Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 151/2018 Αρ. 5092, Αριθμός 151 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012

Transcription

1 1126 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 151/2018 Αρ. 5092, Αριθμός 151 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Ι)/2002 θαη ηνπ Άξζξνπ 6 ηνπ Σξνπνπνηεηηθνύ Νόκνπ 57(Ι)/2011 Με ην παξόλ γλσζηνπνηείηαη όηη βάζεη ησλ Άξζξσλ 5 ηνπ βαζηθνύ Νόκνπ 156(Ι) ηνπ 2002 θαη 6 ηνπ ηξνπνπνηεηηθνύ Νόκνπ 57(Ι)/2011 πνπ ξπζκίδνπλ ηηο δξαζηεξηόηεηεο ηεο Σππνπνίεζεο, Γηαπίζηεπζεο θαη Σερληθήο Πιεξνθόξεζεο, ν Κππξηαθόο Οξγαληζκόο Σππνπνίεζεο (CYS) δεκνζηεύεη σο Κππξηαθά πξόηππα ηα πην θάησ Δπξσπατθά πξόηππα: STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 Generalities. Terminology. Standardization. Documentation 12216:2018 ISO 9687:2015 /A1:2018 ISO 41011:2018 Shutters, external blinds, internal blinds - Terminology, glossary and definitions Dentistry - Graphical symbols for dental equipment (ISO 9687:2015/Amd 1:2018) Facility management - Vocabulary (ISO 41011:2017) S/S 12216:2002 S/S : Services. Company organization, management and quality. Administration. Transport. Sociology ISO 41001: : : : : :2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) Quality Management Systems - Requirements for Aviation, Space and Defence Organizations Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations Quality Management Systems - Requirements for Aviation, Space and Defence Distributors Quality Management Systems - Requirements for Aviation Maintenance Organizations Aerospace series - Root cause analysis and problem solving (9S Methodology) S/S 9100:2009= W/D S/S 9101:2015= W/D S/S 9120:2010= W/D S/S 9110:2015= W/D 11 Health care technology ISO 7488:2018 Dentistry - Mixing machines for dental amalgam (ISO 7488:2018) :1996

2 1127 ISO :2018 ISO 28319:2018 ISO :2018 ISO 20608:2018 ISO 6872:2015 /A1:2018 ISO 12870:2018 ISO :2018 ISO :2018 ISO :2018 ISO 14607:2018 Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO :2018) Dentistry - Laser welding and filler materials (ISO 28319:2018) Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO :2018) Dentistry - Powder jet handpieces and powders (ISO 20608:2018) Dentistry - Ceramic materials (ISO 6872:2015/Amd 1:2018) Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016) Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO :2018) Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes (ISO :2018) Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO :2017) Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018) ISO :2005 and AC: :2010 S/S ISO : :2014 S/S ISO :2006 and A1:2014, ISO :2014 S/S ISO :2006 and A1:2014 S/S ISO : : Environment. Health protection. Safety 14594: :2018 ISO : : :2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking Ergonomics of human-system interaction - Part 11: Usability: Definitions and concepts (ISO :2018) Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values S/S 14594:2005 and AC:2005 S/S :2005 S/S ISO :1998 S/S 689:1996

3 1128 ISO : :2018 ISO 11260:2018 ISO 14254:2018 Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO :2018) Determination of burning behaviour of dust layers Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018) Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018) : : Mechanical systems and components for general use : :2018 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies EN :2009 EN : Fluid systems and components for general use :2014 /A2:2018 ISO :2018 ISO :2018 Unfired pressure vessels - Part 2: Materials Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO :2018) Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO :2018) Manufacturing engineering :2018 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons EN : :2011 +A1:2018 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools S/S 15895:2011

4 Electrical engineering ISO/IEC :2016 /A1: :2018 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC :2016) Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems Information technology : : :2018 CYS CEN ISO/TS 19293:2018 CYS CEN ISO/TS 20443:2018 CYS CEN ISO/TS 20451:2018 Protection Profiles for TSP Cryptographic Modules - Part 5: Cryptographic Module for Trust Services Rationalized structure for electronic signature standardization - Best practices for SMEs Rationalized structure for electronic signature standardization - Guidelines for citizens Health Informatics - Requirements for a record of the dispense of a medicinal product (ISO/TS 19293:2018) Health informatics - Identification of medicinal products - Implementation guidelines for ISO data elements and structures for the unique identification and exchange of regulated medicinal product information (ISO/TS 20443:2017) Health informatics - Identification of medicinal products - Implementation guidelines for ISO data elements and structures for the unique identification and exchange of regulated pharmaceutical product information (ISO/TS 20451:2017) Shipbuilding and marine structures ISO 8385:2018 Ships and marine technology - Dredgers - Classification (ISO 8385:2018) : Aircraft and space vehicle engineering 2234: :2018 Aerospace series - Cable, electrical, fire resistant - Technical specification Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: MPa (at ambient temperature) / 650 C S/S 2234:2012 S/S 4122:2004

5 : : : :2018 Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: MPa (at ambient temperature) / 600 C Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60 swage - Classification: MPa (at ambient temperature) / 730 C Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 C to 105 C - Product Standard S/S 4123:2004 S/S 4124: Materials handling equipment : :2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including kg capacity Textile and leather technology ISO 811:2018 ISO :2018 ISO 15496:2018 ISO :2018 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018) Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO :2018) Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2018) Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO :2018) S/S 20811:1992 S/S ISO :2003 and AC: :2004 and AC: Clothing industry ISO 20863:2018 Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018) :2004

6 Agriculture ISO :2018 ISO :2013 /A1:2018 Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO :2018) Garden equipment - Safety requirements for combustion-enginepowered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO :2013/Amd 1:2017) S/S 14017:2005 +A2: Food technology 15662:2018 ISO :2018 ISO :2018 Foods of plant origin - Multimethod for the determination of pesticide residues using GC- and LC-based analysis following acetonitrile extraction/partitioning and clean-up by dispersive SPE - Modular QuEChERS-method Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind (ISO :2018) Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese (ISO :2018) S/S 15662:2008 S/S ISO :2013 S/S ISO : Metallurgy 12861:2018 ISO :2018 ISO :2018 ISO 4490:2018 Copper and copper alloys - Scrap Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO :2018) Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO :2018) Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018) S/S 12861:1999 S/S :1990 and AC:1991 S/S ISO : : Rubber and plastic industries ISO :2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO :2018) S/S ISO :2013

7 :2018 Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films Construction materials and building 81-71: : : : : :2018 Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts Declaration of uncertainties in test reports Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external) Anti-seismic devices EN 81-71:2005 +A1:2006 S/S 81-70:2003 and A1:2004 EN 81-28:2003 S/S 15129: Civil engineering :2018 CYS CEN/TS : :2018 Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression Bituminous mixtures - Test methods - Part 50: Resistance to scuffing Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 1: Acoustic characteristics S/S :2003 CEN/TS :2016

8 Domestic and commercial equipment. Entertainment. Sports : :2018 Child care articles - General safety guidelines - Part 5: Product information Child care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment CEN/TR :2015 CEN/TR :2015 ΔΙΟΡΘΩΕΙ Ε ΠΡΟΗΓΟΤΜΕΝΕ ΕΚΔΟΕΙ ISO 13918:2018 ISO : :2018 ISO : :2018 ISO :2018 ISO :2018 CYS CEN/TS 17148:2018 Title Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version ) Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO :2017, Corrected version ) Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO :2018, Corrected version ) Risk-based inspection framework Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO :2018) Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with curedin-place pipes (ISO :2018) Intelligent Transport Systems - esafety - ProForma ecall Agreement between TPSP and PARES Modifications ISO has published corrected English and French versions of ISO 13918:2017 (Corrected version ). Titles and Forewords have been updated accordingly. ISO has published corrected English version of ISO :2017 (Corrected version ). In A , correct the cross reference in the last paragraph. ISO has published corrected English version of ISO :2018 (Corrected version ). Titles and Forewords have been updated accordingly. In 9.3.2, the reference to "6.2" has been corrected to read "Clause 7". In the Bibliography, reference [60] "IEC 812:2011" has been corrected to read "ISO 812:2017". The title of ISO/TC 138 in the European foreword has been corrected to read "Plastics pipes, fittings and valves for the transport of fluids. The title of ISO/TC 138 in the European foreword has been corrected to read "Plastics pipes, fittings and valves for the transport of fluids. New Release by CEN ΣΡΟΠΟΠΟΙΗΕΙ / CORRIGENDA ISO :2009/AC:2018 ISO :2017/AC:2018 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 2 (ISO :2009/Cor 2:2012) Woodworking machines - Safety - Part 1: Common requirements (ISO :2017) ΑΛΛΕ ΕΚΔΟΕΙ CWA 17260:2018 Guidelines on evaluation systems and schemes for physical security products