EN - Available documents withdrawn between and

Transcription

1 EN - Available documents withdrawn between and Standard reference Withdrawal date English title CEN ISO/TS : Well integrity - Part 2: Well integrity for the operational phase (ISO/TS :2014) CEN ISO/TS 17427: Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) CEN ISO/TS : Geotechnical investigation and testing - Laboratory testing of soil - Part 12: CEN ISO/TS Determination of Atterberg limits :2004/AC:2005 (ISO/TS :2004) CEN/TR : Child use and care articles - General safety guidelines - Part 2: Chemical hazards CEN/TR : Child use and care articles - General safety guidelines - Part 3: Mechanical hazards CEN/TS : Design of fastenings for use in concrete - Part 4-1: General CEN/TS : Design of fastenings for use in concrete - Part 4-2: Headed Fasteners CEN/TS : Design of fastenings for use in concrete - Part 4-3: Anchor channels CEN/TS : Design of fastenings for use in concrete - Part 4-4: Post-installed fasteners - Mechanical systems CEN/TS : Design of fastenings for use in concrete - Part 4-5: Post-installed fasteners - Chemical systems CEN/TS : Security Requirements for Trustworthy Systems Supporting Server Signing EN 10221: Surface quality classes for hot-rolled bars and rods - Technical delivery conditions EN : Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking Replaced by See Resolution CEN/BT C088/2018 EN ISO :2018 EN ISO :2018 CEN/TR :2018 CEN/TR :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN ISO 9443:2018 EN ISO :2018 1

2 Standard reference Withdrawal date English title EN : Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking EN : Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing EN : Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids EN :2004 EN :2004/AC: Glass in Building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description EN : Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration EN : Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances EN : Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals EN :2005+A2: Glass in building - Insulating glass units - Part 5: Evaluation of conformity EN : Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests EN 12809: Residential independent boilers fired by EN 12809:2001/A1:2004 solid fuel - Nominal heat output up to 50 kw - Requirements and test methods EN 12809:2001/A1:2004/AC: 2007 EN 12809:2001/AC:2006 EN 12815: Residential cookers fired by solid fuel - EN 12815:2001/A1:2004 Requirements and test methods EN 12815:2001/A1:2004/AC: 2007 EN 12815:2001/AC:2006 Replaced by EN ISO :2018 EN ISO :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 EN :2018 2

3 Standard reference Withdrawal date English title EN 12972: Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks EN 13229: Inset appliances including open fires EN 13229:2001/A1:2003 fired by solid fuels - Requirements and test methods EN 13229:2001/A2:2004 EN 13229:2001/A2:2004/AC: 2007 EN 13229:2001/AC:2006 EN 13229:2001/A2:2004/AC: 2006 EN 13240: Roomheaters fired by solid fuel - EN 13240:2001/A2:2004 Requirements and test methods EN 13240:2001/A2:2004/AC: 2007 EN 13240:2001/AC:2006 EN 13317:2002+A1: Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly EN 13704: Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) EN 14025:2013+A1: Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction EN : Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment EN : High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies EN : High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut Replaced by EN 12972:2018 EN :2018 EN :2018 EN 13317:2018 EN 13704:2018 EN 14025:2018 EN :2018 EN :2018 EN :2018 3

4 Standard reference Withdrawal date assemblies English title EN 15860: Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods Replaced by EN 15860:2018 EN 1616: Sterile urethral catheters for single use EN ISO 20696:2018 EN 1616:1997/A1:1999 EN 1617: Sterile drainage catheters and accessory devices for single use EN 16726: Gas infrastructure - Quality of gas - Group H EN : Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength EN : Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification EN 9115: Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) EN ISO 10042: Welding - Arc-welded joints in aluminium and its alloys - Quality levels EN ISO 10042:2005/AC:2006 for imperfections (ISO 10042:2005) EN ISO 10477: Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004) EN ISO 10927: Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011) EN ISO : Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO :2007) EN ISO 15138: Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) EN ISO 15612: Specification and qualification of welding procedures for metallic EN ISO 20697:2018 EN 16726:2015+A1:2018 EN :2018 EN :2018 EN 9115:2018 EN ISO 10042:2018 EN ISO 10477:2018 EN ISO 10927:2018 EN ISO :2018 EN ISO 15138:2018 EN ISO 15612:2018 4

5 Standard reference Withdrawal date English title materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) EN ISO 15952: Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2006) EN ISO 16151: Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, ''dry'' and ''wet'' conditions (ISO 16151:2005) EN ISO 1716: Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) EN ISO 17708: Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003) EN ISO 19011: Guidelines for auditing management systems (ISO 19011:2011) EN ISO : Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and formalin extraction of earthworms (ISO :2006) EN ISO : Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2008) EN ISO : Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO :2008) EN ISO 3949: Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009) EN ISO 4048: Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content (ISO 4048:2008) EN ISO 4098: Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter (ISO 4098:2006) EN ISO 4264: Petroleum products - Calculation of EN ISO 4264:2007/A1:2013 cetane index of middle-distillate fuels by Replaced by EN ISO 15952:2018 EN ISO 16151:2018 EN ISO 1716:2018 EN ISO 17708:2018 EN ISO 19011:2018 EN ISO :2018 EN ISO :2018 EN ISO :2018 EN ISO 3949:2018 EN ISO 4048:2018 EN ISO 4098:2018 EN ISO 4264:2018 5

6 Standard reference Withdrawal date English title the four-variable equation (ISO 4264:2007) Replaced by EN ISO 4957: Tool steels (ISO 4957:1999) EN ISO 4957:2018 EN ISO : Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO :2007) EN ISO : Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO :2007) EN ISO :2018 EN ISO :2018 EN ISO 6875: Dentistry - Patient chair (ISO 6875:2011) EN ISO :2018 EN ISO : Dentistry - Dental units - Part 1: General requirements and test methods (ISO :2011) EN ISO 7590: Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2009) EN ISO :2018 EN ISO 7590:2018 6

7 CENELEC - Monthly list of publications made available July 2018 From these 17 documents, ENs have to be implemented by the specified date INFORMATION CONCERNING THE IMPLEMENTATION IS TO BE DELIVERED THROUGH iprojex Publication date EN 50059:2018 DAV: DOA: WI: EN :2017/A1:2018 DAV: DOA: WI: EN :2018 DAV: DOA: WI: EN :2018 DAV: DOA: WI: EN 50594:2018 DAV: DOA: WI: CLC/TR :2018 DAV: DOA: WI: EN 50640:2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: Publication title Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials Overhead electrical lines exceeding AC 1 kv - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN :2012) Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN single-mode B1 or B6 fibre for Category C according to EN General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Building Resource manager - General Requirements and Architecture Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for commercial use Collection, logistics & treatment requirements for WEEE - Part 6: Report on the alignment between Directive 2012/19/EU and EN series standards and EN Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intended for commercial use Explosive atmospheres - Part 0: Equipment - General requirements Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at 1

8 CENELEC - Monthly list of publications made available Publication date WI: EN IEC :2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: WI: EN IEC 62046:2018 DAV: DOA: WI: EN :2016/A1:2018 DAV: DOA: WI: EN IEC :2018 DAV: DOA: WI: Publication title frequencies in the range 20 Hz to 100 khz by the use of ring specimens Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures Safety of machinery - Application of protective equipment to detect the presence of persons Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC and IEC series - Part 2: Method for the determination of forced air cooling 2

9 C E NE L E C - P ublications forecas t for Augus t 2018 Total:52 WI number Standard reference Forecasted date EN : EN :2012/A1: EN IEC : EN IEC : EN IEC : EN IEC 60238:2018/ A1: EN :2013/A1: EN IEC : EN IEC : JT EN : EN IEC 61265: EN :2013/A2: EN :2010/A2: EN :2003/A11: EN :2003/A11: EN :2010/A11: EN :2016/A11: FprEN 50318: EN :2010/FprA2: EN IEC 60375: EN :2010/A1: EN : EN : EN IEC : FprEN : JT FprEN ISO EN IEC 60376: EN IEC : EN IEC : EN IEC 63032: EN IEC :

10 WI number Standard reference Forecasted date EN IEC : EN :2014/FprA1: EN IEC : EN :1998/A2: FprEN : EN IEC : EN IEC : EN IEC : EN IEC 60900: EN IEC : EN IEC : EN : EN IEC : CLC/ TR : CLC/ TR : CLC/ TR : EN :2014/A1: EN IEC : EN IEC : EN 50556: EN IEC : CE NE L E C - P ublications forecas t for S eptember 2018 Total:20 WI number Standard reference Forecasted date FprEN : EN :2015/prA1: FprEN : EN :2010/FprA1: EN :2012/FprA1: FprEN : FprEN 62853: pren :

11 WI number Standard reference Forecasted date CLC/ TS : FprEN : EN 60705:2015/FprA2: EN :2015/FprA1: FprEN : pren : FprEN 61167: pren : EN :2011/prA1: EN :2014/prA1: pren : FprEN :

12 CEN - Monthly list of publications made available July 2018 From these 86 documents, ENs have to be implemented by INFORMATION CONCERNING THE IMPLEMENTATION IS TO BE DELIVERED THROUGH iprojex Publication date EN :2018 DAV: DOA: WI: EN ISO 374-1:2016/A1:2018 WI: EN :2018 DAV: DOA: WI: EN :2018 WI: EN :2018 WI: EN :2018 WI: EN :2018 WI: EN : WI: EN :2018 WI: Publication title Trustworthy Systems Supporting Server Signing - Part 1: General System Security Requirements Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018) Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and coldformed structures for roof, ceiling, floor and wall applications Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts Glass in building - Insulating glass units - Part 5: Product standard Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests 1

13 CEN - Monthly list of publications made available Publication date EN ISO 1716:2018 WI: EN 2279:2018 WI: EN 2280:2018 WI: EN 2319:2018 WI: EN 2387:2018 WI: EN 2799:2018 WI: EN :2018 WI: EN ISO :2018 WI: CSM11096 EN ISO 3949:2018 WI: EN ISO 4048:2018 WI: Publication title Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018) Aerospace series - Steel FE-PM MPa Rm MPa - Forgings - De 150 mm Aerospace series - Steel FE-PM MPa Rm MPa - Sheet - a 6 mm Aerospace series - Aluminium alloy T Drawn bar - a 75 mm Aerospace series - Aluminium alloy 2014A- - T6 - Tubes for structures - 0,6 mm a 12,5 mm Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO :2018) Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2018) Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content (ISO 4048:2018) 2

14 CEN - Monthly list of publications made available Publication date EN ISO 4098:2018 WI: EN ISO 4264:2018 WI: EN 4510:2018 WI: EN :2018 WI: EN 4832:2018 WI: EN 4833:2018 WI: EN :2018 WI: EN ISO 4957:2018 WI: EC EN ISO :2018 WI: EN ISO :2018 WI: Publication title Leather - Chemical tests - Determination of water-soluble matter, watersoluble inorganic matter and water-soluble organic matter (ISO 4098:2018) Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation (ISO 4264:2018) Aerospace series - Pipe couplings, 60, spherical, in titanium alloy TI- P64001, adapters, straight, double end, with locking ring Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification Aerospace series - Adaptor, Pipe coupling 24 Cone up to kpa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer - Inch Series - Technical specification Aerospace series - Pipe coupling 24 Cone up to kpa (5 080 psi) Ring-locked fitting - Flareless End - Inch Series - Extra Fine Thread Pitch Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A V a.c. 400 Hz constant frequency - Part 004: With signal contact - Product standard Tool steels (ISO 4957:2018) Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO :2018) Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO :2018) 3

15 CEN - Monthly list of publications made available Publication date EN ISO :2018 WI: EN ISO 7590:2018 WI: EN 9115:2018 WI: EN :2018 WI: EN :2018 WI: EN ISO 9443:2018 WI: EC EN ISO 10042:2018 WI: EN ISO :2015/A1:2018 DAV: DOA: WI: EN ISO :2015/A1:2018 DAV: DOA: WI: EN ISO 10477:2018 DAV: DOA: WI: Publication title Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements (ISO :2018) Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018) Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 115: Explicit CAD assembly structure Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018) Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018) Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO :2015/Amd 1:2018) Geosynthetics - Part 2: Symbols and pictograms - Amendment 1 (ISO :2015/Amd 1:2018) Dentistry - Polymer-based crown and veneering materials (ISO 10477:2018) 4

16 CEN - Monthly list of publications made available Publication date EN ISO :2018 WI: EN ISO :2018 WI: EN ISO :2018 WI: EN ISO 10927:2018 WI: EN ISO 11070:2014/A1:2018 DAV: DOA: WI: EN :2018 DAV: DOA: WI: EN :2018/AC:2018 DAV: DOA: WI: 00249C27 EN 12972:2018 DAV: DOA: WI: EN 13317:2018 WI: CEN/TR :2018 DAV: DOA: WI: Publication title Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO :2018) Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO :2018) Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO :2018) Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF- MS) (ISO 10927:2018) Sterile single-use intravascular introducers, dilators and guidewires - Amendment 1 (ISO 11070:2014/Amd 1:2018) Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly Child care articles - General safety guidelines - Part 2: Chemical hazards 5

17 CEN - Monthly list of publications made available Publication date CEN/TR :2018 DAV: DOA: WI: EN 13704:2018 WI: EN 14025:2018 WI: EN :2018 WI: EN :2018 WI: EN :2018 WI: EN ISO 15138:2018 WI: EN ISO 15612:2018 WI: EN 15860:2018 WI: EN ISO 15952:2018 WI: Publication title Child care articles - General safety guidelines - Part 3: Mechanical hazards Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2018) Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018) Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO 15952:2018) 6

18 CEN - Monthly list of publications made available Publication date EN ISO 16151:2018 WI: EN 16236: WI: EN : WI: EN 16726:2015+A1:2018 WI: EN 16755:2017/AC:2018 DAV: DOA: WI: 00175C11 CEN/TS :2018 WI: CEN/TS :2017/AC:2018 DAV: DOA: WI: 00434C01 CEN/TR :2018 DAV: DOA: WI: CEN/TR :2018 DAV: DOA: WI: EN 17155:2018 WI: Publication title Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018) Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control Residential solid fuel burning appliances - Part 1: General requirements and test methods Gas infrastructure - Quality of gas - Group H Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications Molecular in vitro diagnostic examinations - Specifications for preexamination processes for snap frozen tissue - Part 3: Isolated DNA Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC (UBL 2.1) invoice and credit note Electronic public procurement - Business interoperability interfaces (BII), e-ordering - Part 101: Overview Electronic public procurement - Business interoperability interfaces (BII), e-fulfilment - Part 101: Overview Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber 7

19 CEN - Monthly list of publications made available Publication date CEN/TS 17195:2018 WI: CEN/TS 17196:2018 WI: CEN/TS 17197:2018 WI: CEN/TS 17200:2018 WI: CEN/TS 17201:2018 WI: CEN/TR 17207:2018 DAV: DOA: WI: CWA 17316:2018 DAV: DOA: WI: WSSMA001 EN ISO :2018 WI: EN ISO 17708:2018 WI: EN ISO :2018 WI: Publication title Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES) Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests Playground and recreational areas - Framework for the competence of playground inspectors Smart CE marking for construction products Intelligent transport systems - Cooperative ITS - Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO :2018) Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018) Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO :2018) 8

20 CEN - Monthly list of publications made available Publication date EN ISO 18593:2018 WI: EN ISO 19011:2018 DAV: DOA: WI: CSF20060 EN ISO :2018 WI: EN ISO :2018 WI: EN ISO 20696:2018 DAV: DOA: WI: EN ISO 20697:2018 DAV: DOA: WI: EN ISO :2018 WI: Publication title Microbiology of the food chain - Horizontal methods for surface sampling (ISO 18593:2018) Guidelines for auditing management systems (ISO 19011:2018) Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2018) Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO :2018) Sterile urethral catheters for single use (ISO 20696:2018) Sterile drainage catheters and accessory devices for single use (ISO 20697:2018) Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and extraction of earthworms (ISO :2018) 9

21 CEN - Publications forecast for August 2018 Total:97 WI number Standard reference Forecasted date EN ISO :2013/ A1: EN : EN 16232:2013+A1: EN 4835: EN 4836: EN ISO 11238: CEN/ TR 17231: EN 17119: EN 16781: EN 16780: CEN/ TS 17171: CEN/ TS 17174: EN ISO :2013/ A1: EN ISO :2013/ A1: EN 12830: EN 2796: EN 2541: EN 2540: EN : CEN/ TS 17184: EN 4834: EN 54-7: EN :2014/A3:201X FprEN ISO EN : EN ISO 15384: EN 54-5:2017+A1: EN 6126: EN : EN 6109: EN 17001:

22 WI number Standard reference Forecasted date EN 17002: EN : EN 3719: EN : EN : EN 13507: EN : EN : EN 9278: EN : EN : EN : EN 16167: EN 12131: EN 1885: EN : EN : EN : CEN/ TS 17198: EN : EN : pren ISO EN 1563: EN 358: FprEN ISO EN : EN 927-6: EN : EN 13497: EN 17101: EN 14458: JT EN : EN :

23 WI number Standard reference Forecasted date EN 15293: EN 12519: CEN/ TS 16818: EN :2014/A1: EN : EN : EN 13756: pren ISO A0G pren ISO rev EN 1400:2013+A2: EN 13088: EN 12130: CEN/ TS 16675: EN : EN : EN 2084: EN : EN : EN 2031: JT FprEN ISO WS prcwa EN 12733: EN :2016+A1: CEN/ TR 17244: CEN/ TR 17245: EN 14596: EN 2475: EN 17093: EN 17115: EN : EN : EN : EN 17110:

24 CEN - Publications forecast for September 2018 Total:20 WI number Standard reference Forecasted date EN :2014+A1: EN 2880: EN 2878: FprCEN/ TR EN ISO :1999/ FprA EN :2014+A1: CEN/ TS : EN :2015+A1: EN :2015+A1: EN : EN :2014+A2: EN : EN : EN : EN : EN : FprCEN/ TS FprEN EC FprEN FprEN

25 CEN - Withdrawals forecast for August 2018 Total:53 WI number Standard reference Forecasted date EN 15614: EN 3719: EN : EN 54-7: EN 13507: EN 54-5: EN ISO 13769: EN 12131: EN 1563: EN 13497: EN : EN : EN :2005+A1: EN : EN : EN : EN : EN ISO 1856:2000/A1: EN 1888: EN 16167: CEN/TS : EN 358: EN ISO 1856: EN : EN :2001+A1: EN 14458: EN 927-6: EN 1885: EN :2007+A1: CEN/TS 15293: EN :

26 WI number Standard reference Forecasted date CEN/TS 16675: EN 2084: EN : EN : EN : EN 1400:2013+A1: EN ISO 8307: EN : C11 EN ISO :2002/AC: EN 12519: JT EN ISO 50001: EN ISO : EN 13756: EN 12130: EN 13088: EN 14596: EN : C23 EN :2016/AC: WS CWA : EN 12733:2001+A1: EN : EN : CEN - Withdrawals forecast for September 2018 Total:13 WI number Standard reference Forecasted date EN : EN : EN : EN : EN : EN :2014+A1: EN 13814:

27 WI number Standard reference Forecasted date EN : EN : EC EN 10164: EN 1647: CEN/TR : CEN/TR :

28 CENELEC - Withdrawals forecast for August 2018 Total:12 WI number Standard reference Forecasted date EN : EN : EN 50180: EN : EN : EN 60836: EN : EN : EN : EN : EN : EN : CENELEC - Withdrawals forecast for September 2018 Total:25 WI number Standard reference Forecasted date EN : EN : EN :1998/A2: EN :1998/A1: EN 61938: EN :1998/A1: EN 60789: EN : EN : EN : EN 50200: EN : EN : EN :

29 WI number Standard reference Forecasted date 7612 EN :1995/A1: EN : EN : EN :1996/A1: EN : EN : EN :1998/A1: EN 61174: EN : EN : EN :

30 CENELEC - Available documents withdrawn between and Standard reference Withdrawal date English title CLC/TS 50562: Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems EN : Sectional Specification: Radio frequency coaxial connectors - Series MMCX EN 50066: Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles EN : Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test EN : Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation EN : Explosive atmospheres - Part 7: Equipment protection by increased safety "e" EN : Hearing aids - Part 0: Measurement of EN :1993/A1:1994 electroacoustical characteristics EN : Hearing aids - Part 1: Hearing aids with EN :1995/A1:1998 induction pick-up coil input EN : Hearing aids - Part 2: Hearing aids with EN :1995/A2:1997 automatic gain control circuits EN : Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids EN : Series capacitors for power systems - Part 1: General EN : Series capacitors for power systems - Part 3: Internal fuses EN : Appliance couplers for household and similar general purposes - Part 1: EN :2001/A1:2007 General requirements EN : Household and similar electrical EN :2003/A1:2005 appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers EN :2003/A2:2008 and similar appliances Replaced by EN 50562:2018 EN :2015 See Resolution D160/C045 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN : Resin based reactive compounds used EN :2015 1

31 Standard reference Withdrawal date English title for electrical insulation - Part 2: Methods of test EN : Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems EN : Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres EN :2002 EN :2002/A1: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test EN : Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection EN : Function Blocks (FB) for process control - Part 3: Electronic Device Description Language (EDDL) EN : Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C) EN : Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) HD : Co-ordination of electrical equipment for protection, isolation, switching and control HD : Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear Replaced by EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 EN :2015 HD :2015 HD :2015 2