STILE BEAUTY AND TECHNOLOGY

Transcription

1 STILE BEAUTY AND TECHNOLOGY

2 STILE, in line with your style Designer White Bordeaux Silver Grey MODEL Nominal input kw Nominal output kw Output to the water min. / max. kw HYDRONIC PELLET FIRE SPACE HEATING APPLIANCE STILE 16 STILE 27 INFRARED REMOTE CONTROL NO STILE 16 7,3 15,5 6,6 14 4,9 10,5 STILE ,8 22 5,2 20 BIDIRECTIONAL RADIOCONTROL WEEKLY PROGRAMMER ON BOARD SMOKE DRAUGHT CONTROL PRESSURE SWITCH NO Elegant in the forms without time and in the structure in steel and crystal Appreciated in the colours as the white, the bordeaux one and the metalized grey for easy settings, in modern or classical contexts POWER SETTING ON 5 LEVELS WATER TEMPERATURE MONITORING ON DISPLAY WATER PRESSURE TRANSDUCER C.H. CIRCULATION PUMP D.H.W. PRODUCTION KIT CLOSED EXPANSION VESSEL NO Standard supplied Optional NO Not available

3 Beauty and technology STILE, the new hydronic space heater available in the powers of 16 and 27 kw opens a new course in the market of the Home furnishing Warm with performances of a true boiler and the elegance of the space heaters for inside installation. The hydronic space heaters STILE, completely automatic and programmable, are true generators of heating with which it is possible to heat the water for the C.H. system and for domestic use (STILE 27). STILE is born from the designing centre of Unical, a leader company in the construction of boilers. Particular attention has been set to the search of the maximum efficiency, large autonomy and maintenance reduction. The outer casing is the successful integration among: sides panels in steel, enamelled with thermo-resistant powders, divided in three panels easily removable, to access the inside components and the façade with crystal inserts 4 mm thick, that allows the vision of the flame. The access to the reservoir, for the recharges of the pellet, is facilitated thanks to the upper cover. The content of the reservoir: STILE 16 = 28 kg STILE 27 = 60 kg together with the considerable reduction of the consumptions, allows a notable autonomy of operation. Autonomy and efficiencies With a global efficiency up to 90%, together with the maximum autonomy of operation, it will be possible to appreciate the notable level of performance offered by STILE. Besides it is to appreciate The project, finalized to the containment of the dimensions of the pellet reservoir, guarantees an exceptional duration at continuous operation: STILE 16 up to 19 hours according to the requested temperature STILE 27 up to ca. 36 hours according to the requested temperature In the normal use, that foresees startings and standstills, the operation with modulating system will prolong notably the duration of the fuel. Automatic cleaning of the crucible After every turning off the fan works for 10 minutes or up to when the smokes temperature goes down to 75 C. In operation: STILE 16 performs the cleaning of the crucible every 45 minutes for 45 seconds. STILE 27 performs the cleaning of the crucible every 30 minutes for 60 seconds. The pellet The pellet is a natural fuel that has been submitted exclusively to a mechanical treatment for its production (EN ) and that offers important advantages: Economic, ca. 30% less expensive than the fuels of fossil origin Effortless use comfortable small bags or, for large consumptions, stocking in silo High calorific value 4,1 5,0 kwh/kg that can vary according its composition (wood essence) Small residue of ashes Highly ecological, it recovers the wastes of the working of the wood, conveniently cleaned and dried, compacted at high pressure to form small cylinders, 10 to 30 mm long and with 6 to 8 mm diameter. COSTS COMPARISON WITH DIFFERENT FUELS (for current Italian fuel costs) LPG E LIGHT OIL E NATURAL GAS E PELLET IN BULK E 550 FIREWOOD E 500 Cost in Euro to heat an apartment of 100 m 2 for 1 year (180 days / 8 hours a day) Source:

4 STILE 16 AVAILABLE COLOURS Input: 7,3 15,55 kw Nominal Output: 6,6 14 kw Global Efficiency: 90% Feeding hopper content: 28 kg Designer White Bordeaux Silver Grey Hourly pellet consumption min./max.: 1,48-3,1 kg/h Operation autonomy: up to 19 h Room sealed mode operation Dimensions: W 56 x D 61 x H 102,2h cm Remote control Weight: 200 kg

5 STILE 16 The experience dictates the detail Steel combustion chamber Heat exchanger in carbon steel, 5 mm thick, with flame shield in cast iron. Controlled combustion Room sealed forced draught with smoke temperature. It allows to get a global efficiency up to 90%. Grate in stainless steel AISI 310S for the crucible of combustion. Automatic cleaning of the brazier Cleaning of the crucible every 45 minutes for 45 seconds. Pellet reservoir of easy access, with capacity of 28 kg. Anti-clogging Pellet reservoir having loading screw with strengthened, cooled and silenced motor. Door with inserts in thermal glass in crystal 4 mm thick, that allows the vision of the flame. Practical lever type handle for closing and opening of the door. Ash drawer with fast opening Centralized ashes collecting system that carries all the combustion residues in just one and ample underlying drawer and allows an easy emptying of it. Multifunction display it allows the operation planning through 4 sensors for: pellet temperature smoke temperature water temperature room temperature. Infrared radio control It remote controls the functions of the appliance Built-in expansion vessel and pump Easy access for inspection and maintenance, thanks to the side, vertical sliding panels. Adjustable feet

6 Technology and design panel board pellet tank cover C.H. flow heat exchanger scraping pellet tank system heat exchanger room temperature sensor combustion chamber feeding screw flame shield pump C.H. return feeding screw motor expansion vessel pellet feeder duct combustion crucible combustive air inlet smokes outlet ash drawer fan Structure in carbon steel 5 mm thick Vertical water pipes type heat exchanger Combustion circuit with forced modulating ventilation Burner constituted by the original crucible with grate in stainless steel AISI 310 S. Operating system The flame is developed in the steel combustion chamber; the produced heat frontally licks up the heat exchanger and then, coming down, crosses the special rear pockets completing the circuit. Subsequently, the fan sucks the exhausted smokes carrying them to the chimney. This system of room sealed forced draught with recovery of the smokes temperature maintains unchanged the combustion values for a global efficiency of 90%. The ignition system, activates an incandescence resistance, making the ignition fully automatic also with pellet of not good quality. Through the temperature sensor and the programmed microprocessor, the quantity of pellet, necessary to satisfy the needs of the heat, is automatically dosed thanks to the motorized feeding screw. The control s equipment adjusts the speed of the fan for the combustive air with electronic modulation. As the temperature approaches the planned values, the fan speed, and therefore the supplied power, is automatically reduced to the next lower level (among the 5 available levels), to assure the best combustion, the optimization of the consumptions and, accordingly, the high performance of the appliance.

7 STILE 16 Total safety STILE 16 is equipped with the followings devices in order to guarantee the maximum safety: Fan rotation speed control: it prevents the operation in case of faults in the smoke circuit or defected fan. Smokes temperature sensor: it checks the maximum efficiency of the appliance through the continuous control of the smoke temperature. Boiler water temperature sensor: it prevents the boiler exceed the temperature of 85 C. General safety thermostat: fitted to the pellet reservoir it detects possible anomalies of temperature >85 C. It stops the feeding of the fuel. Intervention of the safety pressure switch: in case of chimney obstruction it stops the feeding of the fuel. Safety valve: it protects the boiler and the installation system from exceeding the pressure of 2.5 bar. Water pressure transducer: it protects the operation of the appliance in case of lack of water in the system. Black-out: it controls the lack of tension. If the interruption of tension has been shorter than 20 seconds, STILE 16 is automatically restored to the normal operation. The panel board temperature increase menu temperature reduction The panel board of STILE 16 allows to plan: room temperature boiler water temperature daily, weekly and weekend programming times 5 levels of power clock display ON/OFF and reset button power reduction power increase temperature reduction power reduction ON/OFF button temperature increase power increase The management software, once depressed the switching button and accordingly to the programmed times, it will automatically program the lighting of the appliance. After the starting phase, STILE 16 will work to reach the programmed water temperature and when the 50 C are attained the central heating circulation pump will start. The clear diagnostic of the panel board will indicate possible working anomalies. The radio control, standard supplied, will allow to control the appliance from remote, regulating the operation temperature and output. Easy inspection Easy access for inspection and maintenance, thanks to the top cover horizontally sliding (fig. 1), that allows to remove the side panels on both sides of STILE 16 (fig ).

8 The integral Unical systems The alternative Energies division of Unical is at disposal of the planners for consultation, planning and studying of the best solutions of integral systems for the energetic saving. From the most simple to the most complex, for getting the maximum benefit. In the following example, STILE 16 1 transmit his thermal energy to a special heat accumulator with coil 2 for the production of domestic hot water/heating water. On the same accumulator, managed by the solar controller 8, the solar panels 3 furnish the possible captured energy. Through the thermal module M3000S 5 it is possible to exploit the energy accumulated in the Puffer to contemporarily heat a low temperature floor heating system 6 and a radiator heating system 7. Electronic Chrono-thermostats and external temperature sensor constantly check the level of comfort in each condition STILE 16 2 HEAT ACCUMULATOR TANK-IN-TANK 3 SOLAR COLLECTORS KIT 4 SOLAR EXPANSION VESSEL 5 THERMAL MODUL M3000S 6 FLOOR HEATING SYSTEM 7 HIGH TEMPERATURE HEATING SYSTEM 8 SOLAR CONTROLLER 9 SOLAR CIRCULATION GROUP 10 D.H.W. MIXER

9 STILE 16 Dimensions Key: 1 - Panel board 2 - Front door provided with thermal glass 3 - Lower cleaning door 4 - Main switch with connecting plug 5 - Room temperature sensor 6 - Manual reset safety thermostat (Water) 7 - Manual reset safety thermostat (Smokes) T1 - Central heating flow (R 3/4) T2 - Central heating return (Rp 1) T3 - Chimney connection (Øe 80) T4 - Air intake connection (Øe 45) T5 - Room thermostat connection Technical data Model STILE 16 Powers INPUT kw 7,3 15,55 NOMINAL OUTPUT kw 6,6 14 NOMINAL OUTPUT to the water min. / max. kw 4,9 10,5 Efficiency GLOBAL EFFICIENCY % 90 Combustion and Hydraulic Performances PELLET CONSUMPTION min. / max. kg/h 1,48 3,1 PELLET RESERVOIR CONTENT kg 28 AUTONOMY at nominal / minimum capacity h 9 / 19 SMOKE TEMPERATURE max. C 180 SMOKES MASSIC FLOW RATE g/s 10,2 MINIMUM RECOMMENDED DRAUGHT Pa 10 CO % <0,04 WATER SIDE PRESSURE LOSSES * m c.a. 0,3 MAXIMUM WARMABLE VOLUME * * m MAXIMUM WORKING PRESSURE bar 2,5 APPLIANCE WATER CONTENT l 10 Power supply ABSORBED ELECTRIC POWER at starting / to regime W 574/224 Dimensions and Weight HEGHT mm 1022 WIDTH mm 560 DEPTH mm 677 WEIGHT kg 200 STILE 16 is delivered with the casing already fitted and ready to be installed, directly on the floor, because endowed with self supporting frame. * Pressure losses corresponding to flow rate relevant to a Dt of 15K. * * Values calculated for a building heat losses of 35 W/m³. The a.m. data are indicative. The results have been obtained using certified pellet according to DIN 51731, DIN plus and ÖNORM M Emissions and efficiency: according to EN

10 STILE 27 AVAILABLE COLOURS Input: 8 27 kw Nominal Output: 6,8 22 kw Global Efficiency: 85% Feeding hopper content: 60 kg Hourly pellet consumption min./max.: 1,65-5,62 kg/h Operation autonomy: up to 36,4 h Room sealed mode operation Dimensions: W 61 x D 70,3 x H 139 cm Weight: 290 kg Designer White Bordeaux Remote control Silver Grey

11 STILE 27 The experience dictates the detail Steel combustion chamber Heat exchanger in carbon steel, 5 mm thick, with flame shield in cast iron. Controlled combustion Room sealed forced draught with smoke temperature. It allows to get a global efficiency up to 85%. Grate in stainless steel AISI 310S for the crucible of combustion. Automatic cleaning of the brazier Cleaning of the crucible every 30 minutes for 60 seconds. Pellet reservoir of easy access, with capacity of 60 kg. Anti-clogging Pellet reservoir having loading screw with strengthened, cooled and silenced motor. Door with inserts in thermal glass in crystal 4 mm thick, that allows the vision of the flame. Practical lever type handle for closing and opening of the door. Bidirectional remote control with back lighted display It allows the operation planning and managing of STILE 27 according to the comfort and the saving. Detects and send the room temperature to STILE 27. Ash drawer with fast opening Centralized ashes collecting system that carries all the combustion residues in just one and ample underlying drawer and allows an easy emptying of it. Built-in expansion vessel and pump Adjustable feet D.H.W. production kit (optional) For a high domestic hot water production: 10 l/min with a Dt of 30K.

12 Technology and design upper inspection pellet tank cover emergency console cleaning system pellet tank smoke pipes heat exchanger combustion chamber feeding screw feeding screw motor pellet feeder duct combustion crucible pump C.H. return C.H. flow upper ash pit lower ash pit combustion air inlet smokes outlet expansion vessel fan Structure in carbon steel 5 mm thick. Smoke pipes type heat exchanger. Double controlled combustion that assures a high efficiency thanks to the injection of primary and secondary air in the crucible. Burner constituted by the original crucible with grate in stainless steel AISI 310 S. Refined electronics. System of operation The elevated output derives from the double thermal exchange technology. To facilitate the combustion and the reduction of the pressure losses of the hydraulic circuit it has been adopted a smoke pipes structure. Insofar, the warm gases produced in the combustion chamber, with a run at inverted U, they lick up first frontally the heat exchanger and then, crossing the smoke pipes, its rear part, guaranteeing the elevated efficiency of 85%. The smoke pipes are endowed with helicoidal springs that have the double function, of turbulators and cleaning scrapers, through a practical shacking mechanism. The down stream fan, develops the double function of air suction and smokes evacuation. As the temperature approaches the planned values, the fan speed, and therefore the supplied power, is automatically reduced to the next lower level (among the 5 available levels), to assure the best combustion, the optimization of the consumptions and, accordingly, the high performance of the appliance. The operation management is completely automatic through the pre-adjusted parameters.

13 STILE 27 Total safety STILE 27 is equipped with the followings devices in order to guarantee the maximum safety: Fan rotation speed control: it prevents the operation in case of faults in the smoke circuit or defected fan. Smokes temperature sensor: it checks the maximum efficiency of the appliance through the continuous control of the smoke temperature. Boiler water temperature sensor: it prevents the boiler exceed the temperature of 85 C. General safety thermostat: fitted to the pellet reservoir it detects possible anomalies of temperature >85 C. It stops the feeding of the fuel. Intervention of the safety pressure switch: in case of chimney obstruction it stops the feeding of the fuel. Safety valve: it protects the boiler and the installation system from exceeding the pressure of 2.5 bar. Water pressure transducer: it protects the operation of the appliance in case of lack of water in the system. Black-out: it controls the lack of tension. If the interruption of tension has been shorter than 20 seconds, STILE 27 is automatically restored to the normal operation. The radio control The operation of STILE 27 is managed by the bidirectional radio control with back lighted display that sends to STILE 27 the detected room temperature and allows to plan: room temperature boiler water temperature daily, weekly and weekend programming times 5 levels of delivered output clock The radio control allows, furthermore, to: get access to a series of technical under-menus, protected by access code, allowing to completely program the appliance recognize the signalling of 12 possible anomalies for a quick restoration. Display Decrease Increase ON/OFF button Menu access/datum storage Back/Boiler water temperature setting Output setting/ Menu sliding Room temperature setting (slide menu) The management software, once depressed the switching button and accordingly to the programmed times, it will automatically program the lighting of the appliance. After the starting phase, STILE 27 will work to reach the programmed water temperature and when the 50 C are attained the central heating circulation pump will start. The clear diagnostic of the radio control will indicate possible working anomalies. Easy inspection Easy access for inspection and maintenance, thanks to the top cover horizontally sliding (fig. 1), that allows to remove the side panels on both sides of STILE 27 (fig ).

14 The integral Unical systems The alternative Energies division of Unical is at disposal of the planners for consultation, planning and studying of the best solutions of integral systems for the energetic saving. From the most simple to the most complex, for getting the maximum benefit. In the following example, STILE 27 1 transmit his thermal energy to a special heat accumulator with coil 2 for the production of domestic hot water/heating water. On the same accumulator, managed by the solar controller 8, the solar panels 3 furnish the possible captured energy. Through the thermal module M3000S 5 it is possible to exploit the energy accumulated in the Puffer to contemporarily heat a low temperature floor heating system 6 and a radiator heating system 7. Electronic Chrono-thermostats and external temperature sensor constantly check the level of comfort in each condition STILE 27 2 HEAT ACCUMULATOR TANK-IN-TANK 3 SOLAR COLLECTORS KIT 4 SOLAR EXPANSION VESSEL 5 THERMAL MODUL M3000S 6 FLOOR HEATING SYSTEM 7 HIGH TEMPERATURE HEATING SYSTEM 8 SOLAR CONTROLLER 9 SOLAR CIRCULATION GROUP 10 D.H.W. MIXER

15 STILE 27 Dimensions Key: 1 - Emergency console 2 - Front door provided with thermal glass 3 - Lower cleaning door 4 - Main switch with connecting plug 5 - Radio control reception antenna 6 - Room thermostat connection 7 - Manual reset safety thermostat (Water) 8 - TManual reset safety thermostat (Pellet) T1 - Central heating flow (R 3/4) T2 - Central heating return (R 1) T3 - Chimney connection (Øe 100) T4 - Air intake connection (Øe 80) T5 - Safety valve discharge connection Technical data Model STILE 27 Powers INPUT kw 8 27 NOMINAL OUTPUT kw 6,8 22 NOMINAL OUTPUT to the water min. / max. kw 5,2 20 Efficiency GLOBAL EFFICIENCY % 85 Combustion and Hydraulic Performances PELLET CONSUMPTION min. / max. kg/h 1,65 5,62 PELLET RESERVOIR CONTENT kg 60 AUTONOMY at nominal / minimum capacity h 10,7 / 36,4 SMOKE TEMPERATURE max. C 180 SMOKES MASSIC FLOW RATE g/s 20 MINIMUM RECOMMENDED DRAUGHT Pa 10 CO % <0,04 WATER SIDE PRESSURE LOSSES * m c.a. 0,3 MAXIMUM WARMABLE VOLUME * * m MAXIMUM WORKING PRESSURE bar 2,5 APPLIANCE WATER CONTENT l 35 D.H.W. PRODUCTION (1) l/min 10 Power supply ABSORBED ELECTRIC POWER at starting / to regime W 395/250 Dimensions and Weight HEGHT mm 1400 WIDTH mm 610 DEPTH mm 705 WEIGHT kg 290 STILE 27 is delivered with the casing already fitted and ready to be installed,irectly on the floor, because endowed with self supporting frame. Ed. n 1-06/2013 cod * Pressure losses corresponding to flow rate relevant to a Δt of 15K. * * Values calculated for a building heat losses of 35 W/m³. The a.m. data are indicative. The results have been obtained using certified pellet according to DIN 51731, DIN plus and ÖNORM M Emissions and efficiency: according to EN (1) The production of A.C.S. depends on the operation of the C.H. pump; this is inhibited up to the attainment of the water temperature, in the appliance, of 40 C. Over this threshold it is necessary to consider the necessary time so that the water s temperature in the appliance reaches such a degree to allow the heat exchange through the plates heat exchanger. You must also consider a pressure loss due to the heat exchange; insofar the outlet temperature from the D.H.W. heat exchanger will be, with the appliance fully operating and with a water temperature of 80 C, at a continuous drawing of 10 litres per minute, of around 40 C with an inlet cold water of ca. 10 C.

16 AG S.p.A casteldario - mantova - italy - ph fax export@unical-ag.com - Unical AG declines any liability for the inaccuracies that may appear due to errors in transcription or printing. It also reserves the right to introduce those modifications to its products that it considers necessary or useful, without compromising the essential characteristics of the said products.