SPARE PARTS MANUAL MAGNA 1200 MULTIMOTOR AND AUTOMATIC MAGNA 2000 MULTIMOTOR AND AUTOMATIC

Transcription

1 MANUAL MAGNA 0 MULTIMOTOR AND AUTOMATIC MAGNA 00 MULTIMOTOR AND AUTOMATIC Update June 3

2 TABLE LIST ISSUED: 06.3 The Agirmec code nr and OPICO code nr are used to identify components used in the Magna Dryer build. Where OPICO code nr are listed please use these part nr when ordering parts, if there is not an OPICO part nr listed then ref to the Agrimec code. The OPICO part nr system gives an indication of the model type which the part nr will fit, there are 3 sections that make up the 8 digit part number. Take care to ensure you identify the correct part and dryer model when ordering parts Agrimec company code, digits Item code, 4 digits Dryer model code, digits; 00 - Universal part for Magna 0, 00, 90 - Magna 0 only - Magna 00 only 9 - Magna 00 only Examples; Fan belt SPB3000 fits Magna 00 dryer only 6063 Cleaner screen,.5mm (barley, wheat, oats) fits all dryers

3 TABLE LIST ISSUED: 06.3 Table Description Page 0/00 Frame 4 5 0/00 Cylinder with extension /00 Inner central tube with winch and eject cleaner /00 Inner central tube for electric discharge 0 05/00 Metal sheets for bottom cone 06/00 Metal sheets for plenum cone 3 07/00 Electrical loading auger /00 Electrical agitator /00 Hopper and single loading auger tube 8 9 0/0 Heat unit 0/0 Heat unit 3 /00 Fan transmission 4 5 /0 Agitator and Transmission 6 7 /0 Agitator and Transmission 8 9 3/0 Central auger and transmission /0 Central auger and transmission /00 Electrical discharge auger unilateral /00 Electrical discharge auger bilateral /0 Riello Burner Press G /0 Riello Burner Press G /0 Riello Burner Press 3G /0 Riello Burner Press 3G /00 Diesel Tank /00 Electric cabinet, outer panel Electric drive /0-0 Electric cabinet, inner panel Electric drive /0-0 Electric cabinet, inner panel Automatic drive /03 Electric cabinet, outer panel Automatic drive

4 TABLE 0/00 ISSUED: 06.3 FRAME MAGNA MAGNA

5 LIST FOR TABLE 0/00 ISSUED: 06.3 FRAME Pos. Agrimec Opico Model Qty Description Drawbar jack (anterior) Frame jack Loading auger support Support for tube (Fixed auger) Axle plaques Wheel complete Axle Swivel hitch drawbar Level bubble Transport light kit (SX +DX ) pulley d top link pins with chain and pin lower support for winch system Magna red paint 5

6 TABLE 0/00 ISSUED: 06.3 CYLINDER WITH EXTENSION

7 LIST FOR TABLE 0/00 ISSUED: 06.3 CYLINDER WITH EXTENSION Pos. Agrimec Opico Model Qty Description Inner strengthener Inner strengthener Rope clamp Steel Rope d=5mm L= Pulley Safety pin Steel Rope d=5mm L=6400 Steel Rope d=5mm L=8000 Winding tube complete Reduction gear RI 50 F / Handle Extension guide blade L= top link pins with chain and pin Extension guide tube L= Guide Tube guide profile L= Whole panel Whole panel Perforated metal sheet for panel H=50 L=980 + L= 7 Perforated metal sheet for panel H=000 L=480 + L= Perforated metal sheet for panel H=750 L= Perforated metal sheet for extension H=000 L=3930 Perforated metal sheet for extension H=000 L=4930 Ladder protection Ladder hoops Ladder, hoop connecting bars L=980 Ladder, hoop connecting bars L=470 Ladder, outer top, fixed Safety Ladder protection plate Ladder, inner top Ladder, outer lower Ladder, outer top, mobile Empty dryer sensor Empty dryer sensor 7

8 TABLE 03/00 ISSUED: 06.3 INNER CENTRAL TUBE

9 LIST FOR TABLE 03/00 ISSUED : 06.3 INNER CENTRAL TUBE Pos. Agrimec Opico Model Qty Description *.. * Central tube COMPLETE L=4360 Central tube COMPLETE L=490 Central tube lower section d.368 L=3460 Central tube lower section d.368 L=3660 Central tube upper section L=900 Central tube upper section L=50 Eject cleaner Cleaner screen, blank H= Cleaner screen,.5mm (osr) H= Cleaner screen, mm H= Cleaner screen,.5mm (barley, wheat, oats) H= Cleaner screen, 3mm H= Cleaner screen, 4mm (optional) H= Cleaner screen, 5mm (optional; peas, beans) H= Cleaner flange Cleaner tube Grain sampler 7 * Handgrip Pulley Rope for tipping, L=4000mm d=4mm Rope for tipping, L=4600mm d=4mm Rope for winch, L=8000mm d=5mm Rope for winch, L=9000mm d=5mm Support for tipping Support for tipping Pulley support Sensor bearer air temp. sensor PT00 with silicone cable sensor tube L = sensor tube L = Cable gland G ½ 4 * Winch Perforated metal sheet H=65 L=490 Perforated metal sheet H=65 L=6886 Perforated metal sheet H=50 L=490 Perforated metal sheet H=000 L= Hose Clamp for flexible tube d.70 mm Flexible tube d.70 L=.3mt for cleaner tube * : this code is invalid in the case of swivel discharge and / or dust extractor: in these cases the winch system of table 04 is installed. 9

10 INNER CENTRAL TUBE FOR ELECTRIC DISCHARGE SPARE PARTS TABLE 04/00 ISSUED:

11 LIST FOR TABLE 04/00 ISSUED : 06.3 Pos. INNER CENTRAL TUBE FOR ELECTRIC DISCHARGE Agrimec Opico Model Qty Description Central tube lower section d.368 L=3460 Central tube lower section d.368 L= Pin for hinge locking Screw for hinge locking Central tube upper section L=900 Central tube upper section L=50 Central tube upper section L=0 Central tube upper section L=500 Central tube upper section L=500 Central tube upper section L= tilt lever assembly pin for tipping Split pin d.4 L= Hinge for upper rod of winch system Top and lower link pins with handle Rope for winch, L=8000mm d=5mm Rope for winch, L=9000mm d=5mm Top link pins with chain and pin Pulley Upper rod of winch system Lower rod of winch system Connecting plaque for winch system rod Winch Goliath AF typ AF Lower support for winch system Top and lower pins with handle, pin and chain Auto sensor dryer full Fan assembly complete - three phase motor Fan inlet - Ø50mm Fan inlet with air suction valve control - Ø50 mm Fan inlet with cleaner pipe connection - Ø50 mm Cyclone assembly and mounting stand - Ø50 mm Ø50 mm flexi hose L=5mt Hose Clamp for flexible tube d.50 mm

12 TABLE AND LIST 05/00 ISSUED : 06.3 METAL SHEETS FOR BOTTOM CONE LAYOUT FOR MAGNA 0 AND MAGNA 00 LAYOUT FOR MAGNA 90 Pos Agrimec Opico Model Qty Description Blank sheet Perforated sheet Blank sheet Blank sheet Perforated sheet Door protection Door

13 TABLE AND LIST 06/00 ISSUED : 06.3 METAL SHEETS FOR PLENUM CONE Pos Agrimec Opico Model Qty Description Perforated sheet Perforated sheet 3

14 TABLE 07/00 ISSUED: 06.3 ELECTRICAL LOADING AUGER

15 LIST FOR TABLE 07/00 ISSUED: 06.3 ELECTRICAL LOADING AUGER Pos Agrimec Opico Model Qty Description Bearing support UCFL Mobile loading spiral d Mobile loading spiral d Fix loading spiral d Fix loading spiral d Bearing support UCFL Protection cover for cardanic head Cardanic shaft B4x500 A60-A Cardanic shaft B5x600 A60-A Bearing support UCP Splined shaft Pulley cover on the shaft side Taper bush 30 (d.40) Pulley SPA 355/ Pulley SPA 400/ Motor Pulley SPA 90/ Motor Pulley SPA-90/ Taper bush for motor pulley 60 (d.8) Taper bush for motor pulley 65 (d.38) Belt SPA Belt SPA Electrical motor 4 kw 4P B Electrical motor 5.5 KW 4P B3 5

16 TABLE 08/00 ISSUED: 06.3 ELECTRICAL AGITATOR

17 LIST FOR TABLE 08/00 ISSUED: 06.3 ELECTRICAL AGITATOR Pos Agrimec Opico Model Qty Description Gear box RI 85 F /49 d Gearbox support Electric motor support kw Taper bush 57 (d.4) Pulley SPA 35/ Pulley SPA 355/ Belt A 5 Belt A Pulley SPA 75/ Taper bush 08 (d.4) Electrical motor.5 kw 4P B Agitator shaft 7

18 TABLE 09/00 ISSUED: 06.3 HOPPER AND SINGLE LOADING AUGER TUBE 8

19 LIST FOR TABLE 09/00 ISSUED: 06.3 HOPPER AND SINGLE LOADING AUGER TUBE Pos Agrimec Opico Model Qty Description Loading Hopper COMPLETE, L=39mm Loading Hopper COMPLETE, L=34mm Support Grain divider Loading adjuster Protection grid Hinge support Ring Pulley support for loading hopper Pulley Pulley support, pivoting Rope connection Clamp, steel rope Rope, L=3500 d= 5mm Rope, L=3000 d= 5mm Winch Case Door case Tube - COMPLETE Ring Support Tube D Tube D Little jack support Little jack protection cover for cardanic head 9

20 TABLE 0/0 ISSUED: 06.3 HEAT UNIT

21 LIST FOR TABLE 0/0 ISSUED: 06.3 HEAT UNIT Pos Agrimec Opico Model Qty Description Box gripping burner side Furnace lid Furnace Refractory bricks Furnace bottom, stainless steel Furnace mouth Case body Case door Hinge

22 TABLE 0/0 ISSUED: 06.3 HEAT UNIT

23 LIST FOR TABLE 0/0 ISSUED: 06.3 HEAT UNIT Pos Agrimec Opico Model Qty Description Frontal sheet of heat unit case body Burner flange G Burner flange 3G Burner Press G bio - RIELLO Burner Press G bio - RIELLO Cover for oil burner G Cover for oil burner G Outside air duct Internal air duct 3

24 TABLE /00 ISSUED: 06.3 FAN TRANSMISSION 4

25 LIST FOR TABLE /00 ISSUED: 06.3 FAN TRANSMISSION Pos Agrimec Opico Model Qty Description Cover of fan support RL 70 -COMPLETE Cover of fan support RL 800 -COMPLETE UKP 9 support + H 309 d UKP support + H 3 d Fan shaft fireguard RL Fan shaft fireguard RL Flange blocking fan RL Flange blocking fan RL Fan rotor and flange RL Fan rotor and flange RL Electric motor 8.5 KW 4P B Electric motor KW 4P B Fan body Fan body Fan shaft RL Fan shaft RL UKP support + H 3 d.50 high temperature Belt B Belt B Motor Pulley SPB 60/ Motor Pulley SPB 60/ Taper bush 57 (d.48) Taper bush 30 (d.48) Pulley SPB 40/ Pulley SPB 60/ Taper bush 57 (d.50) Taper bush 30 (d.50) feather key (4x9x75) feather key (4x9x75) 5

26 TABLE /0 ISSUED: 06.3 AGITATOR AND TRANSMISSION

27 LIST FOR TABLE /0 ISSUED: 06.3 AGITATOR AND TRANSMISSION Pos Agrimec Opico Model Qty Description Ring to guide race ring Outer central tube - COMPLETE Race ring Roller complete Nut M Roller Spacer, external Seeger circlip D Oil seal Bearing Spacer, internal Bolt Mx Lubrication point M8x Rotation agitator arm sensor -COMPLETE Chain tightener support - COMPLETE Threaded bar M6 L= Spring cover Spring Mobile square tube Little shaft Pinion Z Bearing 6304 RS Spacer custom-made Seeger circlip D Nut M Tubular support Agitator shaft 7

28 TABLE /0 ISSUED: 06.3 AGITATOR AND TRANSMISSION

29 LIST FOR TABLE /0 ISSUED: 06.3 AGITATOR AND TRANSMISSION Pos Agrimec Opico Model Qty Description Pinion Z simple Support UCP Pulley SPA 35/ Pulley SPA 355/ 0.* Taper bush 57 (d.4) Belt A 5 Belt A Pulley SPA 75/.* Taper bush 08 (d.4) Electrical motor.5 kw 4P B Worm gearbox RI 85 F / empty dryer sensor empty dryer sensor box Agitator arm 9

30 TABLE 3/0 ISSUED: 06.3 CENTRAL AUGER AND TRANSMISSION

31 LIST FOR TABLE 3/0 ISSUED: 06.3 CENTRAL AUGER AND TRANSMISSION Pos Agrimec Opico Model Qty Description Top bearing assy - COMPLETE Bearing support Washer Oil seal Needle bearing 68 RS Seeger d Washer 6.5x48x Screw T.E. M6x Cover central auger M0 L=46 COMPLETE central auger M0 L=49 COMPLETE central auger M0 L=5 COMPLETE central auger M00 L=570 COMPLETE central auger M00 L=54 COMPLETE central auger M00 L=59 COMPLETE Central auger, lower section MAGNA 0 Central auger, lower section MAGNA 00 Central auger, upper section M0 L=850 Central auger, upper section M0 L=50 Central auger, upper section M00 L=0 Central auger, upper section OP0/00 L=450 Central auger, upper section M00 L= Undercone support of central auger Screw T.E. M6x Cover of undercone support Seeger d Oil seal Bearing NJ Bearing NJ grease M0x with extension Undercone support body Undercone support flange Bearing Oil seal

32 TABLE 3/0 ISSUED: 06.3 CENTRAL AUGER AND TRANSMISSION

33 LIST FOR TABLE 3/0 ISSUED: 06.3 CENTRAL AUGER AND TRANSMISSION Pos Agrimec Opico Model Qty Description Seeger d Small flap A 4x9x Little shaft of central auger drag Electric motor support Motor tie rod Electric motor 5 KW 4P B3 Electric motor 5 KW 6P B3 Taper bush of motor pulley 60 (d.4) Taper bush of motor pulley 57 (d.48) Motor pulley SPA 00/5 Motor pulley SPB 40/ Belt protection Pulley SPA 560/5 Pulley SPB 560/ Sensor Magnet Speed sensor Taper bush 3535 (d.45) Taper bush 4040 (d.45) Box undercone MAGNA 0 Box undercone MAGNA 00 Belt SPA 800 Belt SPB Protection disk-shaped Upper covering Support plate for safety guard Bearing support UCFL 8 33

34 TABLE 4/00 ISSUED: 06.3 ELECTRICAL DISCHARGE AUGER UNILATERAL

35 LIST FOR TABLE 4/00 ISSUED: 06.3 ELECTRICAL DISCHARGE AUGER UNILATERAL Pos Cod Cod Opico Model Qty Description Bearing support UCFL Head cap Discharge auger Spiral d.30 L= Discharge auger Spiral d.80 L=675 4# outer tube d.50 mm L= outer tube d.300 mm L= Swivel connector of discharge auger d.50 mm 5 95 angle Swivel connector of discharge auger d.300 mm angle Electric motor support Electric motor. KW 4P B Discharge chute for outer tube d.50 mm Discharge chute for outer tube d.300 mm Bearing support UCFL Pulley SPA 35/ Pulley SPA 450/ Taper bush 30 (d.40) Belt SPA Belt SPA Belt protection guard Taper bush of motor pulley (d.8) Motor pulley SPA 80/ Motor pulley SPA 90/ Window maintenance Motor cover # NOTE: Standard auger dimensions shown, custom lengths may be fitted, check machine specification. *NOTE: Standard discharge auger angled upward, allowing the vertical to fold inside dryer, options including dust extractor and extended 35

36 TABLE 5/00 ISSUED: 06.3 ELECTRICAL DISCHARGE AUGER BILATERAL 36

37 LIST FOR TABLE 5/00 ISSUED: 06.3 ELECTRICAL DISCHARGE AUGER BILATERAL Pos Cod Cod Opico Model Qty Description Secondary discharge chute for outer tube d.50 mm Spiral support of the discharge auger d.50mm Spiral support of the discharge auger d.300mm Needle bearing 66 RS Seeger d Oil seal Discharge auger Spiral d.30 L= Discharge auger Spiral d.80 L=3884 4# Outer tube d.50 mm L= Outer tube d.300 mm L= anchorage for rope chute support Swivel connector of discharge auger d.50 mm Swivel connector of discharge auger d.300 mm Plate motor support Electric motor. KW 4P B Discharge chute for outer tube d.50 mm Discharge chute for outer tube d.300 mm Bearing support UCFL Pulley SPA 35/ Pulley SPA 450/ Taper bush 30 (d.40) Belt SPA Belt SPA Belt protection guard Taper bush of motor pulley (d.8) Motor pulley SPA 80/ Motor pulley SPA 90/ Window maintenance Motor cover # NOTE: Standard auger dimensions shown, custom lengths may be fitted, check machine specification. 37

38 TABLE 6/ 0 ISSUED: 06.3 Riello Press G BIO MAGNA 0 38

39 TABLE 6/ 0 ISSUED: 06.3 Riello Press G BIO MAGNA 0 N. Code DESCRIZIONE DESCRIPTION Advised parts Valvola Needle valve Guarnizione Seal B Raccordo Connector C Raccordo Connector C Guarnizione Seal B Spillo Pin Girante Fan C Bocca d aspirazione Air intake Tubo Tube Raccordo Connector C Raccordo Connector C Tubo Tube Guarnizione Seal B Raccordo Connector C Guarnizione Seal A Filtro Filter A Vetrino Viewing port Fotoresistenza P.e. cell A Raccordo Connector C Guarnizione Seal A Fermo Spring lock Protezione Grid Pompa Pump C Giunto Joint A Motore Motor C Coperchio Cover Trasformatore Transformer B Coperchio Cover Mensola Base plate Raccordo Connector C Gruppo serranda Air 39ozze39 assembly Collegamento H.t. lead A Isolatore Insulator A Cavallotto U bolt 39

40 TABLE 6/ 0 ISSUED: 06.3 Riello Press G BIO MAGNA 0 40

41 TABLE 6/ 0 ISSUED: 06.3 Riello Press G BIO MAGNA 0 N. Code DESCRIZIONE DESCRIPTION Advised parts Elettrodo Electrode A Elettrodo di massa Earth electrode A Tubo Tube Tubo Tube Collare Collar Perno Bar Boccaglio Blast tube Imbuto fiamma End cone B Schermo Flange gasket A Elica Diffuser disc A Portaspruzzo Nozze holder C Albero Shaft Bobina Coil B Gruppo Valvole assembly B Martinetto Hydraulic jack C Anello DE DE ring B * Prolunga elettrodo Electrode extension Tubo flessibile Flexibile oil line A Raccordo Connector C * Prolunga Extension * Supporto elettrodi Electr0ode bracket * Cilindro Sleeve C * Dente Connection A: Spare parts for minimum fittings A+B: Spare parts for basic safety fittings A+B+C: Spare parts for extended safety fittings *: Long Combustion Head Version 4

42 TABLE 7/ 0 ISSUED: 06.3 Riello Press 3G BIO MAGNA 00 4

43 TABLE 7/ 0 ISSUED: 06.3 Riello Press 3G BIO MAGNA 00 N. Code DESCRIZIONE DESCRIPTION Advised parts Valvola Needle valve Guarnizione Seal B Raccordo Connector C Raccordo Connector C Guarnizione Seal B Spillo Pin Bocca d aspirazione Air intake Protezione Grid 0498 Fotoresistenza P.e. cell A Tubo Tube Tubo Tube Guarnizione Seal B Raccordo Connector C Organo di tenuta Pump seal Perno Screw Filtro Filter A Guarnizione Seal A Vetrino Viewing port Giunto Joint A Motore Motor C Mensola Base plate Pompa Pump C Coperchio Cover Trasformatore Transformer B Coperchio Cover Isolatore Insulator A Collegamento H.t. lead A Raccordo Connector C Fermo Spring lock Raccordo Connector C Martinetto Hydraulic jack C Girante Fan C Collare Collar Tubo Tube 43

44 TABLE 7/ 0 ISSUED: 06.3 Riello Press 3G BIO MAGNA 00 44

45 TABLE 7/ 0 ISSUED: 06.3 Riello Press 3G BIO MAGNA 00 N. Code DESCRIZIONE DESCRIPTION Advised part tubo tube elettrodi di massa earth electrode A elettrodo electrode cavallotto U bolt A boccaglio blast tube elica diffuser disk A schermo flange gasket A imbuto fiamma end cone B portaspruzzo nozzle holder C perno bar albero shaft * prolunga elettrodo electrode extension A * supporto elettrodi electrode bracket * prolunga extension bobina coil B gruppo serranda air damper assembly gruppo valvole valve assembly B anello DE DE ring B guarnizione seal B * dente connection tubo flessibile flexible oil line A raccordo connector C * cilindro sleeve C A: Spare parts for minimum fittings A+B: Spare parts for basic safety fittings A+B+C: Spare parts for extended safety fittings *: Long Combustion Head Version 45

46 TABLE 8/00 ISSUED: 06.3 DIESEL TANK 46

47 LIST FOR TABLE 8/00 ISSUED: 06.3 DIESEL TANK Pos Agrimec Opico Model Qty Description Fuel tank, complete Tank plug Discharge plug Valve Outward pipe ( section) Diesel filter complete - connection 3/8 Diesel filter complete - connection / Pleated stainless steel filtering element Outward pipe ( section) Return pipe Press G BIO Press 3G BIO Tank Strap Tank level indicator Pressure gauge for Riello Burner 47

48 - MAGNA 0-00 electric drive TABLE 9/00 ISSUED ON 06.3 ELECTRICAL BOX, OUTSIDE LAYOUT MULTIMOTOR DRYER 48

49 - MAGNA 0-00 electric drive TABLE 9/00 ISSUED ON 06.3 ELECTRICAL BOX, OUTSIDE LAYOUT MULTIMOTOR DRYER Pos Agrimec Opico Model Qty Description working machine light thermal safety emergency light fan start illuminated button fan stop button central auger start illuminated button central auger stop button loading auger start illuminated button loading auger stop button agitator start illuminated button agitator stop button burner start illuminated button burner stop button discharge auger start illuminated button discharge auger stop button power supply light thermo-regulator (air temp) Pixsys ATR Temperature sensor probe end of cycle thermostat (grain temp) Pixsys ATR Temperature sensor probe general isolator switch -- V0 A hour clock AEG (48x48) 4V AC stop emergency button (on the external door) - NO+NC Contact blocks NO- Single Contact blocks NC- Single Light blocks- WHITE -terminal connections 4V Light blocks- GREEN -terminal connections 4V Light blocks- RED -terminal connections 4V Light blocks- ORANGE -terminal connections 4V Light blocks- BLUE -terminal connections 4V Contact blocks NO - Double Contact blocks NC - Double 49

50 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT MULTIMOTOR DRYER 50

51 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT MULTIMOTOR DRYER Pos Agrimec Opico Model Qty Description General transformer 30/400V/4V 50VA safety thermostat on automatic cycle safety thermostat on manual cycle Auxiliary relay FINDER V Auxiliary relay FINDER V Auxiliary relay FINDER V Auxiliary relay FINDER V Timing relay TN80 - sc Socket for TN80 relays three-poles fuse 50A base unit, 4x A fuse (FU3) unipolar fuse 3A base unit, 0x Unipolar fuse 4A fuse (FU7) 0x Unipolar fuse 6A fuse (FU) 0x Unipolar fuse 0A fuse (FU8) 0x Overload relay RT3 SIEMENS SIRIUS 3RU 36-4 BBO Overload relay RT3 SIEMENS SIRIUS 3RU 36-4 DBO SQ motorprotector AEG MBS3SG3 4/3A SQ motorprotector AEG MBS3SG00 6,3/0 A SQ motorprotector AEG MBS3SG30 9/3 A SQ4 motorprotector AEG Mbs3SG063 4/6,3 A SQ6 motorprotector AEG MBS3SG040,5/4 A SQ6 motorprotector AEG MBS3SG05,6/,5 A switch isolator SD3 5A 4P Add-on N contact module for general switch KM Contactor AEG LS5K 4V AC Aux contactor HS 7K.0 (NO) KM3 Contactor AEG LSK KM3 Contactor AEG LS5K Aux contactor HS 7K.0 (NO) KM3A Contactor AEG LSK KM3A Contactor AEG LS5K Aux contactor HS 7K.0 (NO) Aux contactor HS 7K.0 (NC) 5

52 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT MULTIMOTOR DRYER 5

53 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT MULTIMOTOR DRYER Pos Agrimec Opico Model Qty Description KM3B Contactor AEG LSK Aux contactor HS 7K.0 (NC) KM Contactor AEG LS4K 4V AC KM Contactor AEG LS5K Aux contactor HS 7K.0 (NC) KM4 Contactor AEG LS 05 0E Aux contactor HS 05K.0 (NC) KM5 Contactor AEG LS 05 0E KM6 Contactor AEG LS 05 0E Aux contactor HS 05K. (NO) Terminals - pheonix 6mm Terminals - pheonix 0mm Terminals - pheonix 6mm Terminals - pheonix.5mm Pos Agrimec Opico Model Qty Description SMS kit for AUTOMATIC version SMS-kit for PTO/ELECTRIC model 53

54 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT AUTOMATIC DRYER 54

55 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT AUTOMATIC DRYER Pos Agrimec Opico Model Qty Description General transformer 30/400V/4V 50VA safety thermostat on automatic cycle safety thermostat on manual cycle Memory card Control box Master (with Touch Screen) 5.* Control box Master (without Touch Screen) Control box Slave ( with Touch Screen) 6.* Control box Slave (without Touch Screen) three-poles fuse 5A base unit, x fuse 5A - x58 unipolar fuse 3A base unit, 0x38 A fuse (FU0, FU3) 0x A fuse (FU7) 0x38 6A fuse (FU, FU) 0x38 0A fuse (FU8) 0x switching power supply AC/DC 4V DR relay FINDER V AC relay FINDER 405 4V AC relay FINDER 405 4V DC relay FINDER 405 4V DC relay FINDER 405 4V DC Overload relay RT3 SIEMENS SIRIUS 3RU 36-4 BBO Overload relay RT3 SIEMENS SIRIUS 3RU 36-4 DBO SQ motorprotector AEG MBS3SG3 4 3A SQ motorprotector AEG MBS63SG A SQ motorprotector AEG MBS3SG30 9 3A SQ4 motorprotector AEG MBS3SG ,3A SQ5 motorprotector AEG MBS3SG040,5-4A SQ6 motorprotector AEG MBS3SG040,5-4A SQ4 motorprotector AEG MBS3SG040,5-4A switch isolator SD3 5A 4P Add-on N contact module for general switch * These codes are used for electrical panels supplied without TOUCH SCREEN 55

56 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT AUTOMATIC DRYER 56

57 - MAGNA 0-00 electric drive TABLE /0 ISSUED ON 06.3 ELECTRICAL BOX, INSIDE LAYOUT AUTOMATIC DRYER Pos Agrimec Opico Model Qty Description KM Contactor AEG LS5K Aux contactor HS 7K.0 (NO) KM3 Contactor AEG LSK KM3 Contactor AEG LS5K KM3A Contactor AEG LSK KM3A Contactor AEG LS5K Aux contactor HS 7K.0 (NO) Aux contactor HS 7K.0 (NC) KM3B Contactor AEG LSK Aux contactor HS 7K.0 (NC) KM Contactor AEG LS4K KM Contactor AEG LS5K KM4A Contactor AEG LS05 0E KM4I Contactor AEG LS05 0E KM5 Contactor AEG LS05 0E KM6 Contactor AEG LS05 0E KM4 Contactor AEG LS05 0E Terminals - pheonix 6mm Terminals - pheonix 0mm Terminals - pheonix 6mm Terminals - pheonix.5mm Pos Agrimec Opico Model Qty Description SMS kit for AUTOMATIC version SMS-kit for PTO/ELECTRIC model 57

58 - MAGNA 0-00 electric drive TABLE /00 ISSUED ON 06.3 ELECTRICAL BOX, OUTSIDE LAYOUT AUTOMATIC DRYER 58

59 - MAGNA 0-00 electric drive TABLE /00 ISSUED ON 06.3 ELECTRICAL BOX, OUTSIDE LAYOUT AUTOMATIC DRYER Pos Agrimec Opico Model Qty Description power supply light working machine light end of cycle thermostat (grain temp) Pixsys ATR-AD Temperature sensor probe thermo-regulator (air temp) Pixsys ATR-AD Temperature sensor probe Touch screen KINKO MT444TE General switch isolator SD3 5A 4P Stop emergency button NO+NC Contact blocks NO- Single Contact blocks NC- Single Light blocks- WHITE -terminal connections 4V Light blocks- GREEN -terminal connections 4V Light blocks- RED -terminal connections 4V Light blocks- ORANGE -terminal connections 4V Light blocks- BLUE -terminal connections 4V Contact blocks NO - Double Contact blocks NC - Double 59