Alarm Guide for the Cisco Mobile Wireless Transport Manager 6.1.2

Transcription

1 Alarm Guide for the Cisco Mobile Wireless Transport Manager Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA Tel: NETS (6387) Fax: Text Part Number:

2 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB s public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, ilynx, IOS, iphone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1002R) Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Alarm Guide for the Cisco Mobile Wireless Transport Manager Cisco Systems, Inc. All rights reserved.

3 CONTENTS Preface v Organization v Conventions v Related Documentation vi Additional MWTM Documentation vi ITP Documentation vii IP-RAN Documentation vii msef Documentation vii Obtaining Documentation and Submitting a Service Request i-viii CHAPTER 1 Common Alarms 1-1 CHAPTER 2 BWG Alarms 2-1 CHAPTER 3 CSG1 Alarms 3-1 CHAPTER 4 CSG2 Alarms 4-1 CHAPTER 5 GGSN Alarms 5-1 CHAPTER 6 HA Alarms 6-1 CHAPTER 7 IP-RAN Alarms 7-1 CHAPTER 8 ITP Alarms 8-1 CHAPTER 9 PDSN Alarms 9-1 I NDEX OL Alarm Guide for the Cisco Mobile Wireless Transport Manager 6.1 iii

4 Contents iv Alarm Guide for the Cisco Mobile Wireless Transport Manager 6.1 OL

5 Preface Revised: March 3, 2010, This guide describes the alarms issued by the various components of MWTM Organization This guide contains the following chapters: Chapter 1, Common Alarms Chapter 2, BWG Alarms Chapter 3, CSG1 Alarms Chapter 4, CSG2 Alarms Chapter 5, GGSN Alarms Chapter 6, HA Alarms Chapter 7, IP-RAN Alarms Chapter 8, ITP Alarms Conventions This document uses the following conventions: Convention bold font italic font Indication Commands and keywords and user-entered text appear in bold font. Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. [ ] Elements in square brackets are optional. {x y z } Required alternative keywords are grouped in braces and separated by vertical bars. [ x y z ] Optional alternative keywords are grouped in brackets and separated by vertical bars. v

6 Preface string A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. courier font Terminal sessions and information the system displays appear in courier font. < > Nonprinting characters such as passwords are in angle brackets. [ ] Default responses to system prompts are in square brackets.!, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. Note Means reader take note. Tip Means the following information will help you solve a problem. Caution Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data. Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph. Warning Means reader be warned. In this situation, you might perform an action that could result in bodily injury. Related Documentation Related MWTM documentation includes: Additional MWTM Documentation ITP Documentation IP-RAN Documentation msef Documentation Additional MWTM Documentation Additional MWTM documentation can be found on Cisco.com: The MWTM includes a browser-based online help system that is searchable and supports bookmarking of favorite content. vi

7 Preface ITP Documentation Cisco IP Transfer Point (ITP) Information about Cisco IP Transfer Point (ITP) software, including procedures for configuring ITP nodes, can be found on Cisco.com: Information about the Cisco ITPs can be found in the documentation that shipped with the ITP. IP-RAN Documentation Cisco IP Radio Access Network (IP-RAN) For information about IP-RAN, visit these websites: Information about Cisco IPRAN nodes, including procedures for configuring IPRAN objects, can be found on Cisco.com: Cisco MWR 1900 Series: guides_list.html Cisco MWR 2900 Series: Cisco 3800 Series: guides_list.html Cisco ME 3400 Series: list.html Cisco ONS 15454: guides_list.html Cisco 7600 Series: guides_list.html msef Documentation Information about msef documentation can be found on Cisco.com: Cisco Gateway GPRS Support Node (GGSN) For information about GGSN, visit these websites: vii

8 Obtaining Documentation and Submitting a Service Request Preface Cisco Home Agent (HA) For information about HA, visit these websites: Cisco Content Services Gateway (CSG) For information about CSG, visit these websites: Cisco Broadband Wireless Gateway (BWG) For information about BWG, visit these websites: Server Load-Balancing/Exchange Director guides_list.html Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: Subscribe to the What s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0. viii

9 CHAPTER 1 Common Alarms Revised: 3/3/10, This chapter contains a list of the alarms that are common to most platforms that the Cisco Mobile Wireless Transport Manager supports. Table 1-1 Common Alarms Name Source Type Clear Severity Message Text TemperatureStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported temperature state normal on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state critical on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state not functioning on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported temperature state not present on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported temperature state shutdown on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported temperature state warning on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state $ciscoenvmontemperaturestate on $ciscoenvmontemperaturestatusdescr. TemperatureStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported temperature state normal on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state critical on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. 1-1

10 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state not functioning on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported temperature state not present on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported temperature state shutdown on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported temperature state warning on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state $ciscoenvmontemperaturestate on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported temperature state normal on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state critical on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state not functioning on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported temperature state not present on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported temperature state shutdown on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported temperature state warning on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. 1-2

11 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) TemperatureStateChange Trap Alarm Yes Major $NodeDisplayName - Reported temperature state $ciscoenvmontemperaturestate on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported temperature state 'normal' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported temperature state 'not present' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Warning $NodeDisplayName - Reported temperature state 'warning' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Major $NodeDisplayName - Reported temperature state 'critical' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Major $NodeDisplayName - Reported temperature state 'not functioning' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Critical $NodeDisplayName - Reported temperature state 'shutdown' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. TemperatureStateChange Poll Alarm Yes Major $NodeDisplayName - Reported temperature state '$ciscoenvmontemperaturestate' on $ciscoenvmontemperaturestatusdescr. $ciscoenvmontemperaturestatusvalue degrees. VoltageStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported Voltage state normal on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported Voltage state critical on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported Voltage state not functioning on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported Voltage state not present on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported Voltage state shutdown on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported Voltage state warning on $ciscoenvmonvoltagestatusdescr. 1-3

12 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported Voltage state $ciscoenvmonvoltagestate on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported voltage state normal on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported voltage state critical on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported voltage state not functioning on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported voltage state not present on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported voltage state shutdown on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported voltage state warning on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported voltage state $ciscoenvmonvoltagestate on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported voltage state normal on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported voltage state critical on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported voltage state not functioning on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported voltage state not present on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Minor $NodeDisplayName - Reported voltage state shutdown on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported voltage state warning on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. 1-4

13 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) VoltageStateChange Trap Alarm Yes Major $NodeDisplayName - Reported voltage state $ciscoenvmonvoltagestate on $ciscoenvmonvoltagestatusdescr. $ciscoenvmonvoltagestatusvalue millivolts. VoltageStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported Voltage state 'normal' on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported Voltage state 'not present' on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Poll Alarm Yes Warning $NodeDisplayName - Reported Voltage state 'warning' on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Voltage state 'critical' on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Voltage state 'not functioning' on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Poll Alarm Yes Critical $NodeDisplayName - Reported Voltage state 'shutdown' on $ciscoenvmonvoltagestatusdescr. VoltageStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Voltage state '$ciscoenvmonvoltagestate' on $ciscoenvmonvoltagestatusdescr. NsoActive Trap Alarm No Warning $NodeDisplayName - Redundant unit $UnitId now active. Switch reason: $RFSwitchReason. NsoState Trap Alarm No Major $NodeDisplayName - Redundancy states changed. Active Unit ID/State: $ActiveUnitId/$ActiveUnitState Peer Unit ID/State: $PeerUnitId/$PeerUnitState. AAAServerState Trap Event Yes Normal An AAA server is up on $NodeDisplayName. AAAServerState Trap Event Yes Major An AAA server is dead on $NodeDisplayName. EntityConfiguration Trap Alarm No Warning An entity configuration change occurred on $NodeDisplayName. RMONRising Trap Alarm No Warning An RMON rising alarm (Index: $alarmindex) occurred on $NodeDisplayName. ($alarmvariable=$alarmvalue which is above threshold $alarmrisingthreshold. RMONFalling Trap Alarm No Warning An RMON falling alarm (Index: $alarmindex) occurred on $NodeDisplayName. ($alarmvariable=$alarmvalue which is below threshold $alarmfallingthreshold. HSRPState Trap Alarm No Major The HSRP state on $NodeDisplayName changed to $chsrpgrpstandbystate. HSRPState Trap Alarm No Major The HSRP state on $NodeDisplayName changed to active. 1-5

14 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) HSRPState Trap Alarm No Major The HSRP state on $NodeDisplayName changed to standby. FlashDevice Trap Alarm Yes Warning Flash device removed or inserted on $NodeDisplayName. Device name: $ciscoflashdevicename. FlashDevice Trap Alarm Yes Normal Flash device inserted on $NodeDisplayName. Device name: $ciscoflashdevicename. FlashDevice Trap Alarm Yes Warning Flash device removed on $NodeDisplayName. Device name: $ciscoflashdevicename. FlashDevice Trap Alarm Yes Normal Flash device inserted on $NodeDisplayName. Device name: $ciscoflashdevicenameextended. FlashDevice Trap Alarm Yes Warning Flash device removed on $NodeDisplayName. Device name: $ciscoflashdevicenameextended. ModuleStatus Trap Alarm Yes Normal The module status of a field replaceable unit has changed to (ok) on $NodeDisplayName. Description: $entphysicaldescr ModuleStatus Trap Alarm Yes Major The module status of a field replaceable unit has changed to ($cefcmoduleoperstatus) on $NodeDisplayName. Description: $entphysicaldescr ModuleStatus Poll Alarm Yes Normal $NodeDisplayName - the module status of replaceable unit '$entphysicalname' has changed to 'ok'. Unit description: $entphysicaldescr ModuleStatus Poll Alarm Yes Major $NodeDisplayName - the module status of replaceable unit '$entphysicalname' has changed to '$cefcmoduleoperstatus'. Unit description: $entphysicaldescr PowerStatus Trap Alarm Yes Normal The power status of a field replaceable unit has changed to (on) on $NodeDisplayName. Description: $entphysicaldescr PowerStatus Trap Alarm Yes Major The power status of a field replaceable unit has changed to ($cefcfrupoweroperstatus) on $NodeDisplayName. Description: $entphysicaldescr PowerStatus Poll Alarm Yes Normal $NodeDisplayName - the power status of replaceable unit '$entphysicalname' has changed to 'on'. Unit description: $entphysicaldescr PowerStatus Poll Alarm Yes Major $NodeDisplayName - the power status of replaceable unit '$entphysicalname' has changed to '$cefcfrupoweroperstatus'. Unit description: $entphysicaldescr 1-6

15 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) IPSLAReaction Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - Reaction variable $rttmonreactvar = $rttmonreactvalue, Rising threshold = $rttmonreactthresholdrising, Falling threshold = $rttmonreactthresholdfalling IPSLAReaction Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - Reaction variable $rttmonreactvar = $rttmonreactvalue, Rising threshold = $rttmonreactthresholdrising, Falling threshold = $rttmonreactthresholdfalling IPSLAGroupStatus Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmplsvpnmonctrltag - LPD group status is up for target $rttmonlpdgrpstatstargetpe. IPSLAGroupStatus Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmplsvpnmonctrltag - LPD group status is $rttmonlpdgrpstatsgroupstatus for target $rttmonlpdgrpstatstargetpe. IPSLATimeout Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - RTT operation timeout cleared. IPSLATimeout Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - RTT operation timeout. IPSLAOverThreshold Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - RTT operation threshold violation cleared. IPSLAOverThreshold Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - RTT operation threshold violation. IPSLADataCorruption Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - RTT operation data corruption. IPSLADataCorruption Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - RTT operation data corruption cleared. IPSLADiscoveryFailed Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmplsvpnmonctrltag - LSP path discovery to $rttmonlpdgrpstatstargetpe succeeded. IPSLADiscoveryFailed Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmplsvpnmonctrltag - LSP path discovery to $rttmonlpdgrpstatstargetpe failed. IPSLAConnectionLost Trap Alarm Yes Normal $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - connection to a target has been restored. 1-7

16 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) IPSLAConnectionLost Trap Alarm Yes Warning $NodeDisplayName - IP SLA Probe $rttmonctrladmintag - connection to a target has been lost. RebootDetected Trap Alarm No Major $NodeDisplayName - Cold Start. Reason: $whyreload. RebootDetected Trap Alarm No Major $NodeDisplayName - Warm Start. Reason: $whyreload. RebootDetected Trap Alarm No Major $NodeDisplayName - Cold Start. Reason: $whyreload. RebootDetected Trap Alarm No Major $NodeDisplayName - Warm Start. Reason: $whyreload. RebootDetected Poll Alarm No Major Router reboot detected for $NodeDisplayName. Last known sysuptime is $SysUpTime. InterfaceState Trap Alarm Yes Warning $NodeDisplayName - Interface $ifdescr down. InterfaceState Trap Alarm Yes Normal $NodeDisplayName - Interface $ifdescr up. InterfaceState Trap Alarm Yes Warning $NodeDisplayName - Interface $ifdescr down. InterfaceState Trap Alarm Yes Normal $NodeDisplayName - Interface $ifdescr up. InterfaceState Poll Event Yes Normal Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Active/ActiveReason. InterfaceState Poll Alarm Yes Normal Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Up/UpReason. InterfaceState Poll Alarm Yes Critical Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Down/DownReason. InterfaceState Poll Event Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Warning/WarningReason. InterfaceState Poll Alarm Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Impaired/ImpairedReason. InterfaceState Poll Alarm Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Shutdown/ShutdownReason. 1-8

17 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) InterfaceState Poll Event Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to Unknown/UnknownReason. InterfaceState Poll Event Yes Informational Interface $NodeDisplayName/$RtrInterfaceDisplayName changed state from $RtrInterfaceLastState to $RtrInterfaceState/$RtrInterfaceStateReason. InterfaceState Poll Alarm Yes Normal Interface $NodeDisplayName/$RtrInterfaceDisplayName added in state Active/ActiveReason. InterfaceState Poll Alarm Yes Critical Interface $NodeDisplayName/$RtrInterfaceDisplayName added in state Down/DownReason. InterfaceState Poll Event Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName added in state Warning/WarningReason. InterfaceState Poll Alarm Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName added in state Shutdown/ShutdownReason. InterfaceState Poll Event Yes Warning Interface $NodeDisplayName/$RtrInterfaceDisplayName added in state Unknown/UnknownReason. InterfaceState Poll Event Yes Informational Interface $NodeDisplayName/$RtrInterfaceDisplayName added in state $RtrInterfaceState/$RtrInterfaceStateReason. ModuleStatusState Trap Alarm Yes Major $NodeDisplayName - Module type $moduletype at index $moduleindex is not ok. ModuleStatusState Trap Alarm Yes Normal $NodeDisplayName - Module type $moduletype at index $moduleindex is ok. ModuleStatusState Poll Alarm Yes Indeterminate $NodeDisplayName - The status of module $moduletypedescription at index $moduleindex is undetermined. ModuleStatusState Poll Alarm Yes Normal $NodeDisplayName - The status of module $moduletypedescription at index $moduleindex is normal. ModuleStatusState Poll Alarm Yes Minor $NodeDisplayName - module $moduletypedescription at index $moduleindex has a minor fault. ModuleStatusState Poll Alarm Yes Major $NodeDisplayName - module $moduletypedescription at index $moduleindex has a major fault. 1-9

18 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) LOS Trap Event Yes Critical $NodeDisplayName - (LOS) Unable to detect the DS1 signal. Index=lossofSignal[2] LOS Trap Event Yes Normal $NodeDisplayName - (LOS cleared) Able to detect the DS1 signal. Index=lossofSignalCleared[2] LOS Poll Alarm Yes Normal $NodeDisplayName $ifdescr (LOS cleared) Able to detect the DS1 signal. LOS Poll Alarm Yes Critical $NodeDisplayName $ifdescr (LOS) Unable to detect the DS1 signal. LOF Trap Event Yes Critical $NodeDisplayName - (LOF) Unable to synchronize on the DS1 signal. Index=lossofFrame[2] LOF Trap Event Yes Normal $NodeDisplayName - (LOF cleared) Able to synchronize on the DS1 signal. Index=lossofFrameCleared[2] LOF Poll Alarm Yes Normal $NodeDisplayName $ifdescr (LOF cleared) Able to synchronize on the DS1 signal. LOF Poll Alarm Yes Critical $NodeDisplayName $ifdescr (LOF) Unable to synchronize on the DS1 signal. RAI Trap Event Yes Major $NodeDisplayName - (RAI, yellow alarm) The transmitting equipment has lost its incoming signal. Index=detectedRemoteAlarmIndication[2] RAI Trap Event Yes Normal $NodeDisplayName - (RAI, yellow alarm cleared) The transmitting equipment has recovered its incoming signal. Index=detectedRemoteAlarmIndicationCleared[2] RAI Poll Alarm Yes Normal $NodeDisplayName $ifdescr (RAI, yellow alarm cleared) The transmitting equipment has recovered its incoming signal. RAI Poll Alarm Yes Major $NodeDisplayName $ifdescr (RAI, yellow alarm) The transmitting equipment has lost its incoming signal. AIS Trap Event Yes Major $NodeDisplayName - (AIS, blue alarm) Indicates that there is a transmission interruption located either at the equipment originating the AIS signal or upstream of that equipment. Index=detectedAlarmIndicationSignal[2] AIS Trap Event Yes Normal $NodeDisplayName - (AIS, blue alarm cleared) The transmission interruption has cleared. Index=detectedAlarmIndicationSignalCleared[2] AIS Poll Alarm Yes Normal $NodeDisplayName $ifdescr (AIS, blue alarm cleared) The transmission interruption has cleared. 1-10

19 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) AIS Poll Alarm Yes Major $NodeDisplayName $ifdescr (AIS, blue alarm) Indicates that there is a transmission interruption located either at the equipment originating the AIS signal or upstream of that equipment. ShutdownAlarm Trap Alarm No Critical $NodeDisplayName - Shutting down due to environmental problems. SupplyStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported power supply state normal on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Major $NodeDisplayName - Reported power supply state critical on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Major $NodeDisplayName - Reported power supply state not functioning on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported power supply state not present on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported power supply state shutdown on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported power supply state warning on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Major $NodeDisplayName - Reported power supply state $ciscoenvmonsupplystate on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported power supply state normal on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Major $NodeDisplayName - Reported power supply state critical on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Major $NodeDisplayName - Reported power supply state not functioning on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported power supply state not present on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported power supply state shutdown on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported power supply state warning on $ciscoenvmonsupplystatusdescr. SupplyStateChange Trap Alarm Yes Major $NodeDisplayName - Reported power supply state $ciscoenvmonsupplystate on $ciscoenvmonsupplystatusdescr. SupplyStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported Supply state 'normal' on $ciscoenvmonsupplystatusdescr. SupplyStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported Supply state 'not present' on $ciscoenvmonsupplystatusdescr. 1-11

20 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) SupplyStateChange Poll Alarm Yes Warning $NodeDisplayName - Reported Supply state 'warning' on $ciscoenvmonsupplystatusdescr. SupplyStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Supply state 'critical' on $ciscoenvmonsupplystatusdescr. SupplyStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Supply state 'not functioning' on $ciscoenvmonsupplystatusdescr. SupplyStateChange Poll Alarm Yes Critical $NodeDisplayName - Reported Supply state 'shutdown' on $ciscoenvmonsupplystatusdescr. SupplyStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Supply state '$ciscoenvmonsupplystate' on $ciscoenvmonsupplystatusdescr. FanStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported fan state normal on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Major $NodeDisplayName - Reported fan state critical on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Major $NodeDisplayName - Reported fan state not functioning on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported fan state not present on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported fan state shutdown on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported fan state warning on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Major $NodeDisplayName - Reported fan state $ciscoenvmonfanstate on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported fan state normal on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Major $NodeDisplayName - Reported fan state critical on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Major $NodeDisplayName - Reported fan state not functioning on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Normal $NodeDisplayName - Reported fan state not present on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Critical $NodeDisplayName - Reported fan state shutdown on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Warning $NodeDisplayName - Reported fan state warning on $ciscoenvmonfanstatusdescr. FanStateChange Trap Alarm Yes Major $NodeDisplayName - Reported fan state $ciscoenvmonfanstate on $ciscoenvmonfanstatusdescr. 1-12

21 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) FanStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported Fan state 'normal' on $ciscoenvmonfanstatusdescr. FanStateChange Poll Alarm Yes Normal $NodeDisplayName - Reported Fan state 'not present' on $ciscoenvmonfanstatusdescr. FanStateChange Poll Alarm Yes Warning $NodeDisplayName - Reported Fan state 'warning' on $ciscoenvmonfanstatusdescr. FanStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Fan state 'critical' on $ciscoenvmonfanstatusdescr. FanStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Fan state 'not functioning' on $ciscoenvmonfanstatusdescr. FanStateChange Poll Alarm Yes Critical $NodeDisplayName - Reported Fan state 'shutdown' on $ciscoenvmonfanstatusdescr. FanStateChange Poll Alarm Yes Major $NodeDisplayName - Reported Fan state '$ciscoenvmonfanstate' on $ciscoenvmonfanstatusdescr. NodeUnreachable Poll Alarm Yes Critical Node $NodeDisplayName is unreachable. NodeUnreachable Poll Alarm Yes Normal Node $NodeDisplayName is reachable. TrapRateStatus Poll Alarm Yes Critical Node $NodeDisplayName is generating too many traps. MWTM has stopped trap processing for this node. MWTM will re-enable trap processing in approximately $RescueTime minutes. TrapRateStatus Poll Alarm Yes Minor Node $NodeDisplayName trap rate exceeds threshold level of $MinorThreshold. TrapRateStatus Poll Alarm Yes Normal Node $NodeDisplayName $Message FailoverDetected Poll Alarm No Warning Router failover/hardware replacement detected for $NodeDisplayName. Last known sysuptime is $SysUpTime. SnmpError Poll Alarm No Warning Node $NodeDisplayName is not a supported device or does not have the minimum IOS mib level. SnmpError Poll Alarm No Minor Node $NodeDisplayName encountered an error during polling: $ErrorString. SnmpError Poll Alarm No Warning Node $NodeDisplayName has not been configured. PWE3CircuitState Poll Alarm Yes Normal $NodeDisplayName - Circuit $circuitname is up. Circuit ID: $circuitid. PWE3CircuitState Poll Alarm Yes Major $NodeDisplayName - Circuit $circuitname is down. Circuit ID: $circuitid. Description: $circuitdescription. Transmit state: $circuitoutboundstate. Receive state: $circuitinboundstate 1-13

22 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) PWE3CircuitState Poll Alarm Yes Major $NodeDisplayName - Circuit $circuitname is in an unknown state. Circuit ID: $circuitid. Description: $circuitdescription. Transmit state: $circuitoutboundstate. Receive state: $circuitinboundstate PWE3CircuitState Poll Alarm Yes Informational $NodeDisplayName - Circuit $circuitname is dormant. Circuit ID: $circuitid. Description: $circuitdescription. Transmit state: $circuitoutboundstate. Receive state: $circuitinboundstate PWE3CircuitState Poll Alarm Yes Warning $NodeDisplayName - Circuit $circuitname is not present. Circuit ID: $circuitid. Description: $circuitdescription. Transmit state: $circuitoutboundstate. Receive state: $circuitinboundstate PWE3CircuitState Poll Alarm Yes Major $NodeDisplayName - Circuit $circuitname lower layer is down. Circuit ID: $circuitid. Description: $circuitdescription. Transmit state: $circuitoutboundstate. Receive state: $circuitinboundstate PWE3CircuitState Poll Alarm Yes Informational $NodeDisplayName - Circuit $circuitname is in the testing state. Circuit ID: $circuitid. Description: $circuitdescription. Transmit state: $circuitoutboundstate. Receive state: $circuitinboundstate ChassisTempAlarm Poll Alarm Yes Normal $NodeDisplayName - Chassis temperature alarm cleared. ChassisTempAlarm Poll Alarm Yes Major $NodeDisplayName - Chassis temperature alarm reported. ChassisTempAlarm Poll Alarm Yes Critical $NodeDisplayName - Chassis temperature is critical. ChassisMajorAlarm Poll Alarm Yes Normal $NodeDisplayName - Chassis major alarm cleared. ChassisMajorAlarm Poll Alarm Yes Major $NodeDisplayName - Chassis has a major alarm. ChassisMinorAlarm Poll Alarm Yes Minor $NodeDisplayName - Chassis has a minor alarm. ChassisMinorAlarm Poll Alarm Yes Normal $NodeDisplayName - Chassis minor alarm cleared. MWTMDatabaseError Poll Alarm No Critical MWTM Database integrity check detected an error. $ErrorString UnknownTrap Trap Event No Informational A trap ($TrapName) was received for node $HostName 1-14

23 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) CPURisingThreshold Trap Event No Warning $NodeDisplayName ($NodeClliCode) - $CPUThresholdClass CPU utilization $TotalCPUUtilization% is above threshold of $RisingThreshold%. Processes: (Pid/Util) $Processes CPUFallingThreshold Trap Event No Normal $NodeDisplayName ($NodeClliCode) - $CPUThresholdClass CPU utilization $TotalCPUUtilization% is below threshold of $FallingThreshold%. HistoryEventConfigDestination Trap Event No Warning The running configuration changed on $NodeDisplayName. Command Source: $ccmhistoryeventcommandsource, Config Source: $ccmhistoryeventconfigsource, Config Destination: running HistoryEventConfigDestination Trap Event No Informational A configuration management event occurred on $NodeDisplayName. Command Source: commandline, Config Source: running, Config Destination: commandsource ConfigManEvent Trap Event No Informational A configuration management event occurred on $NodeDisplayName. Command Source: $ccmhistoryeventcommandsource, Config Source: $ccmhistoryeventconfigsource, Config Destination: $ccmhistoryeventconfigdestination CLIRunningConfigChanged Trap Event No Informational The running configuration on $NodeDisplayName was change via the CLI. Terminal Type: $ccmhistoryeventterminaltype FlashCopyCompletion Trap Event No Informational Flash copy operation complete on $NodeDisplayName. Status: $ciscoflashcopystatus. FlashPartitioningCompletion Trap Event No Informational Flash partitioning operation complete on $NodeDisplayName. Status: $ciscoflashpartitioningstatus. FlashMiscOpCompletion Trap Event No Informational Flash miscellaneous operation complete on $NodeDisplayName. Status: $ciscoflashmiscopstatus. FRU Trap Event No Normal A field replaceable unit was inserted on $NodeDisplayName. Description: $entphysicaldescr FRU Trap Event No Major A field replaceable unit was removed on $NodeDisplayName. Description: $entphysicaldescr SyslogEvent Trap Event No Critical $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. 1-15

24 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) SyslogEvent Trap Event No Critical $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. SyslogEvent Trap Event No Major $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. SyslogEvent Trap Event No Minor $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. SyslogEvent Trap Event No Warning $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. SyslogEvent Trap Event No Warning $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. SyslogEvent Trap Event No Informational $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. SyslogEvent Trap Event No Informational $NodeDisplayName ($NodeSerialNum) - $Facility-$MsgName:$MsgText. AuthenticationFailure Trap Event No Major $NodeDisplayName - authentication failure. $authaddr is accessing this device via wrong community string. AuthenticationFailure Trap Event No Major $NodeDisplayName - authentication failure. $authaddr is accessing this device via wrong community string. ChassisAlarm Trap Event No Major $NodeDisplayName - Chassis alarms reported: Chassis major alarm is $chassismajoralarm, Chassis minor alarm is $chassisminoralarm, Chassis temperature alarm is $chassistempalarm ChassisAlarm Trap Event No Normal $NodeDisplayName - Chassis alarms reported: Chassis major alarm is off, Chassis minor alarm is off, Chassis temperature alarm is off ChassisAlarm Trap Event No Major $NodeDisplayName - Chassis alarms reported: Chassis major alarm is $chassismajoralarm, Chassis minor alarm is $chassisminoralarm, Chassis temperature alarm is $chassistempalarm MemBufferNotify Trap Event No Informational $NodeDisplayName - The peak value for buffer pool $cempmembuffername was updated to $cempmembufferpeak. Loopback Trap Event No Informational $NodeDisplayName - Line placed in loopback from remote. Index=placedInLoopback[2] Loopback Trap Event No Informational $NodeDisplayName - Line taken out of loopback from remote. Index=placedInLoopbackCleared[2] Loopback Poll Event No Informational $NodeDisplayName $ifdescr Line taken out of loopback from remote. Loopback Poll Event No Informational $NodeDisplayName $ifdescr Line placed in loopback from remote. 1-16

25 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) EMM-ServerEvent Trap Event No Informational $NodeDisplayName - EMM event - EMM Policy name: $ceemhistorypolicyname EMM-PolicyEvent Trap Event No Informational $NodeDisplayName - EMM Policy event - Policy Name: $ceemhistorypolicyname. Policy String Data: $ceemhistorypolicystrdata NodeState Poll Event No Normal Node $NodeDisplayName added in state Active/ActiveReason. NodeState Poll Event No Warning Node $NodeDisplayName added in state Warning/WarningReason. NodeState Poll Event No Major Node $NodeDisplayName added in state Unknown/UnknownReason. NodeState Poll Event No Informational Node $NodeDisplayName added in state Unmanaged/UnmanagedReason. NodeState Poll Event No Informational Node $NodeDisplayName added in state $NodeState/$NodeStateReason. NodeState Poll Event No Normal Node $NodeDisplayName changed state from $NodeLastState to Active/ActiveReason. NodeState Poll Event No Warning Node $NodeDisplayName changed state from $NodeLastState to Warning/WarningReason. NodeState Poll Event No Informational Node $NodeDisplayName changed state from $NodeLastState to Unmanaged/UnmanagedReason. NodeState Poll Event No Major Node $NodeDisplayName changed state from $NodeLastState to Unknown/UnknownReason. NodeState Poll Event No Informational Node $NodeDisplayName changed state from $NodeLastState to $NodeState/$NodeStateReason. SnmpTimeout Poll Event No Warning An SNMP timeout occurred polling $NodeDisplayName address $FailedPollAddress. Retrying $NextPollAddress. SnmpTimeout Poll Event No Major An SNMP timeout occurred polling $NodeDisplayName address $FailedPollAddress. No interfaces available for retry. ApplicationError Poll Event No Minor A nonfatal error occured in $Module. $ErrorString ApplicationError Poll Event No Major A Fatal error occured in $Module. $ErrorString GroupState Poll Event No Normal Group $GroupDisplayName added in state Active/ActiveReason. GroupState Poll Event No Warning Group $GroupDisplayName added in state Warning/WarningReason. GroupState Poll Event No Warning Group $GroupDisplayName added in state Unknown/UnknownReason. 1-17

26 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) GroupState Poll Event No Informational Group $GroupDisplayName added in state $GroupState/$GroupStateReason. GroupState Poll Event No Normal Group $GroupDisplayName changed state from $GroupLastState to Active/ActiveReason. GroupState Poll Event No Warning Group $GroupDisplayName changed state from $GroupLastState to Warning/WarningReason. GroupState Poll Event No Warning Group $GroupDisplayName changed state from $GroupLastState to Unknown/UnknownReason. GroupState Poll Event No Informational Group $GroupDisplayName changed state from $GroupLastState to $GroupState/$GroupStateReason. NodeIgnoredSet RtrInterfaceIgnoredSet NodeProcessTrapsSet ObjectModelPurged NodeUserDataUpdated RtrInterfaceUserDataUpdated NodeManagementUpdated DiscoveryRequested PollRequested NodeDeleted RtrInterfaceDeleted FileModification FileModification FileModification User Action User Action User Action User Action User Action User Action User Action User Action User Action User Action User Action User Action User Action User Action Event No Informational Node $NodeDisplayName ignore flag is set to $IgnoredFlag by $User. Event No Informational Interface $NodeDisplayName/$RtrInterfaceDisplayName ignore flag is set to $IgnoredFlag by $User. Event No Informational Node $NodeDisplayName ProcessTraps flag is set to $ProcessTraps by $User. Event No Informational Nodes purged by $User. Event No Informational Node $NodeDisplayName edited by user $User. Event No Informational Interface $NodeDisplayName/$RtrInterfaceDisplayName edited by user $User. Event No Informational Node $NodeDisplayName has been $ManagementState by user $User. Event No Informational Discovery for $Seed, recursion depth $Recursion, requested by user $User. Event No Informational Poll for $NodeDisplayName requested by user $User. Event No Informational Node $NodeDisplayName deleted by user $User. Event No Informational Interface $NodeDisplayName/$RtrInterfaceDisplayName deleted by user $User. Event No Informational The file $File was $Action by $User. Event No Informational The file $File was $Action by $User. Event No Informational The file $File was $Action by $User. 1-18

27 Chapter 1 Common Alarms Table 1-1 Common Alarms (continued) Login User Event No Normal $User login Successful from $Host. Action Login User Action Event No Minor $User login Failed from $Host. Login Logout Logout Logout LaunchTerminal LaunchTerminal GroupIgnoredSet GroupUserDataUpdated GroupUserDeleted User Action User Action User Action User Action User Action User Action User Action User Action User Action Event No Minor $User login from $Host was not allowed because the account is disabled. Event No Normal $User logout from $Host. Event No Minor $User logout from $Host. The connection between client and server was lost. Event No Normal $User logout from $Host. Client logout because a new session was started by the user. Event No Normal $User launched Telnet to $Host. Event No Normal $User launched SSH to $Host. Event No Informational Group $GroupDisplayName ignore flag is set to $IgnoredFlag by $User. Event No Informational Group $GroupDisplayName edited by user $User. Event No Informational Group $GroupDisplayName deleted by user $User. 1-19

28 Chapter 1 Common Alarms 1-20

29 CHAPTER 2 BWG Alarms Revised: 3/3/10, This chapter contains a list of the alarms for the Broadband Wireless Gateway (BWG) that the Cisco Mobile Wireless Transport Manager supports. Table 2-1 BWG Alarms Name Source Type Clear Severity Message Text AAAServerState Poll Alarm Yes Normal $NodeDisplayName - a AAA server is 'up' Poll Alarm Yes Major $NodeDisplayName - a AAA server is 'dead' BWGBaseStationsThreshold Poll Alarm Yes Critical $NodeDisplayName - Current number of base stations on BWG Poll Alarm Yes Major $NodeDisplayName - Current number of base stations on BWG Poll Alarm Yes Warning $NodeDisplayName - Current number of base stations on BWG Poll Alarm Yes Normal $NodeDisplayName - Current number of base stations on BWG 2-1