VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
|
|
|
- Patience Powers
- 5 years ago
- Views:
Transcription
1 VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením dow dátum zrušenia: dátum, do ktorého sa musia zrušiť národné normy, ktoré sú v rozpore s EN Označenie dokumentu Názov v angličtine Dop Dow Technická komisia EN :2017 Artificial climbing structures - Part 1: Safety requirements and test CEN/TC 136 methods for ACS with protection points EN :2017 Railway applications - Design for PRM use - General requirements - Part 2: Information EN :2017 Railway applications - Design for PRM use - General requirements - Part 1: Contrast EN :2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics EN ISO 17409:2017 Electrically propelled road vehicles - Connection to an external CEN/TC 301 electric power supply - Safety requirements (ISO 17409:2015, Corrected version ) EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism EN 16147:2017 Heat pumps with electrically driven compressors - Testing, CEN/TC 113 performance rating and requirements for marking of domestic hot water units EN 14534:2016/AC:2017 Postal services - Quality of service - Measurement of the transit CEN/TC 331 time of end-to-end services for bulk mail EN ISO :2017 Plastics - Sulfone polymer moulding and extrusion materials CEN/TC 249 Part 1: Designation system and basis for specifications (ISO :2009) CEN/TR 17052:2017 Guidelines on implementing EN :2009+A1:2011, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components CEN/TC 135 Strana 1
2 CWA 17102:2017 Water analysis - Virus sensor system - Monitoring rotavirus, CEN/WS 082 norovirus and hepatitis A virus in various types of water intended for human use EN 15551:2017 Railway applications - Railway rolling stock - Buffers EN :2017 Artificial climbing structures - Part 3: Safety requirements and test CEN/TC 136 methods for climbing holds EN 1496:2017 Personal fall protection equipment - Rescue lifting devices CEN/TC 160 EN 14176:2017 Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection CEN/TC 275 EN 13743:2017 Safety requirements for coated abrasive products CEN/TC 143 EN ISO :2017 Geometrical product specifications (GPS) - Filtration - Part 30: CEN/TC 290 Robust profile filters: Basic concepts (ISO :2015) EN 14791:2017 EN :2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits CEN/TC 44 EN 12868:2017 Child use and care articles - Method for determining the release CEN/TC 252 of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers EN 16763:2017 Services for fire safety systems and security systems CEN/CLC/TC 4 EN :2017 Aircraft ground support equipment - Specific requirements - Part CEN/TC 274 3: Conveyor belt vehicles EN 15961:2017 Fertilizers - Extraction of water-soluble calcium, magnesium, CEN/TC 260 sodium and sulfur in the form of sulfates EN 609-1:2017 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters CEN/TC 144 EN :2017 Thermal insulation products of buildings - In-situ formed products CEN/TC 88 from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation Strana 2
3 EN 15058:2017 EN 1839:2017 EN :2017 EN 14793:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry Determination of the explosion limits and the limiting oxygen concentration(loc) for flammable gases and vapours Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 001: Technical specification Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method CEN/TC 305 EN 14986:2017 Design of fans working in potentially explosive atmospheres CEN/TC 305 EN :2017 Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance EN 6129:2016/AC:2017 Aerospace series - Blind bolt, protruding head, high strength, ASD-STAN pulltype EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking CEN/TC 93 EN ISO :2017 Plastics - Sulfone polymer moulding and extrusion materials CEN/TC 249 Part 2: Preparation of test specimens and determination of properties (ISO :2009) EN 490:2011+A1:2017 Concrete roofing tiles and fittings for roof covering and wall CEN/TC 128 cladding - Product specifications EN :2017 Plastics piping systems with structured-wall pipes for soil and CEN/TC 155 waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system EN :2017 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence EN 14790:2017 Stationary source emissions - Determination of the water vapour in ducts - Standard reference method Strana 3
4 EN :2017 CEN/TS 17021:2017 EN 4179:2017 EN 6029:2017 Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques Aerospace series - Qualification and approval of personnel for non-destructive testing Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series CEN/TC 136 CEN/TC 264 EN :2017 Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving EN ISO :2017 Geometrical product specifications (GPS) - Dimensional CEN/TC 290 tolerancing - Part 3: Angular sizes (ISO :2016) EN 4297:2017 Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 C EN ISO 5492:2009/A1:2017 Sensory analysis - Vocabulary - Amendment 1 (ISO CEN/SS C :2008/Amd 1:2016) EN ISO 6553:2017 Automatic steam traps - Marking (ISO 6553:2016) CEN/TC 69 EN :2017 Structural steel equal and unequal leg angles - Part 1: ECISS/TC 103 Dimensions EN :2017 Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors EN 14526:2017 Foodstuffs - Determination of saxitoxin-group toxins in shellfish CEN/TC 275 HPLC method using pre-column derivatization with peroxide or periodate oxidation EN ISO 8033:2017 Rubber and plastics hoses - Determination of adhesion between CEN/TC 218 components (ISO 8033:2016) EN 2879:2017 Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 C Strana 4
5 CEN/TR 17024:2017 Natural stones - Guidance for use of natural stones CEN/TC 246 EN 581-3:2017 Outdoor furniture - Seating and tables for camping, domestic and CEN/TC 207 contract use - Part 3: Mechanical safety requirements for tables EN :2017 EN 10365:2017 EN 4178:2017 EN 15425:2017 EN :2017 EN 4072:2016/AC:2017 EN ISO :2017 CEN/TS 16405:2017 EN :2017 EN 10152:2017 Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets Hot rolled steel channels, I and H sections - Dimensions and masses Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: MPa (at ambient temperature) / 315 C Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 3: General safety and environmental requirements Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: MPa (at ambient temperature) / 425 C Steel cord conveyor belts - Part 2: Preferred belt types (ISO :2017) Intelligent transport systems - Ecall - Additional data concept specification for heavy goods vehicles and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions ECISS/TC 103 ASD-STAN CEN/TC 188 CEN/TC ECISS/TC 109 Strana 5
6 EN ISO :2014/A1:2017 EN 13206:2017 EN :2017 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO :2014/Amd 1:2016) Plastics - Thermoplastic covering films for use in agriculture and horticulture and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions CEN/TC CEN/TC 249 EN ISO 7199:2017 Cardiovascular implants and artificial organs - Blood-gas CEN/TC 205 exchangers (oxygenators) (ISO 7199:2016) EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples CEN/TC 289 (ISO 4044:2017) EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016) CEN/TC 249 EN 13110:2012+A1:2017 LPG equipment and accessories - Transportable refillable welded CEN/TC 286 aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction EN 1909:2017 Safety requirements for cableway installations designed to carry CEN/TC 242 persons - Recovery and evacuation EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam CEN/TC 218 Specification (ISO 6134:2017) EN ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to CEN/TC 211 age and gender (ISO 7029:2017) EN 3908:2017 Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated EN 16851:2017 Cranes - Light crane systems CEN/TC 147 EN 16992:2017 Competency for Customs Representatives CEN/TC 432 EN :2012+A1:2017 Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel EN ISO 25237:2017 Health informatics - Pseudonymization (ISO 25237:2017) CEN/TC 251 Strana 6
7 EN ISO 15493:2003/A1:2017 EN ISO 703:2017 EN :2017 EN :2017 Plastics piping systems for industrial applications - Acrylonitrilebutadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC- U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1: Cor 1:2004) Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017) and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) CEN/TC CEN/TC 188 EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear EN :2017 Thermal solar systems and components - Factory made systems CEN/TC 312 Part 2: Test methods EN :2017 Thermal solar systems and components - Factory made systems CEN/TC 312 Part 1: General requirements EN ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and CEN/TC 136 test methods (ISO 8936:2017) EN :2017 Packaging - Test method to determine the porosity of the internal CEN/TC 261 coating of flexible aluminium tubes - Part 2: Copper sulphate test EN :2012+A1:2017 EN :2017 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test CEN/TC 261 Strana 7
Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009)
Nr. Standard reference Title 1 EN 12572-1:2017 2 EN 16584-2:2017 3 EN 16584-1:2017 4 EN 16584-3:2017 Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2016 do 31. 12. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2018 do 31. 3. 2018 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 1. 2010 do 31. 1. 2010 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2016 do 31. 7. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 2. 2017 do 28. 2. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 8. 2016 do 31. 8. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do CEN/TC 12 on competency for personnel (ISO/TS 17969:2015)
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 6. 2015 do 30. 6. 2015 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 11. 2017 do 30. 11. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 8. 2017 do 31. 8. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 5. 2018 do 31. 5. 2018 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od 1. 6. 2017 do 30. 6. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2011 do 31. 12. 2011 DOP dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2014 do 31. 7. 2014 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od 1. 9. 2013 do 30. 9. 2013 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 4. 2010 do 30. 4. 2010 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do Stránka 1
Dokument Referenčný dokument Názov CLC TC/SC IEC TC/SC dop dow CLC/TR 50555:2010 Interruption indexes CLC TC 8X EN 60068-2-5:2011 IEC 60068-2-5:2010 (EQV) + corrigendum Dec. 2010 (EQV) Environmental testing
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2014 do 31. 3. 2014 Dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 6. 2016 do 30. 6. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2011 do 31. 3. 2011 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements 5 EN 716-2:2017
Nr. Standard reference Title 1 CEN/CLC Guide 35:2017 Modalities for the common sessions of CEN and CENELEC governing bodies and for the common meetings of their advisory groups 2 EN ISO 294-1:2017 Plastics
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2012 do 31. 12. 2012 Dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do CEN/TC 12 (ISO/TS :2014)
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2015 do 31. 12. 2015 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
Nr. Standard reference
Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment
Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings
Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings 2 EN 47:2016 3 EN 204:2016 4 EN 205:2016 5 EN 350:2016 6 EN 384:2016 7 EN ISO 389-7:2005/A1:2016
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
207 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, 12.2.2016 Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηοποίεζε βάζεη ηοσ Άρζροσ 5 ηοσ Βαζηθού Νόκοσ 156(Ι)/2002
Nr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017
Nr. Standard reference Title 1 CEN Guide 16:2017 Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017 The concept of Partnership with European Organisations
1 EN : EN : EN 71-7:2014+A1: EN 302-2: EN 302-3: EN 303-1: EN : EN ISO :2017
Nr. Standard reference Title 1 EN 419212-1:2017 2 EN 419212-3:2017 3 EN 71-7:2014+A1:2017 4 EN 302-2:2017 5 EN 302-3:2017 6 EN 303-1:2017 7 EN 1459-1:2017 8 EN ISO 1833-4:2017 9 EN ISO 1833-7:2017 10 EN
ISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology
Nr. Standard reference Title
Nr. Standard reference Title 1 CEN/TR 419040:2018 Rationalized structure for electronic signature standardization - Guidelines for citizens 2 CEN/TR 419030:2018 Rationalized structure for electronic signature
26: Carbon monoxide detectors - Point detectors. 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
Standard reference EN 54-12:2015 EN 54-26:2015 EN 54-29:2015 English title Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam Fire detection and fire
Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners 4 EN 565:2017
Nr. Standard reference English title 1 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements 2 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use 3 EN 303-2:2017
IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON
IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON 15 JUNE 2007 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. I.S. EN 54-4:1997/A2:2007 Fire detection and fire alarm systems - Part 4: Power supply equipment I.S.
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam 2 EN 54-26:2015
Nr. Standard reference English title 1 EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam 2 EN 54-26:2015 Fire detection and fire alarm
EXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
G Calculation of perforation efficiency ISO/TR 24498: 2006 Paper, board and pulps Estimation of uncertainty for test methods C
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) 3 EN ISO 287:2017
Nr. Standard reference Title 1 EN 419212-2:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services 2 EN ISO
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION. Title ICS1 Withdrawn
418 70 70/2016 I 2012 5 (CYS) STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION 736-2:2016 572-1:2012 Valves - Terminology - Part
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
ISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR 29181-5:2014 - Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR 29181-2:2014
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, Απιθμόρ 202 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, 12.6.2015 Απιθμόρ 202 1430 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηνπνίεζε βάζεη ηνπ άξζξνπ 5 ηνπ βαζηθνύ Νόκνπ 156(Η)
ISO 9152 INTERNATIONAL STANDARD. Aerospace Bolts, with MJ threads, in titanium alloys, strength class MPa Procurement specification
INTERNATIONAL STANDARD ISO 9152 First edition 1998-11-01 Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification Aéronautique et espace Vis à filetage MJ,
IMO. Resolution A.951(23) Adopted on 5 December 2003 (Agenda item 17) IMPROVED GUIDELINES FOR MARINE PORTABLE FIRE EXTINGUISHERS
INTERNATIONAL MARITIME ORGANIZATION E IMO ASSEMBLY 23rd session Agenda item 17 A 23/Res.951 25 February 2004 Original: ENGLISH Resolution A.951(23) Adopted on 5 December 2003 (Agenda item 17) IMPROVED
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
F4060 RESILIENT SEATED GATE VALVES
F4060 RESILIENT SEATED GATE VALVES BS 5163 AS 2638 EN 1074 FM UL EN 1171 ISO 7259 The Keystone Figure 4060 series is a Tyco manufactured resilient seated gate valve available in a wide variety of configurations
Annex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
ISO PROJETOS EM VOTAÇÂO
ISO PROJETOS EM VOTAÇÂO ISO/IEC JTC 1 - Information Technology ATÉ 04 DE MARÇO DE 2015. ISO/IEC DIS 29341-12-1 (Ed 2) - Information technology - UPnP Device Architecture - Part 12-1: Remote User Interface
I-VICFLEX.AB4. Victaulic VicFlex Style AB4 Sprinkler Fitting for Hat Furring Channel Ceiling Systems WARNING INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS I-VICFLEX.AB Victaulic VicFlex Style AB Sprinkler Fitting for Hat Furring Channel Ceiling Systems Read and understand all instructions before attempting to install any Victaulic
Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method 3 EN 280:2013+A1:2015
Nr. Standard reference Title 1 EN 49-2:2015 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application
GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES
ATS-UP03 GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES Reviewed by: Natalija Jovičić Zarić MSc, Quality Manager (QM) Approved by: Dejan Krnjaić PhD, Director Issue/Revision:
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 369/2017 Απ. 5047, Απιθμόρ 369 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΧ 2012
2799 Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 369/2017 Απ. 5047, 10.11.2017 Απιθμόρ 369 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΧ 2012 Γκςζημπμίδζδ αάζεζ ημο Άνενμο 5 ημο Βαζζημφ Νυιμο 156(Ι)/2002
VACUUM & PRESSURE PRODUCTS. Plastics Industry
VACUUM & PRESSURE PRODUCTS Plastics Industry Conveying & Drying Pellet Conveying Pellets are conveyed through extensive pipe networks Conveyed under vacuum (dense phase) or pressure (dilute phase) G-Series
Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them
Ref. Ares(2018)234778-15/01/2018 MetSta Hanna Järvenpää Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them 12.10.2017 Executive
SECTION DUCTWORK. A. Section Painting: Weld priming, weather resistant, paint or coating.
SECTION 15890 DUCTWORK PART 1 - GENERAL 1.1 SECTION INCLUDES A. Metal ductwork. B. Duct cleaning. 1.2 RELATED SECTIONS A. Section 09900 - Painting: Weld priming, weather resistant, paint or coating. B.
This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
EN ISO 16278:2016 Health informatics. Categorial structure for terminological systems of human anatomy (ISO 16278:2016)
Tässä luettelossa mainitaan CENin uudet julkaisut ajalta 1.1 31.3.2016 01.020 Terminology (principles and coordination) EN ISO 16278:2016 Health informatics. Categorial structure for terminological systems
BEIER MACHINERY SRL-Z MIXING UNIT BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO.
BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO., LTD FT1705172 SRL-Z800/ 2000L Mixing Unit Instruction Book Page 1 of 11 Preface Thank you for using our product,
SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS
SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from
Generation, Assessment
Practical Guide to Smoke and Combustion Products from Burning Polymers - Generation, Assessment and Control Sergei Levchik Marcelo Hirschler Edward Weil Smithers ismithers /Smithers - A Smithers Group
BSOL Modules EC Directives
BSOL Modules EC Directives Module Title 90-396-EEC 94-9-EC 00-9-EC 89-106-EEC 89-339-EEC 93-15-EEC 95-16-EC 73-23-EEC Appliance Burning Equipment & Protective Cableway Installations Construction Electromagnetic
SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 3820:2006 Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa
Ceiling Systems 6 Intex Price Guide
6 Intex Price Guide PRODUCT CODE DESCRIPTION LENGTH PACK SIZE PRICE PER PRICE PER STOCK PRICE PER PRICE PER (MM) METRE LENGTH PACK METRE LENGTH P R I M A R Y C H A N N E L S Used as a primary suspension
STS Directory Accreditation number: STS 0030
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:
A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.
SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Installation, Operation and Maintenance Instructions for ThermaFlex Gasketed Plate Heat Exchangers
OM010 Installation, Operation and Maintenance Instructions for ThermaFlex Gasketed Plate Heat Exchangers The operating and maintenance instructions contained within this package are for ThermaFlex gasketed
Nomenclature. 1.4 Sand equivalent dimensions measurement, weight measurement STN EN PP-001 X
Scope of the accreditation Name of the accredited body: Building testing and research institute, n. o. Studená 3, 821 04 Bratislava, Slovakia Testing laboratory ID Number: 31 821 987 Testing workplace
Official Journal of the European Union C 97/11
16.4.2010 Official Journal of the European Union C 97/11 Commission communication in the framework of the implementation of the Council Directive 96/48/EC of 23 July 1996 on the interoperability of the
SECTION PLUMBING EQUIPMENT
PART 1 GENERAL 1.1 SECTION INCLUDES A. Water heaters B. Packaged water heating systems C. Water storage tanks D. Water softeners E. Pumps F. Circulators 1.2 REFERENCES SECTION 22 30 00 PLUMBING EQUIPMENT
Installation, Operation and Maintenance Instructions ThermaFlex Gasketed Plate Heat Exchanger OM010
Installation, Operation and Maintenance Instructions ThermaFlex Gasketed Plate Heat Exchanger OM010 Calorifiers Heat Exchangers Pressurisation Units Sales Tel: 01457 835700 Sales Fax: 01457 832700 E-mail:
Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
RIVERA P5000. Folding awning P5000
RIVERA Beschreibung Description min. 200 cm max. 500 cm 8 25 Wall mounting 8 25 Top fixation min. 200 cm max. 700 cm Terrace roof system comprising an aluminium extruded structure and integrated fabric
CEN System - Delegated Decisions Dispatch 34:2017
2017-08-21 Page 1 CEN System - Delegated Decisions Dispatch 34:2017 1 CEN/TC 19... 1 2 CEN/TC 54... 3 3 CEN/TC 88... 4 4 CEN/TC 112... 5 5 CEN/TC 147... 6 6 CEN/TC 169... 8 7 CEN/TC 191... 9 8 CEN/TC 193...
SECTION GYPSUM PLASTER
SECTION 09210 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation for support of gypsum plaster used as a finish for partitions and ceilings
Volume 10 Summer Understanding Terminology Key to Treatment Program Success
Volume 10 Summer 2003 Understanding Terminology Key to Treatment Program Success One of the keys to success of a boiler water treatment program is good communication between the water treatment professional
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
Vacuum and Compressor Systems for the Chemical Process Industry
Vacuum and Compressor Systems for the Chemical Process Industry Proven technology built from experience Gardner Denver Nash has been serving process industries such as petroleum, chemical and pharmaceutical
MCF 500 CENTRIFUGAL FAN FOR AIR, FOR BIOGAS, LANDFILL AND NATURAL GAS
MCF 00 CENTRIFUGAL FAN FOR AIR, FOR BIOGAS, LANDFILL AND NATURAL GAS MCF 00 CENTRIFUGAL FAN FOR COMBUSTIBLE GASES MCF 00 centrifugal fan for biogas, natural gas or combustible gases, in conformity to the
EN ISO 7010:2012/A5:2015 Graphical symbols. Safety colours and safety signs. Registered safety signs. Amendment 5 (ISO 7010:2011/Amd 5:2014)
Uusimmat CENin julkaisut Tässä luettelossa mainitaan uusimmat CEN-julkaisut ajalta 1.1.2015 31.3.2015. 01.040.49 Aircraft and space vehicle engineering (Vocabularies) EN 16601-00-01:2015 Space systems.
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
839 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, 11.5.2018 Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Η)/2002
Proposed standards for Chinese national adoption
Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
The wait is over. BS 9999:2017 is here.
February 2017 bsigroup.com The wait is over. BS 9999:2017 is here. Contents 4 Quick Reference Guide 10 New and revised British Standards 10 BS EN publications 19 British Standard implementations 23 Published
LIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME. Recommended Practices on Oil Storage and Handling OISD-STD-109
LIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME 1. OISD-STD-105 Work Permit System 2. OISD-STD-106 Pressure Relief & Disposal System 3. OISD-RP-108 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
High quality compressed air from generation to application
01 02 Introduction High quality compressed air from generation to application aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing &
Standard Name Standard number Adopted standard
5 September 2014 SII-IMQ Agreement Categories and Standards List Audio/video equipment (TRON) Office & Data equipment (OFF) Medical equipment (MED) Measurement equipment (MEAS) Household and similar equipment
Standard Specification for Hardened Steel Washers [Metric] 1
![Standard Specification for Hardened Steel Washers [Metric] 1](/thumbs/77/74974858.jpg "Standard Specification for Hardened Steel Washers [Metric] 1")
Designation: F 436M 93 (Reapproved 2000) METRIC Standard Specification for Hardened Steel Washers [Metric] 1 This standard is issued under the fixed designation F 436M; the number immediately following
Dry Ice Blasting Frequently Asked Questions
Dry Ice Blasting Frequently Asked Questions 1. What is CO2 blasting? 2. How does it remove contaminants? 3. How does this differ from how sandblasting works? 4. What happens to the dry ice once it strikes
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bucknalls Lane Garston Watford Hertfordshire WD25 9BA Contact: Alvaro Enquita-Gonzalez Tel: +44 (0)1923-665350 Fax: +44 (0)1923-665452 E-Mail:
Standard Specification for Hardened Steel Washers [Metric] 1
![Standard Specification for Hardened Steel Washers [Metric] 1](/thumbs/84/89510336.jpg "Standard Specification for Hardened Steel Washers [Metric] 1")
Designation: F 436M 03 METRIC Standard Specification for Hardened Steel Washers [Metric] 1 This standard is issued under the fixed designation F 436M; the number immediately following the designation indicates
INSTALLATION INSTRUCTIONS
,1,_2008 Lennox Industries Inc, Dallas, Texas, USA INSTALLATION INSTRUCTIONS CR33 Series Coils EVAPORATOR COILS _ Technical 505,056M LL.L[ Publications 04108 Litho U.S.A. Supersedes 05/05 CR33 Series Coils...
Standards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 506 (2011) (2017-08-04) Timber preservative - Alkaline-copper-quaternary type Covers two types of alkaline-copper-quaternary (ACQ) type timber preservatives and gives minimum and maximum values of
PIPE MANUFACTURING CO.
PIPE MANUFACTURING CO. PRE- INSULATED BONDEND PIPES and FITTINGS from -200 C to +315 C; District Heating and Cooling Systems Cogeneration Systems Transport of Steam Systems (aboveground and underground)
Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous
IAS Accreditation Number Company Name Address TL-657 Room 209, No. 46, Nanxiang 3 rd Road Science City Development Zone Guangzhou 510663 People s Republic of China Javen Xuan, Quality Manager Contact Name
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 7. 2015 do 31. 7. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/A CISPR 16-1-1:2015 PRV 2015-07-10 Specification for radio disturbance
Tubular Heaters Series
Tubular Heaters Series Immersion Heaters, Tubular Heaters, Ribbed Tubular Heaters Screw-in Immersion Heater Standard sizes for application in water Power (W) 2000 000 4500 6000 7500 Input Voltage (V) 20
C 319/6 Official Journal of the European Union
C 319/6 Official Journal of the European Union 5.11.2013 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March