CE TYPE EXAMINATION CERTIFICATE
|
|
|
- Kelley Sims
- 5 years ago
- Views:
Transcription
1 In application of the directive 89/686/EEG of 21 December 1989 concerning the harmonisation of the Member States legislation relative to personal protective equipment, Centexbel Notified body 0493 authorised by decree AV/OA235/ST dated of the Ministry of Employment and Labour has issued CE TYPE EXAMINATION CERTIFICATE Nr. 031/2016/0550 This CE Type examination certificate is valid until 23 Jun 2021 to: for: ROOTS for Safety bv, Hoogvliet Rotterdam Bodywarmer HVFRACHR-B2-03 The personal protective equipment above mentioned satisfies the applicable essential safety requirements of the Directive. For the argumentation, the following standards are used: EN :2008 EN 343:2003+A1:2007 EN 13034:2005+A1:2009 EN ISO20471:2013 EN ISO 13688:2013 EN ISO 11612:2015 EN ISO 11611:2015 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements Protective clothing - Protection against rain Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB[6]) High visibility clothing - Test methods and requirements Protective clothing - General requirements Protective Clothing - Clothing to protect against heat and flame - Minimum performance requirements Protective clothing for use in welding and allied processes This is PPE of category III, subject to regular checks in accordance with article 11 of the European PPE directive. In agreement with the manufacturer s choice random checks shall be carried out to assess the quality of the final product (art.11a). The manufacturer must be able, on request, to present the test report of this quality control check. A first quality control checkshallbeperformedatthelateston31 Dec 2017 and at least be repeated with intervals of one year. This declaration applies to the equipment as submitted in the typetestinganddescribedinthe manufacturer s technical file that is registered with number Issued by Centexbel, Notified Body 0493 (*),inghent,on23jun2016 Inge De Witte Certification Manager Attached: 1 Annex *) Recognized by decree AV/OA235/ST of of the Ministry oflaborandemployment
2 ANNEX Annex - cer(ficate 031/2016/0550 Page 1 of 16 CE TYPE EXAMINATION CERTIFICATE Nr. 031/2016/ Applica(on ROOTS for Safety bv Mandenmakerstraat DA Hoogvliet Rotterdam Netherlands 2. Descrip(on EN :2008 EN 13034:2005+A1:2009 Type PB[6] EN 343:2003+A1:
3 Annex - cer(ficate 031/2016/0550 Page 2 of 16 EN ISO 20471: EN ISO 11612:2015 A1 B1 C1 D0 E3 F1 EN ISO 11611:2015 A1 Class 2 3. Materials and Outer fabric SBXWP Lining FLA 185 lining Reflective Tape Gio-Lite FR120 Loxylight 9801 MR-3591S StoNor ref trim
4 Vizlite 301 Annex - cer(ficate 031/2016/0550 Page 3 of 16 Transfert Roots FR Rubber Badge Zipper Zipper gold/black Press button Press Button Roots Button Plastic button Roots Seam SBXWP with seam Assembly SBXWP + FLA185 Fluorescent material SBXWP HV Yellow Contrast fabric outer SBXWP Navy Contrast fabric inner FLA 185 lining Black
5 4. Technical documenta(on Annex - cer(ficate 031/2016/0550 Page 4 of 16 Summary test results EN :2008 Outer fabric SBXWP EN Surface Resistivity / / EN :2004 methode 2 Measurement of charge decay EN 343:2003+A1:2007 Outer fabric SBXWP ISO 5077 Dimensional stability EN original Resistance water penetration ISO ISO Tensile strenght and elongation ISO 4674:2003 Tear resistance EN Water-vapour resistance Class 3 EN after Resistance water penetration Class 3 washing EN after Resistance water penetration Class 3 abrasion EN after flexing Resistance water penetration Class 3 EN after fuel Resistance water penetration Class 3 EN after oil Resistance water penetration Class 3 EN on seam Resistance water penetration Class 3 EN 13034:2005+A1:2009 Outer fabric SBXWP EN 530 Methode2 Abrasion resistance Class 6 ISO Tear resistance trapezoidal Class 2 EN ISO Tensile strength and elongation Class 5 EN 863 Puncture resistance Class 3 EN 368 repellency Liquid repellency Class 3 H2SO4 EN 368 penetration o- Liquid penetration Class 3 xylene ISO 5077 Dimensional change of woven textile mat. EN 368 repellency NaOH Liquid repellency Class 3
6 EN 368 repellency o- xylene EN 368 repellency butan-1-ol EN 368 penetration H2SO4 EN 368 penetration NaOH EN 368 penetration butan-1-ol Annex - cer(ficate 031/2016/0550 Page 5 of 16 Liquid repellency Class 3 Liquid repellency Class 3 Liquid penetration Class 3 Liquid penetration Class 3 Liquid penetration butan-1-ol Class 3 EN ISO 13688:2013 Outer fabric SBXWP ISO 1413 textiel ph EN :2003 Arylamines ISO 5077 Dimensional stability EN ISO 11612:2015 Outer fabric SBXWP ISO 6330 / / ISO Heat Resistance 180 C ISO Tensile strength ISO :2000 Tear strength ISO 5077 Dimensional change of woven textile mat. ISO Procedure Flame spread on original fabric A1 A-onoriginalfabric Procedure A ISO 9151 Convective Heat (B) B1 ISO 6942 method B Radiant Heat (C) C1 ISO 9185 Molten Aluminium splash (D) / / ISO 9185 Molten iron splash (E) E3 ISO (250 C) Contact heat (F) F1 Procedure A - after pretreatment Procedure B - on original material Flame spread Procedure A Flame spread Procedure B / / / / Flame spread on pre-treated fabric / / A1
7 Procedure B - after pretreatment Procedure B Annex - cer(ficate 031/2016/0550 Page 6 of 16 EN ISO 11611:2015 Outer fabric SBXWP ISO 6330 / / ISO 6942 Heat transfer Class 2 EN electrical resistance ISO 5077 Dimensional change of woven textile mat. ISO Procedure Flame spread on original fabric A1 A-onoriginalfabric Procedure A Procedure B - after pretreatment Flame spread on pre-treated fabric Procedure B / / Procedure A - after pretreatment Procedure B - on original material Flame spread Procedure A Flame spread Procedure B / / ISO 9150 impact of spatter Class 2 ISO Tear strength Class 2 ISO Tensile strength / / A1 EN ISO 13688:2013 Lining FLA 185 lining ISO 1413 textiel ph EN :2003 Arylamines ISO 5077 Dimensional stability EN ISO 11612:2015 Lining FLA 185 lining ISO Heat Resistance 180 C ISO 5077 Dimensional change of woven textile mat.
8 ISO 5077 ISO Procedure A-onoriginalfabric Procedure A - after pretreatment Procedure B - on original material Dimensional change of knitted material Flame spread on original fabric Procedure A Flame spread Procedure A Flame spread Procedure B Annex - cer(ficate 031/2016/0550 Page 7 of 16 A1 A1 Procedure B - after pretreatment Flame spread on pre-treated fabric Procedure B EN ISO 11611:2015 Lining FLA 185 lining ISO 5077 Dimensional change of woven textile mat. ISO Procedure Flame spread on original fabric A1 A-onoriginalfabric Procedure A Procedure B - after pretreatment Flame spread on pre-treated fabric Procedure B / / Procedure A - after pretreatment Procedure B - on original material Flame spread Procedure A Flame spread Procedure B / / / / A1 EN ISO20471:2013 Reflective Tape Loxylight 9801 CIE54.2 Retroreflective performances EN ISO20471:2013 Reflective Tape MR-3591S
9 Annex - cer(ficate 031/2016/0550 Page 8 of 16 CIE54.2 Retroreflective performances level 2 EN ISO20471:2013 Reflective Tape Gio-Lite FR120 CIE54.2 Retroreflective performances EN ISO20471:2013 Reflective Tape Vizlite 301 CIE54.2 Retroreflective performances level 2 EN ISO20471:2013 Reflective Tape StoNor ref trim CIE54.2 Retroreflective performances EN ISO 11612:2015 Reflective Tape Loxylight Flame spread op hardware + labels, badges, reflective / / EN ISO 11612:2015 Reflective Tape MR-3591S - Flame spread op hardware + labels, badges, reflective
10 EN ISO 11612:2015 Reflective Tape Gio-Lite FR120 Annex - cer(ficate 031/2016/0550 Page 9 of 16 - Flame spread op hardware + labels, badges, reflective A1 EN ISO 11612:2015 Reflective Tape Vizlite Flame spread op hardware + labels, badges, reflective A1 EN ISO 11612:2015 Reflective Tape StoNor ref trim - Flame spread op hardware + labels, badges, reflective EN ISO 11611:2015 Reflective Tape Loxylight Flame spread op hardware + labels, badges, reflective / / EN ISO 11611:2015 Reflective Tape MR-3591S - Flame spread op hardware + labels, badges, reflective
11 Annex - cer(ficate 031/2016/0550 Page 10 of 16 EN ISO 11611:2015 Reflective Tape Gio-Lite FR120 - Flame spread op hardware + labels, badges, reflective A1 EN ISO 11611:2015 Reflective Tape Vizlite Flame spread op hardware + labels, badges, reflective A1 EN ISO 11611:2015 Reflective Tape StoNor ref trim - Flame spread op hardware + labels, badges, reflective EN ISO 11612:2015 Transfert Roots FR Rubber Badge - Flame spread op hardware + labels, badges, reflective EN ISO 11611:2015 Transfert Roots FR Rubber Badge
12 Annex - cer(ficate 031/2016/0550 Page 11 of 16 ISO Procedure Flame spread on original fabric A-onoriginalfabric Procedure A - Flame spread op hardware + labels, badges, reflective EN ISO 11612:2015 Zipper Zipper gold/black ISO 6330 / / ISO Heat Resistance 180 C - Flame spread op hardware + labels, badges, reflective EN ISO 11611:2015 Zipper Zipper gold/black ISO 6330 / / - Flame spread op hardware + labels, badges, reflective EN ISO 11612:2015 Press button Press Button Roots ISO Heat Resistance 180 C - Flame spread op hardware + labels, badges, reflective EN ISO 11611:2015 Press button Press Button Roots - Flame spread op hardware + labels, badges, reflective
13 Annex - cer(ficate 031/2016/0550 Page 12 of 16 EN ISO 11612:2015 Button Plastic button Roots ISO Heat Resistance 180 C - Flame spread op hardware + labels, badges, reflective / / EN ISO 11611:2015 Button Plastic button Roots - Flame spread op hardware + labels, badges, reflective EN 343:2003+A1:2007 Seam SBXWP with seam EN ISO Seam strength EN on seam Resistance water penetration Class 3 EN 13034:2005+A1:2009 Seam SBXWP with seam ISO Seam strength Class 5 EN ISO 11612:2015 Seam SBXWP with seam ISO 6330 / / ISO Seam strength seam Flame spread on seam
14 Annex - cer(ficate 031/2016/0550 Page 13 of 16 / / EN ISO 11611:2015 Seam SBXWP with seam ISO 6330 / / seam Flame spread on seam ISO Seam strength / / EN 343:2003+A1:2007 Assembly SBXWP + FLA185 EN Water-vapour resistance Class 2 EN ISO20471:2013 Fluorescent material SBXWP HV Yellow ISO 5077 Dimensional stability ISO (coated Tensile strength fabric) ISO 4674:2003 method Tear resistance A EN Water vapour resistance Ret / / EN ISO Thermal resistance Rct / / Chromaticity Chromaticity on original ISO 105 X12 fluo Colour fastness to rubbing ISO 105 E04 Colourfastness to perspiration ISO 105 D01 Colour fastness to dry-cleaning ISO 105 N01 Colour fastness by bleaching / / ISO 105 C06 Colour fastness by washing / / ISO 105 X11 Colourfastness to ironing / / Chromaticity Chromaticity after xenon Chromaticity Chromaticity after maximum number of washing cycles
15 EN ISO 13688:2013 Fluorescent material SBXWP HV Yellow Annex - cer(ficate 031/2016/0550 Page 14 of 16 ISO 1413 textiel ph EN :2003 Arylamines ISO 5077 Dimensional stability EN ISO20471:2013 Contrast fabric outer SBXWP Navy ISO 5077 Dimensional stability ISO (coated Tensile strength fabric) ISO 4674:2003 method Tear resistance A EN Water vapour resistance Ret / / EN ISO Thermal resistance Rct / / ISO 105 X12 contrast Colour fastness to rubbing ISO 105 E04 contrast Colourfastness to perspiration ISO 105 D01 contrast Colour fastness to dry-cleaning ISO 105 C06 contrast Colour fastness by washing ISO 105 X11 contrast Colourfastness to ironing / / EN ISO 13688:2013 Contrast fabric outer SBXWP Navy ISO 1413 textiel ph EN :2003 Arylamines ISO 5077 Dimensional stability EN ISO20471:2013 Contrast fabric inner FLA 185 lining Black ISO 5077 Dimensional stability EN Water vapour resistance Ret / / ISO 105 X12 contrast Colour fastness to rubbing ISO 105 E04 contrast Colourfastness to perspiration ISO 105 D01 contrast Colour fastness to dry-cleaning ISO 105 C06 contrast Colour fastness by washing ISO 105 X11 contrast Colourfastness to ironing / /
16 Annex - cer(ficate 031/2016/0550 Page 15 of 16 EN ISO 13688:2013 Contrast fabric inner FLA 185 lining Black ISO 1413 textiel ph EN :2003 Arylamines ISO 5077 Dimensional stability
17 Description/Picture of article Annex - cer(ficate 031/2016/0550 Page 16 of 16 The above picture is a general picture of the article. Possible variations of the above article can be present in the technical file. Note : Any modification in material, design, or other technical features must be brought to the attention of the Notified Body.
CE TYPE EXAMINATION CERTIFICATE
In application of the directive 89/686/EEG of 21 December 1989 concerning the harmonisation of the Member States legislation relative to personal protective equipment, Centexbel Notified body 0493 authorised
SCOPE OF ACCREDITATION. High-visibility clothing EC type examination LST EN ISO 20471:2013. EC type examination LST EN ISO 11611:2008
Annex 2 to the Accreditation Certificate No. LA.01.048 issued on 02-07-2013, Page 1 of 2 DEPARTMENT of TEXTILES PHYSICAL-CHEMICAL TESTING Notified body No.1401 of Textile Institute of State scientific
List of tests (2018)
SRI Center for Physical Sciences and Technology Textile Institute Department of Textiles Physical-Chemical testing List of tests (2018) 1. Fibre content analysis 1.1 Melting point determination ISO/TR
Textile quality management. Mr Dale Carroll CSIRO, Textile and Fibre Technology
Textile quality management Mr Dale Carroll CSIRO, Textile and Fibre Technology Textile testing Why do you need to test? What does testing involve? Sampling. Selecting the correct test. Selecting the most
PROTEK PROTECTIVE WORKWEAR PROTECTIVE WORKWEAR PROTECTIVE WORKWEAR PROTECTIVE WORKWEAR PROTECTIVE WORKWEAR
O PR K TE CTIVE E T O R P AR WORK P RKWE WORKWEAR PROTECTIVE W O W E V I E PROTECTIV ROTECT ORKWEAR OTECTIVE W User Manual Merkez İkitelli OSB, Aykosan Sanayi Sitesi 2. Kısım 5. Ada C Blok İkitelli 34490
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 118 Lupton Avenue Leeds LS9 6ED Contact: Mr Scott Wiseman Tel: +44 (0)113 248 8830 Fax: +44 (0)113 248 0239 E-Mail: scott@hstts.co.uk Website:
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15538 First edition 2001-10-01 Protective clothing for firefighters Laboratory test methods and performance requirements for protective clothing with a reflective outer surface
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Cambridge Road Whetstone Leicester LE8 6LH Contact: Ms Michelle Harrison Tel: +44 (0)116 284 6780 Fax: +44 (0)116 284 6781 E-Mail: michelle.harrison@sgs.com Website: www.sgsleicester.com Testing performed
Accreditation No: LAB 043. Pakistan Textile Testing Foundation (PTTF), Faisalabad, Pakistan
Accreditation No: Awarded to Pakistan Textile Testing Foundation (PTTF), Faisalabad, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)
SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SCS/SF/053-8 Issue 1 Sira Certification Service INTRODUCTION One of the conditions placed on all holders of Sira
EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC)
Page 1 of 3 : Notified body number: Certificate No: EC66725-09 Issue 1 12 November 2014 It is certified that the manufacturer s technical file and the PPE detailed below have been assessed and found to
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Units 41 & 43 The Listerhills Park of Science and Commerce Campus Road Bradford BD7 1HR Contact: Ms J Pinkess Tel: +44 (0)1274 303080 Fax:
Centexbel. General certification regulations. Construction products
Centexbel Scientific and Technical centre of the Belgian Textile Industry General certification regulations Construction products 22/03/17 blz. 1 / 8 Contents 1 Introduction 3 2 Object 3 3 Definitions
ARIES. 3,9mín 0,5 ( ph < 4)
DESCRIPTION Safety shoes for professional use. Leather: Split leather Inner neck lining Coolmax Internal lining: Light rock. Removable inner sole Closing: hooks and laces Sole: Bidensity poliurethane +
PRODUCT NUMBER: Tuff Cut Latex
Europe/ME/Africa PRODUCT NUMBER: 2232532 Tuff Cut Latex Handling of heavy parts with high cut risks in humid and slippery environment. Light thermal protection (up to 250 C) View More Reference Number
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK The Warehouse Brewery Lane Leigh Lancashire WN7 2RJ Contact: Mr A J White Tel: +44 (0)1942 265700 Fax: +44 (0)1942 670788 E-Mail: andrew.white@intertek.com
HIGH VI. HTS - EAGOSH Seminar. Seminar 1 EN 471: What is new? Christoph Kuesters, 3M Germany
HTS - EAGOSH Seminar Seminar 1 EN 471: What is new? Christoph Kuesters, 3M Germany Franz-Haniel-Platz, Duisburg September, 29th-30th EN 471: What is new? 1. EN 471 Protection Principles 2. EN 471 Revision
PPE Global Market Access Program
PPE Global Market Access Program About Intertek Group Intertek is a leading provider of quality and safety solutions serving a wide range of industries around the world. From auditing and inspection,
Flame retardant. Protectivewear fabrics by Klopman International
Flame retardant Protectivewear fabrics by Klopman International Innovation in flame retardant protectivewear fabrics A wide range of and cotton rich fabrics with FR treatment Brand segments and performance
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Wira House West Park Ring Road Leeds LS16 6QL Contact: Dr P Hamlyn Tel: +44 (0)161-873 6543 Fax: +44 (0)161-848 7378 E-Mail: info@bttg.co.uk Website: www.bttg.co.uk Testing performed by the comprising
CAT 2: Intermediate Design: d. Puncture Resistance 1 4
HAND PROTECTION HAND PROTECTION Parweld s range of leather and handling gloves offers the user protection against mechanical hazards such as abrasion, cut resistance tear resistance and puncture resistance.
Y S L V i z L i t e 3 0 2
Product Information is intended for use on Flame retardant PPE clothing such as High Visibility Warning clothing and Fire Fighting clothing to enhance visibility in low light and night time conditions
CABLE & HOSE PROTECTION PRODUCT OVERVIEW
CABLE & HOSE PROTECTION PRODUCT OVERVIEW WORKPLACE SAFETY & ASSET PROTECTION MINING MARINE POWER GENERATION TRANSPORT DRILLING & EXPLORATION Superior Safety - Cable & Hose Protection COMPLETE CABLE & HOSE
Technical. Data Sheet. 3M Scotchlite Reflective Material 5535 Segmented Flame Resistant Trim. October Description. Retroreflective Performance
Technical Data Sheet October 2013 3M Scotchlite Reflective Material 5535 Segmented Flame Resistant Trim Description 3M Scotchlite Reflective Material 5535 Segmented Flame Resistant Trim is designed for
PRODUCT NUMBER: FlamePro1 JACKET
Europe / Africa PRODUCT NUMBER: 4111814 FlamePro1 JACKET Overview Reference Number 4111814 Product Type Protective Clothing Range flamepro1 Line Heat and Flame Protection Brand Sperian Industry Industry
Section Specification for Geotextile Used in Permanent Erosion Control Application
Project Name: Project Number: 1 GENERAL Section 02370 Specification for Geotextile Used in Permanent Erosion Control Application 1.1 SECTION INCLUDES A. Geotextile to prevent soil loss resulting in excessive
MATERIAL SPECIFICATION FOR GEOTEXTILES
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1860 NOVEMBER 2004 MATERIAL SPECIFICATION FOR GEOTEXTILES TABLE OF CONTENTS 1860.01 SCOPE 1860.02 REFERENCES 1860.03 DEFINITIONS 1860.04 SUBMISSION
Report VNLF Test Report
Report VNLF 081158.1 Test Report Applicant KLEEN-TEX Industries in Europa GmbH Münchner Straße 21 6330-Kufstein Austria Reference Mrs. Antje Schlegel Application Determination ofthe burning behaviour according
Skyddshandskar för brandmän. Protective gloves for firefighters
SVENSK STANDARD SS-EN 659:2004 Fastställd 2004-10-08 Utgåva 2 Skyddshandskar för brandmän Protective gloves for firefighters ICS 13.340.10; 13.340.40 Språk: engelska Publicerad: november 2004 Copyright
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
Skyddskläder Skydd mot dåligt väder. Protective clothing Protection against rain
SVENSK STANDARD SS-EN 343:2004 Fastställd 2004-01-23 Utgåva 1 Skyddskläder Skydd mot dåligt väder Protective clothing Protection against rain ICS 13.340.10 Språk: engelska Publicerad: mars 2004 Copyright
AASHTO s National Transportation Product Evaluation Program (NTPEP) Evaluation Program for Plants Producing Geotextiles. Pre-Audit Application Form
Please provide the following information and return responses to AASHTO. Provide all applicable supporting documentation requested. Plant Name: Physical Address: Mailing Address: (if different from above)
MATERIAL SPECIFICATION FOR GEOTEXTILES
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS 1860 APRIL 2018 (Formerly OPSS 1860, April 2012) Note: The MUNI implemented in April 2018 replaces OPSS 1860 COMMON, April 2012 with no technical content
11/2016. Protective clothing BUSHFIRE. 3rd category of Personal Protective Clothing
11/2016 Protective clothing BUSHFIRE 3rd category of Personal Protective Clothing 1 Design of product: 2 Used materials and their technical parameters: Art. 1117 NOMEX Comfort RS, 220 g/m2 (93% Nomex,
MARKING EC Directive 97/23 PED (Pressure Equipment Directive)
MARKING EC Directive 97/23 PED (Pressure Equipment Directive) Field of application The Directive applies to the design, manufacturing and conformity assessment of the pressure equipment and of their groups
GASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012
KE 15 January 2012 GASTEC QA Approval Requirements 15 for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas Foreword These GASTEC QA Approval requirements have been
SKAPS GEOTEXTILE SUBSURFACE DRAINAGE
SKAPS INDUSTRIES 335 Athena Drive, Athens, GA 30601 Ph: (706)-354-3700 Fax: (706)-354-3737 Email: contact@skaps.com DROP-IN SPECIFICATIONS SKAPS GEOTEXTILE SUBSURFACE DRAINAGE The following drop-in specification
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
SPECIAL SPECIFICATION 3687 Impermeable Liner
1993 Specifications CSJ s 0569-01-043 & 0945-04-025 SPECIAL SPECIFICATION 3687 Impermeable Liner 1. Description. This Item shall govern for the furnishing and installation of the impermeable liner (geomembrane)
8/2017. Firefighter protective clothing ANACONDA. 3rd category of Personal Protective Clothing
8/2017 Firefighter protective clothing ANACONDA 3rd category of Personal Protective Clothing 1 Clothing image: 2 Clothing image: Description of used materials and their technical parameters: Garment features:
Geosynthetic Institute GSI GRI GT13(b) ISO Version
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 1: December 19, 2012 Revision Schedule on pg. 9 GRI GT13(b) ISO
Monitoring of Penetration System Performance due to ISO by using Test Panels due to ISO
19 th World Conference on Non-Destructive Testing 2016 Monitoring of Penetration System Performance due to ISO 3452-1 by using Test Panels due to ISO 3452-3 Andreas KINZEL 1, Wolfgang KÖNIG 1, Heide KÜHN
DECLARATION OF COMPLIANCE PERFORMANCE AND CE MARK
DECLARATION OF COMPLIANCE PERFORMANCE AND CE MARK Declaration only valid with the purchase invoice for the said product, which indicates the quantity of l./kg acquired, data that will determine approx.
SPIDER P SPIDER P mineral
The leader in the selfadhesive technology! SPIDER P SPIDER P mineral SPIDER P and SPIDER P MINERAL are excellent quality self-adhesive waterproofing membranes made with ADESO technology, the new compound
Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
Valve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
CERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh
CERTIFICATE Conformity of the Factory Production Control 0035-CPR-1090-1.00794.TÜVRh.2017.003 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
Geomembranes that work
Geomembranes that work www.firestonebpe.com Dependable performance in demanding environments Firestone EPDM Geomembrane is a rubber liner offering a flexible and durable solution for a wide variety of
FLAGON PVC FLAGON SV ROOFING SYNTHETIC MEMBRANES
FLAGON PVC FLAGON SV ROOFING SYNTHETIC MEMBRANES 1085 CPD 0010 1085 CPD 0018 FLAGON SV www.flag.it COMPOSITION Synthetic membrane of plasticised PVC with a layer of glass fibre (50 g/m 2 ) inserted for
GASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
Firetuf OFC-UT-CST Fire resistant Armoured Central Tube Cable, variant in red
OFC-UT-CST Fire resistant Armoured Indoor/Outdoor steel tape armoured (CST) double LSHF-FR sheathed optical cable with 2 24 fibres. VDE: A/I-DQ(ZN)H(SR)H 3rd party verification of the fire tests by BUREAU
ORALITE Microprismatic Garment Tapes
Page 1 of 5 This document applies to ORALITE microprismatic tapes (garment trims) for sewing, heat sealing or welding to garments. Products included in this document are: ORALITE GP 100 Series ORALITE
TECHNICAL SHEETS FOR COORDINATION VERTICAL RECOMMENDATION FOR USE SHEETS (RfUs) STATUS ON SEPTEMBER 2011
TECHNICAL SHEETS FOR COORDINATION VERTICAL RECOMMENDATION FOR USE SHEETS (RfUs) STATUS ON SEPTEMBER 2011 Number CNB/P/ (1) Revision (Rev) Reference - Keywords Approval Vertical Group of NBs (2) Approval
See product BS EN :2010
DECLARATION OF PERFORMANCE TLX UV 10 BMTLXUV10CPR 1. Unique identification code of the product-type: TLX UV10 Breather Membrane 2. Type, batch or serial number or any other element allowing identification
PRODUCT NUMBER: FirePro PARKA
United Kingdom PRODUCT NUMBER: 1430024 FirePro PARKA Overview Reference Number 1430024 Product Type Protective Clothing Range firepro Line Fire Protection (EN 469) Brand Sperian Industry Industry Offshore
Soiled garments reflect less radiant heat. Materials saturated with hydrocarbons will absorb not deflect radiant heat from a fire.
CLEANING IS A MUST: Your garment should be washed at least every six months or as soon as it has been soiled or contaminated. The bunker clothing will require more frequent washing depending on how extensively
Skyddskläder Skydd mot dåligt väder
SVENSK STANDARD SS-EN 343:2004+A1:2007 Fastställd 2007-09-03 Utgåva 1 Skyddskläder Skydd mot dåligt väder Protective clothing Garments for protection against rain ICS 13.340.10 Språk: engelska Publicerad:
~~oeti. Report VN71 O Classification Report. Reference
~~oeti Report VN71 O 137840.3 Classification Report Applicant EGETAEPPER NS lndustrivej Nord 25 7400-Herning Denmark Reference Lenette Ormstrup Application Classification of burning behaviour according
INSPECTION REPORT Nr IDD/S-09/922
Page: 1/7 PROJECT: TPI For Sheet Pile BV Client: Manufacturer: Nanjing Grand Steel Piling Co., Ltd. Inspection requested by: Ref: P/o nr: (client to BV) P/o nr: GP09111101 (client to Manufacturer) SUPPLY
CE marking of noise barriers and foundations
CE marking of noise barriers and foundations Date 2 June 2014 Case officer Charlotte Sejr E - mail cslp@vd.dk Phone +45 7244 2340 Document 14/10726-2 Page 1/13 1 Table of Contents CE MARKING OF NOISE BARRIERS...
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 31 Kingsland Grange Woolston Warrington Cheshire WA1 4RW Contact: Miss K L Marrow Tel: +44 (0)1925 854360 Fax: +44 (0)1925 851654 E-Mail:
Council Directive 93/68/EEC of 22 July 1993 amending Directives
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),
SECTION TABLE OF CONTENTS GEOTEXTILE TUBES PARAGRAPH TITLE PAGE NOS.
SECTION TABLE OF CONTENTS SITE WORK GEOTEXTILE TUBES PARAGRAPH TITLE PAGE NOS. PART 1 - GENERAL 1.1 SCOPE OF WORK................................ 1 1.2 REFERENCES.................................. 1 1.3
1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS GOVMARK TESTING SERVICES, INC. 96 Allen Boulevard, Suite D Farmingdale, NY 11735 Doug Lipp Phone: 631 293 8944 THERMAL Valid To: May 31, 2018 Certificate
Fiji Electricity Authority Transmission Unit 2 Marlow Street, Suva
TENDER DOCUMENT AND SPECIFICATION MR 269/2017 Preferred Supplier for Geotextile Fabric The Fiji Electricity Authority (FEA) invites bids from reputable contractors for being the Preferred Supplier of Geotextile
ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS
Revision index Date of implementation B 30/06/2013 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincarré, 75782 Paris Cedex 16 Tel. 33.(0)1.64.68.84.97 Fax. 33.(0)1.64.68.83.45
REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013
SAFETY, STRUCTURES AND FIRE DEPARTMENT Reaction to Fire REACTION TO FIRE CLASSIFICATION REPORT ACCORDING TO THE EUROPEAN STANDARD NF EN 13501-1+A1:2013 Notification by the French Government to the European
EN transition from BS 1387 Structural & Conveyance Business
Corus Tubes EN 10255 transition from BS 1387 Structural & Conveyance Business EN 10255 A smooth transition with Corus Install Contents 1 Introduction 2 The new standard 4 Detailed comparison 7 Comparison
Reaction to fire classification report No C-rev.1
Reaction to fire classification report. 17241C-rev.1 Owner of the classification report Distributor: Vescom bv Churchilllaan 10 Sint Jozefstraat 20 5705 BK Helmond 5750 AB Deurne The Netherlands The Netherlands
REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013
SAFETY, STRUCTURES AND FIRE DEPARTMENT Reaction to Fire REACTION TO FIRE CLASSIFICATION REPORT ACCORDING TO THE EUROPEAN STANDARD NF EN 13501-1+A1:2013 Notification by the French Government to the European
In accordance with the Radio Waves Act Chapter 58 Article 8(3), the document below is a
Korea Communications Commission Notification 2011-37 In accordance with the Radio Waves Act Chapter 58 Article 8(3), the document below is a guideline for all broadcasting and telecommunications equipment
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
G E O T E X T I L E S
G E O T E X T I L E S stronger by design G E O T E X T I L E S no.1 the UK s woven manufacturer Don & Low are market leaders in the manufacture of a wide range of industrial textile products. Our international
DRESS YOUR POOL IN COLOR WITH TEXPOOL TEXPOOL NG 11. Reinforced 1.5 mm waterproofing membrane, for that touch of elegance
DRESS YOUR POOL IN COLOR WITH NG 11 Reinforced 1.5 mm waterproofing membrane, for that touch of elegance RANGE 1 NG 11 UNICOLOR STANDARD: Standard finishing, available in 15 colours 559/CA LIGTH BLUE*
Firefighter protective clothing GEPARD
08/2016 Firefighter protective clothing GEPARD 3rd category of Personal Protective Clothing 1 Clothing image: 2 Clothing image: Description of used materials and their technical parameters: Construction
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31129-2 SOUTH AFRICAN NATIONAL STANDARD Symbolic safety signs Part 1: Standard signs and general requirements WARNING This document references other documents normatively. Published by SABS
EUROPUMP ATEX Guideline Part II
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER EUROPUMP ATEX Guideline Part II Application of the EC-Guidelines
PRODUCT NUMBER: FirePro OVER-PANTS
Europe / Africa PRODUCT NUMBER: 1420031 FirePro OVER-PANTS Overview Reference Number 1420031 Product Type Protective Clothing Range firepro Line Fire Protection (EN 469) Brand Sperian Industry Industry
The Machinery Directive 2006/42/EC
The Machinery Directive 2006/42/EC Aims of the Machinery Directive To ensure the free movement of machinery on the EU market whether manufactured in the EU or imported To ensure a high level of protection
Reaction to fire classification report No C
Reaction to fire classification report. 17911C Owner of the classification report Tapetex B.V. Distributor: Vescom bv Churchilllaan 10 Sint Jozefstraat 20 5705 BK Helmond 5750 AB Deurne The Netherlands
Electrical test. Determining resistance of conductors by means of using DC four-wire connection measurement
Nr. Material or Product Type of activity Internal reference number 1 Cables of rated voltage up to Electrical test Determining resistance of conductors by means of using DC four-wire connection measurement
Section 714. GEOTEXTILE AND GEOCOMPOSITE DRAIN MATERIAL
Section 714. GEOTEXTILE AND GEOCOMPOSITE DRAIN MATERIAL 714.01 Geotextile. Use long-chain, synthetic polymers, composed at least 95 percent by mass of polyolefins or polyesters, to manufacture geotextile
TESTS LIST 2014 YARNS WOVEN NON WOVEN-PADDED WOVEN GARMENTS AND ACCESSORIES COMFORT TESTS CHEMICAL /ECO-TOXICOLOGICAL TESTS LEATHER TESTS
TESTS LIST 2014 YARNS WOVEN NON WOVEN-PADDED WOVEN GARMENTS AND ACCESSORIES COMFORT TESTS CHEMICAL /ECO-TOXICOLOGICAL TESTS LEATHER TESTS ADVICE ON MARKET REGULATIONS STUDIES ON DEFECTIVENESS TECHNICAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60454-2 Third edition 2007-06 Pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test Commission Electrotechnique Internationale International Electrotechnical
Firestone Lining Systems. Dependable Performance in Demanding Environments
Firestone Lining Systems Dependable Performance in Demanding Environments Firestone EPDM Geomembrane Product Line Thickness Standard Widths Standard Lengths Weight Standard panel sizes 1,02 mm (.040 )
1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Impermeable Liner
1993 Specifications CSJ 0128-01-085 SPECIAL SPECIFICATION ITEM 5327 Impermeable Liner 1. Description. This Item shall govern for the furnishing and installation of the impermeable liner (geomembrane) shown
The European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
GASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
8/2016. Protective HOOD. 3rd category of Personal Protective Clothing
8/2016 Protective HOOD 3rd category of Personal Protective Clothing 1 Clothing image: 2 Description of used materials and their technical parameters: Material: Threads: Description: NOMEX Comfort, Art.
ISO INTERNATIONAL STANDARD. Protective gloves for firefighters Laboratory test methods and performance requirements
INTERNATIONAL STANDARD ISO 15383 First edition 2001-09-01 Corrected version 2003-04-15 Protective gloves for firefighters Laboratory test methods and performance requirements Gants de protection pour sapeurs-pompiers
SilverScreen. The innovation in solar heat and light control
SilverScreen The innovation in solar heat and light control Introducing SilverScreen The innovation in solar heat and light control Product description What is it? SilverScreen is based on a common screen
Frequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry
1. Must a construction product bear the CE marking after 30/06/2013? After 30/06/2013, in order to sell a construction product in the European Union (EU) the manufacturer has the obligation to issue a
CAPPING OF A GOLD MINE IN ROSIA MONTANA, ROMANIA
Rosia Montana has always been rich in mineral resources, especially in gold. Unfortunately the accident at Baia Mare in 2000 brought home to Romanians the dangers of cyanide leaching due to the use of
1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
Mandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
BS EN ISO : 2010
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0 1925 655116 F : +44 (0) 1925 655419 E : warrington@exova.com W: www.exova.com Fire Tests For Determination Of The Burning
Delivering the Comfort and Performance Your Customers Demand
Delivering the Comfort and Performance Your Customers Demand Innovative Products Leading the way in textile testing solutions SDL Atlas is the leading supplier of textile testing equipment, laboratory
A NEW FORCE IN PROTECTIVE CLOTHING. Waxman
A NEW FORCE IN PROTECTIVE CLOTHING Waxman The revolutionary new range of protective clothing solutions from Waxman For over a decade Waxman and our partners have successfully introduced and provided our