STANDARDS May UPDATE. New standard. Online version. BS ISO 31000:2009 Risk management. Principles and guidelines

Transcription

1 UPDATE STANDARDS May 2010 Online version UpdateStandardsOnline Contents 4 Quick Reference Guide 8 New and revised British Standards 8 BS EN and DD ENV publications 16 British Standard implementations 18 Published Documents 18 Drafts for Development 19 Aerospace series 19 Corrigenda to British Standards 20 Updated British Standards 22 British Standards confirmed 23 British Standards proposed for obsolescence 23 British Standards proposed for withdrawal and withdrawn 26 British Standards under review New standard BS ISO 31000:2009 Risk management. Principles and guidelines 26 New work started 30 Draft British Standards 34 Documents not issued as DPCs 35 Documents issued under the CEN/CENELEC UAP procedure 35 CEN publications 38 CENELEC publications 40 IEC publications 44 ISO publications *See back cover for more information raising standards worldwide

2 Customer Services Your first point of contact 9 am to 5 pm GMT Monday to Friday Call Customer Services now: To purchase standards and publications For further information on standards, publications and our services To find out about BSI Membership To reserve your place on one of our seminars and conferences. Help us give you the best customer service If you have done business with us before, please quote your account number When phoning, always take a note of the name of the Customer Service Advisor you are speaking to If you are responding to literature please quote the reference code. How to order Telephone +44 (0) Website orders@bsigroup.com to place an order info@bsigroup.com to make an enquiry Fax +44 (0) Post BSI Customer Services 389 Chiswick High Road London W4 4AL We welcome all your feedback, please contact us with your comments. Your calls may be recorded and/or monitored to help us improve our service to you. **ATTENTION BSI MEMBERS** If you are a BSI Member you can order on your credit account. Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

3 +44 (0) PAS 900 Code of Practice for Wheelchair Passport Schemes This Publicly Available Specification (PAS) gives recommendations for the provision and operation of systems to present essential information required by wheelchair users, their carers, vehicle drivers and their assistants, for the safer transport of wheelchair seated passengers in a road vehicle. PAS 900 is meant for use in transport operations where a risk assessment of the individual passenger s transport needs has taken place, as part of an overall risk management process. Read more and order at AGM 2010 and drinks reception Wednesday 26 May 2010 The BSI AGM will take place at 4pm on Wednesday 26 May, at BSI Group headquarters in London. After the formal business proceedings have concluded, an informal drinks reception will be held where you can meet the BSI Board and staff. We would be delighted if you could attend both the AGM and drinks reception. To attend, please complete the Notice of Attendance Form contained within the official Notice of Annual General Meeting mailed to Subscribing Members on 30 April For further information please contact the Membership Department. BSI Affiliates Best practice, safety and professionalism They re yours to pass on with BSI affiliates. By linking to the standards your customers or members need on your website, you ll simplify the process of finding and using standards. And we ll reward you with a generous commission. You ll be providing a valuable service while helping to raise standards in your industry, which is good for everybody. Become a BSI affiliate and Pass it on! Contact: bs.affiliates@bsigroup.com +44 (0) raising standards worldwide

4 British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS , 23 BS BS BS BS , 23 BS DD CEN/TS DD CEN/TS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS ISO , 23 PD CEN/TR NA to BS EN NA to BS EN Consumer products and services BS , 23 BS BS , 23 BS DD CEN ISO/TS DD CEN ISO/TS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 23 BS EN BS EN BS EN BS EN , 24 BS ISO , 23 BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS DD CLC/TS , 24 Electrotechnical BS BS , 23 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 25 BS EN , 24 BS EN , 19, 22 BS EN , 19, 20, 23, 24, 25 BS EN BS EN , 22 BS EN , 24 BS EN BS EN BS EN BS EN , 25 BS EN BS EN , 23 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS IEC BS IEC BS CECC DD IEC/TS , 25 DD CLC/TS , 25 PD CLC/TR PD IEC/TR PD IEC/TR PD IEC/TR BS QC , 24 BS QC , 24 BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC Engineering BS BS BS BS BS BS BS BS BS BS BS BS , 23 BS , 25 BS BS , 24 BS , 24 DD CEN/TS BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 24 BS EN ISO , 24 BS EN BS EN BS EN BS EN ISO , 23 BS EN ISO , 24 BS EN BS EN ISO , 24 BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN , 23 BS EN ISO , 25 BS EN BS EN BS EN BS EN BS EN ISO , 24 BS EN ISO BS EN ISO , 24 BS EN , 24 BS EN , 24 BS ISO BS ISO BS ISO , 26 BS ISO , 26 BS ISO , 24 BS ISO BS ISO , 25 BS ISO BS ISO , 26 BS ISO BS ISO , 24 BS ISO , 25 BS ISO BS ISO BS ISO BS ISO BS ISO Prices may be subject to change. Update Standards May 2010

5 British Standards - Quick Reference Guide continued... BS ISO BS ISO BS 4A BS 4A BS 3S BS 4S BS AU , 17, 26 BS AU , 26 Health and environment BS , 16 BS DD CEN/TS DD CEN/TS BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 16 BS EN BS EN BS ISO , 17 BS ISO/TR BS ISO PD CEN/TR Information systems BS BS EN ISO BS EN BS ISO/IEC BS ISO/IEC DD ISO/TS DD ISO/TS PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/IEC TR Management systems BS DD BS EN ISO Materials and chemicals BS , 23 BS , 12, 24 BS BS , 24 DD CEN/TS , 24 DD CEN ISO/TS , 24 BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 11 BS EN ISO BS EN ISO BS EN ISO , 21 BS EN ISO , 24 BS EN BS EN ISO BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN , 24 BS EN , 24 BS EN BS EN ISO BS EN BS EN BS EN , 24 BS EN , 24 BS EN ISO BS EN BS EN ISO , 24 BS EN ISO BS EN ISO , 23 BS ISO , 24 BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR PD CEN/TR Alpha-numeric sequence of British Standards quoted in this issue BS , 23 BS BS BS , 23 BS , 12, 24 BS BS BS BS BS BS BS BS BS , 23 BS , 23 BS BS BS BS BS , 16 BS BS BS BS , 23 BS , 23 BS , 25 BS BS BS , 23 BS , 24 BS BS , 24 BS , 24 BS BS BS DD DD CEN/TS DD CEN/TS , 24 DD CEN/TS DD CEN/TS DD CEN/TS DD CEN/TS DD CEN ISO/TS DD CEN ISO/TS DD CEN ISO/TS , 24 BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 23 BS EN BS EN BS EN ISO , 11 BS EN BS EN BS EN BS EN BS EN Update Standards May 2010 Prices may be subject to change. 5

6 Alpha-numeric sequence of British Standards continued... BS EN BS EN BS EN ISO , 24 BS EN ISO BS EN ISO , 24 BS EN BS EN BS EN BS EN ISO , 23 BS EN ISO , 24 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 24 BS EN BS EN ISO BS EN ISO , 21 BS EN ISO BS EN ISO , 24 BS EN ISO BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN , 23 BS EN ISO , 25 BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN , 24 BS EN , 24 BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN ISO BS EN , 24 BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN BS EN BS EN ISO , 24 BS EN ISO , 24 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 24 BS EN , 24 BS EN ISO , 23 BS EN , 24 BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 25 BS EN , 24 BS EN , 19, 22 BS EN , 19, 20, 23, 24, 25 BS EN , 16 BS EN BS EN , 22 BS EN , 24 BS EN BS EN BS EN BS EN , 25 BS EN BS EN , 23 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS ISO , 23 BS ISO BS ISO BS ISO , 26 BS ISO BS ISO , 26 BS ISO , 24 BS ISO BS ISO , 25 BS ISO , 17 BS ISO , 24 BS ISO BS ISO BS ISO BS ISO , 26 BS ISO , 23 BS ISO BS ISO , 24 BS ISO , 25 BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO/TR BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS IEC BS IEC BS CECC DD ISO/TS DD ISO/TS DD ISO/TS DD ISO/TS DD CLC/TS , 24 DD CLC/TS , 25 DD IEC/TS , 25 PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/IEC TR PD CLC/TR PD IEC/TR PD IEC/TR PD IEC/TR BS 4A BS 4A BS 4S BS 3S BS QC , 24 BS QC , 24 BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS QC BS AU , 17, 26 BS AU , 26 NA to BS EN NA to BS EN Prices may be subject to change. Update Standards May 2010

7 New guidance to help you implement information security management BS ISO/IEC 27003:2010 Information technology. Security techniques. Information security management system implementation guidance No matter what size your organization, this implementation guidance focuses on the critical aspects needed for successful design and implementation of an information security management system (ISMS) in accordance with ISO/IEC It will help you to develop a process for information security management. Using BS ISO/IEC will reassure stakeholders that risks to information assets are continuously maintained within the acceptable information security bounds set by your organization. Read more and buy an instant download BS ISO/IEC 27004:2009 Information technology. Security techniques. Information security management. Measurement This standard provides guidance on the development and use of measures and measurement so you can assess the effectiveness your information security management system (ISMS) and controls or groups of controls, as specified in BS ISO/IEC Read more and buy an instant download New book also available Information Security Risk Management: Handbook for ISO/IEC Edward Humphreys If you need a practical handbook on how to use and apply ISO/IEC and ISO/IEC for maximum benefit, then this book is for you. Whether you are a CEO, manager or an IT professional, then this easy-to-follow guide will show you all you need to deliver an effective information security management system (ISMS). Read the book and learn from real-life examples that show you how to assess the risks, protect your business assets and get the most from your ISMS. With its clear layout, each chapter is divided into short easily-digestible sections; you ll also learn how to demonstrate cost-benefit analysis and return on investment, so you can get buy-in to secure funding. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code 27003E-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

8 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 799-5:2010 Oil burning equipment. Carbon steel oil storage tanks. Specification supersedes BS 799-5:1987 ISBN members, non-members RHE/13 BS 5974:2010 Code of practice for the planning, design, setting up and use of temporary suspended access equipment supersedes BS 5974:1990 ISBN members, non-members B/514/39 BS :2010 Building and civil engineering. Vocabulary. Introduction and index supersedes BS :2002 ISBN members, non-members B/500/-/1 BS 6580:2010 Specification for corrosion inhibiting, engine coolant concentrate ( antifreeze ) supersedes BS 6580:1992+A1:1993 ISBN I/- BS 6701:2010 Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance supersedes BS 6701:2004 ISBN TCT/7 BS :2010 Security dogs. Code of practice for the use of detection dogs ISBN GW/3 BS 9295:2010 Guide to the structural design of buried pipelines ISBN members, non-members B/505 BS 10999:2010 Specification for distress signal units for the fire and rescue service ISBN PH/4 NA to BS EN :2006 UK National Annex to Eurocode 3. Design of steel structures. Towers, masts and chimneys. Towers and masts ISBN B/525/32 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN ISO 105-C08:2010 Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator supersedes BS EN ISO 105-C08:2002+A1:2008 ISBN TCI/81 BS EN 196-6:2010 Methods of testing cement. Determination of fineness supersedes BS EN 196-6:1992 ISBN members, non-members B/516 BS EN 208:2009 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) supersedes BS EN 208:1999 ISBN PH/2 BS EN 249:2010 Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets. Requirements and test methods ISBN B/503 BS EN 267:2009 Automatic forced draught burners for liquid fuels supersedes BS EN 267:1999 ISBN members, non-members GSE/27 BS EN 338:2009 Structural timber. Strength classes supersedes BS EN 338:2003 ISBN B/518 BS EN :2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature supersedes BS EN :2003 ISBN RPI/13 BS EN 1656:2009 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1) supersedes BS EN 1656:2000 ISBN members, non-members CH/216 BS EN 1676:2010 Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications supersedes BS EN 1676:1997 ISBN NFE/35 8 Prices may be subject to change. Update Standards May 2010

9 Eurocodes New books to help guide you through the Eurocodes transition Structural Eurocodes are a suite of design codes that will harmonize technical specifications for building and civil engineering works across Europe. Their introduction in March 2010 means that more than 50 British Standards have been withdrawn. The change has been described as the single most important change to construction standards. It is expected that Eurocodes will not just dominate building design in the UK and Europe, but also have a major impact on many other parts of the world. The Essential Eurocodes Transition Guide Edited by John Roberts This guide brings together advice and key insights from Eurocodes experts, to help you use and apply the new Codes and make the transition as quickly and painlessly as possible. In addition to coverage of the underlying structure, and industry view of the Eurocodes, individual chapters address the technical aspects of each Eurocode. This is an invaluable aid for practising civil and structural engineers, as well as regulators, academics and students and all those involved with the structure and design of public sector dwellings at this time of change. Read more and buy at Concise Eurocodes: Wind Loading Ian Burgess, Amy Green, Anthony Abu This new guide is for civil and structural engineers and building control officers. It will assist consulting engineers by providing a briefer and more accessible presentation of the design procedures associated with the relevant Eurocode. It is laid out in the same format as the Eurocodes and maintains the same sections as the Eurocodes. The Nationally Determined Parameters of the National Annex to the relevant Eurocode are included, as well as some of the more important non-contradictory complementary information (NCCI). It contains cross-references, from the BS clause to the associated clause in the relevant Eurocode (or its National Annex), BS EN 1990 (or its National Annex) or related Published Document. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code EUROE-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

10 BS EN Publications continued... BS EN 1706:2010 Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties supersedes BS EN 1706:1998 ISBN NFE/35 BS EN :2010 code 313. Product standard ISBN BS EN :2010 code 315. Product standard ISBN BS EN :2010 code 316. Product standard ISBN BS EN :2010 code 327. Product standard ISBN BS EN :2010 code 328. Product standard ISBN BS EN :2010 code 330. Product standard ISBN BS EN :2010 code 334. Product standard ISBN BS EN :2010 code 337. Product standard ISBN BS EN :2010 code 338. Product standard ISBN BS EN :2010 code 345. Product standard ISBN BS EN :2010 code 356. Product standard ISBN BS EN :2010 code 376. Product standard ISBN BS EN :2010 code 377. Product standard ISBN BS EN :2010 code 382. Product standard ISBN BS EN :2010 code 387. Product standard ISBN BS EN :2010 code 394. Product standard ISBN BS EN :2010 code 401. Product standard ISBN BS EN :2010 code 600. Product standard ISBN BS EN :2010 code 680. Product standard ISBN BS EN ISO 2825:2010 Spices and condiments. Preparation of a ground sample for analysis supersedes BS :1982 ISBN AW/7 BS EN 2863:2010 Aerospace series. Nuts, anchor, self-locking, fixed, 90º corner, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºc ISBN ACE/12 BS EN :2010 Aerospace series. Macrostructure of titanium and titanium alloy wrought products. Macrostructure of bar, section, forging stock and forgings ISBN /-/49 BS EN ISO :2010 Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Assessment of performance after cleaning and finishing supersedes BS EN ISO :1998 ISBN TCI/82 10 Prices may be subject to change. Update Standards May 2010

11 BS EN ISO :2010 Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Procedure for testing performance when cleaning and finishing using tetrachloroethene supersedes BS EN ISO :1998 ISBN TCI/82 BS EN 3226:2009 Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235ºC ISBN ACE/12 BS EN 3227:2010 Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 1100 MPa (at ambient temperature)/235ºc ISBN ACE/12 BS EN 3537:2010 Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºc ISBN ACE/12 BS EN 3538:2010 Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºc ISBN ACE/12 BS EN 3539:2010 Aerospace series. Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºc ISBN ACE/12 BS EN :2009 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90º, unsealed, self-locking with clamp strain relief for EN Product standard ISBN BS EN 3753:2010 Aerospace series. Nuts, anchor, self-locking, fixed, 60º corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235ºc ISBN ACE/12 BS EN ISO 3908:2009 Hardmetals. Determination of insoluble (free) carbon. Gravimetric method supersedes BS EN 23908:1993 ISBN ISE/65 BS EN ISO 3924:2010 (BS :2010) Petroleum products. Determination of boiling range distribution. Gas chromatography method ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information. BS EN ISO :2009 Agricultural machinery. Safety. General requirements supersedes BS EN ISO :2005 ISBN members, non-members AGE/6 BS EN ISO :2009 Agricultural machinery. Safety. Combine harvesters, forage harvesters and cotton harvesters supersedes BS EN 632:1996 ISBN members, non-members AGE/32 BS EN 4474:2009 Aerospace series. Aluminium pigmented coatings. Coating methods ISBN BS EN :2009 Aerospace series. Weldability and brazeability of materials in aerospace constructions. Homogeneous assemblies of heat resisting Ni or Co base alloys ISBN members, non-members 1/-/2 BS EN 4662:2010 Aerospace series. Test specification for vibration control components ISBN ACE/12 BS EN ISO 4945:2009 Steel. Determination of nitrogen content. Spectrophotometric method supersedes BS :1985 ISBN ISE/102 BS EN ISO 5821:2009 Resistance welding. Spot welding electrode caps supersedes BS EN 25821:1992 ISBN WEE/29 BS EN 6069:2009 Aerospace series. Rivet, 100º reduced flush head, close tolerance. Inch series ISBN ACE/12 BS EN ISO 7885:2010 Dentistry. Sterile injection needles for single use supersedes BS EN ISO 7885:2001 ISBN CH/106/4 BS EN ISO :2010 Continuously cold-rolled stainless steel. Tolerances on dimensions and form. Narrow strip and cut lengths supersedes BS EN ISO 9445:2006 ISBN ISE/105 BS EN ISO :2010 Continuously cold-rolled stainless steel. Tolerances on dimensions and form. Wide strip and plate/sheet supersedes BS EN ISO 9445:2006 ISBN ISE/105 BS EN 10283:2010 Corrosion resistant steel castings supersedes BS EN 10283:1999 ISBN ISE/111 Update Standards May 2010 Prices may be subject to change. 11

12 BS EN Publications continued... BS EN ISO :2010 Biological evaluation of medical devices. Toxicokinetic study design for degradation products and leachables supersedes BS EN ISO :2009 ISBN CH/194 BS EN ISO :2009 Textile machinery. Safety requirements. Common requirements supersedes BS EN ISO :2005 ISBN members, non-members TCI/33 BS EN ISO 11295:2010 Classification and information on design of plastics piping systems used for renovation supersedes BS EN 13689:2002 ISBN members, non-members PRI/88/3 BS EN ISO :2009 Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the definition, validation and maintenance of a sterilization process supersedes BS EN ISO :2000 ISBN CH/198 BS EN 12183:2009 Manual wheelchairs. Requirements and test methods supersedes BS EN 12183:1999 ISBN members, non-members CH/173/1 BS EN 12184:2009 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods supersedes BS EN 12184:1999 ISBN members, non-members CH/173/1 BS EN :2010 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test. Long term test supersedes BS EN :2003 ISBN B/523 BS EN 12507:2005 Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries supersedes BS EN 12507:2000 ISBN TW/2 BS EN ISO :2010 Tissue paper and tissue products. Determination of tensile strength of perforated lines. Calculation of perforation efficiency ISBN PAI/11 BS EN :2010 Railway applications. Structural requirements of railway vehicle bodies. Locomotives and passenger rolling stock (and alternative method for freight wagons) supersedes BS EN 12663:2000 which remains current ISBN members, non-members RAE/1/-/2 BS EN 13301:2010 (BS :2010) Bitumen and bituminous binders. Determination of staining tendency of bitumen supersedes the dual numbered standard BS EN 13301:2003, BS :2003 ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information. BS EN 13302:2010 (BS :2010) Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus supersedes the dual numbered standards BS EN 13302:2003, BS :2003, BS EN :2003, BS :2003 and BS EN 14896:2006, BS :2006 ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information. BS EN ISO 13351:2009 Fans. Dimensions supersedes the dual numbered standards BS ISO 6580:2005, BS 6339:2005 and BS EN ISO 13351:2008, BS 848-4:1997 ISBN MCE/17 BS EN 13507:2010 Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying supersedes BS EN 13507:2001 ISBN STI/40 BS EN ISO :2010 Health informatics. Electronic health record communication. Interface specification ISBN IST/35 BS EN ISO 14419:2010 Textiles. Oil repellency. Hydrocarbon resistance test supersedes BS EN ISO 14419:1999 ISBN TCI/24 BS EN 14695:2010 Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics ISBN B/546/9 BS EN ISO 14937:2009 Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices supersedes BS EN ISO 14937:2001 ISBN members, non-members CH/198 BS EN :2010 Solid biofuels. Fuel specifications and classes. General requirements supersedes DD CEN/TS 14961:2005 ISBN members, non-members PTI/17 BS EN :2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. General requirements ISBN FSH/22/5 BS EN 15304:2010 Determination of the freeze-thaw resistance of autoclaved aerated concrete supersedes BS EN 15304:2007 ISBN B/523 BS EN ISO 15487:2010 Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying supersedes BS EN ISO 15487:2001 ISBN TCI/82 12 Prices may be subject to change. Update Standards May 2010

13 BSI Conferences Bioenergy Understanding obligations & opportunities May 2010, CBI Conference Centre, London BSI's Bioenergy conference and workshop will help you prepare for new renewable energy standards and legislation. It will deliver guidance and best practice for meeting renewable obligations and provide a forum for the industry to drive bioenergy production, standardization and use. In addition to presentations and case studies, discussion sessions with industry experts will allow you to share knowledge, experiences and challenges of producing bioenergy and driving demand. Attend the Bioenergy conference to: Understand the impact of new legislation on your business Gain invaluable insight on the bioenergy market and discover a range of funding opportunities Determine how to implement standards to ensure product quality and sustainability Learn how to achieve sustainable biomass production, processing and procurement Discuss what guidance is needed with decision makers in the field Explore the opportunities and overcome the challenges in bioenergy technology. Read more about the Bioenergy conference at: Who should attend? Biofuel producers Biomass producers Utility companies Energy providers Bioenergy consultants Equipment manufacturers Regulators Book your place today! (0) orders@bsigroup.com Supporting organizations: To book online visit or contact BSI Customer Services quoting marketing reference code CTBIOE-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

14 BS EN Publications continued... BS EN 15622:2010 Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS) ISBN NFE/34 BS EN 15636:2010 Sanitary appliances. Shower trays made from impact modified extruded acrylic sheets. Requirements and test methods ISBN B/503 BS EN :2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for facade elements ISBN B/547 BS EN :2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing ISBN B/547 BS EN :2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for sanitary joints ISBN B/547 BS EN :2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for pedestrian walkways ISBN B/547 BS EN :2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Evaluation of conformity and marking ISBN B/547 BS EN 15743:2010 Supersulfated cement. Composition, specifications and conformity criteria supersedes BS 4248:2004 ISBN B/516 BS EN 15845:2010 Paper and board. Determination of the cytotoxicity of aqueous extracts ISBN PAI/11 BS EN 15848:2010 Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing ISBN B/504/-/13 BS EN :2009 Extended applications of results from fire resistance tests for service installations. Penetration seals ISBN FSH/22 BS EN ISO :2010 Leather. Chemical tests for the determination of certain azo colorants in dyed leathers. Determination of certain aromatic amines derived from azo colorants supersedes DD CEN ISO/TS 17234:2003 ISBN TCI/69 BS EN ISO 17635:2010 Non-destructive testing of welds. General rules for metallic materials supersedes BS EN 12062:1998 ISBN WEE/46 BS EN ISO :2010 Dentistry. Base polymers. Orthodontic base polymers ISBN members, non-members CH/106/2 BS EN ISO 20815:2010 Petroleum, petrochemical and natural gas industries. Production assurance and reliability management supersedes BS EN ISO 20815:2008 ISBN members, non-members PSE/17 BS EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems supersedes BS EN ISO 21969:2006 ISBN CH/121/6 BS EN ISO 23279:2010 Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds supersedes BS EN 1713:1998 ISBN WEE/46 BS EN ISO 24998:2008 Plastics laboratory ware. Single-use Petri dishes for microbiological procedures supersedes BS 611-2:1990 ISBN LBI/36/1 BS EN :2010 Active implantable medical devices. Particular requirements for cochlear and auditory brainstem implant systems ISBN members, non-members CH/150/6 BS EN :2009 Alarm systems. Intrusion and hold-up systems. Warning devices supersedes DD CLC/TS :2006 ISBN members, non-members GW/1/1 BS EN :2008 Communication cables. General considerations for the use of cables. Guide to use ISBN members, non-members EPL/46 BS EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications supersedes BS EN 50364:2002 ISBN GEL/106 BS EN :2010 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kv A.C. and not exceeding 36 kv A.C. Guide to use ISBN GEL/20/16 To order visit 14 Prices may be subject to change. Update Standards May 2010

15 BS EN :2010 Fibre organisers and closures to be used in optical fibre communications systems. Product specifications. Non-sealed closures for air blown fibre microduct cable, for category S & A ISBN members, non-members BS EN :2009 Electroacoustics. Simulators of human head and ear. Ear simulator for the measurement of supra-aural and circumaural earphones supersedes BS EN :1998 and BS EN :1998 ISBN EPL/29 BS EN :2009 Household and similar electrical appliances. Safety. Particular requirements for room heaters supersedes BS EN :2003 which remains current ISBN members, non-members CPL/61/07 BS EN :2009 Fixed capacitors for use in electronic equipment. Generic specification supersedes BS :1982, BS EN :2001, BS QC :1983 and BS QC :1991 ISBN members, non-members BS EN :2009 Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis supersedes BS EN :2000 which remains current ISBN members, non-members CH/62/4 BS EN :2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray equipment for radiography and radioscopy supersedes the dual numbered standards BS EN :1998, BS :1998 and BS EN :1995, BS :1995 which remain current. Partially supersedes BS EN :1993, BS :1993 ISBN members, non-members CH/62/2 BS EN :2007 Automatic electrical controls for household and similar use. Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type supersedes BS EN :1993 which remains current ISBN CPL/72 BS EN :2009 Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers supersedes BS EN :2003+A1:2009 which remains current ISBN CPL/116 BS EN :2009 Hand-held motor-operated electric tools. Safety. Particular requirements for tappers supersedes BS EN :2003+A1:2008 which remains current ISBN CPL/116 BS EN :2009 Hand-held motor-operated electric tools. Safety. Particular requirements for planers supersedes BS EN :2003 ISBN CPL/116 BS EN :2009 Hand-held motor-operated electric tools. Safety. Particular requirements for strapping tools supersedes BS EN :2004+A1:2008 which remains current ISBN CPL/116 BS EN :2009 Hand-held motor-operated electric tools. Safety. Particular requirements for band saws supersedes BS EN :2003+A1:2009 which remains current ISBN CPL/116 BS EN :2009 Safety of transportable motor-operated electric tools. Particular requirements for mitre saws supersedes BS EN :2002 which remains current ISBN members, non-members CPL/116 BS EN :2009 Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws supersedes BS EN :2003 which remains current ISBN members, non-members CPL/116 BS EN :2010 Fibre optic communication subsystem test procedures. General communication subsystems. Light source encircled flux measurement method supersedes BS EN :2003 ISBN members, non-members GEL/86/3 BS EN :2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Composite temperature/humidity cyclic test supersedes BS EN :1997 ISBN BS EN :2010 Fibre optic interconnecting devices and passive components performance standard. Sealed closures for category A. Aerial ISBN BS EN :2010 Fibre optic interconnecting devices and passive components performance standard. Sealed closures for category G. Ground ISBN BS EN :2010 Fibre optic interconnecting devices and passive components performance standard. Sealed closures for category S. Subterranean ISBN BS EN :2009 Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre ISBN BS EN :2009 Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-pc single mode fibres ISBN BS EN :2010 Communication networks and systems for power utility automation. Configuration description language for communication in electrical substations related to IEDs supersedes BS EN :2004 ISBN members, non-members PEL/57 Update Standards May 2010 Prices may be subject to change. 15

16 BS EN Publications continued... BS EN :2009 Instrument transformers. General requirements ISBN members, non-members PEL/38 BS EN 61918:2008 Industrial communication networks. Installation of communication networks in industrial premises ISBN members, non-members AMT/7 BS EN :2008 Mobile and portable DVB-T/H radio access. Interface specification supersedes BS EN :2006 ISBN members, non-members EPL/100 BS EN 62083:2009 Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems supersedes BS EN 62083:2001 which remains current ISBN members, non-members CH/62/3 BS EN :2010 Fibre optic active components and devices. Package and interface standards. Discrete vertical cavity surface emitting laser packages ISBN GEL/86/3 BS EN :2010 Noise suppression sheet for digital devices and equipment. Characterization of parameters of noise suppression sheet ISBN EPL/51 BS EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields ISBN members, non-members CPL/34 BS EN :2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use supersedes the dual numbered standard BS EN :1997, BS :1997 which remains current ISBN members, non-members CH/62/4 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 5-1:2009 Photography and graphic technology. Density measurements. Geometry and functional notation supersedes BS :1985 ISBN CPW/42 BS ISO 5-2:2009 Photography and graphic technology. Density measurements. Geometric conditions for transmittance density supersedes BS :2001 ISBN CPW/42 BS ISO 5-3:2009 Photography and graphic technology. Density measurements. Spectral conditions supersedes BS ISO 5-3:1995 ISBN members, non-members CPW/42 BS ISO 5-4:2009 Photography and graphic technology. Density measurements. Geometric conditions for reflection density supersedes BS ISO 5-4:1995 ISBN CPW/42 BS ISO :2009 Plain bearings. Thin-walled half bearings with or without flange. Measurement of wall thickness and flange thickness supersedes BS 7772:1994 ISBN MCE/12 BS ISO 3780:2009 Road vehicles. World manufacturer identifier (WMI) code supersedes BS AU 175-2b:1983 ISBN AUE/15 BS ISO :2009 Milk and milk products. Determination of residues of organochlorine compounds (pesticides). General considerations and extraction methods supersedes BS ISO :2000 ISBN AW/5 BS ISO :2009 Milk and milk products. Determination of residues of organochlorine compounds (pesticides). Test methods for crude extract purification and confirmation supersedes BS ISO :2000 ISBN members, non-members AW/5 BS ISO :2010 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre classification and nomenclature supersedes BS AU a:1992 ISBN AUE/4 BS ISO :2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements. Storage, handling and installation supersedes BS :1994 ISBN MCE/11 BS ISO :2009 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs supersedes BS ISO :2005 ISBN MCE/9 BS ISO :2008 Wheelchairs. Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range supersedes BS ISO :1997 ISBN CH/173/1 BS ISO :2009 Wheelchairs. Climatic tests for electric wheelchairs supersedes BS ISO :2001 ISBN CH/173/1 16 Prices may be subject to change. Update Standards May 2010

17 BS ISO :2009 Wheelchairs. Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers supersedes BS ISO :2003 ISBN CH/173/1 BS ISO :2010 Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Internal electro-optical distance-ranging method supersedes BS :1995 ISBN PTI/12 BS ISO 7612:2009 Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions supersedes BS ISO 7612:2006 ISBN MCE/22 BS ISO 8779:2010 Plastics piping systems. Polyethylene (PE) pipes for irrigation. Specifications ISBN PRI/88/2 BS ISO :2010 Optics and photonics. Optical coatings. Definitions supersedes BS ISO :1994 ISBN CPW/172/3 BS ISO :2010 Optics and photonics. Optical coatings. Optical properties supersedes BS ISO :1994 ISBN CPW/172/3 BS ISO 10191:2010 Passenger car tyres. Verifying tyre capabilities. Laboratory test methods supersedes BS AU b:1996 ISBN AUE/4 BS ISO 10679:2010 Steel. Cast tool steel ISBN ISE/111 BS ISO 10911:2010 Solid hardmetal end mills with cylindrical shank. Dimensions supersedes BS 7839:1995 ISBN MTE/18 BS ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application supersedes BS ISO :2000, BS ISO :2000, BS ISO :2000, BS ISO :2001, BS ISO :2005, BS ISO :2005, BS ISO :2005 and BS ISO :2005 ISBN members, non-members NCE/2 BS ISO :2010 Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture. Dynamic testing of satellite-based positioning devices ISBN AGE/6 BS ISO 12214:2010 Road vehicles. Direction-of-motion stereotypes for automotive hand controls supersedes BS ISO 12214:2002 ISBN AUE/12 BS ISO :2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Converting equipment and systems ISBN members, non-members PAI/43 BS ISO :2010 Hydrogen generators using fuel processing technologies. Test methods for performance ISBN members, non-members PVE/3/8 BS ISO :2010 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Electrical loads supersedes BS ISO :2006 ISBN AUE/16 BS ISO 16992:2010 Passenger car tyres. Spare unit substitutive equipment (SUSE) supersedes BS ISO 16992:2006 ISBN AUE/4 BS ISO 19334:2010 Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis supersedes BS ISO 19334:2006 ISBN STI/3 BS ISO 23954:2009 Oil of lime expressed, Persian type (Citrus latifolia Tanaka) ISBN AW/54 BS ISO/IEC 24735:2009 Information technology. Office equipment. Method for measuring digital copying machine productivity ISBN members, non-members IST/3 BS ISO 27025:2010 Space systems. Programme management. Quality assurance requirements ISBN members, non-members 8/-/5 BS ISO 10265:2008 Earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems supersedes BS :1998 ISBN B/513/1 BS ISO 14436:2010 Pulps. Standard tap water for drainability measurements. Conductivity 40 ms/m to 150 ms/m ISBN PAI/11 BS ISO 27894:2009 Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges ISBN MCE/8/-/4 Update Standards May 2010 Prices may be subject to change. 17

18 BS Implementations continued... BS ISO :2009 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Preparation of test specimens and determination of properties ISBN PRI/82 BS ISO 31000:2009 Risk management. Principles and guidelines ISBN members, non-members RM/1 BS ISO :2009 Non-invasive sphygmomanometers. Clinical validation of automated measurement type ISBN members, non-members CH/121/5 PUBLISHED DOCUMENTS PD ISO/TR :2009 Health informatics. Information security management for remote maintenance of medical devices and medical information systems. Requirements and risk analysis ISBN IST/35 PD ISO/TR :2009 Health informatics. Information security management for remote maintenance of medical devices and medical information systems. Implementation of an information security management system (ISMS) ISBN members, non-members IST/35 PD ISO/TR 11636:2009 Health informatics. Dynamic on-demand virtual private network for health information infrastructure ISBN members, non-members IST/35 PD ISO/TR 12309:2009 Health informatics. Guidelines for terminology development organizations ISBN IST/35 PD CEN/TR :2010 Prevention of crime. Urban planning and building design. Petrol stations ISBN members, non-members B/562 PD CEN/TR 15874:2009 Railway applications. Noise emission. Road test of standard for rail roughness measurement EN 15610:2009 ISBN members, non-members EH/1/2 PD CEN/TR 15993:2010 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination ISBN PTI/2 PD CEN/TR 15996:2010 Hydrometry. Measurement of snow water equivalent using snow mass registration devices ISBN CPI/113 PD ISO/IEC TR 18018:2010 Information technology. Systems and software engineering. Guide for configuration management tool capabilities ISBN members, non-members IST/15 PD CLC/TR 50542:2010 Railway applications. Communication means between safety equipment and man-machine interfaces (MMI) ISBN members, non-members GEL/9 PD IEC/TR :2010 Optical amplifiers. Distributed Raman amplification ISBN GEL/86/3 PD IEC/TR 61341:2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps ISBN CPL/34/1 PD IEC/TR 62476:2010 Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products ISBN GEL/111 DRAFTS FOR DEVELOPMENT DD 261:2010 Human reliability. Guide to the fundamental considerations ISBN members, non-members DS/1 DD CEN ISO/TS :2010 Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp. Semiquantitative method ISBN members, non-members AW/9 DD CEN/TS :2009 Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses. Production control ISBN members, non-members B/543 DD CEN/TS 15366:2009 Winter and road service area maintenance equipment. Solid absorbents intended for road usage ISBN members, non-members B/513 DD CEN/TS 15656:2009 Copper and copper alloys. Determination of phosphorus content. Spectrophotometric method ISBN members, non-members NFE/34 DD CEN ISO/TS :2009 Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. Cereals, pulses and milled cereal products ISBN members, non-members AW/4 DD ISO/TS 21547:2010 Health informatics. Security requirements for archiving of electronic health records. Principles ISBN members, non-members IST/35 18 Prices may be subject to change. Update Standards May 2010

19 DD ISO/TS 27105:2009 Milk and milk products. Determination of hen s egg white lysozyme by HPLC ISBN members, non-members AW/5 DD ISO/TS 27106:2009 Cheese. Determination of nisin A content by LC-MS and LC-MS-MS ISBN members, non-members AW/5 DD ISO/TS 27790:2009 Health informatics. Document registry framework ISBN members, non-members IST/35 DD CLC/TS :2010 Communication networks and systems for power utility automation. Guideline to exchanging information from a CDC-based data model using IEC or IEC supersedes DD IEC/TS :2009 ISBN members, non-members PEL/57 AEROSPACE SERIES BS 4S 500:2010 Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip supersedes BS 3S 500:1996+A1:1997 ISBN members, non-members 1 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts. Electric and hydraulic service lifts MHE/4 Also incorporates Amendment 1 BS EN :2007 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a microabrasion wear test RPI/13 BS EN ISO 1248:2008 Iron oxide pigments. Specifications and methods of test CORRIGENDUM 2 STI/1 Also incorporates Corrigenda 1 BS EN :2006 Eurocode 6. Design of masonry structures. Design considerations, selection of materials and execution of masonry B/525/6 BS EN :2006 Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures B/525/6 BS EN ISO 7096:2008 Earth-moving machinery. Laboratory evaluation of operator seat vibration B/513/1 BS EN :2005 Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners B/506/14 BS EN :2003+A1:2006 Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel PVE/3/3 Also incorporates Amendment 1 BS EN ISO 14001:2004 Environmental management systems. Requirements with guidance for use SES/1/1 BS EN 15543:2008 Glass packaging. Finishes for bottles. Screw thread finishes for bottles for non-carbonated liquids PKW/0/-/7 BS EN ISO 19739:2005 Natural gas. Determination of sulfur compounds using gas chromatography CORRIGENDUM 2 PTI/15 Also incorporates Corrigenda 1 BS EN ISO 21533:2003 Dentistry. Reusable cartridge syringes intended for intraligamentary injections CORRIGENDUM 2 CH/106/4 Also incorporates Corrigenda 1 BS EN 50366:2003+A1:2006 Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement CPL/61 Also incorporates Amendment 1 BS EN 55015:2006+A2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GEL/210/11 Also incorporates Amendments 1 & 2 BS EN :2002+A2:2006 Household and similar electrical appliances. Safety. General requirements CORRIGENDUM 6 CPL/61 Also incorporates Corrigenda 1, 2, 3, 4 & 5 and Amendments 2, 11, 12 & 13 BS EN :2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric D.C. capacitors Update Standards May 2010 Prices may be subject to change. 19

20 Corrigenda to British Standards continued... BS EN :2005 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric D.C. capacitors. Assessment levels E and EZ BS EN :2006 Fixed capacitors for use in electronic equipment. Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte. Assessment level EZ CORRIGENDUM 2 Also incorporates Corrigenda 1 BS EN :2007 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed aluminium electrolytic capacitors with non-solid electrolyte. Assessment level EZ BS EN :2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 BS EN :2005 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1. Assessment level EZ BS EN :2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 BS EN :2005 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2. Assessment level EZ BS EN :2006 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed polypropylene film dielectric metal foil D.C. capacitors CORRIGENDUM 2 Also incorporates Corrigenda 1 BS EN :2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polypropylene film dielectric D.C. capacitors BS EN :2005 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed metallized polypropylene film dielectric D.C. capacitors. Assessment levels E and EZ BS EN :2004 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 BS EN :2004 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1. Assessment level EZ BS EN :2004 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 BS EN :2004 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2. Assessment level EZ BS EN :2008 Varistors for use in electronic equipment. Generic specification BS 4A 113:1999 Specification for cadmium-plated, mushroomheaded, unified-thread, slotted drive, bolts CORRIGENDUM 2 ACE/12 Also incorporates Corrigenda 1 BS 4A 114:1999 Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength a class 880/1080) ACE/12 Please do not send confirmation of orders placed by telephone as it can lead to duplication UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS :1991+A5:2006 (ISO :1990+A5:2006) Freight containers. Specification and testing of series 1 freight containers. General cargo containers for general purposes AMENDMENT 5 TW/1 Also incorporates Amendments 1, 2, 3 & 4 BS :1984+A2:2010 Non-metallic conduit fittings for electrical installations. Specification for fittings and components of insulating material AMENDMENT 2 PEL/213 Also incorporates Amendment 1 BS :1982+A3:2010 Non-metallic conduit fittings for electrical installations. Specification for rigid conduits, fittings and boxes of insulating material AMENDMENT 3 PEL/213 Also incorporates Amendments 1 & 2 BS EN 453:2000+A1:2009 Food processing machinery. Dough mixers. Safety and hygiene requirements members, non-members MCE/3/5 BS EN 869:2006+A1:2009 Safety of machinery. Safety requirements for pressure metal diecasting units members, non-members MCE/3/10 BS EN 1057:2006+A1:2010 Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications members, non-members NFE/34/3 BS EN 1495:1997+A2:2009 Lifting platforms. Mast climbing work platforms AMENDMENT members, non-members MHE/12 Also incorporates Amendment 1 20 Prices may be subject to change. Update Standards May 2010

21 BS EN :1998+A2:2009 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Rear-end loaded refuse collection vehicles AMENDMENT members, non-members B/508/1 Also incorporates Amendment 1 BS EN :2005+A1:2009 Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Side loaded refuse collection vehicles members, non-members B/508/1 BS EN 1820:2005+A1:2009 Anaesthetic reservoir bags CH/121/5 BS EN :2002+A1:2009 Safety of woodworking machines. Circular sawing machines. Circular saw benches/ up-cutting cross-cut sawing machines members, non-members MTE/23 BS EN :2002+A1:2009 Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading members, non-members MTE/23 BS EN :2007+A1:2009 Eurocode 9. Design of aluminium structures. General structural rules members, non-members B/525/9 BS EN ISO :2005+A1:2009 Textile machinery. Safety requirements. Nonwoven machinery TCI/33 BS EN ISO :2005+A1:2009 Textile machinery. Safety requirements. Yarn processing, cordage and rope manufacturing machinery TCI/33 BS EN ISO :2005+A1:2009 Textile machinery. Safety requirements. Preparatory machinery to weaving and knitting TCI/33 BS EN ISO :2005+A1:2009 Textile machinery. Safety requirements. Fabric manufacturing machinery TCI/33 BS EN ISO :2005+A1:2009 Textile machinery. Safety requirements. Dyeing and finishing machinery members, non-members TCI/33 BS EN 12342:1998+A1:2009 Breathing tubes intended for use with anaesthetic apparatus and ventilators CH/121/5 Also incorporates Corrigenda 1 BS EN 12472:2005+A1:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items STI/53 BS EN 12864:2001+A3:2009 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures AMENDMENT members, non-members GSE/24 Also incorporates Amendments 1 & 2 BS EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry. Power take-off (PTO) drive shafts and their guards. Safety AMENDMENT 2 AGE/6 Also incorporates Amendment 1 BS EN :2004+A1:2009 Cranes. General design. General principles and requirements members, non-members MHE/3 Also incorporates Corrigenda 1 & 2 BS EN 13034:2005+A1:2009 Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) PH/3/3 BS EN 13418:2004+A1:2008 Plastics and rubber machines. Winding machines for film or sheet. Safety requirements members, non-members MCE/3/2 BS EN :2002+A1:2009 Respiratory therapy equipment. Tubing and connectors CH/121/5 BS EN :2001+A1:2009 Respiratory therapy equipment. Air entrainment devices CH/121/5 BS EN 14279:2004+A1:2009 Laminated veneer lumber (LVL). Definitions, classification and specifications B/541 BS EN 14605:2005+A1:2009 Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) PH/3/3 BS EN 14910:2007+A1:2009 Garden equipment. Walk-behind combustion engine powered trimmers. Safety members, non-members AGE/20 BS EN 15056:2006+A1:2009 Cranes. Requirements for container handling spreaders MHE/3 BS EN :2001+A1:2010 Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz. General requirements, frequency bands and electromagnetic disturbances PEL/205 Update Standards May 2010 Prices may be subject to change. 21

22 Updated British Standards continued... BS EN :2003+A2:2007 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers members, non-members CPL/61/3 Also incorporates Amendments 2 & 11 and Corrigenda 1 BS EN 60630:1998+A6:2009 Maximum lamp outlines for incandescent lamps AMENDMENT members, non-members CPL/34/1 Also incorporates Amendments 1, 2, 3, 4 & 5 BS EN :1997+A2:2008 Automatic electrical controls for household and similar use. Particular requirements for electric actuators AMENDMENT 2 CPL/72 Also incorporates Amendments 1 & 11 BS EN 60809:1996+A4:2009 (IEC 809:1995) Lamps for road vehicles. Dimensional, electrical and luminous requirements AMENDMENT members, non-members CPL/34/1 Also incorporates Amendments 1, 2 & 3 BS EN :2002+A1:2008 Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test members, non-members EPL/66 BS EN :2001+A1:2008 Lamp controlgear. General and safety requirements members, non-members CPL/34/3 Also incorporates Corrigenda 1 NA to BS EN :2007+A1:2010 UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules B/525/9 To order visit BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS EN 597-1:1995 Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: smouldering cigarette FW/6 BS EN 597-2:1995 Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: match flame equivalent FW/6 BS EN 1022:2005 Domestic furniture. Seating. Determination of stability FW/0 BS EN :1997 Office furniture. Screens. Dimensions FW/0 BS EN :2000 Office furniture. Screens. Mechanical safety requirements FW/0 BS EN :2000 Office furniture. Screens. Test methods FW/0 BS EN :1995 Furniture. Foldaway beds. Safety requirements and testing. Safety requirements FW/0/2 BS EN :1995 Furniture. Foldaway beds. Safety requirements and testing. Test methods FW/0/2 BS EN :1997 Furniture. Cribs and cradles for domestic use. Safety requirements CW/1/5 BS EN :1996 Furniture. Cribs and cradles for domestic use. Test methods CW/1/5 BS EN 1334:1996 Domestic furniture. Beds and mattresses. Methods of measurement and recommended tolerances FW/0/2 BS EN 1725:1998 Domestic furniture. Beds and mattresses. Safety requirements and test methods FW/0/2 BS EN 12727:2000 Furniture. Ranked seating. Test methods and requirements for strength and durability FW/0 BS EN 14884:2005 Air quality. Stationary source emissions. Determination of total mercury: automated measuring systems EH/2/1 DD CEN/TS 15674:2007 Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods EH/2/1 DD CEN/TS 15675:2007 Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements EH/2/1 BS ISO :2006 Plain bearings. Wrapped bushes. Dimensions MCE/12 BS ISO :2006 Plain bearings. Wrapped bushes. Test data for outside and inside diameters MCE/12 BS ISO :2006 Plain bearings. Wrapped bushes. Lubrication holes, grooves and indentations MCE/12 BS ISO :2006 Plain bearings. Wrapped bushes. Materials MCE/12 BS ISO :2006 Graphic technology and photography. Colour characterization of digital still cameras (DSCs). Stimuli, metrology, and test procedures CPW/42 22 Prices may be subject to change. Update Standards May 2010

23 BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 June, BS 3455:1973 Glossary of terms used in nuclear science and technology NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BS 3664:1963 Specification for film badges for personnel radiation monitoring NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BS 3775:1964 Specification for counting trays (planchets) for radioactive assay NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BS 3890:1965 General recommendations for the testing, calibration and processing of radiation monitoring films NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BS :1981 Surface materials for use in radioactive areas. Methods of measuring and evaluating the decontamination factor NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BS :1982 Surface materials for use in radioactive areas. Guide to the selection of materials NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BS 5288:1976 Specification. Sealed radioactive sources NCE/2 This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 June, Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date. BS EN :1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Solar radiation This standard has been proposed for withdrawal as the European Standard has been proposed for withdrawal by CENELEC BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 611-2:1990 Petri dishes. Specification for plastics Petri dishes for single use LBI/36 Superseded by BS EN ISO 24998:2008 BS :1985 Photographic density measurements. Guide for terms, symbols and notations CPW/42 Superseded by BS ISO 5-1:2009 BS :2001 Photographic density measurements. Geometric conditions for transmission density CPW/42 Superseded by BS ISO 5-2:2009 BS 3385:1973 Specification for direct reading pocket type electroscope exposure meters NCE/2 This standard has been withdrawn as it is no longer used by the industry BS 3510:1968 Specification for a basic symbol to denote the actual or potential presence of ionizing radiation NCE/2 This standard has been withdrawn as it is superseded by ISO 361:1975 which was never adopted as a British Standard BS 4248:2004 Supersulfated cement B/516/6 Superseded by BS EN 15743:2010 BS :1982 Sampling of spices and condiments. Method for preparation of a ground sample for analysis AW/7 Superseded by BS EN ISO 2825:2010 BS :1991 Guide to user s requirements for technical manuals (based on the principles of BS 4884). Content DS/1 This standard has been withdrawn as it conflicts with BS EN 62079:2001 BS :1992 Guide to user s requirements for technical manuals (based on the principles of BS 4884). Presentation DS/1 This standard has been withdrawn as it conflicts with BS EN 62079:2001 BS :1989 Transportable gas containers. Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams PVE/3/3 Superseded by BS EN :2003+A1:2006 BS :1990+A1:2010 Structural use of steelwork in building. Design in composite construction. Code of practice for design of simple and continuous composite beams B/525/4 Superseded by BS EN :2004 BS :1985 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method ISE/102 Superseded by BS EN ISO 4945:2009 BS :1982 Fixed capacitors for use in electronic equipment. Methods of test Superseded by BS EN :2009 BS :1998 Testing earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems B/513/1 Superseded by BS ISO 10265:2008 Update Standards May 2010 Prices may be subject to change. 23

24 British Standards Withdrawn continued... BS :1995 Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Internal electro-optical distanceranging method PTI/12 Superseded by BS ISO :2010 BS :1994 Rotary shaft lip type seals. Storage, handling and installation MCE/11 Superseded by BS ISO :2009 BS 7839:1995 Solid hardmetal end-mills with parallel shanks. Dimensions MTE/18 Superseded by BS ISO 10911:2010 BS EN 550:1994 Sterilization of medical devices. Validation and routine control of ethylene oxide sterilization CH/198 Superseded by BS EN ISO :2007 BS EN 632:1996 Agricultural machinery. Combine harvesters and forage harvesters. Safety AGE/32 Superseded by BS EN ISO :2009 BS EN 980:2003 Graphical symbols for use in the labelling of medical devices CH/210/3 Superseded by BS EN 980:2008 BS EN 1713:1998 Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds WEE/46 Superseded by BS EN ISO 23279:2010 BS EN ISO 9445:2006 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form ISE/105 Superseded by BS EN ISO :2010 and BS EN ISO :2010 BS EN 12062:1998 Non-destructive examination of welds. General rules for metallic materials WEE/46 Superseded by BS EN ISO 17635:2010 BS EN 13689:2002 Guidance on the classification and design of plastics piping systems used for renovation PRI/88/3 Superseded by BS EN ISO 11295:2010 BS EN :2003 (BS :2003) Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen. Coaxial cylinders method PTI/13 Superseded by the dual numbered standard BS EN 13302:2010, BS :2010 BS EN 14896:2006 (BS :2006) Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spindle viscometer method PTI/13 Superseded by the dual numbered standard BS EN 13302:2010, BS :2010 DD CEN/TS 14961:2005 Solid biofuels. Fuel specifications and classes PTI/17 Superseded by BS EN :2010 DD CEN ISO/TS 17234:2003 Leather. Chemical tests. Determination of certain azo colourants in dyed leathers TCI/69 Superseded by BS EN ISO :2010 BS EN 23908:1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method ISE/65 Superseded by BS EN ISO 3908:2009 BS EN 25821:1992 Resistance spot welding electrode caps WEE/29 Superseded by BS EN ISO 5821:2009 BS CECC 30801:1993 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Tantalum surface mounting capacitors Superseded by BS EN :2006 BS EN 50015:1998 Electrical apparatus for potentially explosive atmospheres. Oil immersion o GEL/31/17 Superseded by BS EN :2007 DD CLC/TS :2006 Alarm systems. Intrusion and hold-up systems. Warning devices GW/1/1 Superseded by BS EN :2009 BS EN :1998 Electroacoustics. Simulators of human head and ear. An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range EPL/29 Superseded by BS EN :2009 BS EN :2007 Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners CPL/116 Superseded by BS EN :2009 BS EN :1997 Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for IT systems PEL/85 Superseded by BS EN :2007 BS QC :1983 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Generic specification Superseded by BS EN :2009 BS QC :1991 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil D.C.. capacitors Superseded by BS EN :2009 BS QC :1993 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed capacitors for use in electronic equipment. Aluminium electrolytic capacitors with non-solid electrolyte. Assessment level E Superseded by BS EN :2007 BS QC :1983 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polyethylene terephthalate film dielectric D.C. capacitors Superseded by BS EN :2005 BS QC :1984 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polyethylene terephthalate film dielectric D.C. capacitors. Assessment level E Superseded by BS EN :2005 BS QC :1991 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 1 Superseded by BS EN : Prices may be subject to change. Update Standards May 2010

25 BS QC :1993 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level E Superseded by BS EN :2005 BS QC :1992 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 2 Superseded by BS EN :2005 BS QC :1993 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. Assessment level E Superseded by BS EN :2005 BS QC :1993 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed tantalum chip capacitors. Assessment level E Superseded by BS EN :2006 BS QC :1983 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polypropylene film dielectric d.c. capacitors Superseded by BS EN :2005 BS QC :1984 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polypropylene film dielectric d.c. capacitors. Assessment level E Superseded by BS EN :2005 BS QC :1991 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed polypropylene film dielectric metal foil d.c. capacitors Superseded by BS EN :2006 BS QC :1992 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed multilayer ceramic chip capacitors Superseded by BS EN :2004, BS EN :2004, BS EN :2004 and BS EN :2004 BS QC :1992 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed multilayer ceramic chip capacitors. Assessment level E Superseded by BS EN :2004, BS EN :2004, BS EN :2004 and BS EN :2004 BS QC :1992 Harmonized system of quality assessment for electronic components. Varistors for use in electronic equipment: generic specification Superseded by BS EN :2008 BS ISO 6580:2005 (BS 6339:2005) General-purpose industrial fans. Circular flanges. Dimensions MCE/17 Superseded by BS EN ISO 13351:2009 BS ISO :2000 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements without the influence of sample treatment NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2000 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements with the influence of sample treatment NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2000 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2001 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and applications to counting measurements on filters during accumulation of radioactive material NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and applications to measurements by use of transient mode NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and general applications NCE/2 Superseded by BS ISO 11929:2010 BS ISO :2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment NCE/2 Superseded by BS ISO 11929:2010 BS ISO/IEC :2004 Information technology. Security techniques. Management of information and communications technology security. Concepts and models for information and communications technology security management IST/33 This standard has been withdrawn. A call for contributions was issued by the ISO/IEC JTC 1/SC 27 Secretariat to National Bodies to the periodic prereview of ISO/IEC :2004. It was unanimously agreed that the standard should be withdrawn as the material contained in ISO/IEC 27000:2009 and ISO/IEC 27005:2008 have made ISO/IEC :2004 redundant BS ISO/TR 14696:1999 Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL) FSH/21 This standard has been withdrawn as it is superseded by ISO 14696:2009 which will not be implemented as a British Standard BS IEC :1993 Electrical apparatus for explosive gas atmospheres. Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives) GEL/31/11 Superseded by BS EN :2007 BS IEC :1997 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC EPL/66 This standard has been withdrawn as the International Standard has been withdrawn by IEC DD IEC/TS :2009 Communication networks and systems for power utility automation. Guideline to exchanging information from a CDC-based data model using IEC or IEC PEL/57 Superseded by DD CLC/TS :2010 Update Standards May 2010 Prices may be subject to change. 25

26 British Standards Withdrawn continued... BS AU b:1996 Tyres and wheels. Tyres. Car tyres. Method of test for verifying tyre capabilities AUE/4 Superseded by BS ISO 10191:2010 BS AU a:1992 Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for classification codes and nomenclature for ply rating marked series tyres AUE/4 Superseded by BS ISO :2010 BS AU 175-2b:1983 Vehicle identification numbers (VIN). Specification for world manufacturer identifier (WMI) codes AUE/15 Superseded by BS ISO 3780:2009 BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to by 30 June, 2010, in order to be considered by the relevant UK Committee. BS EN 1236:1995 Fertilizers. Determination of bulk density (loose) CII/37 BS EN 1237:1995 Fertilizers. Determination of bulk density (tapped) CII/37 BS EN ISO 7837:2001 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers CII/37 BS EN 12878:2005 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test STI/1 BS EN 13366:2001 Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients CII/37 BS EN :2001 Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA CII/37 BS EN :2005 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test STI/1 BS EN 14787:2005 Fertilizers and liming materials. Determination of water content. Guidelines and recommendations CII/37 BS EN 14888:2005 Fertilizers and liming materials. Determination of cadmium content CII/37 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation BS EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 644:2009/Amendment 1 Timber windows. Fully finished factoryassembled windows of various types. Specification B/538/1 BS XXXX Water consumption in buildings. Code of practice B/504 BS 2869 (Revision) Fuel oils for agricultural, domestic and industrial engines and boilers. Specification will supersede BS 2869:2006 PTI/2 BS 6164 (Revision) Code of practice for safety in tunnelling in the construction industry will supersede BS 6164:2001 B/513 BS 6259 (Revision) Code of practice for the design, planning, installation, testing and maintenance of sound systems will supersede BS 6259:1997 EPL/100 BS 6896 (Revision) Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases) will supersede BS 6896:2005 GSE/30 BS :1998/Amendment 1 Coatings on metal fasteners. Specification for hot dipped galvanized coatings FME/9/1 BS 8020 (Revision) Tools for live working. Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V A.C. or 1500 V D.C. will supersede BS 8020:2002 PEL/78 BS :2008/Amendment 1 Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice B/507/6 BS Building modelling shapes and symbols library. Recommended 2D symbols and shape representations of building and engineering elements for use in building information modelling software B/555 BS 8544 Guide on life cycle costing during the in-use phase B/500/3 BS 8877 Online recruitment services. Code of practice SVS/9 BS 8909 Specification for a sustainability management system for film SDS/1/7 BS EN 3-8 (Revision) Portable fire extinguishers. Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar will supersede BS EN 3-8:2006 FSH/2 BS EN :2008/Amendment 2 Domestic cooking appliances burning gas. Safety. General GSE/35 BS EN WI Non-domestic storage furniture. Test methods for the determination of strength, durability and stability FW/0/4 BS EN WI JW Energy audits. General SEM/1/1 BS EN 593:2009/Amendment 1 Industrial valves. Metallic butterfly valves PSE/18/3 BS EN 716-1:2008/Amendment 1 Furniture. Children s cots and folding cots for domestic use. Safety requirements CW/1/5 BS EN 716-2:2008/Amendment 1 Furniture. Children s cots and folding cots for domestic use. Test methods CW/1/5 26 Prices may be subject to change. Update Standards May 2010

27 BS EN 836:1997/Amendment 4 Garden equipment. Powered lawnmowers. Safety AGE/20 BS EN 958:2006/Amendment 1 Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods SW/136/5 BS EN (Revision) Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear (micro-deval) will supersede BS EN :1996 B/502/6 BS EN (Revision) Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption will supersede BS EN :2000 B/502/6 BS EN 1110 (Revision) Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature will supersede BS EN 1110:2000 B/546/1 BS EN (Revision) Tests for thermal and weathering properties of aggregates. Determination of resistance to thermal shock will supersede BS EN :2002 B/502/6 BS EN 1370 (Revision) Founding. Surface roughness inspection by visual tactile comparators will supersede BS EN 1370:1997 ISE/35 BS EN (Revision) Founding. Liquid penetrant inspection. Sand, gravity die and low pressure die castings will supersede BS EN :1997 ISE/35 BS EN Tests for chemical properties of aggregates. Determination of loss on ignition (LoI) of Municipal Incinerator Bottom Ash (MIBA) B/502/6 BS EN (Revision) Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of sound absorption will supersede BS EN :1998 B/509/6 BS EN (Revision) Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation will supersede BS EN :1998 B/509/6 BS EN Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions B/509/6 BS EN ISO (Revision) Ophthalmic optics. Uncut finished spectacle lenses. Transmittance specifications and test methods will supersede BS EN ISO :2004 CH/172/3 BS EN ISO (Revision) Pipework. Corrugated metal hoses and hose assemblies will supersede BS EN ISO 10380:2003 PSE/12 BS EN (Revision) Smoke and heat control systems. Specification for powered smoke and heat exhaust ventilators will supersede BS EN :2002 FSH/25 BS EN (Revision) Plastic piping systems for water supply. Polyethylene (PE). Valves will supersede BS EN :2001 PRI/88/2 BS EN (Revision) Founding. Ultrasonic examination. Spheroidal graphite cast iron castings will supersede BS EN :2003 ISE/35 BS EN (Revision) Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties will supersede BS EN 12758:2002 B/520/4 BS EN (Revision) Gypsum blocks. Definitions, requirements and test methods will supersede BS EN 12859:2008 B/544/1 BS EN (Revision) Building hardware. Requirements and test methods for windows and doors height windows. Requirements common to all types of hardware will supersede BS EN :2006 B/538 BS EN (Revision) Building hardware, fittings for windows and door height windows. Requirements and test methods. Manoeuvring fittings for espagnolette bolts/sliding button will supersede DD CEN/TS :2004 B/538 BS EN (Revision) LPG equipment and accessories. Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings will supersede BS EN 13175:2003 PVE/19 BS EN (Revision) Common rules for precast concrete products will supersede BS EN 13369:2004+A1:2006 B/524 BS EN (Revision) Non-destructive testing. Ultrasonic thickness measurement will supersede BS EN 14127:2004 WEE/46 BS EN :2006/Amendment 1 Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements RHE/18 BS EN :2007/Amendment 1 Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements RHE/18 BS EN (Revision) Road traffic noise reducing devices. Specifications will supersede BS EN 14388:2005 B/509/6 BS EN Solid biofuels. Fuel specifications and classes. Wood pellets for non-industrial use PTI/17 BS EN Solid biofuels. Fuel specifications and classes. Wood briquettes for non- industrial use PTI/17 BS EN Solid biofuels. Fuel specifications and classes. Wood chips for non-industrial use PTI/17 BS EN Solid biofuels. Fuel specifications and classes. Firewood for non-industrial use PTI/17 BS EN Cranes. Bridge & gantry cranes MHE/3/3 BS EN (Revision) Copper and copper alloys. Determination of tin content. Medium tin content. Flame atomic absorption spectrometry method (FAAS) will supersede DD CEN/TS :2006 NFE/34 BS EN Extended application of results from fire resistance tests. Load bearing masonry walls FSH/22/2 Update Standards May 2010 Prices may be subject to change. 27

28 New Work Started continued... BS EN :2007/Amendment 1 Railway applications. Welding of railway vehicles and components. General RAE/1/-/2 BS EN Mountaineering equipment. Braking devices. Braking devices with assisted locking, safety requirements and test methods SW/136/5 BS EN Mountaineering equipment. Braking devices. Manual braking devices, safety requirements and test methods SW/136/5 BS EN (Revision) LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections will supersede BS EN 15202:2006 PVE/19 BS EN Solid biofuels. Fuel quality assurance. General requirements will supersede DD CEN/TS 15234:2006 PTI/17 BS EN Design and application of plasterboard systems on frames. General principles of design B/544/3 BS EN Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles will supersede DD CEN/TS 15415:2006 PTI/17 BS EN Gas-fired heating boilers. General requirements and tests GSE/29 BS EN Gas-fired heating boilers. Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1000 kw GSE/29 DD CEN/TS Copper and copper alloys. Determination of tellurium content. Low tellurium content. Flame atomic absorption spectrometric method (FAAS) NFE/34 BS EN Paints and varnishes. Leaching of substances from coatings. Laboratory immersion method STI/28 BS EN Fertilizers. Determination of micro-nutrient ions complexed in fertilizers. Identification of lignosulfonates CII/37 PD CEN/TR Characterization of waste. Guidance on the use of ecotoxicity tests applied to waste B/508/3 DD CEN/TS Ambient air quality. Measurement of bioaerosols. Determination of moulds using filter sampling systems and cultivation based analyses EH/2/1 BS EN Copper and copper alloys. Determination of copper content. Electrolytic determination of copper in materials with copper content less than 99, 85% NFE/34 BS EN LPG equipment and accessories. Sealing caps and plugs for cylinder and tank valves. Specification and testing PVE/19 PD CEN ISO/TR (Revision) Footwear. Performance requirements for components for footwear. Heels and top pieces will supersede PD ISO/TR 20573:2006 TCI/69 BS EN :2006/Amendment 1 Cable trunking systems and cable ducting systems for electrical installations. Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings PEL/213 BS EN Safety devices required for the safe functioning of equipment with respect to explosion risks GEL/31 BS EN (Revision) Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers will supersede BS EN :2003+A2:2009 CPL/61/4 BS EN (Revision) Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors will supersede BS EN :2009 EPL/48 BS EN (Revision) Household electrical appliances. Performance. Hard water for testing will supersede BS EN 60734:2003 CPL/59/1 BS EN (Revision) Connectors for optical fibres and cables. Generic specification will supersede BS EN :2007 BS EN (Revision) Connectors for optical fibres and cables. Blank detail specification will supersede BS EN :2007 BS EN (Revision) Industrial systems, installation and equipment and industrial products. Designation of signals will supersede BS EN 61175:2005 GEL/3 BS EN (Revision) Adaptors for fibre optic connectors. Generic specification will supersede BS EN :2008 BS EN (Revision) Adaptors for fibre optic connectors. Blank detail specification will supersede BS EN :2006 BS EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Bending test for cords BS EN (Revision) Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Generic specification will supersede BS EN :2009 BS EN (Revision) Fibre optic fan-outs. Blank detail specification will supersede BS EN :2006 BS EN Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (A CS) will supersede BS EN :2004 PEL/17/3 BS EN Fibre optic interconnecting devices and passive components performance standard. Nonconnectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments BS EN Fibre optic interconnecting devices and passive components performance standard. Nonconnectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments BS EN Fibre optic interconnecting devices and passive components. Reliability. Qualification of passive optical components 28 Prices may be subject to change. Update Standards May 2010

29 BS EN :2006/Amendment 2 High-voltage switchgear and controlgear. Synthetic testing PEL/17/1 BS EN Recurrent test and test after repair and modification of electrical equipment PEL/85 BS EN Alarm systems. Intrusion and hold-up systems. Security fog device/systems GW/1/1 BS EN High frequency inductive components. Fixed surface mount inductors for use in electronic and telecommunication equipment EPL/51 BS EN Maritime navigation and radiocommunication equipment and systems Class B shipborne equipment of the automatic identification system (AIS). Self-organising time division multiple access (SOTDMA) EPL/80 BS EN :2007/Amendment 1 Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2 BS EN :2007/Amendment 1 Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 BS ISO 1652:2004/Amendment 1 Rubber latex. Determination of apparent viscosity by the Brookfield test method PRI/50 BS ISO 3316 Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests MTE/15 BS ISO Full-flow lubricating oil filters for internal combustion engines. Method of test for vibration fatigue will supersede BS :1991 MCE/21/5 BS ISO 5270 (Revision) Pulps. Laboratory sheets. Determination of physical properties will supersede BS EN ISO 5270:2000 PAI/11 BS ISO 5294 Synchronous belt drives. Pulleys MCE/10 BS ISO Wheelchairs. Batteries and chargers for powered wheelchairs. Requirements and test methods CH/173/1 BS ISO Methods for analysis of oilseeds. Check of the calibration of moisture meters will supersede BS :1988 AW/307 BS ISO 8373 (Revision) Manipulating industrial robots. Vocabulary will supersede BS EN ISO 8373:1996 AMT/4 BS ISO (Revision) Pulp, paper and board. Microbiological examination. Total count of bacteria, yeast and mould based on disintegration will supersede BS ISO :2005 PAI/11 BS ISO (Revision) Condition monitoring and diagnostics of machines. Vocabulary will supersede BS ISO 13372:2004 GME/21/7 BS ISO Metallic powders. Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) ISE/65 BS ISO Pen systems. Seals for pen-injectors for medical use CH/212 BS ISO Road vehicles. Unified diagnostic services (UDS). Specification and requirements will supersede BS ISO 14229:2006 AUE/16 BS ISO Road vehicles. Unified diagnostic services (UDS). Session layer services AUE/16 BS ISO Electronic archiving. Specifications concerning the design and the operation of an information system for electronic information preservation IDT/1/3 PD ISO/IEC TR Information technology. Generic cabling. Implementation and operation of customer premises cabling. Identifiers within administration systems TCT/7 BS ISO Refrigerating systems and heat pumps. Qualification of tightness of components and joints RHE/18 BS ISO (Revision) Agricultural irrigation equipment. Graphical symbols for pressurized irrigation systems will supersede BS ISO 15081:2005 AGE/30 BS ISO Standardisation of the injection site of different animal species AGE/6/1 PD ISO/TR Rubber. Measurement of the aromaticity of oil in reclaimed rubbers PRI/23 BS ISO Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters CPW/172/6 BS ISO Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Electronic tacheometers CPW/172/6 BS ISO Water quality. Determination of arsenic. Method using hydride generation atomic fluorescence spectrometry (HG-AFS) EH/3/2 BS ISO Water quality. Determination of arsenic. Method using hydride generation atomic absorption spectrometry (HG-AAS) EH/3/2 BS ISO Water quality. Determination of selenium. Method using hydride generation atomic fluorescence spectrometry (HG-AFS) EH/3/2 BS ISO Water quality. Determination of selenium. Method using hydride generation atomic absorption spectrometry (HG-AAS) EH/3/2 BS ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of density and apparent porosity RPI/13 BS ISO (Revision) Pneumatic fluid power. Assessment of component reliability by testing. General procedures will supersede BS ISO :2007 MCE/18 BS ISO (Revision) Pneumatic fluid power. Assessment of component reliability by testing. Directional control valves will supersede BS ISO :2007 MCE/18 BS ISO (Revision) Pneumatic fluid power. Assessment of component reliability by testing. Cylinders with piston rod will supersede BS ISO :2007 MCE/18 Update Standards May 2010 Prices may be subject to change. 29

30 New Work Started continued... BS ISO (Revision) Financial services. UNIversal Financial industry message scheme. Overall methodology and format specifications for inputs to and outputs from the ISO repository will supersede BS ISO :2004 IST/12 BS ISO (Revision) Financial services. UNIversal Financial Industry message scheme. Roles and responsibilities of the registration bodies will supersede BS ISO :2007 IST/12 BS ISO Financial services. UNIversal Financial Industry message scheme. Modelling IST/12 BS ISO Financial services. UNIversal Financial Industry message scheme. XML Schema Generation IST/12 BS ISO Financial services. UNIversal Financial Industry message scheme. Reverse Engineering IST/12 BS ISO Financial services. UNIversal Financial Industry message scheme. Registration IST/12 BS ISO Financial services. UNIversal Financial Industry message scheme. ASN.1 Generation IST/12 BS ISO :2008/Amendment 1 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Field joint coatings PSE/17/2 BS ISO Societal security. Vocabulary SSM/1 BS ISO Water quality. Determination of antimony. Method using hydride generation atomic fluorescence spectrometry (HG-AFS) EH/3/2 BS ISO Water quality. Determination of antimony. Method using hydride generation atomic absorption spectrometry (HG-AAS) EH/3/2 BS ISO/IEC Information technology. Minimum requirements for specifying document rendering systems. Formatting specifications for document rendering systems IST/41 BS ISO Security management systems for the supply chain. Electronic port clearance (EPC). Message structures SME/32 BS ISO Ship recycling management systems. Information control for hazardous materials in the manufacturing chain of ship building and ship operations SME/32 BS ISO Physiological quantities and their units. Chemistry SS/7 PD Background Paper to the UK National Annex to BS EN B/525 PAS 83 (Revision) Guidance on codes of practice, standardised methods and regulations for cell-based therapeutics will supersede PAS 83:2006 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 30 June, 2010 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 10/ DC BS 8452 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide CPI/30/5 10/ DC BS 8543 Financial services compliance. Framework SVS/6/2 10/ DC BS 2869 Fuel oils for agricultural, domestic and industrial engines and boilers. Specification PTI/2 10/ DC BS 8878 Web accessibility. Code of practice IST/45 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS All Draft British Standards are available from BSI Customer Services (see How to order on page 2) Most drafts are charged at to members and to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 June, 2010 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 10/ DC BS ISO Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres EH/1/2 4 June, / DC BS ISO/IEC AMD3 Information technology. Lossy/lossless coding of bi-level images IST/37 10/ DC BS EN Alarm systems. Alarm transmission systems and equipment. Part 1-7. Requirements for common protocol for alarm transmission using packet switched network GW/1/5 30 August, / DC BS ISO/IEC Information Technology. Biometric performance testing and reporting. Part 5. Grading scheme for access control scenario evaluation IST/44 31 May, Prices may be subject to change. Update Standards May 2010

31 10/ DC BS ISO/IEC Information technology. Radio frequency identification (RFID) for item management. Application protocol. Encoding and processing rules for sensors and batteries IST/34 10/ DC BS EN ISO Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identification. Part 1. Product identification and electronic catalogue product hierarchy CH/172/3 10/ DC BS ISO Glass in building. Curved glass. Part 1. Terminology and definitions B/520/1 28 July, / DC BS ISO Glass in building. Curved glass. Part 2. Quality requirements B/520/1 28 July, / DC BS ISO Water quality. Determination of measurement uncertainty based on validation data EH/3/2 10/ DC BS ISO/IEC Biometric application programming interface. Part 4. Biometric sensor function provider interface IST/44 31 May, / DC BS EN AMD1 Safety of industrial trucks. Electrical requirements. Part 1. General requirements for battery powered trucks MHE/7 10/ DC BS EN AMD1 Safety of industrial trucks. Electrical requirements. Part 2. General requirements of internal combustion engine powered trucks MHE/7 10/ DC BS EN AMD1 Safety of industrial trucks. Electrical requirements. Part 3. Specific requirements for the electric power transmission systems of internal combustion engine powered trucks MHE/7 10/ DC BS EN ISO AMD1 Geographic information. Data product specifications IST/36 10/ DC BS EN ISO Dentistry. Root-canal instruments. Part 5. Shaping and cleaning instruments CH/106/4 10/ DC BS EN ISO Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys WEE/46 10/ DC BS ISO Security management systems for the supply chain. Electronic port clearance (EPC). Part 2. Core data elements SME/32 10/ DC BS ISO Equipment for crop protection. Knapsack motorized sprayers. Test methods and performance limits AGE/15 10/ DC BS EN ISO 9092 Textiles. Nonwoven. Definition TCI/24 10/ DC BS ISO Food irradiation. Requirements for the development, validation and routine control of the ionizing radiation process used for the treatment of food AW/90 25 July, / DC BS ISO Agricultural tractors. Requirements for braking AGE/6 31 July, / DC BS EN Fire hazard testing. Part 7-1. Toxicity of fire effluent. General guidance GEL/89 10/ DC BS ISO Hot formed helical compression springs. Technical specifications FME/9/3 10/ DC BS ISO Statistics. Vocabulary and symbols. Part 3. Design of experiments SS/1 10/ DC BS ISO Surface chemical analysis. Secondary ion mass spectrometry. Method for depth profiling of arsenic in silicon CII/60 10/ DC BS ISO Surface chemical analysis. Data transfer format for scanning-probe microscopy CII/60 10/ DC BS ISO Technical drawings. Indication of dimensions and tolerances. Part 1. General principles TDW/4 10/ DC BS ISO Condition monitoring and diagnostics of machines. General guidelines GME/21/7 19 July, / DC BS ISO Round and sawn timber. Vocabulary B/543 10/ DC BS ISO Paper and board. Determination of compressive strength. Ring crush method PAI/11 10/ DC BS EN ISO Leather. Determination of water resistance of flexible leather. Part 1. Repeated linear compression (penetrometer) TCI/69 10/ DC BS EN Radiation protection instrumentation. Radon and radon decay product measuring instruments. Part 3. Specific requirements on radon decay product measuring instruments NCE/2 10/ DC BS ISO/IEC Information technology. Multimedia application format (MPEG-A). Part 5. Media streaming application format members, non-members IST/37 10/ DC BS EN Mechanical structures for electronic equipment. Part 107. Dimensions of subracks and plug-in units, micro format EPL/48 4 June, / DC BS ISO 2954 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity GME/21/2 25 June, / DC BS ISO 776 Pulps. Determination of acidinsoluble ash PAI/11 10/ DC BS EN Thermal insulation for buildings. Reflective insulation products. Determination of the declared thermal performance B/540/9 28 July, 2010 Update Standards May 2010 Prices may be subject to change. 31

32 Draft British Standards for Public Comment continued... 10/ DC BS ISO/IEC Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Part 6. Iris image data IST/44 31 May, / DC BS ISO/IEC Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Part 8. Finger pattern skeletal data IST/44 31 May, / DC BS ISO/IEC AMD1 Information technology. JPEG 2000 image coding system. Part 11. Wireless IST/37 10/ DC BS ISO Imaging materials. Colour reflection prints. Test method for ozone gas fading stability CPW/42 10/ DC BS ISO Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets FSH/21/7 1 July, / DC BS ISO Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming ISE/109 10/ DC BS ISO Indoor air. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID EH/2/3 31 July, / DC BS EN ISO/IEC Information technology. Automatic identification and data capture techniques. Bar code symbol print quality test specification. Two-dimensional symbols IST/34 10/ DC BS ISO Textile machinery and accessories. Bars for drop wires for electrical warp stop motions TCI/33 10/ DC BS ISO Control charts. Cumulative sum charts SS/4 10/ DC BS ISO Road vehicles. H-point machine (HPM II). Specifications and procedure for H-point determination AUE/12 10/ DC BS EN Connectors for electronic equipment. Product requirements. Part Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function EPL/48 14 May, / DC BS EN Semiconductor devices. Micro electromechanical devices. Part 10. Micro-pillar compression test for MEMS materials EPL/47 14 May, / DC BS EN Semiconductor devices. Microelectromechanical devices. Part 11. Test method for linear thermal expansion coefficients of MEMS materials EPL/47 14 May, / DC BS EN AMD2 Gas meters. Conversion devices. Part 1. Volume conversion GSE/25 10/ DC BS ISO/IEC AMD3 Information technology. JPEG 2000 image coding system. Part 1. Core coding system IST/37 10/ DC BS EN Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method EH/6 14 June, / DC BS EN Road transport and traffic telematics. ESafety. ECall minimum set of data EPL/278 10/ DC BS EN Intelligent transport systems. ESafety. ECall high level application requirements (HLAP) EPL/278 10/ DC BS ISO Dentistry. Manual toothbrushes. General requirements and test methods CH/106/7 10/ DC BS EN Intelligent transport systems. ESafety. Pan European ecall-operating requirements EPL/278 10/ DC BS EN ISO Pumps. Shaft-sealing systems for centrifugal and rotary pumps members, non-members MCE/6 10/ DC BS ISO Liquid pumps and installation. General terms. Definitions, quantities, letter symbols and units. Part 2. Pumping system MCE/6 10/ DC BS ISO 3898 Bases for design of structures. Names and symbols of physical quantities. Generic quantities B/525/1 15 June, / DC BS ISO Liquid pumps and installation. General terms. Definitions, quantities, letter symbols and units. Part 1. Liquid pumps MCE/6 10/ DC BS EN 1534 Wood flooring. Determination of resistance to indentation (Brinell). Test method B/543 10/ DC BS EN Protection profile for secure signature creation device. Part 2. Device with key generation IST/17 10/ DC BS EN Bituminous mixtures. Material specifications. Part 9. Bituminous mixture for Ultra-thin layer Asphalt Concrete (UTLAC) B/510/1 10/ DC BS EN Aircraft ground support equipment. General requirements. Part 1. Basic safety requirements ACE/57 10/ DC BS EN Aircraft ground support equipment. Specific requirements. Part 1. Passenger stairs ACE/57 10/ DC BS EN Aircraft ground support equipment. Specific requirements. Part 9. Container/pallet loaders ACE/57 10/ DC BS EN Solid biofuels. Terminology, definitions and descriptions PTI/17 31 July, Prices may be subject to change. Update Standards May 2010

33 10/ DC BS EN 690 Agricultural machinery. Manure spreaders. Safety AGE/32 31 July, / DC BS EN 997 WC pans and WC suites with integral trap B/503 10/ DC BS EN AMD1 Chimneys. Design, installation and commissioning of chimneys. Part 1. Chimneys for non-roomsealed heating appliances B/506/1 28 May, / DC BS EN AMD1 Cycles. Electrically power assisted cycles. EPAC Bicycles GME/25 10/ DC BS EN ISO Leather. Determination of water resistance of flexible leather. Part 2. Repeated angular compression (Maeser) TCI/69 10/ DC BS EN Miniature fuses. Part 7. Miniature fuse-links for special applications PEL/32 10/ DC BS EN AMD1 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Part 1. Specifications for pipes, fittings and the system PRI/88/1 10/ DC BS EN Geosynthetics. General tests for evaluation following durability testing B/ June, / DC BS EN Solid biofuels. Methods for the determination of mechanical durability of pellets and briquettes. Briquettes PTI/17 31 July, / DC BS EN Specifications for particular types of winding wires. Part 0-8. General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire GEL/55 4 June, / DC BS EN Characterization of waste. Terminology. Part 2. Management related terms and definitions B/508/3 10/ DC BS EN ISO Petroleum and natural gas industries. Cements and materials for well cementing. Part 2. Testing of well cements members, non-members PSE/17/-/3 10/ DC BS EN Safety requirements for electrical equipment for measurement, control, and laboratory use. Part Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement EPL/66 11 May, / DC BS EN AMD Cable trunking systems and cable ducting systems for electrical installations. Part 2-1. Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings PEL/213 10/ DC BS EN Low-voltage surge protective devices. Surge protective devices for specific application including D.C. Part 11. Requirements and tests for SPDs in photovoltaic applications PEL/37/1 10/ DC BS EN Photovoltaic devices. Part 5. Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method GEL/82 10/ DC BS EN Alarm systems. CCTV surveillance systems for use in security applications. Part 5-3. Video transmission. Analogue and digital video transmission GW/1/10 27 August, / DC BS EN Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors. Part 1-1. Blank detail specification 14 May, / DC BS EN Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors. Part 1. Generic specification 14 May, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Part 1-1. Blank detail specification 14 May, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic fanouts. Part 1. Generic specification 14 May, / DC BS EN Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Part 1. Generic specification 14 May, / DC BS EN Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Part 1-1. Blank detail specification 14 May, / DC BS EN High-voltage switchgear and controlgear. Part 105. Alternating switch-fuse combinations PEL/17/1 21 May, / DC BS EN Connectors for electronic equipment. Part 7-1. Detail specification for 8- way, shielded, free and fixed connectors EPL/48 10/ DC BS EN AMD1 Automatic electrical controls for household and similar use. Part 2-9. Particular requirements for temperature sensing controls CPL/72 10/ DC BS EN AMD1 Hand-held motoroperated electric tools. Safety. Part 1. General requirements CPL/116 10/ DC BS EN AMD1 Safety of transportable motor-operated electric tools. Part 1. General requirements CPL/116 10/ DC BS ISO 1652 AMD1 Rubber latex. Determination of apparent viscosity by the Brookfield test method PRI/50 Update Standards May 2010 Prices may be subject to change. 33

34 Draft British Standards for Public Comment continued... 10/ DC BS ISO/IEC Information technology. Interoperability with Assistive Technology (AT). Part 1. Requirements and recommendations for interoperability ICT/-/6 10/ DC BS ISO/IEC Software and systems engineering. Information technology project performance benchmarking framework. Part 1. Concepts and definitions IST/15 10 June, / DC BS EN General purpose lead-acid batteries (valve regulated types). Part 1. General requirements, functional characteristics. Methods of test PEL/21 28 May, / DC BS EN General purpose lead-acid batteries (valve-regulated types). Part 2. Dimensions, terminals and marking PEL/21 28 May, / DC BS EN Transportable gas cylinders. Gas cylinder identification (excluding LPG). Part 3. Colour coding PVE/3/7 10/ DC BS ISO 817 Refrigerants. Designation and safety classification RHE/18 10/ DC BS EN ISO AMD1 Multilayer piping systems for hot and cold water installations inside buildings. Part 2. Pipes PRI/88/2 10/ DC BS EN AMD1 Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05. 0,1. 0, 25. 0, / DC BS EN AMD1 Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2 To order visit DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: ISO/DIS Rolling bearings. Linear motion rolling bearings, profiled rail guides. Boundary dimensions and tolerances for series 1, 2 and 3 ISO/DIS Rolling bearings. Linear motion rolling bearings, profiled rail guides. Boundary dimensions and tolerances for series 4 and 5 These standards have been circulated as DIS for the second time. The drafts are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com MCE/7 pren ISO General principles of testing pren ISO Ternary fibre mixtures pren ISO Mixtures of acetate and certain other fibres (method using acetone) pren ISO Mixtures of certain protein and certain other fibres (method using hypochlorite) pren ISO Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) pren ISO Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) pren ISO Mixtures of polyamide and certain other fibres (method using formic acid) pren ISO Mixtures of acetate and triacetate fibres (method using acetone) pren ISO Mixtures of acetate and triacetate fibres (method using benzyl alcohol) pren ISO Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) pren ISO Mixtures of cellulose and polyester fibres (method using sulfuric acid) pren ISO Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) pren ISO Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) pren ISO Mixtures of acetate and certain chlorofibres (method using acetic acid) pren ISO Mixtures of jute and certain animal fibres (method by determining nitrogen content) pren ISO Mixtures of polypropylene fibres and certain other fibres (method using xylene) pren ISO Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) pren ISO Mixtures of silk and wool or hair (method using sulfuric acid) pren ISO Mixtures of cellulose fibres and asbestos (method by heating) pren ISO Mixtures of elastane and certain other fibres (method using dimethylacetamide) pren ISO Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The above standards have been issued under the UAP procedure. Copies are available from the Programme Manager (below). Any comments should be submitted no later than 28 July, Contact: Eddie Levio eddie.levio@bsigroup.com TCI/80 pren Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. Technical specification Please note the above document has been issued for Formal Vote. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/12 34 Prices may be subject to change. Update Standards May 2010

35 pren 14516:2006/Amendment 1 Baths for domestic purposes pren 14527:2006/Amendment 1 Shower trays for domestic purposes These documents are being circulated at CEN UAP stage. The drafts are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com B/503 CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: pren ISO 4063 (ISO 4063:2009) Welding and allied processes. Nomenclature of processes and reference numbers This document, which will not be issued as a Draft for Public Comment, is identical to the corrected version of ISO 4063:2009. It has been circulated to CEN members for voting. Contact: Sarah Meagher sarah.meagher@bsigroup.com WEE/1 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 54-23:2010 Fire detection and fire alarm systems. Fire alarm devices. Visual alarm devices FSH/12/5 EN 115-1:2008+A1:2010 Safety of escalators and moving walks. Construction and installation MHE/4 EN 196-8:2010 Methods of testing cement. Heat of hydration. Solution method B/516/12 EN 196-9:2010 Methods of testing cement. Heat of hydration. Semiadiabatic method B/516/12 EN 206-9:2010 Concrete. Additional rules for Self-compacting Concrete (SCC) B/517/1 EN 384:2010 Structural timber. Determination of characteristic values of mechanical properties and density B/518 EN 534:2006+A1:2010 Corrugated bitumen sheets. Product specification and test methods B/542/6 EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption. Installation B/504/2 EN :2010 Advanced technical ceramics. Methods of test for ceramic coatings. Reciprocating wear test RPI/13 EN :2010 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of wear rate by the pin-on-disk method RPI/13 EN :2010 Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation B/502 EN 1276:2009 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1) CH/216 EN :2009 Tests for thermal and weathering properties of aggregates. Magnesium sulfate test B/502/6 EN 1374:2000+A1:2010 Agricultural machinery. Silos stationary unloaders for round silos. Safety AGE/6 EN : Fire extinguishing media. Foam concentrates. Specification for medium expansion foam concentrates for surface application to waterimmiscible liquids :March 2010 to EN :2008 FSH/18/3 EN : Fire extinguishing media. Foam concentrates. Specification for high expansion foam concentrates for surface application to waterimmiscible liquids :March 2010 to EN :2008 FSH/18/3 EN : Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to waterimmiscible liquids :March 2010 to EN :2008 FSH/18/3 EN : Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to watermiscible liquids :March 2010 to EN :2008 FSH/18/3 EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing FSH/17/9 EN 1912:2004+A4:2010 Structural timber. Strength classes. Assignment of visual grades and species B/518 EN : Eurocode 8. Design of structures for earthquake resistance. Bridges :February 2010 to EN :2005 B/525/8 EN : Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings :March 2010 to EN :2005 B/525/8 EN :2010 code 388. Product standard EN :2010 code 682. Product standard EN :2010 code 683. Product standard EN :2010 code 685. Product standard Update Standards May 2010 Prices may be subject to change. 35

36 CEN European Standards continued... EN :2010 code 713. Product standard EN :2010 code 714. Product standard EN :2010 code 715. Product standard EN :2010 code 718. Product standard EN :2010 code 718 NPC. Product standard EN :2010 code 757. Product standard EN :2010 code Product standard EN 2241:2010 Aerospace series. Lamp caps. Dimensions EN 2852:2010 Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification: 1100 MPa/650ºC ACE/12 EN :2010 Aerospace series. Macrostructure of titanium and titanium alloy wrought products. General requirements 1/-/49 EN 3529:2010 Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm MPa Rm 2000 MPa 1/-/15 EN 4619:2010 Aerospace series. Inserts, MJ threads, selflocking, with self-broaching keys. Installation and removal procedure ACE/12 EN 4620:2010 Aerospace series. Inserts, MJ threads, selflocking, with self broaching keys. Design standard ACE/12 EN 4621:2010 Aerospace series. Inserts, MJ threads, selflocking, with self-broaching keys. Technical specification ACE/12 EN :2010 Aerospace series. Weldability and brazeability of materials in aerospace constructions. Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels 1 EN 12254:2010 Screens for laser working places. Safety requirements and testing PH/2 EN 12371:2010 Natural stone test methods. Determination of frost resistance B/545 EN 12417: Machine tools. Safety. Machining centres :March 2010 to EN 12417:2001+A2:2009 MTE/1/1 EN 12520:2010 Furniture. Strength, durability and safety. Requirements for domestic seating FW/0/2 EN 12525:2000+A2:2010 Agricultural machinery. Front loaders. Safety AGE/6 EN :2010 Railway applications. Structural requirements of railway vehicle bodies. Freight wagons RAE/1/-/2 EN 12871:2010 Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs B/541 EN 13020:2004+A1:2010 Road surface treatment machines. Safety requirements B/513 EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3 MCE/3/9 EN :2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Washing installations MCE/3/13 EN :2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Drilling machines MCE/3/13 EN :2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Presses MCE/3/13 EN 13060:2004+A2:2010 Small steam sterilizers LBI/35 EN : Stationary waste containers up to 5000 l, top lifted and bottom emptied. General requirements :March 2010 to EN :2008 B/508/1 EN : Stationary waste containers up to 5000 l, top lifted and bottom emptied. Additional requirements for underground or partly underground systems :March 2010 to EN :2008 B/508/1 EN 13128: Safety of machine tools. Milling machines (including boring machines) :March 2010 to EN 13128:2001+A2:2009 MTE/1/1 EN 13128:2001+A2:2009 Safety of machine tools. Milling machines (including boring machines) MTE/1/1 EN :2010 Coil coated metals. Test methods. Resistance to salt spray (fog) STI/27 EN :2010 Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation STI/27 EN :2010 Coil coated metals. Test methods. Evaluation of outdoor exposed panels STI/27 EN :2010 Coil coated metals. Test methods. Colour difference. Visual comparison STI/27 EN :2010 Coil coated metals. Test methods. Resistance to environmental soiling (dirt pick-up and striping) STI/27 EN 13747:2005+A2:2010 Precast concrete products. Floor plates for floor systems B/ Prices may be subject to change. Update Standards May 2010

37 New Eurocodes Managed Collection British Standards Online - delivering information direct to your desktop The full set of Eurocodes, UK National Annexes and related documents cost over BSOL offers access to all of them for only 1950 for BSI members.* Tender for European projects Win new contracts Use the new Eurocodes *Eurocodes Managed Collection This new managed collection contains all current Eurocodes, UK National Annexes and related documents. As a managed collection this will be updated weekly. Introductory price: VAT, Introductory member price: VAT For information about the Eurocodes Managed Collection or for an account manager visit, BSOLHelp@bsigroup.com For your 2 Week FREE Trial Go to and complete the web form. Call us on +44 (0) and talk to a BSI representative. your details to BSOLHelp@bsigroup.com To find out more and subscribe visit BSOL provides: 24/7 instant unlimited online access throughout your organization (subject to conditions) First glance at what is proposed with access to draft standards Dynamic daily updates My Notifications alert service. To subscribe please visit or contact BSI Customer Services quoting marketing reference code BSOLE-U Tel +44 (0) Fax +44 (0) BSOLinfo@bsigroup.com raising standards worldwide

38 CEN European Standards continued... EN 13886:2005+A1:2010 Food processing machinery. Cooking kettles equipped with powered stirrer and/or mixer. Safety and hygiene requirements MCE/3/5 EN :2006+A1:2010 Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics B/538 EN :2010 Fertilizers and liming materials. Determination of carbon dioxide. Method for solid fertilizers CII/37 EN : Cranes. Power driven winches and hoists. Power driven winch :March 2010 to EN :2006+A1:2009 MHE/3 EN : Cranes. Power driven cranes and hoists. Power driven hoists :March 2010 to EN :2006+A1:2009 MHE/3 EN 14655:2005+A1:2010 Food processing machinery. Baguette slicers. Safety and hygiene requirements MCE/3/5 EN 15434:2006+A1:2010 Glass in building. Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) B/520/4 EN 15663: Railway applications. Definition of vehicle reference masses :March 2010 to EN 15663:2009 RAE/1/-/2 EN 15705:2010 Fertilizers. Determination of urea condensates using high performance liquid chromatography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylenurea oligomers (method B) CII/37 EN 15771:2010 Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale STI/36 CEN REPORTS CEN/TR 15932:2010 Plastics. Recommendation for terminology and characterisation of biopolymers and bioplastics PRI/10 CEN TECHNICAL SPECIFICATIONS CEN/TS :2010 Road and airfield surface characteristics. Test methods. Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems B/510/5 CEN/TS 15989:2010 Firefighting vehicles and equipment. Symbols for operator controls and other displays FSH/17 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN :2010 Cable trunking systems and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets PEL/213 EN :2010 Operation of electrical installations. National annexes PEL/99 EN :2010 Alarm systems. CCTV surveillance systems for use in security applications. System requirements GW/1/10 EN :2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). Environmental conditions IST/6 EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks GEL/31 EN 50519:2010 Assessment of workers exposure to electric and magnetic fields of industrial induction heating equipment GEL/106 EN :2010 (IEC CISPR :2010) Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus GEL/210/12 EN 60081: (IEC 60081:1997/A4:2010) Double-capped fluorescent lamps. Performance specifications AMENDMENT 4:March 2010 to EN 60081:1998 CPL/34/1 EN : (IEC :2005) Safety of machinery. Electrical equipment of machines. General requirements :February 2010 to EN :2006 MCE/3 EN : (IEC :2000) Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V A.C. or 1500 V D.C. and not exceeding 36 Kv :February 2010 to EN :2000 MCE/3 EN : (IEC :2004/A1:2010) Specifications for particular types of winding wires. Polyesterimide enamelled round aluminium wire, class 180 :March 2010 to EN :2004 GEL/55 EN : (IEC :1997/A1:2010) Specifications for particular types of winding wires. Polyester-amide-imide enamelled round copper wire, class 200 :March 2010 to EN :1997 GEL/55 EN : (IEC :2009) Household and similar electrical appliances. Safety. Particular requirements for room heaters :March 2010 to EN :2009 CPL/61/07 EN :2010 (IEC :2010) Household and similar electrical appliances. Safety. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor CPL/61/3 38 Prices may be subject to change. Update Standards May 2010

39 EN : (IEC :2007) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Electromagnetic compatibility. Requirements and tests :March 2010 to EN :2007 CH/62/1 EN : (IEC :2008) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Radiation protection in diagnostic x-ray equipment :March 2010 to EN :2008 CH/62/2 EN : (IEC :2006) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Usability :March 2010 to EN :2007 CH/62/1 EN : (IEC :2006) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. General requirements, test and guidance for alarm systems in medical electrical equipment and medical electrical systems :March 2010 to EN :2007 CH/62/1 EN : (IEC :2002) Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements CORRIGENDUM 2:March 2010 to EN :2005 PEL/23 EN 60691: (IEC 60691:2002/A2:2010) Thermal-links. Requirements and application guide AMENDMENT 2:March 2010 to EN 60691:2003 PEL/32 EN :2010 (IEC :2010) Household and similar electrical appliances. Test code for the determination of airborne noise. General requirements CPL/59 EN : (IEC :2000/A2:2008) Automatic electrical controls for household and similar use. Particular requirements for automatic electrical burner control systems AMENDMENT 2:March 2010 to EN :2002 CPL/72 EN :2010 (IEC :2008) Automatic electrical controls for household and similar use. Particular requirements for automatic electrical air flow, water flow and water level sensing controls CPL/72 EN :2010 (IEC :2003/A1:2008) Hand-held motor-operated electric tools. Safety. Particular requirements for screwdrivers and impact wrenches CPL/116 EN :2010 (IEC :2003/A2:2008) Hand-held motor-operated electric tools. Safety. Particular requirements for hammers CPL/116 EN :2010 (IEC :2003/A1:2008) Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws) CPL/116 EN :2010 (IEC :2010) Live working. Insulating sticks and attachable devices. Insulating sticks PEL/78 EN :2010 (IEC :2010) Live working. Insulating sticks and attachable devices. Attachable devices PEL/78 EN 60891:2010 (IEC 60891:2009) Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics GEL/82 EN :2010 (IEC :2009) Photovoltaic devices. Methods of linearity measurement GEL/82 EN :2010 (IEC :2009) Short-circuit currents in three-phase A.C. systems. Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth PEL/73 EN : (IEC :2005/A1:2009) Information technology equipment. Safety. General requirements :March 2010 to EN :2005 EPL/108 EN 60964:2010 (IEC 60964:2009) Nuclear power plants. Control rooms. Design NCE/8 EN :2010 (IEC :2010) Arc welding equipment Installation and use WEE/6 EN : (IEC :2004/A1:2010) Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test :March 2010 to EN :2004 GEL/210/12 EN :2010 (IEC :1993) Safety of transportable motor-operated electric tools. Particular requirements for circular saw benches CPL/116 EN :2010 (IEC :1995) Safety of transportable motor-operated electric tools. Particular requirements for single spindle vertical moulders CPL/116 EN :2010 (IEC :1998) Safety of transportable motor-operated electric tools. Particular requirements for cutting-off grinders CPL/116 EN :2010 (IEC :2010) Global maritime distress and safety system (GMDSS) AIS Search And Rescue Transmitter (AIS-SART). Operational and performance requirements, methods of testing and required test results EPL/80 EN 61226:2010 (IEC 61226:2009) Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions NCE/8 Update Standards May 2010 Prices may be subject to change. 39

40 CENELEC Publications continued... EN : (IEC :2009) Fibre optic communication subsystem test procedures. Digital systems. Jitter and wander measurements :March 2010 to EN :2009 GEL/86/3 EN 61477: (IEC 61477:2009) Live working. Minimum requirements for the utilization of tools, devices and equipment :March 2010 to EN 61477:2009 PEL/78 EN : (IEC :2004) Safety of machinery. Electro-sensitive protective equipment. General requirements and tests :February 2010 to EN :2004 MCE/3 EN :2010 (IEC :2009) Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators. Generic specification EN 62061: (IEC 62061:2005) Safety of machinery. Functional safety of safetyrelated electrical, electronic and programmable electronic control systems :February 2010 to EN 62061:2005 MCE/3 EN 62115: (IEC 62115:2003) Electric toys. Safety INTERPRETATION SHEET 1:MARCH 2010 to EN 62115:2005 CPL/61/21 EN :2010 (IEC :2010) Industrial communication networks. High availability automation networks. General concepts and calculation methods AMT/7 EN :2010 (IEC :2010) Industrial communication networks. High availability automation networks. Media Redundancy Protocol (MRP) AMT/7 EN :2010 (IEC :2010) Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR) AMT/7 EN :2010 (IEC :2010) Industrial communication networks. High availability automation networks. Crossnetwork Redundancy Protocol (CRP) AMT/7 EN :2010 (IEC :2010) Industrial communication networks. High availability automation networks. Beacon Redundancy Protocol (BRP) AMT/7 EN :2010 (IEC :2010) Industrial communication networks. High availability automation networks. Distributed Redundancy Protocol (DRP) AMT/7 EN :2010 (IEC :2009) Medical electrical equipment. Medical image display systems. Evaluation methods CH/62/2 CENELEC REPORTS CLC/TR :2010 Information technology. Implementation of BCT applications using cabling in accordance with EN TCT/7 CLC/TR 50417:2010 Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN series CPL/61 CLC/TR 50485:2010 Electromagnetic compatibility. Emission measurements in fully anechoic chambers GEL/210/12 CENELEC TECHNICAL SPECIFICATIONS CLC/TS :2010 Low-voltage surge protective devices. Surge protective devices for specific application including D.C. Selection and application principles. SPDs connected to photovoltaic installations PEL/37/1 HARMONIZATION DOCUMENTS CENELEC HD :2010 Low-voltage electrical installations. Protection for safety. Protection against overcurrent JPEL/64 CENELEC HD : (IEC :2007) Low-voltage electrical installations. Requirements for special installations or locations. Marinas and similar locations :March 2010 to CENELEC HD :2009 JPEL/64 CENELEC HD :2010 (IEC :2009) Low-voltage electrical installations. Requirements for special installations or locations. Mobile or transportable units JPEL/64 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC :2010 Rotating electrical machines. Specific methods for determining separate losses of large machines from tests. Supplement to IEC members, non-members PEL/2 IEC :2010 (Edition 2) Rotating electrical machines. Functional evaluation of insulation systems. General guidelines members, non-members PEL/2 IEC :2010 Mechanical standardization of semiconductor devices. Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage members, non-members EPL/47 IEC :2010 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482, 6 mm (19 in) series. Adaptation dimensions for subracks and chassis applicable to metric cabinets or racks in accordance with IEC members, non-members EPL/48 IEC :2010 (Edition 4) Specifications for particular types of winding wires. Polyvinyl acetal enamelled round copper wire, class members, non-members GEL/55 40 Prices may be subject to change. Update Standards May 2010

41 New online tool BSI Data Protection Online The Information Commissioner s powers have increased. Are you ready? Be ready find out how you can demonstrate that your practices comply with the Data Protection Act? BSI Data Protection Online has been designed to give you confidence that your Personal Information Management System (PIMS) meets best practice. How will it help you? BSI Data Protection Online fits around your organization, enabling you to access important data protection guidance and conduct selfassessments of your organization. BSI Data Protection Online will allow you to: Undertake a self-assessment process against the requirements of BS Share self-assessments with colleagues, and embed data protection best practice in your organization Create summary, detailed or custom reports on your self-assessments to compare and monitor change Gain confidence that your procedures for managing personal information are lawful and that you can embed these into your organization s core values Deliver a better service to your customers, safe in the knowledge that you are not compromising their trust Continually improve compliance with data protection legislation and best practice Stay informed of your compliance obligations via monthly updates, topical commentaries and case studies written by data protection experts with market experience Work smarter as you review your personal information management processes. Free Trial For a quote, to subscribe or to sign up for a free trial tel +44 (0) or complete the form at: The BSI Data Protection Online library gives you access to: Newsletters on data protection related topics and changes to legislation Monthly updates and additions to the reference library Advice on compliance to the Data Protection Act 1998 Full version of BS 10012:2009 Data protection. Specification for a personal Information management system Advice on specific topics, for example use of and the internet, handling subject access requests and related legislation Case studies, sample policies, forms and templates. Who needs BSI Data Protection Online? It is applicable to any organization that holds personal information and spans all sectors and has no boundaries. It can be applied to both public and private companies and organizations. BSI Data Protection Online has been designed specifically to make it easy to work across multiple sites and with multiple users. Or you can just as easily use it as a stand-alone application. BSI Data Protection Online ensures confidence in your DP compliance and will inspire trust from your employees and customers. Price 495 +VAT for a single user for one year. To buy online visit or contact BSI Customer Services quoting marketing reference code DPOE-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

42 IEC Publications continued... IEC :2010 (Edition 4) Specifications for particular types of winding wires. Polyesterimide enamelled round copper wire, class members, non-members GEL/55 IEC :2010 (Edition 3) Specifications for particular types of winding wires. Polyvinyl acetal enamelled round copper wire, class members, non-members GEL/55 IEC :2010 (Edition 3) Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class members, non-members GEL/55 IEC :2010 (Edition 3) Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class members, non-members GEL/55 IEC :2010 (Edition 3) Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class members, non-members GEL/55 IEC : Specifications for particular types of winding wires. Aromatic polyimide tape wrapped round copper wire, class 240 :March 2010 to IEC : members, non-members GEL/55 IEC : Specifications for particular types of winding wires. Aromatic polyimide tape wrapped rectangular copper wire, class 240 :March 2010 to IEC : members, non-members GEL/55 IEC/TS :2010 (Edition 2) Electrical traction. Rotating electrical machines for rail and road vehicles. Determination of the total losses of converter-fed alternating current motors by summation of the component losses members, non-members GEL/9/2 IEC 60461:2010 (Edition 4) Time and control code members, non-members EPL/100 IEC/TR :2010 Guide for the statistical analysis of ageing test data. Validation of procedures for statistical analysis of censored normally distributed data members, non-members GEL/112 IEC :2010 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7a. Free fall (repeated) members, non-members EPL/48 IEC :2010 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9a. Mechanical operation members, non-members EPL/48 IEC :2010 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9e. Current loading, cyclic members, non-members EPL/48 IEC :2010 Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels members, non-members EPL/48 IEC :2010 Connectors for electronic equipment. Tests and measurements. Magnetic interference tests. Test 24a. Residual magnetism members, non-members EPL/48 IEC :2010 (Edition 3) Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis members, non-members CH/62/4 IEC :2010 (Edition 2) Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray tube assemblies for medical diagnosis members, non-members CH/62/2 IEC :2010 (Edition 2) Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray equipment for interventional procedures members, non-members CH/62/2 IEC :2010 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz members, non-members EPL/48 IEC :2010 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz members, non-members EPL/48 IEC :2010 (Edition 4) Automatic electrical controls for household and similar use. General requirements members, non-members CPL/72 IEC :2010 Live working. Insulating sticks and attachable devices. Insulating sticks members, non-members PEL/78 IEC :2010 Live working. Insulating sticks and attachable devices. Attachable devices members, non-members PEL/78 IEC :2010 Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface coordination dimensions for the 25mm equipment practice. Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC (19 in) members, non-members EPL/48 IEC : Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radiofrequency, electromagnetic field immunity test AMENDMENT 2:March 2010 to IEC : members, non-members GEL/210/12 IEC :2010 (Edition 2) Fibre optic communication subsystem test procedures. General communication subsystems. Central wavelength and spectral width measurement members, non-members GEL/86/3 42 Prices may be subject to change. Update Standards May 2010

43 New The first standard for Data Protection BS 10012:2009 Data protection. Specification for a Personal Information Management System If your organization holds personal information, then it should comply with the requirements of the Data Protection Act (DPA) BS is the first standard published to assist anyone responsible for initiating, implementing and maintaining a Personal Information Management System (PIMS) within an organization. BS s main objective is to enable organizations to put a PIMS in place that provides an infrastructure for maintaining and improving compliance with the DPA. Why do you need BS 10012? The DPA applies to any organization (public and private sector) that holds the personal information of living individuals compliance is required. BS can help you demonstrate compliance with the DPA by: Providing a framework for you to develop an infrastructure for maintaining and improving compliance Allowing you to assess your current level of compliance, recognize weaknesses and opportunities for improvement Enabling effective assessment of compliance by both internal and external assessors Providing a straightforward format, following the management system style of Plan-Do-Check-Act. BS is a management systems standard. Rather than prescribing exactly how operations should be run, it provides the framework that will enable an organization to manage personal information effectively. For example, the standard focuses on ensuring that an organization provides sufficient guidance and resources (e.g. staffing), and creates a positive culture within which data processing can occur. Visit to buy your copy. The Guide to Data Protection is also available. Read more and buy at This standard is the first of its kind in the area of Data Protection it will help organizations demonstrate that they are handling personal information responsibly. Gordon Wanless, Chairman of the DPC BS Drafting Panel and Chair of the Data Protection Forum To buy online visit or contact BSI Customer Services quoting marketing reference code 10012E-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

44 IEC Publications continued... IEC :2010 (Edition 2) Fibre optic communication subsystem test procedures. Digital systems. Receiver sensitivity and overload measurement members, non-members GEL/86/3 IEC/TR :2010 (Edition 2) Optical amplifiers. Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including raman amplifiers members, non-members GEL/86/3 IEC : Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Vibration (sinusoidal) :January 2010 to IEC :2009 IEC :2010 Electrostatics. Protection of electronic devices from electrostatic phenomena. Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices members, non-members GEL/101 IEC :2010 Surface mounting technology. Standard method for the specification of components for through hole reflow (THR) soldering members, non-members EPL/501 IEC : Electromechanical elementary relays. General requirements :March 2010 to IEC :2008 EPL/94 IEC :2010 (Edition 2) Communication networks and systems for power utility automation. Basic communication structure. Compatible logical node classes and data object classes members, non-members PEL/57 IEC/TR :2010 Communication networks and systems for power utility automation. Use of IEC for the communication between substations members, non-members PEL/57 IEC :2010 Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. TEM cell and wideband TEM cell method members, non-members EPL/47 IEC :2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation, and procedures. Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) members, non-members GEL/106 IEC 62438:2010 Radiation protection instrumentation. Mobile instrumentation for the measurement of photon and neutron radiation in the environment members, non-members NCE/2 IEC :2010 Industrial communication networks. High availability automation networks. General concepts and calculation methods members, non-members AMT/7 IEC :2010 Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) members, non-members AMT/7 IEC/TR 62630:2010 Guidance for evaluating exposure from multiple electromagnetic sources members, non-members GEL/106 IEC/TR 62652:2010 Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.af (Powerover-Ethernet) applications members, non-members EPL/48 IEC/PAS PUBLICATIONS IEC/PAS :2010 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors M 12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz members, non-members EPL/48 IEC/PAS :2010 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s members, non-members EPL/48 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 105-C06:2010 (Edition 4) Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering members, non-members TCI/81 ISO 3580:2010 (Edition 3) Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification members, non-members WEE/39 Will not be implemented as a British Standard ISO :2010 (Edition 9) Passenger car tyres and rims. Tyres (metric series) members, non-members AUE/4 ISO 4787:2010 (Edition 2) Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use members, non-members LBI/36/1 ISO :2010 (Edition 2) Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by titration method and classification members, non-members CH/212 ISO :2010 (Edition 2) Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by flame spectrometry and classification members, non-members CH/212 ISO 4986:2010 (Edition 2) Steel castings. Magnetic particle inspection members, non-members ISE/ Prices may be subject to change. Update Standards May 2010

45 ISO 4987:2010 (Edition 2) Steel castings. Liquid penetrant inspection members, non-members ISE/111 ISO :2010 (Edition 4) Rubber compounding ingredients. Silica, precipitated, hydrated. Non-rubber tests members, non-members PRI/23 ISO :2010 (Edition 3) Infusion equipment for medical use. Closures for infusion bottles members, non-members CH/212 ISO :2010 Ergonomics of human-system interaction. Human-centred design for interactive systems members, non-members PH/9 ISO/IEC 11989:2010 Information technology. iscsi management API members, non-members IST/6 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO 12123:2010 (Edition 2) Optics and photonics. Specification of raw optical glass members, non-members CPW/172/3 Will not be implemented as a British Standard ISO 6179:2010 (Edition 4) Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) members, non-members PRI/22 ISO :2010 Layout key for trade documents. Paper-based documents members, non-members ICT/-/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO :2010 (Edition 3) Reciprocating internal combustion engines. Vocabulary of components and systems. Cooling systems members, non-members MCE/14/-/5 ISO :2010 (Edition 2) Reciprocating internal combustion engines. Vocabulary of components and systems. Control and monitoring systems members, non-members MCE/14 ISO :2010 (Edition 2) Safety of toys. Migration of certain elements members, non-members CW/15 Will not be implemented as a British Standard ISO :2010 Safety of toys. Swings, slides and similar activity toys for indoor and outdoor family domestic use members, non-members CW/15 Will not be implemented as a British Standard ISO 10156:2010 (Edition 3) Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets members, non-members PVE/3/1 ISO 10216:2010 (Edition 2) Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method members, non-members STI/32 ISO :2010 (Edition 2) Ceramic tiles. Determination of resistance to deep abrasion for unglazed tiles members, non-members B/539 ISO 11058:2010 (Edition 2) Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load members, non-members B/553 ISO 11161: Safety of machinery. Integrated manufacturing systems. Basic requirements :March 2010 to ISO11161: members, 9.64 non-members MCE/3 ISO :2008 Colorimetry. CIE 1976 L*a*b* Colour space members, non-members STI/14 ISO/TR 12910:2010 Light-frame timber construction. Comparison of four national design documents members, non-members B/518 ISO 13229:2010 Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value members, non-members PRI/88/1 ISO/IEC : Information technology. Coding of audio-visual objects. Reference software AMENDMENT 23:March 2010 to ISO/IEC : members, 9.64 non-members IST/37 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/IEC : Information technology. Coding of audio-visual objects. Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) AMENDMENT 2:March 2010 to ISO/IEC : members, 9.64 non-members IST/37 Will not be implemented as a British Standard ISO 15206:2010 Timber poles. Basic requirements and test methods members, non-members B/518 Will not be implemented as a British Standard ISO 16972:2010 Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement members, non-members PH/4 Update Standards May 2010 Prices may be subject to change. 45

46 ISO Publications continued... ISO : Petroleum and natural gas industries. Drilling and production equipment. Side-pocket mandrels :March 2010 to ISO : members, 9.64 non-members PSE/17/-/4 ISO 17386:2010 (Edition 2) Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the pollutant concentration parameter members, non-members EPL/278 ISO/IEC TR 19791:2010 (Edition 2) Information technology. Security techniques. Security assessment of operational systems members, non-members IST/33 ISO :2010 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. External concrete coatings members, non-members PSE/17/2 ISO/TS :2009 Prerequisite programmes on food safety. Food manufacturing members, non-members AW/90 ISO 22840:2010 Intelligent transport systems. Devices to aid reverse manoeuvres. Extended range backing aid systems (ERBA) members, non-members EPL/278 ISO/TS 22939:2010 Soil quality. Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates members, non-members EH/4 ISO/IEC :2010 Information technology. Real-time locating systems (RTLS). Chirp spread spectrum (CSS) at 2,4 GHz air interface members, non-members IST/34 ISO/IEC :2010 Information technology. AT attachment with packet interface-7. Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3) members, non-members IST/6 Will not be implemented as a British Standard ISO 25337:2010 Plastics. Production quality control. Statistical method for using single measurements members, non-members PRI/21 Will not be implemented as a British Standard ISO/TR 25743:2010 Lifts (elevators). Study of the use of lifts for evacuation during an emergency members, non-members MHE/4 ISO 27186:2010 Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements members, non-members CH/150/6 ISO 27427:2010 (Edition 2) Anaesthetic and respiratory equipment. Nebulizing systems and components members, non-members CH/121/5 Will not be implemented as a British Standard ISO 28640:2010 Random variate generation methods members, non-members SS/5 ISO :2010 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet members, non-members MCE/3 ISO :2010 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet members, non-members MCE/3 ISO :2010 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the pollutant concentration parameter members, non-members MCE/3 ISO/IEC TR :2010 Information technology. Intelligent homes. Taxonomy of specifications. Taxonomy method members, non-members IST/6/-/12 Will not be implemented as a British Standard ISO 29441:2010 Water quality. Determination of total nitrogen after UV digestion. Method using flow analysis (CFA and FIA) and spectrometric detection members, non-members EH/3/2 Will not be implemented as a British Standard ISO/IEC TR :2010 Information technology. Biometric sample quality. Finger image data members, non-members IST/44 ISO/IEC TR :2010 Information technology. Biometric sample quality. Face image data members, non-members IST/44 ISO/PAS PUBLICATIONS ISO/PAS 3930:2009 Instruments for measuring vehicle exhaust emissions. Metrological and technical requirements. Metrological control and performance tests members, non-members MCE/22 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you 46 Prices may be subject to change. Update Standards May 2010

47 New book Quality Service, Competitive Business: Setting the Standard in Customer Service Howard Kendall This new book is the definitive guide to world-class customer service delivery, offering an invaluable resource for any business with customer service personnel. Customer retention is the key to business success and this book will help you to achieve excellence in serving your customers by putting the role, leadership and strategy of customer service operations into a business-aligned and integrated perspective. Using BSI s customer service standards, the book highlights the structure and organization of staff, and gives advice on how to achieve the best operational mix. Emphasis is on the importance of best practice processes and using them to: Achieve a great customer experience Set and meet targets Measure performance statistics to gauge successful service delivery and areas for improvement. Who should read this book? Any business with a customer services team Customer service managers and representatives Customer relationship managers and complaints handling managers HR personnel All public sector bodies. Read more and buy at To buy please visit or contact BSI Customer Services quoting marketing reference 2189E-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010 New book Managing Security in Outsourced and Off-shored Environments. How to Safeguard Intellectual Assets in a Virtual Business World David Lacey If you need a working knowledge of how to implement and manage outsourcing and off-shoring of IT and business services, then this is the book for you. Even if you have no prior knowledge of the subject, the book s focus on the practical along with the specialist aspects of security management will give you a firm grounding. Access insights, tips and the warnings associated with outsourcing, including the three highly persuasive factors that will help you convince your managing director to see the benefits of externalizing supplies and services, whilst managing the risks. Clearly laid out, the book sets out guidance, best practice and critical success factors for managing security risks. For the impatient amongst you, the key learning points contained in each chapter are a useful starting point for grasping the salient issues. Buy the book and follow the real-life experiences of designing and managing large scale outsourcing programmes, so you too can harness the powerful business practices that are capable of delivering impressive cost savings and operational benefits. Read more and buy at To buy please visit or contact BSI Customer Services quoting marketing reference 0116E-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

48 New standard BS ISO 31000:2009 Risk management. Principles and guidelines BS ISO is the international standard for risk management. It provides principles and generic guidelines on risk management. BS ISO is a useful standard for any public, private or community enterprise, association, business, group or individual. BS ISO applies to any activity in a business including strategies and decisions, operations, processes, functions, projects, products, services and assets. It also applies to any type of risk, whatever its nature, whether having positive or negative consequences. While all organizations manage risk to some degree, BS ISO establishes a number of principles to make risk management effective. It recommends that organizations develop, implement and continuously improve a framework to integrate the process for managing risk into the organization's overall governance, strategy and planning, management, reporting processes, policies, values and culture. Who should use BS ISO 31000? BS ISO can be used by anyone but is extremely useful to: Risk Managers Internal Auditors Business Continuity Managers Risk Management Consultants. What can BS ISO do for you? BS ISO can help you: Improve operational effectiveness and efficiency Minimize losses Improve governance Improve controls Improve stakeholder confidence and trust Establish a reliable basis for decision making and planning Encourage proactive management Improve the identification of opportunities and threats Enhanced health and safety performance, as well as environmental protection Improve organizational learning Improve organizational resilience. Buy at To buy online visit or contact BSI Customer Services quoting marketing reference code 31000E-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010