VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
|
|
|
- Emily Austin
- 5 years ago
- Views:
Transcription
1 VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením dow dátum zrušenia: dátum, do ktorého sa musia zrušiť národné normy, ktoré sú v rozpore s EN Označenie dokumentu Názov v angličtine Dop Dow Technická komisia EN 54-5:2017 Fire detection and fire alarm systems - Part 5: Heat detectors CEN/TC 72 Point heat detectors EN ISO :2013/A1:2017 Garden equipment - Safety requirements for combustion-enginepowered CEN/TC 144 lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO :2013/Amd 1:2017) EN :2017 Stationary waste containers - Part 1: Containers with a capacity up to l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design CEN/TC 183 EN 16573:2017 Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumps CEN/TC 156 EN :2017 Stationary waste containers - Part 3: Safety and health requirements EN :2017 Stationary waste containers - Part 2: Performance requirements and test methods EN 16908:2017 Cement and building lime - Environmental product declarations - Product category rules complementary to EN EN ISO :2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO :2017) EN ISO :2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO :2017) CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC 139 Strana 1
2 EN ISO :2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO :2017) EN 13807:2017 Transportable gas cylinders - Battery vehicles and multipleelement gas containers (MEGCs) - Design, manufacture, identification and testing EN 868-6:2017 Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing CEN/TC CEN/TC CEN/TC CEN/TC 104 EN ISO :2017 Textiles - Methods for determination of certain aromatic amines CEN/TC 248 derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO :2017) CEN/TS :2017 Plastics rainwater piping systems for above ground external use - CEN/TC 155 Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity EN ISO :2017 Preparation of steel substrates before application of paints and CEN/TC 139 related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO :2017) EN ISO :2017 Preparation of steel substrates before application of paints and CEN/TC 139 related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO :2017) EN ISO :2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO :2017) CEN/TC 155 EN ISO :2012/A1:2017 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO :2012/Amd 1:2017) CEN/TC 23 EN ISO :2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO :2017) CEN/TC 290 Strana 2
3 EN 868-3:2017 Packaging for terminally sterilized medical devices - Part 3: CEN/TC 102 Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods EN :2017 Gullies for buildings - Part 5: Gullies with light liquids closure CEN/TC 165 EN ISO :2017 Plastics piping systems for hot and cold water installations CEN/TC 155 Polybutene (PB) - Part 1: General (ISO :2017) EN ISO :2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO :2017) CEN/TC 139 EN ISO :2017 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres (ISO :2017) EN 868-7:2017 Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods EN ISO :2017 Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO :2017) EN ISO :2017 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO :2017) EN 868-2:2017 Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods EN 868-4:2017 Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods EN ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS (ISO 18465:2017) CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC 275 EN :2017 Space product assurance - Product assurance management CEN/CLC/TC 5 EN ISO 14532:2017 Natural gas - Vocabulary (ISO 14532:2014) CEN/TC 238 Strana 3
4 EN ISO 8534:2017 EN 16716:2017 CEN/TR 17068:2017 EN ISO 9013:2017 EN ISO 663:2017 EN ISO 3960:2017 EN ISO :2017 EN ISO 29664:2017 EN 14891:2017 EN :2017 EN ISO 6883:2017 EN 16859:2017 EN ISO/ASTM 52900:2017 EN ISO :2017 Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO 8534:2017) Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP) Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2017) Animal and vegetable fats and oils - Determination of peroxide value - Iodometric (visual) endpoint determination (ISO 3960:2017) Health informatics - Personal health device communication - Part 10441: Device specialization - Cardiovascular fitness and activity monitor (ISO/IEEE :2015) Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking pedestrian walkways - Part 1: Sealants for facade elements Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017) Water quality - Guidance standard on monitoring freshwater pearl mussel (Margaritifera margaritifera) populations and their environment Additive manufacturing - General principles - Terminology (ISO/ASTM 52900:2015) Health informatics - Personal health device communication - Part 10442: Device specialization - Strength fitness equipment (ISO/IEEE :2015) CEN/TC CEN/TC 136 CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC CEN/TC 251 Strana 4
5 EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) EN ISO :2017 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO :2015) EN :2017 Glass in Building - Basic alumino silicate glass products - Part 2: Product standard EN :2017 pedestrian walkways - Part 3: Sealants for sanitary joints CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) EN 16870:2017 Water quality - Guidance standard on determining the degree of modification of lake hydromorphology EN ISO/ASTM 52915:2017 Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM 52915:2016) EN 558:2017 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves CEN/TR 17055:2017 Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN and EN Choice of procedures EN ISO :2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO :2013) EN ISO 2418:2017 Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017) CEN/TR 17040:2017 Fertilizers and liming materials - Sampling of static heaps - Technical report on experimental sampling trials performed under mandate M/454 EN :2017 pedestrian walkways - Part 4: Sealants for pedestrian walkways CEN/TC CEN/TC CEN/TC CEN/TC 349 CEN/TC CEN/TC CEN/TC CEN/TC 69 CEN/TC CEN/TC 69 CEN/TC CEN/TC 349 EN 4827:2017 Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys ASD-STAN Strana 5
6 EN :2017 Adhesives for ceramic tiles - Part 1: Requirements, assessment CEN/TC 67 and verification of constancy of performance, classification and marking EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO CEN/TC :2017) EN ISO :2017 Leather - Chemical determination of chromium(vi) content in leather - Part 1: Colorimetric method (ISO :2017) EN ISO 17232:2017 Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2017) EN ISO 17233:2017 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2017) EN 54-13:2017 Fire detection and fire alarm systems - Part 13: Compatibility and CEN/TC 72 connectability assessment of system components EN :2017 Adhesives for ceramic tiles - Part 2: Test methods CEN/TC 67 EN ISO :2017 Health informatics - Personal health device communication - Part CEN/TC : Overview (ISO/IEEE :2015) EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical CEN/TC 290 tolerancing - Profile tolerancing (ISO 1660:2017) EN : CEN/TC 349 pedestrian walkways - Part 2: Sealants for glazing EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017) EN ISO :2017 Leather - Determination of flex resistance - Part 1: Flexometer method (ISO :2017) EN ISO 8401:2017 Metallic coatings - Review of methods of measurement of ductility CEN/TC 262 (ISO 8401:2017) EN ISO 15774:2017 Animal and vegetable fats and oils - Determination of cadmium CEN/TC 307 content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2017) EN ISO 20519:2017 Ships and marine technology - Specification for bunkering of CEN/TC 282 liquefied natural gas fuelled vessels (ISO 20519:2017) EN ISO/IEC 27001:2017 Information technology - Security techniques - Information CEN/SS F12 security management systems - Requirements (ISO/IEC 27001:2013 including Cor 1:2014 and Cor 2:2015) EN ISO 23910:2017 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2017) Strana 6
7 EN ISO 4885:2017 EN ISO/IEC 27000:2017 EN :2017 EN 9132:2017 EN ISO :2017 EN ISO :2017 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017) Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO :2017) Leather - Chemical determination of chromium(vi) content in leather - Part 2: Chromatographic method (ISO :2017) ECISS/TC CEN/SS F CEN/TC ASD-STAN CEN/TC 268 EN ISO :2017 Transfusion equipment for medical use - Part 3: Blood-taking CEN/TC 205 sets for single use (ISO :2016) EN 2590:2017 Aerospace series - Steel - Sheets and plates, hot rolled ASD-STAN Dimensions EN :2017 Bituminous mixtures - Test methods - Part 17: Particle loss of CEN/TC 227 porous asphalt specimens EN :2017 Coil coated metals - Test methods - Part 1: Film thickness CEN/TC 139 EN 13592:2017 Plastics sacks for household waste collection - Types, CEN/TC 261 requirements and test methods EN 16320:2013+A1:2017 Fertilizers and liming materials - Determination of mercury by CEN/TC 260 vapour generation (VG) after aqua regia dissolution EN ISO 21298:2017 Health informatics - Functional and structural roles (ISO CEN/TC :2017) EN ISO :2017 Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO :2017) ECISS/TC 106 EN ISO/IEC 27002:2017 Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013 including Cor 1:2014 and Cor 2:2015) EN 2589:2017 Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm a 3 mm - Dimensions CEN/SS F ASD-STAN Strana 7
8 EN 16640:2017 Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method CEN/TC 411 EN :2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison CEN/TR 17039:2017 Railway applications - Technical Report about the revision of EN EN 16317:2013+A1:2017 Fertilizers and liming materials - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP- AES) after aqua regia dissolution EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools EN :2016/AC: Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications CEN/TC 139 CEN/TC CEN/TC CEN/TC 402 CEN/CLC/TC 3 Strana 8
Nr. Standard reference
Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2018 do 31. 3. 2018 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2016 do 31. 7. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2016 do 31. 12. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 8. 2016 do 31. 8. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do CEN/TC 12 on competency for personnel (ISO/TS 17969:2015)
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 6. 2015 do 30. 6. 2015 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 1. 2017 do 31. 1. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 11. 2017 do 30. 11. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 1. 2010 do 31. 1. 2010 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od 1. 9. 2013 do 30. 9. 2013 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od 1. 6. 2017 do 30. 6. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 6. 2016 do 30. 6. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 5. 2018 do 31. 5. 2018 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Strana 1
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 8. 2017 do 31. 8. 2017 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2014 do 31. 7. 2014 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2011 do 31. 12. 2011 DOP dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do Stránka 1
Dokument Referenčný dokument Názov CLC TC/SC IEC TC/SC dop dow CLC/TR 50555:2010 Interruption indexes CLC TC 8X EN 60068-2-5:2011 IEC 60068-2-5:2010 (EQV) + corrigendum Dec. 2010 (EQV) Environmental testing
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2014 do 31. 3. 2014 Dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 4. 2010 do 30. 4. 2010 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2011 do 31. 3. 2011 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do CEN/TC 12 (ISO/TS :2014)
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2015 do 31. 12. 2015 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 12. 2012 do 31. 12. 2012 Dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením
Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings
Nr. Standard reference Title 1 CEN/CLC Guide 34:2016 CEN and CENELEC representation in official meetings 2 EN 47:2016 3 EN 204:2016 4 EN 205:2016 5 EN 350:2016 6 EN 384:2016 7 EN ISO 389-7:2005/A1:2016
G Calculation of perforation efficiency ISO/TR 24498: 2006 Paper, board and pulps Estimation of uncertainty for test methods C
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017
Nr. Standard reference Title 1 CEN Guide 16:2017 Guide for addressing chemicals in standards for consumer-relevant products 2 CEN/CLC Guide 25:2017 The concept of Partnership with European Organisations
Nr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 3. 2015 do 31.3. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/F CISPR 15:2013+AMD1:2015 CSV 2015-03-27 Limits and methods of measurement
1 EN : EN : EN 71-7:2014+A1: EN 302-2: EN 302-3: EN 303-1: EN : EN ISO :2017
Nr. Standard reference Title 1 EN 419212-1:2017 2 EN 419212-3:2017 3 EN 71-7:2014+A1:2017 4 EN 302-2:2017 5 EN 302-3:2017 6 EN 303-1:2017 7 EN 1459-1:2017 8 EN ISO 1833-4:2017 9 EN ISO 1833-7:2017 10 EN
Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2009)
Nr. Standard reference Title 1 EN 12572-1:2017 2 EN 16584-2:2017 3 EN 16584-1:2017 4 EN 16584-3:2017 Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection
Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam 2 EN 54-26:2015
Nr. Standard reference English title 1 EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam 2 EN 54-26:2015 Fire detection and fire alarm
26: Carbon monoxide detectors - Point detectors. 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
Standard reference EN 54-12:2015 EN 54-26:2015 EN 54-29:2015 English title Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam Fire detection and fire
Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners 4 EN 565:2017
Nr. Standard reference English title 1 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements 2 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use 3 EN 303-2:2017
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
ISO NORMAS PUBLICADAS. ISO/IEC : Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General
ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC 20008-1:2013 - Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General ISO/IEC 14496-3:2009/Amd 4:2013
IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON
IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON 15 JUNE 2007 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. I.S. EN 54-4:1997/A2:2007 Fire detection and fire alarm systems - Part 4: Power supply equipment I.S.
Nr. Standard reference Title
Nr. Standard reference Title 1 CEN/TR 419040:2018 Rationalized structure for electronic signature standardization - Guidelines for citizens 2 CEN/TR 419030:2018 Rationalized structure for electronic signature
Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements 5 EN 716-2:2017
Nr. Standard reference Title 1 CEN/CLC Guide 35:2017 Modalities for the common sessions of CEN and CENELEC governing bodies and for the common meetings of their advisory groups 2 EN ISO 294-1:2017 Plastics
EXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION. Title ICS1 Withdrawn
418 70 70/2016 I 2012 5 (CYS) STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION 736-2:2016 572-1:2012 Valves - Terminology - Part
Window and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation
Window and Door Standards for Performance and Security Russell Day Senior Technical Officer Glass and Glazing Federation The Standards BS EN 14351-1:2006+A2:2016 Windows and doors. Product standard, performance
Mauritian Standards/Amendments Published in 2013
Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013
ISO NORMAS PUBLICADAS. ISO/IEC 19845: Information technology - Universal Business Language
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 19845:2015 - Information technology - Universal Business Language ISO/IEC 23001-12:2015 - Information technology - MPEG systems technologies
Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) 3 EN ISO 287:2017
Nr. Standard reference Title 1 EN 419212-2:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services 2 EN ISO
ISO NORMAS PUBLICADAS. ISO/IEC 10646: Information technology - Universal Coded Character Set (UCS).
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 10646:2014 - Information technology - Universal Coded Character Set (UCS). ISO/IEC 24771:2014 - Information technology - Telecommunications
BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO ISO/JTC 1 - Information technology ISO/IEC 9075-1:2016 - Information technology -- Database languages -- SQL -- Part 1: Framework (SQL/Framework) ISO/IEC 9075-2:2016
Standardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
207 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, 12.2.2016 Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηοποίεζε βάζεη ηοσ Άρζροσ 5 ηοσ Βαζηθού Νόκοσ 156(Ι)/2002
Safety of toys - Part 5: Chemical toys (sets) other than experimental sets 2 CEN/TS 115-4:2015
Nr. Standard reference English title 1 EN 71-5:2015 Safety of toys - Part 5: Chemical toys (sets) other than experimental sets 2 CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 7. 2015 do 31. 7. 2015 IEC TC/SC Dokument Dátum vydania Názov CIS/A CISPR 16-1-1:2015 PRV 2015-07-10 Specification for radio disturbance
Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
839 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, 11.5.2018 Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Η)/2002
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 5. 2015 do 31. 5. 2015 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AE:2013/AMD1:2015 2015-05-01 Amendment
Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them
Ref. Ares(2018)234778-15/01/2018 MetSta Hanna Järvenpää Examination of CPR based harmonised product standards with a view of identifying the classes and threshold levels included in them 12.10.2017 Executive
ISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR 29181-5:2014 - Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR 29181-2:2014
IEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary
Standards - Consolidated with amendments The dates in brackets following the document number are the year of publication and the approval date.
SANS 110 (SABS 110) (2017) (2017-11-17) Sealing compounds for the building industry, two-component, polysulphide base Covers two types of elastomeric two-component polysulphide base joint sealing compounds
IEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 118 Lupton Avenue Leeds LS9 6ED Contact: Mr Scott Wiseman Tel: +44 (0)113 248 8830 Fax: +44 (0)113 248 0239 E-Mail: scott@hstts.co.uk Website:
GFT-060/40/H2. Designed and built According AD-2000 regulation Homologation and branded CE According to the European Directive CE
Item 1) TWO THERMAL OIL HEATERS OF 1200 kw EACH 1.1) THERMAL OIL HEATER BODY Brand PIROBLOC Model GFT-060/40/H2 Power 1200 kw Delta Temperature 40 ºC Execution Horizontal Designed and built According AD-2000
BTHA List of Safety Standards that may be applicable to Toys
BTHA List of Safety Standards that may be applicable to Toys BS / EN / ISO / CEN Standard Number Description Updated 08/07/2017 Toy Safety BS EN 62115:2005 + A11: 2012 Safety of Toys. Electrical Toys -
Vydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 7. 2016 do 31. 7. 2016 IEC TC/SC Dokument Dátum vydania Názov IEC CA 01:2016 2016-07-12 IEC Conformity Assessment Systems - Basic Rules -
ISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
VACUUM VALVES AND HOSES
VACUUM VALVES AND HOSES 5046 Vacuum Valve Two-piece 500 F (260 C) industry standard 5255 Vacuum Valve Three-piece 500 F (260 C) industry standard SS5700 Stainless Steel Vacuum Valve Three-piece 1000 F
ISO NORMAS PUBLICADAS. ISO/IEC : Information technology - Home network resource management - Part 3: Management application.
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 30100-3:2016 - Information technology - Home network resource management - Part 3: Management application. ISO/IEC 30100-2:2016 - Information
CENin uudet julkaisut
CENin uudet julkaisut 1.1. 31.3.2018 01.040.03 Services. Company organization, management and quality. Administration. Transport. Sociology (Vocabularies) EN ISO 22300:2018 Security and resilience. Vocabulary
EN ISO 16278:2016 Health informatics. Categorial structure for terminological systems of human anatomy (ISO 16278:2016)
Tässä luettelossa mainitaan CENin uudet julkaisut ajalta 1.1 31.3.2016 01.020 Terminology (principles and coordination) EN ISO 16278:2016 Health informatics. Categorial structure for terminological systems
Standards for nanotechnologies
Standards for nanotechnologies Dr Peter Hatto, Chairman ISO TC 229, CEN TC 352 and BSI NTI/1 Nanotechnologies standardization committees Director of Research, IonBond Ltd Standards and standardization
Reference F-IAB-012 Page Page 1 of 6 Revision 2. Please complete all sections and submit electronically to
Agrément Form Title WINDOW ENERGY PERFORMANCE (WEP) APPLICATION FORM Reference F-IAB-012 Page Page 1 of 6 Revision 2 Please complete all sections and submit electronically to anne.clarke@nsai.ie Section
C-01 FIRE DECKS AND BULKHEADS
Guideline No.: C-01(201510) C-01 FIRE DECKS AND BULKHEADS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
ISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO DE 2016
ISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO DE 2016 ISO/JTC1 Information Technology ATÉ 22 DE DEZEMBRO DE 2016 ISO/IEC DIS 17203 (Ed 2) - Information technology -- Open Virtualization Format (OVF) specification
CHEMICALS AND CONSUMER PRODUCTS
UGANDA NATIONAL BUREAU OF STANDARDS (UNBS) STANDARDS DEPARTMENT STANDARDS DEVELOPMENT WORK PROGRAM January to June 2018 Proposed Title Edition Number ICS Number Standard Number Stage Stage Update Date
Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method 3 EN 280:2013+A1:2015
Nr. Standard reference Title 1 EN 49-2:2015 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 2: Application
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
Fire fighting Portable fire extinguishers Performance and construction
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7165 Third edition 2017-07 Fire fighting Portable fire extinguishers Performance and construction Lutte contre l incendie Extincteurs portatifs
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Chatsworth Technology Park Dunston Road Chesterfield Derbyshire S41 8XA Contact: Mr M Watson Tel: +44 (0)1246 263861 Fax: +44 (0)1246 260919
Standards - Withdrawn The dates in brackets following the document number are the year of publication and the withdrawal date.
SANS 19 (2007) (2018-03-02) The inspection, testing and examination of mobile cranes Covers provisions for the inspection, testing and examination of mobile cranes in use. Does not cover the inspection,
List of tests (2018)
SRI Center for Physical Sciences and Technology Textile Institute Department of Textiles Physical-Chemical testing List of tests (2018) 1. Fibre content analysis 1.1 Melting point determination ISO/TR
CONTINUOUS GEOMEMBRANES FOR ON SITE APPLICATION. PDA Europe 2012 Annual Conference Istanbul, November
POLYMERIC GEOMEMBRANES ARE MADE OF: - POLYOLEOFINS (HDPE, LDPE, LLDPE, TPO, VLDPE). - EPDM. - PVC LIMITATIONS OF CONVENTIONAL POLYMERIC GEOMEMBRANES: - REQUIRE WELDING AT JOINTS AND SEAMS (heat or ultrasound).
IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018
IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC/TC 2 - Rotating machinery IEC 60034-14:2018 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56
ISO/TR TECHNICAL REPORT. Footwear Performance requirements for components for footwear Outsoles
Provläsningsexemplar / Preview TECHNICAL REPORT ISO/TR 20880 First edition 2007-02-15 Footwear Performance requirements for components for footwear Outsoles Chaussures Exigences de performance pour les
Coatings for protection of FRP structures with heavy rain erosion loads
CLASS PROGRAMME Type approval DNVGL-CP-0424 Edition May 2016 Coatings for protection of FRP structures with heavy rain erosion loads The content of this service document is the subject of intellectual
Bitumen and bituminous binders - Development of performance- related specifications: status report 2005
IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. I.S. CEN TR 15352:2006 Date published 23 APRIL 2012 Bitumen and bituminous binders - Development of performance-
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Units 41 & 43 The Listerhills Park of Science and Commerce Campus Road Bradford BD7 1HR Contact: Ms J Pinkess Tel: +44 (0)1274 303080 Fax:
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
STS Directory Accreditation number: STS 0030
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:
Section 714. GEOTEXTILE AND GEOCOMPOSITE DRAIN MATERIAL
Section 714. GEOTEXTILE AND GEOCOMPOSITE DRAIN MATERIAL 714.01 Geotextile. Use long-chain, synthetic polymers, composed at least 95 percent by mass of polyolefins or polyesters, to manufacture geotextile
OMAN November 2nd 2006 Middle East WFHSS Workshop
OMAN November 2nd 2006 Middle East WFHSS Workshop TIM GALEKOP Director of Global Business Development Medical Fabrics Convenor CEN TC 102 WG 4 Expert ISO TC 198 WG 7 Expert CEN TC 205 WG 14 CEN / ISO Council
Uusimmat CENin julkaisut. Tässä luettelossa mainitaan uusimmat CEN-julkaisut ajalta
Uusimmat CENin julkaisut Tässä luettelossa mainitaan uusimmat CEN-julkaisut ajalta 1.4.2015 30.6.2015. 01.020 Terminology (principles and coordination) EN ISO 17100:2015 Translation Services. Requirements
Contents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
Ministerial Decree No. 14/2005 (VI. 28.) KvVM. on the rules concerning the screening surveys of remedial site investigations.
Ministerial Decree No. 14/2005 (VI. 28.) KvVM on the rules concerning the screening surveys of remedial site investigations Authorised by the provisions set forth in clause m), Paragraph (8), Article 110
UV-Ozone Technology and Applications
UV-Ozone Technology and Applications Introducing SAMCO Your Global Partner in Progress Over the last 30 Years SAMCO has provided Over 3,200 Thin Film Solutions to our Global Partners in 23 Countries The
ISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
ISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/JTC 1 - Information technology ISO/IEC 14651:2016 - Information technology - International string ordering and comparison - Method for comparing character strings and description
GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES
ATS-UP03 GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES Reviewed by: Natalija Jovičić Zarić MSc, Quality Manager (QM) Approved by: Dejan Krnjaić PhD, Director Issue/Revision:
ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, Απιθμόρ 202 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, 12.6.2015 Απιθμόρ 202 1430 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηνπνίεζε βάζεη ηνπ άξζξνπ 5 ηνπ βαζηθνύ Νόκνπ 156(Η)