NEW. 5 yrs Compressor Warranty. air/waterheat pump. class A++ AWH V5+ 9 kw, 11 kw, 13 kw and 20 kw

Transcription

1 NEW n Integrated air/waterheat pump n Energy efficiency class A++ n Most saved energy per invested Euro 5 yrs Compressor Warranty AWH V5+ 9 kw, 11 kw, 13 kw and 20 kw Economic and effective air-to-water heat pump for the Nordic climate Automatic start in case of a power failure Heat pump operates in conditions of up to 25 C Adjustable speed compressor from Panasonic Reasonable price and short payback period Nano-coated evaporator Dockable solution Developed in Sweden Designed for the world

2 V5+ air-to-water heat pumps. Economic, comfortable and environment-friendly. Now four versions with different power output 9kW, 11kW, 13 kw and 20 kw Save on your heating costs by adding the heat pump to your existing heating system. Do not throw away your old boiler save it as a peak demand backup reserve of a modernised system. AWH has been designed for connecting to the existing heating devices; if necessary, the heater will support the heat pump. The design of the indoor unit is stylish and compact, which makes it easy to install to limited space. The indoor unit is equipped with a circulation pump, heat exchanger and heat pump control system. For Nordic climate The split system with complete winter equipment means that the heat exchange process with the building s heating system takes place indoors and only the refrigerant circulates outdoors. This is an effective and reliable solution in our Nordic climate. Thanks to the inverter control, the heat pump automatically switches to optimal power to satisfy your heating demand, given the outdoor temperature. Top quality defrost nano-coated outdoor unit Large volume of air circulates the out- door unit, which is used in collecting energy; therefore ice forms on the outdoor unit s heat exchanger. The ES defrost programme has been designed to melt the ice only when necessary and only for the necessary period of time. The surface of the outdoor unit s heat exchanger has been coated with nanoparticles to prevent ice formation and increase effectiveness. If the capacity is correct, the ES air-to-water heat pump system will considerably reduce the fuel consumption of the previous heating device (oil, electricity, wood, gas or pellets). Complete heat control The heat pump consists of three parts: The V5+ series has a build-in control system with variable water 1. Outdoor unit, which houses the Panasonic high- quality compressor. The dockable solution means that the heat pump can be connected temperature based on the outdoor to the other heating device, which 2. Indoor unit, which houses the heat temperature. The colder the is capable of ful lling the heat exchanger, heat pump control outdoor temperature is, the higher demand alone. device and circulation pump. the temperature is in the heating If the heat pump is capable of system. This function increases the efficiency, since the heat pump doesn t produce warmer water than needed in order to keep the indoor temperature. 3. Refrigerant tubes, which connect the indoor and outdoor unit. Under normal circumstances the heat pump capacity should be enough to provide half of the necessary fulfilling half of the heat demand on the coldest days, then it is usually capable of fulfilling % of the heat demand on every day of the year. heat on the coldest days. Model AWH9-V5+ AWH11-V5+ AWH13-V5+ AWH20V5+ Max. Heating Capacity (1) kw 10,10 11,5 12,6 20,2 Max. Cooling Capacity(3) kw 6,84 9,2 10,3 12,6 Max. Heating Capacity(2) kw 9,53 10,7 11,5 19,06 C.O.P Min./Max.(1) W/W 4.02 / / / /4.65 Energy Class A++ A++ A++ A++ SCOP - Average climate low temperature W/W 3,99 3,92 3,9 3,73 Heating Power Input Min./Max.(1) W 975/ / / /4300 Heating power input Min./Max.(2) W 1230/ / / /5980 Defrost upon demand Yes Yes Yes Yes Heating cable for defrosting Yes Yes Yes Yes Compressor pre-heat Yes Yes Yes Yes Electronic expansion valve Yes Yes Yes Yes A-class circulation pump Yes Yes Yes Yes Compressor Type-Quantity/System Panasonic Twin Rotary /1 Panasonic Twin Rotary /2 Quantity Fan Airflow m3/h Rated power W Noise Level Heat Exchanger Allowable Water Flow Dimension (L D H) Indoor/ Outdoor Type Water Pressure Drop db (A) 43/62 45/65 46/65 35/66 Plate Heat Exchanger Plate Heat Exchanger Plate Heat Exchanger Plate Heat Exchanger kpa Piping Connection Inch 3/8 ~ 1/2" 3/8 ~ 1/2 3/8 ~ 5/8 3/8 ~ 1/2 Min. /Rated./ Max. L/S 0.26 / 0.43 / / 0.52 / / 0.61 / /0.79 /0.95 Outdoor Unit mm 934x354x x414x x460x x412x1440 Indoor Unit mm 380x256.7x x275x835 Net Weight Outdoor Unit Kg 62, Indoor Unit Kg Outdoor Temp. range Heating C -25~45 Cooling C 0~55 Inlet water temp. range C 10~50 Residual current device and overvoltage protection Required Power supply, grounded V/Hz/A 230 V, 50 Hz, 16 A 230 V, 50 Hz, 16 A 230 V, 50 Hz, 230 V, 50 Hz, A A x 2 Article number package Article number indoor/outdoor / / / / (1) Heating condition: water inlet/outlet temperature: 30 C/35 C, Ambient temperature: DB 7 C /WB 6 C (2) Heating condition: water inlet/outlet temperature: 40 C/45 C, Ambient temperature: DB 7 C /WB 6 C (3) Cooling condition: water inlet/outlet temperature: 23 C/18 C, Ambient temperature: DB 35 C /WB24 C Mar 2018 Energy EMEA Save Head Nordic Office: AB Nitgatan NRG Awareness, Alingsås, Unit 8, Little Sweden Island Tel: Industrial +46 (0) Estate, 50 Ballytrasna, info@energysave.se Little Island, Co. Cork Tel: +353 (0) info@nrgawareness.com

3 NRG air-to-water pumps ES air-to-water heatheat pumps have have been been designed using newest technology! designed using thethe newest technology! NEW! es eri Product s V5 e rformanc Better pe ciency and effi AWH 9 kw V5 & AWH 11 kw V5 5-ytey faorrthe Economic and effective air- warran r compresso to-water heat pump for the Nordic climate! n Automatic start in case of a power failure n Heat pump operates in conditions of up to 25 C n Adjustable speed compressor from Panasonic n Reasonable price and short payback period n Nano-coated evaporator n Built-in 3 kw heater and external heat source control n Dockable solution

4 V5 air-to-water heat pumps. Economic, comfortable and environment-friendly. The V5 series includes the advanced models of previous popular models, now available in two versions with different power output: AWH 9kW-V5 and AWH 11kW-V5 Save on your heating costs by adding the heat pump to your existing heating system. Do not throw away your old boiler save it as a peak demand backup reserve of a modernised system. AWH has been designed for connecting to the existing heating devices; if necessary, the heater will support the heat pump. The design of the indoor unit is stylish and compact, which makes it easy to install to limited space. The indoor unit is equipped with a circulation pump, heat exchanger, heat pump control system and ventilation. The heat pump features a 3 kw electric heating element to provide extra power during periods when the heat pump requires backup. For Nordic climate The split-system with complete winter equipment means that the heat exchange process with the building s heating system takes place indoors and only the refrigerant circulates outdoors. This is an effective and reliable solution in our Nordic climate. Thanks to the inverter control, the heat pump automatically switches to optimal power to satisfy your heating demand, given the outdoor temperature. Top quality defrost nano-coated outdoor unit Large volume of air circulates the outdoor unit, which is used in collecting energy; therefore ice forms on the outdoor unit s heat exchanger. The ES defrost programme has been designed to melt the ice only when necessary and only for the necessary period of time. The surface of the outdoor unit s heat exchanger has been coated with nanoparticles to prevent ice formation and increase effectiveness. The heat pump consists of three parts: Outdoor unit, which houses the highquality compressor from Panasonic. Indoor unit, which houses the heat AWH 9kW - V5 Maximum heating power W W Maximum cooling power W W Coefficient of performance (COP) Energy class A A Total power consumption cooling W W Total power consumption heating W W AWH 11kW - V5 Operating temperature range -25 C C -25 C C Defrost upon demand Yes Yes Heating cable for defrosting Yes Yes Compressor pre-heat Yes Yes Electronic expansion valve Yes Yes A-class circulation pump No Yes - Halm Indoor unit heat exchanger Tube-in-shell Plate - GEA Heating system connection G1 G1 Built-in electric heater, 3 kw Yes Yes Compressor Panasonic Twin Rotary Inverter Panasonic Twin Rotary Inverter Indoor/outdoor unit noise level 29 db(a) / 54 db(a) 29 db(a) / 55 db(a) Indoor/outdoor unit weight 26 kg / 62,5 kg 28 kg / 70 kg Refrigerant pipe diameter R410A - 3/8-1/2 R410A - 3/8 - ½ Indoor unit dimensions, L x W x H 414 x 220 x 520 mm 414 x 220 x 720 mm Outdoor unit dimensions, L x W x H 934 x 354 x 753 mm 1044 x 414 x 763 mm Supply voltage, grounded 230 V, 50 Hz, 16A x V 50 Hz, 16A x 2 Residual current device and overvoltage protection Required Required Indoor unit RSK code (quick fitting)* Outdoor unit RSK code (quick fitting)* Indoor unit RSK code (flare fitting) exchanger, 3 the kw electric heating element, heat pump control device and circulation pump. Refrigerant tubes, which connect the indoor and outdoor unit. Under normal circumstances the heat pump capacity should be enough to provide half of the necessary heat on the coldest days The dockable solution means that the heat pump can be connected to the other heating device, which is capable of fulfilling the heat demand alone. If the heat pump is capable of fulfilling half of the heat demand on the coldest days, then it is usually capable of fulfilling 80 90% of the heat demand on every day of the year. If the capacity is correct, the ES air-to-water heat pump system will considerably reduce the fuel consumption of the previous heating device (oil, electricity, wood, gas or pellets). Outdoor unit RSK code (flare fitting) *) Models with quick fittings require an installation kit which is available in lengths of 3, 4 and 7 metres (RSK codes: , , ) The company is not responsible for any typographical errors. Energy Save EMEA Nordic Head AB Office: Kristineholmsvägen NRG Awareness, 26B Unit SE-441 8, Little 39 Alingsås Island Industrial Tel: Estate, 50 Ballytrasna, info@energysave.se Little Island, Co. Cork Tel: +353 (0) info@nrgawareness.com

5 NRGESair-to-water heatpumps pumps with air-to-water heat with integrated water been integrated watertanks tankshave have been designed using technology! designed usingthe thenewest newest technology! NEW! es eri Product s V5 e rformanc Better pe ciency and effi 5-ytey faorrthe warran r compresso AWT 6 kw V5 & AWT 11 kw V5 Economic and effective air-to-water heat pump for the Nordic climate! n Automatic start in case of a power failure n Heat pump operates in conditions of up to 25 C n Adjustable speed compressor from Panasonic n Reasonable price and short payback period n Integrated solution

6 V5 air-to-water heat pumps. Economic, comfortable and environment-friendly. The NRG ES series heat pump models with integrated water tanks are are available in in two versions with a a different power power output: output: AWT AWT 6kW-V5 6kW-V5 and AWT and 11kW-V5 AWT 11kW-V5 The model AWT (Air-Water- Tank) is meant for replacing the existing heating boiler or for switching cost-efficiently and economically from direct electric heating to water heating. The indoor unit includes a 200 litre water tank which has been equipped with electric heating elements, tap water heat exchange coils, heat pump control device and heat exchanger. The indoor unit also houses the compressor and fan. This solution is meant for heating a typical house and providing hot tap water by utilizing modern cost-efficient heat pump technology. The electric heating elements are for maintaining the water temperature in the tank, if necessary. For Nordic climate AWT 6 V5 Maximum heating power 6000 W W Coefficient of performance (COP) Energy class A A AWT 11 V5 Heat pump s power consumption W W Total power consumption W + 1,7 kw + 6 kw W + 1,7 kw + 6 kw Operating temperature range -25 C C -25 C C Defrost upon demand Yes Yes Heating cable for defrosting Yes Yes Compressor pre-heat Yes Yes Electronic expansion valve Yes Yes Indoor unit heat exchanger Tube-in-tube Plate - GEA Compressor Panasonic Rotary Inverter Panasonic Twin Rotary Inverter Indoor unit noise level 35 db(a) 35 db(a) Outdoor unit noise level 46 db(a) 55 db(a) Indoor unit weight 120 kg 130 kg Outdoor unit weight 33 kg 70 kg Refrigerant pipe diameter R410A - 1/4-1/2 R410A - 3/8 - ½ Indoor unit dimensions, L x W x H 600 x 600 x 1552mm 615 x 600 x 1780mm Outdoor unit dimensions, L x W x H 780 x 255 x 590 mm 1044 x 414 x 763 mm Supply voltage, grounded 230 V, 50 Hz, 16A 230 V, 50 Hz, 16A Supply voltage of the electric 2 6 kw heating element, grounded Supply voltage of the electric 2 6 kw heating element, grounded The split-system with complete winter equipment means that only the refrigerant circulates outdoors, which is an effective and reliable solution in our Nordic climate. Thanks to the inverter control, the heat pump automatically switches to optimal power to satisfy your heating demand, given the outdoor temperature. A system easy and simple to install The 60 cm wide indoor unit fits well into the room and is suitable for a modern space. All connections are located on the top of the device, which facilitates installation and gives the device a discreet and clean appearance. Under the chassis, the tank is insulated with PUR foam to minimize heat loss. The heat pump will supply the home with cheap heating and tap water during the heating season; during the rest of the year, the heat pump will provide very low cost tap water. 200 litres, stainless steel 200 litres, stainless steel Tap water heating Coils, stainless steel Coils, stainless steel 400 Volt, 50 Hz 400 Volt, 50 Hz Residual current device and overvoltage protection Required Required Indoor unit article (quick fitting) * ** Outdoor unit article (quick fitting) * ** Indoor unit article (flare fitting) Outdoor unit article (flare fitting) Top quality defrost nano-coated outdoor unit A large volume of air circulates the outdoor unit, which is used in collecting energy; therefore ice is formed on the outdoor unit s heat exchanger. The ES defrost programme has been designed to melt ice only when necessary and only for the necessary period of time. The surface of the outdoor unit s heat exchanger has been coated with nanoparticles to prevent ice formation and increase effectiveness. The heat pump consists of three parts: Outdoor unit, which houses the high-quality compressor from Panasonic. Indoor unit, which houses the heat exchanger, 200 litre water tank, electric heating elements and heat pump control device. Refrigerant tubes, which connect the indoor and outdoor unit. *) Model AWT 6 kw with quick fittings requires an installation kit which is available in lengths of 3, 4 and 7 metres (articles: , , ) **) Model AWT 11kW with quick fittings requires an installation kit which is available in lengths of 3, 4 and 7 metres (articles: , , ) The company is not responsible for any typographical errors. Energy EMEA Save Head Nordic Office: AB Kristineholmsvägen NRG Awareness, Unit 26B 8, 441 Little 39 Alingsås Island Industrial Tel: Estate, 50 Ballytrasna, info@energysave.se Little Island, Co. Cork Tel: +353 (0) info@nrgawareness.com

7 NRG Series ES fanfan coilcoil FCFFCF Series NEW! eries product s FCF nce performa Increased ciency and effi Fan Coil Convector FCF-series Economical and efficient fan coil designed optimal indoor climate. n Easy to set up with with user-friendly remote n Works both for cooling and for heating n High performance even at low temperatures n Increases the efficiency of a hydronic heating system

8 FCF fan coils. Economic, comfortable and good for the environment. Developed using the latest technology. A fan coil can be easily described as a high efficiency water heater with built-in fan. The hot / cold water from eg an ES multifunction tank or other heat source heat radiator element and the fan then blows out warm / cold air in the house. The fan coil unit also increases the efficiency of a hydronic heating system. High capacity For those who have a house with directacting electric radiators and therefore lacks a waterborne distribution system, the fan coil units a very good option when you convert the heating system to water heat together with for example a heat pump. It is generally considerably cheaper and more efficient to install a few pieces of fan coils in the housing instead of installing traditional radiators. The capacity of a fan coil is usually considerably higher than a conventional radiator in relation size. The placement of a fan coil is important for energy savings. They should be placed in a well-chosen spot in the house which allows the heat to circulate efficiently and to maximize savings. The optimal placement is in ground floor main room, usually living room, open to the hallway, dining area and any staircase to upstairs. ES Fan Coils are configured to easily replace an existing radiator. The units can be hung directly on the wall or stand on the floor. The pipes to the fan coil can be concealed and connections can be made behind or at the base of the unit, the flexible connecting hose makes it easy to adjust the fan coil low and high heat levels. User remote ES FCF convectors have an intuitive remote control where it is easy to change settings such as set temperature and fan speed. FCF series have a very low noise level. Combining units for maximum effect FCF series can withstand water temperatures of up to 70 degrees Celsius and a major advantage is that the units deliver extremely good heat even at low water temperatures. In combination with heat pump, this is a major benefit, when lower flow temperatures in the heating system results in higher efficiency of the heat pump. Model FCF W-V2 FCF W-V2 FCF W-V2 FCF W-V2 Type Floor Floor Floor Floor (a) Coolig capacity kw Water flow I/h Water pressure drop kpa (b) Heating capacity kw Water flow I/h Water pressure drop kpa (c) Heating capacity kw Water amount I/h Water pressure drop kpa Water amount I Max working pressure bar Water connection tum G1/2 G1/2 G1/2 G1/2 Highest airflow m3/h Lowest airflow m3/h Power supply, grounded V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 Max current A Max power W (e)max noise level db(a) (e)min noise level db(a) Length mm Height w/o feet mm Depth mm Net weight kg (a) Cooling: Water out 7/12 C; Room temperature DB/WB 27/19 C. (c) Heating 70 C, room tempetature 20 C. (b) Heating water temp. 50 C vattentemperatur 50 C, rumstemperatur 20 C. (e) Noise level tested according to EN12102:2008 och ISO3745:2012. Energy EMEA Save Nordic Head AB Office: Kristineholmsvägen NRG Awareness, 26B Unit SE-441 8, 39 Little Alingsås, Island Sweden Industrial Tel: +46 Estate, Ballytrasna, 50 info@energysave.se Little Island, Co. Cork Tel: +353 (0) info@nrgawareness.com

9 ES Multifunction TankTank NRG Multifunction - Tank Tank for forall allyour your heating sources heating sources! igh NinEingW the h Comb perature m e t w lo and heating MWT kw and MWT kw 300 or 500 litre insulated for domestic heating and domestic water heating. n Solar collector 10 or 15 meters n The tank has 2 number meters DHW coils. n Electric heater 3kW n Connector for additional immersion heater n Very well insulated n Suitable for all heat sources n 1/2 R50 sockets for electric heater n Tank in stainless steel n 1 connections

10 V5 air / water heat pumps. Economic, comfortable and good for the environment. ES NRG multifunction tank is is designed with latest technology and is is very well insulated to meet maximum energy savings. By connecting an ES air / water heat pump to an ES Multi Function tank MWT or MWT the customer has a very modern energy systems, where the ES Multi functional tanks becomes the central hub for a modern heating system. The tank s dual domestic hot coils, totaling 40 m, the customer gets a very cost-effective heating system that includes both domestic hot water and domestic heating. An existing boiler can be used as supplementary backup using the multifunction tank provides multiple connection options. Future-proofed energy Through all possible combinations becomes ES multi tank technology is the future-proof energy efficient solution: Prepared tank for solar heating via pre-assembled solar coils. Prepared for existing and future energy efficient heat sources through numerous connection possibilities in the tank. Designed with the latest technology and all tanks are very well insulated to provide maximum energy savings Thermostatically controlled immersion heater Multi-functional tank has a thermostatically controlled immersion heater of 3 kw marketing from C, which increases DHW temperature. The electric heater placement in top of tank allows it to operate independently of other heat sources connected to the tank and is a backup supply that has the function to ensure that the temperature at the top of the tank is high enough to deliver higher temperature domestic hot water. Electric heater in the top of the tank is not adapted to cover the entire heating needs of your waterborne heating system. The tank is adapted to the building s total heat demand. The ES Multi-functional tank stores the energy efficiently from the building s heat sources and helps to reduce consumption for domestic heating as well as domestic hot water ES Multi-functional Tanks also provide the option of adding one, or two, strategically positioned auxiliary R50 immersion heater in the tanks tank s middle and lower sections, of up to 9 kw. This can account for additional capacity if required along with the customers existing heat source. Quick facts Multifunction tanks can be used to connect a variety of sources such as; Water-jacketed stove cooking boiler, air/water heat pumps. Decreases the consumption of both Heating and domestic hot water. High grade insulation contributes to minimal heat loss Additional energy efficient rumen ekällor can later be connected to further reduce heating costs and in needs increase capacity Accesories MWT kw MWT kw Max water pressure 10 Bar 10 bar Max water temperature 95 degrees C 95 degrees C Volume 300 litres 500 litres Height 1560mm 1850mm Diamater 630mm 700mm Inner tank and coils Stainless steel 304 og 316 Stainless steel 304 og 316 External shell Stainless steel 304, painted Stainless steel 304, painted Insulation Polyurethane Polyurethane 100mm Polyurethane 70mm Weight 95Kgs 120kgs Solar Coil Stainless Steel 304 Stainless Steel 304 Solar coil length 10m 15m Solar coil capacity 3KW 4.5KW Domestic hot water coil 1 and 2 quality Stainless Steel 304 Stainless Steel 304 Domestic hot water coil 1 and 2 length 20m+20m 20m+20m Domestic hot water coil 1 and 2 capacity 13KW 13Kw Electric element 3KW 3KW Part No ETW12-PRV-PM-AV Expansion tank 12 litre enclosure, 2.5 bar valve, pressure gauge, air vent ETW18-PRV-PM-AV Expansion tank 18 litre enclosure, 2.5 bar valve, pressure gauge, air vent EH 4,5-HPC/MT, 230/400v Immersion heater R50, 4.5kW, 230/400V 3 phase, vp-styring and thermostat EH 6,0-HPC/MT, 230/400v Immersion heater R50, 6kW, 230/400V 3 phase, vp-styring and thermostat EH 9,0-HPC/MT, 400V Immersion heater R50, 9kW, 230/400V 3 phase, vp-styring and thermostat Energy EMEA Save Nordic Head AB Office: Kristineholmsvägen NRG Awareness, 26B Unit SE-441 8, 39 Little Alingsås, Island Sweden Industrial Tel: +46 Estate, Ballytrasna, 50 info@energysave.se Little Island, Co. Cork Tel: +353 (0) info@nrgawareness.com

11 NRG fan coil wall-fcw series ES fan coil wall - FCW series NEW! eries product s FCW nce performa Increased fficiency and e Fan Coil Convector FCW series Economical and efficient fan coil designed optimal indoor climate. n Easy to set up with with user-friendly remote n Works both for cooling and for heating n High performance even at low temperatures n increases the efficiency of a hydronic heating system.

12 FCW fan coils. Economic, comfortable and good for the environment. Developed using the latest technology A fan coil can be easily described as a high efficiency water heater with a built-in fan. The hot/cold water from for example an ES multifunction tank or other heat source, heats or cools the radiator element and the fan then blows out warm/cold air into the house. The fan coil unit also increases the efficiency of a hydronic heating system. High capacity For those who have a house with direct delivery electric radiator system and which lacks a waterborne distribution system, the fan coil units are a very good option when you convert the heating system to water heat together with for example a heat pump. It is generally considerably cheaper and more efficient to install a few fan coil units in the building instead of installing traditional radiators. the capacity of a fan coil is usually considerably higher than a conventional radiator in relation to size. The placement of a fan coil is important for energy savings. they should be placed in a well-chosen spot in the house which allows the heat to circulate efficiently and to maximise savings. The optimal placement is in ground floor main room, usually living room, open to the hallway, dining area and any staircase to upstairs. ES Fan Coils are configured to easily replace an existing radiator. The units can be hung directly on the wall or stand on the floor. The pipes to the fan coil can be concealed and connections can be made behind or at the base of the unit, the flexible connecting hose makes it easy to adjust the fan coil low and high heat levels. User remote ES FCW convectors have an intuitive remote control where it is easy to change settings such as set temperature and fan speed. FCW series have a very low noise level. Combining units for FCW series can withstand water temperatures of up to 70 degrees Celsius and a major advantage is that the units deliver extremely good heat even at low water temperatures. In combination with heat pump, this is a major benefit, when lower flow temperatures in the heating system results in higher efficiency of the heat pump. Model FCW 12.1 FCW 18.1 Typ Väggmodell Väggmodell (a) Kylkapacitet kw (b) Värmekapacitet kw Maximalt arbetstryck bar Anslutning vatten tum G1/2 G1/2 Högsta luftflöde m3/h Elanslutning V/ph/Hz 230/1/50 230/1/50 Maximal effektförbrukning W Ljud db(a) Dimensioner mm 890X280X X315X210 Vikt - netto kg (a) Kyla: Vatten ut 7/12 C; Rumtemperatur DB/WB 24/17 C. (b) Värme, vattentemperatur 60 C, rumstemperatur 20 C. Energy EMEA Save Head Nordic Office: AB Kristineholmsvägen NRG Awareness, Unit 26B 8, 441 Little 39 Alingsås Island Industrial Tel: Estate, 50 Ballytrasna, info@energysave.se Little Island, Co. Cork Tel: +353 (0) info@nrgawareness.com