat transfer capability. The micro design employs the use of tip cartridges with a twin parallel design, so the tips are always in alignment. With the WMRT, you are able to desolder very small SMD components down to 0201.

11 TIPS TIP SETS FOR WMRT SOLDERING TWEEZER Model Description Dimensions Order No. SOLDERING STTIONS RTW1 onical 0.2 mm RTW2 onical 0.7 x 0.4 mm RTW3 lade 3.0 x 0.7 mm RTW4 lade 6.0 x 0.7 mm RT SERIES TIPS FOR WMRP MIRO SOLDERING PENIL Model Description Width Thickness Order No. RT1 Needle tip RT2 Point tip Ø 0.4 mm RT3 hisel shape, straight 1.3 mm 0.4 mm RT4 hisel shape, straight 1.5 mm 0.4 mm RT5 hisel shape, bent, mm 0.4 mm RT6 Round shape, beveled, 45 Ø 1.2 mm RT7 Knife tip, mm RT8 hisel tip, straight 2.0 mm 0.2 mm RT9 hisel tip, straight 0.6 mm 0.2 mm RT10 Gull wing for drag soldering 2.0 mm 3.0 mm

12 SOLDERING STTIONS PRODUT LINE FOUR ONFIGURTIONS TO GIVE YOU THE MOST EFFIIENT SOLUTION WD1M Single channel power unit Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 85W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 17 F (± 9 ) Temperature stability ± 9 F (± 5 ) WD2M Dual channel power unit Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 160W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 17 F (± 9 ) Temperature stability ± 9 F (± 5 ) WD1000M WD1M SINGLE channel power unit with WMRP MIRO soldering pencil and WMRH soldering pencil stand Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 85W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 17 F (± 9 ) Temperature stability ± 9 F (± 5 ) Stand WMRH (Order No ) Pencil WMRP (Order No ) WD2000M WD2M DUL channel power unit with WMRP MIRO soldering pencil and WMRH soldering pencil stand, PLUS WMRT MIRO THERML TWEEZER ND WMRTH STND 12 Specifications: Voltage 120 V (input); 24 V (output) Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm) Power consumption 160W Temperature range 150 F F ( ) ESD safe Yes Temperature accuracy ± 17 F (± 9 ) Temperature stability ± 9 F (± 5 ) Stands WMRH (Order No ) WMRTH (Order No ) Pencils WMRP Micro Soldering Pencil (Order No ) WMRT Micro Tweezers (Order No )

13 OMPTIILITY MULTIPLE OPTIONS I WELLER POWER UNITS ND ESSORIES SOLDERING STTIONS WD1 WD2 WD1M WD2M WSP80 WP80 WMP WMRP WMRT WT50 WSP150 WHP80 WS80 WS150 FE

14 SOLDERING STTIONS ESSORIES MIX ND MTH TO UILD YOUR OWN USTOM SOLUTION See page 13 to determine accessory and power unit compatibility WSP80 80 WTT SOLDERING PENIL micro soldering pencil, 80 W/24V. This soldering pencil can be universally used in all situations from extremely delicate soldering to those where there is a greater temperature requirement. Use with WDH10 support (Order no ). omes with LT tip. WP80 80 WTT SOLDERING PENIL WITH SHORT GRIP (Order no ) micro soldering pencil, 80W / 24V. Similar in use and performance to the WSP80. omes with a short barrel grip so you can get close to the work. Optional longer grip (order no ) is available. Use with WDH10 support (order no ). omes with LT tip. WMP MIRO SOLDERING PENIL The 65W / 24V pencil is up to the task with superior performance for both heat-up and thermal efficiency. Suitable to handle all micro components and fine pitch tasks. The WMP provides an extremely short tip-to-grip distance. The heater is integrated into the handle. When the tip wears out, the heating element lives on. Use with WDH20 support (order no ). omes with NT1 tip. WMRP MIRO SOLDERING PENIL (Order no ) The WMRP soldering pencil has an extremely short heat-up time. ll component parts of the system, such as the sensor and heating element, are designed for optimum heat transfer. This ensures absolute efficiency in the utilization of the power provided by the power unit. hanging soldering tips is quick, easy, and requires no tools. Use with WMRH support (order no ). omes with RT3 tip. WMRT MIRO DESOLDERING TWEEZERS (Order no ) The new WMRT desoldering tweezers enables precise desoldering of very small SMD components down to The high-speed regulation of the WD1M and WD2M power units drive the tweezers. Use with WMRTH support (Order no ). For WMRT tweezers and WMRTH support in a set, order no omes with RTW2 tip set. WT50 THERML TWEEZERS (Order no ) This 50W / 24V tool is used to desolder SMD components. The tweezer has two movable heating elements so that tip alignment can be adjusted. Use with K51 support (Order no ). For WT50 tweezers and K51 support in a set, order no omes with WT1 tip sets. 14

15 SOLDERING STTIONS WSP150 HEVY DUTY SOLDERING PENIL (Order no ) This heavy duty 150W / 24V soldering pencil is used for jobs with extremely high heat requirements and large heat sinks. When operating with dual power units WD2 or WD2M, the second port is disabled. Use with PH60 support. omes with LHTF tip. vailable tips at. No. Order No. Style LHTD hisel (4.7 mm) 0.71 (1.5 mm) LHTE hisel (6.7 mm) 0.71 (1.5 mm) LHTF hisel (9.3 mm) 0.71 (1.5 mm) WHP80 PREHETING PLTE (Order no ) This 80W / 24V preheater is used with any 80W power unit. It is used to slowly increase the temperature of a P board prior to rework to minimize the risk of damaging sensitive components. Heating surface is 80 mm x 50 mm. The temperature range is adjustable from 150 F to 850 F. WS80 SOLDER TH (Order no ) The 80W / 24V solder bath is used with any 80W power unit. The solder bath is used as a rework preparation tool to tin wire ends and to clean and tin component leads. It can also be used to clean extraneous solder particles in preparation for rework. Temperature range is adjustable from 150 F to 850 F. ompatible with lead free solders. WS150 SOLDER TH (Order no ) The WS150 solder bath is ideally suited to tin coating and preparation of soldering components. The heat output is 150W / 24V and the adjustable temperature range is 150 F 999 F. When operating with dual power units WD2 or WD2M, the second port is disabled. FE75 FUME EXTRTION SOLDERING PENIL (Order no ) 80W / 24V soldering pencil with integral fume extraction assembly. ompatible with any 80 watt power unit and WFE2P self-contained fume extraction system. Temperature is adjustable from 150 F to 850 F. Includes a 5 mm cylinder brush for cleaning and a funnel for support when not in use. Uses LT series tips and comes with LT tip. 15

16 SOLDERING STTIONS WES51 NLOG SOLDERING STTION THE WELLER DVNTGE: powerful and economical continuous production soldering station, this unit has temperature limit lockout and automatic power-down features to keep you in control. Wireless lockout limits maximum temperature FETURES ND ENEFITS: n Designed for continuous production, rework, and repair of through hole, SMT boards, most ground planes, and multi-layer boards n Wireless temperature lockout prevents operator from raising temperature to levels higher than specified for the board or component n Station automatically powers down after 99 minutes of inactivity to prolong tip life and save power n Pencil is fitted with non-burnable silicone rubber cord for added safety n Pencil uses ET series tips found on page 18 Slim, comfortable pencil reduces operator fatigue omponents and Specifications: WES51PU Power Unit Voltage 120 V (input); 24 V (output) Temperature Range 350 F F ( ) Dimensions 5.9 x 4.5 x 3.6 in. (150 x 114 x 91 mm) Temperature ccuracy +/- 9 F (+/-5 ) Temperature Stability +/- 10 F (+/-6 ) ESD Safe Yes PES51 Pencil Power onsumption 50 W Heating Element Type Nichrome Wound; Fiberglass and eramic Insulated ord Length 4 ft. (1.22 m) Supplied Tip ET Supplied Stand PH50 Wireless temperature lockout gives you control over the process. 16

17 WESD51 DIGITL SOLDERING STTION SOLDERING STTIONS THE WELLER DVNTGE: powerful and economical continuous production soldering station, this unit has temperature limit lockout, automatic power-down features, and a digital display to keep you in control. Digital readout for accurate temperature control Wireless lockout limits maximum temperature Slim, comfortable pencil reduces operator fatigue FETURES ND ENEFITS: n Designed for continuous production, rework, and repair of through hole, SMT boards, most ground planes, and multi-layer boards n Wireless temperature lockout prevents operator from raising temperature to levels higher than specified for the board or component n Digital readout allows quick and accurate temperature control n Station automatically powers down after 99 minutes of inactivity to prolong tip life and save power n Pencil is fitted with non-burnable silicone rubber cord for added safety n Pencil uses ET series tips found on page 18 omponents and Specifications: WESD51PU Power Unit Voltage 120 V (input); 24 V (output) Temperature Range 350 F F ( ) Dimensions 5.9 x 4.5 x 3.6 in. (150 x 114 x 91 mm) Temperature ccuracy +/- 9 F (+/-5 ) Temperature Stability +/- 10 F (+/-6 ) ESD Safe Yes PES51 Pencil Power onsumption 50 W Heating Element Type Nichrome Wound; Fiberglass and eramic Insulated ord Length 4 ft. (1.22 m) Supplied Tip ET Supplied Stand PH50 Wireless temperature lockout gives you control over the process. 17

18 SOLDERING STTIONS TIPS ET SERIES TIPS FOR PES51 SOLDERING PENIL TINNED WITH LED FREE SOLDER THE WELLER DVNTGE: The sensor hole in the base of the tip is fitted with a stainless steel liner to prevent the tip from seizing to the sensor. SREWDRIVER at No. IN. MM IN. MM IN. MM ET* ET* ET* ETD ETH LONG SREWDRIVER at No. IN. MM IN. MM IN. MM ETJ ETK* ETL ETM NRROW SREWDRIVER at No. IN. MM IN. MM IN. MM ETR ONIL at No. IN. MM IN. MM IN. MM ETP* ETT LONG ONIL at No. IN. MM IN. MM IN. MM ETO* ETS* SINGLE FLT at No. IN. MM IN. MM IN. MM ET ET ET ETDD ETU ETV KNIFE at No. IN. MM IN. MM IN. MM ETKN * Indicates available bulk (100 multiples only)

19 WTPT TEMPERTURE ONTROLLED SOLDERING STTION SOLDERING STTIONS THE WELLER DVNTGE: Three tip-dependent temperature options provide maximum control and make this unit perfect for repetitive, basic production, rework, and repair applications. Lighted on-off rocker switch Ferromagnetic sensor in tip controls temperature FETURES ND ENEFITS: n Unique closed loop temperature control protects sensitive components n Ferromagnetic sensor in tip controls temperature, so no adjustment is required n Most tips available in three standard temperature ranges (600 F, 700 F, 800 F) for maximum control n Lighted rocker switch indicates on-off status n Pencil uses PT series tips found on page 20 omponents and Specifications: PU120T Power Unit Voltage 120 V (input); 24 V (output) Power onsumption 60 W Temperature Range 600 F F ( ) Temperature ccuracy +/- 9 F (+/-5 ) Dimensions 4.5 x x in. (114 x 150 x 91 mm) ESD Safe Yes T201T Pencil Power onsumption 42 W Heating Element Type Nichrome Wound, Plug-in ord Length 4 ft. (1.22 m) Supplied Tip PT7 Supplied Stand PH1201ESD 19

20 SOLDERING STTIONS TIPS PT SERIES TIPS FOR T201T SOLDERING PENIL TINNED WITH LED FREE SOLDER SREWDRIVER atalog Numbers IN. MM IN. MM IN. MM PTH6 PTH7 PTH PT6 PT7* PT8* PT7* PT8* PT7* PT8* PTD7 PTD8* PTE LONG SREWDRIVER atalog Numbers IN. MM IN. MM IN. MM -- PTJ7 PTJ PTK7* PTK PTL7 PTL PTM7 PTM NRROW SREWDRIVER SINGLE FLT atalog Numbers IN. MM IN. MM IN. MM PTR6 PTR7 PTR atalog Numbers IN. MM IN. MM IN. MM -- PT7 PT PT7 PT PT7 PT PTDD7 PTDD ONIL LONG ONIL atalog Numbers IN. MM IN. MM IN. MM PTP6 PTP7* PTP8* atalog Numbers IN. MM IN. MM IN. MM -- PTS7 PTS PTO6 PTO7* PTO8* ONIL FLT atalog Numbers IN. MM IN. MM IN. MM -- PTF7 PTF * Indicates available bulk (100 multiples only)

21 WDD81X DIGITL SHOP IR DESOLDERING STTION DESOLDERING STTIONS THE WELLER DVNTGE: With 80 watts of power, this shop air system handles even the heaviest ground planes and multi-layer boards quickly, reducing the risk of component damage. NEW Disposable solder trap on the DXV80 makes cleanout quick and easy FETURES ND ENEFITS: n Vacuum delay feature allows solder to reach the collection chamber before vacuum is shut off to avoid clogging n Digital process control allows exact temperature set for added control n Optional W1 control module provides temperature lock-out for process control, temperature set-back for extended tip life, and F to conversion n DXV80 pencil uses DX series desoldering tiplets found on page 22 omponents and Specifications: Power Unit Voltage 120 V (input); 24 V (output) Power onsumption 95 W Temperature Range 150 F F ( ) Dimensions 7.1 x 4.51 x 4 in. (180 x 115 x 101 mm) Pump Type ompressed air converter Vacuum Pressure 21 in. HG (0.8 ar) Temperature Stability +/- 10 F (+/-6 ) ESD Safe Yes DXV80 Pencil (Order No ) Power onsumption 80 W Heating Element Type Nichrome Wound ord Length 4 ft. (1.22 m) Supplied Tiplet DX112 Solder ollection Tubes Supplied Stand KV80 (Order No ) The new patented threadless DX desoldering tiplets will not seize to the heater. 21

22 DESOLDERING STTIONS WRS1002X DIGITL SELF ONTINED DESOLDERING STTION THE WELLER DVNTGE: With 80 watts of power, this self-contained system handles even the heaviest ground planes and multi-layer boards quickly, reducing the risk of component damage. NEW Disposable solder trap on the DXV80 makes cleanout quick and easy FETURES ND ENEFITS: n Vacuum delay feature allows solder to reach the collection chamber before vacuum is shut off to avoid clogging n Digital process control allows exact temperature set for added control n Optional W1 programming module provides temperature lock-out for process control, temperature set-back for extended tip life, and F to conversion n DXV80 pencil uses DX series desoldering tiplets found on page 23 omponents and Specifications: Power Unit Voltage 120 V (input); 24 V (output) Power onsumption 175 W Temperature Range 150 F F ( ) Dimensions 9.5 x 10.6 x 4.1 in. (241 x 269 x 104 mm) Pump Type Rotary Vane ir Flow Volume 1 l/min l/min. Temperature ccuracy +/- 50 F (+/-30 ) Temperature Stability +/- 10 F (+/-6 ) ESD Safe Yes DXV80 Desoldering Pencil (Order No ) Power onsumption 80 W Heating Element Type Nichrome Wound ord Length 4 ft. (1.22 m) Supplied Tiplet DX112 Solder ollection hamber Supplied Stand KV80 (Order No ) The new patented threadless DX desoldering tiplets will not seize to the heater. 22

23 WRS3000VX SELF ONTINED SOLDER / DESOLDER STTION DESOLDERING STTIONS THE WELLER DVNTGE: Soldering and desoldering pencils, each with 80 watts of power, make this the perfect station for demanding work on heavy ground planes and multi-layer boards. NEW Disposable solder trap on the DXV80 makes cleanout quick and easy FETURES ND ENEFITS: n Vacuum delay feature allows solder to reach the collection chamber before vacuum is shut off to avoid clogging n Microprocessor with digital read-out for complete accuracy and reliability n Higher power means less time spent on the P, reducing risk of component damage n Temperature set-back can be programmed from 5 to 60 minutes n WSP80 pencil uses LT series tips found on page 5 n DXV80 pencil uses DX series desoldering tiplets found on page 22 omponents and Specifications: WRS3000 Power Unit (Order No ) Voltage 120 V (input); 24 V (output) Power onsumption 300 W Temperature Range 150 F F ( ) Dimensions 9.5 x 10.6 x 4.1 in. (241 x 269 x 104 mm) Pump Type Rotary Vane Vacuum Pressure 20.7" (526 mm) HG ir Flow Volume 1 l/min l/min. Temperature ccuracy +/- 16 F (+/-10 ) Temperature Stability +/- 10 F (+/-6 ) ESD Safe Yes DXV80 Desoldering Pencil (Order No ) Power onsumption 80 W Heating Element Type Nichrome Wound ord Length 4 ft. (1.22 m) Standard Tiplet DX112 Solder ollection hamber Supplied Stand KV80 (Order No ) TIPS DX SERIES TIPLETS FOR DS80 ND DSV80 DX110 DX111 DX112 DX113 DX114 DX115 DX116 (O.D.) (I.D.) at No. Order No. IN. MM IN. MM IN. MM DX DX DX DX DX DX DX WSP80 Pencil Power onsumption 80 W Heating Element Type Silver Spool ord Length 4 ft. (1.22 m) Supplied Tip LT Supplied Stand WPH

24 REWORK STTIONS TIPS WT SERIES TIPLETS FOR WT50 THERML TWEEZERS TINNED WITH LED FREE SOLDER THERML TWEEZERS TIPS at No. Order No. IN. MM WT WT WT THERML TWEEZERS TIPS at No. Order No. IN. MM WT WT NOZZLES NOZZLES FOR HP1 SMLL HOT IR PENIL ROUND at No. IN. MM IN. MM ROUND ENT at No. IN. MM IN. MM SIDES HETED at No. IN. MM IN. MM SIDES HETED at No. IN. MM IN. MM FLT at No. IN. MM IN. MM DUL at No. IN. MM IN. MM

25 HOT IR STTIONS 25

26 HOT IR STTIONS WH3000PS DIGITL REWORK SYSTEM THE WELLER DVNTGE: This station has high-end versatility to meet your most demanding rework challenges, including repair of fine-pitch components on densely-packed boards. WH3000S ircuit board holder with hot air pencil stand holds the HP3 hot air pencil perpendicular to the printed circuit board under repair, raises and lowers it precisely onto the component being reworked, and swings it out of the way for access to the circuit board WH3000P 700-watt hot air station features patented Weller nozzle technology for maximum process control and user friendly operation, plus a powerful variable speed-controlled turbine for an air volume of up to 50 liters/min WH3000PS omponents & Specifications: WH3000P Power Unit Voltage 120 V (input); 24 V (output) Power onsumption 700 W Temperature Range 150 F 999 F ( ) Dimensions 9.5 x 10.6 x 6.7 in. (240 x 270 x 170 mm) Pump Type Maintenance-free Rotary Vane Vacuum Pressure -0.6 bar ir Flow Volume 5 l/min. 50 l/min. Temperature ccuracy +/- 77 F (+/- 25 ) ESD Safe Yes WH3000S ircuit oard Holder with Pivoting Holder (See Page 28 of this catalog for specifications) WHP3000 Heating Plate (See Page 28 of this catalog for specifications) 26

27 HOT IR STTIONS FETURES ND ENEFITS: n 700 watts of power allow work on larger dual in line and quad pack components n n ion trap assures that only ESD safe hot air is directed at the component n Memory space to store up to 10 thermal profiles ensures process repeatability n Holds circuit boards up to 310 mm x 320 mm for outstanding versatility n IR heating plate has a total heated area of 120 mm x 190 mm with 3 ceramic elements for controlled, even heat. n Set and actual temperatures are digitally displayed on the LD panel for added control of process n n external sensor can be connected to display actual temperatures at specific areas of the circuit under repair to further guard against damage to sensitive components n The hot plate can be controlled from its own internal control system or integrated into the control system of the WH3000P or WH3000V n For full range of hot air nozzles, see page 33 WHP3000 Positioned beneath the WH3000S circuit board holder, this IR heating plate preheats circuit board under repair to reduce possibility of thermal damage. 27

28 HOT IR STTIONS WH3000PS OMPONENTS ND ESSORIES WH3000S IRUIT ORD HOLDER WITH SWING-WY TOOL HOLDER n Holds circuit boards up to 310 mm x 320 mm for outstanding versatility n Precision glides allow board to be precisely positioned and secured at any point along the X and Y axes n ccommodates both single and double sided boards n Holds Ps totally flat for added precision and repeatability n Tool holder positions hot air pencil perpendicular to the P; smooth-acting lever raises and lowers tool precisely onto the component n Smooth-acting lever raises and lowers the HP3 hot air pencil 1.4 in. (35 mm) along the Z axis n Swing-away Stop and Go feature automatically switches hot air pencil to standby mode when holder is pivoted to the side, reducing temperature and air flow WH3000 IRUIT ORD HOLDER (not shown) Same as WH3000S, but without tool holder WHP3000 INFRRED HETING PLTE n Reduces risk of thermal damage by providing controlled, even heat n Set and actual temperatures digitally displayed for added control of process n Optional Type K thermocouple can be connected to display actual temperatures at specific areas of the circuit under repair to further guard against damage to sensitive components n an be used alone or beneath WH3000S or WH3000 circuit board holders n an be controlled independently, or can be integrated into the control system of either the WH3000P or the WH3000V omponents & Specifications WH3000S Dimensions WH3000 Dimensions 12.6 x 17.6 x 17.3 in. (320 x 446 x 440 mm) 12.6 x 17.6 x 3.9 in. (320 x 446 x 100 mm) WHP3000 Voltage 120 V Power onsumption 200 W (small heating zone); 600 W (large heating zone) Temperature Range 150 F 750 F ( ) Dimensions 10.0 x 15.6 x 2.8 in. (254 x 395 x 70 mm) ESD Safe Yes ccessories djustable circuit board stop Support for large circuit boards ircuit board clamp lamp set for irregular-shaped circuit boards (mobile phones, digital cameras, etc.) 28

29 WH3000P DIGITL HOT IR STTION HOT IR STTIONS THE WELLER DVNTGE: This 700-watt hot air station has advanced features for unsurpassed process control and a quiet, yet powerful internal air source for maximum portability. Stop and Go tool holder automatically switches hot air pencil to standby mode, reducing air flow but maintaining operating temperature FETURES ND ENEFITS: n Self-contained bench-top unit no external air source required n apable of performing demanding repair tasks on Ps with complex fine pitch surface mounted components n Set and actual temperatures are digitally displayed on the LD panel for added process control n utomatic mode allows up to ten separate programs to be stored in memory, each with a unique air temperature / air volume / process time profile for the ultimate in control and process repeatability n Special ionizing circuit assures hot air is static-free to protect sensitive components n Optional nozzle change tool allows quick changeout of nozzles, even when hot n Works with optional Type K thermocouple to measure temperature on specific area of P for more precise process monitoring n Three position foot switch: OFF HOT IR VUUM n Hot air pencil accepts wide range of patented technology nozzles for maximum versatility, see page 33 WH3000V Similar to the WH3000P, except without internal turbine air source; uses compressed air or inert gas WH3000P omponents & Specifications Power Unit Voltage 120 V Power onsumption 700 W Temperature Range 150 F 999 F ( ) Dimensions 9.5 x 10.6 x 6.7 in. (240 x 270 x 170 mm) Pump Type Maintenance Free, Rotary Vane Vacuum Pressure ar ir Flow Volume 5 l/min. 50 l/min. Temperature ccuracy +/- 77 F (+/- 25 ) ESD Safe Yes ccessories for WH3000P and WH3000V Manual control panel Nozzle change tool mm Type K external sensor mm Type K external sensor Stand for hot air nozzles 29

30 HOT IR STTIONS WH900 SELF ONTINED HOT IR REWORK STTION THE WELLER DVNTGE: The WH900 has a sensor located at the nozzle that continuously samples the temperature and instantly adjusts the heat output to maintain the temperature you ve pre-selected. So you don t have to readjust the temperature every time you change the airflow rate. Set it once and forget it. So your rework production increases and your reject rate goes down. Hot air temperature is infinitely adjustable from 100ºF to 1,000ºF (50º to 550º) ir from internal pump is infinitely adjustable from 5 L/min. to 50 L/min. Power ON/OFF switch Power-on LED indicator Hot air ON/OFF and temperature/airflow setback control FETURES ND ENEFITS: n Temperature and air flow setback can be pre-selected by the user n Sensor at the nozzle continuously adjusts heat output n Hot air hand piece uses nozzles found on page 33 Nozzle not included WH900 omponents and Specifications: Power Unit Voltage 120 V (input); 120 V (output) Power onsumption 750 W Temperature Range 150 F 1000 F or Dimensions x x 4.25 in. (206 x 168 x 108 mm) Pump Type Turbine ir Flow Volume 5 l/min. 50 l/min. Temperature ccuracy +/- 86 F (+/- 55 ) ESD Safe Yes losed-loop temperature control Yes Patented Weller nozzle technology safely removes QFPs, PGs, and SMT bases. 30

31 WRS1002 DIGITL SELF ONTINED HOT IR REWORK STTION HOT IR STTIONS THE WELLER DVNTGE: Digital microprocessor control and an internal air source give this 100-watt single channel hot air station amazing performance and versatility. Digital display shows set and actual temperatures FETURES ND ENEFITS: n Powerful (100-watt) HP1 pencil precisely delivers hot air to small SMT parts, reducing the risk of damage to adjacent components n Finger-activated hot air switch on pencil provides exceptional control n Digital temperature control has easy-to-read LED display for fast and accurate temperature set n Optional W1 programming module provides temperature lock-out for process control, temperature set-back for extended tip life, and F to conversion n Hot air pencil uses nozzles found on page 24 WRS1002 omponents and Specifications: Power Unit Voltage 120 V (input); 24 V (output) Power onsumption 100 W Temperature Range 150 F 999 F or Dimensions 4.5 x 5.9 x 3.6 in. (114 x 150 x 91 mm) ir Flow Volume 1 l/min. 6 l/min. Temperature ccuracy +/- 50 F (+/- 30 ) ESD Safe Yes HP1 Pencil Power onsumption 100 W Heating Element Type Nichrome wound; fiberglass and ceramic insulated ord Length 4 ft. (1.22 m) ESD Safe Yes Supplied Nozzle Supplied Stand PH

32 HOT IR STTIONS WD101 DIGITL SHOP IR HOT IR STTION THE WELLER DVNTGE: Digital microprocessor control and the ability to use external compressed air or gas give this 100-watt hot air station amazing performance and versatility. nalog dial for manual control of hot air flow Digital display shows set and actual temperatures FETURES ND ENEFITS: n Powerful (100-watt) HP1 pencil precisely delivers hot air to small SMT parts, reducing the risk of damage to adjacent components n Finger-activated hot air switch on pencil provides exceptional control n Digital temperature control has easy-to-read LED display for fast and accurate temperature set n Optional W1 programming module provides temperature lock-out for process control, temperature set-back for extended tip life, and F to conversion n Hot air pencil uses nozzles found on page 24 WD101 omponents and Specifications: Power Unit Voltage 120 V (input); 24 V (output) Power onsumption 100 W Temperature Range 150 F 999 F or Dimensions 4.5 x 5.9 x 3.6 in. (114 x 150 x 91 mm) ir Flow Volume 1 l/min. 6 l/min. Temperature ccuracy +/- 50 F (+/- 30 ) ESD Safe Yes HP1 Pencil Power onsumption 100 W Heating Element Type Nichrome wound; fiberglass and ceramic insulated ord Length 4 ft. (1.22 m) ESD Safe Yes Supplied Nozzle Supplied Stand PH60 32

33 NOZZLES FOR WH900 ND WH3000P HOT IR STTIONS ROUND (NO VUUM) at No. IN. MM IN. MM ROUND ENT (NO VUUM) at No. IN. MM IN. MM ROUND DUL (NO VUUM) at No. IN. MM IN. MM SIDES HETED at No. IN. MM IN. MM SIDES HETED at No. IN. MM IN. MM ROUND DUL (NO VUUM) at No. IN. MM IN. MM SF REPLEMENT RUER INSERTS at. No. W W Description Small, 3 mm Large, 6 mm ( ) Denotes Make To Order. ontact us for a quote and lead-time. 33

34 FUME EXTRTION WFE2P TWO OPERTOR FUME EXTRTOR THE WELLER DVNTGE: Quiet and efficient, this self-contained fume extraction unit handles up to two Weller fume extraction irons / stations, removing 99.9% of fumes at their source. Maintenance-free pump for extended continuous operation Efficient four-stage filter station is easily replaceable FETURES ND ENEFITS: n Self-contained bench-top unit no external air source required n ompact size for portability and small footprint n For use with Weller FE series fume extraction soldering irons n OSH ompliant WFE2P omponents and Specifications: WFE2P Self-ontained Fume Extractor (Order No ) Voltage 120 V Operator apacity 1-2 Weller FE series irons OSH ompliant Yes UL and cul Listed Yes Weight 10 lb. 12 oz. (4.9 kg) Dimensions 5.5 in. diameter x in. (140 x 289 mm) Noise Level 40 db 34

35 FE75 INTEGRL FUME EXTRTION IRON / 80 WTTS FUME EXTRTION n Fume extraction soldering pencil, 80 watts n ompatible with any WRS rework system, WSL and WSD81 soldering stations n Includes a 5 mm cylinder brush and a funnel for support when not in use n Uses LT series tips found on page 5 n Order No n Support stand K20 (Order No ) FUME EXTRTION DPTER n Fume extraction adapter for WSP80 soldering pencil n onverts WSP80 soldering pencil into a fume extraction pencil KFE11 FUME EXTRTION DPTER KIT n Fume extraction adapter kit for W100PG, WP25, WP30, WP35, W60P, T201T irons n For use with Weller Fumex system n omplete with plastic ESD tubing n Detailed operating instructions included EMFE FUME EXTRTION DPTER n Fume extraction adapter for E1302 and E1503 soldering pencils FUME EXTRTION DPTER n Fume extraction adapter for WMRP soldering pencil FUME EXTRTION DPTER n Fume extraction adapter for WP80 soldering pencil 35

36 SOLDERING IRONS PROFESSIONL SOLDERING IRONS / 25 WTT / 30 WTT / 35 WTT n Ideal for a wide variety of electronic tasks n Uses ST series long life double-coated iron-plated tips- ST3 included-see page 37 n Quick change knurled collar, stainless steel barrel n ushion grip handle and plug-in heating element n 6' 3-wire cord, iron is 7 7/8" long n UL and cul listed (120 V units only) WP25 atalog Number WP25 WP30 WP35 Description 25 watts, 120 V, 750 F Professional soldering iron, 3-wire cord 30 watts, 120 V, 800 F Professional soldering iron, 3-wire cord 35 watts, 120 V, 850 F Professional soldering iron, 3-wire cord ONTROLLED OUTPUT SOLDERING IRONS / 60 WTT / 100 WTT n Uses Weller closed loop method of controlling maximum tip temperature n Portable line voltage iron - no base station required n Stainless steel modular plug-in heater, greater efficiency and versatility n Temperature is controlled by tip (600 F, 700 F, and 800 F tips) n Nominal heat-up time with 700 F tip is 110 seconds n Uses T series tips found on page 37 n Heating element type: Nichrome wound, plug in n UL and cul listed n Fume extraction adapter kit available- at. No. KFE11 W60P W100PG atalog Number W60P W60P3 W100PG W100P3 Description 60 watts, 120 V, 700 F 2-wire soldering iron with T57 tip 60 watts, 120 V, 700 F 3-wire soldering iron with T57 tip 100 watts, 120 V, 700 F heavy duty 2-wire soldering iron with T6F7 tip 100 watts, 120 V, 700 F heavy duty 3-wire soldering iron with T6F7 tip TP12P ONTROLLED-OUTPUT FIELD SOLDERING IRON n Versatile controlled tool for field servicing n Operates from 12 volt batteries or low voltage power source n omplete with battery clips and 12' fused cord n Soldering iron comes with PT7 tip, creates 700 F temperature n UL and cul listed 36

37 TIPS ST SERIES TIPS FOR WP25 / WP30 / WP35 IRONS TINNED WITH LED FREE SOLDER SOLDERING IRONS SREWDRIVER at No. IN. MM IN. MM ST ST ST ST ST ST SINGLE FLT at No. IN. MM IN. MM ST ONIL at No. IN. MM IN. MM ST TIPS T SERIES TIPS FOR W60P ND W100P IRONS TINNED WITH LED FREE SOLDER T5 SERIES SREWDRIVER T6 SERIES SREWDRIVER 600 F 700 F 800 F 900 F at. No. at. No. at. No. at. No. FITS IRON IN. MM IN. MM - T57 T58 - W60P T58 - W60P T57 T58 - W60P T5D7 T5D8 - W60P T5E7 T5E8 - W60P T66 T67 T68 - W100P T6D6 T6D7 T6D8 - W100P T6E6 T6E7 T6E8 - W100P T6F6 T6F7 T6F8 T6F9 W100P T6G7 - - W100P

38 SOLDERING IRONS WM120 THIN SOLDERING IRON / 12 WTT n Lightweight, pencil thin soldering iron with stay-cool handle n Designed for soldering miniature components n Develops tip temperature of 800 F n 3-wire grounded plug n Uses Weller MP series auto slide-in tips n UL listed TIPS TINNED WITH LED FREE SOLDER ONIL at No. IN. MM IN. MM MP SINGLE FLT at No. IN. MM IN. MM MP STNDRD SERIES MODULR SOLDERING IRONS n Modular soldering irons utilize interchangeable handles, heaters and tips n 3-wire grounded n Uses 9800 or 8800 iron holder n UL and cul listed SL325 atalog Number SL325 SL335 SL345 SL500 Description Modular soldering iron with 7400 handle, 537S heater, PL111 tip Modular soldering iron with 7400 handle, 1237S heater, PL113 tip Modular soldering iron with 7400 handle, 4037S heater, PL133 tip Modular soldering iron with 7760 handle, 37UG heater, PL133 tip HNDLES STNDRD SERIES MODULR SOLDERING IRON HNDLES n Modular soldering irons utilize interchangeable handles n Interchangeable heaters and tips for custom applications, maintenance n Iron has 5' cord n Feature cool, soft touch, acid and flux resistant grips n Uses 8800 iron holder n UL and cul listed n 7400 and 7500 handle for SL325, SL335, and SL345 are 3-wire grounded n 7770 handle (blue) is 2-wire ungrounded 7400 atalog Number Description 7400 Standard Series modular iron handle, 3-wire standard cord 7500 Standard Series modular iron handle, 3-wire burn resistant cord 7770 Standard Series modular iron handle (lue), 2-wire standard cord 7760 Standard Series modular iron handle (Red), 2-wire standard cord 38

39 MODULR HETERS WITH INTEGRL TIP SOLDERING IRONS n Used with Standard Series modular irons SL325, SL335, SL345 and SL500 and Standard Series Handles 7400, 7500, 7760, and 7770 atalog Number Description 33 Modular heater with long chisel tip, 50 watt, 1100 F 533S Modular heater with long chisel tip, 23 watt, 800 F 1233S Modular heater with integral long chisel tip, 33 watt, 900 F 1236S Modular heater with pyramid tip, 33 watt, 900 F 4033S Modular heater with long chisel tip, 45 watt, 1000 F 4039S Modular heater with short chisel tip, 45 watt, 1100 F MODULR HETERS FOR THRED-IN ND THRED-ON TIPS n Used with Standard Series modular irons SL325, SL335, SL345 and SL500 and Standard Series Handles 7400, 7500, 7760, and 7770 THRED-IN TIPS atalog Number 535S 1235S 535S THRED-ON TIPS atalog Number 37UG 537S 1237S 4037S Description Modular heater thread-in tip, 23 watt, 700 F Modular heater thread-in tip, 33 watt, 800 F Modular heater thread-in tip, 45 watt, 900 F Description Modular heater uses thread-on tip, 50 watt, 1000 F Modular heater thread-on tip, 23 watt, 700 F Modular heater thread-on tip, 33 watt, 800 F Modular heater thread-on tip, 45 watt, 900 F HNDLES DOULE INSULTED MODULR SOLDERING IRON HNDLE n io-mechanical handle design n Has flexible heat-resistant, double insulated 2-wire cord set n Soft touch cool, molded grip for operator comfort and control n Twice the dielectric values of standard UL requirements 5550 MODULR HETERS FOR DOULE INSULTED HNDLE n Used with DI (double insulated) series 5550 two-wire handle atalog Number Description 360 Modular heater uses thread-on tip, 27 watt, 700 F 361 Modular heater uses thread-on tip, 35 watt, 800 F 362 Modular heater uses thread-on tip, 45 watt, 900 F 363 Modular heater uses integral chisel-on tip, 45 watt, 1000 F 39

40 SOLDERING IRONS TIPS PL SERIES THRED-IN STYLE TIPS FOR MODULR HETERS TINNED WITH LED FREE SOLDER PENIL at No. Type IN. MM IN. MM 100UG dapter PL331 Plated are opper Plated Plated HISEL at No. Type IN. MM IN. MM PL333 Plated are opper Plated TPERED NEEDLE at No. Type IN. MM IN. MM PL338 Plated TIPS PL SERIES THRED-ON STYLE TIPS FOR MODULR HETERS TINNED WITH LED FREE SOLDER HISEL at No. Type IN. MM IN. MM PL113 Plated PL153 Plated PL350 Plated are opper LONG TPER HISEL at No. Type IN. MM IN. MM PL133 Plated MIRO SPDE at No. Type IN. MM IN. MM PL114 Plated PENIL at No. Type IN. MM IN. MM PL111 Plated PL153 are opper PREISION at No. Type IN. MM IN. MM PL100 Plated SREWDRIVER at No. Type IN. MM IN. MM PL151 Plated STEPPED HISEL at No. Type IN. MM IN. MM PL155 Plated TPERED NEEDLE at No. Type IN. MM IN. MM PL138 Plated

41 PORTSOL 1 ORDLESS UTNE SOLDERING IRON ND KIT ORDLESS SOLDERING IRONS n atalytic converter provides a powerful yet safe flameless combustion n Gas capacity allows up to 30 minutes continuous use n Refills with butane fuel - Weller cat. no. W1 or W2 n Safety cut-off switch when cap replaced n Sturdy plastic cap fits neatly on back of tool during use n 12 soldering tip included 1 1K KIT omplete kit contains; 1 iron with 12 tip, 13 and 14 tips, sponge, case SERIES TIPS FOR 1 ND 1K SOLDERING TOOLS 1K HISEL at No. IN. MM IN. MM FINE at No. IN. MM IN. MM PORTSOL P2 SELF-IGNITING ORDLESS UTNE SOLDERING IRON ND KIT n lightweight, compact cordless butane soldering and hot air tool n Piezo ignition with push-button ease & convenience, 25 watts to 75 watts n Fast heat-up for high productivity, melts solder in less than 40 seconds n Gas capacity allows up to 1 hour of continuous use n Refills in less than 20 seconds so you can stay on the job n utomatic cut-off switch when cap replaced for safety n an be used as a mini-torch with flame tip P2 Portasol is a registered trademark of Olgesby and utler Limited P2K KIT omplete Iron and Hot ir Tool kit contains; P2 iron with soldering tip, mini blow torch tip, hot knife tip, hot air tip and deflector, sponge and tray, storage case with tool holder, and instructions PPT SERIES T I P S F O R P 2 N D P 2 K SOLDERING TOOLS P2K SINGLE FLT at No. IN. MM IN. MM PPT PPT DOULE FLT at No. IN. MM IN. MM PPT PPT

42 ORDLESS SOLDERING IRONS PORTSOL PSI100 SUPER-PRO SELF-IGNITING ORDLESS UTNE SOLDERING IRON ND KIT n Self-igniting portable butane heat tool - professional quality n Ideal for service technicians n For such uses as anti-static soldering, heat shrink and cutting rope n Features uto Switch safety shut-off, and iron plated tips n utane fuel level is visible through a window on the body of the tool n Rugged stainless-steel body provides up to 125 watts of power n djustable temperature up to 1,076 F n Operates up to 2 hours per refill n Refills with butane fuel - Weller cat no. W1 or W2 PSI100 Portasol is a registered trademark of Olgesby and utler Limited PSI100K KIT omplete kit contains: PSI100 iron with PSI1 tip, PSI3 tip, PSI9 tip, PSI10 tip, sponge, case PSI100K PSI SERIES TIPS FOR PSI100 ND PSI100K SOLDERING TOOLS SINGLE FLT at No. IN. MM IN. MM PSI PSI PSI PSI DOULE FLT at No. IN. MM IN. MM PSI PSI PSI PSI HOT IR at No. IN. MM IN. MM PSI KNIFE at No. IN. MM IN. MM PSI PREMIUM UTNE FUEL n Premium quality butane fuel n ompatible with Weller Portasol and Weller Pyropen tools n Printed in English and Spanish with operating instructions on back of can atalog Number W1 W2 Description Premium butane fuel, 2.1 oz. Premium butane fuel, 1.0 oz. 42

43 WP2 PYROPEN n Ignites with the push of a button, ideal for field service jobs n Lightweight and completely portable, ready to use in 30 seconds n Sturdy metal tank holds enough butane gas for 3 hours of operation n Temperature adjusts from 482 F to 932 F n Refills with butane fuel - Weller at. No. W1 or W2 PROFESSIONL SELF-IGNITING ORDLESS UTNE SOLDERING IRON ORDLESS SOLDERING IRONS HOT IR TIPS at No. IN. MM IN. MM WH WH HISEL TIPS TPER NEEDLE TIPS SPDE 35 at No. IN. MM IN. MM WPT PYROPEN WST2 n Lightweight mini iron n Dual function soldering iron and brazing torch n Soldering iron: 392 F F; Hot blow feature: 806 F maximum n Torch feature: 2372 F maximum n Includes soldering and hot air tips JUNIOR ORDLESS UTNE SOLDERING IRON n Refills with butane fuel - Weller cat. no. W1 or W2 TPER NEEDLE TIP at No. IN. MM IN. MM WPT WST3 PROFESSIONL n Lightweight and completely portable n Ready to use in 30 seconds n Ideal for field service jobs n Sturdy metal tank holds enough gas for three hours of operation n Temperature adjusts from 392 F F ORDLESS UTNE SOLDERING IRON n Refills with butane lighter gas - Weller cat. no. W1 or W2 at No. IN. MM IN. MM WPT WPT WPT HOT IR TIP at No. IN. MM IN. MM WH at No. IN. MM IN. MM WPT WPT NOTE: For tips used on this tool, please refer to the WP2 tool at the top of this page. WST6 JUNIOR ORDLESS UTNE SOLDERING IRON n Self-ignition finger switch - no sparklighter required n Temperature control gives you adjustment equivalent to 15 to 60 watts n Tank can hold enough gas for one hour of operation n 30 second heat-up time n Includes soldering and hot air tips n Refills with butane lighter gas - Weller cat. no. W1 or W2 T P E R N E E D L E T I P at No. IN. MM IN. MM WPT

44 ORDLESS SOLDERING IRONS ML100 MGN-LITE MINI UTNE TORH THE WELLER DVNTGE: The first micro torch engineered for performance and durability. FETURES ND ENEFITS: n Electronic trigger activates fast, reliable piezo ignition and LED work light n Integrated bright blue LED illuminates when trigger is pressed; improved visibility in low light situations n Spring loaded cap flips open the moment the trigger is pressed, providing additional wind protection. ap snaps securely closed when not in use. n Translucent body makes checking fuel level easy n djustment dial lets user control flame height and level of heat output n onvenient key chain lanyard n Weighs just 1.3 ounces and is less than three inches long n Generates a 2,400 F (1,300 ) flame that lasts up to 25 minutes on a single fuel charge n Refills quickly with Weller butane fuel cat. no. W1 or W2 n hildproof safety trigger approved by the U.S. onsumer Product Safety ommission ML200 MGN-LITE TLE TOP UTNE TORH THE WELLER DVNTGE: powerful performer in a compact package. FETURES ND ENEFITS: n Electronic trigger activates fast, reliable piezo ignition n djustable flame height n Generates a 2,400 F (1,300 ) flame that lasts up to 60 minutes on a single fuel charge n Refills quickly with Weller butane fuel cat. no. W1 or W2 n hildproof safety trigger approved by the U.S. onsumer Product Safety ommission 44

45 6966 HET GUNS LIGHTWEIGHT HET GUN 250 WTTS / 120 VOLTS THE WELLER DVNTGE: Weighing in at less than a pound, this ESD safe heat gun is perfect for repetitive or continuous use in production plants, labs, and electronics service facilities. Hot air temperature at nozzle ~ 750 F F Three-position switch HOT OFF OOL Hook for attaching to a spring balance FETURES ND ENEFITS: n Heavy duty heater and fan components for long service life n Light weight for reduced operator fatigue n Perfect for shrink tubing and vinyl/t.f.e., epoxy curing, drying, and cooling 6966 omponents & Specifications Weight 13 oz. (.368 kg) Voltage 120 V Power onsumption 250 W Temperature Range 750 F 800 F ( ) pproximate temperature at nozzle ESD Safe Yes ord Type Three-wire grounded ord Length 6 ft. (1.8 m) UL and cul Listed Yes 6966 ESSORIES atalog Number Description 6956 Reflector (.50") 6957 Reflector (1.50") 6958 Reducing affle 6964 Precision Reflector, 0.20" 6965 Heat Gun Wire Stand 45

46 HET GUNS 6970 HEVY DUTY HET GUN / 750 WTTS n Heavy-duty heat gun with long-life heater and motor n Softening and forming plastic laminates n Removing paints and finishes n Heat shrinking cables and terminals n uring epoxy and loosening adhesives n 3-wire grounded 6 power cord n Dual temperature: 1000 F (750 W) and 700 F (350 W); 3-way switch (Hi - Off - Low) n Lightweight, 28 oz. n UL and cul Listed 1095/6970 ESSORIES atalog Number Description 1080 Reducer for concentrating heat 1082 Reflector for heat shrink tubing/caps 6959 dapter for 6966 baffles for use with 1095 Gun 1085 affle kit containing Reducer, Reflector, Flame Spreader 1095 STNDRD DUTY HET GUN / 1000 WTTS n Dual temperature, economical heat gun, ideal for most heat gun applications n pplying heat shrinking products n uring epoxy and softening adhesives n Drying, thawing frozen pipes n Softening and molding plastics n Heating liquids and stripping paint n Dual temperature 1200 F (1000 W) and 790 F (400 W); 3-way switch (Hi - Off - Low) n 3-wire grounded plug 6' power cord n Lightweight, 22 oz. with cord n UL and cul Listed 46

47 ESSORIES 7805 SOLDER-OFF DESOLDERING UL n Desoldering bulb with T.F.E. tip n Facilitates accurate printed circuit repair and cleaning n May be used with soldering iron FLUX SOLVENT DISPENSERS n Flux solvent dispenser, 0.020" needle n void spills and waste and place flux precisely where needed n Squeeze bottle dispenses 1 drop of liquid through stainless steel needle n Dispenses resin, flux, and oil solvent atalog Number Description FD2 Flux dispenser, 0.020" needle FD21 Needle, 1" x 0.008" FD21D Flux dispenser, 0.008" needle, ESD Safe FD21DN Needle, 1" x 0.008", ESD Safe (10 Needles/pkg.) FD22 Flux dispenser, 0.050" needle FD2D Flux dispenser, 0.020" needle, ESD Safe FD22DN Needle, 1" x 0.050", ESD Safe (10 Needles/pkg.) FD3 Flux dispenser, Tri-Tip SRU-IT SOLVENT DISPENSERS n Distributes solvent through a nylon brush n For cleaning printed circuit boards and other connections n No mess, no waste n Dispenser holds 2 oz. atalog Number SD74 SD74H Description Scrub-it dispenser, nylon bristles Scrub-it dispenser, nylon bristles, ESD Safe 47

48 ESSORIES W2000 SOLDERING IRON NLYZER n hecks either temperature stability or absolute temperature n Portable unit with long battery life n Use contact pyrometer for monitoring stability n ccurately measures iron resistance from tip to ground post on plug n Tip to ground noise induced by iron: low level voltage measurable from working area of tip to ground Soldering iron not included P01 20 G. ONTT PYROMETER n Plugs in to W2000 analyzer n Used to monitor temperature stability K111 TYPE K THERMOOUPLE SSEMLY WITH ET TIP n onnects soldering pencil to W2000 analyzer n ompatible with PES51 soldering pencil n TINNED WITH LED FREE SOLDER K121 TYPE K THERMOOUPLE SSEMLY WITH EPH107 TIP n onnects soldering pencil to W2000 analyzer n ompatible with E1302 soldering pencil n TINNED WITH LED FREE SOLDER K181 TYPE K THERMOOUPLE SSEMLY WITH LT TIP n onnects soldering pencil to W2000 analyzer n ompatible with WSP80 soldering pencil n TINNED WITH LED FREE SOLDER K191 TYPE K THERMOOUPLE SSEMLY WITH NT TIP n onnects soldering pencil to W2000 analyzer n ompatible with WMP soldering pencil n TINNED WITH LED FREE SOLDER K1101 TYPE K THERMOOUPLE SSEMLY WITH RT4 TIP n onnects soldering pencil to W2000 analyzer n ompatible with WMRP soldering pencil n TINNED WITH LED FREE SOLDER 48

49 ESSORIES MNUL DESOLDERING PUMPS 7880 MNUL DESOLDERING PUMP n Powerful, heavy-duty, spring-loaded vacuum for complete solder removal n Design includes cushioned plunger, easy thumb activation and ribbed pencil grip n Heat resistant Teflon* tips n Replacement tip: 7882K * Teflon is a Registered Trademark of DuPont 7881 MNUL DESOLDERING PUMP n Powerful, heavy-duty, spring-loaded vacuum for complete solder removal n Design includes cushioned plunger, easy thumb activation and ribbed pencil grip n onstructed of static-dissipative material with surface resistivity of 109 ohms/sq. for component protection n Replacement tip: MNUL DESOLDERING PUMP n One hand operation with spring-loaded piston provides ESD safe, solder removing vacuum n Self-cleaning, non-clogging, static-free replaceable tip n Replacement tip: 7875 W1 SOLDERING STTION ONTROL MODULE n ompatible with WMRS, WSD81, WSD161, WSL, and WSL2 soldering stations n llows user to activate advanced features such as operator lockout, temperature offset, temperature set back, F/ switching, and temperature range window n Three digit LED display n Powered by four alkaline batteries (included) n Order No ESF120ESD IRUIT ORD VIE n Safely and securely hold circuit boards during soldering and rework applications n For holding circuit boards up to 160 x 235 MM n llows 360 degree rotation in 15 degree increments n omponents are held in place by a cushioned arm n Order No

50 ESSORIES NTI-SEIZE LURINT n Specially formulated lubricant to prevent desoldering tip thread seizure when operating at high temperatures n 1/2 ounce tube n Ideal for use at 900 F or lower SM1 SOLDER-MTE DISPENSER n Durable dispenser minimizes core solder usage n Eliminates operator downtime, provides continuous solder wire n Holds 1 pound solder spool (solder not included) WLSK200 VUUM PIK-UP PEN n For handling small electronic components n Replaceable suction cup tips n Pocket clip for portability WP1 TIP POLISHING R n leans and renews soldering tips. n Removes plastic resins, oxidation, silicone grease and other chemicals from tip. n Re-tin tip after use to prevent oxidation. WD SOLDERING DRY LENER n Safely cleans soldering tip without thermal shock. n leans tip without water with the use of a special metal wool ball. n Order No Replacement wools- Order No (2 pack) 50

51 INDEX at. No. Page No. at. No. Page No. at. No. Page No. at. No. Page No , , 22, , , , , , , , , 31, , 22, , UG S S S S... 38, UG... 38, S S... 38, S S S S... 38, , , , , K K K KFE KV , 22, K P T T T T T T5D T5D T5E T5E T T T T6D T6D T6D T6E T6E T6E T6F T6F T6F T6F T6G DX DX DX , 22, 23 DX DX DX DX DXV , 22, 23 E E EMFE ESF120ESD ET... 16, 17, 18 ET ET ET ET ET ETD ETDD ETH ETJ ETK ETKN ETL ETM ETO ETP ETR ETS ETT ETU ETV FD

52 INDEX at. No. Page No. at. No. Page No. at. No. Page No. at. No. Page No. FD FD21D FD21DN FD FD22DN FD2D FD FE , 15, 35 HP , 31, 32 K K K K K LHTD LHTE LHTF LT LT1L... 5 LT1LX... 5 LT1S... 5 LT1SLX... 5 LT1X... 5 LT4X... 5 LT... 5 LTS... 5 LTX... 5 LT...5, 14, 15, 23 LT... 5 LTS... 5 LTD... 5 LTF... 5 LTH... 5 LTHX... 5 LTK... 5 LTKN... 5 LTL... 5 LTM... 5 LTS... 5 LTSMT LTSMT LTSMT ML ML MP MP NT1... 7, 14 NT1S... 7 NT1X... 7 NT NT NT... 7 NTX... 7 NT... 7 NT... 7 NTD... 7 NTGW... 7 NTH... 7 NTK... 7 P P2K PES , 17 PH1201ESD PH , 17 PH , 31, 32 PL PL , 40 PL , 40 PL PL , 40 PL PL PL PL PL PL PL PL PPT PPT PPT PPT PSI PSI PSI PSI PSI100K PSI PSI PSI PSI PSI PSI PSI PSI PT PT , 20, 36 PT PT PT PT PT PT PT PT PT PT PT PTD PTD PTDD PTDD PTE PTF PTF PTH PTH PTH PTJ PTJ PTK PTK PTL PTL PTM PTM PTO PTO PTO PTP PTP PTP PTR PTR PTR PTS PTS PU120T RT RT RT RT , 14 RT RT RT RT RT RT RTW RTW , 14 RTW RTW SD SD74H SL , 39 SL , 39 SL , 39 SL , 39 SM ST ST ST ST ST ST ST ST T201T... 19, 35 TP12P W100P W100P W100PG... 35, 36 W W W60P... 35, 36, 37 W60P W WD W , 43, 44 W , 43, 44 WH WH3000S... 26, 27, 28 W1...21, 22, 31, 49 WD WD1... 4, 6, 8 WD1000M... 9, 12 WD , 8 WD , 8 WD1M... 9, 12, 14 WD2... 8, 15 WD2000M... 10, 12 WD2M...10, 12, 14, 15 WDD81X WDH , 14 WDH , 14 WES WES51PU WESD WESD51PU WFE2P... 15, 34 WH , 33 WH3000P...26, 27, 29, 33 WH3000PS... 26, 28 WH3000V... 27, 28, 29 WH WH WH WHP , 28 WHP , 15 WLSK WM WMP... 8, 13, 14 WMRH... 12, 14 WMRP...10, 11, 12, 13, 14, 35 WMRS WMRT...10, 11, 12, 13, 14 WMRTH... 10, 12, 14 WP , 36, 37 WP , 36, 37 WP , 36, 37 WP80...8, 13, 14, 35 WP WP WPH WPT WPT WPT WPT WPT WPT WPT WPT WRS WRS1002X WRS WRS3000VX WS , 15 WS , 15 WSD WSD , 49 WSL WSL WSP , 15 WSP , 14, 23, 35 WST WST WST WT , 24 WT WT WT WT WT , 14 WTPT

53 Notes

54 Notes

55

56 HT /MW-?????/7M/PRINTED 9/08/US OOPER NO. T , ooper Industries, LL Specifications subject to change without notice.