VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do

Transcription

1 VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením dow dátum zrušenia: dátum, dokedy musia byť zrušene národne normy, ktoré sú v rozpore s EN Zoznam technických komisii CEN sa nachádza na webovej stránke. Označenie dokumentu Názov v angličtine Dop Dow Technická komisia EN Supersulfated cement - Composition, specifications and conformity CEN/TC 51 criteria EN Methods of testing cement - Part 6: Determination of fineness CEN/TC 51 CEN/TR Thermal insulating products - Factory made products of expanded CEN/TC 88 polystyrene (EPS) - Voluntary certification of the raw material CEN/TS Testing hardened concrete - Part 11: Determination of the chloride CEN/TC 104 resistance of concrete, unidirectional diffusion EN Welding - Basic welded joint details in steel - Part 1: Pressurized CEN/TC 121 components EN ISO 9539 Gas welding equipment - Materials for equipment used in gas welding, CEN/TC 121 cutting and allied processes (ISO 9539:2010) EN Timber structures - Product requirements for prefabricated structural CEN/TC 124 members assembled with punched metal plate fasteners EN Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices CEN/TC 136 EN 838 EN EN Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria CEN/TC CEN/TC CEN/TC 138 Strana 1

2 CEN ISO/TS Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) CEN/TC 140 CEN/TS Cranes - General design - Part 3-5: Limit states and proof of CEN/TC 147 competence of forged hooks EN Cranes - Mobile cranes CEN/TC 147 EN 1459:1998+A2 Safety of industrial trucks - Self-propelled variable reach trucks CEN/TC 150 EN 14957:2006+A1 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements CEN/TC 153 EN 14404:2004+A1 Personal protective equipment - Knee protectors for work in the kneeling CEN/TC 162 position EN Chemicals used for treatment of swimming pool water - Calcium CEN/TC 164 hypochlorite EN Chemicals used for the treatment of swimming pool water - Iron based CEN/TC 164 coagulants EN Products used for the treatment of swimming pool water - Filter media CEN/TC 164 EN EN ISO Products used for treatment of swimming pool water - Powdered activated carbon Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010) CEN/TC CEN/TC 170 EN ISO Tissue paper and tissue products - Part 12: Determination of tensile CEN/TC 172 strength of perforated lines - Calculation of perforation efficiency (ISO :2010) EN Paper and board - Determination of the cytotoxicity of aqueous extracts CEN/TC 172 EN Round and sawn timber - Permitted deviations and preferred sizes - Part CEN/TC 175 1: Softwood sawn timber EN 1315 Dimensional classification of round timber CEN/TC 175 EN Qualification test of welders - Fusion welding - Part 6: Cast iron CEN/TC 190 EN Test of adhesives for floor covering - Determination of the electrical CEN/TC 193 resistance of adhesive films and composites EN :2001+A1 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements CEN/TC 196 Strana 2

3 EN :2001+A1 EN :2006+A1 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems CEN/TC CEN/TC 196 EN High pressure water jet machines - Safety requirements - Part 1: CEN/TC 197 Machines EN Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods CEN/TC 207 EN ISO :2007/A1 Medical gas pipeline systems - Part 1: Pipeline systems for compressed CEN/TC 215 medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses (ISO :2007/Amd 1:2010) EN Precast concrete products - Beam-and-block floor systems - Part 4: CEN/TC 229 Expanded polystyrene blocks EN Water quality - Guidance standard on determining the degree of CEN/TC 230 modification of river hydromorphology EN 14353:2007+A1 Metal beads and feature profiles for use with gypsum plasterboards CEN/TC 241 Definitions, requirements and test methods EN ISO 105-A01 Textiles - Tests for colour fastness - Part A01: General principles of CEN/TC 248 testing (ISO 105-A01:2010) EN :2005/AC Eurocode 1: Actions on structures - Part 1-4: General actions - Wind CEN/TC 250 actions EN Flexible sheets for waterproofing - Reinforced bitumen sheets for CEN/TC 254 waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics EN Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment CEN/TC 256 EN Railway applications - Closing and locking devices for payload protecting CEN/TC 256 devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling CEN/TR Stationary source emissions - Guidance on the application of EN 14181:2004 CEN/TC 264 Strana 3

4 CEN/TS Road transport and traffic telematics - Public transport - Identification of fixed objects in public transport EN LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³ EN ISO Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO :2009) EN Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges CEN/TR Prevention of crime - Urban planning and building design - Part 5: Petrol stations EN ISO 9261 Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004) EN Solid biofuels - Fuel specifications and classes - Part 1: General requirements CEN/TS Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen EN 3228 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 C EN 3435 Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: MPa (at ambient temperature) / 315 C CEN/TC CEN/TC CEN/TC CEN/TC 308 CEN/TC CEN/TC CEN/TC 335 CEN/TC 336 EN 3653 EN 3750 Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 C Aerospace series - Nuts, anchor, self-locking, fixed, 90 corner, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: MPa (at ambient temperature) / 315 C EN 3763 Aerospace series - Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Strana 4

5 EN 3834 EN 4125 EN 4126 EN Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification EN Aerospace series - Lamps, incandescent - Part 003: Lamp, code 44 - Product standard EN Aerospace series - Lamps, incandescent - Part 004: Lamp, code 47 - Product standard EN Aerospace series - Lamps, incandescent - Part 010: Lamp, code 84 - Product standard EN Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes EN Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes EN Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes EN Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes CWA Business Interoperability Interfaces for Public procurement in Europe - Part 0: Introduction CWA Business Interoperability Interfaces for Public procurement in Europe - Part 1: Profile overview Strana 5

6 CWA Business Interoperability Interfaces for Public procurement in Europe - Part 2: Convergence and gap analyses CWA Business Interoperability Interfaces for Public procurement in Europe Part 3: Toolbox Requirements CWA Business Interoperability Interfaces for Public procurement in Europe Part 4: Evaluation guidelines for testing and piloting CWA ECTS Information Package/Course Catalogue MLO Application Profile CWA Educational Credit Information Model CWA Curriculum Exchange Format Strana 6