TANDEM TANDEM. Premium concealed runners for wood drawers.

Transcription

1 TANDEM TANDEM Premium concealed runners for wood drawers

2 TANDEM never fails to impress 2

3 For every drawer the right solution TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since first making drawer runners in the early 1960 s. The first time you open and close a fully loaded drawer, you ll quickly realize that TANDEM plus BLUMOTION is a runner system that is unmatched in quality, style and running action. Contents 6 TANDEM overview 7 Testing standards 12 General specifications 14 Using TANDEM concealed runners 16 TANDEM partial extension runners 20 TANDEM plus full extension runners 30 Inset drawers 32 Narrow drawers 34 Roll-out shelf 35 Bottom mount drawer 36 SPACE CORNER 38 TIP-ON for TANDEM plus 40 ORGA-LINE 50 Locking devices 52 Rear attachment options 54 Accessories 56 Assembly aids 58 Assembly, removal and adjustment 59 Part number index 3

4 TANDEM plus BLUMOTION 4

5 BLUMOTION inside Create unlimited solutions that excite customers and increase the value of the cabinets you offer. With TANDEM plus BLUMOTION concealed runners, all the customer sees is the beauty of the wood drawers and the quality of motion they have come to expect from Blum products. TANDEM plus BLUMOTION concealed runners are made in the USA at our North Carolina facility. This is just one example of Blum s commitment to manufacturing in the US, for the US. TANDEM plus BLUMOTION is mounted discreetly beneath the drawer and has the quietest opening and closing action available. This top-of-the-line concealed runner is the industry choice for dovetail drawers in high-end cabinetry, in either face frame or panel. TANDEM plus BLUMOTION Made in the USA 5

6 TANDEM overview Drawer length Partial extension Full extension Full extension with BLUMOTION Heavy duty full extension with BLUMOTION Max. drawer thickness Max. drawer thickness Max. drawer thickness Max. drawer thickness 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 9" TANDEM plus 12" BLUMOTION 15" TANDEM TANDEM 562H TANDEM plus plus 18" 552H TANDEM 562H 562F 562H and 21" 552F " 27" 30" Capacity dynamic/static TANDEM plus BLUMOTION 562F TANDEM plus BLUMOTION 568H and /100 lb 110/125 lb TANDEM plus BLUMOTION 568F and 568A Drawer components Rear mounting brackets (face frame 552/562 only) Locking devices Runners NOTE: Rear mounting brackets used for frame applications Standard lengths 12" 15" 18" 21" 24" 27" 30" 33" 9" 12" 15" 18" 21" 24" 27" 30" TANDEM series runners are based on the American standard 3" cabinet depth system, therefore, the runner lengths come in 3" increments. TANDEM plus runners are available for drawers from 9" 30" in length. Subject to technical modifi cations without notice

7 Testing standards i Testing standards Blum, Inc. is ISO 9001 certifi ed which means that you are assured of consistent quality in every Blum product. All Blum runners must pass these tests without showing a measurable reduction in performance or deviation in adjustment position. Testing standards vary between products and applications. All Blum runners meet or exceed ANSI/BHMA grade 1 requirements. Contact your local Blum representative for more details. Dynamic wear test Static load test Side pressure test lb lb lb 100,000 open/close cycles with a total load of 75 lb on 552/562 or 110 lb TANDEM 568 runners. 10 times for 10 seconds each time when completely extended, 66 lb is applied to the corner of the drawer front of a fully loaded drawer. 10 times for 10 seconds each time when completely extended, 44 lb is applied to the side of the drawer front of a fully loaded drawer. > General information All Blum hardware undergoes strict quality control procedures through all stages of production. Blum hardware is designed for cabinets and cabinet components made from wood, melamine or MDF. Careful attention must be paid to installation and operating instructions when using Blum hardware (see catalogs and instruction sheets for all technical information). The manufacturer must decide on the screws or attachment methods to suit the material being used (i.e. wood, melamine, etc.). The hardware must not be exposed to acidic or corrosive materials (i.e. some household cleaning solutions). To ensure that Blum hardware functions correctly, it must be kept clean and undamaged. For any additional information please contact your Blum representative. Anyone selling Blum hardware must ensure that their customer is aware of any relevant information given in this catalog. Conditions of sale and delivery All deliveries and services are based on the general conditions of sale which are available upon request. The technical presentations and dimensions in illustrations are non-binding. We reserve the right to make changes to specifi cations at any time. We do not accept any responsibility for any errors which may occur in the production of this catalog. 7

8 Endless possibilities BLUMOTION TANDEM plus BLUMOTION combines the smooth running action of TANDEM with the silent close of BLUMOTION, providing a quiet closing action for all runner lengths. BLUMOTION adapts to different loads and closing forces to give a smooth, quiet close every time. Whether it is a small top drawer or loaded deep drawer, TANDEM plus BLUMOTION guarantees the perfect motion you have come to expect from Blum. BLUMOTION inside SERVO-DRIVE SERVO-DRIVE is an electrical opening assist for TANDEM and TANDEMBOX. Drawers open automatically with just a touch of the drawer front or with a light pull of the handle. This unique feature is based on an electrical drive that, once activated, opens the drawer for you. Existing cabinets can be easily retrofi tted with SERVO-DRIVE. No modifi cations to the drawer system are necessary when upgrading. With SERVO-DRIVE, the drawer is not connected to the drive unit. This enables the drawer to be stopped at any position, providing you full control. SERVO-DRIVE inside 8

9 DYNAMIC SPACE A new kitchen standard For most households, buying a kitchen is a major investment. Education is an important element in decision making whenever considering a large purchase. The intent of DYNAMIC SPACE is just that, to teach the idea of quality of space and quality of motion. DYNAMIC SPACE is a concept of kitchen zones that take into account storage needs, organizational requirements, workfl ow and ergonomics. Quality of space Quality of motion Blum's goal with DYNAMIC SPACE is to create a new kitchen standard that provides improved utilization of space and better quality of motion. DYNAMIC SPACE is available to anyone and includes knowledge from years of research in kitchens all over the world. Learn more at 9

10 ORGA-LINE Ergonomic organization When planning a new kitchen or simply remodeling an existing one, many aspects have to be taken into consideration. Factors such as the size of your household and your individual lifestyle defi ne your personal needs. Most new kitchen buyers want more storage space and organization in their kitchens. That is why Blum continues to develop solutions for storage. The entire contents of the drawer can be seen and easily accessed, providing improved function and enhanced ergonomics in everyday use with full extension. This storage space can be customized to individual needs using the ORGA-LINE adjustable organization system. 10

11 ORGA-LINE for TANDEM offers endless possibilities for manufacturers and cabinet makers alike. Kitchen buyers are demanding good looks, more storage, better access and smooth motion. Blum delivers a wide variety of solutions that will inspire them. 11

12 General specifi cations Complete runner system Zinc-coated steel Concealed roller carriage with permanently lubricated synthetic rollers BLUMATIC spring-loaded self-closing action 552 series partial extension 562 series full extension with or without BLUMOTION 568 series with BLUMOTION H and. series for drawers up to 5/8" material thickness F and A series for drawers up to 3/4" material thickness Drawer components NOTE: Illustration is for 552/562 H/F only. For 562. and 568 the cabinet must be blocked-out behind the face frame to support heavy duty applications. Rear mounting brackets (face frame 552/562 H/F only) Locking devices Zinc die-cast with synthetic, spring-loaded release levers Captive right device and ±1/16" self-adjusting tolerance on left device Self-adjusting drawer length tolerance Tool-free drawer height adjustment Special locking devices are available for narrow drawers, inset drawers and interior roll-outs Locking devices NOTE: Rear mounting brackets used for frame applications only Runners Rear mounting options Zinc-coated steel brackets or nylon sockets Depth and side-to-side self-adjustment Installation Removal One runner for all applications TANDEM runners are designed for the American 3" increment cabinet depth system. This feature permits overlay or inset applications to use the same runner. Full length runners make installation in panel or face frame cabinets possible. BLUMOTION TANDEM plus runners are available with or without BLUMOTION. The BLUMOTION mechanism takes control of the drawer and brings it to a soft, quiet close every time. Load capacities* 75 lb dynamic, 100 lb static for TANDEM 552 and TANDEM plus 562 series 110 lb dynamic, 125 lb static for TANDEM plus 568 series Place drawer on runners and close. Locking devices automatically connect to runners. Height adjustment Squeeze orange release levers on locking devices 2 Pull drawer out and up Tilt adjustment *As per ANSI/BHMA grade 1 specifi cations on a 21" length runner. 1 2 Press up on adjustment tab Push toward back of drawer Maximum 3 (1/8") rise of drawer front. 1 Rotate the tilt adjustment lever on the rear of each runner to tilt the top of the drawer front forward. Tool-free tilt adjustment +5 mm. Subject to technical modifi cations without notice

13 i Locking devices Locking devices allow easy insertion and removal of drawers. Rear mounting options For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. page 50 page 52 TANDEM template A required assembly aid for the boring of TANDEM locking devices and rear hooks. page 56 Height compatible concealed runner systems TANDEM plus The full extension TANDEM plus runners establish the standard mounting location used for all Blum concealed runners. TANDEM Partial extension TANDEM 552 series runners have a stamped positioning tab that raises the mounting holes to the same height. SOLO Partial extension SOLO 262 series runners have positioning dimples that raise the mounting holes to the same height. 37 (1-7/16") 14 (9/16") 13 (1/2") 37 (1-7/16") 14 (9/16") 13 (1/2") 37 (1-7/16") 14 (9/16") 13 (1/2") The mounting position allows drawer fronts to be attached in the same position. Dimensions in millimeters (inch equivalents as noted) 13

14 Using TANDEM concealed runners i Step 1 Measure cabinet opening These measurements are needed to determine drawer box size. Panel cabinet depth Frame cabinet depth ht. ht. width width Step 2 Select TANDEM runners Based on the application, choose the TANDEM runner that fi ts the desired extension, drawer side thickness, load capacity and cabinet depth. Then go to the corresponding catalog page for more specifi c information. Partial Full Full extension Heavy duty full extension extension extension with BLUMOTION with BLUMOTION Drawer length Max. drawer thickness Max. drawer thickness Max. drawer thickness Max. drawer thickness 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 5/8" 3/4" 9" TANDEM plus 12" BLUMOTION TANDEM TANDEM TANDEM 15" 562H plus plus TANDEM plus BLUMOTION 18" TANDEM 562H 562F 562H and 552H 562F TANDEM TANDEM 21" 552F 562. plus plus 24" BLUMOTION BLUMOTION 27" 568H and 568F and A 30" Capacity dynamic/static 75/100 lb 110/125 lb Step 3 Preparing drawer boxes Build drawers according to the specifi cations given for the TANDEM runners you chose and the measurements determined in Step 1. Install appropriate locking devices and bore holes to accept rear hooks. Step 4 Attach runners to cabinet Using the mounting information given for the TANDEM runners you chose, mount the TANDEM runners in the cabinet. Step 5 Insert drawers Place the drawer on the runners and close. The locking devices automatically engage with the runners. Make height and tilt adjustments if necessary. Subject to technical modifi cations without notice

15 Drawer preparation i Rear notching Dimensions Option no notching 13 (1/2") 33 (1-5/16 ) Drawers must be notched in the back to accommodate TANDEM runners. The notches must be fl ush with the drawer sides and bottom. NOTE: TIP-ON for TANDEM plus requires 86 (3-3/8") notch page 39 Make the back panel shorter and extend the drawer bottom to the back of the drawer. Rear boring Dimensions 7 (9/32") Ø6 x 1 0 bo r e f or hook 11 (7/16 ) 13 (1/2 ) Drawers must have 6 mm holes drilled in the back panel to accept the hooks in the back of TANDEM runners. Boring TANDEM boring template 6 mm bit with stop collar page 56 1 Place the template over the drawer side 2 Position the template so that the center rib rests against the inside face of the drawer side 3 Set stop collar on 6 mm bit so that it will bore 10 (3/8") deep 4 Hold template fi rmly and bore hole 5 Repeat on other side NOTE: Using the T template is highly recommended Locking devices Attachment 2.5 mm bit with extension chuck TANDEM boring template page 56 Screws 612TH Locking device 1 Position the 2.5 mm drill bit into the extension chuck so that it extends 10 (3/8") out of the template 2 Place template into the front corner of the drawer 3 Bore two holes and repeat on other side 4 Attach locking devices with #6 x 1/2" truss head screws (612TH) NOTE: Mounting screws must go in at a precise angle and locking device must fi t fl ush to drawer bottom to ensure proper function of the complete drawer system NOTE: Using the T template is highly recommended Dimensions in millimeters (inch equivalents as noted) 15

16 TANDEM 552H partial extension drawer runners Overlay application Description Basic components Partial extension concealed drawer runners For 16 (5/8") max. drawer side thickness Zinc-coated steel runners Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 75 lb Static load capacity of 100 lb Locking device Rear mounting brackets for face frame only Runner Other applications Inset drawer pg. 30 Narrow drawer pg. 32 Roll-out shelf pg. 34 Bottom mount pg. 35 Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM 457 (18") 381 (15") 98 (3-7/8") 552H3810N 533 (21") 457 (18") 97 (3-13/16") 552H4570N 610 (24") 533 (21") 119 (4-11/16") 552H5330N NOTE: These runners are for 16 (5/8") max. drawer side thickness 707N HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and side-to-side self-alignment Zinc-coated steel NOTE: See page 52 for other options Non-handed bracket TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

17 Extension Partial Max. drawer material 16 (5/8") Dynamic load capacity 75 lb Static load capacity 100 lb Drawer and cabinet specifications Front view Drawer back preparation inside Inside cabinet cabinet opening width width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 10 bo r e f or hook drawer width 11 (7/16") 13 (1/2") System or #7 wood screws page (1-7/16") 21 (13/16") 13 (1/2") drawer bottom recess drawer side thickness maximum 16 (5/8") drawer height maximum = opening minus 20 (13/16") 14 (9/16") bottom clearance Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width opening 21 (13/16") minimum rear notch Rear mounting bracket (13/16") (1-1/4") 21 (13/16") 14 (9/16") Face frame rail 12 (15/32") NOTE: For use in frame applications, minimum three screws per bracket Face frame stile Runner mounting specifications Rear mounting bracket B A Runner close-up 612TH 9 (11/32") 37 (1-7/16") 10 (3/8") 33 (1-5/16") 6 (1/4") 9.5 (3/8") 9 (11/32") NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities runner length inside cabinet depth 4 (5/32") setback 25 (31/32") 37 (1-7/16") *NOTE: For panel applications the fi rst screw location is always 37 (1-7/16") Inside cabinet depth with TANDEM Drawer length bracket Runner length Screw locations for panel cabinets Maximum Minimum A B 552H3810N 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16") 552H4570N 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16") 552H5330N 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8") Dimensions in millimeters (inch equivalents as noted) 17

18 TANDEM 552F partial extension drawer runners Overlay application Description Partial extension concealed drawer runners For 19 (3/4") max. drawer side thickness Zinc-coated steel runners Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 75 lb Static load capacity of 100 lb Basic components Locking device Rear mounting bracket for face frame only Runner Other applications Inset drawer pg. 30 Narrow drawer pg. 32 Roll-out shelf pg. 34 Bottom mount pg. 35 Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM 533 (21") 457 (18") 97 (3-13/16") 552F4570N 610 (24") 533 (21") 119 (4-11/16") 552F5330N NOTE: These runners are for 19 (3/4") max. drawer side thickness 707N HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and side-to-side self-alignment Zinc-coated steel NOTE: See page 52 for other options Non-handed bracket TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

19 Extension Partial Max. drawer material 19 (3/4") Dynamic load capacity 75 lb Static load capacity 100 lb Drawer and cabinet specifications Front view Drawer back preparation inside Inside cabinet cabinet opening width width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 10 bo r e f or hook drawer width 11 (7/16") 13 (1/2") System or #7 wood screws page (15/16") drawer side thickness maximum 19 (3/4") drawer height maximum = opening minus 20 (13/16") opening height 21 (13/16") minimum rear notch Rear mounting bracket 21 (13/16") 37 (1-7/16") 13 (1/2") bottom recess 14 (9/16") bottom clearance (13/16") (1-1/4") Face frame stile Calculating outside drawer width For drawer side thickness 19 (3/4") 18 (23/32") 17 (21/32") 14 (9/16") Face frame rail 12 (15/32") Deduct from inside cabinet width 11 (7/16") 13 (1/2") 14 (9/16") Example: For 21" inside cabinet width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width NOTE: For use in frame applications, minimum three screws per bracket Runner mounting specifications Runner close-up Rear mounting bracket B A 612TH 9 (11/32") 37 (1-7/16") 10 (3/8") 33 (1-5/16") 6 (1/4") 9.5 (3/8") 9 (11/32") NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities runner length inside cabinet depth 4 (5/32") setback 25 (31/32") 37 (1-7/16") *NOTE: For panel applications the fi rst screw location is always 37 (1-7/16") TANDEM Drawer length Inside cabinet depth with bracket Runner length Screw locations for panel cabinets Maximum Minimum A B 552F4570N 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16") 552F5330N 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8") Dimensions in millimeters (inch equivalents as noted) 19

20 TANDEM plus 562H full extension drawer runners Overlay application Description Full extension concealed drawer runners Available with integrated BLUMOTION For 16 (5/8") max. drawer side thickness Rear tilt adjustment Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 75 lb Static load capacity of 100 lb Basic components Locking device Runner Other applications Inset drawer pg. 30 Narrow drawer pg. 32 Roll-out shelf pg. 34 Bottom mount pg. 35 ORGA-LINE pg. 40 Deep drawer pg. 48 Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM plus TANDEM plus BLUMOTION BLUMOTION inside 305 (12") 229 (9") 16 (5/8") 562H2290B (15") 305 (12") 24 (15/16") 562H3050C 562H3050B 457 (18") 381 (15") 14 (9/16") 562H3810C 562H3810B 533 (21") 457 (18") 3 (1/8") 562H4570C 562H4570B 610 (24") 533 (21") 3 (1/8") 562H5330C 562H5330B NOTE: These runners are for 16 (5/8") maximum drawer side thickness 707N HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and side-to-side self-alignment Zinc-coated steel NOTE: See page 53 for 9" TANDEM rear attachment options Non-handed bracket TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

21 Extension Full Max. drawer material 16 (5/8") Dynamic load capacity 75 lb Static load capacity 100 lb Drawer and cabinet specifications Front view Drawer back preparation inside Inside cabinet cabinet opening width width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook drawer width 1 1 (7/ 1 6") System or #7 wood screws page (1-7/16") 21 (13/16") 13 (1/2") bottom recess drawer side thickness maximum 16 (5/8") drawer height maximum = opening minus 20 (13/16") 14 (9/16") bottom clearance opening height Rear mounting bracket (5/8") (1-1/4") 13 (1/2") 33 (1-5/16") minimum rear notch 21 (13/16") Face frame stile Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width 2 (3/32") 14 (9/16") Face frame rail 12 (15/32") NOTE: For frame applications, minimum three screws per bracket Runner mounting specifications Rear mounting bracket TH 9 (11/32") B A 37 (1-7/16") 10 (3/8") Runner close-up 32 (1-1/4") 33 (1-5/16") 6 (1/4") 9 (11/32") NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities runner length inside cabinet depth 4 (5/32") setback *NOTE: For panel applications the fi rst screw location is always 37 (1-7/16"). 25 (31/32") 37 (1-7/16") TANDEM plus Inside cabinet depth Screw locations TANDEM plus Drawer with rear attachment Runner length for panel cabinets BLUMOTION length Maximum Minimum A B 562H2290B (9") 299 (11-3/4") 266 (10-1/2") 258 (10-3/16") 133 (5-1/4") 229 (9") 562H3050C 562H3050B 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4") 562H3810C 562H3810B 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16") 562H4570C 562H4570B 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16") 562H5330C 562H5330B 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8") Dimensions in millimeters (inch equivalents as noted) 21

22 TANDEM plus BLUMOTION 562. full extension drawer runners Description Full extension concealed drawer runners with integrated BLUMOTION For 16 (5/8") max. drawer side thickness Frame applications must be blocked-out Rear tilt adjustment Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 75 lb Static load capacity of 100 lb Basic components Locking device Runner Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM plus BLUMOTION BLUMOTION inside 533 (21") 457 (18") 3 (1/8") B 610 (24") 533 (21") 3 (1/8") B NOTE: These runners are for 16 (5/8") max. drawer side thickness 707N HG Runner comparison (8-13/16") 37 (1-7/16") 562H NOTE: Same hole pattern/location as the 562H Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") All other TANDEM locking devices can also be used Rear mounting bracket for frame cabinets NOTE: Rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the frame. Right locking device Left locking device T R T L 612TH Subject to technical modifi cations without notice

23 Extension Full Max. drawer material 16 (5/8") Dynamic load capacity 75 lb Static load capacity 100 lb Drawer and cabinet specifications Front view Drawer back preparation inside cabinet opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook drawer width 1 1 (7/ 1 6") System or #7 wood screws page (13/16") drawer side thickness maximum 16 (5/8") drawer height maximum = opening minus 20 (13/16") opening height 13 (1/2") 33 (1-5/16") minimum rear notch 37 (1-7/16") 13 (1/2") bottom recess 14 (9/16") bottom clearance Calculating outside drawer width For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width Runner mounting specifications Runner close-up Blocking for frame applications A 32 (1-1/4") 37 (1-7/16") 10 (3/8") 32 (1-1/4") 33 (1-5/16") 6 (1/4") 9 (11/32") 4 (5/32") Setback runner length inside cabinet depth 25 (31/32") 37 (1-7/16") NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities (minimum four screws) TANDEM plus Drawer Minimum inside Screw location Runner length BLUMOTION length cabinet depth A B 457 (18") 477 (18-3/4") 470 (18-1/2") 261 (10-1/4") B 533 (21") 553 (21-3/4") 546 (21-1/2") 261 (10-1/4") Dimensions in millimeters (inch equivalents as noted) 23

24 TANDEM plus 562F full extension drawer runners Overlay application Description Basic components Full extension concealed drawer runners Available with integrated BLUMOTION For 19 (3/4") max. drawer side thickness Rear tilt adjustment Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 75 lb Static load capacity of 100 lb Locking device Runner Other applications Inset drawer pg. 30 Narrow drawer pg. 32 Roll-out shelf pg. 34 Bottom mount pg. 35 ORGA-LINE pg. 40 Deep drawer pg. 48 Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM plus TANDEM plus BLUMOTION BLUMOTION inside 305 (12") 229 (9") 16 (5/8") 562F2290B (15") 305 (12") 24 (15/16") 562F3050C 562F3050B 457 (18") 381 (15") 14 (9/16") 562F3810C 562F3810B 533 (21") 457 (18") 3 (1/8") 562F4570C 562F4570B 610 (24") 533 (21") 3 (1/8") 562F5330C 562F5330B NOTE: These runners are for 19 (3/4") maximum drawer side thickness 707N HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and side-to-side self-alignment Zinc-coated steel NOTE: See page 53 for 9" TANDEM rear attachment options Non-handed bracket TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

25 Extension Full Max. drawer material 19 (3/4") Dynamic load capacity 75 lb Static load capacity 100 lb Drawer and cabinet specifications Front view Drawer back preparation inside cabinet opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook drawer width 1 1 (7/ 1 6") System or #7 wood screws page (15/16") drawer side thickness maximum 19 (3/4") drawer height maximum = opening minus 20 (13/16") opening height 33 (1-5/16") minimum rear notch Rear mounting bracket 13 (1/2") 37 (1-7/16") 13 (1/2") bottom recess 14 (9/16") bottom clearance (5/8") (1-1/4") 21 (13/16") Face frame stile Calculating outside drawer width For drawer side thickness 19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32") Deduct from inside cabinet width 11 (7/16") 13 (1/2") 14 (9/16") 17 (21/32") 19 (3/4") Example: For 21" inside cabinet width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width 2 (3/32") 14 (9/16") Face frame rail 12 (15/32") NOTE: For frame applications, minimum three screws per bracket Runner mounting specifications Rear mounting bracket TH 9 (11/32") B A 37 (1-7/16") 10 (3/8") Runner close-up 32 (1-1/4") 33 (1-5/16") 6 (1/4") 9 (11/32") *NOTE: For panel applications the fi rst screw location is always 37 (1-7/16") TANDEM plus NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities inside cabinet depth 4 (5/32") setback runner length 25 (31/32") 37 (1-7/16") Inside cabinet depth Screw locations TANDEM plus Drawer with rear attachment Runner length for panel cabinets BLUMOTION length Maximum Minimum A B 562F2290B (9") 299 (11-3/4") 266 (10-1/2") 258 (10-3/16") 133 (5-1/2") 229 (9") 562F3050C 562F3050B 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4") 562F3810C 562F3810B 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16") 562F4570C 562F4570B 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16") 562F5330C 562F5330B 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8") Dimensions in millimeters (inch equivalents as noted) 25

26 TANDEM plus 568H/568. heavy duty drawer runners Overlay application Description Basic components Full extension concealed drawer runners with integrated BLUMOTION For 16 (5/8") max. drawer side thickness Frame applications must be blocked-out Rear tilt adjustment Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 110 lb Static load capacity of 125 lb Locking device Runner Other applications Inset drawer pg. 30 Bottom mount pg. 35 SPACE CORNER pg. 36 ORGA-LINE pg. 40 Deep drawer pg. 48 Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM plus BLUMOTION BLUMOTION inside 533 (21") 457 (18") 20 (13/16") 568H4570B (24") 533 (21") 19 (3/4") 568H5330B (27") 610 (24") 19 (3/4") B (30") 686 (27") 20 (13/16") B (33") 762 (30") 28 (1-1/8") B01 NOTE: These runners are for 16 (5/8") max. drawer side thickness 707N HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") Rear mounting bracket for frame cabinets NOTE: For heavy duty applications, rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the frame. See page 27. NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

27 Extension Full Max. drawer material 16 (5/8") Dynamic load capacity 110 lb Static load capacity 125 lb Drawer and cabinet specifications Front view Drawer back preparation inside cabinet opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook drawer width 1 1 (7/ 1 6") System or #7 wood screws page (13/16") drawer side thickness maximum 16 (5/8") drawer height maximum = opening minus 20 (13/16") opening height 13 (1/2") 33 (1-5/16") minimum rear notch 37 (1-7/16") 568H 13 (1/2") bottom recess 14 (9/16") bottom clearance Calculating outside drawer width 568. For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width Runner mounting specifications B Runner close-up Blocking for frame applications A 37 (1-7/16") 10 (3/8") 32 (1-1/4") 33 (1-5/16") 6 (1/4") 9 (11/32") NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities (min. 5 screws) runner length inside cabinet depth 4 (5/32") setback 25 (31/32") 37 (1-7/16") *NOTE: For panel applications the fi rst screw location is always 10 (25/64") TANDEM plus BLUMOTION Drawer length Minimum inside cabinet depth Runner length Screw locations for panel cabinets A B 568H4570B (18") 477 (18-3/4") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16") 568H5330B (21") 553 (21-3/4") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8") B (24") 633 (24-15/16") 626 (24-11/16") 261 (10-1/4") 389 (15-5/16") B (27") 703 (27-11/16") 696 (27-7/16") 261 (10-1/4") 389 (15-5/16") B (30") 778 (30-5/8") 771 (30-3/8") 261 (10-1/4") 389 (15-5/16") Dimensions in millimeters (inch equivalents as noted) 27

28 TANDEM plus 568F/568A heavy duty drawer runners Overlay application Description Basic components Full extension concealed drawer runners with integrated BLUMOTION For 19 (3/4") max. drawer side thickness Frame applications must be blocked-out Rear tilt adjustment Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action Locking devices enable easy drawer insertion and removal Force-guided right side and ±1.5 (1/16") tolerance-compensating left side Dynamic load capacity of 110 lb Static load capacity of 125 lb Locking device Runner Other applications Inset drawer pg. 30 Bottom mount pg. 35 SPACE CORNER pg. 36 ORGA-LINE pg. 40 Deep drawer pg. 48 Components Runner set One set required per drawer For overall cabinet depth Drawer length Extension loss TANDEM plus BLUMOTION BLUMOTION inside 533 (21") 457 (18") 20 (13/16") 568F4570B (24") 533 (21") 19 (3/4") 568F5330B (27") 610 (24") 19 (3/4") 568A6100B (30") 686 (27") 20 (13/16") 568A6860B (33") 762 (30") 28 (1-1/8") 568A7620B01 NOTE: These runners are for 19 (3/4") max. drawer side thickness 707N HG Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") Rear mounting bracket for frame cabinets NOTE: For heavy duty applications, rear brackets and sockets cannot be used. Cabinet sides must be blocked-out flush with the inside of the frame. See page 29. NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

29 Extension Full Max. drawer material 19 (3/4") Dynamic load capacity 110 lb Static load capacity 125 lb Drawer and cabinet specifications Front view Drawer back preparation inside cabinet opening width 6 (1/4") minimum top clearance 7 (9/32") Ø6 x 1 0 bo r e f or hook drawer width System or #7 wood screws page (15/16") drawer side thickness maximum 19 (3/4") drawer height maximum = opening minus 20 (13/16") opening height 1 1 (7/ 1 6") 13 (1/2") 33 (1-5/16") minimum rear notch 37 (1-7/16") 13 (1/2") bottom recess 14 (9/16") bottom clearance 568F Calculating outside drawer width For drawer side thickness 19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32") Deduct from inside cabinet width 11 (7/16") 13 (1/2") 14 (9/16") 17 (21/32") 19 (3/4") Example: For 21" inside cabinet width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width 568A Runner mounting specifications B Runner close-up Blocking for frame applications A 37 (1-7/16") 10 (3/8") 32 (1-1/4") 33 (1-5/16") 6 (1/4") 9 (11/32") NOTE: Orange dots indicate screw locations required to meet specifi ed load capacities (min. 5 screws) runner length 4 (5/32") setback 25 (31/32") inside cabinet depth 37 (1-7/16") *NOTE: For panel applications the fi rst screw location is always 10 (25/64") TANDEM plus Drawer Minimum inside Screw locations for panel cabinets Runner length BLUMOTION length cabinet depth A B 568F4570B (18") 477 (18-3/4") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16") 568F5330B (21") 553 (21-3/4") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8") 568A6100B (24") 633 (24-15/16") 626 (24-11/16") 261 (10-1/4") 389 (15-5/16") 568A6860B (27") 703 (27-11/16") 696 (27-7/16") 261 (10-1/4") 389 (15-5/16") 568A7620B (30") 778 (30-5/8") 771 (30-3/8") 261 (10-1/4") 389 (15-5/16") Dimensions in millimeters (inch equivalents as noted) 29

30 Inset drawers Application Description Basic components Requires increased setback of cabinet runner Frame applications require blocking-out behind face frame Rear mounting bracket for face frame only Locking device Runner Inset bracket set Set includes: Inset bracket (qty 2) #8-32 x 1/2" machine screw (qty 2) #7 x 2" truss head, type 17 screw (qty 4) #6 x 3/4" truss head, type 17 screw (qty 4) Inset spacer Two required per drawer Inset spacer requires drawer box to be built 1" shorter May be required for inset SERVO-DRIVE applications 1" Inset bracket set Inset spacer T59.A5P0 606N or 606P Depth adjustable locking device (inset) The depth adjustable locking device is specially designed for inset applications to allow installers to perfectly align drawer fronts. Offers 4 (5/32") out adjustment, preset at 0 For use with 562/568 Designed for 13 (1/2") bottom recess Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and side-to-side self-alignment Zinc-coated steel NOTE: See page 50 for other options Right T PV R Left T PV L 612TH NOTE: See page 52 for other options Non-handed bracket TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

31 Applications 552/562, H/F series runners Runner setback See table on the bottom of page Trial recommended Blocking behind frame 562./568 series runners Runner setback See table on the bottom of page Trial recommended Blocking behind frame inside cabinet depth range Minimum = runner length + setback + 6 (1/4") Maximum with bracket = runner length + setback + 48 (1-15/16") inside cabinet depth range Minimum = runner length + setback + 6 (1/4") Depth adjustment Turning the adjustment screw, using a Phillips or POZI driver, allows for up to 4 (5/32") out adjustment. Bottom recess Drawer sub front thickness Designed for a 13 (1/2") bottom recess 13 (1/2") drawer sub front thickness Installation Mounting the TANDEM runner for inset application Runner Mounting hole position Drawer front 562H Runner setback 562F Runner setback 13 (1/2") 18 (11/16") 21 (13/16") 24 (15/16") 13 (1/2") 15 (9/16") 18 (11/16") 21 (13/16") 16 (5/8") 21 (13/16") 24 (15/16") 27 (1-1/16") 16 (5/8") 18 (11/16") 21 (13/16") 24 (15/16") 19 (3/4") 24 (15/16") 27 (1-1/16") 30 (1-3/16") 19 (3/4") 21 (13/16") 24 (15/16") 27 (1-1/16") 16 (5/8") 19 (3/4") 22 (7/8") 16 (5/8") 19 (3/4") 22 (7/8") NOTE: Runner cannot be mounted below opening Sub front thickness Drawer front thickness Sub front thickness Drawer front thickness Setbacks shown are for drawer fronts that are fl ush with the face frame For recessed drawer fronts or to allow for adjustability, the setback must be increased After installation, adjust the locking device until the drawer front is in the desired position (out adjustment only) Calculating runner setback 562H (Sub front thickness + drawer front thickness minus 11 (7/16") = runner setback) 562F (Sub front thickness + drawer front thickness minus 14 (9/16") = runner setback) NOTE: For mounting hole position, add 6 (1/4") to runner setback Dimensions in millimeters (inch equivalents as noted) 31

32 Narrow drawers Application Description Basic components For inside drawer widths of 95 (3-3/4") to 121 (4-3/4") Special narrow locking device required Maximum load rating for narrow drawer locking device is 25 lb Minimum 16 (5/8") drawer material Partial or full extension Rear mounting bracket for face frame only Locking device Runner Components Runner set BLUMOTION inside Narrow drawer application is possible with any TANDEM, TANDEM plus or TANDEM plus BLUMOTION runner. See the installation instructions for the runner used. Partial extension 552H series page F series page 18 Full extension 562H series page series page F series page 24 Narrow drawer locking device One right and one left required per drawer Maximum load rating of 25 lb For inside drawer widths of 95 (3-3/4") to 121 (4-3/4") Requires 16 (5/8") min. sub front thickness Height adjustable +3 (1/8") For use with 552/562 Designed for 13 (1/2") drawer bottom recess Rear mounting bracket for frame cabinets For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation. Two required per drawer Depth and side-to-side self-alignment Zinc-coated steel Right Left T R T L 606N or 606P NOTE: See page 52 for other options Non-handed bracket TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

33 Drawer and cabinet specifications Attach locking devices 1 Position locking device in front corner of the drawer 2 Pre-bore locking device mounting screw holes with Ø2.5 mm piloting bit 3 Attach with two 606N or 606P screws 4 Repeat on the other side 16 (5/8") min. 95 (3-3/4") to 121 (4-3/4") NOTE: A minimum of 16 (5/8") drawer material is required for mounting the narrow drawer locking device Drawer back preparation 7 (9/32") Ø6 x 1 0 bo r e f or hook 1 1 (7/ 1 6") 13 (1/2") 33 (1-5/16") minimum rear notch Dimensions in millimeters (inch equivalents as noted) 33

34 Roll-out shelf Application Description Possible with any TANDEM runner Dynamic load capacity of 75 lb Basic components Locking device Runner Components Shelf size and position in opening inside cabinet width Rear mounting block Attach rear mounting block to the back of the shelf instead of notching and boring. 20 (3/4") outside shelf width 16 (5/8") 13 (1/2 ) 8 (5/16") 10 (3/8") X Inside shelf width = inside cabinet width - 42 (1-5/8 ) for H inside cabinet width - 49 (1-15/16 ) for F Calculating outside tray width Apron 19 (3/4") 18 (23/32") 17 (21/32") 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32") thickness (X) Deduct from inside 11 (7/16") 13 (15/32") 14 (9/16") 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32") cabinet width Eliminates the need to edge bore holes for hooks on roll-outs NOTE: Shelf length = specifi ed runner length minus 10 (3/8") Rear mounting block T N Positive stop locking device For use when a precise stopping position is required. One right and one left required per drawer For interior roll-out applications Height adjustable +3 (1/8") For use with all TANDEM runners Shelf assembly Positive stop locking device for roll-out shelf applications Set side apron 1/8" from back shelf panel T PO Right locking device T PO R Installation Left locking device T PO L page TH Align inside of mounting block tip with inside edge of the apron Subject to technical modifi cations without notice

35 Bottom mount drawer Application Description Basic components Possible with any TANDEM runner Dynamic load capacity of up to 110 lb with TANDEM heavy duty runners Drawer bottom mount installation Roll-out tray bottom mount installation 19.5 (3/4") 30 (1-3/16") Universal mounting bracket page (3/4") 30 (1-3/16") Universal mounting bracket page TH Screws 612TH Screws Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") Dual mount application NOTE: See page 50 for other options 42 (1-5/8") 19.5(3/4") 30 (1-3/16") Right locking device T R Installation Left locking device T L page TH Dimensions in millimeters (inch equivalents as noted) 35

36 SPACE CORNER Application Description Basic components Use longer length heavy duty TANDEM plus BLUMOTION runners Requires special cabinet and drawer construction (see note below) For 16 (5/8") max. drawer side material use TANDEM plus 568. series For 19 (3/4") max. drawer side material use TANDEM plus 568A series Dynamic load capacity of 110 lb Static load capacity of 125 lb Components One set required per drawer BLUMOTION inside Corner cabinet size Maximum 5/8" drawer side thickness Maximum 3/4" drawer side thickness 36", 39" or 42" B01 568A6860B01 NOTE: SPACE CORNER requires special cabinet and drawer construction. See suggestions on cabinet construction at Standard locking device One right and one left required per drawer Minimum inside drawer width 121 (4-3/4") Height adjustable +3 (1/8") Measuring corner cabinet size corner cabinet size NOTE: See page 50 for other options Right locking device T R Installation Left locking device T L page TH Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

37 110 lb. Drawer construction For a 39" SPACE CORNER using 5/8" material and B01 For a 39" SPACE CORNER using 3/4" material and 568A6860B01 Mounting locations D C B A 9 (11/32") runner length setback TANDEM plus BLUMOTION Drawer material Setback A B C D B01 16 (5/8") 108 (4-1/4") 114 (4-1/2") 141 (5-9/16") 365 (14-3/8") 493 (19-3/8") 568A6860B01 19 (3/4") 117 (4-5/8") 123 (4-7/8") 150 (5-15/16") 374 (14-3/4") 502 (19-3/4") NOTE: Detailed drawings for cabinet construction are available at Dimensions in millimeters (inch equivalents as noted) 37

38 TIP-ON for TANDEM plus Overlay application Description Designed for drawers without pulls Opens the drawer with just a touch of the drawer front Tool-free attachment of mechanism and trigger Only works with TANDEM plus 562 H/F series runners without BLUMOTION Basic components Runner TIP-ON mechanism Components TIP-ON for TANDEM plus set One set required per drawer Set includes: 1 TIP-ON mechanisms (qty 2) 2 Adjustable triggers (qty 2) 3 Rear hook spacers (qty 2) TIP-ON for TANDEM plus set T S Assembly and adjustment Step one Attachment of mechanism Step two Attachment of trigger click Step three Attachment of rear hook spacer Step four Front gap adjustment Trigger allows -1 (1/32") in and +2 (1/16") out adjustment of the drawer front NOTE: Minimum front gap = 2.5 (3/32") Subject to technical modifi cations without notice

39 Installation Specifications TANDEM 562H dimensions TANDEM 562F dimensions Drawer back preparation 6 (1/4") min. 6 (1/4") min. 7 (9/32") Ø6 x 1 0 bo r e f or hook 38 (1-1/2") 38 (1-1/2") 11 (7/16") 13 (1/2") 1 (1/32") min. 21 (13/16") 106 (4-3/16") 1 (1/32") min (15/16") (4-5/16") 85 (3-3/8") minimum rear notch NOTE: Minimum cabinet opening width for TIP-ON is 229 (9") TIP-ON for TANDEM plus synchronization set (optional) 1 2 Assembly Step one Calculating linkage rod length Recommended for cabinet widths from 610 (24") 1220 (48") wide (panel and face frame) Synchronizes left and right TIP-ON mechanisms to improve function on wide drawers Set includes: 1 Linkage rod, length 908 (35-3/4") 2 Pinion gears (qty 2) Instruction sheet TIP-ON for TANDEM plus synchronization set Step two Attach pinion gears T55.908WR LRL LRL = Inside cabinet width minus 277 Step three Attach to left mechanism Step four Attach to right mechanism With runners extended, start with the fl at side of the linkage rod up; insert pinion on left into the left hand TIP-ON mechanism as shown Compress spring of the pinion on right and insert it into right hand TIP-ON mechanism as shown. Dimensions in millimeters (inch equivalents as noted) 39

40 ORGA-LINE a Spice tray Description Quick and easy removal of Spice tray from cabinet High quality stainless steel combined with wear resistant nylon parts in gray Form fi tting locating tabs with anti-slip surface Contents visible due to angled surface Dishwasher safe to 170 F Set includes: Trays (qty 3) Locating tabs (qty 6) Basic components Spice tray set ZFZ.38G0I Spice tray specifications Dimensions Installation 120 (4-3/4") 190 (7-1/2") 504 (19-7/8") 282 (11-1/8") NOTE: 21" drawer length using 13 (1/2") drawer box material required 606N or 606P Aluminum foil dispenser Description Basic components Convenient dispenser for aluminum foil Can be installed with or without an ORGA-LINE set Simple and precise cutting Easy removal from drawer Dispenser can be used on the counter top or while still in the drawer For rolls up to 46 (1-3/4") in diameter and 330 (13") in length 69.3 (2-3/4") 411 (16-3/16") 88.5 (3-1/2") Aluminum foil dispenser ZSZ.02F1 606N or 606P Subject to technical modifi cations without notice

41 a ORGA-LINE Plastic wrap dispenser Basic components Convenient dispenser for plastic wrap Fits into existing ORGA-LINE sets Simple and precise cutting Easy removal from drawer Wrinkle-free nylon wrap due to wrap stick Dispenser can be used on counter top or while still in the drawer For rolls up to 46 (1-3/4") in diameter and 330 (13") in length 69.3 (2-3/4") Description ( / 16" ) ") 1/ (3- Plastic wrap dispenser ZSZ.01F1 606N or 606P Knife holder Basic components Description Attaches to ORGA-LINE utensil set or drawer bottom High quality stainless steel combined with wear resistant nylon parts in gray Holds up to nine knives of varying sizes Plastic and stainless steel construction Four handle supports for large knives Dishwasher safe to 170 F Set includes: Knife holder Handle supports (qty 4) Locating tab Knife holder set ZSZ.02M0 606N or 606P Knife holder specifications Handle supports Maximum nine knives Four included Dimensions 0 ) 18 16" / -1 (7 Dimensions in millimeters (inch equivalents as noted) 41 2 (1 80 1" ) 60 ( 2-3 /8 " ) Capacity

42 ORGA-LINE Application Description Use ORGA-LINE adjustable organization system High quality stainless steel utensil dividers combined with wear resistant nylon parts in gray Removable cutlery trays, dishwasher safe to 170 o F Spring-loaded compensation tray and side rails Designed for drawer side thickness of 13 (1/2") to 19 (3/4") For 533 (21") or 457 (18") drawer lengths NOTE: For assembly instructions see page 58 Specifications Tray dimensions Set heights 88 (3-1/2") 88 (3-1/2") 176 (7") 88 (3-1/2") 264 (10-3/8") 88 (3-1/2") Example of 21" drawer with ZHI.533BI3A Example of 18" drawer with ZHI.457GI3A Compensation tray Side rail Cutlery tray End connector 19-1/4" to 20" Tray partition 16-1/4" to 17" Inside drawer length must be within this range for the spring-loaded side rails to fi t properly. Inside drawer length must be within this range for the spring-loaded side rails to fi t properly. Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

43 Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 297 (11-5/8") 156 (6-1/8") 108 (4-1/4") 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 449 (17-5/8") 122 (4-13/16") 294 (11-9/16") 18" Drawer length ZHI.457FI3A 21" Drawer length ZHI.533FI3A 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 302 (11-7/8") 449 (17-5/8") 114 (4-1/2") 18" Drawer length ZHI.457GI3A NOTE: Compensation tray not included with ZHI.457GI3A 21" Drawer length ZHI.533MI3A Dimensions in millimeters (inch equivalents as noted) 43

44 Cutlery sets 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 297 (11-5/8") 156 (6-1/8") 108 (4-1/4") 21" Drawer length ZHI.533BI1A 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 449 (17-5/8") 132 (5-3/16 ) 284 (11-3/16") 21" Drawer length ZHI.533BI3A 24" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 524 (20-5/8") 111 (4-3/8") 381 (15") 21" Drawer length ZHI.533KI4A Subject to technical modifi cations without notice

45 Special applications a Exact fit for 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides Adjusts from 15-3/4" to 16-1/2" wide to completely fill a drawer in a 21" wide cabinet. Adjustable section 449 (17-5/8") 416 (16-3/8") 400 (15-3/4") to 419 (16-1/2") 21" Drawer length ZHI.533TI4A Exact fit for 24" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides Adjusts from 18-3/4" to 19-1/2" wide to completely fill a drawer in a 24" wide cabinet. A dju s t able se c tio n 524 (20-5/8") 492 (19-3/8") 18-3/4" to 19-1/2" 21" Drawer length ZHI.533TI5A Applications for wide drawers For wide drawers use combinations of ORGA-LINE sets to maximize storage space and organization. Examples: 21" Drawer length ZHI.533MI3A + ZHI.533KI4A 21" Drawer length ZHI.533FI3A + ZHI.533MI3A Dimensions in millimeters (inch equivalents as noted) 45

46 ORGA-LINE cutlery trays a Application Description High quality stainless steel utensil dividers combined with wear resistant nylon parts in gray Removable, dishwasher safe to 170 o F Use NOTE: For assembly instructions see page 58 Components Short tray Medium tray Long tray 88 (3-1/2") 88 (3-1/2") 176 (7") 88 (3-1/2") 264 (10-3/8") Short tray ZSI.010SI Medium tray ZSI.020SI Long tray 88 (3-1/2") ZSI.030SI Specifications Set height Tray height Subject to technical modifi cations without notice

47 ORGA-LINE dividers a Application Description Trays and dividers available separately Wear resistant nylon parts in gray Spring-loaded ends Use NOTE: For assembly instructions see page 58 Components Single cross divider Double cross divider 88 (3-1/2") 176 (7") Single cross divider ZSI.010Q Double cross divider ZSI.020Q Example Single cross divider Double cross divider Dimensions in millimeters (inch equivalents as noted) 47

48 ORGA-LINE for deep drawers Application Description Deep drawer organization for TANDEM 21" wood drawers Cut to size cross dividers to fi t drawers with an inside width of up to 1139 (44-5/8") Spring-loaded interior side rails Clip-on lateral dividers For drawer thicknesses of 16 (5/8") or 19 (3/4") Minimum inside drawer height 135 (5-1/4") Available in gray Use NOTE: For assembly instructions see page 58 Minimum inside drawer height 135 (5-1/4") Cross divider Spring connector (4-1/2") 1077 (42-1/4") 1077 (42-1/4"), cut to size aluminum core Width = inside drawer width minus 62 (2-7/16") Maximum inside drawer width = 1139 (44-5/8") NOTE: Metal cutting blade recommended for cutting cross dividers Cross divider Z40H1077A Spring connector Z40H000A Interior side rail Lateral divider (4") 131 (5-3/16") For 21" drawer (4-1/2") Interior side rail ZHI.533SS65 Lateral divider Z43H100S.01 Using TANDEM page 14 Drawer preparation page 15 Accessories page 54 Assembly aids page 56 Subject to technical modifi cations without notice

49 a Food A Cross dividers (qty 2) B Spring connectors (qty 4) C Interior side rails (qty 2) D Lateral dividers (qty 6) C B A D Containers A Cross dividers (qty 2) B Spring connectors (qty 4) C Interior side rails (qty 2) D Lateral dividers (qty 6) C B A D Pots/Pans A Cross dividers (qty 2) B Spring connectors (qty 4) C A C Interior side rails (qty 2) D Lateral dividers (qty 6) B D Plates Set includes two plate holders For storing plates in deep drawers Overall height 171 (6-3/4") Adjusts to hold plates from 180 (7-1/16") to 320 (12-5/8") Non-slip bottom High quality plastic and stainless steel Available in gray Plate holders ZTH.0350 Dimensions in millimeters (inch equivalents as noted) 49

50 Locking devices Standard For use with standard applications Captive right device and ±1/16" self-adjusting tolerance on left device Self-adjusting drawer length tolerance Zinc die-cast with synthetic, spring-loaded release levers Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device T R T L 612TH Vertical mount Vertical mount locking device used to minimize sub front splitting Captive right device and ±1/16" self-adjusting tolerance on left device Zinc die-cast with synthetic, spring-loaded release levers Minimum sub front thickness 16 (5/8") Tool-free drawer height adjustment +3 (1/8") Designed for 1/2" bottom recess Right locking device Left locking device T R T L 606N or 606P Depth adjustable (inset) For use with inset drawers Adjustable stop with 4 (5/32") depth range for consistantly accurate stops and perfectly aligned drawer fronts Captive right device and ±1/16" self-adjusting tolerance on left device Self-adjusting drawer length tolerance Zinc die-cast with synthetic, spring-loaded release levers Tool-free drawer height adjustment +3 (1/8") Designed for 1/2" bottom recess For use with 562/568 only Right locking device Left locking device T PV R T PV L 612TH Subject to technical modifi cations without notice

51 Positive stop For use when a precise stopping position is required (example: roll-out tray application) Captive right device and ±1/16" self-adjusting tolerance on left device Zinc die-cast with synthetic, spring-loaded release levers Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device T PO R T PO L 612TH Narrow drawer For use with narrow drawers minimum inside drawer width 95 (3-3/4"), minimum sub front thickness 16 (5/8"), maximum load capacity 25 lb Captive right device and ±1/16" self-adjusting tolerance on left device Self-adjusting drawer length tolerance Vertical mount, two-piece nylon Tool-free drawer height adjustment +3 (1/8") Designed for 1/2" bottom recess Right locking device Left locking device T R T L 606N or 606P SERVO-DRIVE locking device with integrated bumper For use with inset and/or overlay applications Integrated 3 (1/8") distance bumper Captive right device and ±1/16" self-adjusting tolerance on left device Adjustable stop with +4 (5/32") depth range for consistently accurate stops and perfectly aligned drawer fronts Tool-free drawer height adjustment +3 (1/8") Minimum sub front thickness 13 (1/2") For use with 562/568 only Right locking device Left locking device T PS R T PS L 612TH Dimensions in millimeters (inch equivalents as noted) 51

52 Rear attachment options Screw-on bracket For TANDEM 552 and 562 H/F series only Lateral self-alignment feature 3 (1/8") Non-handed, one-piece stamped steel design, zinc-coated Use at least three #6 truss head screws Not for use with 9" TANDEM plus BLUMOTION runners (562H/F2290B10) (5/8") (1-1/4") 2 (3/32") 21 (13/16") 14.4 (9/16") Face Frame Stile Face Frame Rail Screw-on bracket NOTE: Drawing to the right is for 562 series 612TH Screw-on bracket with locating tabs For TANDEM 562 H/F series only Lateral self-alignment feature 3 (1/8") One-piece stamped steel design, zinc-coated Use at least two #6 truss head screws Not for use with 9" TANDEM plus BLUMOTION runners (562H/F2290B10) 32 (1-1/4") 3.2 (1/8") Ø8 32 (1-1/4") Face Frame Stile Face Frame Rail Right bracket Left bracket L R 612TH Plug-in socket For TANDEM 552 and 562 H/F series only Lateral self-alignment feature Non-handed, two-piece design Non-detachable 8 (5/16") dowels, 9.5 (3/8") long Synthetic, natural color 6 (1/4") minimum back panel thickness Use for inset applications Not for use with 9" TANDEM plus BLUMOTION runners (562H/F2290B10) 32 (1-1/4") 3.2 (1/8") Ø8 16 (5/8") Face Frame Stile Face Frame Rail Plug-in socket N Subject to technical modifi cations without notice

53 Screw-on socket For TANDEM 552 and 562 H/F series only Lateral self-alignment feature Non-handed, two-piece design Synthetic, natural color Use two #7 fl at head wood screws Not for use with 9" TANDEM plus BLUMOTION runners (562H/F229B10) 40 (1-9/16") 2 (1/16") 19 (3/4") 9 (3/8") 37 (1-7/16") 6.5 (1/4") Face Frame Stile Face Frame Rail Screw-on socket N Screw-on socket for TANDEM plus BLUMOTION 9" For use when installing TANDEM plus BLUMOTION 9" runners in face frame cabinets For inside c a binet depth 266 (10-15/32") 282 (11-3/32") Two required per drawer Use at least three #6 truss head screws Side-to-side self-alignment (1-1/4") (11/16") 4 (3/16") 39.5 (1-9/16") 16 (5/8") Face Frame Stile Face Frame Rail Screw-on socket TH Screw-on socket for TANDEM plus BLUMOTION 9" For use when installing 9" TANDEM plus BLUMOTION runners in face frame cabinets For inside c a binet depth 283 (11-5/32") 299 (11-25/32") Two required per drawer Use at least three #6 truss head screws Side-to-side self-alignment (1-1/4") (11/16") 4 (3/16") 39.5 (1-9/16") 16 (5/8") Face Frame Stile Face Frame Rail Screw-on socket TH Dimensions in millimeters (inch equivalents as noted) 53

54 68 (2-11/16") 62 (2-7/16") 30 (1-3/16") Accessories Deep thread system screw Pilot bore Ø5 (3/16") hole Deep thread wood screw Truss head wood screw Pilot bore Ø2 (3/32") hole Ø5 #7 x 13 mm, #2 POZI HG #7 x 14.5 mm, #2 POZI HG #6 x 5/8", #2 Phillips 606N #6 x 5/8", #2 POZI 606P #6 x 3/4, #2 Phillips 6064N #7 x 5/8", #2 Phillips 707N #7 x 3/4", #2 Phillips 7074N #6 x 1/2", #2 Phillips 612TH Bumpers POZI DRIVER and bits A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identifi ed by the distinctive tick marks located in the center of the screw head recess. POZI Phillips Cushions door closing Clear with a self-adhesive back Ø7.5 (9/32") x 2 (3/32") FX4041 Ø12 (15/32") x 3.5(1/8") SJ5312 Tick marks #2 POZI DRIVER POZI DRIVER 1/4" Magnetic bit holder BIT HOLDER #2 x 1" POZI bit insert POZI BIT #2x1 #2 x 2" POZI bit insert POZI BIT #2x2 Universal bracket set Zinc-coated steel brackets Set includes: Brackets (qty 4) M4 screws (qty 8) Universal bracket dimensions 64 (2-9/16") 48 (1-7/8") 16 (5/8") M4 tapped holes M4X6MM 19.5 (3/4") 30 (1-3/16") 34 (1-5/16") 1.5 (1/16") 50(1-15/16") 18(11/16") 68 (2-11/16") 7 (1/4") 5 (3/16") 16 (5/8") 32 (1-1/4") Universal bracket set #6 x 1/2", truss head 612TH 48 (1-7/8") Subject to technical modifi cations without notice

55 a TANDEM end cap Side spacer For spacing out TANDEM runners from the cabinet side for clearance on interior roll-outs. Drawer front adjuster Nylon housing with pre-mounted 8-32 steel nut. For four-sided drawers. Adjusts height and side-to-side by 5 (3/16"). To cover the front edge of TANDEM cabinet runners when used in an interior roll-out application Can be used with TANDEM 552/562 H/F/. runners Right end cap Left end cap Side spacer - 1" thick T POZI installation screw HG NOTE: See next page for marking guage Drawer front adjuster TANDEM plus runner cover Attachment Removal Nylon cover to help protect the runner against dust and debris Available in 533 (21") only and can be cut to size Designed for 562/568 H/F TANDEM plus cover Lay the cover on top of the runner Slide it to the back 1 2 Slide the cover forward slightly Lift the cover off from the rear Dimensions in millimeters (inch equivalents as noted) 55

56 Assembly aids Drawer front adjuster marking gauge For marking center holes for press-in drawer front adjusters For wooden four-sided drawers Using the marking gauge 1 Pre-bore for front adjusters Insert marking gauges into drawer front 2 Align the drawer front to make marks in the drawer box 3 Mark fi xing positions with a light tap onto 4 the drawer front Bore Ø5 (3/16") holes through the drawer box Marking gauge TANDEM template Essential tool for drawers using TANDEM runners To bore the Ø6 mm holes for rear hooks Pre-bore Ø2.5 mm hole for TANDEM locking devices at 15 angle Using the TANDEM template 1 Bore rear fi xing holes 2 Pre-bore holes for locking device screws Ø6 mm bit Ø2.5 mm bit with extension Tool set includes: TANDEM template T Accessories (order separately) A B C D A Ø2.5 mm drill bit extension B Ø6 mm stop collar C #2 Phillips screwdriver tip D Allen wrench Ø2.5 mm drill bit DB-2.5mm Ø6 mm drill bit DB-6mm Tool set T NOTE: Items NOT sold separately Subject to technical modifi cations without notice

57 Universal individual template For pre-boring TANDEM drawer runners Also used for marking/pre-boring other Blum drawer systems, AVENTOS locating pins, hinge mounting plates, BLUMOTION adapters, and TIP-ON adapters Calibrated scale for accurate setting Set includes: Universal individual template Ø2.5 mm and Ø5 mm stop collars Allen wrench Universal individual template Cabinet profile template set Used for pre-boring holes for TANDEM drawer runners Also used for marking/pre-boring other Blum drawer systems, AVENTOS locating pins and hinge mounting plates, Cabinet profi le template Replacement template Ø2.5 mm drill bit DB-2.5mm Ø5 mm drill bit DB-5mm Components Set includes: 1 Rail, 1 meter long 2 Replacement template (qty 4) 3 Ø2.5 mm stop collar 4 Ø5 mm stop collar 5 Allen wrench 2 5 NOTE: ONLY the replacement template is sold separately Dimensions in millimeters (inch equivalents as noted) 57

58 Assembly, removal and adjustment Height adjustment Tilt adjustment Press up on adjustment tab Push toward back of drawer Tool-free drawer height adjustment +3 (1/8") Rotate the tilt adjustment lever on the rear of each runner to tilt the top of the drawer front forward. Tool-free tilt adjustment +5 mm. Drawer preparation 612TH Drawer box insertion Drawer box removal Place drawer on runners and close; locking devices will automatically engage runners Squeeze orange handles on locking devices 2. 2 Pull drawer out and up ORGA-LINE tray set assembly ORGA-LINE deep drawer assembly Subject to technical modifi cations without notice

59 Part number index i Page no , 30, 32, , F4570N F5330N H3810N H4570N H5330N B B F2290B F3050B F3050C F3810B F3810C F4570B F4570C F5330B F5330C H2290B H3050B H3050C H3810B H3810C H4570B H4570C H5330B H5330C B B , B A6100B A6860B A7620B F4570B F5330B H4570B H5330B N P N TH HG HG N N 54 BIT HOLDER 54 DB-2.5mm DB-5mm 57 DB-6mm 56 FX M4X6MM 54 POZI BIT #2x1 54 POZI BIT #2x2 54 POZI DRIVER 54 SJ T ,51 T , 35-36,50 T T PO 34,51 T PS 51 T PV 30,50 T T S 38 T55.908WR 39 T59.A5P0 30 T T T Z40H000A 48 Z40H1077A 48 Z43H100S ZFZ.380G0I 40 ZHI.457FI1A 43 ZHI.457FI3A 43, 45 ZHI.457GI3A 43 ZHI.533BI1A 44 ZHI.533BI3A 44 ZHI.533FI3A 43, 45 ZHI.533FI1A 43 ZHI.533KI4A 44, 45 ZHI.533MI3A 43, 45 ZHI.533SS65 48 ZHI.533TI4A 45 ZHI.533TI5A 45 ZTH ZSI.010Q 47 ZSI.010SI 46 ZSI.020Q 47 ZSI.020SI 46 ZSI.030SI 46 ZSZ ZSZ ZSZ.02M0 41 Dimensions in millimeters (inch equivalents as noted) 59

60 Notes 60

61 Notes 61

62 62 Blum, Inc. Headquarters, Stanley NC

63 Why choose Blum Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum supports the U.S. market with a network of more than 150 dependable distributors, 40+ knowledgeable Blum sales representatives and an experienced customer service department. Commitment to manufacturing in the U.S. Blum manufactures many of its products in our 450,000 sq ft manufacturing, logistics and warehouse facility located in Stanley, North Carolina. Manufacturing closer to the customer allows Blum to react quickly to changing customer needs including unexpected surges in demand. Customer pickups and deliveries can be timed to better match their production schedules. Blum is committed to manufacturing in the U.S. for the U.S. market. Product development at Blum considers all of the various customers who will come in contact with our products. With this Global Customer Benefi ts philosophy we strive to create advantages for all users. Blum, Inc. is ISO 9001 certifi ed which means that you are assured of consistent quality in every Blum product. What s more they exceed the requirements of ANSI/ BHMA standards for cycle life, static load and self-closing performance. 63